cgse 2023.38.0__py3-none-any.whl → 2024.1.4__py3-none-any.whl

egse/aeu/aeu_awg.yaml

@@ -1,265 +0,0 @@
-BaseClass:
-    egse.aeu.AWGInterface
-
-ProxyClass:
-    egse.aeu.AWGProxy
-
-ControlServerClass:
-    egse.aeu.AWGControlServer
-
-ControlServer:
-    egse.aeu.aeu_cs
-
-
-#UserInterface:
-#    egse.aeu.aeu_ui
-
-Commands:
-
-
-    # Each of these groups is parsed and used on both the server and the client side.
-    #
-    # The group name (e.g. is_simulator) will be monkey patched in the Proxy class for the device
-    # or service.
-    #
-    # The other field are:
-    #   description:   Used by the doc_string method to generate a help string
-    #   cmd:           Command string that will eventually be send to the hardware controller for
-    #                  the device. This cmd string is also used at the client side to parse and
-    #                  validate the arguments.
-    #   device_method: The name of the method to be called on the device class.
-    #                  These should all be defined by the interface class for the device, i.e.
-    #                  AEUInterface in this case.
-    #                  When the device_method is the same as the group name, it can be omitted.
-    #   response:      The name of the method to be called from the device protocol.
-    #                  This method should exist in the subclass of the CommandProtocol base class,
-    #                  i.e. in this case it will be the AEUProtocol class.
-    #                  The default (when no response is given) is 'handle_device_method'.
-
-    # Definition of the the DeviceInterface
-
-    is_simulator:
-        description: Ask if the connected class is a simulator instead of the real device Controller class.
-        returns: bool | True if the far-end is a simulator instead of the real hardware
-
-    is_connected:
-        description: Check if the device hardware controller is connected.
-
-    connect:
-        description: Connect the device hardware controller.
-
-    reconnect:
-        description: Reconnect the device hardware controller.  This command will force a disconnect and then try to
-                     re-connect to the controller.
-
-    disconnect:
-        description: Disconnect from the device hardware controller. This command will be send to the Control Server
-                     which will then disconnect from the hardware controller.
-                     This command does not affect the ZeroMQ connection of the Proxy to the control server. Use the
-                     service command `disconnect_cs()` to disconnect from the control server.
-
-    # AWG commands
-
-    reset:
-        description:    Reset the instrument to the remote operation default settings.
-        cmd:            "*RST"
-
-    set_channel:
-        description:    Select the required channel (1/2) as the destination for sub-sequent commands.
-        cmd:            "CHN {}"
-
-    get_channel:
-        description:    Return the currently selected channel number (1/2).
-        cmd:            "CHN?"
-
-    set_waveform_type:
-        description:    Set the output waveform type (ARB for arbitrary, SQUARE for square).
-        cmd:            "WAVE {}"
-
-#    get_waveform_type:
-#        description:    Return the output waveform type (ARB for arbitrary, SQUARE for square).
-#        cmd:            "WAVE?"
-
-    set_output_load:
-        description:    Set the output load [Ohm], which the generator is to assume for amplitude and DC offset entries.
-        cmd:            "ZLOAD {}"
-
-#    get_output_load:
-#        description:    Return the output load.
-#        cmd:            "ZLOAD?"
-
-    set_amplitude:
-        description:    Set the amplitude to the given value [Vpp].
-        cmd:            "AMPL {}"
-
-#    get_amplitude:
-#        description:    Return the amplitude [Vpp].
-#        cmd:            "AMPL?"
-
-    set_dc_offset:
-        description:    Set the DC offset to the given value [V].
-        cmd:            "DCOFFS {}"
-
-#    get_dc_offset:
-#        description:    Returns the DC offset [V].
-#        cmd:            "DCOFFS?"
-
-    set_duty_cycle:
-        description:    Set the square waveform symmetry to the given value [%].
-        cmd:            "SQRSYMM {}"
-
-#    get_duty_cycle:
-#        description:    Return the square waveform symmetry [%].
-#        cmd:            "SQRSYMM?"
-
-    set_frequency:
-        description:    Set the waveform frequency [Hz].
-        cmd:            "FREQ {}"
-
-#    get_frequency:
-#        description:    Return the waveform frequency [Hz].
-#        cmd:            "FREQ?"
-
-    set_output_status:
-        description:    Set the output status and type (ON/OFF).
-        cmd:            "OUTPUT {}"
-
-#    get_output_status:
-#        description:    Return the output status and type (ON/OFF).
-#        cmd:            "OUTPUT?"
