@zwave-js/config 10.0.0-beta.1 → 10.0.0-beta.10

package/config/devices/0x0063/{12735.json → 12735_zw3007.json}

@@ -1,8 +1,8 @@
 {
-	"manufacturer": "GE/Jasco",
+	"manufacturer": "GE",
 	"manufacturerId": "0x0063",
-	"label": "12735",
-	"description": "GE In-Wall Dimmer, Toggle, Almond, No Neutral",
+	"label": "12735 / ZW3007",
+	"description": "In-Wall Toggle Dimmer, No Ntrl, Lt Almd, 300S",
 	"devices": [
 		{
 			"productType": "0x4944",

package/config/devices/0x0063/14280_zw3107.json

@@ -1,8 +1,8 @@
 {
-	"manufacturer": "GE/Jasco",
+	"manufacturer": "GE",
 	"manufacturerId": "0x0063",
 	"label": "14280 / ZW3107",
-	"description": "Plug-In Smart Dimmer (Dual Linked Outlets)",
+	"description": "Plug-in 2-Outlet Dimmer, Simultaneous, 500S",
 	"devices": [
 		{
 			"productType": "0x5044",

package/config/devices/0x0063/{ge_plug_in_smart_switch.json → 14282_zw4106.json}

@@ -1,8 +1,8 @@
 {
-	"manufacturer": "GE/Jasco",
+	"manufacturer": "GE",
 	"manufacturerId": "0x0063",
-	"label": "Plug in Smart Switch",
-	"description": "GE Plug in Smart Switch Zwave Plus",
+	"label": "14282 / ZW4106",
+	"description": "Plug-in 2-Outlet Switch, Simultaneous, 500S",
 	"devices": [
 		{
 			"productType": "0x5052",

package/config/devices/0x0063/{ge_outdoor_switch.json → 14284_zw4201.json}

@@ -1,8 +1,8 @@
 {
-	"manufacturer": "GE/Jasco",
+	"manufacturer": "GE",
 	"manufacturerId": "0x0063",
-	"label": "Outdoor Switch",
-	"description": "Weather Resistant Outdoor Switch",
+	"label": "14284 / ZW4201",
+	"description": "Plug-in Outdoor Switch, 500S",
 	"devices": [
 		{
 			"productType": "0x4f50",

package/config/devices/0x0063/{ge_jasco_14285.json → 14285_zw4007.json}

@@ -1,8 +1,8 @@
 {
-	"manufacturer": "GE/Jasco",
+	"manufacturer": "Enbrighten",
 	"manufacturerId": "0x0063",
-	"label": "14285",
-	"description": "Direct Wire Indoor/Outdoor Smart Switch",
+	"label": "14285 / ZW4007",
+	"description": "Direct Wire 40A Outdoor Switch, 500S",
 	"devices": [
 		{
 			"productType": "0x4f44",

package/config/devices/0x0063/14286_zw1001.json

@@ -1,8 +1,8 @@
 {
-	"manufacturer": "GE/Jasco",
+	"manufacturer": "GE",
 	"manufacturerId": "0x0063",
 	"label": "14286 / ZW1001",
-	"description": "In-Wall Smart Outlet",
+	"description": "In-Wall Outlet, 300S",
 	"devices": [
 		{
 			"productType": "0x4952",

package/config/devices/0x0063/{14287.json → 14287_zw4002.json}

@@ -1,8 +1,8 @@
 {
-	"manufacturer": "GE/Jasco",
+	"manufacturer": "GE",
 	"manufacturerId": "0x0063",
 	"label": "14287 / ZW4002",
-	"description": "In-Wall Smart Fan Control",
+	"description": "In-Wall Fan Speed Control, 500S",
 	"devices": [
 		{
 			"productType": "0x4944",

package/config/devices/0x0063/14288_zw1002.json

@@ -1,18 +1,13 @@
 {
-	"manufacturer": "GE/Jasco",
+	"manufacturer": "GE",
 	"manufacturerId": "0x0063",
 	"label": "14288 / ZW1002",
-	"description": "In-Wall Tamper Resistant Smart Outlet",
+	"description": "In-Wall Outlet, TR, 500S",
 	"devices": [
 		{
 			"productType": "0x4952",
 			"productId": "0x3133",
 			"zwaveAllianceId": 2732
-		},
-		{
-			"productType": "0x4952",
-			"productId": "0x3134",
-			"zwaveAllianceId": [2236, 2372]
 		}
 	],
 	"firmwareVersion": {

