esphome 2025.3.3__py3-none-any.whl → 2025.4.0__py3-none-any.whl

esphome/components/sonoff_d1/light.py

@@ -1,11 +1,7 @@
 import esphome.codegen as cg
+from esphome.components import light, uart
 import esphome.config_validation as cv
-from esphome.components import uart, light
-from esphome.const import (
-    CONF_OUTPUT_ID,
-    CONF_MIN_VALUE,
-    CONF_MAX_VALUE,
-)
+from esphome.const import CONF_MAX_VALUE, CONF_MIN_VALUE, CONF_OUTPUT_ID
 
 CONF_USE_RM433_REMOTE = "use_rm433_remote"
 

esphome/components/speaker/media_player/audio_pipeline.cpp

@@ -441,9 +441,10 @@ void AudioPipeline::decode_task(void *params) {
                                                  pdFALSE,                                    // Wait for all the bits,
                                                  portMAX_DELAY);  // Block indefinitely until bit is set
 
+    xEventGroupClearBits(this_pipeline->event_group_,
+                         EventGroupBits::DECODER_MESSAGE_FINISHED | EventGroupBits::READER_MESSAGE_LOADED_MEDIA_TYPE);
+
     if (!(event_bits & EventGroupBits::PIPELINE_COMMAND_STOP)) {
-      xEventGroupClearBits(this_pipeline->event_group_,
-                           EventGroupBits::DECODER_MESSAGE_FINISHED | EventGroupBits::READER_MESSAGE_LOADED_MEDIA_TYPE);
       InfoErrorEvent event;
       event.source = InfoErrorSource::DECODER;
 

esphome/components/speed/fan/__init__.py

@@ -1,13 +1,13 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import fan, output
 from esphome.components.fan import validate_preset_modes
+import esphome.config_validation as cv
 from esphome.const import (
-    CONF_PRESET_MODES,
     CONF_DIRECTION_OUTPUT,
     CONF_OSCILLATION_OUTPUT,
     CONF_OUTPUT,
     CONF_OUTPUT_ID,
+    CONF_PRESET_MODES,
     CONF_SPEED,
     CONF_SPEED_COUNT,
 )

esphome/components/spi/__init__.py

@@ -37,6 +37,7 @@ CODEOWNERS = ["@esphome/core", "@clydebarrow"]
 spi_ns = cg.esphome_ns.namespace("spi")
 SPIComponent = spi_ns.class_("SPIComponent", cg.Component)
 QuadSPIComponent = spi_ns.class_("QuadSPIComponent", cg.Component)
+OctalSPIComponent = spi_ns.class_("OctalSPIComponent", cg.Component)
 SPIDevice = spi_ns.class_("SPIDevice")
 SPIDataRate = spi_ns.enum("SPIDataRate")
 SPIMode = spi_ns.enum("SPIMode")
@@ -78,6 +79,13 @@ CONF_INTERFACE = "interface"
 CONF_INTERFACE_INDEX = "interface_index"
 TYPE_SINGLE = "single"
 TYPE_QUAD = "quad"
+TYPE_OCTAL = "octal"
+
+TYPE_CLASS = {
+    TYPE_SINGLE: SPIComponent,
+    TYPE_QUAD: QuadSPIComponent,
+    TYPE_OCTAL: OctalSPIComponent,
+}
 
 # RP2040 SPI pin assignments are complicated;
 # refer to GPIO function select table in https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf
@@ -230,7 +238,7 @@ def validate_spi_config(config):
         ):
             raise cv.Invalid("Invalid pin selections for hardware SPI interface")
         if CONF_DATA_PINS in spi and CONF_INTERFACE_INDEX not in spi:
-            raise cv.Invalid("Quad mode requires a hardware interface")
+            raise cv.Invalid("Quad and octal modes requires a hardware interface")
 
     return config
 
@@ -251,7 +259,7 @@ def get_spi_interface(index):
     return "new SPIClass(HSPI)"
 