-
-    set_arb_waveform:
-        description:    Set the given arbitrary waveform type (ARB1/ARB2/ARB3/ARB4).
-        cmd:            "ARBLOAD {}"
-
-    get_arb_waveform:
-        description:    Return the arbitrary waveform type (ARB1/ARB2/ARB3/ARB4).
-        cmd:            "ARBLOAD?"
-
-    define_arb_waveform:
-        description:    Define an arbitrary waveform (ARB1/ARB2/ARB3/ARB5) with the given name and waveform point
-                        interpolation state (ON/OFF).
-        cmd:            "ARBDEF {}, {}, {}"
-
-    load_arb1_data:
-        description:    Load data to an existing arbitrary waveform memory location ARB1.
-        cmd:            "ARB1 {}"
-
-    load_arb2_data:
-        description:    Load data to an existing arbitrary waveform memory location ARB2.
-        cmd:            "ARB2 {}"
-
-    load_arb3_data:
-        description:    Load data to an existing arbitrary waveform memory location ARB3.
-        cmd:            "ARB3 {}"
-
-    load_arb4_data:
-        description:    Load data to an existing arbitrary waveform memory location ARB4.
-        cmd:            "ARB4 {}"
-
-    load_arb1_ascii:
-        description:    Load data to an existing arbitrary waveform memory location ARB1.
-        cmd:            "ARB1 {}"
-
-    load_arb2_ascii:
-        description: Load data to an existing arbitrary waveform memory location ARB2.
-        cmd: "ARB2 {}"
-
-    load_arb3_ascii:
-        description: Load data to an existing arbitrary waveform memory location ARB3.
-        cmd: "ARB3 {}"
-
-    load_arb4_ascii:
-        description: Load data to an existing arbitrary waveform memory location ARB4.
-        cmd: "ARB4 {}"
-
-    get_arb1_def:
-        description:    Return the user-specified waveform name, waveform point interpolation state, and waveform length
-                        of ARB1.
-        cmd:            "ARBDEF1?"
-
-    get_arb2_def:
-        description:    Return the user-specified waveform name, waveform point interpolation state, and waveform length
-                        of ARB2.
-        cmd:            "ARBDEF2?"
-
-    get_arb3_def:
-        description:    Return the user-specified waveform name, waveform point interpolation state, and waveform length
-                        of ARB3.
-        cmd:            "ARBDEF3?"
-
-    get_arb4_def:
-        description:    Return the user-specified waveform name, waveform point interpolation state, and waveform length
-                        of ARB4.
-        cmd:            "ARBDEF4?"
-
-    get_arb1:
-        description:    Return The data for the existing waveform location ARB1.
-        cmd:            "ARB1?"
-
-    get_arb2:
-        description:    Return The data for the existing waveform location ARB2.
-        cmd:            "ARB2?"
-
-    get_arb3:
-        description:    Return The data for the existing waveform location ARB3.
-        cmd:            "ARB3?"
-
-    get_arb4:
-        description:    Return The data for the existing waveform location ARB4.
-        cmd:            "ARB4?"
-
-    clear_status:
-        description:    Clear the status structure.  This indirectly clear the status byte register.
-        cmd:            "*CLS"
-
-    execution_error_register:
-        description:    Query and clear the execution error register.  This register contains a number representing the
-                        last error encountered over the current interface.
-        cmd:            "EER?"
-
-    query_error_register:
-        description:    Query and clear the query error register.
-        cmd:            "QER?"
-
-    get_id:
-        description:    Retun the instrument identification, i.e. manufacturer, model, serial number, revision of the
-                        main firmware (XX.xx), revision of the remote interface firmware (YY.yy), and revision of the
-                        USB flash drive interface (ZZ.zz).
-        cmd:            "*IDN?"
-
-    set_counter_status:
-        description:    Set the external counter to ON or OFF.
-        cmd:            "CNTRSWT {}"
-
-    get_counter_status:
-        description:    Return the external counter status (ON/OFF).
-        cmd:            "CNTRSWT?"
-
-    set_counter_source:
-        description:    Set the counter source to AC (Alternating Current) or DC (Direct Current) coupled input.
-        cmd:            "CNTRCPLNG {}"
-
-    get_counter_source:
-        description:    Return the counter source coupled input (AC for Alternating Current, DC for Direct Current).
-        cmd:            "CNTRCPLNG?"
-
-    set_counter_type:
-        description:    Set the counter type (FREQUENCY/PERIOD/WIDTH/NWIDTH/DUTY).