package/config/devices/0x0063/{ge_14289_zw3009.json → 14289_zw3009.json}

@@ -1,8 +1,8 @@
 {
-	"manufacturer": "GE/Jasco",
+	"manufacturer": "GE",
 	"manufacturerId": "0x0063",
 	"label": "14289 / ZW3009",
-	"description": "In-Wall Touch Sensing Dimmer",
+	"description": "In-Wall Capacitive Touch Dimmer, 500S",
 	"devices": [
 		{
 			"productType": "0x4944",

package/config/devices/0x0063/{ge_14291_zw4005.json → 14291_zw4005.json}

@@ -1,8 +1,8 @@
 {
-	"manufacturer": "GE/Jasco",
+	"manufacturer": "GE",
 	"manufacturerId": "0x0063",
 	"label": "14291 / ZW4005",
-	"description": "In-Wall Paddle Switch",
+	"description": "In-Wall Paddle Switch, 500S",
 	"devices": [
 		{
 			"productType": "0x4952",

package/config/devices/0x0063/{ge_14292.json → 14292_zw4003.json}

@@ -1,8 +1,8 @@
 {
-	"manufacturer": "GE/Jasco",
+	"manufacturer": "GE",
 	"manufacturerId": "0x0063",
-	"label": "14292",
-	"description": "In-Wall Toggle Switch",
+	"label": "14292 / ZW4003",
+	"description": "In-Wall Toggle Switch, 500S",
 	"devices": [
 		{
 			"productType": "0x4952",

package/config/devices/0x0063/{14293_zw4003.json → 14293_zw4009.json}

@@ -1,8 +1,8 @@
 {
-	"manufacturer": "GE/Jasco",
+	"manufacturer": "Enbrighten",
 	"manufacturerId": "0x0063",
-	"label": "14293 / ZW4003",
-	"description": "In-Wall Smart Toggle Switch (Lt. Almond)",
+	"label": "14293 / ZW4009",
+	"description": "In-Wall Toggle Switch, Lt Almd, QFSW, 500S",
 	"devices": [
 		{
 			"productType": "0x4952",

package/config/devices/0x0063/{ge_14294_zw3005.json → 14294_zw3005.json}

@@ -1,8 +1,8 @@
 {
-	"manufacturer": "GE/Jasco",
+	"manufacturer": "GE",
 	"manufacturerId": "0x0063",
 	"label": "14294 / ZW3005",
-	"description": "In-Wall Dimmer Switch",
+	"description": "In-Wall Paddle Dimmer, 500S",
 	"devices": [
 		{
 			"productType": "0x4944",

package/config/devices/0x0063/{ge_14295.json → 14295_zw3004.json}

@@ -1,8 +1,8 @@
 {
-	"manufacturer": "GE/Jasco",
+	"manufacturer": "GE",
 	"manufacturerId": "0x0063",
-	"label": "14295",
-	"description": "In-Wall Dimmer Switch",
+	"label": "14295 / ZW3004",
+	"description": "In-Wall Toggle Dimmer, 500S",
 	"devices": [
 		{
 			"productType": "0x4944",

package/config/devices/0x0063/14296_zw3011.json

@@ -1,8 +1,8 @@
 {
-	"manufacturer": "GE/Jasco",
+	"manufacturer": "Enbrighten",
 	"manufacturerId": "0x0063",
 	"label": "14296 / ZW3011",
-	"description": "In-Wall Smart Toggle Dimmer",
+	"description": "In-Wall Toggle Dimmer, Lt Almd, QFSW, 500S",
 	"devices": [
 		{
 			"productType": "0x4944",

package/config/devices/0x0063/14297_zw1002.json

@@ -0,0 +1,16 @@
+{
+	"manufacturer": "Enbrighten",
+	"manufacturerId": "0x0063",
+	"label": "14297 / ZW1002",
+	"description": "In-Wall Outlet, TR, Lt Almd, 500S",
+	"devices": [
+		{
+			"productType": "0x4952",
+			"productId": "0x3233"
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	}
+}

