esphome 2025.3.3__py3-none-any.whl → 2025.4.0__py3-none-any.whl

esphome/components/rp2040_pwm/output.py

@@ -1,12 +1,8 @@
-from esphome import pins, automation
+from esphome import automation, pins
+import esphome.codegen as cg
 from esphome.components import output
 import esphome.config_validation as cv
-import esphome.codegen as cg
-from esphome.const import (
-    CONF_FREQUENCY,
-    CONF_ID,
-    CONF_PIN,
-)
+from esphome.const import CONF_FREQUENCY, CONF_ID, CONF_PIN
 
 CODEOWNERS = ["@jesserockz"]
 DEPENDENCIES = ["rp2040"]

esphome/components/rtttl/__init__.py

@@ -1,19 +1,19 @@
 import logging
-import esphome.codegen as cg
-import esphome.config_validation as cv
-import esphome.final_validate as fv
+
 from esphome import automation
+import esphome.codegen as cg
 from esphome.components.output import FloatOutput
 from esphome.components.speaker import Speaker
-
+import esphome.config_validation as cv
 from esphome.const import (
+    CONF_GAIN,
     CONF_ID,
     CONF_OUTPUT,
     CONF_PLATFORM,
-    CONF_TRIGGER_ID,
     CONF_SPEAKER,
-    CONF_GAIN,
+    CONF_TRIGGER_ID,
 )
+import esphome.final_validate as fv
 
 _LOGGER = logging.getLogger(__name__)
 

esphome/components/ruuvi_ble/__init__.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import esp32_ble_tracker
+import esphome.config_validation as cv
 from esphome.const import CONF_ID
 
 DEPENDENCIES = ["esp32_ble_tracker"]

esphome/components/ruuvitag/sensor.py

@@ -1,38 +1,38 @@
 import esphome.codegen as cg
+from esphome.components import esp32_ble_tracker, sensor
 import esphome.config_validation as cv
-from esphome.components import sensor, esp32_ble_tracker
 from esphome.const import (
-    CONF_HUMIDITY,
-    CONF_MAC_ADDRESS,
-    CONF_TEMPERATURE,
-    CONF_PRESSURE,
     CONF_ACCELERATION,
     CONF_ACCELERATION_X,
     CONF_ACCELERATION_Y,
     CONF_ACCELERATION_Z,
     CONF_BATTERY_VOLTAGE,
-    CONF_TX_POWER,
+    CONF_HUMIDITY,
+    CONF_ID,
+    CONF_MAC_ADDRESS,
     CONF_MEASUREMENT_SEQUENCE_NUMBER,
     CONF_MOVEMENT_COUNTER,
+    CONF_PRESSURE,
+    CONF_TEMPERATURE,
+    CONF_TX_POWER,
     DEVICE_CLASS_HUMIDITY,
     DEVICE_CLASS_PRESSURE,
     DEVICE_CLASS_SIGNAL_STRENGTH,
     DEVICE_CLASS_TEMPERATURE,
     DEVICE_CLASS_VOLTAGE,
     ENTITY_CATEGORY_DIAGNOSTIC,
-    STATE_CLASS_MEASUREMENT,
-    UNIT_CELSIUS,
-    UNIT_PERCENT,
-    UNIT_VOLT,
-    UNIT_HECTOPASCAL,
-    UNIT_G,
-    UNIT_DECIBEL_MILLIWATT,
-    ICON_GAUGE,
     ICON_ACCELERATION,
     ICON_ACCELERATION_X,
     ICON_ACCELERATION_Y,
     ICON_ACCELERATION_Z,
-    CONF_ID,
+    ICON_GAUGE,
+    STATE_CLASS_MEASUREMENT,
+    UNIT_CELSIUS,
+    UNIT_DECIBEL_MILLIWATT,
+    UNIT_G,
+    UNIT_HECTOPASCAL,
+    UNIT_PERCENT,
+    UNIT_VOLT,
 )
 
