@things-factory/figure-ui 10.1.65 → 10.1.67

package/translations/en.json

@@ -3,8 +3,6 @@
   "figure.button.add-clip": "add clip",
   "figure.button.add-key": "add key",
   "figure.button.add-parameter": "add parameter",
-  "figure.button.apply-fix": "apply fix · {part} {axis} face: {from} → {to}",
-  "figure.button.apply-recommended-fix": "apply recommended fix",
   "figure.button.ask": "ask",
   "figure.button.cancel": "cancel",
   "figure.button.center-x": "centre X",
@@ -27,22 +25,15 @@
   "figure.button.move-part-down": "move down",
   "figure.button.move-part-up": "move up",
   "figure.button.new-figure": "new figure",
-  "figure.button.pivot-clear": "part centre",
-  "figure.button.pivot-set": "set",
   "figure.button.pose-as-default": "make this the default pose",
-  "figure.button.preview-fix": "preview fix · {part} {axis} face: {from} → {to}",
   "figure.button.release-figure": "release",
-  "figure.button.restore-released-base": "restore the previous model width",
-  "figure.button.keep-changed-appearance": "publish with the adjusted width",
   "figure.button.remove": "remove",
   "figure.button.remove-part": "delete",
   "figure.button.reset-view": "reset",
   "figure.button.revert": "revert",
   "figure.button.save": "save",
   "figure.button.see-the-trend-chart": "see the trend chart",
-  "figure.button.settle-on-floor": "settle on the floor",
   "figure.button.snap": "snap",
-  "figure.button.take-n-changes": "apply {n}",
   "figure.label.declared-space": "declared space",
   "figure.label.follows-expression": "set by an expression",
   "figure.label.gizmo-rotate": "turn",
@@ -79,45 +70,16 @@
   "figure.text.instance-range-can-widen": "measured again with the parts as they are: {ranges} mm.",
   "figure.text.size-range-too-small": "below {mm} mm on {axis} the {part} part has no length, yet the figure is declared to be placed smaller, so this change cannot be made. use \"measure again\" under the sizes it can be placed at.",
   "figure.text.size-range-too-large": "above {mm} mm on {axis} the {part} part cannot be drawn, yet the figure is declared to be placed larger, so this change cannot be made. use \"measure again\" under the sizes it can be placed at.",
+  "figure.text.input-range-size": "figure size {axis} can only be set between {min} and {max} mm. value given: {value} mm",
+  "figure.text.input-range": "this value can only be set between {min} and {max}. value given: {value}",
   "figure.text.mounting-face-needs-space": "declare the space first to choose one.",
   "figure.text.part-is-referenced": "'{part}' cannot be deleted: another part is fastened to it or follows its size. Undo that link first.",
   "figure.text.part-name-invalid": "'{name}' cannot be a part name. Start with a letter and use letters, digits, - and _.",
   "figure.text.part-name-taken": "'{name}' is already used in this figure.",
   "figure.text.placement-redeclares": "changing it declares the space again from the parts as they are now.",
-  "figure.text.recommended-fix-explained": "{n} changes rechecked against every resize case. They apply to this draft only; review and save when ready.",
   "figure.text.show-affected-parts": "show affected parts",
   "figure.button.to-floor": "to floor",
   "figure.label.accepts": "accepts",
-  "figure.label.anchor": "anchored face",
-  "figure.label.anchor-advanced": "advanced proportional sizing",
-  "figure.label.anchor-aspect-x": "grows only as much as x does (keeps ratio)",
-  "figure.label.anchor-aspect-y": "grows only as much as y does (keeps ratio)",
-  "figure.label.anchor-aspect-z": "grows only as much as z does (keeps ratio)",
-  "figure.label.anchor-auto": "automatic ({rule})",
-  "figure.label.anchor-center": "stays centred, keeps its size",
-  "figure.label.anchor-choice-aspect-x": "keep X ratio",
-  "figure.label.anchor-choice-aspect-y": "keep Y ratio",
-  "figure.label.anchor-choice-aspect-z": "keep Z ratio",
-  "figure.label.anchor-choice-auto": "automatic",
-  "figure.label.anchor-choice-center": "stay centred",
