node-liblzma 1.0.4 → 1.1.6

package/deps/xz/share/doc/xz/NEWS

@@ -1,505 +0,0 @@
-
-XZ Utils Release Notes
-======================
-
-5.2.2 (2015-09-29)
-
-    * Fixed bugs in QNX-specific code.
-
-    * Omitted the use of pipe2() even if it is available to avoid
-      portability issues with some old Linux and glibc combinations.
-
-    * Updated German translation.
-
-    * Added project files to build static and shared liblzma (not the
-      whole XZ Utils) with Visual Studio 2013 update 2 or later.
-
-    * Documented that threaded decompression hasn't been implemented
-      yet. A 5.2.0 NEWS entry describing multi-threading support had
-      incorrectly said "decompression" when it should have said
-      "compression".
-
-
-5.2.1 (2015-02-26)
-
-    * Fixed a compression-ratio regression in fast mode of LZMA1 and
-      LZMA2. The bug is present in 5.1.4beta and 5.2.0 releases.
-
-    * Fixed a portability problem in xz that affected at least OpenBSD.
-
-    * Fixed xzdiff to be compatible with FreeBSD's mktemp which differs
-      from most other mktemp implementations.
-
-    * Changed CPU core count detection to use cpuset_getaffinity() on
-      FreeBSD.
-
-
-5.2.0 (2014-12-21)
-
-    Since 5.1.4beta:
-
-    * All fixes from 5.0.8
-
-    * liblzma: Fixed lzma_stream_encoder_mt_memusage() when a preset
-      was used.
-
-    * xzdiff: If mktemp isn't installed, mkdir will be used as
-      a fallback to create a temporary directory. Installing mktemp
-      is still recommended.
-
-    * Updated French, German, Italian, Polish, and Vietnamese
-      translations.
-
-    Summary of fixes and new features added in the 5.1.x development
-    releases:
-
-    * liblzma:
-
-        - Added support for multi-threaded compression. See the
-          lzma_mt structure, lzma_stream_encoder_mt(), and
-          lzma_stream_encoder_mt_memusage() in <lzma/container.h>,
-          lzma_get_progress() in <lzma/base.h>, and lzma_cputhreads()
-          in <lzma/hardware.h> for details.
-
-        - Made the uses of lzma_allocator const correct.
-
-        - Added lzma_block_uncomp_encode() to create uncompressed
-          .xz Blocks using LZMA2 uncompressed chunks.
-
-        - Added support for LZMA_IGNORE_CHECK.
-
-        - A few speed optimizations were made.
-
-        - Added support for symbol versioning. It is enabled by default
-          on GNU/Linux, other GNU-based systems, and FreeBSD.
-
-        - liblzma (not the whole XZ Utils) should now be buildable
-          with MSVC 2013 update 2 or later using windows/config.h.
-
-    * xz:
-
-        - Fixed a race condition in the signal handling. It was
-          possible that e.g. the first SIGINT didn't make xz exit
-          if reading or writing blocked and one had bad luck. The fix
-          is non-trivial, so as of writing it is unknown if it will be
-          backported to the v5.0 branch.
-
-        - Multi-threaded compression can be enabled with the
-          --threads (-T) option.
-          [Fixed: This originally said "decompression".]
-
-        - New command line options in xz: --single-stream,
-          --block-size=SIZE, --block-list=SIZES,
-          --flush-timeout=TIMEOUT, and --ignore-check.
-
-        - xz -lvv now shows the minimum xz version that is required to
-          decompress the file. Currently it is 5.0.0 for all supported
-          .xz files except files with empty LZMA2 streams require 5.0.2.
-
-    * xzdiff and xzgrep now support .lzo files if lzop is installed.
-      The .tzo suffix is also recognized as a shorthand for .tar.lzo.
-
-
-5.1.4beta (2014-09-14)
-
-    * All fixes from 5.0.6
-
-    * liblzma: Fixed the use of presets in threaded encoder
-      initialization.
-
-    * xz --block-list and --block-size can now be used together
-      in single-threaded mode. Previously the combination only
-      worked in multi-threaded mode.
-
-    * Added support for LZMA_IGNORE_CHECK to liblzma and made it
-      available in xz as --ignore-check.
-
-    * liblzma speed optimizations:
-
-        - Initialization of a new LZMA1 or LZMA2 encoder has been
-          optimized. (The speed of reinitializing an already-allocated
-          encoder isn't affected.) This helps when compressing many
-          small buffers with lzma_stream_buffer_encode() and other
-          similar situations where an already-allocated encoder state
-          isn't reused. This speed-up is visible in xz too if one
-          compresses many small files one at a time instead running xz
-          once and giving all files as command-line arguments.
