aigroup-workflow 2.2.1 → 2.2.2

package/skills/ai-ml/fine-tuning-expert/references/lora-peft.md

@@ -1,347 +1,347 @@
-# LoRA and Parameter-Efficient Fine-Tuning
-
----
-
-## Overview
-
-Parameter-Efficient Fine-Tuning (PEFT) methods train only a small subset of model parameters while keeping the base model frozen. This dramatically reduces memory requirements and enables fine-tuning of large models on consumer hardware.
-
-## When to Use PEFT vs Full Fine-Tuning
-
-| Method | Use When | Avoid When |
-|--------|----------|------------|
-| **LoRA** | 7B+ models, limited VRAM, need multiple task adapters | Very small models (<1B), need maximum quality |
-| **QLoRA** | 13B+ models, single GPU, memory-constrained | High-throughput training, inference speed critical |
-| **Full Fine-Tuning** | Small models, abundant compute, maximum performance needed | Large models, limited resources |
-| **Prefix Tuning** | Generation tasks, need interpretable soft prompts | Complex reasoning tasks |
-| **IA3** | Extreme efficiency needed, inference overhead critical | Tasks needing high adapter capacity |
-
-## LoRA Configuration
-
-```python
-from peft import LoraConfig, get_peft_model, TaskType
-from transformers import AutoModelForCausalLM, AutoTokenizer
-
-# Load base model
-model = AutoModelForCausalLM.from_pretrained(
-    "meta-llama/Llama-3.1-8B",
-    torch_dtype=torch.bfloat16,
-    device_map="auto",
-    attn_implementation="flash_attention_2"  # Use Flash Attention if available
-)
-
-# LoRA configuration for instruction tuning
-lora_config = LoraConfig(
-    task_type=TaskType.CAUSAL_LM,
-    r=16,                          # Rank - start with 8-16, increase if underfitting
-    lora_alpha=32,                 # Alpha - typically 2x rank
-    lora_dropout=0.05,             # Dropout for regularization
-    target_modules=[               # Target attention layers
-        "q_proj", "k_proj", "v_proj", "o_proj",  # Attention
-        "gate_proj", "up_proj", "down_proj"       # MLP (optional, increases capacity)
-    ],
-    bias="none",                   # "none", "all", or "lora_only"
-    modules_to_save=None           # Modules to train fully (e.g., embed_tokens for new tokens)
-)
-
-# Create PEFT model
-model = get_peft_model(model, lora_config)
-model.print_trainable_parameters()
-# Output: trainable params: 13,631,488 || all params: 8,043,163,648 || trainable%: 0.1695
-```
-
-### Rank Selection Guide
-
-```python
-def recommend_lora_rank(task_complexity: str, dataset_size: int, model_size_b: float) -> int:
-    """
-    Recommend LoRA rank based on task and resources.
-
-    Args:
-        task_complexity: "simple" (classification), "moderate" (QA), "complex" (creative)
-        dataset_size: Number of training examples
-        model_size_b: Model size in billions of parameters
-    """
-    base_rank = {
-        "simple": 8,
-        "moderate": 16,
-        "complex": 32
-    }[task_complexity]
-
-    # Adjust for dataset size
-    if dataset_size < 1000:
-        rank = max(4, base_rank // 2)  # Reduce rank to prevent overfitting
-    elif dataset_size > 50000:
-        rank = min(64, base_rank * 2)  # Can support higher rank
-    else:
-        rank = base_rank
-
-    # Adjust for model size (larger models may need lower rank)
-    if model_size_b > 30:
-        rank = max(4, rank // 2)
-
-    return rank
-
-# Example usage
-rank = recommend_lora_rank("moderate", dataset_size=10000, model_size_b=8)
-print(f"Recommended rank: {rank}")  # 16
-```
-
-## QLoRA Configuration
-
-QLoRA combines 4-bit quantization with LoRA for extreme memory efficiency.
