esphome 2025.3.3__py3-none-any.whl → 2025.4.0__py3-none-any.whl

esphome/components/psram/psram.cpp

@@ -1,25 +1,36 @@
-#include "psram.h"
 
 #ifdef USE_ESP32
+#include "psram.h"
+#ifdef USE_ESP_IDF
+#include <esp_psram.h>
+#endif  // USE_ESP_IDF
 
 #include "esphome/core/log.h"
 
 #include <esp_heap_caps.h>
-#include <esp_idf_version.h>
 
 namespace esphome {
 namespace psram {
-
 static const char *const TAG = "psram";
 
 void PsramComponent::dump_config() {
+  ESP_LOGCONFIG(TAG, "PSRAM:");
+#ifdef USE_ESP_IDF
+  bool available = esp_psram_is_initialized();
+
+  ESP_LOGCONFIG(TAG, "  Available: %s", YESNO(available));
+  if (available) {
+    ESP_LOGCONFIG(TAG, "  Size: %zu KB", esp_psram_get_size() / 1024);
+#if CONFIG_SPIRAM_ECC_ENABLE
+    ESP_LOGCONFIG(TAG, "  ECC enabled: YES");
+#endif
+  }
+#else
   // Technically this can be false if the PSRAM is full, but heap_caps_get_total_size() isn't always available, and it's
   // very unlikely for the PSRAM to be full.
   bool available = heap_caps_get_free_size(MALLOC_CAP_SPIRAM) > 0;
-
-  ESP_LOGCONFIG(TAG, "PSRAM:");
   ESP_LOGCONFIG(TAG, "  Available: %s", YESNO(available));
-#if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(4, 1, 0)
+
   if (available) {
     const size_t psram_total_size_bytes = heap_caps_get_total_size(MALLOC_CAP_SPIRAM);
     const float psram_total_size_kb = psram_total_size_bytes / 1024.0f;
@@ -30,7 +41,7 @@ void PsramComponent::dump_config() {
       ESP_LOGCONFIG(TAG, "  Size: %zu bytes", psram_total_size_bytes);
     }
   }
-#endif
+#endif  // USE_ESP_IDF
 }
 
 }  // namespace psram

esphome/components/pulse_counter/sensor.py

@@ -1,22 +1,22 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import automation, pins
+import esphome.codegen as cg
 from esphome.components import sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_COUNT_MODE,
     CONF_FALLING_EDGE,
     CONF_ID,
     CONF_INTERNAL_FILTER,
+    CONF_NUMBER,
     CONF_PIN,
     CONF_RISING_EDGE,
-    CONF_NUMBER,
     CONF_TOTAL,
     CONF_VALUE,
     ICON_PULSE,
     STATE_CLASS_MEASUREMENT,
     STATE_CLASS_TOTAL_INCREASING,
-    UNIT_PULSES_PER_MINUTE,
     UNIT_PULSES,
+    UNIT_PULSES_PER_MINUTE,
 )
 from esphome.core import CORE
 

esphome/components/pulse_meter/sensor.py

@@ -1,13 +1,13 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import automation, pins
+import esphome.codegen as cg
 from esphome.components import sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_ID,
     CONF_INTERNAL_FILTER,
     CONF_INTERNAL_FILTER_MODE,
-    CONF_PIN,
     CONF_NUMBER,
+    CONF_PIN,
     CONF_TIMEOUT,
     CONF_TOTAL,
     CONF_VALUE,

esphome/components/pulse_width/sensor.py

@@ -1,13 +1,8 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import pins
+import esphome.codegen as cg
 from esphome.components import sensor
-from esphome.const import (
-    CONF_PIN,
-    STATE_CLASS_MEASUREMENT,
-    UNIT_SECOND,
-    ICON_TIMER,
-)
+import esphome.config_validation as cv
+from esphome.const import CONF_PIN, ICON_TIMER, STATE_CLASS_MEASUREMENT, UNIT_SECOND
 
 pulse_width_ns = cg.esphome_ns.namespace("pulse_width")
 

esphome/components/pvvx_mithermometer/display/__init__.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import ble_client, display, time
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_AUTO_CLEAR_ENABLED,
     CONF_DISCONNECT_DELAY,

