v86 0.4.0 → 0.5.10

package/bios/seabios/src/hw/usb.h

@@ -1,254 +0,0 @@
-// USB functions and data.
-#ifndef __USB_H
-#define __USB_H
-
-#include "stacks.h" // struct mutex_s
-
-// Information on a USB end point.
-struct usb_pipe {
-    union {
-        struct usb_s *cntl;
-        struct usb_pipe *freenext;
-    };
-    u8 type;
-    u8 ep;
-    u8 devaddr;
-    u8 speed;
-    u16 maxpacket;
-    u8 eptype;
-};
-
-// Common information for usb devices.
-struct usbdevice_s {
-    struct usbhub_s *hub;
-    struct usb_pipe *defpipe;
-    u32 port;
-    struct usb_config_descriptor *config;
-    struct usb_interface_descriptor *iface;
-    int imax;
-    u8 speed;
-    u8 devaddr;
-};
-
-// Common information for usb controllers.
-struct usb_s {
-    struct usb_pipe *freelist;
-    struct mutex_s resetlock;
-    struct pci_device *pci;
-    u8 type;
-    u8 maxaddr;
-};
-
-// Information for enumerating USB hubs
-struct usbhub_s {
-    struct usbhub_op_s *op;
-    struct usbdevice_s *usbdev;
-    struct usb_s *cntl;
-    struct mutex_s lock;
-    u32 detectend;
-    u32 port;
-    u32 threads;
-    u32 portcount;
-    u32 devcount;
-};
-
-// Hub callback (32bit) info
-struct usbhub_op_s {
-    int (*detect)(struct usbhub_s *hub, u32 port);
-    int (*reset)(struct usbhub_s *hub, u32 port);
-    int (*portmap)(struct usbhub_s *hub, u32 port);
-    void (*disconnect)(struct usbhub_s *hub, u32 port);
-};
-
-#define USB_TYPE_UHCI  1
-#define USB_TYPE_OHCI  2
-#define USB_TYPE_EHCI  3
-#define USB_TYPE_XHCI  4
-
-#define USB_FULLSPEED  0
-#define USB_LOWSPEED   1
-#define USB_HIGHSPEED  2
-#define USB_SUPERSPEED 3
-
-#define USB_MAXADDR  127
-
-
-/****************************************************************
- * usb structs and flags
- ****************************************************************/
-
-// USB mandated timings (in ms)
-#define USB_TIME_SIGATT 100
-#define USB_TIME_ATTDB  100
-#define USB_TIME_DRST   10
-#define USB_TIME_DRSTR  50
-#define USB_TIME_RSTRCY 10
-
-#define USB_TIME_STATUS  50
-#define USB_TIME_DATAIN  500
-#define USB_TIME_COMMAND 5000
-
-#define USB_TIME_SETADDR_RECOVERY 2
-
-#define USB_PID_OUT                     0xe1
-#define USB_PID_IN                      0x69
-#define USB_PID_SETUP                   0x2d
-
-#define USB_DIR_OUT                     0               /* to device */
-#define USB_DIR_IN                      0x80            /* to host */
-
-#define USB_TYPE_MASK                   (0x03 << 5)
-#define USB_TYPE_STANDARD               (0x00 << 5)
-#define USB_TYPE_CLASS                  (0x01 << 5)
-#define USB_TYPE_VENDOR                 (0x02 << 5)
-#define USB_TYPE_RESERVED               (0x03 << 5)
-
-#define USB_RECIP_MASK                  0x1f
-#define USB_RECIP_DEVICE                0x00
-#define USB_RECIP_INTERFACE             0x01
-#define USB_RECIP_ENDPOINT              0x02
-#define USB_RECIP_OTHER                 0x03
-
-#define USB_REQ_GET_STATUS              0x00
-#define USB_REQ_CLEAR_FEATURE           0x01
-#define USB_REQ_SET_FEATURE             0x03
-#define USB_REQ_SET_ADDRESS             0x05
-#define USB_REQ_GET_DESCRIPTOR          0x06
-#define USB_REQ_SET_DESCRIPTOR          0x07
-#define USB_REQ_GET_CONFIGURATION       0x08
-#define USB_REQ_SET_CONFIGURATION       0x09
