@torrent-tv/proxy 2.87.10 → 2.87.11

package/.claude/commands/opsx/apply.md

@@ -1,155 +1,155 @@
----
-name: "OPSX: Apply"
-description: Implement tasks from an OpenSpec change (Experimental)
-category: Workflow
-tags: [workflow, artifacts, experimental]
----
-
-Implement tasks from an OpenSpec change.
-
-**Store selection:** If the user names a store (a store is a standalone OpenSpec repo registered on this machine) or the work lives in one, run `openspec store list --json` to discover registered store ids, then pass `--store <id>` on the commands that read or write specs and changes (`new change`, `status`, `instructions`, `list`, `show`, `validate`, `archive`, `doctor`, `context`). Other commands do not take the flag. Hints printed by commands already carry the flag; keep it on follow-ups. Without a store, commands act on the nearest local `openspec/` root.
-
-**Input**: Optionally specify a change name (e.g., `/opsx:apply add-auth`). If omitted, check if it can be inferred from conversation context. If vague or ambiguous you MUST prompt for available changes.
-
-**Steps**
-
-1. **Select the change**
-
-   If a name is provided, use it. Otherwise:
-   - Infer from conversation context if the user mentioned a change
-   - Auto-select if only one active change exists
-   - If ambiguous, run `openspec list --json` to get available changes and use the **AskUserQuestion tool** to let the user select
-
-   Always announce: "Using change: <name>" and how to override (e.g., `/opsx:apply <other>`).
-
-2. **Check status to understand the schema**
-   ```bash
-   openspec status --change "<name>" --json
-   ```
-   Parse the JSON to understand:
-   - `schemaName`: The workflow being used (e.g., "spec-driven")
-   - `planningHome`, `changeRoot`, and `actionContext`: planning scope and edit constraints
-   - Which artifact contains the tasks (typically "tasks" for spec-driven, check status for others)
-
-3. **Get apply instructions**
-
-   ```bash
-   openspec instructions apply --change "<name>" --json
-   ```
-
-   This returns:
-   - `contextFiles`: artifact ID -> array of concrete file paths (varies by schema)
-   - Progress (total, complete, remaining)
-   - Task list with status
-   - Dynamic instruction based on current state
-
-   **Handle states:**
-   - If `state: "blocked"` (missing artifacts): show message, suggest using `/opsx:continue`
-   - If `state: "all_done"`: congratulate, suggest archive
-   - Otherwise: proceed to implementation
-
-4. **Read context files**
-
-   Read every file path listed under `contextFiles` from the apply instructions output.
-   The files depend on the schema being used:
-   - **spec-driven**: proposal, specs, design, tasks
-   - Other schemas: follow the contextFiles from CLI output
-
-5. **Show current progress**
-
-   Display:
-   - Schema being used
-   - Progress: "N/M tasks complete"
-   - Remaining tasks overview
-   - Dynamic instruction from CLI
-
-6. **Implement tasks (loop until done or blocked)**
-
-   For each pending task:
-   - Show which task is being worked on
-   - Make the code changes required
-   - Keep changes minimal and focused
-   - Mark task complete in the tasks file: `- [ ]` → `- [x]`
-   - Continue to next task
-
-   **Pause if:**
-   - Task is unclear → ask for clarification
-   - Implementation reveals a design issue → suggest updating artifacts
-   - Error or blocker encountered → report and wait for guidance
-   - User interrupts
-
-7. **On completion or pause, show status**
-
-   Display:
-   - Tasks completed this session
-   - Overall progress: "N/M tasks complete"
-   - If all done: suggest archive
-   - If paused: explain why and wait for guidance
-
-**Output During Implementation**
-
-```
-## Implementing: <change-name> (schema: <schema-name>)
-
-Working on task 3/7: <task description>
-[...implementation happening...]
-✓ Task complete
-
-Working on task 4/7: <task description>
-[...implementation happening...]
-✓ Task complete
-```
-
-**Output On Completion**
-
-```
-## Implementation Complete
-
-**Change:** <change-name>
-**Schema:** <schema-name>
-**Progress:** 7/7 tasks complete ✓
-
-### Completed This Session
-- [x] Task 1
-- [x] Task 2
-...
-
-All tasks complete! You can archive this change with `/opsx:archive`.
-```
-
-**Output On Pause (Issue Encountered)**
-
-```
-## Implementation Paused
-
-**Change:** <change-name>
-**Schema:** <schema-name>
-**Progress:** 4/7 tasks complete
-
-### Issue Encountered
-<description of the issue>
-
-**Options:**
-1. <option 1>
-2. <option 2>
-3. Other approach
-
-What would you like to do?
