@zwave-js/config 10.0.0-beta.1 → 10.0.0-beta.10

package/config/devices/0x0271/rs_led_d2_z-wave.json

@@ -16,137 +16,59 @@
 	"paramInformation": [
 		{
 			"#": "1",
-			"label": "Time [s]",
-			"description": "Duration of light after motion detection.",
-			"unit": "seconds",
-			"valueSize": 2,
-			"minValue": 5,
-			"maxValue": 900,
-			"defaultValue": 180
+			"$import": "templates/steinel_template.json#motion_light_duration"
 		},
 		{
 			"#": "2",
-			"label": "Light threshold [lx]",
-			"description": "LIGHT",
-			"valueSize": 2,
-			"minValue": 2,
-			"maxValue": 2000,
-			"defaultValue": 2000
+			"$import": "templates/steinel_template.json#light_threshold"
 		},
 		{
 			"#": "4",
-			"label": "Motion Radar Range [cm]",
-			"description": "RANGE",
-			"unit": "cm",
-			"valueSize": 2,
-			"minValue": 100,
-			"maxValue": 500,
-			"defaultValue": 500
+			"$import": "templates/steinel_template.json#motion_sensor_range"
 		},
 		{
 			"#": "5",
-			"label": "Motion Radar Sensitivity [%]",
-			"description": "SENSITIVITY",
-			"valueSize": 1,
-			"minValue": 2,
-			"maxValue": 100,
-			"defaultValue": 100
+			"$import": "templates/steinel_template.json#motion_sensor_sensitivity"
 		},
 		{
 			"#": "6",
-			"label": "Brightness measuring interval [min]",
-			"description": "(only SLAMP)",
-			"valueSize": 1,
-			"minValue": 5,
-			"maxValue": 120,
-			"defaultValue": 0
+			"$import": "templates/steinel_template.json#brightness_measuring_interval"
 		},
 		{
 			"#": "8",
-			"label": "Use external Ambient Light value",
-			"description": "GLOBAL_LIGHT",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 1,
-			"defaultValue": 1
+			"$import": "templates/steinel_template.json#external_light_sensor"
 		},
 		{
-			"#": "9",
-			"label": "Disable local control",
-			"description": "SLAVE_MODE",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 4,
-			"defaultValue": 2
+			"#": "9[0x07]",
+			"$import": "templates/steinel_template.json#light_behavior"
 		},
 		{
 			"#": "10",
-			"label": "Off behaviour (timeout)",
-			"description": "OFF_BEHAVIOUR",
-			"valueSize": 2,
-			"minValue": 0,
-			"maxValue": 255,
-			"defaultValue": 10,
-			"options": [
-				{
-					"label": "Lamp/relay is switched off for TIME (cfg 1)",
-					"value": 255
-				}
-			]
+			"$import": "templates/steinel_template.json#off_command_duration"
 		},
 		{
 			"#": "11",
-			"label": "On behaviour (timeout)",
-			"description": "ON_BEHAVIOUR",
-			"valueSize": 2,
-			"minValue": 2,
-			"maxValue": 209,
-			"defaultValue": 255
+			"$import": "templates/steinel_template.json#on_command_duration"
 		},
 		{
 			"#": "12",
-			"label": "On behaviour time over (timeout)",
-			"description": "ON_TIME_OVER",
-			"valueSize": 2,
-			"minValue": 0,
-			"maxValue": 209,
-			"defaultValue": 204
+			"$import": "templates/steinel_template.json#motion_wait_limit"
 		},
 		{
 			"#": "13",
-			"label": "Sequence On-Off behaviour (timeout)",
-			"description": "ON_OFF_ BEHAVIOUR",
-			"valueSize": 2,
-			"minValue": 0,
-			"maxValue": 209,
-			"defaultValue": 204
+			"$import": "templates/steinel_template.json#on_off_sequence_off_duration"
 		},
 		{
 			"#": "14",
-			"label": "Sequence Off-On behaviour (timeout)",
-			"description": "OFF_ON_ BEHAVIOUR",
-			"valueSize": 2,
-			"minValue": 0,
-			"maxValue": 209,
-			"defaultValue": 204
+			"$import": "templates/steinel_template.json#off_on_sequence_on_duration"
 		},
 		{
 			"#": "15",
-			"label": "Sequence timing",
-			"description": "SEQUENCE_TIME",
-			"valueSize": 1,
-			"minValue": 10,