package/config/devices/0x0063/{14298_zw4202.json → 14298_zw4203.json}

@@ -1,8 +1,8 @@
 {
-	"manufacturer": "GE/Jasco",
+	"manufacturer": "GE/Enbrighten",
 	"manufacturerId": "0x0063",
-	"label": "14298 / ZW4202",
-	"description": "Plug-in Outdoor Smart Switch",
+	"label": "14298 / ZW4203",
+	"description": "Plug-in Outdoor Switch V2, 500S",
 	"devices": [
 		{
 			"productType": "0x4f50",

package/config/devices/0x0063/{ge_jasco_14299.json → 14299_zw3006.json}

@@ -1,8 +1,8 @@
 {
-	"manufacturer": "GE/Jasco",
+	"manufacturer": "GE",
 	"manufacturerId": "0x0063",
-	"label": "14299",
-	"description": "In-Wall 1000W Incandescent Smart Dimmer",
+	"label": "14299 / ZW3006",
+	"description": "In-Wall 1000W Paddle Dimmer, 500S",
 	"devices": [
 		{
 			"productType": "0x4944",

package/config/devices/0x0063/{14307.json → 14307_zw3107.json}

@@ -1,8 +1,8 @@
 {
-	"manufacturer": "GE/Jasco",
+	"manufacturer": "Jasco",
 	"manufacturerId": "0x0063",
-	"label": "14307",
-	"description": "Plug-in Smart Dimmer, Dual Outlet with Simultaneous Control",
+	"label": "14307 / ZW3107",
+	"description": "Plug-in 2-Outlet Dimmer, Simultaneous, 500S",
 	"devices": [
 		{
 			"productType": "0x5044",

package/config/devices/0x0063/{14309.json → 14309_zw4106.json}

@@ -1,8 +1,8 @@
 {
-	"manufacturer": "GE/Jasco",
+	"manufacturer": "Jasco",
 	"manufacturerId": "0x0063",
-	"label": "14309",
-	"description": "Plug-in Smart Switch, Dual Outlet with Simultaneous Control",
+	"label": "14309 / ZW4106",
+	"description": "Plug-in 2-Outlet Switch, Simultaneous, 500S",
 	"devices": [
 		{
 			"productType": "0x5052",

package/config/devices/0x0063/14311_zw4201.json

@@ -1,8 +1,8 @@
 {
-	"manufacturer": "GE/Jasco",
+	"manufacturer": "Jasco",
 	"manufacturerId": "0x0063",
-	"label": "14311/ZW4201",
-	"description": "Plug-in Outdoor Smart Switch",
+	"label": "14311 / ZW4201",
+	"description": "Plug-in Outdoor Switch, 500S",
 	"devices": [
 		{
 			"productType": "0x4f50",

package/config/devices/0x0063/14313_zw1001.json

@@ -1,8 +1,8 @@
 {
-	"manufacturer": "GE/Jasco",
+	"manufacturer": "Jasco",
 	"manufacturerId": "0x0063",
 	"label": "14313 / ZW1001",
-	"description": "In-Wall Smart Outlet",
+	"description": "In-Wall Outlet, 300S",
 	"devices": [
 		{
 			"productType": "0x4952",

