@zwave-js/config 10.0.0-beta.1 → 10.0.0-beta.10

package/config/devices/0x015f/mh-c421.json

@@ -147,7 +147,7 @@
 					"value": 0
 				},
 				{
-					"label": "Toogle (2-state switches)",
+					"label": "Toggle (2-state switches)",
 					"value": 1
 				}
 			]

package/config/devices/0x0165/msp-3-1-x1.json

@@ -256,7 +256,7 @@
 		{
 			"#": "24",
 			"label": "Metering Heartbeat",
-			"description": "Reporting intervall for power and energy to lifeline.",
+			"description": "Reporting interval for power and energy to lifeline.",
 			"unit": "s",
 			"valueSize": 2,
 			"minValue": 0,

package/config/devices/0x016a/ft098-k55.json

@@ -241,7 +241,7 @@
 		},
 		{
 			"#": "80",
-			"label": "To Set Whcih Notification Can Be Sent to The Associated Devices (group 1) When The State of LED Bulb is Changed",
+			"label": "To Set Which Notification Can Be Sent to The Associated Devices (group 1) When The State of LED Bulb is Changed",
 			"valueSize": 1,
 			"defaultValue": 1,
 			"unsigned": true,

package/config/devices/0x0171/wbh-hg2.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "In the WeBeHome portal:\n- Open the Z-Wave module configuration page\n- Press the \"Start\" button on the section \"Reset this Home Gateway Z-Wave network to default settings\"\n\nNotice: \nIt is recommended to use Reset only when the primary controller is missing or inoperable. If this Home Gateway is the primary controller for your Z-Wave network a Reset will make all your Z-Wave accessories beeing orphan. After a Reset it is necessary to exclude (or reset) all accessories and then re-include them.\n\nIf this Home Gateway is used as a secondary controller, use this function to make it leave the Z-Wave network",
+		"reset": "In the WeBeHome portal:\n- Open the Z-Wave module configuration page\n- Press the \"Start\" button on the section \"Reset this Home Gateway Z-Wave network to default settings\"\n\nNotice: \nIt is recommended to use Reset only when the primary controller is missing or inoperable. If this Home Gateway is the primary controller for your Z-Wave network a Reset will make all your Z-Wave accessories being orphan. After a Reset it is necessary to exclude (or reset) all accessories and then re-include them.\n\nIf this Home Gateway is used as a secondary controller, use this function to make it leave the Z-Wave network",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2438/Quick%20Start%20Guide%20WeBeHome%20Home%20Gateway%20HG2Plus.pdf"
 	}
 }

package/config/devices/0x0175/mt2653.json

@@ -295,7 +295,7 @@
 					"value": 0
 				},
 				{
-					"label": "Wake up is POSSIBLE according to Intervall",
+					"label": "Wake up is POSSIBLE according to Interval",
 					"value": 1
 				}
 			]

package/config/devices/0x0179/ch-103.json

@@ -60,7 +60,7 @@
 					"value": 0
 				},
 				{
-					"label": "Motor with limit switchs",
+					"label": "Motor with limit switches",
 					"value": 1
 				},
 				{

package/config/devices/0x0179/ch-201.json

@@ -164,8 +164,8 @@
 		},
 		{
 			"#": "12",
-			"label": "Temprature threshold to send data",
-			"description": "The value that temprature should be changed to send data",
+			"label": "Temperature threshold to send data",
+			"description": "The value that temperature should be changed to send data",
 			"unit": "Δ°С",
 			"valueSize": 1,
 			"minValue": 1,
@@ -234,7 +234,7 @@
 		},
 		{
 			"#": "40",
-			"label": "Adjusment of a temperature sensor",
+			"label": "Adjustment of a temperature sensor",
 			"description": "Adjust temperature sensor if required.",
 			"valueSize": 1,
 			"defaultValue": 0,