 DEPENDENCIES = ["esp32_ble_tracker"]

esphome/components/safe_mode/__init__.py

@@ -1,4 +1,4 @@
-from esphome.cpp_generator import RawExpression
+from esphome import automation
 import esphome.codegen as cg
 import esphome.config_validation as cv
 from esphome.const import (
@@ -11,8 +11,7 @@ from esphome.const import (
     KEY_PAST_SAFE_MODE,
 )
 from esphome.core import CORE, coroutine_with_priority
-from esphome import automation
-
+from esphome.cpp_generator import RawExpression
 
 CODEOWNERS = ["@paulmonigatti", "@jsuanet", "@kbx81"]
 

esphome/components/safe_mode/button/__init__.py

@@ -1,13 +1,14 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import button
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_SAFE_MODE,
     DEVICE_CLASS_RESTART,
     ENTITY_CATEGORY_CONFIG,
     ICON_RESTART_ALERT,
 )
-from .. import safe_mode_ns, SafeModeComponent
+
+from .. import SafeModeComponent, safe_mode_ns
 
 DEPENDENCIES = ["safe_mode"]
 

esphome/components/safe_mode/switch/__init__.py

@@ -1,12 +1,9 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import switch
-from esphome.const import (
-    CONF_SAFE_MODE,
-    ENTITY_CATEGORY_CONFIG,
-    ICON_RESTART_ALERT,
-)
-from .. import safe_mode_ns, SafeModeComponent
+import esphome.config_validation as cv
+from esphome.const import CONF_SAFE_MODE, ENTITY_CATEGORY_CONFIG, ICON_RESTART_ALERT
+
+from .. import SafeModeComponent, safe_mode_ns
 
 DEPENDENCIES = ["safe_mode"]
 

esphome/components/scd30/sensor.py

@@ -1,23 +1,22 @@
 from esphome import automation, core
 import esphome.codegen as cg
+from esphome.components import i2c, sensirion_common, sensor
 import esphome.config_validation as cv
-from esphome.components import i2c, sensor
-from esphome.components import sensirion_common
 from esphome.const import (
-    CONF_ID,
+    CONF_CO2,
     CONF_HUMIDITY,
+    CONF_ID,
     CONF_TEMPERATURE,
-    CONF_CO2,
     CONF_TEMPERATURE_OFFSET,
     CONF_UPDATE_INTERVAL,
     CONF_VALUE,
     DEVICE_CLASS_CARBON_DIOXIDE,
     DEVICE_CLASS_HUMIDITY,
     DEVICE_CLASS_TEMPERATURE,
-    STATE_CLASS_MEASUREMENT,
-    UNIT_PARTS_PER_MILLION,
     ICON_MOLECULE_CO2,
+    STATE_CLASS_MEASUREMENT,
     UNIT_CELSIUS,
+    UNIT_PARTS_PER_MILLION,
     UNIT_PERCENT,
 )
 

esphome/components/scd4x/sensor.py

@@ -1,26 +1,24 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
-from esphome.components import i2c, sensor
-from esphome.components import sensirion_common
 from esphome import automation
 from esphome.automation import maybe_simple_id
-
+import esphome.codegen as cg
+from esphome.components import i2c, sensirion_common, sensor
+import esphome.config_validation as cv
 from esphome.const import (
-    CONF_ID,
     CONF_CO2,
     CONF_HUMIDITY,
+    CONF_ID,
     CONF_TEMPERATURE,
     CONF_TEMPERATURE_OFFSET,
     CONF_VALUE,
     DEVICE_CLASS_CARBON_DIOXIDE,
     DEVICE_CLASS_HUMIDITY,
     DEVICE_CLASS_TEMPERATURE,
-    STATE_CLASS_MEASUREMENT,
-    UNIT_PARTS_PER_MILLION,
     ICON_MOLECULE_CO2,
     ICON_THERMOMETER,
     ICON_WATER_PERCENT,
+    STATE_CLASS_MEASUREMENT,
     UNIT_CELSIUS,
+    UNIT_PARTS_PER_MILLION,
     UNIT_PERCENT,
 )
 