-
-```python
-from transformers import BitsAndBytesConfig
-import torch
-
-# 4-bit quantization config
-bnb_config = BitsAndBytesConfig(
-    load_in_4bit=True,
-    bnb_4bit_quant_type="nf4",           # NormalFloat4 for better quality
-    bnb_4bit_compute_dtype=torch.bfloat16,
-    bnb_4bit_use_double_quant=True        # Nested quantization for more savings
-)
-
-# Load quantized model
-model = AutoModelForCausalLM.from_pretrained(
-    "meta-llama/Llama-3.1-70B",
-    quantization_config=bnb_config,
-    device_map="auto",
-    attn_implementation="flash_attention_2"
-)
-
-# Prepare model for kbit training
-from peft import prepare_model_for_kbit_training
-model = prepare_model_for_kbit_training(model, use_gradient_checkpointing=True)
-
-# Apply LoRA
-lora_config = LoraConfig(
-    r=16,
-    lora_alpha=32,
-    target_modules=["q_proj", "k_proj", "v_proj", "o_proj"],
-    lora_dropout=0.05,
-    bias="none",
-    task_type=TaskType.CAUSAL_LM
-)
-model = get_peft_model(model, lora_config)
-```
-
-### Memory Comparison
-
-| Model | Full FT | LoRA (r=16) | QLoRA (r=16) |
-|-------|---------|-------------|--------------|
-| Llama 3.1 8B | ~64 GB | ~18 GB | ~6 GB |
-| Llama 3.1 70B | ~560 GB | ~160 GB | ~48 GB |
-| Mistral 7B | ~56 GB | ~16 GB | ~5 GB |
-
-## Training with PEFT
-
-```python
-from transformers import TrainingArguments, Trainer
-from trl import SFTTrainer
-
-training_args = TrainingArguments(
-    output_dir="./lora-output",
-    num_train_epochs=3,
-    per_device_train_batch_size=4,
-    gradient_accumulation_steps=4,      # Effective batch size = 16
-    learning_rate=2e-4,                  # Higher LR for LoRA than full FT
-    lr_scheduler_type="cosine",
-    warmup_ratio=0.03,
-    logging_steps=10,
-    save_strategy="steps",
-    save_steps=100,
-    evaluation_strategy="steps",
-    eval_steps=100,
-    bf16=True,
-    gradient_checkpointing=True,
-    gradient_checkpointing_kwargs={"use_reentrant": False},
-    optim="paged_adamw_8bit",            # Memory-efficient optimizer
-    max_grad_norm=0.3,
-    group_by_length=True,                # Group similar length sequences
-    report_to="wandb"
-)
-
-# Using TRL's SFTTrainer for instruction tuning
-trainer = SFTTrainer(
-    model=model,
-    args=training_args,
-    train_dataset=train_dataset,
-    eval_dataset=eval_dataset,
-    tokenizer=tokenizer,
-    max_seq_length=2048,
-    packing=True,                        # Pack short sequences for efficiency
-    dataset_text_field="text"
-)
-
-trainer.train()
-```
-
-## Target Module Selection
-
-Different architectures have different module names:
-
-```python
-# Common target modules by architecture
-TARGET_MODULES = {
-    "llama": ["q_proj", "k_proj", "v_proj", "o_proj", "gate_proj", "up_proj", "down_proj"],
-    "mistral": ["q_proj", "k_proj", "v_proj", "o_proj", "gate_proj", "up_proj", "down_proj"],
-    "falcon": ["query_key_value", "dense", "dense_h_to_4h", "dense_4h_to_h"],
-    "gpt2": ["c_attn", "c_proj", "c_fc"],
-    "phi": ["q_proj", "k_proj", "v_proj", "dense", "fc1", "fc2"],
-    "qwen2": ["q_proj", "k_proj", "v_proj", "o_proj", "gate_proj", "up_proj", "down_proj"],
-}
-
-def get_target_modules(model_name: str, include_mlp: bool = True) -> list[str]:
-    """Get appropriate target modules for a model architecture."""
-    name_lower = model_name.lower()
-
-    for arch, modules in TARGET_MODULES.items():
-        if arch in name_lower:
-            if include_mlp:
-                return modules
-            # Return only attention modules
-            attention_keywords = ["q_proj", "k_proj", "v_proj", "o_proj", "query", "key", "value", "attn"]
-            return [m for m in modules if any(kw in m.lower() for kw in attention_keywords)]
-
-    # Default for unknown architectures - inspect model
-    raise ValueError(f"Unknown architecture: {model_name}. Inspect model.named_modules() to find target modules.")
