iobroker.lorawan 1.18.13 → 1.18.15

package/admin/i18n/zh-cn/translations.json

@@ -1,53 +1,76 @@
 {
-	"* Not Present (Virtual)": "*不存在（虚拟）",
-	"Adapter will be stoped": "Lorawan桥适配器将停止",
+	"* Not Present (Virtual)": "* 不存在（虚拟）",
+	"Adapter will be stoped": "LoRaWAN 桥适配器将停止",
 	"Application": "应用",
-	"AuthenticationHeader": "身份验证",
+	"AuthenticationHeader": "身份验证设置",
 	"AuthenticationInformation": "设置服务器的身份验证（如果需要）",
 	"BridgeConnectionTest": "连接测试",
-	"BridgeConnectionTestTooltip": "cklick此按钮，检查连接到您的桥梁",
-	"BridgeEnum": "桥梁枚举",
-	"BridgeEnumTooltip": "选择一个枚举，用于将外国带到桥梁",
-	"BridgeForeignConfigHeader": "外国的设置",
-	"BridgeForeignHeader": "选择桥梁枚举",
-	"BridgeForeignPanel": "外国桥梁",
-	"BridgeHeader": "外国系统的桥梁",
-	"BridgeInformation": "通过MQTT发现的桥梁的主要配置",
-	"BridgeLoRaConfigHeader": "洛万桥的索位",
-	"BridgeLoRaHeader": "设备Indetifier的定义",
-	"BridgeLoRaPanel": "桥梁洛万",
+	"BridgeConnectionTestTooltip": "单击此按钮，检查与您的网桥的连接",
+	"BridgeEnum": "桥枚举",
+	"BridgeEnumTooltip": "选择一个枚举，用于将外国国家带到桥上",
+	"BridgeForeignConfigHeader": "国外的设置",
+	"BridgeForeignHeader": "选择桥枚举",
+	"BridgeForeignPanel": "桥外语",
+	"BridgeHeader": "通往外部系统的桥梁",
+	"BridgeInformation": "通过 mqtt discovery 进行桥接的主要配置",
+	"BridgeLoRaConfigHeader": "洛拉万大桥的布景",
+	"BridgeLoRaHeader": "设备标识符的定义",
+	"BridgeLoRaPanel": "LoRaWAN桥",
 	"BridgePanel": "桥",
 	"BridgeStateHeader": "定义发现主题的状态",
-	"BridgeStateInformation": "在这里，您可以定义一系列状态，这些状态将设置为发现的主题。 （通配符也是可能的）",
-	"BridgeType": "桥梁类型",
+	"BridgeStateInformation": "您可以在此处定义一组状态，这些状态将设置为发现主题。 （也可以使用通配符）",
+	"BridgeType": "桥型",
 	"BridgeTypeHA": "家庭助理",
 	"BridgeTypeOff": "离开",
 	"BridgeTypeSH": "智能家居",
-	"BridgeTypeTooltip": "选择外国系统的类型",
+	"BridgeTypeTooltip": "选择外部系统类型",
 	"BridgenotificationActivation": "通知激活",
 	"BridgenotificationTooltip": "激活或停用通知",
 	"ClimateActTemperatureText": "目标温度",
-	"ClimateForeignHeader": "定义气候实体的国家",
+	"ClimateForeignHeader": "定义气候实体的状态",
 	"ClimateForeignInformation": "在这里您可以定义一系列气候定义",
-	"ClimateHeader": "定义气候实体的国家",
+	"ClimateHeader": "定义气候实体的状态",
 	"ClimateInformation": "在这里您可以定义一系列气候定义",
 	"ClimateModeTemperatureText": "模式",
-	"ClimateNameText": "EntityName",
+	"ClimateNameText": "实体名称",
 	"ClimateTargetTemperatureText": "目标温度",
+	"CommandText": "命令ID",
+	"CoverCloseText": "关闭命令ID",
+	"CoverClosedSignal": "关闭限位开关",
+	"CoverClosedSignalTooltip": "选择一个指示关闭状态的布尔信号",
+	"CoverClosedSignalTrue": "如果关闭则信号为 true",
+	"CoverClosedSignalTrueTooltip": "选择 true，如果在盖子关闭的情况下信号值为 true",
+	"CoverDownText": "向下命令ID",
+	"CoverHeader": "定义 Cover 实体的状态",
+	"CoverInformation": "在这里您可以定义一组封面定义",
+	"CoverNameText": "实体名称",
+	"CoverOpenSignal": "打开限位开关",
+	"CoverOpenSignalTooltip": "选择一个指示打开状态的布尔信号",
+	"CoverOpenSignalTrue": "如果打开则信号为真",