-  "figure.label.anchor-choice-max-x": "right face",
-  "figure.label.anchor-choice-max-y": "upper face",
-  "figure.label.anchor-choice-max-z": "front face",
-  "figure.label.anchor-choice-min-x": "left face",
-  "figure.label.anchor-choice-min-y": "lower face",
-  "figure.label.anchor-choice-min-z": "back face",
-  "figure.label.anchor-choice-scale": "grow together",
-  "figure.label.anchor-choice-span": "fill both faces",
-  "figure.label.anchor-max": "stays on the upper face",
-  "figure.label.anchor-max-x": "stays on the right face",
-  "figure.label.anchor-max-y": "stays on the top face",
-  "figure.label.anchor-max-z": "stays on the front face",
-  "figure.label.anchor-min": "stays on the lower face",
-  "figure.label.anchor-min-x": "stays on the left face",
-  "figure.label.anchor-min-y": "stays on the bottom face",
-  "figure.label.anchor-min-z": "stays on the back face",
-  "figure.label.anchor-scale": "grows with the box",
-  "figure.label.anchor-span": "touches both faces, fills between",
   "figure.label.animation": "animation",
   "figure.label.assumed-drawing": "the drawing it goes on",
   "figure.label.axis-consistency": "visual consistency",
@@ -137,7 +99,6 @@
   "figure.label.axis-scale": "scale",
   "figure.label.axis-scale-short": "scale",
   "figure.label.axis-width": "width",
-  "figure.label.base-box": "base box (mm)",
   "figure.label.budget-groups": "groups (draw calls)",
   "figure.label.budget-independent": "independently moved parts",
   "figure.label.budget-parts": "part count",
@@ -146,20 +107,12 @@
   "figure.label.budget-triangles": "triangles",
   "figure.label.budgets": "budgets",
   "figure.label.by-axis": "maturity by item",
-  "figure.label.candidate-review": "candidate review",
   "figure.label.cast-shadow": "cast shadow",
   "figure.label.category": "category",
   "figure.label.ceiling-height": "ceiling height (mm)",
-  "figure.label.channel-path": "moves",
-  "figure.label.channel-pivot": "pivot",
-  "figure.label.channel-target": "part",
-  "figure.label.channel-target-joints": "joints",
-  "figure.label.channel-target-parts": "parts",
-  "figure.label.channels": "channels",
   "figure.label.clip-name": "clip name",
   "figure.label.clips": "animation (plays over time)",
   "figure.label.coordinate-ground": "coordinate ground",
-  "figure.label.corner-round": "corner round",
   "figure.label.detail-L": "detailed",
   "figure.label.detail-M": "normal",
   "figure.label.detail-S": "simple",
@@ -185,17 +138,12 @@
   "figure.label.figure-released": "released",
   "figure.label.figure-type": "type",
   "figure.label.findings": "findings",
-  "figure.label.flat-shading": "flat shading",
   "figure.label.follow-camera": "follow camera",
   "figure.label.guides": "guides",
   "figure.label.help": "help",
   "figure.label.hemisphere-light": "hemisphere light",
   "figure.label.history": "history",
-  "figure.label.hollow-floor": "floor thickness",
-  "figure.label.hollow-wall": "wall thickness",
   "figure.label.intensity": "intensity",
-  "figure.label.interpolation-linear": "smooth",
-  "figure.label.interpolation-step": "stepped",
   "figure.label.joint": "joint",
   "figure.label.joint-axis": "axis",
   "figure.label.joint-limit-max": "max",
@@ -211,7 +159,6 @@
   "figure.label.joint-type-prismatic": "slide",
   "figure.label.joint-type-revolute": "turn within limits",
   "figure.label.joint-value": "joint value",
-  "figure.label.keep-round": "section",
   "figure.label.key-at": "at (s)",
   "figure.label.key-at-value": "at (0–1)",
   "figure.label.key-light": "key light",
@@ -237,19 +184,11 @@
   "figure.label.palette-purpose-warning": "warning signal · an attention-needed indicator",
   "figure.label.palette-role": "color role",
   "figure.label.palette-token": "palette token",
-  "figure.label.parameter-default": "default",
-  "figure.label.parameter-duration": "full travel (s)",
-  "figure.label.parameter-name": "parameter name",
-  "figure.label.parameter-range": "range",
-  "figure.label.parameters": "parameters (pose set by value)",
   "figure.label.part": "part",