-```
-
-## Adapter Merging Strategies
-
-```python
-from peft import PeftModel
-
-# Load base model and adapter
-base_model = AutoModelForCausalLM.from_pretrained("meta-llama/Llama-3.1-8B")
-model = PeftModel.from_pretrained(base_model, "path/to/lora-adapter")
-
-# Method 1: Merge adapter weights into base model
-merged_model = model.merge_and_unload()
-merged_model.save_pretrained("./merged-model")
-
-# Method 2: Merge multiple adapters (weighted combination)
-from peft import add_weighted_adapter
-
-# Load multiple adapters
-model = PeftModel.from_pretrained(base_model, "adapter1", adapter_name="adapter1")
-model.load_adapter("adapter2", adapter_name="adapter2")
-model.load_adapter("adapter3", adapter_name="adapter3")
-
-# Combine with weights
-model.add_weighted_adapter(
-    adapters=["adapter1", "adapter2", "adapter3"],
-    weights=[0.5, 0.3, 0.2],
-    adapter_name="combined",
-    combination_type="linear"  # or "svd", "cat"
-)
-model.set_adapter("combined")
-```
-
-## DoRA (Weight-Decomposed LoRA)
-
-DoRA improves on LoRA by decomposing weights into magnitude and direction components.
-
-```python
-from peft import LoraConfig
-
-# DoRA configuration
-dora_config = LoraConfig(
-    r=16,
-    lora_alpha=32,
-    target_modules=["q_proj", "k_proj", "v_proj", "o_proj"],
-    lora_dropout=0.05,
-    use_dora=True,  # Enable DoRA
-    task_type=TaskType.CAUSAL_LM
-)
-
-# Training is identical to LoRA
-model = get_peft_model(model, dora_config)
-```
-
-## rsLoRA (Rank-Stabilized LoRA)
-
-Proper scaling for higher ranks:
-
-```python
-from peft import LoraConfig
-
-# rsLoRA for high-rank training
-rslora_config = LoraConfig(
-    r=64,  # Higher rank
-    lora_alpha=64,
-    target_modules=["q_proj", "k_proj", "v_proj", "o_proj"],
-    use_rslora=True,  # Rank-stabilized scaling
-    task_type=TaskType.CAUSAL_LM
-)
-```
-
-## Common Issues and Solutions
-
-### Issue: Loss Not Decreasing
-
-```python
-# Check 1: Verify adapter is training
-for name, param in model.named_parameters():
-    if param.requires_grad:
-        print(f"Training: {name}")
-
-# Check 2: Increase rank or alpha
-config = LoraConfig(r=32, lora_alpha=64, ...)
-
-# Check 3: Reduce learning rate
-training_args = TrainingArguments(learning_rate=1e-4, ...)
-```
-
-### Issue: Out of Memory
-
-```python
-# Solution 1: Use QLoRA
-bnb_config = BitsAndBytesConfig(load_in_4bit=True, ...)
-
-# Solution 2: Enable gradient checkpointing
-model.gradient_checkpointing_enable()
-
-# Solution 3: Reduce batch size, increase gradient accumulation
-training_args = TrainingArguments(
-    per_device_train_batch_size=1,
-    gradient_accumulation_steps=16
-)
-
-# Solution 4: Use 8-bit optimizer
-training_args = TrainingArguments(optim="paged_adamw_8bit")
-```
-
-### Issue: Adapter Not Loading
-
-```python
-# Ensure architecture matches
-from peft import PeftModel, PeftConfig
-
-# Check adapter config
-config = PeftConfig.from_pretrained("path/to/adapter")
-print(f"Base model: {config.base_model_name_or_path}")
-print(f"Target modules: {config.target_modules}")
-
-# Load with correct base model
-base_model = AutoModelForCausalLM.from_pretrained(config.base_model_name_or_path)
-model = PeftModel.from_pretrained(base_model, "path/to/adapter")
-```
-
-## Quick Reference
-
-| Parameter | Typical Range | Effect |
-|-----------|---------------|--------|
-| `r` (rank) | 4-64 | Adapter capacity; higher = more expressive |
-| `lora_alpha` | r to 2*r | Scaling factor; higher = larger updates |
-| `lora_dropout` | 0.0-0.1 | Regularization; increase for small datasets |
-| `learning_rate` | 1e-5 to 3e-4 | LoRA tolerates higher LR than full FT |
-| `target_modules` | attention + MLP | More modules = more capacity + memory |
-
-## Related References
-
-- `hyperparameter-tuning.md` - Learning rate schedules, batch sizes
-- `deployment-optimization.md` - Adapter merging, quantization for inference
-- `dataset-preparation.md` - Training data formatting
+# LoRA and Parameter-Efficient Fine-Tuning
+
+---
+
+## Overview
+
+Parameter-Efficient Fine-Tuning (PEFT) methods train only a small subset of model parameters while keeping the base model frozen. This dramatically reduces memory requirements and enables fine-tuning of large models on consumer hardware.