-```
-
-**Guardrails**
-- Keep going through tasks until done or blocked
-- Always read context files before starting (from the apply instructions output)
-- If task is ambiguous, pause and ask before implementing
-- If implementation reveals issues, pause and suggest artifact updates
-- Keep code changes minimal and scoped to each task
-- Update task checkbox immediately after completing each task
-- Pause on errors, blockers, or unclear requirements - don't guess
-- Use contextFiles from CLI output, don't assume specific file names
-
-**Fluid Workflow Integration**
-
-This skill supports the "actions on a change" model:
-
-- **Can be invoked anytime**: Before all artifacts are done (if tasks exist), after partial implementation, interleaved with other actions
-- **Allows artifact updates**: If implementation reveals design issues, suggest updating artifacts - not phase-locked, work fluidly
+---
+name: "OPSX: Apply"
+description: Implement tasks from an OpenSpec change (Experimental)
+category: Workflow
+tags: [workflow, artifacts, experimental]
+---
+
+Implement tasks from an OpenSpec change.
+
+**Store selection:** If the user names a store (a store is a standalone OpenSpec repo registered on this machine) or the work lives in one, run `openspec store list --json` to discover registered store ids, then pass `--store <id>` on the commands that read or write specs and changes (`new change`, `status`, `instructions`, `list`, `show`, `validate`, `archive`, `doctor`, `context`). Other commands do not take the flag. Hints printed by commands already carry the flag; keep it on follow-ups. Without a store, commands act on the nearest local `openspec/` root.
+
+**Input**: Optionally specify a change name (e.g., `/opsx:apply add-auth`). If omitted, check if it can be inferred from conversation context. If vague or ambiguous you MUST prompt for available changes.
+
+**Steps**
+
+1. **Select the change**
+
+   If a name is provided, use it. Otherwise:
+   - Infer from conversation context if the user mentioned a change
+   - Auto-select if only one active change exists
+   - If ambiguous, run `openspec list --json` to get available changes and use the **AskUserQuestion tool** to let the user select
+
+   Always announce: "Using change: <name>" and how to override (e.g., `/opsx:apply <other>`).
+
+2. **Check status to understand the schema**
+   ```bash
+   openspec status --change "<name>" --json
+   ```
+   Parse the JSON to understand:
+   - `schemaName`: The workflow being used (e.g., "spec-driven")
+   - `planningHome`, `changeRoot`, and `actionContext`: planning scope and edit constraints
+   - Which artifact contains the tasks (typically "tasks" for spec-driven, check status for others)
+
+3. **Get apply instructions**
+
+   ```bash
+   openspec instructions apply --change "<name>" --json
+   ```
+
+   This returns:
+   - `contextFiles`: artifact ID -> array of concrete file paths (varies by schema)
+   - Progress (total, complete, remaining)
+   - Task list with status
+   - Dynamic instruction based on current state
+
+   **Handle states:**
+   - If `state: "blocked"` (missing artifacts): show message, suggest using `/opsx:continue`
+   - If `state: "all_done"`: congratulate, suggest archive
+   - Otherwise: proceed to implementation
+
+4. **Read context files**
+
+   Read every file path listed under `contextFiles` from the apply instructions output.
+   The files depend on the schema being used:
+   - **spec-driven**: proposal, specs, design, tasks
+   - Other schemas: follow the contextFiles from CLI output
+
+5. **Show current progress**
+
+   Display:
+   - Schema being used
+   - Progress: "N/M tasks complete"
+   - Remaining tasks overview
+   - Dynamic instruction from CLI
+
+6. **Implement tasks (loop until done or blocked)**
+
+   For each pending task:
+   - Show which task is being worked on
+   - Make the code changes required
+   - Keep changes minimal and focused
+   - Mark task complete in the tasks file: `- [ ]` → `- [x]`
+   - Continue to next task
+
+   **Pause if:**
+   - Task is unclear → ask for clarification
+   - Implementation reveals a design issue → suggest updating artifacts
+   - Error or blocker encountered → report and wait for guidance
+   - User interrupts
+
+7. **On completion or pause, show status**
+
+   Display:
+   - Tasks completed this session
+   - Overall progress: "N/M tasks complete"
+   - If all done: suggest archive
+   - If paused: explain why and wait for guidance
+
+**Output During Implementation**
+
+```
+## Implementing: <change-name> (schema: <schema-name>)
+
+Working on task 3/7: <task description>
+[...implementation happening...]
+✓ Task complete
+
+Working on task 4/7: <task description>
+[...implementation happening...]
