node-liblzma 1.0.4 → 1.1.6

package/deps/xz/include/lzma/bcj.h

@@ -1,90 +0,0 @@
-/**
- * \file        lzma/bcj.h
- * \brief       Branch/Call/Jump conversion filters
- */
-
-/*
- * Author: Lasse Collin
- *
- * This file has been put into the public domain.
- * You can do whatever you want with this file.
- *
- * See ../lzma.h for information about liblzma as a whole.
- */
-
-#ifndef LZMA_H_INTERNAL
-#	error Never include this file directly. Use <lzma.h> instead.
-#endif
-
-
-/* Filter IDs for lzma_filter.id */
-
-#define LZMA_FILTER_X86         LZMA_VLI_C(0x04)
-	/**<
-	 * Filter for x86 binaries
-	 */
-
-#define LZMA_FILTER_POWERPC     LZMA_VLI_C(0x05)
-	/**<
-	 * Filter for Big endian PowerPC binaries
-	 */
-
-#define LZMA_FILTER_IA64        LZMA_VLI_C(0x06)
-	/**<
-	 * Filter for IA-64 (Itanium) binaries.
-	 */
-
-#define LZMA_FILTER_ARM         LZMA_VLI_C(0x07)
-	/**<
-	 * Filter for ARM binaries.
-	 */
-
-#define LZMA_FILTER_ARMTHUMB    LZMA_VLI_C(0x08)
-	/**<
-	 * Filter for ARM-Thumb binaries.
-	 */
-
-#define LZMA_FILTER_SPARC       LZMA_VLI_C(0x09)
-	/**<
-	 * Filter for SPARC binaries.
-	 */
-
-
-/**
- * \brief       Options for BCJ filters
- *
- * The BCJ filters never change the size of the data. Specifying options
- * for them is optional: if pointer to options is NULL, default value is
- * used. You probably never need to specify options to BCJ filters, so just
- * set the options pointer to NULL and be happy.
- *
- * If options with non-default values have been specified when encoding,
- * the same options must also be specified when decoding.
- *
- * \note        At the moment, none of the BCJ filters support
- *              LZMA_SYNC_FLUSH. If LZMA_SYNC_FLUSH is specified,
- *              LZMA_OPTIONS_ERROR will be returned. If there is need,
- *              partial support for LZMA_SYNC_FLUSH can be added in future.
- *              Partial means that flushing would be possible only at
- *              offsets that are multiple of 2, 4, or 16 depending on
- *              the filter, except x86 which cannot be made to support
- *              LZMA_SYNC_FLUSH predictably.
- */
-typedef struct {
-	/**
-	 * \brief       Start offset for conversions
-	 *
-	 * This setting is useful only when the same filter is used
-	 * _separately_ for multiple sections of the same executable file,
-	 * and the sections contain cross-section branch/call/jump
-	 * instructions. In that case it is beneficial to set the start
-	 * offset of the non-first sections so that the relative addresses
-	 * of the cross-section branch/call/jump instructions will use the
-	 * same absolute addresses as in the first section.
-	 *
-	 * When the pointer to options is NULL, the default value (zero)
-	 * is used.
-	 */
-	uint32_t start_offset;
-
-} lzma_options_bcj;

package/deps/xz/include/lzma/block.h

@@ -1,581 +0,0 @@
-/**
- * \file        lzma/block.h
- * \brief       .xz Block handling
- */
-
-/*
- * Author: Lasse Collin
- *
- * This file has been put into the public domain.
- * You can do whatever you want with this file.
- *
- * See ../lzma.h for information about liblzma as a whole.
- */
-
-#ifndef LZMA_H_INTERNAL
-#	error Never include this file directly. Use <lzma.h> instead.
-#endif
-
-
-/**
- * \brief       Options for the Block and Block Header encoders and decoders
- *
- * Different Block handling functions use different parts of this structure.
- * Some read some members, other functions write, and some do both. Only the
- * members listed for reading need to be initialized when the specified
- * functions are called. The members marked for writing will be assigned
- * new values at some point either by calling the given function or by
- * later calls to lzma_code().
- */
-typedef struct {
-	/**
-	 * \brief       Block format version
-	 *
-	 * To prevent API and ABI breakages when new features are needed,
-	 * a version number is used to indicate which fields in this
-	 * structure are in use:
-	 *   - liblzma >= 5.0.0: version = 0 is supported.
-	 *   - liblzma >= 5.1.4beta: Support for version = 1 was added,
-	 *     which adds the ignore_check field.