package/config/devices/0x0185/zm-800.json

@@ -37,6 +37,6 @@
 	"metadata": {
 		"inclusion": "1. Make sure ZM-800 is in the range of the Z-Wave controller. \n2. Set the Z-Wave controller to the inclusion mode. \n3. Quickly pressing TP-Switch2 button 3 times on the ZM-800.\n4. The ZM-800 is added to the network",
 		"exclusion": "1. Make sure ZM-800 is in the range of the Z-Wave controller. \n2. Set the Z-Wave controller to the exclusion mode. \n3. Quickly pressing TP-Switch2 button 3 times on the ZM-800.\n4. The ZM-800 is deleted from the network",
-		"reset": "Note: Use the reset procedure only in the event that the network primary controller is missing or otherwise inoperable.\n1. Presse the TP-Switch2 button more than 5 seconds. \n2. Z-Wave LED is start blinking.\n3. Release the TP-Switch2 button right now.\n4. Z-Wave LED off, reset is performed"
+		"reset": "Note: Use the reset procedure only in the event that the network primary controller is missing or otherwise inoperable.\n1. Press the TP-Switch2 button more than 5 seconds. \n2. Z-Wave LED is start blinking.\n3. Release the TP-Switch2 button right now.\n4. Z-Wave LED off, reset is performed"
 	}
 }

package/config/devices/0x018f/zme_wallc-s.json

@@ -48,7 +48,7 @@
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "Seperately",
+					"label": "Separately",
 					"value": 0
 				},
 				{
@@ -71,7 +71,7 @@
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "Seperately",
+					"label": "Separately",
 					"value": 0
 				},
 				{

package/config/devices/0x019b/4512689.json

@@ -26,7 +26,7 @@
 		},
 		"2": {
 			"label": "Smoke Sensor (Basic Set)",
-			"description": "When the smoke detector is active, it will send Basic Set (0xFF) to this group. When the smoke detector is deactived, it will send Basic Set (0x00).",
+			"description": "When the smoke detector is active, it will send Basic Set (0xFF) to this group. When the smoke detector is deactivated, it will send Basic Set (0x00).",
 			"maxNodes": 5
 		}
 	},

package/config/devices/0x019b/heatit_z-trm_2_0.0_2.255.json

@@ -1,7 +1,7 @@
 {
-	"manufacturer": "ThermoFloor",
+	"manufacturer": "Heatit",
 	"manufacturerId": "0x019b",
-	"label": "Heatit Z-TRM 2",
+	"label": "Z-TRM 2",
 	"description": "Floor Thermostat",
 	"devices": [
 		{

package/config/devices/0x019b/heatit_zdim.json

@@ -1,7 +1,7 @@
 {
-	"manufacturer": "ThermoFloor",
+	"manufacturer": "Heatit",
 	"manufacturerId": "0x019b",
-	"label": "HeatIt ZDim",
+	"label": "Z-Dim",
 	"description": "Knob Smart Dimmer",
 	"devices": [
 		{

package/config/devices/0x019b/tf016_tf021.json

@@ -1,5 +1,5 @@
 {
-	"manufacturer": "ThermoFloor",
+	"manufacturer": "Heatit",
 	"manufacturerId": "0x019b",
 	"label": "TF016 / TF021",
 	"description": "ZWave Thermostat",