+	"CoverOpenSignalTrueTooltip": "如果盖子打开时信号值为 true，则选择 true",
+	"CoverOpenText": "打开命令ID",
+	"CoverPosition": "位置",
+	"CoverPositionTooltip": "已选择：位置的单独 ID",
+	"CoverSeparate": "分离",
+	"CoverSeparateTooltip": "selected：用于打开/关闭的单独布尔状态。否则，为一个字符串状态。",
+	"CoverSignal": "来自限位开关的信号",
+	"CoverStop": "停止",
+	"CoverStopText": "停止命令ID",
+	"CoverStopTooltip": "停止命令的附加状态",
 	"Device": "设备",
-	"DeviceIdentifierTooltip": "HA设备的标识符",
+	"DeviceIdentifierTooltip": "HA 设备的标识符",
 	"DeviceIdentifiers": "设备标识符",
 	"EnableRefresh": "循环发现",
-	"EnableRefreshTooltip": "使能够在循环克隆中发现",
+	"EnableRefreshTooltip": "能够在循环 cron 中发现",
 	"Folder": "文件夹",
 	"Humidifier": "加湿器",
-	"HumidifierActText": "实际的湿度",
+	"HumidifierActText": "实际湿度",
 	"HumidifierHeader": "定义加湿器实体的状态",
-	"HumidifierInformation": "在这里您可以定义一系列加湿器定义",
-	"HumidifierNameText": "EntityName",
-	"HumidifierOnOffText": "打开 /关",
+	"HumidifierInformation": "您可以在此处定义一系列加湿器定义",
+	"HumidifierNameText": "实体名称",
+	"HumidifierOnOffText": "开/关",
 	"HumidifierTargetText": "目标湿度",
-	"HumidifierTooltip": "加湿器 /除湿机",
+	"HumidifierTooltip": "加湿器/除湿器",
 	"LightBrightness": "亮度",
 	"LightBrightnessText": "亮度 ID",
 	"LightBrightnessTooltip": "启用设置亮度ID",
@@ -61,143 +84,147 @@
 	"LightInformation": "在这里您可以定义一组灯光定义",
 	"LightNameText": "实体名称",
 	"LightOnOffText": "开/关",
-	"LoRaWAN Network Service is connected": "Lorawan网络服务已连接",
-	"LoRaWAN Network Service is disconnected": "Lorawan网络服务已断开连接",
-	"LoRaWAN device is back online": "以下Lorawan设备返回在线",
-	"LoRaWAN device is offline": "以下Lorawan设备离线",
+	"LoRaWAN Network Service is connected": "LoRaWAN 网络服务已连接",
+	"LoRaWAN Network Service is disconnected": "LoRaWAN网络服务已断开",
+	"LoRaWAN device is back online": "以下 LoRaWAN 设备已重新上线",
+	"LoRaWAN device is offline": "以下 LoRaWAN 设备离线",
 	"LorawanOff": "离开",
 	"MQTTInstance": "MQTT实例",
-	"NoBridgeConfiged": "没有桥梁配置！！！",
-	"OriginHeader": "起源",
+	"NoBridgeConfiged": "没有配置桥接！！！",
+	"OneString": "一个命令字符串",
+	"OriginHeader": "原始设置",
 	"OriginInformation": "设置预期数据的来源",
 	"RefreshDiscoveryCronJob": "发现周期",
-	"RefreshDiscoveryCronJobTooltip": "插入Cronjob以刷新发现",
-	"SSL": "SSL",
-	"Serverinformation": "将主要通信设置设置为服务器",
-	"ServersettingsHeader": "彻底的",
+	"RefreshDiscoveryCronJobTooltip": "插入 cronjob 以刷新发现",
+	"SSL": "SSL协议",
+	"SeparateIds": "命令的分隔 ID",
+	"Serverinformation": "设置服务器的主要通信设置",
+	"ServersettingsHeader": "服务器设置",
 	"State": "状态",
 	"String": "细绳",
+	"UpText": "向上命令ID",
 	"VirtualMode": "虚拟模式",
-	"VirtualModeTooltip": "激活，如果不存在模式ID",
-	"WithAct": "与行动状态",
-	"WithActTooltip": "激活为实际值设置ID",
-	"_BridgeEnumDiscription": "选择一个枚举，用于将状态设置为桥梁。\n该设备的名称遵循此优先级：\n1。devicename\n2。频道名称\n3。状态名称空间",
-	"_DeviceIdentifierConfiguredDiscription": "配置主题的结果：",
