@zwave-js/config 10.0.0-beta.1 → 10.0.0-beta.10

package/config/devices/0x010f/fgwpg-121.json

@@ -21,28 +21,30 @@
 		{
 			"#": "3",
 			"label": "Overload",
-			"description": "Overload safety switch",
+			"description": "Turn off the controlled device in case of exceeding the defined power.",
 			"valueSize": 2,
+			"unit": "0.1 W",
 			"minValue": 0,
 			"maxValue": 30000,
 			"defaultValue": 0,
 			"options": [
 				{
-					"label": "Overload Disabled",
+					"label": "Disable",
 					"value": 0
 				}
 			]
 		},
 		{
 			"#": "11",
-			"label": "Power Reporting",
+			"label": "Power Reporting Threshold",
 			"valueSize": 1,
+			"unit": "%",
 			"minValue": 0,
 			"maxValue": 100,
 			"defaultValue": 15,
 			"options": [
 				{
-					"label": "Disables power reporting",
+					"label": "Disable",
 					"value": 0
 				}
 			]
@@ -51,12 +53,13 @@
 			"#": "12",
 			"label": "Energy Reporting Threshold",
 			"valueSize": 2,
+			"unit": "0.01 kWh",
 			"minValue": 0,
 			"maxValue": 500,
 			"defaultValue": 10,
 			"options": [
 				{
-					"label": "Disables energy reporting",
+					"label": "Disable",
 					"value": 0
 				}
 			]
@@ -65,6 +68,7 @@
 			"#": "13",
 			"label": "Power Reporting Interval",
 			"valueSize": 2,
+			"unit": "seconds",
 			"minValue": 0,
 			"maxValue": 32400,
 			"defaultValue": 3600,
@@ -79,6 +83,7 @@
 			"#": "14",
 			"label": "Energy Reporting Interval",
 			"valueSize": 2,
+			"unit": "seconds",
 			"minValue": 0,
 			"maxValue": 32400,
 			"defaultValue": 3600,
@@ -107,50 +112,9 @@
 				}
 			]
 		},
-		{
-			"#": "21",
-			"label": "Up Value",
-			"description": "Upper power threshold",
-			"valueSize": 2,
-			"minValue": 100,
-			"maxValue": 30000,
-			"defaultValue": 500
-		},
-		{
-			"#": "22",
-			"label": "Down value",
-			"description": "Lower power threshold",
-			"valueSize": 2,
-			"minValue": 0,
-			"maxValue": 29900,
-			"defaultValue": 300
-		},
-		{
-			"#": "23",
-			"label": "Controlling",
-			"description": "Controlling 3rd association group devices",
-			"valueSize": 1,
-			"defaultValue": 3,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Power Exceeded",
-					"value": 1
-				},
-				{
-					"label": "Power Dropped",
-					"value": 2
-				},
-				{
-					"label": "Power Dropped or Exceeded",
-					"value": 3
-				}
-			]
-		},
 		{
 			"#": "24",
-			"label": "Switch On",
-			"description": "Command frame sent to devices in 2nd group",
+			"label": "Group 2: Switch On Value",
 			"valueSize": 2,
 			"minValue": 0,
 			"maxValue": 255,
@@ -168,8 +132,7 @@
 		},
 		{
 			"#": "25",
-			"label": "Switch Off",
-			"description": "Command frame sent to devices in 2nd group",
+			"label": "Group 2: Switch Off Value",
 			"valueSize": 2,
 			"minValue": 0,
 			"maxValue": 255,
@@ -185,10 +148,48 @@
 				}
 			]
 		},
+		{
+			"#": "23",
+			"label": "Group 3: Control Mode",
+			"description": "When to send a command to devices in the association group 3.",
+			"valueSize": 1,
+			"defaultValue": 3,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Power usage above upper threshold",
+					"value": 1
+				},
+				{
+					"label": "Power usage below lower threshold",
+					"value": 2
+				},
+				{
+					"label": "Both",
+					"value": 3
+				}
+			]
+		},
+		{
+			"#": "21",
+			"label": "Group 3: Upper Power Threshold",
+			"valueSize": 2,
+			"minValue": 100,
+			"maxValue": 30000,
+			"defaultValue": 500
+		},
+		{
+			"#": "22",
+			"label": "Group 3: Lower Power Threshold",
+			"valueSize": 2,
+			"minValue": 0,
+			"maxValue": 29900,
+			"defaultValue": 300
+		},
 		{
 			"#": "26",
-			"label": "Threshold Up",
-			"description": "Command frame sent to the devices in 3rd group",
+			"label": "Group 3: Upper Threshold Command Value",