+✓ Task complete
+```
+
+**Output On Completion**
+
+```
+## Implementation Complete
+
+**Change:** <change-name>
+**Schema:** <schema-name>
+**Progress:** 7/7 tasks complete ✓
+
+### Completed This Session
+- [x] Task 1
+- [x] Task 2
+...
+
+All tasks complete! You can archive this change with `/opsx:archive`.
+```
+
+**Output On Pause (Issue Encountered)**
+
+```
+## Implementation Paused
+
+**Change:** <change-name>
+**Schema:** <schema-name>
+**Progress:** 4/7 tasks complete
+
+### Issue Encountered
+<description of the issue>
+
+**Options:**
+1. <option 1>
+2. <option 2>
+3. Other approach
+
+What would you like to do?
+```
+
+**Guardrails**
+- Keep going through tasks until done or blocked
+- Always read context files before starting (from the apply instructions output)
+- If task is ambiguous, pause and ask before implementing
+- If implementation reveals issues, pause and suggest artifact updates
+- Keep code changes minimal and scoped to each task
+- Update task checkbox immediately after completing each task
+- Pause on errors, blockers, or unclear requirements - don't guess
+- Use contextFiles from CLI output, don't assume specific file names
+
+**Fluid Workflow Integration**
+
+This skill supports the "actions on a change" model:
+
+- **Can be invoked anytime**: Before all artifacts are done (if tasks exist), after partial implementation, interleaved with other actions
+- **Allows artifact updates**: If implementation reveals design issues, suggest updating artifacts - not phase-locked, work fluidly

package/.claude/commands/opsx/archive.md

@@ -1,160 +1,160 @@
----
-name: "OPSX: Archive"
-description: Archive a completed change in the experimental workflow
-category: Workflow
-tags: [workflow, archive, experimental]
----
-
-Archive a completed change in the experimental workflow.
-
-**Store selection:** If the user names a store (a store is a standalone OpenSpec repo registered on this machine) or the work lives in one, run `openspec store list --json` to discover registered store ids, then pass `--store <id>` on the commands that read or write specs and changes (`new change`, `status`, `instructions`, `list`, `show`, `validate`, `archive`, `doctor`, `context`). Other commands do not take the flag. Hints printed by commands already carry the flag; keep it on follow-ups. Without a store, commands act on the nearest local `openspec/` root.
-
-**Input**: Optionally specify a change name after `/opsx:archive` (e.g., `/opsx:archive add-auth`). If omitted, check if it can be inferred from conversation context. If vague or ambiguous you MUST prompt for available changes.
-
-**Steps**
-
-1. **If no change name provided, prompt for selection**
-
-   Run `openspec list --json` to get available changes. Use the **AskUserQuestion tool** to let the user select.
-
-   Show only active changes (not already archived).
-   Include the schema used for each change if available.
-
-   **IMPORTANT**: Do NOT guess or auto-select a change. Always let the user choose.
-
-2. **Check artifact completion status**
-
-   Run `openspec status --change "<name>" --json` to check artifact completion.
-
-   Parse the JSON to understand:
-   - `schemaName`: The workflow being used
-   - `planningHome`, `changeRoot`, `artifactPaths`, and `actionContext`: path and scope context
-   - `artifacts`: List of artifacts with their status (`done` or other)
-
-   **If any artifacts are not `done`:**
-   - Display warning listing incomplete artifacts
-   - Prompt user for confirmation to continue
-   - Proceed if user confirms
-
-3. **Check task completion status**
-
-   Read the tasks file (typically `tasks.md`) to check for incomplete tasks.
-
-   Count tasks marked with `- [ ]` (incomplete) vs `- [x]` (complete).
-
-   **If incomplete tasks found:**
-   - Display warning showing count of incomplete tasks
-   - Prompt user for confirmation to continue
-   - Proceed if user confirms
-
-   **If no tasks file exists:** Proceed without task-related warning.
-
-4. **Assess delta spec sync state**
-
-   Use `artifactPaths.specs.existingOutputPaths` from status JSON to check for delta specs. If none exist, proceed without sync prompt.
-
-   **If delta specs exist:**
-   - Compare each delta spec with its corresponding main spec at `openspec/specs/<capability>/spec.md`
-   - Determine what changes would be applied (adds, modifications, removals, renames)
-   - Show a combined summary before prompting
-
-   **Prompt options:**
-   - If changes needed: "Sync now (recommended)", "Archive without syncing"
-   - If already synced: "Archive now", "Sync anyway", "Cancel"
-
-   If user chooses sync, use Task tool (subagent_type: "general-purpose", prompt: "Use Skill tool to invoke openspec-sync-specs for change '<name>'. Delta spec analysis: <include the analyzed delta spec summary>"). Proceed to archive regardless of choice.