 
-SPI_SCHEMA = cv.All(
+SPI_SINGLE_SCHEMA = cv.All(
     cv.Schema(
         {
             cv.GenerateID(): cv.declare_id(SPIComponent),
@@ -266,7 +274,7 @@ SPI_SCHEMA = cv.All(
                 lower=True,
             ),
             cv.Optional(CONF_DATA_PINS): cv.invalid(
-                "'data_pins' should be used with 'type: quad' only"
+                "'data_pins' should be used with 'type: quad or octal' only"
             ),
         }
     ),
@@ -274,38 +282,41 @@ SPI_SCHEMA = cv.All(
     cv.only_on([PLATFORM_ESP32, PLATFORM_ESP8266, PLATFORM_RP2040]),
 )
 
-SPI_QUAD_SCHEMA = cv.All(
-    cv.Schema(
-        {
-            cv.GenerateID(): cv.declare_id(QuadSPIComponent),
-            cv.Required(CONF_CLK_PIN): pins.gpio_output_pin_schema,
-            cv.Required(CONF_DATA_PINS): cv.All(
-                cv.ensure_list(pins.internal_gpio_output_pin_number),
-                cv.Length(min=4, max=4),
-            ),
-            cv.Optional(CONF_INTERFACE, default="hardware"): cv.one_of(
-                *sum(get_hw_interface_list(), ["hardware"]),
-                lower=True,
-            ),
-            cv.Optional(CONF_MISO_PIN): cv.invalid(
-                "'miso_pin' should not be used with quad SPI"
-            ),
-            cv.Optional(CONF_MOSI_PIN): cv.invalid(
-                "'mosi_pin' should not be used with quad SPI"
-            ),
-        }
-    ),
-    cv.only_on([PLATFORM_ESP32]),
-    cv.only_with_esp_idf,
-)
+
+def spi_mode_schema(mode):
+    if mode == TYPE_SINGLE:
+        return SPI_SINGLE_SCHEMA
+    pin_count = 4 if mode == TYPE_QUAD else 8
+    return cv.All(
+        cv.Schema(
+            {
+                cv.GenerateID(): cv.declare_id(TYPE_CLASS[mode]),
+                cv.Required(CONF_CLK_PIN): pins.gpio_output_pin_schema,
+                cv.Required(CONF_DATA_PINS): cv.All(
+                    cv.ensure_list(pins.internal_gpio_output_pin_number),
+                    cv.Length(min=pin_count, max=pin_count),
+                ),
+                cv.Optional(CONF_INTERFACE, default="hardware"): cv.one_of(
+                    *sum(get_hw_interface_list(), ["hardware"]),
+                    lower=True,
+                ),
+                cv.Optional(CONF_MISO_PIN): cv.invalid(
+                    f"'miso_pin' should not be used with {mode} SPI"
+                ),
+                cv.Optional(CONF_MOSI_PIN): cv.invalid(
+                    f"'mosi_pin' should not be used with {mode} SPI"
+                ),
+            }
+        ),
+        cv.only_on([PLATFORM_ESP32]),
+        cv.only_with_esp_idf,
+    )
+
 
 CONFIG_SCHEMA = cv.All(
     cv.ensure_list(
         cv.typed_schema(
-            {
-                TYPE_SINGLE: SPI_SCHEMA,
-                TYPE_QUAD: SPI_QUAD_SCHEMA,
-            },
+            {k: spi_mode_schema(k) for k in TYPE_CLASS},
             default_type=TYPE_SINGLE,
         )
     ),
@@ -344,19 +355,17 @@ def spi_device_schema(
     cs_pin_required=True,
     default_data_rate=cv.UNDEFINED,
     default_mode=cv.UNDEFINED,
-    quad=False,
+    mode=TYPE_SINGLE,
 ):
     """Create a schema for an SPI device.
     :param cs_pin_required: If true, make the CS_PIN required in the config.
     :param default_data_rate: Optional data_rate to use as default
     :param default_mode Optional. The default SPI mode to use.
-    :param quad If set, will require an SPI component configured as quad data bits.
+    :param mode Choose single, quad or octal mode.
     :return: The SPI device schema, `extend` this in your config schema.
     """
     schema = {
-        cv.GenerateID(CONF_SPI_ID): cv.use_id(
-            QuadSPIComponent if quad else SPIComponent
-        ),
+        cv.GenerateID(CONF_SPI_ID): cv.use_id(TYPE_CLASS[mode]),
         cv.Optional(CONF_DATA_RATE, default=default_data_rate): SPI_DATA_RATE_SCHEMA,
         cv.Optional(CONF_SPI_MODE, default=default_mode): cv.enum(
             SPI_MODE_OPTIONS, upper=True