package/config/devices/0x0063/14314_zw4002.json

@@ -1,13 +1,13 @@
 {
-	"manufacturer": "GE/Jasco",
+	"manufacturer": "Jasco",
 	"manufacturerId": "0x0063",
 	"label": "14314 / ZW4002",
-	"description": "In-Wall Smart Fan Control",
+	"description": "In-Wall Fan Speed Control, 500S",
 	"devices": [
 		{
 			"productType": "0x4944",
-			"productId": "0x3232",
-			"zwaveAllianceId": 2557
+			"productId": "0x3138",
+			"zwaveAllianceId": [1369, 1937]
 		}
 	],
 	"firmwareVersion": {
@@ -32,8 +32,8 @@
 	},
 	"paramInformation": [
 		{
-			"#": "4",
-			"$import": "~/templates/master_template.json#orientation"
+			"#": "3",
+			"$import": "~/templates/master_template.json#led_indicator_three_options"
 		}
 	],
 	"compat": {
@@ -48,9 +48,9 @@
 		}
 	},
 	"metadata": {
-		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to include a device to the Z-Wave network.\n2. Once the controller is ready to include your device, press and release the top or bottom of the smart fan control switch (rocker) to include it in the network.\n3. Once your controller has confirmed the device has been included, refresh the Z-Wave network to optimize performance",
-		"exclusion": "1. Follow the instructions for your Z-Wave certified controller to exclude a device from the Z-Wave network. \n2. Once the controller is ready to Exclude your device, press and release the top or bottom of the wireless smart switch (rocker) to exclude it from the network",
-		"reset": "1. Quickly press ON (Top) button three (3) times then immediately press the OFF (Bottom) button three (3) times. The LED will flash ON/OFF 5 times when completed successfully.\nNote: This should only be used in the event your network’s primary controller is missing or otherwise inoperable",
-		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2557/Binder2.pdf"
+		"inclusion": "Linking your device\n1. Follow the instructions for your Z-wave certified controller to include a device to\nthe Z-wave network.\n2. Once the controller is ready to include your device, press and release the top or\nbottom of the wireless smart switch(rocker) to include it in the network.\nNote: Your controller may need to be within 10 feet of the device to be included.\n3. Once your controller has confirmed that the device has been included, refresh the\nZ-wave network to optimize performance.\nPlease reference the controller’s manual for instructions",
+		"exclusion": "Note: To exclude and reset the device, follow the instructions provided by your\nZ-Wave controller",
+		"reset": "Quickly press ON (Top) button three (3) times and then immediately press the OFF (Bottom) button three (3) times. The LED will flash ON/OFF 5 times when completed successfully. Use this procedure only in the event that the network primary controller is missing or otherwise inoperable",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1937/Binder1.pdf"
 	}
 }

package/config/devices/0x0063/14315_zw1002.json

@@ -0,0 +1,29 @@
+{
+	"manufacturer": "Jasco",
+	"manufacturerId": "0x0063",
+	"label": "14315 / ZW1002",
+	"description": "In-Wall Outlet, TR, 500S",
+	"devices": [
+		{
+			"productType": "0x4952",
+			"productId": "0x3134",
+			"zwaveAllianceId": [2236, 2372]
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"paramInformation": [
+		{
+			"#": "3",
+			"$import": "~/templates/master_template.json#led_indicator_three_options"
+		}
+	],
+	"metadata": {
+		"inclusion": "Follow the instructions for your Z-Wave certified\ncontroller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press and\nrelease the Program Button to add it in the network",
+		"exclusion": "1. Follow the instructions for your Z-Wave certified controller to\nremove a device from the Z-Wave network.\n2. Once the controller is ready to remove your device, press and\nrelease the manual/program button to remove it from the\nnetwork",
+		"reset": "Press the button 3 times, then press and hold the button for at least 3\nseconds. The LED will blink 5 times to confirm.\nNOTE: This should only be used in the event your network’s primary\ncontroller is missing or otherwise inoperable",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2236/14288%20QSG%20v1.pdf"
+	}
+}

package/config/devices/0x0063/{jasco_14318.json → 14318_zw4005.json}

@@ -1,8 +1,8 @@
 {
-	"manufacturer": "GE/Jasco",
+	"manufacturer": "Jasco",
 	"manufacturerId": "0x0063",
-	"label": "Jasco 14318",
-	"description": "Jasco 3-way Light Switch",
+	"label": "14318 / ZW4005",
+	"description": "In-Wall Paddle Switch, 500S",
 	"devices": [
 		{
 			"productType": "0x4952",

package/config/devices/0x0063/14319_zw4003.json

@@ -1,8 +1,8 @@
 {
-	"manufacturer": "GE/Jasco",
+	"manufacturer": "Jasco",
 	"manufacturerId": "0x0063",
 	"label": "14319 / ZW4003",
-	"description": "In-Wall Smart Toggle Switch",
+	"description": "In-Wall Toggle Switch, 500S",
 	"devices": [
 		{
 			"productType": "0x4952",