esphome/components/pvvx_mithermometer/sensor.py

@@ -1,14 +1,14 @@
 import esphome.codegen as cg
+from esphome.components import esp32_ble_tracker, sensor
 import esphome.config_validation as cv
-from esphome.components import sensor, esp32_ble_tracker
 from esphome.const import (
     CONF_BATTERY_LEVEL,
     CONF_BATTERY_VOLTAGE,
-    CONF_MAC_ADDRESS,
     CONF_HUMIDITY,
+    CONF_ID,
+    CONF_MAC_ADDRESS,
     CONF_SIGNAL_STRENGTH,
     CONF_TEMPERATURE,
-    CONF_ID,
     DEVICE_CLASS_BATTERY,
     DEVICE_CLASS_HUMIDITY,
     DEVICE_CLASS_SIGNAL_STRENGTH,

esphome/components/pylontech/__init__.py

@@ -1,4 +1,5 @@
 import logging
+
 import esphome.codegen as cg
 from esphome.components import uart
 import esphome.config_validation as cv

esphome/components/pylontech/sensor/__init__.py

@@ -1,27 +1,22 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import sensor
+import esphome.config_validation as cv
 from esphome.const import (
-    CONF_VOLTAGE,
     CONF_CURRENT,
+    CONF_ID,
     CONF_TEMPERATURE,
-    UNIT_VOLT,
-    UNIT_AMPERE,
-    DEVICE_CLASS_VOLTAGE,
+    CONF_VOLTAGE,
+    DEVICE_CLASS_BATTERY,
     DEVICE_CLASS_CURRENT,
     DEVICE_CLASS_TEMPERATURE,
-    DEVICE_CLASS_BATTERY,
+    DEVICE_CLASS_VOLTAGE,
+    UNIT_AMPERE,
     UNIT_CELSIUS,
     UNIT_PERCENT,
-    CONF_ID,
+    UNIT_VOLT,
 )
 
-from .. import (
-    CONF_PYLONTECH_ID,
-    PYLONTECH_COMPONENT_SCHEMA,
-    CONF_BATTERY,
-    pylontech_ns,
-)
+from .. import CONF_BATTERY, CONF_PYLONTECH_ID, PYLONTECH_COMPONENT_SCHEMA, pylontech_ns
 
 PylontechSensor = pylontech_ns.class_("PylontechSensor", cg.Component)
 

esphome/components/pylontech/text_sensor/__init__.py

@@ -1,14 +1,9 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import text_sensor
+import esphome.config_validation as cv
 from esphome.const import CONF_ID
 
-from .. import (
-    CONF_PYLONTECH_ID,
-    PYLONTECH_COMPONENT_SCHEMA,
-    CONF_BATTERY,
-    pylontech_ns,
-)
+from .. import CONF_BATTERY, CONF_PYLONTECH_ID, PYLONTECH_COMPONENT_SCHEMA, pylontech_ns
 
 PylontechTextSensor = pylontech_ns.class_("PylontechTextSensor", cg.Component)
 

esphome/components/pzem004t/sensor.py

@@ -1,20 +1,20 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import sensor, uart
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_CURRENT,
+    CONF_ENERGY,
     CONF_ID,
     CONF_POWER,
     CONF_VOLTAGE,
-    CONF_ENERGY,
     DEVICE_CLASS_CURRENT,
     DEVICE_CLASS_ENERGY,
     DEVICE_CLASS_POWER,
     DEVICE_CLASS_VOLTAGE,
     STATE_CLASS_MEASUREMENT,
     STATE_CLASS_TOTAL_INCREASING,
-    UNIT_VOLT,
     UNIT_AMPERE,
+    UNIT_VOLT,
     UNIT_WATT,
     UNIT_WATT_HOURS,
 )

esphome/components/pzemac/sensor.py

@@ -1,27 +1,27 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import automation
 from esphome.automation import maybe_simple_id
-from esphome.components import sensor, modbus
+import esphome.codegen as cg
+from esphome.components import modbus, sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_CURRENT,
     CONF_ENERGY,
+    CONF_FREQUENCY,
     CONF_ID,
     CONF_POWER,
-    CONF_VOLTAGE,
-    CONF_FREQUENCY,
     CONF_POWER_FACTOR,
-    DEVICE_CLASS_POWER_FACTOR,
-    DEVICE_CLASS_VOLTAGE,
+    CONF_VOLTAGE,
     DEVICE_CLASS_CURRENT,
-    DEVICE_CLASS_POWER,
     DEVICE_CLASS_ENERGY,
+    DEVICE_CLASS_POWER,
+    DEVICE_CLASS_POWER_FACTOR,
+    DEVICE_CLASS_VOLTAGE,
     ICON_CURRENT_AC,
     STATE_CLASS_MEASUREMENT,
     STATE_CLASS_TOTAL_INCREASING,
+    UNIT_AMPERE,
     UNIT_HERTZ,
     UNIT_VOLT,
-    UNIT_AMPERE,
     UNIT_WATT,
     UNIT_WATT_HOURS,
 )