-	 *
-	 * If version is greater than one, most Block related functions
-	 * will return LZMA_OPTIONS_ERROR (lzma_block_header_decode() works
-	 * with any version value).
-	 *
-	 * Read by:
-	 *  - All functions that take pointer to lzma_block as argument,
-	 *    including lzma_block_header_decode().
-	 *
-	 * Written by:
-	 *  - lzma_block_header_decode()
-	 */
-	uint32_t version;
-
-	/**
-	 * \brief       Size of the Block Header field
-	 *
-	 * This is always a multiple of four.
-	 *
-	 * Read by:
-	 *  - lzma_block_header_encode()
-	 *  - lzma_block_header_decode()
-	 *  - lzma_block_compressed_size()
-	 *  - lzma_block_unpadded_size()
-	 *  - lzma_block_total_size()
-	 *  - lzma_block_decoder()
-	 *  - lzma_block_buffer_decode()
-	 *
-	 * Written by:
-	 *  - lzma_block_header_size()
-	 *  - lzma_block_buffer_encode()
-	 */
-	uint32_t header_size;
-#	define LZMA_BLOCK_HEADER_SIZE_MIN 8
-#	define LZMA_BLOCK_HEADER_SIZE_MAX 1024
-
-	/**
-	 * \brief       Type of integrity Check
-	 *
-	 * The Check ID is not stored into the Block Header, thus its value
-	 * must be provided also when decoding.
-	 *
-	 * Read by:
-	 *  - lzma_block_header_encode()
-	 *  - lzma_block_header_decode()
-	 *  - lzma_block_compressed_size()
-	 *  - lzma_block_unpadded_size()
-	 *  - lzma_block_total_size()
-	 *  - lzma_block_encoder()
-	 *  - lzma_block_decoder()
-	 *  - lzma_block_buffer_encode()
-	 *  - lzma_block_buffer_decode()
-	 */
-	lzma_check check;
-
-	/**
-	 * \brief       Size of the Compressed Data in bytes
-	 *
-	 * Encoding: If this is not LZMA_VLI_UNKNOWN, Block Header encoder
-	 * will store this value to the Block Header. Block encoder doesn't
-	 * care about this value, but will set it once the encoding has been
-	 * finished.
-	 *
-	 * Decoding: If this is not LZMA_VLI_UNKNOWN, Block decoder will
-	 * verify that the size of the Compressed Data field matches
-	 * compressed_size.
-	 *
-	 * Usually you don't know this value when encoding in streamed mode,
-	 * and thus cannot write this field into the Block Header.
-	 *
-	 * In non-streamed mode you can reserve space for this field before
-	 * encoding the actual Block. After encoding the data, finish the
-	 * Block by encoding the Block Header. Steps in detail:
-	 *
-	 *  - Set compressed_size to some big enough value. If you don't know
-	 *    better, use LZMA_VLI_MAX, but remember that bigger values take
-	 *    more space in Block Header.
-	 *
-	 *  - Call lzma_block_header_size() to see how much space you need to
-	 *    reserve for the Block Header.
-	 *
-	 *  - Encode the Block using lzma_block_encoder() and lzma_code().
-	 *    It sets compressed_size to the correct value.
-	 *
-	 *  - Use lzma_block_header_encode() to encode the Block Header.
-	 *    Because space was reserved in the first step, you don't need
-	 *    to call lzma_block_header_size() anymore, because due to
-	 *    reserving, header_size has to be big enough. If it is "too big",
-	 *    lzma_block_header_encode() will add enough Header Padding to
-	 *    make Block Header to match the size specified by header_size.
-	 *
-	 * Read by:
-	 *  - lzma_block_header_size()
-	 *  - lzma_block_header_encode()
-	 *  - lzma_block_compressed_size()
-	 *  - lzma_block_unpadded_size()
-	 *  - lzma_block_total_size()
-	 *  - lzma_block_decoder()
-	 *  - lzma_block_buffer_decode()
-	 *
-	 * Written by:
-	 *  - lzma_block_header_decode()
-	 *  - lzma_block_compressed_size()
-	 *  - lzma_block_encoder()
-	 *  - lzma_block_decoder()
-	 *  - lzma_block_buffer_encode()
-	 *  - lzma_block_buffer_decode()
-	 */
-	lzma_vli compressed_size;
-
-	/**
-	 * \brief       Uncompressed Size in bytes
-	 *
-	 * This is handled very similarly to compressed_size above.
