node-liblzma 1.0.4 → 1.1.6

package/deps/xz/src/liblzma/api/lzma/index_hash.h

@@ -1,107 +0,0 @@
-/**
- * \file        lzma/index_hash.h
- * \brief       Validate Index by using a hash function
- *
- * Hashing makes it possible to use constant amount of memory to validate
- * Index of arbitrary size.
- */
-
-/*
- * Author: Lasse Collin
- *
- * This file has been put into the public domain.
- * You can do whatever you want with this file.
- *
- * See ../lzma.h for information about liblzma as a whole.
- */
-
-#ifndef LZMA_H_INTERNAL
-#	error Never include this file directly. Use <lzma.h> instead.
-#endif
-
-/**
- * \brief       Opaque data type to hold the Index hash
- */
-typedef struct lzma_index_hash_s lzma_index_hash;
-
-
-/**
- * \brief       Allocate and initialize a new lzma_index_hash structure
- *
- * If index_hash is NULL, a new lzma_index_hash structure is allocated,
- * initialized, and a pointer to it returned. If allocation fails, NULL
- * is returned.
- *
- * If index_hash is non-NULL, it is reinitialized and the same pointer
- * returned. In this case, return value cannot be NULL or a different
- * pointer than the index_hash that was given as an argument.
- */
-extern LZMA_API(lzma_index_hash *) lzma_index_hash_init(
-		lzma_index_hash *index_hash, const lzma_allocator *allocator)
-		lzma_nothrow lzma_attr_warn_unused_result;
-
-
-/**
- * \brief       Deallocate lzma_index_hash structure
- */
-extern LZMA_API(void) lzma_index_hash_end(
-		lzma_index_hash *index_hash, const lzma_allocator *allocator)
-		lzma_nothrow;
-
-
-/**
- * \brief       Add a new Record to an Index hash
- *
- * \param       index             Pointer to a lzma_index_hash structure
- * \param       unpadded_size     Unpadded Size of a Block
- * \param       uncompressed_size Uncompressed Size of a Block
- *
- * \return      - LZMA_OK
- *              - LZMA_DATA_ERROR: Compressed or uncompressed size of the
- *                Stream or size of the Index field would grow too big.
- *              - LZMA_PROG_ERROR: Invalid arguments or this function is being
- *                used when lzma_index_hash_decode() has already been used.
- */
-extern LZMA_API(lzma_ret) lzma_index_hash_append(lzma_index_hash *index_hash,
-		lzma_vli unpadded_size, lzma_vli uncompressed_size)
-		lzma_nothrow lzma_attr_warn_unused_result;
-
-
-/**
- * \brief       Decode and validate the Index field
- *
- * After telling the sizes of all Blocks with lzma_index_hash_append(),
- * the actual Index field is decoded with this function. Specifically,
- * once decoding of the Index field has been started, no more Records
- * can be added using lzma_index_hash_append().
- *
- * This function doesn't use lzma_stream structure to pass the input data.
- * Instead, the input buffer is specified using three arguments. This is
- * because it matches better the internal APIs of liblzma.
- *
- * \param       index_hash      Pointer to a lzma_index_hash structure
- * \param       in              Pointer to the beginning of the input buffer
- * \param       in_pos          in[*in_pos] is the next byte to process
- * \param       in_size         in[in_size] is the first byte not to process
- *
- * \return      - LZMA_OK: So far good, but more input is needed.
- *              - LZMA_STREAM_END: Index decoded successfully and it matches
- *                the Records given with lzma_index_hash_append().
- *              - LZMA_DATA_ERROR: Index is corrupt or doesn't match the
- *                information given with lzma_index_hash_append().
- *              - LZMA_BUF_ERROR: Cannot progress because *in_pos >= in_size.
- *              - LZMA_PROG_ERROR
- */
-extern LZMA_API(lzma_ret) lzma_index_hash_decode(lzma_index_hash *index_hash,
-		const uint8_t *in, size_t *in_pos, size_t in_size)
-		lzma_nothrow lzma_attr_warn_unused_result;
-
-
-/**
- * \brief       Get the size of the Index field as bytes
- *
- * This is needed to verify the Backward Size field in the Stream Footer.