-	"_DeviceIdentifierDiscription": "配置标识符为状态创建MQTT主题。您可以选择由分离器隔开的多个设备标识符。",
-	"_DeviceIdentifierExampleDiscription": "配置主题的示例：",
+	"VirtualModeTooltip": "如果模式 ID 不存在，则激活",
+	"WithAct": "与行为状态",
+	"WithActTooltip": "激活以设置实际值的 id",
+	"_BridgeEnumDiscription": "选择一个用于将状态设置到 Bridge 中的枚举。\n设备的名称遵循以下优先级：\n1. 设备名称\n2. 频道名称\n3. 状态的命名空间",
+	"_DeviceIdentifierConfiguredDiscription": "配置Topic的结果：",
+	"_DeviceIdentifierDiscription": "配置标识符以为状态创建 MQTT 主题。您可以选择多个设备标识符，并用分隔符分隔。",
+	"_DeviceIdentifierExampleDiscription": "配置主题示例：",
 	"_Deviceinformations": "设备信息",
-	"_DiscoveredIds": "Discoverd ID",
-	"_NoLoRaWAN": "国家不在正确的洛杉矶实例中",
-	"_PublishedIds": "已发布的ID",
-	"_SubscribedTopics": "订阅主题",
+	"_DiscoveredIds": "发现的 ID",
+	"_NoLoRaWAN": "状态不在正确的 LoRaWAN 实例中",
+	"_PublishedIds": "已发布的 ID",
+	"_SubscribedTopics": "订阅的主题",
 	"all notifications": "所有通知",
-	"applicationId": "应用ID",
-	"applicationName": "申请名称",
+	"applicationId": "应用程序 ID",
+	"applicationName": "应用名称",
 	"bridge connection": "连接通知",
 	"confirmed": "确认的",
-	"confirmedTooltip": "如果您想发送带有确认消息的下载启用此选项",
-	"connection to bridge is activ": "连接到桥梁是激活",
-	"connection to bridge is closed": "连接到桥梁将关闭",
-	"connection to bridge ok": "✅连接确定",
-	"crc": "校验和",
-	"crcTooltip": "将CRC16附加到您的数据",
-	"customConfig": "“自定义”  -  konfiguation",
-	"customConfigHeader": "在每个解码状态中添加一个特定的自定义对象",
-	"customConfigurationJsonActive": "“ configuration-custom” -json",
-	"customConfigurationJsonActiveTooltip": "使用此函数，您可以在配置频道的自定义参数上添加所需的JSON",
-	"customControlJsonActive": "“控制库” -JSON",
-	"customControlJsonActiveTooltip": "使用此函数，您可以在控制频道的自定义参与式上添加所需的JSON",
-	"customDecodedJsonActive": "“解码。custom” -json",
-	"customDeleteDesciption": "要删除条目，请输入带有内容“ null”的条目。",
+	"confirmedTooltip": "如果您想发送带有确认消息的下载，请启用此选项",
+	"connection to bridge is activ": "与网桥的连接已激活",
+	"connection to bridge is closed": "与网桥的连接将被关闭",
+	"connection to bridge ok": "✅ 连接正常",
+	"crc": "校验和（crc 16）",
+	"crcTooltip": "将 crc16 附加到您的数据中",
+	"customConfig": "“定制”-组合",
+	"customConfigHeader": "将特定的自定义对象添加到每个解码状态",
+	"customConfigurationJsonActive": "“配置-自定义”-JSON",
+	"customConfigurationJsonActiveTooltip": "使用此函数，您可以从配置通道在自定义条目上添加所需的 JSON",
+	"customControlJsonActive": "“控制-自定义”-JSON",
+	"customControlJsonActiveTooltip": "使用此函数，您可以从控制通道在自定义条目上添加所需的 JSON",
+	"customDecodedJsonActive": "“已解码.自定义”-JSON",
+	"customDeleteDesciption": "要删除条目，请输入内容为“null”的条目。",
 	"customDeleteDescriptionImageTooltip": "有关删除现有条目的信息。",
-	"customDesciption": "folwing图片向您展示了JSON编辑中数据的示例。有关更多信息，请使用文档。",
-	"customDescriptionImageTooltip": "请在编辑器中填充所需的JSON，您喜欢有共同的态度。",
-	"customJson": "objektfürden“习惯” -Bereich im“ Common” objekt",
-	"customJsonActiveTooltip": "通过此功能，可以将您自己的自定义条目添加到解码状态",