package/config/devices/0x019b/z-temp2.json

@@ -1,5 +1,5 @@
 {
-	"manufacturer": "ThermoFloor AS",
+	"manufacturer": "Heatit",
 	"manufacturerId": "0x019b",
 	"label": "Z-Temp2",
 	"description": "Battery operated thermostat",
@@ -17,18 +17,18 @@
 		{
 			"#": "1",
 			"label": "Temperature / Humidity Report Interval",
+			"unit": "seconds",
 			"valueSize": 2,
 			"minValue": 30,
 			"maxValue": 32767,
 			"defaultValue": 900,
-			"unit": "seconds",
 			"unsigned": true
 		},
 		{
 			"#": "2",
 			"label": "Temperature Change Report Threshold",
 			"description": "Allowable range: 5-50",
-			"unit": "1/10 °C",
+			"unit": "0.1 °C",
 			"valueSize": 2,
 			"minValue": 0,
 			"maxValue": 50,
@@ -60,8 +60,7 @@
 		},
 		{
 			"#": "4",
-			"label": "Temperature sensor offset settings",
-			"description": "Calibrate the internal temperature sensor.",
+			"label": "Temperature Sensor Calibration",
 			"unit": "°C",
 			"valueSize": 2,
 			"minValue": -100,
@@ -71,9 +70,8 @@
 		},
 		{
 			"#": "5",
-			"label": "Humidity sensor offset settings",
-			"description": "Calibrate the internal humidity sensor. 1 = 1/10%",
-			"unit": "1/10 %",
+			"label": "Humidity Sensor Calibration",
+			"unit": "0.1 %",
 			"valueSize": 2,
 			"minValue": -100,
 			"maxValue": 100,
@@ -82,7 +80,7 @@
 		},
 		{
 			"#": "6",
-			"label": "Proximity sensor re-trigger interval",
+			"label": "Proximity Sensor Re-trigger Interval",
 			"unit": "seconds",
 			"valueSize": 2,
 			"minValue": 2,
@@ -92,22 +90,10 @@
 		},
 		{
 			"#": "7",
+			"$import": "~/templates/master_template.json#base_enable_disable",
 			"label": "Proximity Sensor",
 			"valueSize": 2,
-			"minValue": 0,
-			"maxValue": 1,
-			"defaultValue": 1,
-			"unsigned": true,
-			"options": [
-				{
-					"label": "Enable",
-					"value": 0
-				},
-				{
-					"label": "Disable",
-					"value": 1
-				}
-			]
+			"defaultValue": 1
 		},
 		{
 			"#": "8",
@@ -133,22 +119,22 @@
 		{
 			"#": "10",
 			"label": "Temperature Control Hysteresis",
+			"unit": "0.1 °C",
 			"valueSize": 2,
 			"minValue": 3,
 			"maxValue": 30,
 			"defaultValue": 5,
-			"unsigned": true,
-			"unit": "0.1 °C"
+			"unsigned": true
 		},
 		{
 			"#": "11",
 			"label": "Minimum Temperature Limit",
+			"unit": "0.1 °C",
 			"valueSize": 2,
 			"minValue": 50,
 			"maxValue": 400,
 			"defaultValue": 50,
-			"unsigned": true,
-			"unit": "0.1 °C"
+			"unsigned": true
 		},
 		{
 			"#": "12",
@@ -178,22 +164,15 @@
 		},
 		{
 			"#": "14",
+			"$import": "~/templates/master_template.json#base_enable_disable",
 			"label": "Send Report When Presence is Detected",
-			"valueSize": 2,
-			"minValue": 0,
-			"maxValue": 1,
-			"defaultValue": 0,
-			"unsigned": true,
-			"options": [
-				{
-					"label": "Disable",
-					"value": 0
-				},
-				{
-					"label": "Enable",
-					"value": 1
-				}
-			]
+			"valueSize": 2
+		},
+		{
+			"#": "15",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Invert Output",
+			"valueSize": 2
 		}
 	]
 }

package/config/devices/0x019b/z-trm2fx_3.0_255.255.json

@@ -1,5 +1,5 @@
 {
-	"manufacturer": "ThermoFloor",
+	"manufacturer": "Heatit",
 	"manufacturerId": "0x019b",
 	"label": "Z-TRM2fx",
 	"description": "Floor thermostat",

package/config/devices/0x019b/z-trm3.json

@@ -1,7 +1,7 @@
 {
-	"manufacturer": "ThermoFloor",
+	"manufacturer": "Heatit",
 	"manufacturerId": "0x019b",
-	"label": "Heatit Z-TRM3",
+	"label": "Z-TRM3",
 	"description": "Floor thermostat",
 	"devices": [
 		{

package/config/devices/0x019b/zm_single_relay_16.json

@@ -1,8 +1,8 @@
 {
-	"manufacturer": "HeatIt",
+	"manufacturer": "Heatit",
 	"manufacturerId": "0x019b",
-	"label": "4512671",
-	"description": "Heatit ZM Single Relay 16A",
+	"label": "ZM Single Relay 16A",
+	"description": "High power relay",
 	"devices": [
 		{
 			"productType": "0x0004",

package/config/devices/0x0208/hkzw-so05.json

@@ -80,7 +80,7 @@
 		{
 			"#": "151",
 			"label": "Power Report Threshold",
-			"description": "Power threashold for when to send reports to associated devices",
+			"description": "Power threshold for when to send reports to associated devices",
 			"unit": "W",
 			"valueSize": 2,
 			"minValue": 0,