+			"description": "Which value to send when the power usage is above the upper threshold.",
 			"valueSize": 2,
 			"minValue": 0,
 			"maxValue": 255,
@@ -206,8 +207,8 @@
 		},
 		{
 			"#": "27",
-			"label": "Threshold Down",
-			"description": "Command frame sent to the devices in 3rd group",
+			"label": "Group 3: Lower Threshold Command Value",
+			"description": "Which value to send when the power usage is below the lower threshold.",
 			"valueSize": 2,
 			"minValue": 0,
 			"maxValue": 255,
@@ -224,42 +225,40 @@
 			]
 		},
 		{
-			"#": "30",
-			"label": "Active Alarms",
-			"description": "Network alarms to which the Wall Plug will respond",
-			"valueSize": 1,
-			"defaultValue": 63,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "General",
-					"value": 1
-				},
-				{
-					"label": "Smoke",
-					"value": 2
-				},
-				{
-					"label": "Carbon Monoxide",
-					"value": 4
-				},
-				{
-					"label": "Carbon Dioxide",
-					"value": 8
-				},
-				{
-					"label": "High Temperature",
-					"value": 16
-				},
-				{
-					"label": "Flood",
-					"value": 32
-				},
-				{
-					"label": "All Alarms (default)",
-					"value": 63
-				}
-			]
+			"#": "30[0x01]",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Respond To Alarms: General",
+			"defaultValue": 1
+		},
+		{
+			"#": "30[0x02]",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Respond To Alarms: Smoke",
+			"defaultValue": 1
+		},
+		{
+			"#": "30[0x04]",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Respond To Alarms: Carbon Monoxide",
+			"defaultValue": 1
+		},
+		{
+			"#": "30[0x08]",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Respond To Alarms: Carbon Dioxide",
+			"defaultValue": 1
+		},
+		{
+			"#": "30[0x10]",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Respond To Alarms: High Temperature",
+			"defaultValue": 1
+		},
+		{
+			"#": "30[0x20]",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Respond To Alarms: Flood",
+			"defaultValue": 1
 		},
 		{
 			"#": "31",
@@ -286,32 +285,31 @@
 		},
 		{
 			"#": "32",
-			"label": "Alarm state duration",
-			"description": "Specifies the duration of the alarm state",
+			"label": "Alarm Duration",
 			"valueSize": 2,
+			"unit": "seconds",
 			"minValue": 1,
 			"maxValue": 32400,
 			"defaultValue": 600
 		},
 		{
 			"#": "40",
-			"label": "Power load for violet color",
-			"description": "Maximum active power to flash the LED frame Violet",
+			"label": "LED Indicator: Power Threshold For Violet Color",
 			"valueSize": 2,
+			"unit": "0.1 W",
 			"minValue": 1000,
 			"maxValue": 30000,
 			"defaultValue": 30000
 		},
 		{
 			"#": "41",
-			"label": "LED frame color On",
-			"description": "LED frame color when controlled device is on",
+			"label": "LED Indicator: Color When Load On",
 			"valueSize": 1,
 			"defaultValue": 1,
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "Disable Illumination",
+					"label": "LED Off",
 					"value": 0
 				},
 				{
@@ -354,14 +352,13 @@
 		},
 		{
 			"#": "42",
-			"label": "LED frame color Off",
-			"description": "LED frame color when controlled device is off",
+			"label": "LED Indicator: Color When Load Off",
 			"valueSize": 1,
 			"defaultValue": 0,
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "Disable Illumination",
+					"label": "LED Off",
 					"value": 0
 				},
 				{
@@ -400,14 +397,13 @@
 		},
 		{
 			"#": "43",
-			"label": "LED frame color Z-Wave",
-			"description": "Z-Wave alarm illumination",
+			"label": "LED Indicator: Color During Alarm",
 			"valueSize": 1,
 			"defaultValue": 2,
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "Disable Illumination",
+					"label": "LED Off",
 					"value": 0
 				},
 				{