package/config/devices/0x0063/14320_zw4003.json

@@ -1,8 +1,8 @@
 {
-	"manufacturer": "GE/Jasco",
+	"manufacturer": "Jasco",
 	"manufacturerId": "0x0063",
 	"label": "14320 / ZW4003",
-	"description": "In-Wall Smart Toggle Switch",
+	"description": "In-Wall Toggle Switch, Lt Almd, 500S",
 	"devices": [
 		{
 			"productType": "0x4952",

package/config/devices/0x0063/{ge_jasco_14321.json → 14321_zw3005.json}

@@ -1,8 +1,8 @@
 {
-	"manufacturer": "GE/Jasco",
+	"manufacturer": "Jasco",
 	"manufacturerId": "0x0063",
-	"label": "14321",
-	"description": "In-Wall Dimmer",
+	"label": "14321 / ZW3005",
+	"description": "In-Wall Paddle Dimmer, 500S",
 	"devices": [
 		{
 			"productType": "0x4944",

package/config/devices/0x0063/{14322.json → 14322_zw3004.json}

@@ -1,8 +1,8 @@
 {
-	"manufacturer": "GE/Jasco",
+	"manufacturer": "Jasco",
 	"manufacturerId": "0x0063",
-	"label": "14322",
-	"description": "Jasco In-Wall Smart Dimmer (White Toggle)",
+	"label": "14322 / ZW3004",
+	"description": "In-Wall Toggle Dimmer, 500S",
 	"devices": [
 		{
 			"productType": "0x4944",

package/config/devices/0x0063/14325_zw4203.json

@@ -1,8 +1,8 @@
 {
-	"manufacturer": "GE/Jasco",
+	"manufacturer": "Jasco",
 	"manufacturerId": "0x0063",
 	"label": "14325 / ZW4203",
-	"description": "Plug-in Outdoor Smart Switch",
+	"description": "Plug-in Outdoor Switch V2, 500S",
 	"devices": [
 		{
 			"productType": "0x4f50",

package/config/devices/0x0063/{14326.json → 14326_zw3006.json}

@@ -1,8 +1,8 @@
 {
-	"manufacturer": "GE/Jasco",
+	"manufacturer": "Jasco",
 	"manufacturerId": "0x0063",
-	"label": "14326",
-	"description": "In-Wall Smart Dimmer (1000W)",
+	"label": "14326 / ZW3006",
+	"description": "In-Wall 1000W Toggle Dimmer, 500S",
 	"devices": [
 		{
 			"productType": "0x4944",

package/config/devices/0x0063/24770_zw4006.json

@@ -1,8 +1,8 @@
 {
-	"manufacturer": "GE/Jasco",
+	"manufacturer": "Jasco",
 	"manufacturerId": "0x0063",
 	"label": "24770 / ZW4006",
-	"description": "In-Wall Smart Motion Switch",
+	"description": "In-Wall Motion Switch, 500S",
 	"devices": [
 		{
 			"productType": "0x494d",

package/config/devices/0x0063/26931_zw4006.json

@@ -1,8 +1,8 @@
 {
-	"manufacturer": "GE/Jasco",
+	"manufacturer": "GE/Enbrighten",
 	"manufacturerId": "0x0063",
 	"label": "26931 / ZW4006",
-	"description": "In-Wall Smart Motion Switch",
+	"description": "In-Wall Motion Switch, 500S",
 	"devices": [
 		{
 			"productType": "0x494d",

package/config/devices/0x0063/{26932_26933_zw3008.json → 26932_zw3008.json}

@@ -1,16 +1,12 @@
 {
-	"manufacturer": "GE/Jasco",
+	"manufacturer": "Jasco",
 	"manufacturerId": "0x0063",
-	"label": "26932 / 26933 / ZW3008",
-	"description": "In-Wall Smart Motion Dimmer",
+	"label": "26932 / ZW3008",
+	"description": "In-Wall Motion Dimmer, 500S",
 	"devices": [
 		{
 			"productType": "0x494d",
 			"productId": "0x3033"
-		},
-		{
-			"productType": "0x494d",
-			"productId": "0x3034"
 		}
 	],
 	"firmwareVersion": {