   "figure.label.part-material": "material",
   "figure.label.part-position": "position (centre)",
   "figure.label.part-size": "size",
   "figure.label.parts": "parts",
-  "figure.label.path-rotation": "rotation",
-  "figure.label.path-scale": "scale",
-  "figure.label.path-translation": "offset",
   "figure.label.placement": "position and size",
   "figure.label.placement-ceiling": "ceiling-based (ceiling)",
   "figure.label.placement-center": "center-based (center)",
@@ -268,15 +207,10 @@
   "figure.label.primitive-cube": "box",
   "figure.label.primitive-cylinder": "cylinder",
   "figure.label.primitive-polygon": "polygon",
-  "figure.label.primitive-rect": "rectangle",
   "figure.label.primitive-sphere": "sphere",
   "figure.label.primitive-wall": "wall",
   "figure.label.properties": "properties",
   "figure.label.proposed": "proposed",
-  "figure.label.recipe-conveyor": "conveyor rollers keep turning",
-  "figure.label.recipe-gate": "a door or gate opens",
-  "figure.label.recipe-lift": "a lift changes height",
-  "figure.label.recipe-pusher": "a pusher moves into place",
   "figure.label.release": "release",
   "figure.label.release-verdict": "release check",
   "figure.label.released-versions": "released versions",
@@ -286,10 +220,6 @@
   "figure.label.repeat-pitch": "pitch",
   "figure.label.reuse-trend": "reuse trend",
   "figure.label.instance-count": "instance count",
-  "figure.label.role-in-capability": "role in the capability",
-  "figure.label.role-port-in": "inbound port",
-  "figure.label.role-port-out": "outbound port",
-  "figure.label.role-slot": "slot",
   "figure.label.rotation-degrees": "rotation (degrees)",
   "figure.label.rung-flow": "things flow through",
   "figure.label.rung-hold": "holds things",
@@ -304,13 +234,7 @@
   "figure.label.shape": "shape",
   "figure.label.shape-detail": "shape detail",
   "figure.label.shapes": "shapes",
-  "figure.label.sizing-fixed": "keeps its size",
-  "figure.label.sizing-repeat": "repeats",
-  "figure.label.sizing-scale": "scales proportionally",
-  "figure.label.sizing-stretch": "stretches on one axis",
   "figure.label.sky-color": "sky color",
-  "figure.label.slot-capacity": "capacity",
-  "figure.label.slots-and-ports": "slots and ports",
   "figure.label.state": "state",
   "figure.label.status-colors": "lit colors (lamps · indicators)",
   "figure.label.tab-capability": "capability",
@@ -328,14 +252,9 @@
   "figure.text.add-a-shape": "click to add a part",
   "figure.text.all-lights-off": "both lights are off; only emissive surfaces show.",
   "figure.text.already-released-edit-to-release-again": "already released. edit and save to go back to draft, then release again.",
-  "figure.text.anchor-explained": "where this part stays as the box grows. two touching parts on different faces drift apart as it grows.",
-  "figure.text.anchors-are-not-drawn": "slots and ports are not drawn on a drawing; only the editor shows them.",
   "figure.text.animation-empty-examples": "a turning roller · a sliding door leaf · a rising lift · a blinking beacon.",
   "figure.text.animation-empty-what-it-is": "no motion yet. add a clip to move parts.",
-  "figure.text.animation-needs-a-named-part": "add a part first.",
-  "figure.text.assistant-proposed-a-figure": "the proposal is shown on the right.",
   "figure.text.axes-not-measurable-yet": "left off the chart because they cannot be measured: {axes}. the reasons are below.",
-  "figure.text.base-box-explained": "The box that sets the scale when the figure is placed on a drawing. A part reaching outside it blocks release. Changing the size leaves the parts where they are.",
   "figure.text.bound-by-groups": "Part groups fill up first — this figure is {per} groups, and one screen draws {budget} groups at 60fps.",
   "figure.text.bound-by-triangles": "triangles reach the limit first ({per} per instance, {budget} per drawing).",
   "figure.text.budget-measured-on": "Measured on {gpu}, {on}. A figure standing still costs nothing — only what is on screen and redrawn counts.",
@@ -354,31 +273,17 @@