-        cmd:            "CNTRTYPE {}"
-
-    get_counter_type:
-        description:    Return the counter type (FREQUENCY/PERIOD/WIDTH/NWIDTH/DUTY).
-        cmd:            "CNTRTYPE?"
-
-    get_counter_value:
-        description:    Return the currently measured count value.  If the counter type is FREQUENCY, the returned
-                        value is expressed in Hz.  If the couter type is DUTY (duty cycle), the returned value is
-                        expressed in %.  Else the returned value is expressed in s.
-        cmd:            "CNTRVAL?"
-
-    align:
-        description:    Send signal to  align the zero phase reference of both channels. This shall be used to
-                        synchronise Clk_ccdread with Clk_heater.  To synchronise both channels, the frequency should
-                        be the same.
-        cmd:            "ALIGN"

egse/aeu/aeu_crio.yaml

@@ -1,273 +0,0 @@
-BaseClass:
-    egse.aeu.CRIOInterface
-
-ProxyClass:
-    egse.aeu.CRIOProxy
-
-ControlServerClass:
-    egse.aeu.CRIOControlServer
-
-ControlServer:
-    egse.aeu.aeu_cs
-
-UserInterface:
-    egse.aeu.aeu_ui
-
-Commands:
-
-    # Each of these groups is parsed and used on both the server and the client side.
-    #
-    # The group name (e.g. is_simulator) will be monkey patched in the Proxy class for the device
-    # or service.
-    #
-    # The other field are:
-    #   description:   Used by the doc_string method to generate a help string
-    #   cmd:           Command string that will eventually be send to the hardware controller for
-    #                  the device. This cmd string is also used at the client side to parse and
-    #                  validate the arguments.
-    #   device_method: The name of the method to be called on the device class.
-    #                  These should all be defined by the interface class for the device, i.e.
-    #                  AEUInterface in this case.
-    #                  When the device_method is the same as the group name, it can be omitted.
-    #   response:      The name of the method to be called from the device protocol.
-    #                  This method should exist in the subclass of the CommandProtocol base class,
-    #                  i.e. in this case it will be the AEUProtocol class.
-    #                  The default (when no response is given) is 'handle_device_method'.
-
-    # Definition of the the DeviceInterface
-
-    is_simulator:
-        description: Ask if the connected class is a simulator instead of the real device Controller class.
-        returns: bool | True if the far-end is a simulator instead of the real hardware
-
-    is_connected:
-        description: Check if the device hardware controller is connected.
-
-    connect:
-        description: Connect the device hardware controller.
-
-    reconnect:
-        description: Reconnect the device hardware controller.  This command will force a disconnect and then try to
-                     re-connect to the controller.
-
-    disconnect:
-        description: Disconnect from the device hardware controller. This command will be send to the Control Server
-                     which will then disconnect from the hardware controller.
-                     This command does not affect the ZeroMQ connection of the Proxy to the control server. Use the
-                     service command `disconnect_cs()` to disconnect from the control server.
-
-    # cRIO commands
-
-    get_id:
-        description:    Return the instrument identification, i.e. manufacturer, model, serial number, and build version.
-        cmd:            "*IDN?"
-
-    reset:
-        description:    Reset the settings.  This command will configure
-                            - self-test with loop-back;
-                            - quality of frequency signals to "value inside of range";
-                            - set the stand-by mode;
-                            - protection sofware values (OCP, OVP, and UVP for N- and F-CAM).
-        cmd:            "*RST"
-
-    clear_error_queue:
-        description:    Clear the error queue.
-        cmd:            "*CLS"
-
-    get_n_cam_current:
-        description:    Return the measured current values for the N-CAM [A].
-        cmd:            "MEAS:N:CURR?"
-
-    get_f_cam_current:
-        description:    Return the measured current values for the F-CAM [A].
-        cmd:            "MEAS:F:CURR?"
-
-    get_n_cam_voltage:
-        description:    Return the measured voltage values for the N-CAM [V].
-        cmd:            "MEAS:N:VOLT?"
-
-    get_f_cam_voltage:
-        description:    Return the measured voltage values for the F-CAM [V].
-        cmd:            "MEAS:F:VOLT?"
-
-    set_loopback_option:
-        description:    Control the self-test operation.
-        cmd:            "CNTRL:LOOPBACK {}"
-
-    get_loopback_option:
-        description:    Return the option selected to self-test.
-        cmd:            "CNTRL:LOOPBACK?"
-
-    set_n_cam_secondary_power_status:
-        description:    Configure the secondary power lines of the N-CAM to ON/OFF.