+
+## When to Use PEFT vs Full Fine-Tuning
+
+| Method | Use When | Avoid When |
+|--------|----------|------------|
+| **LoRA** | 7B+ models, limited VRAM, need multiple task adapters | Very small models (<1B), need maximum quality |
+| **QLoRA** | 13B+ models, single GPU, memory-constrained | High-throughput training, inference speed critical |
+| **Full Fine-Tuning** | Small models, abundant compute, maximum performance needed | Large models, limited resources |
+| **Prefix Tuning** | Generation tasks, need interpretable soft prompts | Complex reasoning tasks |
+| **IA3** | Extreme efficiency needed, inference overhead critical | Tasks needing high adapter capacity |
+
+## LoRA Configuration
+
+```python
+from peft import LoraConfig, get_peft_model, TaskType
+from transformers import AutoModelForCausalLM, AutoTokenizer
+
+# Load base model
+model = AutoModelForCausalLM.from_pretrained(
+    "meta-llama/Llama-3.1-8B",
+    torch_dtype=torch.bfloat16,
+    device_map="auto",
+    attn_implementation="flash_attention_2"  # Use Flash Attention if available
+)
+
+# LoRA configuration for instruction tuning
+lora_config = LoraConfig(
+    task_type=TaskType.CAUSAL_LM,
+    r=16,                          # Rank - start with 8-16, increase if underfitting
+    lora_alpha=32,                 # Alpha - typically 2x rank
+    lora_dropout=0.05,             # Dropout for regularization
+    target_modules=[               # Target attention layers
+        "q_proj", "k_proj", "v_proj", "o_proj",  # Attention
+        "gate_proj", "up_proj", "down_proj"       # MLP (optional, increases capacity)
+    ],
+    bias="none",                   # "none", "all", or "lora_only"
+    modules_to_save=None           # Modules to train fully (e.g., embed_tokens for new tokens)
+)
+
+# Create PEFT model
+model = get_peft_model(model, lora_config)
+model.print_trainable_parameters()
+# Output: trainable params: 13,631,488 || all params: 8,043,163,648 || trainable%: 0.1695
+```
+
+### Rank Selection Guide
+
+```python
+def recommend_lora_rank(task_complexity: str, dataset_size: int, model_size_b: float) -> int:
+    """
+    Recommend LoRA rank based on task and resources.
+
+    Args:
+        task_complexity: "simple" (classification), "moderate" (QA), "complex" (creative)
+        dataset_size: Number of training examples
+        model_size_b: Model size in billions of parameters
+    """
+    base_rank = {
+        "simple": 8,
+        "moderate": 16,
+        "complex": 32
+    }[task_complexity]
+
+    # Adjust for dataset size
+    if dataset_size < 1000:
+        rank = max(4, base_rank // 2)  # Reduce rank to prevent overfitting
+    elif dataset_size > 50000:
+        rank = min(64, base_rank * 2)  # Can support higher rank
+    else:
+        rank = base_rank
+
+    # Adjust for model size (larger models may need lower rank)
+    if model_size_b > 30:
+        rank = max(4, rank // 2)
+
+    return rank
+
+# Example usage
+rank = recommend_lora_rank("moderate", dataset_size=10000, model_size_b=8)
+print(f"Recommended rank: {rank}")  # 16
+```
+
+## QLoRA Configuration
+
+QLoRA combines 4-bit quantization with LoRA for extreme memory efficiency.