-	 *
-	 * uncompressed_size is needed by fewer functions than
-	 * compressed_size. This is because uncompressed_size isn't
-	 * needed to validate that Block stays within proper limits.
-	 *
-	 * Read by:
-	 *  - lzma_block_header_size()
-	 *  - lzma_block_header_encode()
-	 *  - lzma_block_decoder()
-	 *  - lzma_block_buffer_decode()
-	 *
-	 * Written by:
-	 *  - lzma_block_header_decode()
-	 *  - lzma_block_encoder()
-	 *  - lzma_block_decoder()
-	 *  - lzma_block_buffer_encode()
-	 *  - lzma_block_buffer_decode()
-	 */
-	lzma_vli uncompressed_size;
-
-	/**
-	 * \brief       Array of filters
-	 *
-	 * There can be 1-4 filters. The end of the array is marked with
-	 * .id = LZMA_VLI_UNKNOWN.
-	 *
-	 * Read by:
-	 *  - lzma_block_header_size()
-	 *  - lzma_block_header_encode()
-	 *  - lzma_block_encoder()
-	 *  - lzma_block_decoder()
-	 *  - lzma_block_buffer_encode()
-	 *  - lzma_block_buffer_decode()
-	 *
-	 * Written by:
-	 *  - lzma_block_header_decode(): Note that this does NOT free()
-	 *    the old filter options structures. All unused filters[] will
-	 *    have .id == LZMA_VLI_UNKNOWN and .options == NULL. If
-	 *    decoding fails, all filters[] are guaranteed to be
-	 *    LZMA_VLI_UNKNOWN and NULL.
-	 *
-	 * \note        Because of the array is terminated with
-	 *              .id = LZMA_VLI_UNKNOWN, the actual array must
-	 *              have LZMA_FILTERS_MAX + 1 members or the Block
-	 *              Header decoder will overflow the buffer.
-	 */
-	lzma_filter *filters;
-
-	/**
-	 * \brief       Raw value stored in the Check field
-	 *
-	 * After successful coding, the first lzma_check_size(check) bytes
-	 * of this array contain the raw value stored in the Check field.
-	 *
-	 * Note that CRC32 and CRC64 are stored in little endian byte order.
-	 * Take it into account if you display the Check values to the user.
-	 *
-	 * Written by:
-	 *  - lzma_block_encoder()
-	 *  - lzma_block_decoder()
-	 *  - lzma_block_buffer_encode()
-	 *  - lzma_block_buffer_decode()
-	 */
-	uint8_t raw_check[LZMA_CHECK_SIZE_MAX];
-
-	/*
-	 * Reserved space to allow possible future extensions without
-	 * breaking the ABI. You should not touch these, because the names
-	 * of these variables may change. These are and will never be used
-	 * with the currently supported options, so it is safe to leave these
-	 * uninitialized.
-	 */
-	void *reserved_ptr1;
-	void *reserved_ptr2;
-	void *reserved_ptr3;
-	uint32_t reserved_int1;
-	uint32_t reserved_int2;
-	lzma_vli reserved_int3;
-	lzma_vli reserved_int4;
-	lzma_vli reserved_int5;
-	lzma_vli reserved_int6;
-	lzma_vli reserved_int7;
-	lzma_vli reserved_int8;
-	lzma_reserved_enum reserved_enum1;
-	lzma_reserved_enum reserved_enum2;
-	lzma_reserved_enum reserved_enum3;
-	lzma_reserved_enum reserved_enum4;
-
-	/**
-	 * \brief       A flag to Block decoder to not verify the Check field
-	 *
-	 * This field is supported by liblzma >= 5.1.4beta if .version >= 1.
-	 *
-	 * If this is set to true, the integrity check won't be calculated
-	 * and verified. Unless you know what you are doing, you should
-	 * leave this to false. (A reason to set this to true is when the
-	 * file integrity is verified externally anyway and you want to
-	 * speed up the decompression, which matters mostly when using
-	 * SHA-256 as the integrity check.)
-	 *
-	 * If .version >= 1, read by:
-	 *   - lzma_block_decoder()
-	 *   - lzma_block_buffer_decode()
-	 *
-	 * Written by (.version is ignored):
-	 *   - lzma_block_header_decode() always sets this to false
-	 */
-	lzma_bool ignore_check;
-
-	lzma_bool reserved_bool2;
-	lzma_bool reserved_bool3;
-	lzma_bool reserved_bool4;
-	lzma_bool reserved_bool5;
-	lzma_bool reserved_bool6;
-	lzma_bool reserved_bool7;
-	lzma_bool reserved_bool8;
-
-} lzma_block;
-
-
-/**
- * \brief       Decode the Block Header Size field
- *
- * To decode Block Header using lzma_block_header_decode(), the size of the
- * Block Header has to be known and stored into lzma_block.header_size.