-        cmd:            "CNTRL:N:OUTP {}"
-
-    get_n_cam_secondary_power_status:
-        description:    Return the status of the secondary power lines for the N-CAM.
-        cmd:            "CNTRL:N:OUTP?"
-
-    set_f_cam_secondary_power_status:
-        description:    Configure the secondary power lines of the F-CAM to ON/OFF.
-        cmd:            "CNTRL:F:OUTP {}"
-
-    get_f_cam_secondary_power_status:
-        description:    Return the status of the secondary power lines for the N-CAM.
-        cmd:            "CNTRL:F:OUTP?"
-
-    set_n_cam_ocp:
-        description:    Set the Over-Current Protection (OCP) values for the N-CAM [A].
-        cmd:            "CNTRL:N:CURR:PROT {}, {}, {}, {}, {}, {}"
-
-    get_n_cam_ocp:
-        description:    Return the Over-Current Protection (OCP) values for the N-CAM [A].
-        cmd:            "CNTRL:N:CURR:PROT?"
-
-    set_f_cam_ocp:
-        description:    Set the Over-Current Protection (OCP) values for the F-CAM [A].
-        cmd:            "CNTRL:F:CURR:PROT {}, {}, {}, {}, {}, {}"
-
-    get_f_cam_ocp:
-        description:    Return the Over-Current Protection (OCP) values for the F-CAM [A].
-        cmd:            "CNTRL:F:CURR:PROT?"
-
-    set_n_cam_ovp:
-        description:    Set the Over-Voltage Protection (OVP) values for the N-CAM [V].
-        cmd:            "CNTRL:N:VOLT:PROT:OV {}, {}, {}, {}, {}, {}"
-
-    get_n_cam_ovp:
-        description:    Return the Over-Voltage Protection (OVP) values for the N-CAM [V].
-        cmd:            "CNTRL:N:VOLT:PROT:OV?"
-
-    set_n_cam_uvp:
-        description:    Set the Under-Voltage Protection (UVP) values for the N-CAM [V].
-        cmd:            "CNTRL:N:VOLT:PROT:UV {}, {}, {}, {}, {}, {}"
-
-    get_n_cam_uvp:
-        description:    Return the Under-Voltage Protection (UVP) values for the N-CAM [V].
-        cmd:            "CNTRL:N:VOLT:PROT:UV?"
-
-    set_f_cam_ovp:
-        description:    Set the Over-Voltage Protection (OVP) values for the F-CAM [V].
-        cmd:            "CNTRL:F:VOLT:PROT:OV {}, {}, {}, {}, {}, {}"
-
-    get_f_cam_ovp:
-        description:    Return the Over-Voltage Protection (OVP) values for the F-CAM [V].
-        cmd:            "CNTRL:F:VOLT:PROT:OV?"
-
-    set_f_cam_uvp:
-        description:    Set the Under-Voltage Protection (UVP) values for the F-CAM [V].
-        cmd:            "CNTRL:F:VOLT:PROT:UV {}, {}, {}, {}, {}, {}"
-
-    get_f_cam_uvp:
-        description:    Return the Under-Voltage Protection (UVP) values for the F-CAM [V].
-        cmd:            "CNTRL:F:VOLT:PROT:UV?"
-
-    get_n_cam_voltage_quality:
-        description:    Return the secondary power line voltage information out-of-range for the N-CAM.
-        cmd:            "MEAS:N:VOLT:QUAL?"
-
-    get_f_cam_voltage_quality:
-        description:    Return the secondary power line voltage information out-of-range for the F-CAM.
-        cmd:            "MEAS:F:VOLT:QUAL?"
-
-    get_n_cam_current_quality:
-        description:    Return the secondary power line current information out-of-range for the N-CAM.
-        cmd:            "MEAS:N:CURR:QUAL?"
-
-    get_f_cam_current_quality:
-        description:    Return the secondary power line current information out-of-range for the F-CAM.
-        cmd:            "MEAS:F:CURR:QUAL?"
-
-    set_n_cam_clock_status:
-        description:    Enable/disable the clocks for the N-CAM (Clk_50MHz and Clk_ccdread).
-        cmd:            "CNTRL:N:CLOCK {}, {}"
-
-    get_n_cam_clock_status:
-        description:    Return whether the clock is enabled/disabled for the N-CAM (Clk_50MHz and Clk_ccdread).
-        cmd:            "CNTRL:N:CLOCK?"
-
-    get_n_cam_clock_quality:
-        description:    Returns the status of the synchronisation generator for the F-CAM (Clk_50MHz and Clk_ccdread).