-
-        - Buffer comparisons are now much faster when unaligned access
-          is allowed (configured with --enable-unaligned-access). This
-          speeds up encoding significantly. There is arch-specific code
-          for 32-bit and 64-bit x86 (32-bit needs SSE2 for the best
-          results and there's no run-time CPU detection for now).
-          For other archs there is only generic code which probably
-          isn't as optimal as arch-specific solutions could be.
-
-        - A few speed optimizations were made to the SHA-256 code.
-          (Note that the builtin SHA-256 code isn't used on all
-          operating systems.)
-
-    * liblzma can now be built with MSVC 2013 update 2 or later
-      using windows/config.h.
-
-    * Vietnamese translation was added.
-
-
-5.1.3alpha (2013-10-26)
-
-    * All fixes from 5.0.5
-
-    * liblzma:
-
-        - Fixed a deadlock in the threaded encoder.
-
-        - Made the uses of lzma_allocator const correct.
-
-        - Added lzma_block_uncomp_encode() to create uncompressed
-          .xz Blocks using LZMA2 uncompressed chunks.
-
-        - Added support for native threads on Windows and the ability
-          to detect the number of CPU cores.
-
-    * xz:
-
-        - Fixed a race condition in the signal handling. It was
-          possible that e.g. the first SIGINT didn't make xz exit
-          if reading or writing blocked and one had bad luck. The fix
-          is non-trivial, so as of writing it is unknown if it will be
-          backported to the v5.0 branch.
-
-        - Made the progress indicator work correctly in threaded mode.
-
-        - Threaded encoder now works together with --block-list=SIZES.
-
-        - Added preliminary support for --flush-timeout=TIMEOUT.
-          It can be useful for (somewhat) real-time streaming. For
-          now the decompression side has to be done with something
-          else than the xz tool due to how xz does buffering, but this
-          should be fixed.
-
-
-5.1.2alpha (2012-07-04)
-
-    * All fixes from 5.0.3 and 5.0.4
-
-    * liblzma:
-
-        - Fixed a deadlock and an invalid free() in the threaded encoder.
-
-        - Added support for symbol versioning. It is enabled by default
-          on GNU/Linux, other GNU-based systems, and FreeBSD.
-
-        - Use SHA-256 implementation from the operating system if one is
-          available in libc, libmd, or libutil. liblzma won't use e.g.
-          OpenSSL or libgcrypt to avoid introducing new dependencies.
-
-        - Fixed liblzma.pc for static linking.
-
-        - Fixed a few portability bugs.
-
-    * xz --decompress --single-stream now fixes the input position after
-      successful decompression. Now the following works:
-
-          echo foo | xz > foo.xz
-          echo bar | xz >> foo.xz
-          ( xz -dc --single-stream ; xz -dc --single-stream ) < foo.xz
-
-      Note that it doesn't work if the input is not seekable
-      or if there is Stream Padding between the concatenated
-      .xz Streams.
-
-    * xz -lvv now shows the minimum xz version that is required to
-      decompress the file. Currently it is 5.0.0 for all supported .xz
-      files except files with empty LZMA2 streams require 5.0.2.
-
-    * Added an *incomplete* implementation of --block-list=SIZES to xz.
-      It only works correctly in single-threaded mode and when
-      --block-size isn't used at the same time. --block-list allows
-      specifying the sizes of Blocks which can be useful e.g. when
-      creating files for random-access reading.
-
-
-5.1.1alpha (2011-04-12)
-
-    * All fixes from 5.0.2
-
-    * liblzma fixes that will also be included in 5.0.3:
-
-        - A memory leak was fixed.
-
-        - lzma_stream_buffer_encode() no longer creates an empty .xz
-          Block if encoding an empty buffer. Such an empty Block with
-          LZMA2 data would trigger a bug in 5.0.1 and older (see the
-          first bullet point in 5.0.2 notes). When releasing 5.0.2,
-          I thought that no encoder creates this kind of files but
-          I was wrong.
-
-        - Validate function arguments better in a few functions. Most
-          importantly, specifying an unsupported integrity check to
-          lzma_stream_buffer_encode() no longer creates a corrupt .xz
-          file. Probably no application tries to do that, so this
-          shouldn't be a big problem in practice.
-
-        - Document that lzma_block_buffer_encode(),
-          lzma_easy_buffer_encode(), lzma_stream_encoder(), and
-          lzma_stream_buffer_encode() may return LZMA_UNSUPPORTED_CHECK.
-
-        - The return values of the _memusage() functions are now
-          documented better.
-
-    * Support for multithreaded compression was added using the simplest
-      method, which splits the input data into blocks and compresses
-      them independently. Other methods will be added in the future.