esphome/components/script/__init__.py

@@ -1,7 +1,7 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import automation
 from esphome.automation import maybe_simple_id
+import esphome.codegen as cg
+import esphome.config_validation as cv
 from esphome.const import CONF_ID, CONF_MODE, CONF_PARAMETERS, CONF_RESTART
 from esphome.core import CORE, EsphomeError
 

esphome/components/sdl/display.py

@@ -1,14 +1,14 @@
 import subprocess
 
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import display
+import esphome.config_validation as cv
 from esphome.const import (
-    CONF_ID,
     CONF_DIMENSIONS,
-    CONF_WIDTH,
     CONF_HEIGHT,
+    CONF_ID,
     CONF_LAMBDA,
+    CONF_WIDTH,
     PLATFORM_HOST,
 )
 

esphome/components/sdl/touchscreen/__init__.py

@@ -1,9 +1,9 @@
 import esphome.codegen as cg
+from esphome.components import touchscreen
 import esphome.config_validation as cv
 from esphome.const import CONF_ID
 
-from esphome.components import touchscreen
-from ..display import Sdl, sdl_ns, CONF_SDL_ID
+from ..display import CONF_SDL_ID, Sdl, sdl_ns
 
 SdlTouchscreen = sdl_ns.class_("SdlTouchscreen", touchscreen.Touchscreen)
 

esphome/components/sdm_meter/sensor.py

@@ -1,14 +1,13 @@
-from esphome.components.atm90e32.sensor import CONF_PHASE_A, CONF_PHASE_B, CONF_PHASE_C
 import esphome.codegen as cg
+from esphome.components import modbus, sensor
+from esphome.components.atm90e32.sensor import CONF_PHASE_A, CONF_PHASE_B, CONF_PHASE_C
 import esphome.config_validation as cv
-from esphome.components import sensor, modbus
 from esphome.const import (
     CONF_ACTIVE_POWER,
     CONF_APPARENT_POWER,
     CONF_CURRENT,
     CONF_EXPORT_ACTIVE_ENERGY,
     CONF_EXPORT_REACTIVE_ENERGY,
-    CONF_TOTAL_POWER,
     CONF_FREQUENCY,
     CONF_ID,
     CONF_IMPORT_ACTIVE_ENERGY,
@@ -16,6 +15,7 @@ from esphome.const import (
     CONF_PHASE_ANGLE,
     CONF_POWER_FACTOR,
     CONF_REACTIVE_POWER,
+    CONF_TOTAL_POWER,
     CONF_VOLTAGE,
     DEVICE_CLASS_CURRENT,
     DEVICE_CLASS_ENERGY,

esphome/components/sdp3x/sensor.py

@@ -1,7 +1,6 @@
 import esphome.codegen as cg
+from esphome.components import i2c, sensirion_common, sensor
 import esphome.config_validation as cv
-from esphome.components import i2c, sensor
-from esphome.components import sensirion_common
 from esphome.const import (
     DEVICE_CLASS_PRESSURE,
     STATE_CLASS_MEASUREMENT,

esphome/components/sds011/sensor.py

@@ -1,17 +1,17 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import sensor, uart
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_ID,
-    CONF_PM_10_0,
     CONF_PM_2_5,
+    CONF_PM_10_0,
     CONF_RX_ONLY,
     CONF_UPDATE_INTERVAL,
-    DEVICE_CLASS_PM25,
     DEVICE_CLASS_PM10,
+    DEVICE_CLASS_PM25,
+    ICON_CHEMICAL_WEAPON,
     STATE_CLASS_MEASUREMENT,
     UNIT_MICROGRAMS_PER_CUBIC_METER,
-    ICON_CHEMICAL_WEAPON,
 )
 
 DEPENDENCIES = ["uart"]

esphome/components/seeed_mr24hpc1/__init__.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import uart
+import esphome.config_validation as cv
 from esphome.const import CONF_ID
 