-        cmd:            "MEAS:N:CLOCK:QUAL?"
-
-    set_f_cam_clock_status:
-        description:    Enable/disable the clocks for the F-CAM (Clk_50MHz_nom, Clk_50MHz_red, Clk_ccdread_nom, and
-                        Clk_ccdread_red).
-        cmd:            "CNTRL:F:CLOCK {}, {}, {}, {}"
-
-    get_f_cam_clock_status:
-        description:    Return whether the clock is enabled/disabled for the F-CAM (Clk_50MHz_nom, Clk_50MHz_red,
-                        Clk_ccdread_nom, and Clk_ccdread_red).
-        cmd:            "CNTRL:F:CLOCK?"
-
-    get_f_cam_clock_quality:
-        description:    Returns the status of the synchronisation generator for the F-CAM (Clk_50MHz_nom, Clk_50MHz_red,
-                        Clk_ccdread_nom, and Clk_ccdread_red).
-        cmd:            "MEAS:F:CLOCK:QUAL?"
-
-    set_svm_clock_status:
-        description:    Enable/disable the clocks for the SVM CAM TCS(Clk_50MHz_nom, Clk_50MHz_red, Clk_heater_nom, and
-                        Clk_heater_red).
-        cmd:            "CNTRL:SVM:CLOCK {}, {}, {}, {}"
-
-    get_svm_clock_status:
-        description:    Return whether the clock is enabled/disabled for the SVM CAM TCS (Clk_50MHz_nom, Clk_50MHz_red,
-                        Clk_heater_nom, and Clk_heater_red).
-        cmd:            "CNTRL:SVM:CLOCK?"
-
-    get_svm_clock_quality:
-        description:    Returns the status of the synchronisation generator for the SVM CAM TCS (Clk_50MHz_nom,
-                        Clk_50MHz_red, Clk_heater_nom, and Clk_heater_red).
-        cmd:            "MEAS:SVM:CLOCK:QUAL?"
-
-    get_led_status:
-        description:    Return the status of the leds (stand-by mode, self-test mode, functional check and TVAC
-                        operating mode, alignment operating mode, selected N-CAM, selected F-CAM, secondary power line
-                        V_CCD, secondary power line V_CLK, secondary power line V_AN1, secondary power line V_AN2,
-                        secondary power line V_AN3, secondary power line V_DIG, secondary voltage generation
-                        out-of-range, secondary current generation out-of-range, synchronisation generator failure,
-                        clock Clk_50MHz, clock Clk_ccdread, clock Clk_heater, nominal clock for the F-CAM Clk_F_FEE_N,
-                        redundant clock for the N-CAM Clk_F_FEE_R, and test port active).
-        cmd:            "MEAS:LED?"
-
-    set_operating_mode:
-        description:    Configure the mode (0 for stand-by mode, 1 for self-test mode, 2 for alignment operating mode,
-                        and 4 for functional and TVAC operating mode).
-        cmd:            "CNTRL:MODE {}"
-
-    get_operating_mode:
-        description:    Return the actual mode (0 for stand-by mode, 1 for self-test mode, 2 for alignment operating
-                        mode, and 4 for functional and TVAC operating mode).
-        cmd:            "CNTRL:MODE?"
-
-    get_data:
-        description:    Return all relevant data. This includes the actual current values (for N-CAM and F-CAM), the
-                        actual voltage values (for N-CAM and F-CAM), and the led status.
-        cmd:            "MEAS:ALL:ANALOG?"
-
-    get_error_info:
-        description:    Read the oldest error information the error queue.  The error queue can store up to 16 errors.
-                        Use the clear_error_queu command to clear the error queue.
-        cmd:            "SYST:ERR?"
-
-    get_num_errors:
-        description:    Return the number of errors in the error queue.  Use the clear_error_queu command to clear the
-                        error queue.
-        cmd:            "SYST:ERR:QUANT?"
-
-    get_selftest_result:
-        description:    Return the status/result of the self-test.
-        cmd:            "SYST:TEST:RESULT?"
-
-    get_protection_status:
-        description:    Return the status of the protections (status of the emergency button, OVP for PSU nominal,
-                        OVP for PSU redundant, OVP for PDU).
-        cmd:            "SYST:PROT?"
-
-    set_time:
-        description:    Configure the start-up and detection time.
-        cmd:            "SYST:TIME:PROT {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, "
-
-    get_time:
-        description:    Return the start and detection time.
-        cmd:            "SYST:TIME:PROT?"