package/config/devices/0x0208/hkzw_fld01.json

@@ -164,7 +164,7 @@
 		{
 			"#": "32",
 			"label": "Level of low battery",
-			"description": "This parameter defines a battery level as the \"low bettery\"",
+			"description": "This parameter defines a battery level as the \"low battery\"",
 			"valueSize": 1,
 			"minValue": 10,
 			"maxValue": 50,

package/config/devices/0x0217/9001.json

@@ -16,7 +16,7 @@
 	},
 	"metadata": {
 		"inclusion": "To include our device into a controller.\n1.Perform 'Include' on the controller.\n2.From the lock's main menu item \"7.Zwave\", select the \"ZwaveInclusion\" by using the arrow keys to scroll to it and then pressing 'M' to select it. After a few seconds, you should see \"Success\" on the lock",
-		"exclusion": "To exclude our device from a controller .\n1.Perform 'Exclude' on the controller.\n2.From the lock's main menu item \"7.Zwave\", select the \"ZwaveExclusion\" option by using the arrow keeys to scroll to it and then pressing 'M' to sleect it. After a few seconds, you should see \"Success\" on the lock",
+		"exclusion": "To exclude our device from a controller .\n1.Perform 'Exclude' on the controller.\n2.From the lock's main menu item \"7.Zwave\", select the \"ZwaveExclusion\" option by using the arrow keeys to scroll to it and then pressing 'M' to select it. After a few seconds, you should see \"Success\" on the lock",
 		"reset": "If your controller fails or is replaced or if you need to perform a Factory reset on the device so that an inclusion may be performed again or with a new controller, Factory reset can be done on the device by selecting ‘ Hard Reset’ from the Main Menu on device’s display and pressing the 'M' button. When prompted to reset press the 'M' button on the unit and the device will display initializing. Once the reset is complete the display will return to the Main Menu. \nNote: When a Hard Reset is completed, the zwave node id is initialized to 0 and the device can't be controlled by zwave. In order to control the device again, the controller needs to include the device on zwave network",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1342/RTS%20Series%20Operational%20Manual_Updated_10222015.pdf"
 	}

package/config/devices/0x0234/lhc5020_0.0_1.255.json

@@ -2,7 +2,7 @@
 	"manufacturer": "Logic Group",
 	"manufacturerId": "0x0234",
 	"label": "LHC5020",
-	"description": "DIN-rail module with 10 digital ouputs and 4 digital inputs",
+	"description": "DIN-rail module with 10 digital outputs and 4 digital inputs",
 	"devices": [
 		{
 			"productType": "0x0003",

package/config/devices/0x0244/homey.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "To Reset Homey to factory defaults, place Homey upside down. After a few seconds, Homey will initiate a countdown (both visually in the LED ring and verbally trough voice) of 15 seconds. After the countdown had ended, browse on a computer, laptop or tablet to setup.athom.com to initiate a new setup. PLEASE USE THE RESET PROCEDURE ONLY IF YOU EXPERIENCE SEVERE DIFFICULTIES WITH HOMEY'S OPERATING SYSTEM OR WHEN ADVISED TO DO SO BY ATHOM SUPPORT",
+		"reset": "To Reset Homey to factory defaults, place Homey upside down. After a few seconds, Homey will initiate a countdown (both visually in the LED ring and verbally through voice) of 15 seconds. After the countdown had ended, browse on a computer, laptop or tablet to setup.athom.com to initiate a new setup. PLEASE USE THE RESET PROCEDURE ONLY IF YOU EXPERIENCE SEVERE DIFFICULTIES WITH HOMEY'S OPERATING SYSTEM OR WHEN ADVISED TO DO SO BY ATHOM SUPPORT",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4208/athomhomeymanualzwave.pdf"
 	}
 }

package/config/devices/0x024a/heimdall.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "Click “Reset” , show “Proccessing…” to reset the Z-Wave network.Refer user manual page 12",
+		"reset": "Click “Reset”, show “Processing…” to reset the Z-Wave network. Refer user manual page 12",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1832/UM-Heimdall-SUNITEC-en160714.pdf"
 	}
 }