esphome/components/spi/spi.h

@@ -369,6 +369,7 @@ class SPIComponent : public Component {
 };
 
 using QuadSPIComponent = SPIComponent;
+using OctalSPIComponent = SPIComponent;
 /**
  * Base class for SPIDevice, un-templated.
  */

esphome/components/spi/spi_esp_idf.cpp

@@ -211,11 +211,19 @@ class SPIBusHw : public SPIBus {
       buscfg.data1_io_num = data_pins[1];
       buscfg.data2_io_num = data_pins[2];
       buscfg.data3_io_num = data_pins[3];
-      buscfg.data4_io_num = -1;
-      buscfg.data5_io_num = -1;
-      buscfg.data6_io_num = -1;
-      buscfg.data7_io_num = -1;
-      buscfg.flags |= SPICOMMON_BUSFLAG_QUAD;
+      if (data_pins.size() == 8) {
+        buscfg.data4_io_num = data_pins[4];
+        buscfg.data5_io_num = data_pins[5];
+        buscfg.data6_io_num = data_pins[6];
+        buscfg.data7_io_num = data_pins[7];
+        buscfg.flags |= SPICOMMON_BUSFLAG_OCTAL;
+      } else {
+        buscfg.data4_io_num = -1;
+        buscfg.data5_io_num = -1;
+        buscfg.data6_io_num = -1;
+        buscfg.data7_io_num = -1;
+        buscfg.flags |= SPICOMMON_BUSFLAG_QUAD;
+      }
     }
     buscfg.max_transfer_sz = MAX_TRANSFER_SIZE;
     auto err = spi_bus_initialize(channel, &buscfg, SPI_DMA_CH_AUTO);

esphome/components/sprinkler/__init__.py

@@ -1,9 +1,8 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import automation
 from esphome.automation import maybe_simple_id
-from esphome.components import number
-from esphome.components import switch
+import esphome.codegen as cg
+from esphome.components import number, switch
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_ENTITY_CATEGORY,
     CONF_ID,
@@ -14,12 +13,12 @@ from esphome.const import (
     CONF_REPEAT,
     CONF_RESTORE_VALUE,
     CONF_RUN_DURATION,
+    CONF_SET_ACTION,
     CONF_STEP,
     CONF_UNIT_OF_MEASUREMENT,
     ENTITY_CATEGORY_CONFIG,
     UNIT_MINUTE,
     UNIT_SECOND,
-    CONF_SET_ACTION,
 )
 
 AUTO_LOAD = ["number", "switch"]

esphome/components/sps30/sensor.py

@@ -1,30 +1,30 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
-from esphome.components import i2c, sensor, sensirion_common
 from esphome import automation
 from esphome.automation import maybe_simple_id
+import esphome.codegen as cg
+from esphome.components import i2c, sensirion_common, sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_ID,
     CONF_PM_1_0,
     CONF_PM_2_5,
     CONF_PM_4_0,
     CONF_PM_10_0,
+    CONF_PM_SIZE,
     CONF_PMC_0_5,
     CONF_PMC_1_0,
     CONF_PMC_2_5,
     CONF_PMC_4_0,
     CONF_PMC_10_0,
-    CONF_PM_SIZE,
     DEVICE_CLASS_PM1,
     DEVICE_CLASS_PM10,
     DEVICE_CLASS_PM25,
-    STATE_CLASS_MEASUREMENT,
-    UNIT_MICROGRAMS_PER_CUBIC_METER,
-    UNIT_COUNTS_PER_CUBIC_CENTIMETER,
-    UNIT_MICROMETER,
     ICON_CHEMICAL_WEAPON,
     ICON_COUNTER,
     ICON_RULER,
+    STATE_CLASS_MEASUREMENT,
+    UNIT_COUNTS_PER_CUBIC_CENTIMETER,
+    UNIT_MICROGRAMS_PER_CUBIC_METER,
+    UNIT_MICROMETER,
 )
 