 DEPENDENCIES = ["uart"]

esphome/components/seeed_mr24hpc1/binary_sensor.py

@@ -1,12 +1,9 @@
 import esphome.codegen as cg
 from esphome.components import binary_sensor
 import esphome.config_validation as cv
-from esphome.const import (
-    DEVICE_CLASS_OCCUPANCY,
-    CONF_HAS_TARGET,
-)
-from . import CONF_MR24HPC1_ID, MR24HPC1Component
+from esphome.const import CONF_HAS_TARGET, DEVICE_CLASS_OCCUPANCY
 
+from . import CONF_MR24HPC1_ID, MR24HPC1Component
 
 CONFIG_SCHEMA = {
     cv.GenerateID(CONF_MR24HPC1_ID): cv.use_id(MR24HPC1Component),

esphome/components/seeed_mr24hpc1/button/__init__.py

@@ -7,6 +7,7 @@ from esphome.const import (
     ENTITY_CATEGORY_CONFIG,
     ICON_RESTART_ALERT,
 )
+
 from .. import CONF_MR24HPC1_ID, MR24HPC1Component, mr24hpc1_ns
 
 RestartButton = mr24hpc1_ns.class_("RestartButton", button.Button)

esphome/components/seeed_mr24hpc1/number/__init__.py

@@ -1,10 +1,8 @@
 import esphome.codegen as cg
 from esphome.components import number
 import esphome.config_validation as cv
-from esphome.const import (
-    CONF_SENSITIVITY,
-    ENTITY_CATEGORY_CONFIG,
-)
+from esphome.const import CONF_SENSITIVITY, ENTITY_CATEGORY_CONFIG
+
 from .. import CONF_MR24HPC1_ID, MR24HPC1Component, mr24hpc1_ns
 
 SensitivityNumber = mr24hpc1_ns.class_("SensitivityNumber", number.Number)

esphome/components/seeed_mr24hpc1/select/__init__.py

@@ -1,9 +1,8 @@
 import esphome.codegen as cg
 from esphome.components import select
 import esphome.config_validation as cv
-from esphome.const import (
-    ENTITY_CATEGORY_CONFIG,
-)
+from esphome.const import ENTITY_CATEGORY_CONFIG
+
 from .. import CONF_MR24HPC1_ID, MR24HPC1Component, mr24hpc1_ns
 
 SceneModeSelect = mr24hpc1_ns.class_("SceneModeSelect", select.Select)

esphome/components/seeed_mr24hpc1/sensor.py

@@ -7,6 +7,7 @@ from esphome.const import (
     DEVICE_CLASS_SPEED,
     UNIT_METER,
 )
+
 from . import CONF_MR24HPC1_ID, MR24HPC1Component
 
 CONF_CUSTOM_PRESENCE_OF_DETECTION = "custom_presence_of_detection"

esphome/components/seeed_mr24hpc1/switch/__init__.py

@@ -1,10 +1,8 @@
 import esphome.codegen as cg
 from esphome.components import switch
 import esphome.config_validation as cv
-from esphome.const import (
-    DEVICE_CLASS_SWITCH,
-    ENTITY_CATEGORY_CONFIG,
-)
+from esphome.const import DEVICE_CLASS_SWITCH, ENTITY_CATEGORY_CONFIG
+
 from .. import CONF_MR24HPC1_ID, MR24HPC1Component, mr24hpc1_ns
 
 UnderlyingOpenFuncSwitch = mr24hpc1_ns.class_(

esphome/components/seeed_mr24hpc1/text_sensor.py

@@ -2,6 +2,7 @@ import esphome.codegen as cg
 from esphome.components import text_sensor
 import esphome.config_validation as cv
 from esphome.const import ENTITY_CATEGORY_DIAGNOSTIC
+
 from . import CONF_MR24HPC1_ID, MR24HPC1Component
 