- */
-extern LZMA_API(lzma_vli) lzma_index_hash_size(
-		const lzma_index_hash *index_hash)
-		lzma_nothrow lzma_attr_pure;

package/deps/xz/src/liblzma/api/lzma/lzma12.h

@@ -1,420 +0,0 @@
-/**
- * \file        lzma/lzma12.h
- * \brief       LZMA1 and LZMA2 filters
- */
-
-/*
- * Author: Lasse Collin
- *
- * This file has been put into the public domain.
- * You can do whatever you want with this file.
- *
- * See ../lzma.h for information about liblzma as a whole.
- */
-
-#ifndef LZMA_H_INTERNAL
-#	error Never include this file directly. Use <lzma.h> instead.
-#endif
-
-
-/**
- * \brief       LZMA1 Filter ID
- *
- * LZMA1 is the very same thing as what was called just LZMA in LZMA Utils,
- * 7-Zip, and LZMA SDK. It's called LZMA1 here to prevent developers from
- * accidentally using LZMA when they actually want LZMA2.
- *
- * LZMA1 shouldn't be used for new applications unless you _really_ know
- * what you are doing. LZMA2 is almost always a better choice.
- */
-#define LZMA_FILTER_LZMA1       LZMA_VLI_C(0x4000000000000001)
-
-/**
- * \brief       LZMA2 Filter ID
- *
- * Usually you want this instead of LZMA1. Compared to LZMA1, LZMA2 adds
- * support for LZMA_SYNC_FLUSH, uncompressed chunks (smaller expansion
- * when trying to compress uncompressible data), possibility to change
- * lc/lp/pb in the middle of encoding, and some other internal improvements.
- */
-#define LZMA_FILTER_LZMA2       LZMA_VLI_C(0x21)
-
-
-/**
- * \brief       Match finders
- *
- * Match finder has major effect on both speed and compression ratio.
- * Usually hash chains are faster than binary trees.
- *
- * If you will use LZMA_SYNC_FLUSH often, the hash chains may be a better
- * choice, because binary trees get much higher compression ratio penalty
- * with LZMA_SYNC_FLUSH.
- *
- * The memory usage formulas are only rough estimates, which are closest to
- * reality when dict_size is a power of two. The formulas are  more complex
- * in reality, and can also change a little between liblzma versions. Use
- * lzma_raw_encoder_memusage() to get more accurate estimate of memory usage.
- */
-typedef enum {
-	LZMA_MF_HC3     = 0x03,
-		/**<
-		 * \brief       Hash Chain with 2- and 3-byte hashing
-		 *
-		 * Minimum nice_len: 3
-		 *
-		 * Memory usage:
-		 *  - dict_size <= 16 MiB: dict_size * 7.5
-		 *  - dict_size > 16 MiB: dict_size * 5.5 + 64 MiB
-		 */
-
-	LZMA_MF_HC4     = 0x04,
-		/**<
-		 * \brief       Hash Chain with 2-, 3-, and 4-byte hashing
-		 *
-		 * Minimum nice_len: 4
-		 *
-		 * Memory usage:
-		 *  - dict_size <= 32 MiB: dict_size * 7.5
-		 *  - dict_size > 32 MiB: dict_size * 6.5
-		 */
-
-	LZMA_MF_BT2     = 0x12,
-		/**<
-		 * \brief       Binary Tree with 2-byte hashing
-		 *
-		 * Minimum nice_len: 2
-		 *
-		 * Memory usage: dict_size * 9.5
-		 */
-
-	LZMA_MF_BT3     = 0x13,
-		/**<
-		 * \brief       Binary Tree with 2- and 3-byte hashing
-		 *
-		 * Minimum nice_len: 3
-		 *
-		 * Memory usage:
-		 *  - dict_size <= 16 MiB: dict_size * 11.5
-		 *  - dict_size > 16 MiB: dict_size * 9.5 + 64 MiB
-		 */
-
-	LZMA_MF_BT4     = 0x14
-		/**<
-		 * \brief       Binary Tree with 2-, 3-, and 4-byte hashing
-		 *
-		 * Minimum nice_len: 4
-		 *
-		 * Memory usage:
-		 *  - dict_size <= 32 MiB: dict_size * 11.5
-		 *  - dict_size > 32 MiB: dict_size * 10.5
-		 */
-} lzma_match_finder;
-
-
-/**
- * \brief       Test if given match finder is supported
- *
- * Return true if the given match finder is supported by this liblzma build.