-#define USB_REQ_GET_INTERFACE           0x0A
-#define USB_REQ_SET_INTERFACE           0x0B
-#define USB_REQ_SYNCH_FRAME             0x0C
-
-struct usb_ctrlrequest {
-    u8 bRequestType;
-    u8 bRequest;
-    u16 wValue;
-    u16 wIndex;
-    u16 wLength;
-} PACKED;
-
-#define USB_DT_DEVICE                   0x01
-#define USB_DT_CONFIG                   0x02
-#define USB_DT_STRING                   0x03
-#define USB_DT_INTERFACE                0x04
-#define USB_DT_ENDPOINT                 0x05
-#define USB_DT_DEVICE_QUALIFIER         0x06
-#define USB_DT_OTHER_SPEED_CONFIG       0x07
-#define USB_DT_ENDPOINT_COMPANION       0x30
-
-struct usb_device_descriptor {
-    u8  bLength;
-    u8  bDescriptorType;
-
-    u16 bcdUSB;
-    u8  bDeviceClass;
-    u8  bDeviceSubClass;
-    u8  bDeviceProtocol;
-    u8  bMaxPacketSize0;
-    u16 idVendor;
-    u16 idProduct;
-    u16 bcdDevice;
-    u8  iManufacturer;
-    u8  iProduct;
-    u8  iSerialNumber;
-    u8  bNumConfigurations;
-} PACKED;
-
-#define USB_CLASS_PER_INTERFACE         0       /* for DeviceClass */
-#define USB_CLASS_AUDIO                 1
-#define USB_CLASS_COMM                  2
-#define USB_CLASS_HID                   3
-#define USB_CLASS_PHYSICAL              5
-#define USB_CLASS_STILL_IMAGE           6
-#define USB_CLASS_PRINTER               7
-#define USB_CLASS_MASS_STORAGE          8
-#define USB_CLASS_HUB                   9
-
-struct usb_config_descriptor {
-    u8  bLength;
-    u8  bDescriptorType;
-
-    u16 wTotalLength;
-    u8  bNumInterfaces;
-    u8  bConfigurationValue;
-    u8  iConfiguration;
-    u8  bmAttributes;
-    u8  bMaxPower;
-} PACKED;
-
-struct usb_interface_descriptor {
-    u8  bLength;
-    u8  bDescriptorType;
-
-    u8  bInterfaceNumber;
-    u8  bAlternateSetting;
-    u8  bNumEndpoints;
-    u8  bInterfaceClass;
-    u8  bInterfaceSubClass;
-    u8  bInterfaceProtocol;
-    u8  iInterface;
-} PACKED;
-
-struct usb_endpoint_descriptor {
-    u8  bLength;
-    u8  bDescriptorType;
-
-    u8  bEndpointAddress;
-    u8  bmAttributes;
-    u16 wMaxPacketSize;
-    u8  bInterval;
-} PACKED;
-
-#define USB_ENDPOINT_NUMBER_MASK        0x0f    /* in bEndpointAddress */
-#define USB_ENDPOINT_DIR_MASK           0x80
-
-#define USB_ENDPOINT_XFERTYPE_MASK      0x03    /* in bmAttributes */
-#define USB_ENDPOINT_XFER_CONTROL       0
-#define USB_ENDPOINT_XFER_ISOC          1
-#define USB_ENDPOINT_XFER_BULK          2
-#define USB_ENDPOINT_XFER_INT           3
-#define USB_ENDPOINT_MAX_ADJUSTABLE     0x80
-
-#define USB_CONTROL_SETUP_SIZE          8
-
-
-/****************************************************************
- * usb mass storage flags
- ****************************************************************/
-
-#define US_SC_ATAPI_8020   0x02
-#define US_SC_ATAPI_8070   0x05
-#define US_SC_SCSI         0x06
-
-#define US_PR_BULK         0x50  /* bulk-only transport */
-#define US_PR_UAS          0x62  /* usb attached scsi   */
-
-/****************************************************************
- * function defs
- ****************************************************************/
-
-// usb.c
-int usb_send_bulk(struct usb_pipe *pipe, int dir, void *data, int datasize);
-int usb_poll_intr(struct usb_pipe *pipe, void *data);