esphome/components/pzemdc/sensor.py

@@ -1,13 +1,13 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import automation
 from esphome.automation import maybe_simple_id
-from esphome.components import sensor, modbus
+import esphome.codegen as cg
+from esphome.components import modbus, sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_CURRENT,
+    CONF_ENERGY,
     CONF_ID,
     CONF_POWER,
-    CONF_ENERGY,
     CONF_VOLTAGE,
     DEVICE_CLASS_CURRENT,
     DEVICE_CLASS_ENERGY,
@@ -15,10 +15,10 @@ from esphome.const import (
     DEVICE_CLASS_VOLTAGE,
     STATE_CLASS_MEASUREMENT,
     STATE_CLASS_TOTAL_INCREASING,
-    UNIT_VOLT,
     UNIT_AMPERE,
-    UNIT_WATT,
     UNIT_KILOWATT_HOURS,
+    UNIT_VOLT,
+    UNIT_WATT,
 )
 
 AUTO_LOAD = ["modbus"]

esphome/components/qmc5883l/sensor.py

@@ -1,24 +1,24 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import i2c, sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_ADDRESS,
     CONF_FIELD_STRENGTH_X,
     CONF_FIELD_STRENGTH_Y,
     CONF_FIELD_STRENGTH_Z,
     CONF_HEADING,
-    CONF_TEMPERATURE,
     CONF_ID,
     CONF_OVERSAMPLING,
     CONF_RANGE,
+    CONF_TEMPERATURE,
+    CONF_UPDATE_INTERVAL,
     DEVICE_CLASS_TEMPERATURE,
     ICON_MAGNET,
+    ICON_SCREEN_ROTATION,
     STATE_CLASS_MEASUREMENT,
-    UNIT_MICROTESLA,
     UNIT_CELSIUS,
     UNIT_DEGREES,
-    ICON_SCREEN_ROTATION,
-    CONF_UPDATE_INTERVAL,
+    UNIT_MICROTESLA,
 )
 
 DEPENDENCIES = ["i2c"]

esphome/components/qmp6988/sensor.py

@@ -1,8 +1,10 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import i2c, sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_ID,
+    CONF_IIR_FILTER,
+    CONF_OVERSAMPLING,
     CONF_PRESSURE,
     CONF_TEMPERATURE,
     DEVICE_CLASS_PRESSURE,
@@ -10,8 +12,6 @@ from esphome.const import (
     STATE_CLASS_MEASUREMENT,
     UNIT_CELSIUS,
     UNIT_HECTOPASCAL,
-    CONF_IIR_FILTER,
-    CONF_OVERSAMPLING,
 )
 
 DEPENDENCIES = ["i2c"]

esphome/components/qr_code/__init__.py

@@ -1,5 +1,5 @@
-import esphome.config_validation as cv
 import esphome.codegen as cg
+import esphome.config_validation as cv
 from esphome.const import CONF_ID, CONF_VALUE
 
 CONF_SCALE = "scale"

esphome/components/qspi_dbi/display.py

@@ -113,7 +113,7 @@ BASE_SCHEMA = display.FULL_DISPLAY_SCHEMA.extend(
             cs_pin_required=False,
             default_mode="MODE0",
             default_data_rate=10e6,
-            quad=True,
+            mode=spi.TYPE_QUAD,
         )
     )
 )

esphome/components/qspi_dbi/qspi_dbi.cpp

@@ -1,4 +1,4 @@
-#ifdef USE_ESP_IDF
+#if defined(USE_ESP_IDF) && defined(USE_ESP32_VARIANT_ESP32S3)
 #include "qspi_dbi.h"
 #include "esphome/core/log.h"
 

esphome/components/qspi_dbi/qspi_dbi.h

@@ -3,7 +3,7 @@
 //
 #pragma once
 
-#ifdef USE_ESP_IDF
+#if defined(USE_ESP_IDF) && defined(USE_ESP32_VARIANT_ESP32S3)
 #include "esphome/components/spi/spi.h"
 #include "esphome/components/display/display.h"
 #include "esphome/components/display/display_buffer.h"