- * Otherwise false is returned. It is safe to call this with a value that
- * isn't listed in lzma_match_finder enumeration; the return value will be
- * false.
- *
- * There is no way to list which match finders are available in this
- * particular liblzma version and build. It would be useless, because
- * a new match finder, which the application developer wasn't aware,
- * could require giving additional options to the encoder that the older
- * match finders don't need.
- */
-extern LZMA_API(lzma_bool) lzma_mf_is_supported(lzma_match_finder match_finder)
-		lzma_nothrow lzma_attr_const;
-
-
-/**
- * \brief       Compression modes
- *
- * This selects the function used to analyze the data produced by the match
- * finder.
- */
-typedef enum {
-	LZMA_MODE_FAST = 1,
-		/**<
-		 * \brief       Fast compression
-		 *
-		 * Fast mode is usually at its best when combined with
-		 * a hash chain match finder.
-		 */
-
-	LZMA_MODE_NORMAL = 2
-		/**<
-		 * \brief       Normal compression
-		 *
-		 * This is usually notably slower than fast mode. Use this
-		 * together with binary tree match finders to expose the
-		 * full potential of the LZMA1 or LZMA2 encoder.
-		 */
-} lzma_mode;
-
-
-/**
- * \brief       Test if given compression mode is supported
- *
- * Return true if the given compression mode is supported by this liblzma
- * build. Otherwise false is returned. It is safe to call this with a value
- * that isn't listed in lzma_mode enumeration; the return value will be false.
- *
- * There is no way to list which modes are available in this particular
- * liblzma version and build. It would be useless, because a new compression
- * mode, which the application developer wasn't aware, could require giving
- * additional options to the encoder that the older modes don't need.
- */
-extern LZMA_API(lzma_bool) lzma_mode_is_supported(lzma_mode mode)
-		lzma_nothrow lzma_attr_const;
-
-
-/**
- * \brief       Options specific to the LZMA1 and LZMA2 filters
- *
- * Since LZMA1 and LZMA2 share most of the code, it's simplest to share
- * the options structure too. For encoding, all but the reserved variables
- * need to be initialized unless specifically mentioned otherwise.
- * lzma_lzma_preset() can be used to get a good starting point.
- *
- * For raw decoding, both LZMA1 and LZMA2 need dict_size, preset_dict, and
- * preset_dict_size (if preset_dict != NULL). LZMA1 needs also lc, lp, and pb.
- */
-typedef struct {
-	/**
-	 * \brief       Dictionary size in bytes
-	 *
-	 * Dictionary size indicates how many bytes of the recently processed
-	 * uncompressed data is kept in memory. One method to reduce size of
-	 * the uncompressed data is to store distance-length pairs, which
-	 * indicate what data to repeat from the dictionary buffer. Thus,
-	 * the bigger the dictionary, the better the compression ratio
-	 * usually is.
-	 *
-	 * Maximum size of the dictionary depends on multiple things:
-	 *  - Memory usage limit
-	 *  - Available address space (not a problem on 64-bit systems)
-	 *  - Selected match finder (encoder only)
-	 *
-	 * Currently the maximum dictionary size for encoding is 1.5 GiB
-	 * (i.e. (UINT32_C(1) << 30) + (UINT32_C(1) << 29)) even on 64-bit
-	 * systems for certain match finder implementation reasons. In the
-	 * future, there may be match finders that support bigger
-	 * dictionaries.
-	 *
-	 * Decoder already supports dictionaries up to 4 GiB - 1 B (i.e.
-	 * UINT32_MAX), so increasing the maximum dictionary size of the
-	 * encoder won't cause problems for old decoders.
-	 *
-	 * Because extremely small dictionaries sizes would have unneeded
-	 * overhead in the decoder, the minimum dictionary size is 4096 bytes.
-	 *
-	 * \note        When decoding, too big dictionary does no other harm
-	 *              than wasting memory.