-int usb_32bit_pipe(struct usb_pipe *pipe_fl);
-struct usb_pipe *usb_alloc_pipe(struct usbdevice_s *usbdev
-                                , struct usb_endpoint_descriptor *epdesc);
-void usb_free_pipe(struct usbdevice_s *usbdev, struct usb_pipe *pipe);
-int usb_send_default_control(struct usb_pipe *pipe
-                             , const struct usb_ctrlrequest *req, void *data);
-int usb_is_freelist(struct usb_s *cntl, struct usb_pipe *pipe);
-void usb_add_freelist(struct usb_pipe *pipe);
-struct usb_pipe *usb_get_freelist(struct usb_s *cntl, u8 eptype);
-void usb_desc2pipe(struct usb_pipe *pipe, struct usbdevice_s *usbdev
-                   , struct usb_endpoint_descriptor *epdesc);
-int usb_get_period(struct usbdevice_s *usbdev
-                   , struct usb_endpoint_descriptor *epdesc);
-int usb_xfer_time(struct usb_pipe *pipe, int datalen);
-struct usb_endpoint_descriptor *usb_find_desc(struct usbdevice_s *usbdev
-                                              , int type, int dir);
-void usb_enumerate(struct usbhub_s *hub);
-void usb_setup(void);
-
-#endif // usb.h

package/bios/seabios/src/hw/virtio-blk.c

@@ -1,211 +0,0 @@
-// Virtio block boot support.
-//
-// Copyright (C) 2010 Red Hat Inc.
-//
-// Authors:
-//  Gleb Natapov <gnatapov@redhat.com>
-//
-// This file may be distributed under the terms of the GNU LGPLv3 license.
-
-#include "biosvar.h" // GET_GLOBALFLAT
-#include "config.h" // CONFIG_*
-#include "block.h" // struct drive_s
-#include "malloc.h" // free
-#include "output.h" // dprintf
-#include "pcidevice.h" // foreachpci
-#include "pci_ids.h" // PCI_DEVICE_ID_VIRTIO_BLK
-#include "pci_regs.h" // PCI_VENDOR_ID
-#include "stacks.h" // run_thread
-#include "std/disk.h" // DISK_RET_SUCCESS
-#include "string.h" // memset
-#include "util.h" // usleep
-#include "virtio-pci.h"
-#include "virtio-ring.h"
-#include "virtio-blk.h"
-
-struct virtiodrive_s {
-    struct drive_s drive;
-    struct vring_virtqueue *vq;
-    struct vp_device vp;
-};
-
-static int
-virtio_blk_op(struct disk_op_s *op, int write)
-{
-    struct virtiodrive_s *vdrive =
-        container_of(op->drive_fl, struct virtiodrive_s, drive);
-    struct vring_virtqueue *vq = vdrive->vq;
-    struct virtio_blk_outhdr hdr = {
-        .type = write ? VIRTIO_BLK_T_OUT : VIRTIO_BLK_T_IN,
-        .ioprio = 0,
-        .sector = op->lba,
-    };
-    u8 status = VIRTIO_BLK_S_UNSUPP;
-    struct vring_list sg[] = {
-        {
-            .addr       = (void*)(&hdr),
-            .length     = sizeof(hdr),
-        },
-        {
-            .addr       = op->buf_fl,
-            .length     = vdrive->drive.blksize * op->count,
-        },
-        {
-            .addr       = (void*)(&status),
-            .length     = sizeof(status),
-        },
-    };
-
-    /* Add to virtqueue and kick host */
-    if (write)
-        vring_add_buf(vq, sg, 2, 1, 0, 0);
-    else
-        vring_add_buf(vq, sg, 1, 2, 0, 0);
-    vring_kick(&vdrive->vp, vq, 1);
-
-    /* Wait for reply */
-    while (!vring_more_used(vq))
-        usleep(5);
-
-    /* Reclaim virtqueue element */
-    vring_get_buf(vq, NULL);
-
-    /* Clear interrupt status register.  Avoid leaving interrupts stuck if
-     * VRING_AVAIL_F_NO_INTERRUPT was ignored and interrupts were raised.