 CONF_HEART_BEAT = "heart_beat"

esphome/components/seeed_mr60bha2/binary_sensor.py

@@ -1,10 +1,8 @@
 import esphome.codegen as cg
 from esphome.components import binary_sensor
 import esphome.config_validation as cv
-from esphome.const import (
-    DEVICE_CLASS_OCCUPANCY,
-    CONF_HAS_TARGET,
-)
+from esphome.const import CONF_HAS_TARGET, DEVICE_CLASS_OCCUPANCY
+
 from . import CONF_MR60BHA2_ID, MR60BHA2Component
 
 DEPENDENCIES = ["seeed_mr60bha2"]

esphome/components/seeed_mr60bha2/sensor.py

@@ -4,10 +4,10 @@ import esphome.config_validation as cv
 from esphome.const import (
     CONF_DISTANCE,
     DEVICE_CLASS_DISTANCE,
+    ICON_COUNTER,
     ICON_HEART_PULSE,
     ICON_PULSE,
     ICON_SIGNAL,
-    ICON_COUNTER,
     STATE_CLASS_MEASUREMENT,
     UNIT_BEATS_PER_MINUTE,
     UNIT_CENTIMETER,

esphome/components/seeed_mr60fda2/button/__init__.py

@@ -2,11 +2,11 @@ import esphome.codegen as cg
 from esphome.components import button
 import esphome.config_validation as cv
 from esphome.const import (
+    CONF_FACTORY_RESET,
     DEVICE_CLASS_RESTART,
     DEVICE_CLASS_UPDATE,
     ENTITY_CATEGORY_DIAGNOSTIC,
     ENTITY_CATEGORY_NONE,
-    CONF_FACTORY_RESET,
 )
 
 from .. import CONF_MR60FDA2_ID, MR60FDA2Component, mr60fda2_ns

esphome/components/seeed_mr60fda2/select/__init__.py

@@ -5,7 +5,6 @@ from esphome.const import CONF_SENSITIVITY, ENTITY_CATEGORY_CONFIG, ICON_ACCELER
 
 from .. import CONF_MR60FDA2_ID, MR60FDA2Component, mr60fda2_ns
 
-
 DEPENDENCIES = ["seeed_mr60fda2"]
 
 InstallHeightSelect = mr60fda2_ns.class_("InstallHeightSelect", select.Select)

esphome/components/selec_meter/sensor.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
+from esphome.components import modbus, sensor
 import esphome.config_validation as cv
-from esphome.components import sensor, modbus
 from esphome.const import (
     CONF_ACTIVE_POWER,
     CONF_APPARENT_POWER,

esphome/components/sen0321/sensor.py

@@ -1,10 +1,10 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import i2c, sensor
+import esphome.config_validation as cv
 from esphome.const import (
     ICON_CHEMICAL_WEAPON,
-    UNIT_PARTS_PER_BILLION,
     STATE_CLASS_MEASUREMENT,
+    UNIT_PARTS_PER_BILLION,
 )
 
 CODEOWNERS = ["@notjj"]

esphome/components/sen21231/sensor.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import i2c, sensor
+import esphome.config_validation as cv
 from esphome.const import ICON_MOTION_SENSOR
 
 CODEOWNERS = ["@shreyaskarnik"]

esphome/components/senseair/sensor.py

@@ -1,13 +1,13 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import automation
 from esphome.automation import maybe_simple_id
+import esphome.codegen as cg
 from esphome.components import sensor, uart
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_CO2,
     CONF_ID,
-    ICON_MOLECULE_CO2,
     DEVICE_CLASS_CARBON_DIOXIDE,
+    ICON_MOLECULE_CO2,
     STATE_CLASS_MEASUREMENT,
     UNIT_PARTS_PER_MILLION,
 )

esphome/components/sensirion_common/__init__.py

@@ -1,8 +1,6 @@
 import esphome.codegen as cg
-
 from esphome.components import i2c
 