- * The size can be calculated from the first byte of a Block using this macro.
- * Note that if the first byte is 0x00, it indicates beginning of Index; use
- * this macro only when the byte is not 0x00.
- *
- * There is no encoding macro, because Block Header encoder is enough for that.
- */
-#define lzma_block_header_size_decode(b) (((uint32_t)(b) + 1) * 4)
-
-
-/**
- * \brief       Calculate Block Header Size
- *
- * Calculate the minimum size needed for the Block Header field using the
- * settings specified in the lzma_block structure. Note that it is OK to
- * increase the calculated header_size value as long as it is a multiple of
- * four and doesn't exceed LZMA_BLOCK_HEADER_SIZE_MAX. Increasing header_size
- * just means that lzma_block_header_encode() will add Header Padding.
- *
- * \return      - LZMA_OK: Size calculated successfully and stored to
- *                block->header_size.
- *              - LZMA_OPTIONS_ERROR: Unsupported version, filters or
- *                filter options.
- *              - LZMA_PROG_ERROR: Invalid values like compressed_size == 0.
- *
- * \note        This doesn't check that all the options are valid i.e. this
- *              may return LZMA_OK even if lzma_block_header_encode() or
- *              lzma_block_encoder() would fail. If you want to validate the
- *              filter chain, consider using lzma_memlimit_encoder() which as
- *              a side-effect validates the filter chain.
- */
-extern LZMA_API(lzma_ret) lzma_block_header_size(lzma_block *block)
-		lzma_nothrow lzma_attr_warn_unused_result;
-
-
-/**
- * \brief       Encode Block Header
- *
- * The caller must have calculated the size of the Block Header already with
- * lzma_block_header_size(). If a value larger than the one calculated by
- * lzma_block_header_size() is used, the Block Header will be padded to the
- * specified size.
- *
- * \param       out         Beginning of the output buffer. This must be
- *                          at least block->header_size bytes.
- * \param       block       Block options to be encoded.
- *
- * \return      - LZMA_OK: Encoding was successful. block->header_size
- *                bytes were written to output buffer.
- *              - LZMA_OPTIONS_ERROR: Invalid or unsupported options.
- *              - LZMA_PROG_ERROR: Invalid arguments, for example
- *                block->header_size is invalid or block->filters is NULL.
- */
-extern LZMA_API(lzma_ret) lzma_block_header_encode(
-		const lzma_block *block, uint8_t *out)
-		lzma_nothrow lzma_attr_warn_unused_result;
-
-
-/**
- * \brief       Decode Block Header
- *
- * block->version should (usually) be set to the highest value supported
- * by the application. If the application sets block->version to a value
- * higher than supported by the current liblzma version, this function will
- * downgrade block->version to the highest value supported by it. Thus one
- * should check the value of block->version after calling this function if
- * block->version was set to a non-zero value and the application doesn't
- * otherwise know that the liblzma version being used is new enough to
- * support the specified block->version.
- *
- * The size of the Block Header must have already been decoded with
- * lzma_block_header_size_decode() macro and stored to block->header_size.
- *
- * The integrity check type from Stream Header must have been stored
- * to block->check.
- *
- * block->filters must have been allocated, but they don't need to be
- * initialized (possible existing filter options are not freed).
- *
- * \param       block       Destination for Block options.
- * \param       allocator   lzma_allocator for custom allocator functions.
- *                          Set to NULL to use malloc() (and also free()
- *                          if an error occurs).
- * \param       in          Beginning of the input buffer. This must be
- *                          at least block->header_size bytes.
- *
- * \return      - LZMA_OK: Decoding was successful. block->header_size
- *                bytes were read from the input buffer.
- *              - LZMA_OPTIONS_ERROR: The Block Header specifies some
- *                unsupported options such as unsupported filters. This can
- *                happen also if block->version was set to a too low value
- *                compared to what would be required to properly represent
- *                the information stored in the Block Header.
- *              - LZMA_DATA_ERROR: Block Header is corrupt, for example,
- *                the CRC32 doesn't match.
- *              - LZMA_PROG_ERROR: Invalid arguments, for example
- *                block->header_size is invalid or block->filters is NULL.