-			"maxValue": 50,
-			"defaultValue": 10
+			"$import": "templates/steinel_template.json#sequence_timing"
 		},
 		{
 			"#": "16",
-			"label": "Motion Off behaviour (timeout)",
-			"description": "MOTION_ DISABLE",
-			"valueSize": 2,
-			"minValue": 2,
-			"maxValue": 209,
-			"defaultValue": 0
+			"$import": "templates/steinel_template.json#command_motion_disable_timeout"
 		}
 	]
 }

package/config/devices/0x0271/templates/steinel_template.json

@@ -0,0 +1,237 @@
+{
+	"motion_light_duration": {
+		"label": "Light Duration After Motion",
+		"valueSize": 2,
+		"unit": "seconds",
+		"minValue": 5,
+		"maxValue": 900,
+		"defaultValue": 180
+	},
+	"light_threshold": {
+		"label": "Light Threshold",
+		"description": "Allowable range: 0, 2-2000. Moving the potentiometer overwrites the current setting.",
+		"valueSize": 2,
+		"unit": "lux",
+		"minValue": 0,
+		"maxValue": 2000,
+		"defaultValue": 2000,
+		"options": [
+			{
+				"label": "Execute learn sequence",
+				"value": 0
+			},
+			{
+				"label": "Disable threshold (always night)",
+				"value": 2000
+			}
+		]
+	},
+	"night_dim_mode": {
+		"label": "Night Dim Mode Duration",
+		"description": "Allowable range: 0-60, 255. External control overrides this setting.",
+		"valueSize": 1,
+		"unit": "minutes",
+		"minValue": 0,
+		"maxValue": 255,
+		"defaultValue": 0,
+		"unsigned": true,
+		"options": [
+			{
+				"label": "Disable, light off completely",
+				"value": 0
+			},
+			{
+				"label": "Whole night",
+				"value": 255
+			}
+		]
+	},
+	"motion_sensor_range": {
+		"label": "Motion Sensor Range",
+		"description": "Moving the potentiometer overwrites the current setting.",
+		"unit": "cm",
+		"valueSize": 2,
+		"minValue": 100,
+		"maxValue": 500,
+		"defaultValue": 500
+	},
+	"motion_sensor_sensitivity": {
+		"label": "Motion Sensor Sensitivity",
+		"description": "Moving the potentiometer overwrites the current setting.",
+		"valueSize": 1,
+		"unit": "%",
+		"minValue": 2,
+		"maxValue": 100,
+		"defaultValue": 100
+	},
+	"brightness_measuring_interval": {
+		"label": "Brightness Measuring Interval",
+		"description": "Lamp switches off briefly and measures the ambient light. Allowable range: 5-120.",
+		"valueSize": 1,
+		"unit": "minutes",
+		"minValue": 0,
+		"maxValue": 120,
+		"defaultValue": 0,
+		"options": [
+			{
+				"label": "Disable",
+				"value": 0
+			}
+		]
+	},
+	"external_light_sensor": {
+		"$import": "~/templates/master_template.json#base_enable_disable",
+		"label": "External Ambient Light Sensor",
+		"description": "Measurements from associated Z-Wave light sensors are preferred if not older than 30 minutes.",
+		"defaultValue": 1
+	},
+	"light_behavior": {
+		// Meant to be used with the bitmask 0x07
+		"label": "Light Behavior",
+		"valueSize": 1,
+		"minValue": 0,
+		"maxValue": 4,
+		"defaultValue": 2,
+		"unsigned": true,
+		"allowManualEntry": false,
+		"options": [
+			{
+				"label": "Normal mode",
+				"value": 0
+			},
+			{
+				"label": "External control",
+				"value": 1
+			},
+			{
+				"label": "Normal mode + gateway check",
+				"value": 2
+			},
+			{
+				"label": "External control + gateway check",
+				"value": 3
+			},
+			{
+				"label": "Permanently on",
+				"value": 4
+			}
+		]
+	},
+	"off_command_duration": {
+		"label": "Z-Wave Off Command: Turn Off Duration",
+		"description": "On motion detection, light turns off for the configured duration: 1...100 = seconds, 101...200 = minutes (minus 100), 201...209 = hours (minus 200)",
+		"valueSize": 2,
+		"minValue": 0,
+		"maxValue": 255,