-      The current method has room for improvement, e.g. it is possible
-      to reduce the memory usage.
-
-    * Added the options --single-stream and --block-size=SIZE to xz.
-
-    * xzdiff and xzgrep now support .lzo files if lzop is installed.
-      The .tzo suffix is also recognized as a shorthand for .tar.lzo.
-
-    * Support for short 8.3 filenames under DOS was added to xz. It is
-      experimental and may change before it gets into a stable release.
-
-
-5.0.8 (2014-12-21)
-
-    * Fixed an old bug in xzgrep that affected OpenBSD and probably
-      a few other operating systems too.
-
-    * Updated French and German translations.
-
-    * Added support for detecting the amount of RAM on AmigaOS/AROS.
-
-    * Minor build system updates.
-
-
-5.0.7 (2014-09-20)
-
-    * Fix regressions introduced in 5.0.6:
-
-        - Fix building with non-GNU make.
-
-        - Fix invalid Libs.private value in liblzma.pc which broke
-          static linking against liblzma if the linker flags were
-          taken from pkg-config.
-
-
-5.0.6 (2014-09-14)
-
-    * xzgrep now exits with status 0 if at least one file matched.
-
-    * A few minor portability and build system fixes
-
-
-5.0.5 (2013-06-30)
-
-    * lzmadec and liblzma's lzma_alone_decoder(): Support decompressing
-      .lzma files that have less common settings in the headers
-      (dictionary size other than 2^n or 2^n + 2^(n-1), or uncompressed
-      size greater than 256 GiB). The limitations existed to avoid false
-      positives when detecting .lzma files. The lc + lp <= 4 limitation
-      still remains since liblzma's LZMA decoder has that limitation.
-
-      NOTE: xz's .lzma support or liblzma's lzma_auto_decoder() are NOT
-      affected by this change. They still consider uncommon .lzma headers
-      as not being in the .lzma format. Changing this would give way too
-      many false positives.
-
-    * xz:
-
-        - Interaction of preset and custom filter chain options was
-          made less illogical. This affects only certain less typical
-          uses cases so few people are expected to notice this change.
-
-          Now when a custom filter chain option (e.g. --lzma2) is
-          specified, all preset options (-0 ... -9, -e) earlier are on
-          the command line are completely forgotten. Similarly, when
-          a preset option is specified, all custom filter chain options
-          earlier on the command line are completely forgotten.
-
-          Example 1: "xz -9 --lzma2=preset=5 -e" is equivalent to "xz -e"
-          which is equivalent to "xz -6e". Earlier -e didn't put xz back
-          into preset mode and thus the example command was equivalent
-          to "xz --lzma2=preset=5".
-
-          Example 2: "xz -9e --lzma2=preset=5 -7" is equivalent to
-          "xz -7". Earlier a custom filter chain option didn't make
-          xz forget the -e option so the example was equivalent to
-          "xz -7e".
-
-        - Fixes and improvements to error handling.
-
-        - Various fixes to the man page.
-
-    * xzless: Fixed to work with "less" versions 448 and later.
-
-    * xzgrep: Made -h an alias for --no-filename.
-
-    * Include the previously missing debug/translation.bash which can
-      be useful for translators.
-
-    * Include a build script for Mac OS X. This has been in the Git
-      repository since 2010 but due to a mistake in Makefile.am the
-      script hasn't been included in a release tarball before.
-
-
-5.0.4 (2012-06-22)
-
-    * liblzma:
-
-        - Fix lzma_index_init(). It could crash if memory allocation
-          failed.
-
-        - Fix the possibility of an incorrect LZMA_BUF_ERROR when a BCJ
-          filter is used and the application only provides exactly as
-          much output space as is the uncompressed size of the file.
-
-        - Fix a bug in doc/examples_old/xz_pipe_decompress.c. It didn't
-          check if the last call to lzma_code() really returned
-          LZMA_STREAM_END, which made the program think that truncated
-          files are valid.
-
-        - New example programs in doc/examples (old programs are now in
-          doc/examples_old). These have more comments and more detailed
-          error handling.
-
-    * Fix "xz -lvv foo.xz". It could crash on some corrupted files.
-
-    * Fix output of "xz --robot -lv" and "xz --robot -lvv" which
-      incorrectly printed the filename also in the "foo (x/x)" format.
-
-    * Fix exit status of "xzdiff foo.xz bar.xz".
-
-    * Fix exit status of "xzgrep foo binary_file".
-
-    * Fix portability to EBCDIC systems.
-
-    * Fix a configure issue on AIX with the XL C compiler. See INSTALL
-      for details.
-
-    * Update French, German, Italian, and Polish translations.