+
+```python
+from transformers import BitsAndBytesConfig
+import torch
+
+# 4-bit quantization config
+bnb_config = BitsAndBytesConfig(
+    load_in_4bit=True,
+    bnb_4bit_quant_type="nf4",           # NormalFloat4 for better quality
+    bnb_4bit_compute_dtype=torch.bfloat16,
+    bnb_4bit_use_double_quant=True        # Nested quantization for more savings
+)
+
+# Load quantized model
+model = AutoModelForCausalLM.from_pretrained(
+    "meta-llama/Llama-3.1-70B",
+    quantization_config=bnb_config,
+    device_map="auto",
+    attn_implementation="flash_attention_2"
+)
+
+# Prepare model for kbit training
+from peft import prepare_model_for_kbit_training
+model = prepare_model_for_kbit_training(model, use_gradient_checkpointing=True)
+
+# Apply LoRA
+lora_config = LoraConfig(
+    r=16,
+    lora_alpha=32,
+    target_modules=["q_proj", "k_proj", "v_proj", "o_proj"],
+    lora_dropout=0.05,
+    bias="none",
+    task_type=TaskType.CAUSAL_LM
+)
+model = get_peft_model(model, lora_config)
+```
+
+### Memory Comparison
+
+| Model | Full FT | LoRA (r=16) | QLoRA (r=16) |
+|-------|---------|-------------|--------------|
+| Llama 3.1 8B | ~64 GB | ~18 GB | ~6 GB |
+| Llama 3.1 70B | ~560 GB | ~160 GB | ~48 GB |
+| Mistral 7B | ~56 GB | ~16 GB | ~5 GB |
+
+## Training with PEFT
+
+```python
+from transformers import TrainingArguments, Trainer
+from trl import SFTTrainer
+
+training_args = TrainingArguments(
+    output_dir="./lora-output",
+    num_train_epochs=3,
+    per_device_train_batch_size=4,
+    gradient_accumulation_steps=4,      # Effective batch size = 16
+    learning_rate=2e-4,                  # Higher LR for LoRA than full FT
+    lr_scheduler_type="cosine",
+    warmup_ratio=0.03,
+    logging_steps=10,
+    save_strategy="steps",
+    save_steps=100,
+    evaluation_strategy="steps",
+    eval_steps=100,
+    bf16=True,
+    gradient_checkpointing=True,
+    gradient_checkpointing_kwargs={"use_reentrant": False},
+    optim="paged_adamw_8bit",            # Memory-efficient optimizer
+    max_grad_norm=0.3,
+    group_by_length=True,                # Group similar length sequences
+    report_to="wandb"
+)
+
+# Using TRL's SFTTrainer for instruction tuning
+trainer = SFTTrainer(
+    model=model,
+    args=training_args,
+    train_dataset=train_dataset,
+    eval_dataset=eval_dataset,
+    tokenizer=tokenizer,
+    max_seq_length=2048,
+    packing=True,                        # Pack short sequences for efficiency
+    dataset_text_field="text"
+)
+
+trainer.train()
+```
+
+## Target Module Selection
+
+Different architectures have different module names:
+
+```python
+# Common target modules by architecture
+TARGET_MODULES = {
+    "llama": ["q_proj", "k_proj", "v_proj", "o_proj", "gate_proj", "up_proj", "down_proj"],
+    "mistral": ["q_proj", "k_proj", "v_proj", "o_proj", "gate_proj", "up_proj", "down_proj"],
+    "falcon": ["query_key_value", "dense", "dense_h_to_4h", "dense_4h_to_h"],
+    "gpt2": ["c_attn", "c_proj", "c_fc"],
+    "phi": ["q_proj", "k_proj", "v_proj", "dense", "fc1", "fc2"],
+    "qwen2": ["q_proj", "k_proj", "v_proj", "o_proj", "gate_proj", "up_proj", "down_proj"],
+}
+
+def get_target_modules(model_name: str, include_mlp: bool = True) -> list[str]:
+    """Get appropriate target modules for a model architecture."""
+    name_lower = model_name.lower()
+
+    for arch, modules in TARGET_MODULES.items():
+        if arch in name_lower:
+            if include_mlp:
+                return modules
+            # Return only attention modules
+            attention_keywords = ["q_proj", "k_proj", "v_proj", "o_proj", "query", "key", "value", "attn"]
+            return [m for m in modules if any(kw in m.lower() for kw in attention_keywords)]
+
+    # Default for unknown architectures - inspect model
+    raise ValueError(f"Unknown architecture: {model_name}. Inspect model.named_modules() to find target modules.")