-	"customJsonInformation": "通过此功能，可以将自己的自定义条目添加到解码状态。只需在活动函数中输入所需的JSON内容即可。",
-	"customJsonTooltip": "fügensie ein objekt hinzu，通用韦尔奇。",
-	"decimalPlaces": "十进制位置",
-	"decimalPlacesTooltip": "选择所需的十进制数字",
+	"customDesciption": "下图显示了 JSON-EDITOR 中数据的示例。有关更多信息，请使用文档。",
+	"customDescriptionImageTooltip": "请在编辑器中填写您希望在解码状态的 common.custom 对象中拥有的所需 json。",
+	"customJson": "“自定义”对象-“通用”对象中的对象",
+	"customJsonActiveTooltip": "使用此功能，可以将您自己的自定义条目添加到解码状态",
+	"customJsonInformation": "使用此功能，可以将您自己的自定义条目添加到解码状态。只需在 active 函数中输入所需的 json 内容即可。",
+	"customJsonTooltip": "Fügen Sie ein Objekt hinzu, welches in common.custom geschrieben wrd.",
+	"decimalPlaces": "小数位",
+	"decimalPlacesTooltip": "选择所需的小数位数",
 	"device online offline": "设备状态通知",
-	"deviceEUI": "设备EUI",
-	"deviceId": "设备ID",
+	"deviceEUI": "设备用户界面",
+	"deviceId": "设备 ID",
 	"deviceType": "设备类型",
-	"deviceTypeTooltip": "插入设备类型的名称，此配置是有效的。 （例如，Dragino XY也与Dragino匹配）",
-	"downlinkConfig": "Donwlink-Konfiguration",
-	"downlinkConfigHeader": "添加特定设备的下行链接",
-	"downlinkConfigMainHeader": "主下行链路配置",
-	"downlinkConfigSubHeader": "单个下行链路配置",
+	"deviceTypeTooltip": "插入设备类型的名称，此配置有效。 （例如，Dragino XY 也匹配 Dragino）",
+	"downlinkConfig": "下行链路配置",
+	"downlinkConfigHeader": "添加您的设备特定的下行链路",
+	"downlinkConfigMainHeader": "主要下行配置",
+	"downlinkConfigSubHeader": "单独的下行链路配置",
 	"enabled & collect": "启用并收集",
 	"end": "最终值",
-	"endTooltip": "插入最终值，将设置为下行链路（值必须在十六进制 -  exept类型字符串中）",
-	"expertSettings": "专家选择",
+	"endTooltip": "插入最终值，该值将设置为下行链路（值必须为十六进制 - 字符串类型除外）",
+	"expertSettings": "专家设置",
 	"front": "前值",
-	"frontTooltip": "插入前价值，将设置为下行链路（值必须在十六进制 -  exept类型字符串中）",
-	"ipUrl": "服务器的URL或IP",
-	"ipUrlTooltip": "输入IP地址或您要连接到的URL",
-	"keepalive": "保存",
-	"keepaliveTooltip": "输入秒数的时间以供存储功能",
+	"frontTooltip": "插入前值，该值将设置为下行链路（值必须为十六进制 - 字符串类型除外）",
+	"ipUrl": "服务器的 url 或 ip",
+	"ipUrlTooltip": "输入ip地址，或者你想要连接的url",
+	"keepalive": "保活",
+	"keepaliveTooltip": "输入保活功能的时间（以秒为单位）",
 	"lengthInByte": "状态长度（字节）",
-	"lengthInByteTooltip": "在字节中插入状态的长度",
-	"limitMax": "限制最大",
-	"limitMaxTooltip": "限制向积极方向输入的可能性",
+	"lengthInByteTooltip": "插入状态的长度（以字节为单位）",
+	"limitMax": "限制最大值",
+	"limitMaxTooltip": "限制正向输入的可能性",
 	"limitMaxValue": "最大限度。价值",
-	"limitMaxValueTooltip": "在正方向上输入极限",
-	"limitMin": "限制最小。",
-	"limitMinTooltip": "限制了朝负方向输入的可能性",
-	"limitMinValue": "最小。价值",
-	"limitMinValueTooltip": "在负方向上输入极限",
-	"lorawan adapter settings": "Lorawan的适配器设置",
+	"limitMaxValueTooltip": "输入正方向的极限值",
+	"limitMin": "限制最小值",
+	"limitMinTooltip": "限制负方向输入的可能性",
+	"limitMinValue": "分钟。价值",
+	"limitMinValueTooltip": "输入负方向的极限值",
+	"lorawan adapter settings": "lorawan 的适配器设置",
 	"mainSettings": "主要设置",
 	"minus": "减",
-	"multiplyfaktor": "乘法",