package/config/devices/0x0115/kfob.json

@@ -245,7 +245,7 @@
 		{
 			"#": "20",
 			"label": "Typical click timeout",
-			"description": "Typical time used to differenciate click, hold and double clicks in 10ms units",
+			"description": "Typical time used to differentiate click, hold and double clicks in 10ms units",
 			"valueSize": 1,
 			"minValue": 0,
 			"maxValue": 255,

package/config/devices/0x0115/v3.json

@@ -186,7 +186,7 @@
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "Comfirm OTA",
+					"label": "Confirm OTA",
 					"value": 1
 				}
 			]

package/config/devices/0x0115/zme_ft.json

@@ -110,7 +110,7 @@
 		{
 			"#": "10",
 			"label": "Typical click timeout",
-			"description": "Typical time used to differenciate click from hold",
+			"description": "Typical time used to differentiate click from hold",
 			"unit": "in 10ms",
 			"valueSize": 1,
 			"minValue": 1,

package/config/devices/0x0116/hac01.json

@@ -2,7 +2,7 @@
 	"manufacturer": "Chromagic Technologies Corporation",
 	"manufacturerId": "0x0116",
 	"label": "HAC01",
-	"description": "Chromagic Z-Wave Remote Botton (EU)",
+	"description": "Chromagic Z-Wave Remote Button (EU)",
 	"devices": [
 		{
 			"productType": "0x0010",

package/config/devices/0x0116/itemp.json

@@ -50,7 +50,7 @@
 		{
 			"#": "2",
 			"label": "Command sent on external dry contact",
-			"description": "Configure what te external contact sends when trigger",
+			"description": "Configure what the external contact sends when triggered",
 			"valueSize": 1,
 			"defaultValue": 0,
 			"unsigned": true,

package/config/devices/0x0118/tz06.json

@@ -118,7 +118,7 @@
 					"value": 0
 				},
 				{
-					"label": "Switch Ingore",
+					"label": "Switch Ignore",
 					"value": 1
 				},
 				{

package/config/devices/0x0118/tz36d.json

@@ -67,7 +67,7 @@
 					"value": 0
 				},
 				{
-					"label": "Switch top and buttom button.",
+					"label": "Switch top and bottom button.",
 					"value": 1
 				}
 			]

package/config/devices/0x0118/tz65d.json

@@ -89,7 +89,7 @@
 		{
 			"#": "4",
 			"label": "Invert Switch",
-			"description": "To change the top of the switch to off and the botton to on",
+			"description": "To change the top of the switch to off and the button to on",
 			"valueSize": 1,
 			"defaultValue": 0,
 			"allowManualEntry": false,

package/config/devices/0x0118/tz66d.json

@@ -91,7 +91,7 @@
 		{
 			"#": "4",
 			"label": "Invert Switch",
-			"description": "To change the top of the switch to off and the botton to on",
+			"description": "To change the top of the switch to off and the button to on",
 			"valueSize": 1,
 			"defaultValue": 0,
 			"allowManualEntry": false,

package/config/devices/0x0118/tz74.json

@@ -35,7 +35,7 @@
 		{
 			"#": "2",
 			"label": "Memory Function",
-			"description": "Default with memory: the socket staus is same as before when power is on",
+			"description": "Default with memory: the socket status is same as before when power is on",
 			"valueSize": 1,
 			"defaultValue": 1,
 			"allowManualEntry": false,