-
 CODEOWNERS = ["@martgras"]
 
 sensirion_common_ns = cg.esphome_ns.namespace("sensirion_common")

esphome/components/servo/__init__.py

@@ -1,15 +1,15 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import automation
 from esphome.automation import maybe_simple_id
+import esphome.codegen as cg
 from esphome.components.output import FloatOutput
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_ID,
     CONF_IDLE_LEVEL,
+    CONF_LEVEL,
     CONF_MAX_LEVEL,
     CONF_MIN_LEVEL,
     CONF_OUTPUT,
-    CONF_LEVEL,
     CONF_RESTORE,
     CONF_TRANSITION_LENGTH,
 )

esphome/components/sfa30/sensor.py

@@ -1,22 +1,21 @@
 import esphome.codegen as cg
+from esphome.components import i2c, sensirion_common, sensor
 import esphome.config_validation as cv
-from esphome.components import i2c, sensor, sensirion_common
-
 from esphome.const import (
-    CONF_ID,
     CONF_FORMALDEHYDE,
     CONF_HUMIDITY,
+    CONF_ID,
     CONF_TEMPERATURE,
     DEVICE_CLASS_GAS,
     DEVICE_CLASS_HUMIDITY,
     DEVICE_CLASS_TEMPERATURE,
     ICON_RADIATOR,
-    ICON_WATER_PERCENT,
     ICON_THERMOMETER,
+    ICON_WATER_PERCENT,
     STATE_CLASS_MEASUREMENT,
+    UNIT_CELSIUS,
     UNIT_PARTS_PER_BILLION,
     UNIT_PERCENT,
-    UNIT_CELSIUS,
 )
 
 CODEOWNERS = ["@ghsensdev"]

esphome/components/sgp4x/sensor.py

@@ -1,13 +1,13 @@
 import esphome.codegen as cg
+from esphome.components import i2c, sensirion_common, sensor
 import esphome.config_validation as cv
-from esphome.components import i2c, sensor, sensirion_common
 from esphome.const import (
     CONF_COMPENSATION,
     CONF_ID,
     CONF_STORE_BASELINE,
     CONF_TEMPERATURE_SOURCE,
-    ICON_RADIATOR,
     DEVICE_CLASS_AQI,
+    ICON_RADIATOR,
     STATE_CLASS_MEASUREMENT,
 )
 

esphome/components/shelly_dimmer/light.py

@@ -1,32 +1,32 @@
-from pathlib import Path
 import hashlib
+from pathlib import Path
 import re
-import requests
 
+import requests
 
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import pins
+import esphome.codegen as cg
 from esphome.components import light, sensor, uart
+import esphome.config_validation as cv
 from esphome.const import (
-    CONF_OUTPUT_ID,
+    CONF_CURRENT,
     CONF_GAMMA_CORRECT,
+    CONF_MAX_BRIGHTNESS,
+    CONF_MIN_BRIGHTNESS,
+    CONF_OUTPUT_ID,
     CONF_POWER,
-    CONF_VOLTAGE,
-    CONF_CURRENT,
-    CONF_VERSION,
-    CONF_URL,
     CONF_UPDATE_INTERVAL,
-    UNIT_VOLT,
-    UNIT_AMPERE,
-    UNIT_WATT,
+    CONF_URL,
+    CONF_VERSION,
+    CONF_VOLTAGE,
+    DEVICE_CLASS_CURRENT,
     DEVICE_CLASS_POWER,
     DEVICE_CLASS_VOLTAGE,
-    DEVICE_CLASS_CURRENT,
-    CONF_MIN_BRIGHTNESS,
-    CONF_MAX_BRIGHTNESS,
+    UNIT_AMPERE,
+    UNIT_VOLT,
+    UNIT_WATT,
 )
-from esphome.core import HexInt, CORE
+from esphome.core import CORE, HexInt
 
 DOMAIN = "shelly_dimmer"
 AUTO_LOAD = ["sensor"]

esphome/components/sht3xd/sensor.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
+from esphome.components import i2c, sensirion_common, sensor
 import esphome.config_validation as cv
-from esphome.components import i2c, sensor, sensirion_common
 from esphome.const import (
     CONF_HUMIDITY,
     CONF_ID,