-	"multiplyfaktorTooltip": "插入要乘数据的Faktor（例如，输入1（min）=> 60s）",
+	"multiplyfaktor": "多重因素",
+	"multiplyfaktorTooltip": "插入您想要与数据相乘的因子（例如，输入 1(min) => 60s 为 60）",
 	"name": "姓名",
-	"nameTooltip": "插入状态的名称，为此Dowlink",
-	"new device discovered": "发现了新设备",
+	"nameTooltip": "为此下行链接插入州名称",
+	"new device discovered": "发现新设备",
 	"new discover": "发现通知",
 	"no": "没有任何",
+	"no command": "没有命令 ID",
 	"no connection to bridge": "❌没有连接",
-	"no crc": "没有CRC添加",
+	"no crc": "没有添加crc",
 	"no notification": "没有通知",
-	"no notifications": "非专用",
+	"no notifications": "不通知",
 	"notification": "通知",
 	"notificationActivation": "通知激活",
 	"notificationTooltip": "激活或停用通知",
 	"off": "离开",
-	"offTooltip": "如果将状态设置为false，插入要发送的值",
+	"offTooltip": "如果将状态设置为 false，则插入要发送的值",
 	"on": "在",
-	"onClick": "点击",
-	"onClickTooltip": "如果将状态设置为true，请插入要发送的值（按钮单击）",
-	"onTooltip": "如果将状态设置为true，请插入要发送的值",
+	"onClick": "点击时",
+	"onClickTooltip": "如果将状态设置为 true（单击按钮），则插入要发送的值",
+	"onTooltip": "如果将状态设置为 true，则插入要发送的值",
 	"origin": "起源",
-	"originTooltip": "选择数据的来源",
+	"originTooltip": "选择您的数据来源",
 	"password": "密码",
 	"passwordTooltip": "输入您的密码",
 	"port": "港口",
 	"portDownlink": "港口",
-	"portDownlinkTooltip": "输入您要在下行链路中发送的端口",
+	"portDownlinkTooltip": "输入你要下行发送的端口",
 	"portTooltip": "输入连接的端口",
 	"priority": "优先事项",
-	"priorityTooltip": "输入您要发送下行链路的优先级",
-	"publishTooltip": "在桥上发布状态",
-	"sendWithUplink": "与上行链路发送",
-	"sendWithUplinkTooltip": "选择带有所需DeviceType的配置的发送模式",
-	"separator": "分离器",
-	"separatorTooltip": "为标识符选择一个分离器",
+	"priorityTooltip": "输入您要在下行链路中发送的优先级",
+	"publishTooltip": "在 Bridge 上发布状态",
+	"sendWithUplink": "通过上行链路发送",
+	"sendWithUplinkTooltip": "选择具有所需设备类型的配置的发送模式",
+	"separator": "分隔符",
+	"separatorTooltip": "选择标识符的分隔符",
 	"space": "空间",
-	"sslTooltip": "如果您的连接使用SSL，请启用此复选框（使用HPPTS而不是HTTP）",
-	"subscribeTooltip": "从桥梁订阅州",
-	"swap": "小恩迪安（Sawp Byteorder）",
-	"swapTooltip": "交换输入的字节码器",
+	"sslTooltip": "如果您的连接使用 ssl，请启用此复选框（使用 hpts 而不是 http）",
+	"subscribeTooltip": "从 Bridge 订阅状态",
+	"swap": "小尾数（sawp 字节顺序）",
+	"swapTooltip": "交换输入的字节码",
 	"type": "类型",
-	"typeTooltip": "选择您喜欢选择的输入类型",
+	"typeTooltip": "选择您想要选择的输入类型",
 	"underline": "强调",
 	"unit": "单元",
-	"unitTooltip": "插入您的价值",
+	"unitTooltip": "插入您的值的单位",
 	"unused": "未使用",
 	"usedApplicationName": "使用的应用程序名称（common.name）",
-	"usedDeviceId": "二手设备ID（common.name）",
+	"usedDeviceId": "使用的设备 ID（common.name）",
 	"username": "用户名",
 	"usernameTooltip": "输入您的用户名"
 }

package/admin/jsonConfig.json

@@ -1862,7 +1862,6 @@
 					"newLine": true,
 					"type": "header",
 					"text": "CoverHeader",
-					"hidden": "true",
 					"size": 3,
 					"xs": 12,
 					"sm": 12,
@@ -1874,7 +1873,6 @@
 					"newLine":true,
 					"type": "staticText",