esphome/components/qwiic_pir/binary_sensor.py

@@ -1,11 +1,8 @@
 from esphome import core
 import esphome.codegen as cg
+from esphome.components import binary_sensor, i2c
 import esphome.config_validation as cv
-from esphome.components import i2c, binary_sensor
-from esphome.const import (
-    CONF_DEBOUNCE,
-    DEVICE_CLASS_MOTION,
-)
+from esphome.const import CONF_DEBOUNCE, DEVICE_CLASS_MOTION
 
 DEPENDENCIES = ["i2c"]
 CODEOWNERS = ["@kahrendt"]

esphome/components/radon_eye_ble/__init__.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import esp32_ble_tracker
+import esphome.config_validation as cv
 from esphome.const import CONF_ID
 
 DEPENDENCIES = ["esp32_ble_tracker"]

esphome/components/radon_eye_rd200/sensor.py

@@ -1,14 +1,13 @@
 import esphome.codegen as cg
+from esphome.components import ble_client, sensor
 import esphome.config_validation as cv
-from esphome.components import sensor, ble_client
-
 from esphome.const import (
-    STATE_CLASS_MEASUREMENT,
-    UNIT_BECQUEREL_PER_CUBIC_METER,
     CONF_ID,
     CONF_RADON,
     CONF_RADON_LONG_TERM,
     ICON_RADIOACTIVE,
+    STATE_CLASS_MEASUREMENT,
+    UNIT_BECQUEREL_PER_CUBIC_METER,
 )
 
 DEPENDENCIES = ["ble_client"]

esphome/components/rc522/__init__.py

@@ -1,12 +1,12 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import automation, pins
+import esphome.codegen as cg
 from esphome.components import i2c
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_ON_TAG,
     CONF_ON_TAG_REMOVED,
-    CONF_TRIGGER_ID,
     CONF_RESET_PIN,
+    CONF_TRIGGER_ID,
 )
 
 CODEOWNERS = ["@glmnet"]

esphome/components/rc522_i2c/__init__.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import i2c, rc522
+import esphome.config_validation as cv
 from esphome.const import CONF_ID
 
 CODEOWNERS = ["@glmnet"]

esphome/components/rc522_spi/__init__.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
+from esphome.components import rc522, spi
 import esphome.config_validation as cv
-from esphome.components import spi, rc522
 from esphome.const import CONF_ID
 
 CODEOWNERS = ["@glmnet"]

esphome/components/rdm6300/__init__.py

@@ -1,7 +1,7 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import automation
+import esphome.codegen as cg
 from esphome.components import uart
+import esphome.config_validation as cv
 from esphome.const import CONF_ID, CONF_ON_TAG, CONF_TRIGGER_ID
 
 DEPENDENCIES = ["uart"]

esphome/components/rdm6300/binary_sensor.py

@@ -1,7 +1,8 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import binary_sensor, rdm6300
+import esphome.config_validation as cv
 from esphome.const import CONF_UID
+
 from . import rdm6300_ns
 
 DEPENDENCIES = ["rdm6300"]

esphome/components/resistance/sensor.py

@@ -1,12 +1,12 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_REFERENCE_VOLTAGE,
     CONF_SENSOR,
+    ICON_FLASH,
     STATE_CLASS_MEASUREMENT,
     UNIT_OHM,
-    ICON_FLASH,
 )
 
 resistance_ns = cg.esphome_ns.namespace("resistance")

esphome/components/restart/button/__init__.py

@@ -1,6 +1,6 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import button
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_ID,
     DEVICE_CLASS_RESTART,

esphome/components/restart/switch/__init__.py

@@ -1,10 +1,7 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import switch
-from esphome.const import (
-    ENTITY_CATEGORY_CONFIG,
-    ICON_RESTART,
-)
+import esphome.config_validation as cv
+from esphome.const import ENTITY_CATEGORY_CONFIG, ICON_RESTART
 
 restart_ns = cg.esphome_ns.namespace("restart")
 RestartSwitch = restart_ns.class_("RestartSwitch", switch.Switch, cg.Component)

esphome/components/rf_bridge/__init__.py

@@ -1,9 +1,10 @@
-import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome import automation
+import esphome.codegen as cg
 from esphome.components import uart
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_CODE,
+    CONF_DURATION,
     CONF_HIGH,
     CONF_ID,
     CONF_LENGTH,
@@ -12,7 +13,6 @@ from esphome.const import (
     CONF_RAW,
     CONF_SYNC,
     CONF_TRIGGER_ID,
-    CONF_DURATION,
 )
 