package/config/devices/0x024d/dn3g6ja062.json

@@ -2,7 +2,7 @@
 	"manufacturer": "Z-works Inc.",
 	"manufacturerId": "0x024d",
 	"label": "DN3G6JA062",
-	"description": "Lock Dectector",
+	"description": "Lock Detector",
 	"devices": [
 		{
 			"productType": "0x4761",

package/config/devices/0x024f/fms01.json

@@ -176,7 +176,7 @@
 		},
 		{
 			"#": "64",
-			"label": "Temperature Report Inteval",
+			"label": "Temperature Report Interval",
 			"description": "Report Interval in seconds",
 			"unit": "seconds",
 			"valueSize": 2,

package/config/devices/0x024f/fwc01.json

@@ -382,7 +382,7 @@
 		},
 		{
 			"#": "64",
-			"label": "Temperature Report Inteval",
+			"label": "Temperature Report Interval",
 			"unit": "seconds",
 			"valueSize": 2,
 			"minValue": 0,

package/config/devices/0x0262/dbzf-3410.json

@@ -15,9 +15,9 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "1. Press [SET] for 1 second\n2. Enter 4-8 digits Programing Code\n3. Press the buttons #90#\n4. Include successfully (beep * 1)",
-		"exclusion": "1. Press [SET] for 1 second\n2. Enter 4-8 digits Programing Code\n3. Press the buttons #90#\n4. Exclude successfully (beep * 1)",
-		"reset": "1. Remove one battery.\n2. Press and hold SET button while inserting the battery back. Hold the set button until long beep has finished.\n3. Resotring the lock to factory settings will remove its connection to your network and clear all devices from its assocation group. The reset procedure should only be used when the primary controller is missing or inoperable.\n4. Please re-enter the default Programming Code to set up the lock after restoring to factory settings",
+		"inclusion": "1. Press [SET] for 1 second\n2. Enter 4-8 digits Programming Code\n3. Press the buttons #90#\n4. Include successfully (beep * 1)",
+		"exclusion": "1. Press [SET] for 1 second\n2. Enter 4-8 digits Programming Code\n3. Press the buttons #90#\n4. Exclude successfully (beep * 1)",
+		"reset": "1. Remove one battery.\n2. Press and hold SET button while inserting the battery back. Hold the set button until long beep has finished.\n3. Resotring the lock to factory settings will remove its connection to your network and clear all devices from its association group. The reset procedure should only be used when the primary controller is missing or inoperable.\n4. Please re-enter the default Programming Code to set up the lock after restoring to factory settings",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2225/manual-G00-TPDBF19-00.pdf"
 	}
 }

package/config/devices/0x0262/gb05dbf.json

@@ -15,9 +15,9 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "1. Press [SET] for 1 second\n2. Enter 4-8 digits Programing Code\n3. Press the buttons #90#\n4. Include successfully (beep * 1)",
-		"exclusion": "1. Press [SET] for 1 second\n2. Enter 4-8 digits Programing Code\n3. Press the buttons #90#\n4. Exclude successfully (beep * 1)",
-		"reset": "1. Remove one battery.\n2. Press and hold SET button while inserting the battery back. Hold the set button until long beep has finished.\n3. Resotring the lock to factory settings will remove its connection to your network and clear all devices from its assocation group. The reset procedure should only be used when the primary controller is missing or inoperable.\n4. Please re-enter the default Programming Code to set up the lock after restoring to factory settings",
+		"inclusion": "1. Press [SET] for 1 second\n2. Enter 4-8 digits Programming Code\n3. Press the buttons #90#\n4. Include successfully (beep * 1)",
+		"exclusion": "1. Press [SET] for 1 second\n2. Enter 4-8 digits Programming Code\n3. Press the buttons #90#\n4. Exclude successfully (beep * 1)",
+		"reset": "1. Remove one battery.\n2. Press and hold SET button while inserting the battery back. Hold the set button until long beep has finished.\n3. Resotring the lock to factory settings will remove its connection to your network and clear all devices from its association group. The reset procedure should only be used when the primary controller is missing or inoperable.\n4. Please re-enter the default Programming Code to set up the lock after restoring to factory settings",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2682/manual-G00-TPDBF19-00.pdf"
 	}
 }