 CODEOWNERS = ["@martgras"]

esphome/components/ssd1306_i2c/display.py

@@ -1,7 +1,7 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
-from esphome.components import ssd1306_base, i2c
+from esphome.components import i2c, ssd1306_base
 from esphome.components.ssd1306_base import _validate
+import esphome.config_validation as cv
 from esphome.const import CONF_ID, CONF_LAMBDA, CONF_PAGES
 
 AUTO_LOAD = ["ssd1306_base"]

esphome/components/ssd1322_base/__init__.py

@@ -1,7 +1,7 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import pins
+import esphome.codegen as cg
 from esphome.components import display
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_BRIGHTNESS,
     CONF_EXTERNAL_VCC,

esphome/components/ssd1325_base/__init__.py

@@ -1,7 +1,7 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import pins
+import esphome.codegen as cg
 from esphome.components import display
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_BRIGHTNESS,
     CONF_EXTERNAL_VCC,

esphome/components/ssd1327_base/__init__.py

@@ -1,7 +1,7 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import pins
+import esphome.codegen as cg
 from esphome.components import display
+import esphome.config_validation as cv
 from esphome.const import CONF_BRIGHTNESS, CONF_LAMBDA, CONF_MODEL, CONF_RESET_PIN
 
 CODEOWNERS = ["@kbx81"]

esphome/components/ssd1327_i2c/display.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
+from esphome.components import i2c, ssd1327_base
 import esphome.config_validation as cv
-from esphome.components import ssd1327_base, i2c
 from esphome.const import CONF_ID, CONF_LAMBDA, CONF_PAGES
 
 CODEOWNERS = ["@kbx81"]

esphome/components/ssd1331_base/__init__.py

@@ -1,7 +1,7 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import pins
+import esphome.codegen as cg
 from esphome.components import display
+import esphome.config_validation as cv
 from esphome.const import CONF_BRIGHTNESS, CONF_LAMBDA, CONF_RESET_PIN
 
 CODEOWNERS = ["@kbx81"]

esphome/components/ssd1351_base/__init__.py

@@ -1,7 +1,7 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import pins
+import esphome.codegen as cg
 from esphome.components import display
+import esphome.config_validation as cv
 from esphome.const import CONF_BRIGHTNESS, CONF_LAMBDA, CONF_MODEL, CONF_RESET_PIN
 
 CODEOWNERS = ["@kbx81"]

esphome/components/st7567_base/__init__.py

@@ -1,14 +1,14 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import pins
+import esphome.codegen as cg
 from esphome.components import display
+import esphome.config_validation as cv
 from esphome.const import (
+    CONF_INVERT_COLORS,
     CONF_LAMBDA,
-    CONF_RESET_PIN,
     CONF_MIRROR_X,
     CONF_MIRROR_Y,
+    CONF_RESET_PIN,
     CONF_TRANSFORM,
-    CONF_INVERT_COLORS,
 )
 
 CODEOWNERS = ["@latonita"]

esphome/components/st7567_i2c/display.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
+from esphome.components import i2c, st7567_base
 import esphome.config_validation as cv
-from esphome.components import st7567_base, i2c
 from esphome.const import CONF_ID, CONF_LAMBDA, CONF_PAGES
 
 CODEOWNERS = ["@latonita"]

esphome/components/st7920/display.py

@@ -1,7 +1,7 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import display, spi
-from esphome.const import CONF_ID, CONF_LAMBDA, CONF_WIDTH, CONF_HEIGHT
+import esphome.config_validation as cv
+from esphome.const import CONF_HEIGHT, CONF_ID, CONF_LAMBDA, CONF_WIDTH
 