-	 */
-	uint32_t dict_size;
-#	define LZMA_DICT_SIZE_MIN       UINT32_C(4096)
-#	define LZMA_DICT_SIZE_DEFAULT   (UINT32_C(1) << 23)
-
-	/**
-	 * \brief       Pointer to an initial dictionary
-	 *
-	 * It is possible to initialize the LZ77 history window using
-	 * a preset dictionary. It is useful when compressing many
-	 * similar, relatively small chunks of data independently from
-	 * each other. The preset dictionary should contain typical
-	 * strings that occur in the files being compressed. The most
-	 * probable strings should be near the end of the preset dictionary.
-	 *
-	 * This feature should be used only in special situations. For
-	 * now, it works correctly only with raw encoding and decoding.
-	 * Currently none of the container formats supported by
-	 * liblzma allow preset dictionary when decoding, thus if
-	 * you create a .xz or .lzma file with preset dictionary, it
-	 * cannot be decoded with the regular decoder functions. In the
-	 * future, the .xz format will likely get support for preset
-	 * dictionary though.
-	 */
-	const uint8_t *preset_dict;
-
-	/**
-	 * \brief       Size of the preset dictionary
-	 *
-	 * Specifies the size of the preset dictionary. If the size is
-	 * bigger than dict_size, only the last dict_size bytes are
-	 * processed.
-	 *
-	 * This variable is read only when preset_dict is not NULL.
-	 * If preset_dict is not NULL but preset_dict_size is zero,
-	 * no preset dictionary is used (identical to only setting
-	 * preset_dict to NULL).
-	 */
-	uint32_t preset_dict_size;
-
-	/**
-	 * \brief       Number of literal context bits
-	 *
-	 * How many of the highest bits of the previous uncompressed
-	 * eight-bit byte (also known as `literal') are taken into
-	 * account when predicting the bits of the next literal.
-	 *
-	 * E.g. in typical English text, an upper-case letter is
-	 * often followed by a lower-case letter, and a lower-case
-	 * letter is usually followed by another lower-case letter.
-	 * In the US-ASCII character set, the highest three bits are 010
-	 * for upper-case letters and 011 for lower-case letters.
-	 * When lc is at least 3, the literal coding can take advantage of
-	 * this property in the uncompressed data.
-	 *
-	 * There is a limit that applies to literal context bits and literal
-	 * position bits together: lc + lp <= 4. Without this limit the
-	 * decoding could become very slow, which could have security related
-	 * results in some cases like email servers doing virus scanning.
-	 * This limit also simplifies the internal implementation in liblzma.
-	 *
-	 * There may be LZMA1 streams that have lc + lp > 4 (maximum possible
-	 * lc would be 8). It is not possible to decode such streams with
-	 * liblzma.
-	 */
-	uint32_t lc;
-#	define LZMA_LCLP_MIN    0
-#	define LZMA_LCLP_MAX    4
-#	define LZMA_LC_DEFAULT  3
-
-	/**
-	 * \brief       Number of literal position bits
-	 *
-	 * lp affects what kind of alignment in the uncompressed data is
-	 * assumed when encoding literals. A literal is a single 8-bit byte.
-	 * See pb below for more information about alignment.
-	 */
-	uint32_t lp;
-#	define LZMA_LP_DEFAULT  0
-
-	/**
-	 * \brief       Number of position bits
-	 *
-	 * pb affects what kind of alignment in the uncompressed data is
-	 * assumed in general. The default means four-byte alignment
-	 * (2^ pb =2^2=4), which is often a good choice when there's
-	 * no better guess.
-	 *
-	 * When the aligment is known, setting pb accordingly may reduce
-	 * the file size a little. E.g. with text files having one-byte
-	 * alignment (US-ASCII, ISO-8859-*, UTF-8), setting pb=0 can
-	 * improve compression slightly. For UTF-16 text, pb=1 is a good
-	 * choice. If the alignment is an odd number like 3 bytes, pb=0
-	 * might be the best choice.
-	 *
-	 * Even though the assumed alignment can be adjusted with pb and
-	 * lp, LZMA1 and LZMA2 still slightly favor 16-byte alignment.
-	 * It might be worth taking into account when designing file formats
-	 * that are likely to be often compressed with LZMA1 or LZMA2.