-     */
-    vp_get_isr(&vdrive->vp);
-
-    return status == VIRTIO_BLK_S_OK ? DISK_RET_SUCCESS : DISK_RET_EBADTRACK;
-}
-
-int
-virtio_blk_process_op(struct disk_op_s *op)
-{
-    if (! CONFIG_VIRTIO_BLK)
-        return 0;
-    switch (op->command) {
-    case CMD_READ:
-        return virtio_blk_op(op, 0);
-    case CMD_WRITE:
-        return virtio_blk_op(op, 1);
-    default:
-        return default_process_op(op);
-    }
-}
-
-static void
-init_virtio_blk(void *data)
-{
-    struct pci_device *pci = data;
-    u8 status = VIRTIO_CONFIG_S_ACKNOWLEDGE | VIRTIO_CONFIG_S_DRIVER;
-    dprintf(1, "found virtio-blk at %pP\n", pci);
-    struct virtiodrive_s *vdrive = malloc_low(sizeof(*vdrive));
-    if (!vdrive) {
-        warn_noalloc();
-        return;
-    }
-    memset(vdrive, 0, sizeof(*vdrive));
-    vdrive->drive.type = DTYPE_VIRTIO_BLK;
-    vdrive->drive.cntl_id = pci->bdf;
-
-    vp_init_simple(&vdrive->vp, pci);
-    if (vp_find_vq(&vdrive->vp, 0, &vdrive->vq) < 0 ) {
-        dprintf(1, "fail to find vq for virtio-blk %pP\n", pci);
-        goto fail;
-    }
-
-    if (vdrive->vp.use_modern) {
-        struct vp_device *vp = &vdrive->vp;
-        u64 features = vp_get_features(vp);
-        u64 version1 = 1ull << VIRTIO_F_VERSION_1;
-        u64 iommu_platform = 1ull << VIRTIO_F_IOMMU_PLATFORM;
-        u64 blk_size = 1ull << VIRTIO_BLK_F_BLK_SIZE;
-        if (!(features & version1)) {
-            dprintf(1, "modern device without virtio_1 feature bit: %pP\n", pci);
-            goto fail;
-        }
-
-        features = features & (version1 | iommu_platform | blk_size);
-        vp_set_features(vp, features);
-        status |= VIRTIO_CONFIG_S_FEATURES_OK;
-        vp_set_status(vp, status);
-        if (!(vp_get_status(vp) & VIRTIO_CONFIG_S_FEATURES_OK)) {
-            dprintf(1, "device didn't accept features: %pP\n", pci);
-            goto fail;
-        }
-
-        vdrive->drive.sectors =
-            vp_read(&vp->device, struct virtio_blk_config, capacity);
-        if (features & blk_size) {
-            vdrive->drive.blksize =
-                vp_read(&vp->device, struct virtio_blk_config, blk_size);
-        } else {
-            vdrive->drive.blksize = DISK_SECTOR_SIZE;
-        }
-        if (vdrive->drive.blksize != DISK_SECTOR_SIZE) {
-            dprintf(1, "virtio-blk %pP block size %d is unsupported\n",
-                    pci, vdrive->drive.blksize);
-            goto fail;
-        }
-        dprintf(3, "virtio-blk %pP blksize=%d sectors=%u\n",
-                pci, vdrive->drive.blksize, (u32)vdrive->drive.sectors);
-
-        vdrive->drive.pchs.cylinder =
-            vp_read(&vp->device, struct virtio_blk_config, cylinders);
-        vdrive->drive.pchs.head =
-            vp_read(&vp->device, struct virtio_blk_config, heads);
-        vdrive->drive.pchs.sector =
-            vp_read(&vp->device, struct virtio_blk_config, sectors);
-    } else {
-        struct virtio_blk_config cfg;
-        vp_get_legacy(&vdrive->vp, 0, &cfg, sizeof(cfg));
-
-        u64 f = vp_get_features(&vdrive->vp);
-        vdrive->drive.blksize = (f & (1 << VIRTIO_BLK_F_BLK_SIZE)) ?