 AUTO_LOAD = ["display"]
 CODEOWNERS = ["@marsjan155"]

esphome/components/statsd/__init__.py

@@ -1,12 +1,12 @@
 import esphome.codegen as cg
+from esphome.components import binary_sensor, sensor
 import esphome.config_validation as cv
-from esphome.components import sensor, binary_sensor
 from esphome.const import (
+    CONF_BINARY_SENSORS,
     CONF_ID,
-    CONF_PORT,
     CONF_NAME,
+    CONF_PORT,
     CONF_SENSORS,
-    CONF_BINARY_SENSORS,
 )
 
 AUTO_LOAD = ["socket"]

esphome/components/status/binary_sensor.py

@@ -1,10 +1,7 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import binary_sensor
-from esphome.const import (
-    DEVICE_CLASS_CONNECTIVITY,
-    ENTITY_CATEGORY_DIAGNOSTIC,
-)
+import esphome.config_validation as cv
+from esphome.const import DEVICE_CLASS_CONNECTIVITY, ENTITY_CATEGORY_DIAGNOSTIC
 
 DEPENDENCIES = ["network"]
 

esphome/components/status_led/__init__.py

@@ -1,6 +1,6 @@
 from esphome import pins
-import esphome.config_validation as cv
 import esphome.codegen as cg
+import esphome.config_validation as cv
 from esphome.const import CONF_ID, CONF_PIN
 from esphome.core import coroutine_with_priority
 

esphome/components/status_led/light/__init__.py

@@ -1,8 +1,9 @@
 from esphome import pins
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import light, output
+import esphome.config_validation as cv
 from esphome.const import CONF_OUTPUT, CONF_OUTPUT_ID, CONF_PIN
+
 from .. import status_led_ns
 
 AUTO_LOAD = ["output"]

esphome/components/stepper/__init__.py

@@ -1,14 +1,14 @@
+from esphome import automation
 import esphome.codegen as cg
 import esphome.config_validation as cv
-from esphome import automation
 from esphome.const import (
     CONF_ACCELERATION,
     CONF_DECELERATION,
     CONF_ID,
     CONF_MAX_SPEED,
     CONF_POSITION,
-    CONF_TARGET,
     CONF_SPEED,
+    CONF_TARGET,
 )
 from esphome.core import CORE, coroutine_with_priority
 

esphome/components/sts3x/sensor.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import i2c, sensor
+import esphome.config_validation as cv
 from esphome.const import (
     DEVICE_CLASS_TEMPERATURE,
     STATE_CLASS_MEASUREMENT,

esphome/components/substitutions/__init__.py

@@ -1,10 +1,10 @@
 import logging
 
-import esphome.config_validation as cv
 from esphome import core
+from esphome.config_helpers import Extend, Remove, merge_config
+import esphome.config_validation as cv
 from esphome.const import CONF_SUBSTITUTIONS, VALID_SUBSTITUTIONS_CHARACTERS
 from esphome.yaml_util import ESPHomeDataBase, make_data_base
-from esphome.config_helpers import merge_config, Extend, Remove
 
 CODEOWNERS = ["@esphome/core"]
 _LOGGER = logging.getLogger(__name__)

esphome/components/sun/__init__.py

@@ -1,15 +1,15 @@
 import re
 
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import automation
+import esphome.codegen as cg
 from esphome.components import time
+import esphome.config_validation as cv
 from esphome.const import (
-    CONF_TIME_ID,
     CONF_ID,
-    CONF_TRIGGER_ID,
     CONF_LATITUDE,
     CONF_LONGITUDE,
+    CONF_TIME_ID,
+    CONF_TRIGGER_ID,
 )
 
 CODEOWNERS = ["@OttoWinter"]

esphome/components/sun/sensor/__init__.py

@@ -1,12 +1,9 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import sensor
-from esphome.const import (
-    UNIT_DEGREES,
-    ICON_WEATHER_SUNSET,
-    CONF_TYPE,
-)
-from .. import sun_ns, CONF_SUN_ID, Sun
+import esphome.config_validation as cv
+from esphome.const import CONF_TYPE, ICON_WEATHER_SUNSET, UNIT_DEGREES
+
+from .. import CONF_SUN_ID, Sun, sun_ns
 