+		"defaultValue": 10,
+		"options": [
+			{
+				"label": "Turn off immediately, until motion detected",
+				"value": 0
+			},
+			{
+				"label": "Turn off immediately for duration of param 1 (Light Duration After Motion) or until motion detected",
+				"value": 255
+			}
+		]
+	},
+	"on_command_duration": {
+		"label": "Z-Wave On Command: Turn On Duration",
+		"description": "Light turns on for the configured duration, then waits for motion to return to normal operation: 1...100 = seconds, 101...200 = minutes (minus 100), 201...209 = hours (minus 200)",
+		"valueSize": 2,
+		"minValue": 0,
+		"maxValue": 255,
+		"defaultValue": 255,
+		"options": [
+			{
+				"label": "Turn on, wait for motion immediately",
+				"value": 0
+			},
+			{
+				"label": "Turn on immediately for duration of param 1 (Light Duration After Motion) or until motion detected",
+				"value": 255
+			}
+		]
+	},
+	"motion_wait_limit": {
+		"label": "Z-Wave On / Off-On: Motion Wait Time Limit",
+		"description": "How long to wait for motion after the configured duration before returning to normal operation to prevent staying on forever: 1...100 = seconds, 101...200 = minutes (minus 100), 201...209 = hours (minus 200)",
+		"valueSize": 2,
+		"minValue": 0,
+		"maxValue": 255,
+		"defaultValue": 204,
+		"options": [
+			{
+				"label": "Do not wait for motion",
+				"value": 0
+			},
+			{
+				"label": "Wait for motion indefinitely",
+				"value": 255
+			}
+		]
+	},
+	"on_off_sequence_off_duration": {
+		"label": "Z-Wave On-Off Sequence: Turn Off Duration",
+		"description": "On motion detection, light turns off for the configured duration: 1...100 = seconds, 101...200 = minutes (minus 100), 201...209 = hours (minus 200)",
+		"valueSize": 2,
+		"minValue": 0,
+		"maxValue": 255,
+		"defaultValue": 204,
+		"options": [
+			{
+				"label": "Immediately, until motion detected",
+				"value": 0
+			},
+			{
+				"label": "Ignore sequence, treat like off command",
+				"value": 255
+			}
+		]
+	},
+	"off_on_sequence_on_duration": {
+		"label": "Z-Wave Off-On Sequence: Turn On Duration",
+		"description": "Light turns on for the configured duration, then waits for motion to return to normal operation: 1...100 = seconds, 101...200 = minutes (minus 100), 201...209 = hours (minus 200)",
+		"valueSize": 2,
+		"minValue": 0,
+		"maxValue": 255,
+		"defaultValue": 204,
+		"options": [
+			{
+				"label": "Turn on, wait for motion immediately",
+				"value": 0
+			},
+			{
+				"label": "Ignore sequence, treat like on command",
+				"value": 255
+			}
+		]
+	},
+	"sequence_timing": {
+		"label": "Sequence Timing",
+		"description": "Maximum delay between on-off or off-on commands to treat as a sequence",
+		"valueSize": 1,
+		"unit": "0.1 s",
+		"minValue": 10,
+		"maxValue": 50,
+		"defaultValue": 10
+	},
+	"command_motion_disable_timeout": {
+		"label": "Motion Sensor Disable Timeout",
+		"description": "How long to disable internal motion sensor after Basic Set command to motion endpoint: 1...100 = seconds, 101...200 = minutes (minus 100), 201...209 = hours (minus 200)",
+		"valueSize": 2,
+		"minValue": 0,
+		"maxValue": 255,
+		"defaultValue": 0,
+		"options": [
+			{
+				"label": "Ignore command, sensor permanently enabled",
+				"value": 0
+			},
+			{
+				"label": "Ignore command, sensor permanently disabled",
+				"value": 255
+			}
+		]
+	}
+}

package/config/devices/0x0271/xled_home_2.json

@@ -16,250 +16,55 @@
 	"paramInformation": [
 		{
 			"#": "1",
-			"label": "Light Duration After Motion",
-			"valueSize": 2,
-			"unit": "seconds",