-
-
-5.0.3 (2011-05-21)
-
-    * liblzma fixes:
-
-        - A memory leak was fixed.
-
-        - lzma_stream_buffer_encode() no longer creates an empty .xz
-          Block if encoding an empty buffer. Such an empty Block with
-          LZMA2 data would trigger a bug in 5.0.1 and older (see the
-          first bullet point in 5.0.2 notes). When releasing 5.0.2,
-          I thought that no encoder creates this kind of files but
-          I was wrong.
-
-        - Validate function arguments better in a few functions. Most
-          importantly, specifying an unsupported integrity check to
-          lzma_stream_buffer_encode() no longer creates a corrupt .xz
-          file. Probably no application tries to do that, so this
-          shouldn't be a big problem in practice.
-
-        - Document that lzma_block_buffer_encode(),
-          lzma_easy_buffer_encode(), lzma_stream_encoder(), and
-          lzma_stream_buffer_encode() may return LZMA_UNSUPPORTED_CHECK.
-
-        - The return values of the _memusage() functions are now
-          documented better.
-
-    * Fix command name detection in xzgrep. xzegrep and xzfgrep now
-      correctly use egrep and fgrep instead of grep.
-
-    * French translation was added.
-
-
-5.0.2 (2011-04-01)
-
-    * LZMA2 decompressor now correctly accepts LZMA2 streams with no
-      uncompressed data. Previously it considered them corrupt. The
-      bug can affect applications that use raw LZMA2 streams. It is
-      very unlikely to affect .xz files because no compressor creates
-      .xz files with empty LZMA2 streams. (Empty .xz files are a
-      different thing than empty LZMA2 streams.)
-
-    * "xz --suffix=.foo filename.foo" now refuses to compress the
-      file due to it already having the suffix .foo. It was already
-      documented on the man page, but the code lacked the test.
-
-    * "xzgrep -l foo bar.xz" works now.
-
-    * Polish translation was added.
-
-
-5.0.1 (2011-01-29)
-
-    * xz --force now (de)compresses files that have setuid, setgid,
-      or sticky bit set and files that have multiple hard links.
-      The man page had it documented this way already, but the code
-      had a bug.
-
-    * gzip and bzip2 support in xzdiff was fixed.
-
-    * Portability fixes
-
-    * Minor fix to Czech translation
-
-
-5.0.0 (2010-10-23)
-
-    Only the most important changes compared to 4.999.9beta are listed
-    here. One change is especially important:
-
-      * The memory usage limit is now disabled by default. Some scripts
-        written before this change may have used --memory=max on xz command
-        line or in XZ_OPT. THESE USES OF --memory=max SHOULD BE REMOVED
-        NOW, because they interfere with user's ability to set the memory
-        usage limit himself. If user-specified limit causes problems to
-        your script, blame the user.
-
-    Other significant changes:
-
-      * Added support for XZ_DEFAULTS environment variable. This variable
-        allows users to set default options for xz, e.g. default memory
-        usage limit or default compression level. Scripts that use xz
-        must never set or unset XZ_DEFAULTS. Scripts should use XZ_OPT
-        instead if they need a way to pass options to xz via an
-        environment variable.
-
-      * The compression settings associated with the preset levels
-        -0 ... -9 have been changed. --extreme was changed a little too.
-        It is now less likely to make compression worse, but with some
-        files the new --extreme may compress slightly worse than the old
-        --extreme.
-
-      * If a preset level (-0 ... -9) is specified after a custom filter
-        chain options have been used (e.g. --lzma2), the custom filter
-        chain will be forgotten. Earlier the preset options were
-        completely ignored after custom filter chain options had been
-        seen.
-
-      * xz will create sparse files when decompressing if the uncompressed
-        data contains long sequences of binary zeros. This is done even
-        when writing to standard output that is connected to a regular
-        file and certain additional conditions are met to make it safe.
-
-      * Support for "xz --list" was added. Combine with --verbose or
-        --verbose --verbose (-vv) for detailed output.
-
-      * I had hoped that liblzma API would have been stable after
-        4.999.9beta, but there have been a couple of changes in the
-        advanced features, which don't affect most applications:
-
-          - Index handling code was revised. If you were using the old
-            API, you will get a compiler error (so it's easy to notice).
-
-          - A subtle but important change was made to the Block handling
-            API. lzma_block.version has to be initialized even for
-            lzma_block_header_decode(). Code that doesn't do it will work
-            for now, but might break in the future, which makes this API
-            change easy to miss.
-
-      * The major soname has been bumped to 5.0.0. liblzma API and ABI
-        are now stable, so the need to recompile programs linking against
-        liblzma shouldn't arise soon.
-