package/config/devices/0x0118/tz75.json

@@ -34,7 +34,7 @@
 		},
 		{
 			"#": "3",
-			"label": "Treshold of watt for load caution",
+			"label": "Threshold of watt for load caution",
 			"unit": "W",
 			"valueSize": 2,
 			"minValue": 10,
@@ -43,7 +43,7 @@
 		},
 		{
 			"#": "4",
-			"label": "Treshold of KWH for load caution",
+			"label": "Threshold of KWH for load caution",
 			"unit": "KWH",
 			"valueSize": 2,
 			"minValue": 0,

package/config/devices/0x011b/eedomus.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "You can proceed to a Z-Wave chip factory reset in order to do a fresh installation of your network.\n\nWhen doing that the Home ID of your network will change and your devices need to be excluded (In order to be reseted) and included again.\n\nTo perform a factory reset, click on :\nConfiguration / Add or remove a device / Advanced Z-Wave functions / Reset Z-Wave controller\n\nIf this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. \nIf this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable",
+		"reset": "You can proceed to a Z-Wave chip factory reset in order to do a fresh installation of your network.\n\nWhen doing that the Home ID of your network will change and your devices need to be excluded (in order to be reset) and included again.\n\nTo perform a factory reset, click on :\nConfiguration / Add or remove a device / Advanced Z-Wave functions / Reset Z-Wave controller\n\nIf this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. \nIf this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3582/eedomus_guide_en.pdf"
 	}
 }

package/config/devices/0x0131/ne-nas-pd01z.json

@@ -17,7 +17,7 @@
 		{
 			"#": "1",
 			"label": "Sensitivity level",
-			"description": "8 = Highest sensitivity, 255 = lowest sesitivity",
+			"description": "8 = Highest sensitivity, 255 = lowest sensitivity",
 			"valueSize": 1,
 			"minValue": 8,
 			"maxValue": 255,

package/config/devices/0x013c/psp05.json

@@ -62,7 +62,7 @@
 		},
 		{
 			"#": "10",
-			"label": "Batery level reporting interval",
+			"label": "Battery level reporting interval",
 			"description": "How frequently battery status should be reported",
 			"valueSize": 1,
 			"minValue": 0,

package/config/devices/0x013c/pst02-a-br.json

@@ -250,7 +250,7 @@
 		},
 		{
 			"#": "11",
-			"label": "Auto Report Door/Windo W State",
+			"label": "Auto Report Door/Window State",
 			"description": "The default value is 12. the tick time can setting by the configuration no.20",
 			"valueSize": 1,
 			"minValue": 0,

package/config/devices/0x0149/wps104.json

@@ -85,7 +85,7 @@
 		{
 			"#": "32",
 			"label": "Next State",
-			"description": "Defines the next state if an overcurrent event occurr",
+			"description": "Defines the next state if an overcurrent event occur",
 			"valueSize": 1,
 			"defaultValue": 0,
 			"allowManualEntry": false,

package/config/devices/0x014d/ibdk-01.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "Please excute this reset procedure only when the primary controller is missing or inoperable.\n1. Open battery cover.\n2. Press and hold the button there\n3. LED is turned on after 5 seconds. Keep holding.\n4. LET starts blinking after 10 seconds.\n5. Release the button when the LED blinks",
+		"reset": "Please execute this reset procedure only when the primary controller is missing or inoperable.\n1. Open battery cover.\n2. Press and hold the button there\n3. LED is turned on after 5 seconds. Keep holding.\n4. LET starts blinking after 10 seconds.\n5. Release the button when the LED blinks",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3209/UVA01A_Manual_20190111.pdf"
 	}
 }