   "figure.text.verdict-waiting": "the check follows your edits.",
   "figure.text.canvas-appears-once-a-part-exists": "pick a shape on the left to add the first part.",
   "figure.text.capability-hand-written": "set by hand, so it matches none of the levels above. it is saved under the names below.",
-  "figure.text.capacity-from-repeat": "capacity comes from the repeat setting and the instance size",
   "figure.text.category-explained": "how the palette groups figures. one per figure.",
   "figure.text.category-placeholder": "e.g. conveyor",
   "figure.text.ceiling-height-explained": "the height a ceiling figure hangs from in the preview.",
   "figure.text.center-on-x": "move to the centre of the base box on X.",
   "figure.text.center-on-z": "move to the centre of the base box on Z.",
-  "figure.text.change-added": "a new part",
-  "figure.text.change-animations": "animations",
-  "figure.text.change-base": "the base size",
-  "figure.text.change-capabilities": "capabilities",
-  "figure.text.change-changed": "a changed part",
-  "figure.text.change-detail": "the detail level",
-  "figure.text.change-joints": "joints",
-  "figure.text.change-placement": "placement",
-  "figure.text.change-removed": "a part being removed",
-  "figure.text.change-styleKit": "the style kit",
-  "figure.text.channel-target-is-gone": "no such part. if you renamed the part, pick it again here.",
   "figure.text.clip-is-time-running": "plays over time. the value an instance gives is the playback speed.",
   "figure.text.clip-name-is-how-it-is-driven": "an instance gives a speed by this name.",
   "figure.text.clip-name-taken": "another clip already has this name. enter a different name.",
-  "figure.text.clip-needs-a-channel": "add at least one channel.",
   "figure.text.clip-needs-a-name": "enter a name.",
   "figure.text.collapse-parts-pane": "collapse the part list",
   "figure.text.collapse-properties-pane": "collapse the property pane",
-  "figure.text.contract-not-compared": "Could not check whether this change breaks what is already placed — {why}",
   "figure.text.coordinate-ground-explained": "draws the origin and a grid on the floor",
   "figure.text.delete-figure-confirm": "delete {name}? drawings already using this type will no longer find it.",
   "figure.text.designate-in-properties": "nothing designated yet. select a part and set its role in the properties tab.",
@@ -398,7 +303,6 @@
   "figure.text.figure-type-example": "e.g. OHT, AGV_LIFTER",
   "figure.text.figure-type-placeholder": "Figure type identifier (e.g. OHT)",
   "figure.text.find-by-this-tag": "find by this tag",
-  "figure.text.fit-base-explained": "Shrinks the box to the smallest one holding every part. The centre stays put, so a part sitting off-centre leaves room on the other side.",
   "figure.text.fits-n-instances": "up to {n}",
   "figure.text.floor-explained": "overlaps the coordinate ground, so it is usually off",
   "figure.text.follow-camera-explained": "turn off to fix the shadow direction",
@@ -417,19 +321,8 @@
   "figure.text.independent-parts-cost": "each part that carries its own transform adds one draw call.",
   "figure.text.independent-parts-over": "over the limit. fewer of these fit on one screen at once.",
   "figure.text.instances-unit": "instances",
-  "figure.text.interpolation-explained": "how the gap between keys is filled.",
-  "figure.text.joint-channel-value-deg": "key values are joint angles in degrees.",
-  "figure.text.joint-channel-value-mm": "key values are joint travel in mm.",
-  "figure.text.joint-driven-by": "parameter \"{name}\" moves this joint. check it in the preview.",
   "figure.text.joint-explained": "when the part it is attached to moves, this part moves with it. a joint sets the axis this part turns about or slides along relative to that part, and its limits. a parameter created with the joint sets its value.",
-  "figure.text.joint-limits-must-include-zero": "the limits must include 0. the pose as drawn is 0.",
-  "figure.text.joint-not-driven": "no parameter moves this joint. add one in the animation tab.",