-			"minValue": 5,
-			"maxValue": 900,
-			"defaultValue": 180
+			"$import": "templates/steinel_template.json#motion_light_duration"
 		},
 		{
 			"#": "2",
-			"label": "Light Threshold",
-			"description": "Allowable Range: 2-2000. Moving the potentiometer overwrites the current setting.",
-			"valueSize": 2,
-			"unit": "lux",
-			"minValue": 0,
-			"maxValue": 2000,
-			"defaultValue": 2000,
-			"options": [
-				{
-					"label": "Execute learn sequence",
-					"value": 0
-				}
-			]
+			"$import": "templates/steinel_template.json#light_threshold"
 		},
 		{
 			"#": "5",
-			"label": "Motion Sensor Sensitivity",
-			"description": "Moving the potentiometer overwrites the current setting.",
-			"valueSize": 1,
-			"unit": "%",
-			"minValue": 2,
-			"maxValue": 100,
-			"defaultValue": 100
+			"$import": "templates/steinel_template.json#motion_sensor_sensitivity"
 		},
 		{
 			"#": "6",
-			"label": "Brightness Measuring Interval",
-			"description": "Lamp switches off shortly and measures the ambient light.",
-			"valueSize": 1,
-			"unit": "minutes",
-			"minValue": 0,
-			"maxValue": 120,
-			"defaultValue": 0,
-			"options": [
-				{
-					"label": "Disable",
-					"value": 0
-				}
-			]
+			"$import": "templates/steinel_template.json#brightness_measuring_interval"
 		},
 		{
 			"#": "8",
-			"label": "External Ambient Light Sensor",
-			"description": "Measurements from associated Z-Wave light sensors are preferred if not older than 30 minutes.",
-			"valueSize": 1,
-			"defaultValue": 1,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Disable",
-					"value": 0
-				},
-				{
-					"label": "Enable",
-					"value": 1
-				}
-			]
+			"$import": "templates/steinel_template.json#external_light_sensor"
 		},
 		{
-			"#": "9[0x01]",
-			"label": "External Control",
-			"description": "When enabled, the lamp is controlled externally via Z-Wave and internal sensors are not used.",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Disable",
-					"value": 0
-				},
-				{
-					"label": "Enable",
-					"value": 1
-				}
-			]
-		},
-		{
-			"#": "9[0x02]",
-			"label": "Gateway Check",
-			"description": "External Control disabled: Lamp signalizes failure to reach the gateway. External Control enabled: Lamp falls back to normal mode after gateway could not be reached repeatedly.",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Disable",
-					"value": 0
-				},
-				{
-					"label": "Enable",
-					"value": 1
-				}
-			]
-		},
-		{
-			"#": "9[0x04]",
-			"label": "Permanently On",
-			"description": "When enabled, overrides the External Control and Gateway Check parameters",
-			"valueSize": 1,
-			"defaultValue": 0,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Disable",
-					"value": 0
-				},
-				{
-					"label": "Enable",
-					"value": 1
-				}
-			]
+			"#": "9[0x07]",
+			"$import": "templates/steinel_template.json#light_behavior"
 		},
 		{
 			"#": "10",
-			"label": "Z-Wave Off Command: Turn Off Duration",
-			"description": "On motion detection, light turns off for the configured duration: 1...100 = seconds, 101...200 = minutes (minus 100), 201...209 = hours (minus 200)",
-			"valueSize": 2,
-			"minValue": 0,
-			"maxValue": 255,
-			"defaultValue": 10,
-			"options": [
-				{
-					"label": "Turn off immediately, until motion detected",
-					"value": 0
-				},
-				{
-					"label": "Turn off immediately for duration of param 1 (Light Duration After Motion) or until motion detected",
-					"value": 255
-				}
-			]
+			"$import": "templates/steinel_template.json#off_command_duration"
