v86 0.4.0 → 0.5.10

package/bios/seabios/src/hw/tpm_drivers.h

@@ -1,127 +0,0 @@
-#ifndef TPM_DRIVERS_H
-#define TPM_DRIVERS_H
-
-#include "types.h" // u32
-
-
-enum tpmDurationType {
-    TPM_DURATION_TYPE_SHORT = 0,
-    TPM_DURATION_TYPE_MEDIUM,
-    TPM_DURATION_TYPE_LONG,
-};
-
-typedef u8 TPMVersion;
-
-#define TPM_VERSION_NONE 0
-#define TPM_VERSION_1_2  1
-#define TPM_VERSION_2    2
-
-TPMVersion tpmhw_probe(void);
-int tpmhw_is_present(void);
-struct tpm_req_header;
-int tpmhw_transmit(u8 locty, struct tpm_req_header *req,
-                   void *respbuffer, u32 *respbufferlen,
-                   enum tpmDurationType to_t);
-void tpmhw_set_timeouts(u32 timeouts[4], u32 durations[3]);
-
-/* CRB driver */
-/* address of locality 0 (CRB) */
-#define TPM_CRB_BASE_ADDRESS        0xfed40000
-
-#define CRB_REG(LOCTY, REG)                                 \
-    (void *)(TPM_CRB_BASE_ADDRESS + (LOCTY << 12) + REG)
-
-/* hardware registers */
-#define CRB_REG_LOC_STATE              0x0
-#define CRB_REG_LOC_CTRL               0x8
-#define CRB_REG_LOC_STS                0xC
-#define CRB_REG_INTF_ID                0x30
-#define CRB_REG_CTRL_EXT               0x38
-#define CRB_REG_CTRL_REQ               0x40
-#define CRB_REG_CTRL_STS               0x44
-#define CRB_REG_CTRL_CANCEL            0x48
-#define CRB_REG_CTRL_START             0x4C
-#define CRB_REG_INT_ENABLE             0x50
-#define CRB_REG_INT_STS                0x54
-#define CRB_REG_CTRL_CMD_SIZE          0x58
-#define CRB_REG_CTRL_CMD_LADDR         0x5C
-#define CRB_REG_CTRL_CMD_HADDR         0x60
-#define CRB_REG_CTRL_RSP_SIZE          0x64
-#define CRB_REG_CTRL_RSP_ADDR          0x68
-#define CRB_REG_DATA_BUFFER            0x80
-
-/* TIS driver */
-/* address of locality 0 (TIS) */
-#define TPM_TIS_BASE_ADDRESS        0xfed40000
-
-#define TIS_REG(LOCTY, REG) \
-    (void *)(TPM_TIS_BASE_ADDRESS + (LOCTY << 12) + REG)
-
-/* hardware registers */
-#define TIS_REG_ACCESS                 0x0
-#define TIS_REG_INT_ENABLE             0x8
-#define TIS_REG_INT_VECTOR             0xc
-#define TIS_REG_INT_STATUS             0x10
-#define TIS_REG_INTF_CAPABILITY        0x14
-#define TIS_REG_STS                    0x18
-#define TIS_REG_DATA_FIFO              0x24
-#define TIS_REG_IFACE_ID               0x30
-#define TIS_REG_DID_VID                0xf00
-#define TIS_REG_RID                    0xf04
-
-#define TIS_STS_VALID                  (1 << 7) /* 0x80 */
-#define TIS_STS_COMMAND_READY          (1 << 6) /* 0x40 */
-#define TIS_STS_TPM_GO                 (1 << 5) /* 0x20 */
-#define TIS_STS_DATA_AVAILABLE         (1 << 4) /* 0x10 */
-#define TIS_STS_EXPECT                 (1 << 3) /* 0x08 */
-#define TIS_STS_RESPONSE_RETRY         (1 << 1) /* 0x02 */
-
-#define TIS_ACCESS_TPM_REG_VALID_STS   (1 << 7) /* 0x80 */
-#define TIS_ACCESS_ACTIVE_LOCALITY     (1 << 5) /* 0x20 */
-#define TIS_ACCESS_BEEN_SEIZED         (1 << 4) /* 0x10 */
-#define TIS_ACCESS_SEIZE               (1 << 3) /* 0x08 */
-#define TIS_ACCESS_PENDING_REQUEST     (1 << 2) /* 0x04 */
-#define TIS_ACCESS_REQUEST_USE         (1 << 1) /* 0x02 */
-#define TIS_ACCESS_TPM_ESTABLISHMENT   (1 << 0) /* 0x01 */
-
-/*
- * Default TIS timeouts used before getting them from the TPM itself
- */
-#define TIS_DEFAULT_TIMEOUT_A           750000 /* us */
-#define TIS_DEFAULT_TIMEOUT_B          2000000 /* us */
-#define TIS_DEFAULT_TIMEOUT_C           750000 /* us */
-#define TIS_DEFAULT_TIMEOUT_D           750000 /* us */
-
-/*
- * Default TIS 2 timeouts given in TPM Profile (TPT) Spec
- */
-#define TIS2_DEFAULT_TIMEOUT_A          750000 /* us */
-#define TIS2_DEFAULT_TIMEOUT_B         2000000 /* us */
-#define TIS2_DEFAULT_TIMEOUT_C          200000 /* us */
-#define TIS2_DEFAULT_TIMEOUT_D           30000 /* us */
-
-enum tisTimeoutType {
-    TIS_TIMEOUT_TYPE_A = 0,
-    TIS_TIMEOUT_TYPE_B,
-    TIS_TIMEOUT_TYPE_C,
-    TIS_TIMEOUT_TYPE_D,
-};
-
-/*
- * Default command durations used before getting them from the
- * TPM itself
- */
-#define TPM_DEFAULT_DURATION_SHORT      2000000 /* us */
-#define TPM_DEFAULT_DURATION_MEDIUM    20000000 /* us */
-#define TPM_DEFAULT_DURATION_LONG      60000000 /* us */
-
-/*
- * TPM 2 command durations; we set them to the timeout values
- * given in TPM Profile (PTP) Specification; exceeding those
- * timeout values indicates a faulty TPM.
- */
-#define TPM2_DEFAULT_DURATION_SHORT       750000 /* us */
-#define TPM2_DEFAULT_DURATION_MEDIUM     2000000 /* us */
-#define TPM2_DEFAULT_DURATION_LONG       2000000 /* us */
-
-#endif /* TPM_DRIVERS_H */