   "figure.text.joint-value-beyond-limits": "outside the joint limits.",
-  "figure.text.keep-round-cost": "1 draw call",
-  "figure.text.keep-round-merged": "merged into a group",
-  "figure.text.keep-round-off": "off",
-  "figure.text.keep-round-on": "keep round",
-  "figure.text.keys-must-rise": "each key must come after the one before it.",
   "figure.text.limit-comes-from-level": "the detail level sets this limit.",
   "figure.text.maturity-blocked-no-binding": "state display is not measured yet.",
   "figure.text.maturity-blocked-no-detail-level": "the V3 format has no detail level. the budgets and placement scale above take its place.",
@@ -448,8 +341,6 @@
   "figure.text.more-segment-options": "advanced segment counts",
   "figure.text.motion-intent-help": "pick the part to move, then what it is for. the motion it makes can be adjusted in the advanced editor below.",
   "figure.text.must-fix-to-release": "fix these first",
-  "figure.text.choose-appearance-change": "choose how to handle the adjusted model width",
-  "figure.text.appearance-choice-explained": "Restore returns X and Z to the previous release while retaining Y and all other edits. Publishing with the adjusted width keeps the current model outline.",
   "figure.text.n-of-limit": "{used} / {limit}",
   "figure.text.n-parts-at-most": "up to {limit} parts",
   "figure.text.n-triangles": "{count} triangles",
@@ -461,47 +352,23 @@
   "figure.text.on-by-default-explained": "the starting state when placed on a drawing. a value set on the instance takes priority.",
   "figure.text.other-segment-count": "enter a value",
   "figure.text.palette-purpose-explained": "choose the color role this part plays on screen.",
-  "figure.text.parameter-curve-is-the-value-axis": "keys sit on the value (0 = minimum, 1 = maximum). full travel time is set separately.",
-  "figure.text.parameter-duration-empty-is-instant": "seconds to move from minimum to maximum. leave empty to apply a new value at once.",
-  "figure.text.parameter-is-a-value-not-a-timeline": "shows the pose for the value an instance gives (e.g. hoist 1200mm down).",
-  "figure.text.parameter-key-within-span": "enter a key between 0 (minimum) and 1 (maximum).",
-  "figure.text.parameter-name-is-how-a-value-arrives": "an instance gives a value by this name.",
-  "figure.text.parameter-needs-a-name": "enter a name.",
   "figure.text.part-limit-reached": "the detail level allows no more parts — raise the level or remove a part.",
   "figure.text.part-limit-reached-short": "level {level} allows {limit} parts. raise the level or remove a part.",
   "figure.text.part-name-cannot-be-empty": "give the part a name.",
-  "figure.text.path-rotation-unit": "euler angles in degrees, the same convention as the part's rotation.",
-  "figure.text.path-scale-unit": "a ratio. 1 is full size; 0 makes the part vanish.",
-  "figure.text.path-translation-unit": "offset from where the part sits. 0 leaves it in place.",
   "figure.text.pick-a-shape-above-to-start": "pick a shape above to add the first part.",
-  "figure.text.picked-changes-do-not-validate": "the selected changes do not make a valid figure",
-  "figure.text.pivot-defaults-to-the-part-centre": "left unset, the part turns about its own centre. coordinates are local to the part.",
   "figure.text.placement-explained": "sets the anchor plane in 3D scene (floor: AGV/conveyor, ceiling: OHT/hoist, center: sensor/drone).",
   "figure.text.pose-as-default-explained": "Writes the pose you have set as the parameters’ defaults, so the figure stands like this when nobody gives it a value.",
   "figure.text.preview-blocked-by-errors": "cannot show the preview because of format errors. see the maturity tab for the reason.",
   "figure.text.preview-needs-a-part": "add a part to see how it looks placed on a drawing.",
-  "figure.text.proposal-feedback-note": "optional note for the next suggestion (this session only)",
-  "figure.text.proposal-feedback-placeholder": "e.g. keep the silhouette, but make the port easier to read",