- */
-extern LZMA_API(lzma_ret) lzma_block_header_decode(lzma_block *block,
-		const lzma_allocator *allocator, const uint8_t *in)
-		lzma_nothrow lzma_attr_warn_unused_result;
-
-
-/**
- * \brief       Validate and set Compressed Size according to Unpadded Size
- *
- * Block Header stores Compressed Size, but Index has Unpadded Size. If the
- * application has already parsed the Index and is now decoding Blocks,
- * it can calculate Compressed Size from Unpadded Size. This function does
- * exactly that with error checking:
- *
- *  - Compressed Size calculated from Unpadded Size must be positive integer,
- *    that is, Unpadded Size must be big enough that after Block Header and
- *    Check fields there's still at least one byte for Compressed Size.
- *
- *  - If Compressed Size was present in Block Header, the new value
- *    calculated from Unpadded Size is compared against the value
- *    from Block Header.
- *
- * \note        This function must be called _after_ decoding the Block Header
- *              field so that it can properly validate Compressed Size if it
- *              was present in Block Header.
- *
- * \return      - LZMA_OK: block->compressed_size was set successfully.
- *              - LZMA_DATA_ERROR: unpadded_size is too small compared to
- *                block->header_size and lzma_check_size(block->check).
- *              - LZMA_PROG_ERROR: Some values are invalid. For example,
- *                block->header_size must be a multiple of four and
- *                between 8 and 1024 inclusive.
- */
-extern LZMA_API(lzma_ret) lzma_block_compressed_size(
-		lzma_block *block, lzma_vli unpadded_size)
-		lzma_nothrow lzma_attr_warn_unused_result;
-
-
-/**
- * \brief       Calculate Unpadded Size
- *
- * The Index field stores Unpadded Size and Uncompressed Size. The latter
- * can be taken directly from the lzma_block structure after coding a Block,
- * but Unpadded Size needs to be calculated from Block Header Size,
- * Compressed Size, and size of the Check field. This is where this function
- * is needed.
- *
- * \return      Unpadded Size on success, or zero on error.
- */
-extern LZMA_API(lzma_vli) lzma_block_unpadded_size(const lzma_block *block)
-		lzma_nothrow lzma_attr_pure;
-
-
-/**
- * \brief       Calculate the total encoded size of a Block
- *
- * This is equivalent to lzma_block_unpadded_size() except that the returned
- * value includes the size of the Block Padding field.
- *
- * \return      On success, total encoded size of the Block. On error,
- *              zero is returned.
- */
-extern LZMA_API(lzma_vli) lzma_block_total_size(const lzma_block *block)
-		lzma_nothrow lzma_attr_pure;
-
-
-/**
- * \brief       Initialize .xz Block encoder
- *
- * Valid actions for lzma_code() are LZMA_RUN, LZMA_SYNC_FLUSH (only if the
- * filter chain supports it), and LZMA_FINISH.
- *
- * \return      - LZMA_OK: All good, continue with lzma_code().
- *              - LZMA_MEM_ERROR
- *              - LZMA_OPTIONS_ERROR
- *              - LZMA_UNSUPPORTED_CHECK: block->check specifies a Check ID
- *                that is not supported by this buid of liblzma. Initializing
- *                the encoder failed.
- *              - LZMA_PROG_ERROR
- */
-extern LZMA_API(lzma_ret) lzma_block_encoder(
-		lzma_stream *strm, lzma_block *block)
-		lzma_nothrow lzma_attr_warn_unused_result;
-
-
-/**
- * \brief       Initialize .xz Block decoder
- *
- * Valid actions for lzma_code() are LZMA_RUN and LZMA_FINISH. Using
- * LZMA_FINISH is not required. It is supported only for convenience.
- *
- * \return      - LZMA_OK: All good, continue with lzma_code().
- *              - LZMA_UNSUPPORTED_CHECK: Initialization was successful, but
- *                the given Check ID is not supported, thus Check will be
- *                ignored.
- *              - LZMA_PROG_ERROR
- *              - LZMA_MEM_ERROR
- */
-extern LZMA_API(lzma_ret) lzma_block_decoder(
-		lzma_stream *strm, lzma_block *block)
-		lzma_nothrow lzma_attr_warn_unused_result;
-
-
-/**
- * \brief       Calculate maximum output size for single-call Block encoding
- *
- * This is equivalent to lzma_stream_buffer_bound() but for .xz Blocks.
- * See the documentation of lzma_stream_buffer_bound().