 DEPENDENCIES = ["uart"]

esphome/components/rgb/light.py

@@ -1,7 +1,7 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import light, output
-from esphome.const import CONF_BLUE, CONF_GREEN, CONF_RED, CONF_OUTPUT_ID
+import esphome.config_validation as cv
+from esphome.const import CONF_BLUE, CONF_GREEN, CONF_OUTPUT_ID, CONF_RED
 
 rgb_ns = cg.esphome_ns.namespace("rgb")
 RGBLightOutput = rgb_ns.class_("RGBLightOutput", light.LightOutput)

esphome/components/rgbct/light.py

@@ -1,14 +1,14 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import light, output
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_BLUE,
+    CONF_COLD_WHITE_COLOR_TEMPERATURE,
     CONF_COLOR_INTERLOCK,
     CONF_COLOR_TEMPERATURE,
     CONF_GREEN,
-    CONF_RED,
     CONF_OUTPUT_ID,
-    CONF_COLD_WHITE_COLOR_TEMPERATURE,
+    CONF_RED,
     CONF_WARM_WHITE_COLOR_TEMPERATURE,
 )
 

esphome/components/rgbw/light.py

@@ -1,12 +1,12 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import light, output
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_BLUE,
     CONF_COLOR_INTERLOCK,
     CONF_GREEN,
-    CONF_RED,
     CONF_OUTPUT_ID,
+    CONF_RED,
     CONF_WHITE,
 )
 

esphome/components/rgbww/light.py

@@ -1,16 +1,16 @@
 import esphome.codegen as cg
-import esphome.config_validation as cv
 from esphome.components import light, output
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_BLUE,
+    CONF_COLD_WHITE,
+    CONF_COLD_WHITE_COLOR_TEMPERATURE,
     CONF_COLOR_INTERLOCK,
     CONF_CONSTANT_BRIGHTNESS,
     CONF_GREEN,
-    CONF_RED,
     CONF_OUTPUT_ID,
-    CONF_COLD_WHITE,
+    CONF_RED,
     CONF_WARM_WHITE,
-    CONF_COLD_WHITE_COLOR_TEMPERATURE,
     CONF_WARM_WHITE_COLOR_TEMPERATURE,
 )
 

esphome/components/rotary_encoder/sensor.py

@@ -1,19 +1,19 @@
+from esphome import automation, pins
 import esphome.codegen as cg
-import esphome.config_validation as cv
-from esphome import pins, automation
 from esphome.components import sensor
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_ID,
-    CONF_RESOLUTION,
-    CONF_MIN_VALUE,
     CONF_MAX_VALUE,
-    UNIT_STEPS,
-    ICON_ROTATE_RIGHT,
-    CONF_VALUE,
+    CONF_MIN_VALUE,
     CONF_PIN_A,
     CONF_PIN_B,
-    CONF_TRIGGER_ID,
+    CONF_RESOLUTION,
     CONF_RESTORE_MODE,
+    CONF_TRIGGER_ID,
+    CONF_VALUE,
+    ICON_ROTATE_RIGHT,
+    UNIT_STEPS,
 )
 
 rotary_encoder_ns = cg.esphome_ns.namespace("rotary_encoder")

esphome/components/rp2040_pio/__init__.py

@@ -2,7 +2,6 @@ import platform
 
 import esphome.codegen as cg
 
-
 DEPENDENCIES = ["rp2040"]
 
 

esphome/components/rp2040_pio_led_strip/light.py

@@ -1,7 +1,9 @@
 from dataclasses import dataclass
 
 from esphome import pins
+import esphome.codegen as cg
 from esphome.components import light, rp2040
+import esphome.config_validation as cv
 from esphome.const import (
     CONF_CHIPSET,
     CONF_ID,
@@ -11,10 +13,6 @@ from esphome.const import (
     CONF_PIN,
     CONF_RGB_ORDER,
 )
-
-import esphome.codegen as cg
-import esphome.config_validation as cv
-
 from esphome.util import _LOGGER