package/config/devices/0x0266/stw-gs190.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "Reset SiterOne will remove all Z-Wave device and reset the controller status to factory default. \n\nIf this SiterOne is the primary controller for your network, reset controller will result in all added devices in your network being orphaned and you have to force exclude all devices and then add them again.\n\nIf this SiterOne is a secondary controller in the network, reset controller will reset this controller only , so the primary controller will no longer see the secondary controller.\n\n- Navigate to the setting Menu\n- Enter the Setting Menu, and tap the Zwave page.\n- Enter PIN code: default is 1234 \n- At the Z-Wave setting page, tap Reset Controller\n- At the Reset Controller Dialog, tap Reset \n\nWhile the controller is being reset, it will show Reseting\n\nWhen the controller is reset, it will show Successfully. Tap OK and the reset is done.",
+		"reset": "Reset SiterOne will remove all Z-Wave device and reset the controller status to factory default. \n\nIf this SiterOne is the primary controller for your network, reset controller will result in all added devices in your network being orphaned and you have to force exclude all devices and then add them again.\n\nIf this SiterOne is a secondary controller in the network, reset controller will reset this controller only , so the primary controller will no longer see the secondary controller.\n\n- Navigate to the setting Menu\n- Enter the Setting Menu, and tap the Zwave page.\n- Enter PIN code: default is 1234 \n- At the Z-Wave setting page, tap Reset Controller\n- At the Reset Controller Dialog, tap Reset \n\nWhile the controller is being reset, it will show Resetting\n\nWhen the controller is reset, it will show Successfully. Tap OK and the reset is done.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2131/STW-GS190B.pdf"
 	}
 }

package/config/devices/0x0267/10002034-13x.json

@@ -67,7 +67,7 @@
 		},
 		{
 			"#": "12",
-			"label": "Behavior of LED in Reponse",
+			"label": "Behavior of LED in Response",
 			"description": "Configuration of Main LED as identification at 20%.",
 			"valueSize": 1,
 			"defaultValue": 0,

package/config/devices/0x0267/10002081-13x.json

@@ -176,7 +176,7 @@
 	"metadata": {
 		"inclusion": "Set the Z-Wave Controller to inclusion mode.\n Press the button for between 2 and 30 seconds.",
 		"exclusion": "Set the Z-Wave Controller to exclusion mode.\n Press the button for between 2 and 30 seconds.",
-		"reset": "Long press button for more than 30 secounds in the product.\nMain LED lights up for 2.5 seconds，then turns off.",
+		"reset": "Long press button for more than 30 seconds in the product.\nMain LED lights up for 2.5 seconds，then turns off.",
 		"manual": "https://static.simonelectric.com/estaticos/extras/ficheros/contenidos/00/00/01/15/15//10002081-13x%20Tecla%20Master%20persianas%20IO_2.pdf"
 	}
 }

package/config/devices/0x0267/10002862-039.json

@@ -17,7 +17,7 @@
 	"metadata": {
 		"inclusion": "Device ADD for Inclusion\n- Click [Add] icon in Z-Wave Controller .\n- Press the Net_Button for between 2 and 30 seconds, Green LED is Blinking one time every 300 milliseconds.\n- If Inclusion Process is successful, Green led will turn off.",
 		"exclusion": "Device Remove for Exclusion\n- Click [Remove] icon in Z-Wave Controller\n- Press the Net_Button for between 2 and 30 seconds, Green LED is Blinking one time every 300 milliseconds.",
-		"reset": "-Long press Net_Button for more than 30 secounds in the product. \n- Device Reset Locally notification is Transmitted.Green led is turn on for 2.5 seconds，then turn off.\n\n. Please use this procedure only when the network primary controller is missing or otherwise inoperable.",
+		"reset": "-Long press Net_Button for more than 30 seconds in the product. \n- Device Reset Locally notification is Transmitted.Green led is turn on for 2.5 seconds，then turn off.\n\n. Please use this procedure only when the network primary controller is missing or otherwise inoperable.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3888/Simon%20smoke%20alarm%20user%20manual.pdf"
 	}
 }