v86 0.3.4 → 0.3.7

package/bios/seabios/src/hw/tpm_drivers.h

@@ -0,0 +1,127 @@
+#ifndef TPM_DRIVERS_H
+#define TPM_DRIVERS_H
+
+#include "types.h" // u32
+
+
+enum tpmDurationType {
+    TPM_DURATION_TYPE_SHORT = 0,
+    TPM_DURATION_TYPE_MEDIUM,
+    TPM_DURATION_TYPE_LONG,
+};
+
+typedef u8 TPMVersion;
+
+#define TPM_VERSION_NONE 0
+#define TPM_VERSION_1_2  1
+#define TPM_VERSION_2    2
+
+TPMVersion tpmhw_probe(void);
+int tpmhw_is_present(void);
+struct tpm_req_header;
+int tpmhw_transmit(u8 locty, struct tpm_req_header *req,
+                   void *respbuffer, u32 *respbufferlen,
+                   enum tpmDurationType to_t);
+void tpmhw_set_timeouts(u32 timeouts[4], u32 durations[3]);
+
+/* CRB driver */
+/* address of locality 0 (CRB) */
+#define TPM_CRB_BASE_ADDRESS        0xfed40000
+
+#define CRB_REG(LOCTY, REG)                                 \
+    (void *)(TPM_CRB_BASE_ADDRESS + (LOCTY << 12) + REG)
+
+/* hardware registers */
+#define CRB_REG_LOC_STATE              0x0
+#define CRB_REG_LOC_CTRL               0x8
+#define CRB_REG_LOC_STS                0xC
+#define CRB_REG_INTF_ID                0x30
+#define CRB_REG_CTRL_EXT               0x38
+#define CRB_REG_CTRL_REQ               0x40
+#define CRB_REG_CTRL_STS               0x44
+#define CRB_REG_CTRL_CANCEL            0x48
+#define CRB_REG_CTRL_START             0x4C
+#define CRB_REG_INT_ENABLE             0x50
+#define CRB_REG_INT_STS                0x54
+#define CRB_REG_CTRL_CMD_SIZE          0x58
+#define CRB_REG_CTRL_CMD_LADDR         0x5C
+#define CRB_REG_CTRL_CMD_HADDR         0x60
+#define CRB_REG_CTRL_RSP_SIZE          0x64
+#define CRB_REG_CTRL_RSP_ADDR          0x68
+#define CRB_REG_DATA_BUFFER            0x80
+
+/* TIS driver */
+/* address of locality 0 (TIS) */
+#define TPM_TIS_BASE_ADDRESS        0xfed40000
+
+#define TIS_REG(LOCTY, REG) \
+    (void *)(TPM_TIS_BASE_ADDRESS + (LOCTY << 12) + REG)
+
+/* hardware registers */
+#define TIS_REG_ACCESS                 0x0
+#define TIS_REG_INT_ENABLE             0x8
+#define TIS_REG_INT_VECTOR             0xc
+#define TIS_REG_INT_STATUS             0x10
+#define TIS_REG_INTF_CAPABILITY        0x14
+#define TIS_REG_STS                    0x18
+#define TIS_REG_DATA_FIFO              0x24
+#define TIS_REG_IFACE_ID               0x30
+#define TIS_REG_DID_VID                0xf00
+#define TIS_REG_RID                    0xf04
+
+#define TIS_STS_VALID                  (1 << 7) /* 0x80 */
+#define TIS_STS_COMMAND_READY          (1 << 6) /* 0x40 */
+#define TIS_STS_TPM_GO                 (1 << 5) /* 0x20 */
+#define TIS_STS_DATA_AVAILABLE         (1 << 4) /* 0x10 */
+#define TIS_STS_EXPECT                 (1 << 3) /* 0x08 */
+#define TIS_STS_RESPONSE_RETRY         (1 << 1) /* 0x02 */
+
+#define TIS_ACCESS_TPM_REG_VALID_STS   (1 << 7) /* 0x80 */
+#define TIS_ACCESS_ACTIVE_LOCALITY     (1 << 5) /* 0x20 */
+#define TIS_ACCESS_BEEN_SEIZED         (1 << 4) /* 0x10 */
+#define TIS_ACCESS_SEIZE               (1 << 3) /* 0x08 */
+#define TIS_ACCESS_PENDING_REQUEST     (1 << 2) /* 0x04 */
+#define TIS_ACCESS_REQUEST_USE         (1 << 1) /* 0x02 */
+#define TIS_ACCESS_TPM_ESTABLISHMENT   (1 << 0) /* 0x01 */
+
+/*
+ * Default TIS timeouts used before getting them from the TPM itself
+ */
+#define TIS_DEFAULT_TIMEOUT_A           750000 /* us */
+#define TIS_DEFAULT_TIMEOUT_B          2000000 /* us */
+#define TIS_DEFAULT_TIMEOUT_C           750000 /* us */
+#define TIS_DEFAULT_TIMEOUT_D           750000 /* us */
+
+/*
+ * Default TIS 2 timeouts given in TPM Profile (TPT) Spec
+ */
+#define TIS2_DEFAULT_TIMEOUT_A          750000 /* us */
+#define TIS2_DEFAULT_TIMEOUT_B         2000000 /* us */
+#define TIS2_DEFAULT_TIMEOUT_C          200000 /* us */
+#define TIS2_DEFAULT_TIMEOUT_D           30000 /* us */
+
+enum tisTimeoutType {
+    TIS_TIMEOUT_TYPE_A = 0,
+    TIS_TIMEOUT_TYPE_B,
+    TIS_TIMEOUT_TYPE_C,
+    TIS_TIMEOUT_TYPE_D,
+};
+
+/*
+ * Default command durations used before getting them from the
+ * TPM itself
+ */
+#define TPM_DEFAULT_DURATION_SHORT      2000000 /* us */
+#define TPM_DEFAULT_DURATION_MEDIUM    20000000 /* us */
+#define TPM_DEFAULT_DURATION_LONG      60000000 /* us */
+
+/*
+ * TPM 2 command durations; we set them to the timeout values
+ * given in TPM Profile (PTP) Specification; exceeding those
+ * timeout values indicates a faulty TPM.
+ */
+#define TPM2_DEFAULT_DURATION_SHORT       750000 /* us */
+#define TPM2_DEFAULT_DURATION_MEDIUM     2000000 /* us */
+#define TPM2_DEFAULT_DURATION_LONG       2000000 /* us */
+
+#endif /* TPM_DRIVERS_H */