package/config/devices/0x0063/26933_zw3008.json

@@ -0,0 +1,113 @@
+{
+	"manufacturer": "GE/Enbrighten",
+	"manufacturerId": "0x0063",
+	"label": "26933 / ZW3008",
+	"description": "In-Wall Motion Dimmer, 500S",
+	"devices": [
+		{
+			"productType": "0x494d",
+			"productId": "0x3034"
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 5,
+			"isLifeline": true
+		},
+		"2": {
+			"label": "Basic Set",
+			"maxNodes": 5
+		}
+	},
+	"paramInformation": [
+		{
+			"#": "1",
+			"$import": "templates/jasco_template.json#timeout_duration"
+		},
+		{
+			"#": "2",
+			"$import": "templates/jasco_template.json#dim_level"
+		},
+		{
+			"#": "3",
+			"$import": "templates/jasco_template.json#operation_mode"
+		},
+		{
+			"#": "4",
+			"$import": "templates/jasco_template.json#association_mode"
+		},
+		{
+			"#": "5",
+			"$import": "~/templates/master_template.json#orientation"
+		},
+		{
+			"#": "6",
+			"$import": "templates/jasco_template.json#motion_sensor"
+		},
+		{
+			"#": "7",
+			"$import": "templates/jasco_template.json#dimmer_steps_z"
+		},
+		{
+			"#": "8",
+			"$import": "templates/jasco_template.json#dimmer_times_z"
+		},
+		{
+			"#": "9",
+			"$import": "templates/jasco_template.json#dimmer_steps"
+		},
+		{
+			"#": "10",
+			"$import": "templates/jasco_template.json#dimmer_times"
+		},
+		{
+			"#": "11",
+			"$import": "templates/jasco_template.json#dimmer_steps_a"
+		},
+		{
+			"#": "12",
+			"$import": "templates/jasco_template.json#dimmer_times_a"
+		},
+		{
+			"#": "13",
+			"$import": "templates/jasco_template.json#motion_sensitivity"
+		},
+		{
+			"#": "14",
+			"$import": "templates/jasco_template.json#light_sensor"
+		},
+		{
+			"#": "15",
+			"$import": "templates/jasco_template.json#reset_cycle"
+		},
+		{
+			"#": "16",
+			"$import": "templates/jasco_template.json#switch_mode"
+		},
+		{
+			"#": "17",
+			"$import": "templates/jasco_template.json#switch_level"
+		},
+		{
+			"#": "18",
+			"$import": "templates/jasco_template.json#dim_rate"
+		},
+		{
+			"#": "19",
+			"$import": "templates/jasco_template.json#alternate_exclusion"
+		}
+	],
+	// Add compat flag to re-enable basic command events to replicate central scene functionality.
+	// Allows user to detect switch button presses as events when zwave controller is added to Group 2 or 3.
+	"compat": {
+		"treatBasicSetAsEvent": true
+	},
+	"metadata": {
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2108/26933%20EnFrSp%20QSG%20v1.3%20and%20Parameters.pdf"
+	}
+}

package/config/devices/0x0063/28166_zw3104.json

@@ -1,8 +1,8 @@
 {
-	"manufacturer": "GE/Jasco",
+	"manufacturer": "Jasco",
 	"manufacturerId": "0x0063",
 	"label": "28166 / ZW3104",
-	"description": "Plug-in Smart Dimmer (Single Plug)",
+	"description": "Plug-in 1-Outlet Dimmer, 500S",
 	"devices": [
 		{
 			"productType": "0x5044",

package/config/devices/0x0063/{ge_28167_zw3104.json → 28167_zw3104.json}

@@ -1,8 +1,8 @@
 {
-	"manufacturer": "GE/Jasco",
+	"manufacturer": "GE",
 	"manufacturerId": "0x0063",
 	"label": "28167 / ZW3104",
-	"description": "Plug-In Smart Dimmer",
+	"description": "Plug-in 1-Outlet Dimmer, 500S",
 	"devices": [
 		{
 			"productType": "0x5044",