 		},
 		{
 			"#": "11",
-			"label": "Z-Wave On Command: Turn On Duration",
-			"description": "Light turns on for the configured duration, then waits for motion to return to normal operation: 1...100 = seconds, 101...200 = minutes (minus 100), 201...209 = hours (minus 200)",
-			"valueSize": 2,
-			"minValue": 0,
-			"maxValue": 255,
-			"defaultValue": 255,
-			"options": [
-				{
-					"label": "Turn on, wait for motion immediately",
-					"value": 0
-				},
-				{
-					"label": "Turn on immediately for duration of param 1 (Light Duration After Motion) or until motion detected",
-					"value": 255
-				}
-			]
+			"$import": "templates/steinel_template.json#on_command_duration"
 		},
 		{
 			"#": "12",
-			"label": "Z-Wave On / Off-On: Motion Wait Time Limit",
-			"description": "How long to wait for motion after the configured duration before returning to normal operation to prevent staying on forever: 1...100 = seconds, 101...200 = minutes (minus 100), 201...209 = hours (minus 200)",
-			"valueSize": 2,
-			"minValue": 0,
-			"maxValue": 255,
-			"defaultValue": 204,
-			"options": [
-				{
-					"label": "Do not wait for motion",
-					"value": 0
-				},
-				{
-					"label": "Wait for motion indefinitely",
-					"value": 255
-				}
-			]
+			"$import": "templates/steinel_template.json#motion_wait_limit"
 		},
 		{
 			"#": "13",
-			"label": "Z-Wave On-Off Sequence: Turn Off Duration",
-			"description": "On motion detection, light turns off for the configured duration: 1...100 = seconds, 101...200 = minutes (minus 100), 201...209 = hours (minus 200)",
-			"valueSize": 2,
-			"minValue": 0,
-			"maxValue": 255,
-			"defaultValue": 204,
-			"options": [
-				{
-					"label": "Immediately, until motion detected",
-					"value": 0
-				},
-				{
-					"label": "Ignore sequence, treat like off command",
-					"value": 255
-				}
-			]
+			"$import": "templates/steinel_template.json#on_off_sequence_off_duration"
 		},
 		{
 			"#": "14",
-			"label": "Z-Wave Off-On Sequence: Turn On Duration",
-			"description": "Light turns on for the configured duration, then waits for motion to return to normal operation: 1...100 = seconds, 101...200 = minutes (minus 100), 201...209 = hours (minus 200)",
-			"valueSize": 2,
-			"minValue": 0,
-			"maxValue": 255,
-			"defaultValue": 204,
-			"options": [
-				{
-					"label": "Turn on, wait for motion immediately",
-					"value": 0
-				},
-				{
-					"label": "Ignore sequence, treat like on command",
-					"value": 255
-				}
-			]
+			"$import": "templates/steinel_template.json#off_on_sequence_on_duration"
 		},
 		{
 			"#": "15",
-			"label": "Sequence Timing",
-			"description": "Maximum delay between on-off or off-on commands to treat as a sequence",
-			"valueSize": 1,
-			"unit": "0.1 s",
-			"minValue": 10,
-			"maxValue": 50,
-			"defaultValue": 10
+			"$import": "templates/steinel_template.json#sequence_timing"
 		},
 		{
 			"#": "16",
-			"label": "Motion Sensor Disable Timeout",
-			"description": "How long to disable internal motion sensor after Basic Set command to motion endpoint: 1...100 = seconds, 101...200 = minutes (minus 100), 201...209 = hours (minus 200)",
-			"valueSize": 2,
-			"minValue": 0,
-			"maxValue": 255,
-			"defaultValue": 0,
-			"options": [
-				{
-					"label": "Ignore command, sensor permanently enabled",
-					"value": 0
-				},
-				{
-					"label": "Ignore command, sensor permanently disabled",
-					"value": 255
-				}
-			]
+			"$import": "templates/steinel_template.json#command_motion_disable_timeout"
 		}
 	]
 }