-	 */
-	uint32_t pb;
-#	define LZMA_PB_MIN      0
-#	define LZMA_PB_MAX      4
-#	define LZMA_PB_DEFAULT  2
-
-	/** Compression mode */
-	lzma_mode mode;
-
-	/**
-	 * \brief       Nice length of a match
-	 *
-	 * This determines how many bytes the encoder compares from the match
-	 * candidates when looking for the best match. Once a match of at
-	 * least nice_len bytes long is found, the encoder stops looking for
-	 * better candidates and encodes the match. (Naturally, if the found
-	 * match is actually longer than nice_len, the actual length is
-	 * encoded; it's not truncated to nice_len.)
-	 *
-	 * Bigger values usually increase the compression ratio and
-	 * compression time. For most files, 32 to 128 is a good value,
-	 * which gives very good compression ratio at good speed.
-	 *
-	 * The exact minimum value depends on the match finder. The maximum
-	 * is 273, which is the maximum length of a match that LZMA1 and
-	 * LZMA2 can encode.
-	 */
-	uint32_t nice_len;
-
-	/** Match finder ID */
-	lzma_match_finder mf;
-
-	/**
-	 * \brief       Maximum search depth in the match finder
-	 *
-	 * For every input byte, match finder searches through the hash chain
-	 * or binary tree in a loop, each iteration going one step deeper in
-	 * the chain or tree. The searching stops if
-	 *  - a match of at least nice_len bytes long is found;
-	 *  - all match candidates from the hash chain or binary tree have
-	 *    been checked; or
-	 *  - maximum search depth is reached.
-	 *
-	 * Maximum search depth is needed to prevent the match finder from
-	 * wasting too much time in case there are lots of short match
-	 * candidates. On the other hand, stopping the search before all
-	 * candidates have been checked can reduce compression ratio.
-	 *
-	 * Setting depth to zero tells liblzma to use an automatic default
-	 * value, that depends on the selected match finder and nice_len.
-	 * The default is in the range [4, 200] or so (it may vary between
-	 * liblzma versions).
-	 *
-	 * Using a bigger depth value than the default can increase
-	 * compression ratio in some cases. There is no strict maximum value,
-	 * but high values (thousands or millions) should be used with care:
-	 * the encoder could remain fast enough with typical input, but
-	 * malicious input could cause the match finder to slow down
-	 * dramatically, possibly creating a denial of service attack.
-	 */
-	uint32_t depth;
-
-	/*
-	 * Reserved space to allow possible future extensions without
-	 * breaking the ABI. You should not touch these, because the names
-	 * of these variables may change. These are and will never be used
-	 * with the currently supported options, so it is safe to leave these
-	 * uninitialized.
-	 */
-	uint32_t reserved_int1;
-	uint32_t reserved_int2;
-	uint32_t reserved_int3;
-	uint32_t reserved_int4;
-	uint32_t reserved_int5;
-	uint32_t reserved_int6;
-	uint32_t reserved_int7;
-	uint32_t reserved_int8;
-	lzma_reserved_enum reserved_enum1;
-	lzma_reserved_enum reserved_enum2;
-	lzma_reserved_enum reserved_enum3;
-	lzma_reserved_enum reserved_enum4;
-	void *reserved_ptr1;
-	void *reserved_ptr2;
-
-} lzma_options_lzma;
-
-
-/**
- * \brief       Set a compression preset to lzma_options_lzma structure
- *
- * 0 is the fastest and 9 is the slowest. These match the switches -0 .. -9
- * of the xz command line tool. In addition, it is possible to bitwise-or
- * flags to the preset. Currently only LZMA_PRESET_EXTREME is supported.
- * The flags are defined in container.h, because the flags are used also
- * with lzma_easy_encoder().
- *
- * The preset values are subject to changes between liblzma versions.
- *
- * This function is available only if LZMA1 or LZMA2 encoder has been enabled
- * when building liblzma.
- *
- * \return      On success, false is returned. If the preset is not
- *              supported, true is returned.
- */
-extern LZMA_API(lzma_bool) lzma_lzma_preset(
-		lzma_options_lzma *options, uint32_t preset) lzma_nothrow;