   "figure.text.put-on-floor": "drop it to the floor (Z=0).",
   "figure.text.range-needs-room": "the maximum must be above the minimum.",
-  "figure.text.recipe-conveyor": "animation · an instance gives it a speed",
-  "figure.text.recipe-gate": "parameter · an instance gives how far open, 0 to 100 %",
-  "figure.text.recipe-lift": "parameter · an instance gives the height, 0 to 100 mm",
-  "figure.text.recipe-pusher": "parameter · an instance gives the travel, 0 to 100 mm",
-  "figure.text.release-check-fix": "release check fix · {part} {axis} face: {from} → {to}",
   "figure.text.release-needs-a-save-first": "there are unsaved changes. save first.",
   "figure.text.releasing": "releasing…",
   "figure.text.renaming-a-part-breaks-bindings": "renaming breaks bindings on instances already placed.",
-  "figure.text.repeat-count-capped": "up to {limit}. each copy adds one draw call.",
-  "figure.text.repeat-count-now": "{count} at the authored size",
-  "figure.text.repeat-edits-the-unit": "repeated copies are edited as one. to change a single copy, add it as a separate part.",
-  "figure.text.repeat-grows-with-instance": "the count grows as the instance grows on this axis. the pitch stays",
-  "figure.text.repeat-keeps-count": "the count stays and each copy grows.",
   "figure.text.repeat-pitch-explained": "centre-to-centre distance. it stays when the part size changes.",
   "figure.text.report-appears-when-you-add-a-part": "shows triangles, draw calls, and how many fit on one drawing. measured once you make a part.",
   "figure.text.reuse-score-explained": "how much headroom is left in the declared limits. the one closest to its cap sets the score.",
   "figure.text.revert-to-version-confirm": "revert to v{version}? what you are editing will be replaced by that version.",
-  "figure.text.role-none-means-drawn": "with none checked this is just a drawn part",
   "figure.text.rung-flow-note": "holds things and takes them in and out through ports. conveyors, chutes, sorters",
   "figure.text.rung-hold-note": "has slots to put things in. racks, pallets, benches",
   "figure.text.rung-none-note": "takes nothing. most figures belong here",
@@ -514,20 +381,12 @@
   "figure.text.server-returned-no-data": "the server response had no data. try again.",
   "figure.text.show-all-parts": "show all",
   "figure.text.show-this-part": "show this part again",
-  "figure.text.sizing-costs-one-draw-call": "a part that does not scale proportionally adds one draw call.",
-  "figure.text.sizing-fixed-explained": "the size stays, only the position follows — like a motor or a gauge.",
-  "figure.text.sizing-repeat-explained": "the count grows instead of the size. each copy adds one draw call.",
-  "figure.text.sizing-scale-explained": "this part grows with the instance.",
-  "figure.text.sizing-stretch-explained": "only one axis stretches — like a frame, a belt or a rail.",
-  "figure.text.slots-need-capability": "select \"holds things\" or above before designating a slot.",
   "figure.text.snap-explained": "rounds position and size to the grid — the same spacing you see on the canvas.",
-  "figure.text.source-changed-ask-again": "the source changed. discard the candidate and ask again in AI assist.",
   "figure.text.tags-explained": "tags used for search. separate several with commas.",
   "figure.text.tags-placeholder": "e.g. outbound, automatic, level 2",
   "figure.text.thumbnail-not-made-yet": "no thumbnail yet",
   "figure.text.tools-explained": "from left: centre X, centre Z, to floor, mirror X, mirror Z, snap to grid.",
   "figure.text.triangle-count": "{count} triangles",
-  "figure.text.two-keys-at-least": "add at least two keys.",
   "figure.text.type-name-already-taken": "the type name {type} is already in use. pick another one.",
   "figure.text.type-name-cannot-change": "the type name cannot be changed after creation.",
   "figure.text.type-name-will-not-release": "this name cannot be released. use capitals, digits and single underscores, 3 to 32 characters (e.g. AGV_LIFTER).",