-
-5. **Perform the archive**
-
-   Create an `archive` directory under `planningHome.changesDir` if it doesn't exist:
-   ```bash
-   mkdir -p "<planningHome.changesDir>/archive"
-   ```
-
-   Generate target name using current date: `YYYY-MM-DD-<change-name>`
-
-   **Check if target already exists:**
-   - If yes: Fail with error, suggest renaming existing archive or using different date
-   - If no: Move `changeRoot` to the archive directory
-
-   ```bash
-   mv "<changeRoot>" "<planningHome.changesDir>/archive/YYYY-MM-DD-<name>"
-   ```
-
-6. **Display summary**
-
-   Show archive completion summary including:
-   - Change name
-   - Schema that was used
-   - Archive location
-   - Spec sync status (synced / sync skipped / no delta specs)
-   - Note about any warnings (incomplete artifacts/tasks)
-
-**Output On Success**
-
-```
-## Archive Complete
-
-**Change:** <change-name>
-**Schema:** <schema-name>
-**Archived to:** the archive path derived from `planningHome.changesDir`/YYYY-MM-DD-<name>/
-**Specs:** ✓ Synced to main specs
-
-All artifacts complete. All tasks complete.
-```
-
-**Output On Success (No Delta Specs)**
-
-```
-## Archive Complete
-
-**Change:** <change-name>
-**Schema:** <schema-name>
-**Archived to:** the archive path derived from `planningHome.changesDir`/YYYY-MM-DD-<name>/
-**Specs:** No delta specs
-
-All artifacts complete. All tasks complete.
-```
-
-**Output On Success With Warnings**
-
-```
-## Archive Complete (with warnings)
-
-**Change:** <change-name>
-**Schema:** <schema-name>
-**Archived to:** the archive path derived from `planningHome.changesDir`/YYYY-MM-DD-<name>/
-**Specs:** Sync skipped (user chose to skip)
-
-**Warnings:**
-- Archived with 2 incomplete artifacts
-- Archived with 3 incomplete tasks
-- Delta spec sync was skipped (user chose to skip)
-
-Review the archive if this was not intentional.
-```
-
-**Output On Error (Archive Exists)**
-
-```
-## Archive Failed
-
-**Change:** <change-name>
-**Target:** the archive path derived from `planningHome.changesDir`/YYYY-MM-DD-<name>/
-
-Target archive directory already exists.
-
-**Options:**
-1. Rename the existing archive
-2. Delete the existing archive if it's a duplicate
-3. Wait until a different date to archive
-```
-
-**Guardrails**
-- Always prompt for change selection if not provided
-- Use artifact graph (openspec status --json) for completion checking
-- Don't block archive on warnings - just inform and confirm
-- Preserve .openspec.yaml when moving to archive (it moves with the directory)
-- Show clear summary of what happened
-- If sync is requested, use the Skill tool to invoke `openspec-sync-specs` (agent-driven)
-- If delta specs exist, always run the sync assessment and show the combined summary before prompting
+---
+name: "OPSX: Archive"
+description: Archive a completed change in the experimental workflow
+category: Workflow
+tags: [workflow, archive, experimental]
+---
+
+Archive a completed change in the experimental workflow.
+
+**Store selection:** If the user names a store (a store is a standalone OpenSpec repo registered on this machine) or the work lives in one, run `openspec store list --json` to discover registered store ids, then pass `--store <id>` on the commands that read or write specs and changes (`new change`, `status`, `instructions`, `list`, `show`, `validate`, `archive`, `doctor`, `context`). Other commands do not take the flag. Hints printed by commands already carry the flag; keep it on follow-ups. Without a store, commands act on the nearest local `openspec/` root.
+
+**Input**: Optionally specify a change name after `/opsx:archive` (e.g., `/opsx:archive add-auth`). If omitted, check if it can be inferred from conversation context. If vague or ambiguous you MUST prompt for available changes.
+
+**Steps**
+
+1. **If no change name provided, prompt for selection**
+
+   Run `openspec list --json` to get available changes. Use the **AskUserQuestion tool** to let the user select.
+
+   Show only active changes (not already archived).
+   Include the schema used for each change if available.
+
+   **IMPORTANT**: Do NOT guess or auto-select a change. Always let the user choose.
+
+2. **Check artifact completion status**
+
+   Run `openspec status --change "<name>" --json` to check artifact completion.