 DEPENDENCIES = ["sun"]
 

esphome/components/sun/text_sensor/__init__.py

@@ -1,14 +1,15 @@
+import esphome.codegen as cg
 from esphome.components import text_sensor
 import esphome.config_validation as cv
-import esphome.codegen as cg
 from esphome.const import (
+    CONF_FORMAT,
     CONF_ICON,
+    CONF_TYPE,
     ICON_WEATHER_SUNSET_DOWN,
     ICON_WEATHER_SUNSET_UP,
-    CONF_TYPE,
-    CONF_FORMAT,
 )
-from .. import sun_ns, CONF_SUN_ID, Sun, CONF_ELEVATION, elevation, DEFAULT_ELEVATION
+
+from .. import CONF_ELEVATION, CONF_SUN_ID, DEFAULT_ELEVATION, Sun, elevation, sun_ns
 
 DEPENDENCIES = ["sun"]
 

esphome/components/sun_gtil2/__init__.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import uart
+import esphome.config_validation as cv
 from esphome.const import CONF_ID
 
 CODEOWNERS = ["@Mat931"]

esphome/components/sun_gtil2/sensor.py

@@ -1,18 +1,19 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import sensor
+import esphome.config_validation as cv
 from esphome.const import (
-    DEVICE_CLASS_VOLTAGE,
+    CONF_TEMPERATURE,
     DEVICE_CLASS_POWER,
     DEVICE_CLASS_TEMPERATURE,
+    DEVICE_CLASS_VOLTAGE,
     ICON_FLASH,
-    UNIT_VOLT,
     ICON_THERMOMETER,
-    UNIT_WATT,
     UNIT_CELSIUS,
-    CONF_TEMPERATURE,
+    UNIT_VOLT,
+    UNIT_WATT,
 )
-from . import SunGTIL2Component, CONF_SUN_GTIL2_ID
+
+from . import CONF_SUN_GTIL2_ID, SunGTIL2Component
 
 CONF_AC_VOLTAGE = "ac_voltage"
 CONF_DC_VOLTAGE = "dc_voltage"

esphome/components/sun_gtil2/text_sensor.py

@@ -1,8 +1,9 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import text_sensor
+import esphome.config_validation as cv
 from esphome.const import CONF_STATE
-from . import SunGTIL2Component, CONF_SUN_GTIL2_ID
+
+from . import CONF_SUN_GTIL2_ID, SunGTIL2Component
 
 CONF_SERIAL_NUMBER = "serial_number"
 

esphome/components/sx1509/__init__.py

@@ -1,17 +1,17 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import pins
+import esphome.codegen as cg
 from esphome.components import i2c
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_ID,
     CONF_INPUT,
-    CONF_NUMBER,
-    CONF_MODE,
     CONF_INVERTED,
+    CONF_MODE,
+    CONF_NUMBER,
+    CONF_OPEN_DRAIN,
     CONF_OUTPUT,
     CONF_PULLDOWN,
     CONF_PULLUP,
-    CONF_OPEN_DRAIN,
 )
 
 CONF_KEYPAD = "keypad"

esphome/components/sx1509/binary_sensor/__init__.py

@@ -1,9 +1,9 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import binary_sensor
-from esphome.const import CONF_ROW, CONF_COL
+import esphome.config_validation as cv
+from esphome.const import CONF_COL, CONF_ROW
 
-from .. import SX1509Component, sx1509_ns, CONF_SX1509_ID
+from .. import CONF_SX1509_ID, SX1509Component, sx1509_ns
 
 DEPENDENCIES = ["sx1509"]
 

esphome/components/sx1509/output/__init__.py

@@ -1,8 +1,9 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import output
-from esphome.const import CONF_PIN, CONF_ID
-from .. import SX1509Component, sx1509_ns, CONF_SX1509_ID
+import esphome.config_validation as cv
+from esphome.const import CONF_ID, CONF_PIN
+
+from .. import CONF_SX1509_ID, SX1509Component, sx1509_ns
 
 DEPENDENCIES = ["sx1509"]