 					"label": "CoverInformation",
-					"hidden": "true",
 					"xs": 12,
 					"sm": 12,
 					"md": 12,
@@ -1885,7 +1883,6 @@
                     "newLine": true,
                     "type":"accordion",
 					"titleAttr": "CoverName",
-					"hidden": "true",
 					"clone": true,
 					"xs": 12,
 					"sm": 12,
@@ -1913,7 +1910,8 @@
 							"tooltip": "CoverSeparateTooltip",
 							"options": [
 								{"label":"SeparateIds","value":"separate"},
-								{"label":"OneString","value":"string"}
+								{"label":"OneString","value":"string"},
+								{"label":"no command","value":"noCommand"}
 							],
 							"default": "separate",
 							"xs": 12,
@@ -1922,6 +1920,16 @@
 							"lg": 2,
 							"xl": 2
 						},
+						{
+							"type": "staticText",
+							"attr": "_staticTextStop",
+							"label": "",
+							"xs": 12,
+							"sm": 2,
+							"md": 2,
+							"lg": 2,
+							"xl": 2
+						},	
 						{
 							"type": "checkbox",
 							"attr": "CoverStop",
@@ -1936,9 +1944,11 @@
 							"xl": 2
 						},
 						{
-							"type": "staticText",
-							"attr": "_staticTextTarget",
-							"label": "",
+							"type": "objectId",
+							"newLine": true,
+							"attr": "CommandId",
+							"label": "CommandText",
+							"hidden": "data.CoverSeparate !== 'string'",
 							"xs": 12,
 							"sm": 4,
 							"md": 4,
@@ -1947,9 +1957,10 @@
 						},
 						{
 							"type": "objectId",
-							"attr": "CommandId",
-							"label": "CommandText",
-							"hidden": "data.CoverSeparate === 'separate'",
+							"newLine": true,
+							"attr": "OpenId",
+							"label": "CoverOpenText",
+							"hidden": "data.CoverSeparate !== 'separate'",
 							"xs": 12,
 							"sm": 4,
 							"md": 4,
@@ -1958,9 +1969,9 @@
 						},
 						{
 							"type": "objectId",
-							"attr": "UpId",
-							"label": "UpText",
-							"hidden": "data.CoverSeparate === false",
+							"attr": "CloseId",
+							"label": "CoverCloseText",
+							"hidden": "data.CoverSeparate !== 'separate'",
 							"xs": 12,
 							"sm": 4,
 							"md": 4,
@@ -1969,20 +1980,128 @@
 						},
 						{
 							"type": "objectId",
-							"attr": "DownId",
-							"label": "CoverDownText",
-							"hidden": "data.CoverSeparate === false",
+							"attr": "StopId",
+							"label": "CoverStopText",
+							"hidden": "data.CoverSeparate !== 'separate' || data.CoverStop === false",
 							"xs": 12,
 							"sm": 4,
 							"md": 4,
 							"lg": 4,
 							"xl": 4
 						},
+						{
+							"type": "checkbox",
+							"attr": "CoverPosition",
+							"label": "CoverPosition",
+							"tooltip": "CoverPositionTooltip",
+							"newLine": true,
+							"default": true,