+
+   Parse the JSON to understand:
+   - `schemaName`: The workflow being used
+   - `planningHome`, `changeRoot`, `artifactPaths`, and `actionContext`: path and scope context
+   - `artifacts`: List of artifacts with their status (`done` or other)
+
+   **If any artifacts are not `done`:**
+   - Display warning listing incomplete artifacts
+   - Prompt user for confirmation to continue
+   - Proceed if user confirms
+
+3. **Check task completion status**
+
+   Read the tasks file (typically `tasks.md`) to check for incomplete tasks.
+
+   Count tasks marked with `- [ ]` (incomplete) vs `- [x]` (complete).
+
+   **If incomplete tasks found:**
+   - Display warning showing count of incomplete tasks
+   - Prompt user for confirmation to continue
+   - Proceed if user confirms
+
+   **If no tasks file exists:** Proceed without task-related warning.
+
+4. **Assess delta spec sync state**
+
+   Use `artifactPaths.specs.existingOutputPaths` from status JSON to check for delta specs. If none exist, proceed without sync prompt.
+
+   **If delta specs exist:**
+   - Compare each delta spec with its corresponding main spec at `openspec/specs/<capability>/spec.md`
+   - Determine what changes would be applied (adds, modifications, removals, renames)
+   - Show a combined summary before prompting
+
+   **Prompt options:**
+   - If changes needed: "Sync now (recommended)", "Archive without syncing"
+   - If already synced: "Archive now", "Sync anyway", "Cancel"
+
+   If user chooses sync, use Task tool (subagent_type: "general-purpose", prompt: "Use Skill tool to invoke openspec-sync-specs for change '<name>'. Delta spec analysis: <include the analyzed delta spec summary>"). Proceed to archive regardless of choice.
+
+5. **Perform the archive**
+
+   Create an `archive` directory under `planningHome.changesDir` if it doesn't exist:
+   ```bash
+   mkdir -p "<planningHome.changesDir>/archive"
+   ```
+
+   Generate target name using current date: `YYYY-MM-DD-<change-name>`
+
+   **Check if target already exists:**
+   - If yes: Fail with error, suggest renaming existing archive or using different date
+   - If no: Move `changeRoot` to the archive directory
+
+   ```bash
+   mv "<changeRoot>" "<planningHome.changesDir>/archive/YYYY-MM-DD-<name>"
+   ```
+
+6. **Display summary**
+
+   Show archive completion summary including:
+   - Change name
+   - Schema that was used
+   - Archive location
+   - Spec sync status (synced / sync skipped / no delta specs)
+   - Note about any warnings (incomplete artifacts/tasks)
+
+**Output On Success**
+
+```
+## Archive Complete
+
+**Change:** <change-name>
+**Schema:** <schema-name>
+**Archived to:** the archive path derived from `planningHome.changesDir`/YYYY-MM-DD-<name>/
+**Specs:** ✓ Synced to main specs
+
+All artifacts complete. All tasks complete.
+```
+
+**Output On Success (No Delta Specs)**
+
+```
+## Archive Complete
+
+**Change:** <change-name>
+**Schema:** <schema-name>
+**Archived to:** the archive path derived from `planningHome.changesDir`/YYYY-MM-DD-<name>/
+**Specs:** No delta specs
+
+All artifacts complete. All tasks complete.
+```
+
+**Output On Success With Warnings**
+
+```
+## Archive Complete (with warnings)
+
+**Change:** <change-name>
+**Schema:** <schema-name>
+**Archived to:** the archive path derived from `planningHome.changesDir`/YYYY-MM-DD-<name>/
+**Specs:** Sync skipped (user chose to skip)
+
+**Warnings:**
+- Archived with 2 incomplete artifacts
+- Archived with 3 incomplete tasks
+- Delta spec sync was skipped (user chose to skip)
+
+Review the archive if this was not intentional.
+```
+
+**Output On Error (Archive Exists)**
+
+```
+## Archive Failed
+
+**Change:** <change-name>
+**Target:** the archive path derived from `planningHome.changesDir`/YYYY-MM-DD-<name>/
+
+Target archive directory already exists.
+
+**Options:**
+1. Rename the existing archive
+2. Delete the existing archive if it's a duplicate
+3. Wait until a different date to archive
+```
+
+**Guardrails**
+- Always prompt for change selection if not provided
+- Use artifact graph (openspec status --json) for completion checking
+- Don't block archive on warnings - just inform and confirm
+- Preserve .openspec.yaml when moving to archive (it moves with the directory)
+- Show clear summary of what happened
+- If sync is requested, use the Skill tool to invoke `openspec-sync-specs` (agent-driven)
+- If delta specs exist, always run the sync assessment and show the combined summary before prompting