package/config/devices/0x014f/wf00z.json

@@ -17,7 +17,7 @@
 	"metadata": {
 		"inclusion": "For “Inclusion” in (adding to) a network: Put the Z-Wave™ Interface Controller into “inclusion” mode, and following its instruction to add the ZF5201 to the controller. To get in the “inclusion” mode, the distance between sensor and controller is suggested to be in one meter. Press the program switch of ZF5201 for 1 second at least. The LED on the ZF5201 should go solid, if not, please try again",
 		"exclusion": "For “Exclusion” from (removing from) a network: Put the Z-Wave™ Interface Controller into “exclusion” mode, and following its instruction to delete the ZF5201 from your controller. Press the program switch of ZF5201 for 1 second at least to be excluded",
-		"reset": "Triger the Water Sensor 10 times within 10 sec. The device will send command class of device reset to controller and back to the factory default state. Please use this procedure only in the event that the network primary controller is missing or otherwise inoperable",
+		"reset": "Trigger the Water Sensor 10 times within 10 sec. The device will send command class of device reset to controller and back to the factory default state. Please use this procedure only in the event that the network primary controller is missing or otherwise inoperable",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1590/10008416X4%20WF00Z-1%20Instructions.pdf"
 	}
 }

package/config/devices/0x0154/123665.json

@@ -84,7 +84,7 @@
 		},
 		{
 			"#": "11",
-			"label": "Disable Switching Funktion",
+			"label": "Disable Switching Function",
 			"valueSize": 1,
 			"defaultValue": 1,
 			"allowManualEntry": false,

package/config/devices/0x0159/zmnhaa.json

@@ -60,11 +60,11 @@
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "NO (normaly open) input type",
+					"label": "NO (normally open) input type",
 					"value": 0
 				},
 				{
-					"label": "NC (normaly close) input type",
+					"label": "NC (normally close) input type",
 					"value": 1
 				}
 			]
@@ -78,11 +78,11 @@
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "NO (normaly open) input type",
+					"label": "NO (normally open) input type",
 					"value": 0
 				},
 				{
-					"label": "NC (normaly close) input type",
+					"label": "NC (normally close) input type",
 					"value": 1
 				}
 			]

package/config/devices/0x0159/zmnhad.json

@@ -41,11 +41,11 @@
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "NO (normaly open) input type",
+					"label": "NO (normally open) input type",
 					"value": 0
 				},
 				{
-					"label": "NC (normaly close) input type",
+					"label": "NC (normally close) input type",
 					"value": 1
 				}
 			]
@@ -59,11 +59,11 @@
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "NO (normaly open) input type",
+					"label": "NO (normally open) input type",
 					"value": 0
 				},
 				{
-					"label": "NC (normaly close) input type",
+					"label": "NC (normally close) input type",
 					"value": 1
 				}
 			]

package/config/devices/0x0159/zmnhkd.json

@@ -140,7 +140,7 @@
 					"value": 2000
 				},
 				{
-					"label": "Input I2 doesnt influence on the Heat/Cool process",
+					"label": "Input I2 doesn't influence on the Heat/Cool process",
 					"value": 32767
 				}
 			]

package/config/devices/0x0159/zmnhld.json

@@ -174,7 +174,7 @@
 					"value": 2000
 				},
 				{
-					"label": "Input I2 doesnt influence on the Heat/Cool process",
+					"label": "Input I2 doesn't influence on the Heat/Cool process",
 					"value": 32767
 				}
 			]

package/config/devices/0x0159/zmnhnd.json

@@ -41,11 +41,11 @@
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "NO (normaly open) input type",
+					"label": "NO (normally open) input type",
 					"value": 0
 				},
 				{
-					"label": "NC (normaly close) input type",
+					"label": "NC (normally close) input type",
 					"value": 1
 				}
 			]

package/config/devices/0x0159/zmnhtd.json

@@ -121,7 +121,7 @@
 		},
 		{
 			"#": "42",
-			"label": "Power (W) Reporting Interal",
+			"label": "Power (W) Reporting Internal",
 			"description": "Allowable range: 60-32535",
 			"unit": "seconds",
 			"valueSize": 2,

package/config/devices/0x015b/lap255u.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "Run Z-Wave Certification Application in Setting, Select \"Things\" on the left menu, select \"bridge\" on the right list, andd Select factoryReset on the right list, push Send button on the Pop up",
+		"reset": "Run Z-Wave Certification Application in Setting, Select \"Things\" on the left menu, select \"bridge\" on the right list, and Select factoryReset on the right list, push Send button on the Pop up",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1453/ZwaveCertiApp_Guide_0902_new.pdf"
 	}
 }