-            cfg.blk_size : DISK_SECTOR_SIZE;
-
-        vdrive->drive.sectors = cfg.capacity;
-        dprintf(3, "virtio-blk %pP blksize=%d sectors=%u\n",
-                pci, vdrive->drive.blksize, (u32)vdrive->drive.sectors);
-
-        if (vdrive->drive.blksize != DISK_SECTOR_SIZE) {
-            dprintf(1, "virtio-blk %pP block size %d is unsupported\n",
-                    pci, vdrive->drive.blksize);
-            goto fail;
-        }
-        vdrive->drive.pchs.cylinder = cfg.cylinders;
-        vdrive->drive.pchs.head = cfg.heads;
-        vdrive->drive.pchs.sector = cfg.sectors;
-    }
-
-    char *desc = znprintf(MAXDESCSIZE, "Virtio disk PCI:%pP", pci);
-    boot_add_hd(&vdrive->drive, desc, bootprio_find_pci_device(pci));
-
-    status |= VIRTIO_CONFIG_S_DRIVER_OK;
-    vp_set_status(&vdrive->vp, status);
-    return;
-
-fail:
-    vp_reset(&vdrive->vp);
-    free(vdrive->vq);
-    free(vdrive);
-}
-
-void
-virtio_blk_setup(void)
-{
-    ASSERT32FLAT();
-    if (! CONFIG_VIRTIO_BLK)
-        return;
-
-    dprintf(3, "init virtio-blk\n");
-
-    struct pci_device *pci;
-    foreachpci(pci) {
-        if (pci->vendor != PCI_VENDOR_ID_REDHAT_QUMRANET ||
-            (pci->device != PCI_DEVICE_ID_VIRTIO_BLK_09 &&
-             pci->device != PCI_DEVICE_ID_VIRTIO_BLK_10))
-            continue;
-        run_thread(init_virtio_blk, pci);
-    }
-}

package/bios/seabios/src/hw/virtio-blk.h

@@ -1,43 +0,0 @@
-#ifndef _VIRTIO_BLK_H
-#define _VIRTIO_BLK_H
-
-struct virtio_blk_config
-{
-    u64 capacity;
-    u32 size_max;
-    u32 seg_max;
-    u16 cylinders;
-    u8 heads;
-    u8 sectors;
-    u32 blk_size;
-    u8 physical_block_exp;
-    u8 alignment_offset;
-    u16 min_io_size;
-    u32 opt_io_size;
-} __attribute__((packed));
-
-#define VIRTIO_BLK_F_BLK_SIZE 6
-
-/* These two define direction. */
-#define VIRTIO_BLK_T_IN         0
-#define VIRTIO_BLK_T_OUT        1
-
-/* This is the first element of the read scatter-gather list. */
-struct virtio_blk_outhdr {
-    /* VIRTIO_BLK_T* */
-    u32 type;
-    /* io priority. */
-    u32 ioprio;
-    /* Sector (ie. 512 byte offset) */
-    u64 sector;
-};
-
-#define VIRTIO_BLK_S_OK         0
-#define VIRTIO_BLK_S_IOERR      1
-#define VIRTIO_BLK_S_UNSUPP     2
-
-struct disk_op_s;
-int virtio_blk_process_op(struct disk_op_s *op);
-void virtio_blk_setup(void);
-
-#endif /* _VIRTIO_BLK_H */