- */
-extern LZMA_API(size_t) lzma_block_buffer_bound(size_t uncompressed_size)
-		lzma_nothrow;
-
-
-/**
- * \brief       Single-call .xz Block encoder
- *
- * In contrast to the multi-call encoder initialized with
- * lzma_block_encoder(), this function encodes also the Block Header. This
- * is required to make it possible to write appropriate Block Header also
- * in case the data isn't compressible, and different filter chain has to be
- * used to encode the data in uncompressed form using uncompressed chunks
- * of the LZMA2 filter.
- *
- * When the data isn't compressible, header_size, compressed_size, and
- * uncompressed_size are set just like when the data was compressible, but
- * it is possible that header_size is too small to hold the filter chain
- * specified in block->filters, because that isn't necessarily the filter
- * chain that was actually used to encode the data. lzma_block_unpadded_size()
- * still works normally, because it doesn't read the filters array.
- *
- * \param       block       Block options: block->version, block->check,
- *                          and block->filters must have been initialized.
- * \param       allocator   lzma_allocator for custom allocator functions.
- *                          Set to NULL to use malloc() and free().
- * \param       in          Beginning of the input buffer
- * \param       in_size     Size of the input buffer
- * \param       out         Beginning of the output buffer
- * \param       out_pos     The next byte will be written to out[*out_pos].
- *                          *out_pos is updated only if encoding succeeds.
- * \param       out_size    Size of the out buffer; the first byte into
- *                          which no data is written to is out[out_size].
- *
- * \return      - LZMA_OK: Encoding was successful.
- *              - LZMA_BUF_ERROR: Not enough output buffer space.
- *              - LZMA_UNSUPPORTED_CHECK
- *              - LZMA_OPTIONS_ERROR
- *              - LZMA_MEM_ERROR
- *              - LZMA_DATA_ERROR
- *              - LZMA_PROG_ERROR
- */
-extern LZMA_API(lzma_ret) lzma_block_buffer_encode(
-		lzma_block *block, const lzma_allocator *allocator,
-		const uint8_t *in, size_t in_size,
-		uint8_t *out, size_t *out_pos, size_t out_size)
-		lzma_nothrow lzma_attr_warn_unused_result;
-
-
-/**
- * \brief       Single-call uncompressed .xz Block encoder
- *
- * This is like lzma_block_buffer_encode() except this doesn't try to
- * compress the data and instead encodes the data using LZMA2 uncompressed
- * chunks. The required output buffer size can be determined with
- * lzma_block_buffer_bound().
- *
- * Since the data won't be compressed, this function ignores block->filters.
- * This function doesn't take lzma_allocator because this function doesn't
- * allocate any memory from the heap.
- */
-extern LZMA_API(lzma_ret) lzma_block_uncomp_encode(lzma_block *block,
-		const uint8_t *in, size_t in_size,
-		uint8_t *out, size_t *out_pos, size_t out_size)
-		lzma_nothrow lzma_attr_warn_unused_result;
-
-
-/**
- * \brief       Single-call .xz Block decoder
- *
- * This is single-call equivalent of lzma_block_decoder(), and requires that
- * the caller has already decoded Block Header and checked its memory usage.
- *
- * \param       block       Block options just like with lzma_block_decoder().
- * \param       allocator   lzma_allocator for custom allocator functions.
- *                          Set to NULL to use malloc() and free().
- * \param       in          Beginning of the input buffer
- * \param       in_pos      The next byte will be read from in[*in_pos].
- *                          *in_pos is updated only if decoding succeeds.
- * \param       in_size     Size of the input buffer; the first byte that
- *                          won't be read is in[in_size].
- * \param       out         Beginning of the output buffer
- * \param       out_pos     The next byte will be written to out[*out_pos].
- *                          *out_pos is updated only if encoding succeeds.
- * \param       out_size    Size of the out buffer; the first byte into
- *                          which no data is written to is out[out_size].
- *
- * \return      - LZMA_OK: Decoding was successful.
- *              - LZMA_OPTIONS_ERROR
- *              - LZMA_DATA_ERROR
- *              - LZMA_MEM_ERROR
- *              - LZMA_BUF_ERROR: Output buffer was too small.
- *              - LZMA_PROG_ERROR
- */
-extern LZMA_API(lzma_ret) lzma_block_buffer_decode(
-		lzma_block *block, const lzma_allocator *allocator,
-		const uint8_t *in, size_t *in_pos, size_t in_size,
-		uint8_t *out, size_t *out_pos, size_t out_size)
-		lzma_nothrow;