+							"xs": 12,
+							"sm": 2,
+							"md": 2,
+							"lg": 2,
+							"xl": 2
+						},
+						{
+							"type": "staticText",
+							"attr": "_staticTextPosition",
+							"label": "",
+							"xs": 12,
+							"sm": 2,
+							"md": 2,
+							"lg": 2,
+							"xl": 2
+						},
 						{
 							"type": "objectId",
-							"attr": "StopId",
-							"label": "CoverStopText",
-							"hidden": "data.CoverSeparate === false || data.CoverStop === false",
+							"attr": "PositionId",
+							"label": "CoverPositionText",
+							"hidden": "data.CoverPosition === false",
+							"xs": 12,
+							"sm": 4,
+							"md": 4,
+							"lg": 4,
+							"xl": 4
+						},
+						{
+							"type": "staticText",
+							"attr": "_staticTextSignal",
+							"label": "CoverSignal",
+							"newLine": true,
+							"xs": 12,
+							"sm": 12,
+							"md": 12,
+							"lg": 12,
+							"xl": 12
+						},						
+						{
+							"type": "checkbox",
+							"newLine": true,
+							"attr": "CoverOpenSignal",
+							"label": "CoverOpenSignal",
+							"tooltip": "CoverOpenSignalTooltip",
+							"default": false,
+							"xs": 12,
+							"sm": 2,
+							"md": 2,
+							"lg": 2,
+							"xl": 2
+						},						
+						{
+							"type": "checkbox",
+							"attr": "CoverOpenSignalTrue",
+							"label": "CoverOpenSignalTrue",
+							"tooltip": "CoverOpenSignalTrueTooltip",
+							"hidden": "data.CoverOpenSignal === false",
+							"default": true,
+							"xs": 12,
+							"sm": 2,
+							"md": 2,
+							"lg": 2,
+							"xl": 2
+						},
+						{
+							"type": "objectId",
+							"attr": "OpenSignalId",
+							"label": "CoverOpenSignalText",
+							"hidden": "data.CoverOpenSignal === false",
+							"xs": 12,
+							"sm": 4,
+							"md": 4,
+							"lg": 4,
+							"xl": 4
+						},
+						{
+							"type": "checkbox",
+							"newLine": true,
+							"attr": "CoverClosedSignal",
+							"label": "CoverClosedSignal",
+							"tooltip": "CoverClosedSignalTooltip",
+							"default": true,
+							"xs": 12,
+							"sm": 2,
+							"md": 2,
+							"lg": 2,
+							"xl": 2
+						},
+						{
+							"type": "checkbox",
+							"attr": "CoverClosedSignalTrue",
+							"label": "CoverClosedSignalTrue",
+							"tooltip": "CoverClosedSignalTrueTooltip",
+							"hidden": "data.CoverClosedSignal === false",
+							"default": true,
+							"xs": 12,
+							"sm": 2,
+							"md": 2,
+							"lg": 2,
+							"xl": 2
+						},
+						{
+							"type": "objectId",
+							"attr": "ClosedSignalId",
+							"label": "CoverClosedSignalText",
+							"hidden": "data.CoverClosedSignal === false",
 							"xs": 12,
 							"sm": 4,
 							"md": 4,