+```
+
+## Adapter Merging Strategies
+
+```python
+from peft import PeftModel
+
+# Load base model and adapter
+base_model = AutoModelForCausalLM.from_pretrained("meta-llama/Llama-3.1-8B")
+model = PeftModel.from_pretrained(base_model, "path/to/lora-adapter")
+
+# Method 1: Merge adapter weights into base model
+merged_model = model.merge_and_unload()
+merged_model.save_pretrained("./merged-model")
+
+# Method 2: Merge multiple adapters (weighted combination)
+from peft import add_weighted_adapter
+
+# Load multiple adapters
+model = PeftModel.from_pretrained(base_model, "adapter1", adapter_name="adapter1")
+model.load_adapter("adapter2", adapter_name="adapter2")
+model.load_adapter("adapter3", adapter_name="adapter3")
+
+# Combine with weights
+model.add_weighted_adapter(
+    adapters=["adapter1", "adapter2", "adapter3"],
+    weights=[0.5, 0.3, 0.2],
+    adapter_name="combined",
+    combination_type="linear"  # or "svd", "cat"
+)
+model.set_adapter("combined")
+```
+
+## DoRA (Weight-Decomposed LoRA)
+
+DoRA improves on LoRA by decomposing weights into magnitude and direction components.
+
+```python
+from peft import LoraConfig
+
+# DoRA configuration
+dora_config = LoraConfig(
+    r=16,
+    lora_alpha=32,
+    target_modules=["q_proj", "k_proj", "v_proj", "o_proj"],
+    lora_dropout=0.05,
+    use_dora=True,  # Enable DoRA
+    task_type=TaskType.CAUSAL_LM
+)
+
+# Training is identical to LoRA
+model = get_peft_model(model, dora_config)
+```
+
+## rsLoRA (Rank-Stabilized LoRA)
+
+Proper scaling for higher ranks:
+
+```python
+from peft import LoraConfig
+
+# rsLoRA for high-rank training
+rslora_config = LoraConfig(
+    r=64,  # Higher rank
+    lora_alpha=64,
+    target_modules=["q_proj", "k_proj", "v_proj", "o_proj"],
+    use_rslora=True,  # Rank-stabilized scaling
+    task_type=TaskType.CAUSAL_LM
+)
+```
+
+## Common Issues and Solutions
+
+### Issue: Loss Not Decreasing
+
+```python
+# Check 1: Verify adapter is training
+for name, param in model.named_parameters():
+    if param.requires_grad:
+        print(f"Training: {name}")
+
+# Check 2: Increase rank or alpha
+config = LoraConfig(r=32, lora_alpha=64, ...)
+
+# Check 3: Reduce learning rate
+training_args = TrainingArguments(learning_rate=1e-4, ...)
+```
+
+### Issue: Out of Memory
+
+```python
+# Solution 1: Use QLoRA
+bnb_config = BitsAndBytesConfig(load_in_4bit=True, ...)
+
+# Solution 2: Enable gradient checkpointing
+model.gradient_checkpointing_enable()
+
+# Solution 3: Reduce batch size, increase gradient accumulation
+training_args = TrainingArguments(
+    per_device_train_batch_size=1,
+    gradient_accumulation_steps=16
+)
+
+# Solution 4: Use 8-bit optimizer
+training_args = TrainingArguments(optim="paged_adamw_8bit")
+```
+
+### Issue: Adapter Not Loading
+
+```python
+# Ensure architecture matches
+from peft import PeftModel, PeftConfig
+
+# Check adapter config
+config = PeftConfig.from_pretrained("path/to/adapter")
+print(f"Base model: {config.base_model_name_or_path}")
+print(f"Target modules: {config.target_modules}")
+
+# Load with correct base model
+base_model = AutoModelForCausalLM.from_pretrained(config.base_model_name_or_path)
+model = PeftModel.from_pretrained(base_model, "path/to/adapter")
+```
+
+## Quick Reference
+
+| Parameter | Typical Range | Effect |
+|-----------|---------------|--------|
+| `r` (rank) | 4-64 | Adapter capacity; higher = more expressive |
+| `lora_alpha` | r to 2*r | Scaling factor; higher = larger updates |
+| `lora_dropout` | 0.0-0.1 | Regularization; increase for small datasets |
+| `learning_rate` | 1e-5 to 3e-4 | LoRA tolerates higher LR than full FT |
+| `target_modules` | attention + MLP | More modules = more capacity + memory |
+
+## Related References
+
+- `hyperparameter-tuning.md` - Learning rate schedules, batch sizes
+- `deployment-optimization.md` - Adapter merging, quantization for inference
+- `dataset-preparation.md` - Training data formatting