@things-factory/figure-ui 10.1.28 → 10.1.29

package/translations/ko.json

@@ -85,8 +85,8 @@
   "figure.label.axis-scale-short": "규모",
   "figure.label.axis-width": "가로",
   "figure.label.base-box": "기준 상자 (mm)",
-  "figure.label.budget-animations": "움직이는 부품",
   "figure.label.budget-groups": "재질 그룹",
+  "figure.label.budget-independent": "따로 움직이는 부품",
   "figure.label.budget-parts": "부품 수",
   "figure.label.budget-surface": "팔레트 외 표면",
   "figure.label.budget-transparent": "투명 재질",
@@ -113,8 +113,6 @@
   "figure.label.distinct-materials": "서로 다른 재질",
   "figure.label.distinct-shapes": "서로 다른 형상",
   "figure.label.draft": "초안",
-  "figure.label.draw-calls-at-100": "100개 기준 draw call",
-  "figure.label.draw-calls-at-10k": "1만개 기준 draw call",
   "figure.label.emissive": "자체발광",
   "figure.label.emissive-color": "켜진 색",
   "figure.label.environment": "환경",
@@ -263,8 +261,6 @@
   "figure.label.tools": "맞추기",
   "figure.label.transparent": "투명",
   "figure.label.triangles": "삼각형",
-  "figure.label.triangles-at-100": "100개 기준 삼각형",
-  "figure.label.triangles-at-10k": "1만개 기준 삼각형",
   "figure.label.unit-none": "단위 없음",
   "figure.label.unit-type-it": "직접 적기…",
   "figure.label.weight": "그리는 비용",
@@ -276,8 +272,6 @@
   "figure.text.already-released-edit-to-release-again": "이미 발행되어 있습니다. 고쳐서 저장하면 초안으로 돌아가고, 그때 다시 발행할 수 있습니다.",
   "figure.text.anchor-explained": "상자가 커질 때 이 부품이 어디에 붙어 있을지입니다. 맞댄 부품과 다른 면에 붙어 있으면 커질 때 사이가 벌어집니다.",
   "figure.text.anchors-are-not-drawn": "슬롯과 포트는 도면에 그려지지 않고 편집 화면에만 표시됩니다.",
-  "figure.text.animated-parts-cost": "움직이는 부품마다 draw call 이 1 늘어납니다.",
-  "figure.text.animated-parts-over": "한도를 넘었습니다. 한 도면에 여러 개 놓으면 화면이 느려집니다.",
   "figure.text.animation-empty-examples": "도는 롤러 · 미끄러지는 문짝 · 오르내리는 리프트 · 깜빡이는 표시등.",
   "figure.text.animation-empty-what-it-is": "아직 움직임이 없습니다. clip 을 추가해 부품을 움직이세요.",
   "figure.text.animation-needs-a-named-part": "부품을 먼저 추가하세요.",
@@ -344,6 +338,8 @@
   "figure.text.hide-all-parts": "모두 감추기",
   "figure.text.hide-this-part": "이 부품을 잠깐 가립니다. 저장되지 않습니다",
   "figure.text.how-many-fit": "한 화면에 보여도 느려지지 않는 수",
+  "figure.text.independent-parts-cost": "따로 움직이는 부품마다 draw call 이 하나 늘어납니다.",
+  "figure.text.independent-parts-over": "한도를 넘었습니다. 한 화면에 함께 세울 수 있는 대수가 그만큼 줍니다.",
   "figure.text.instances-unit": "개",
   "figure.text.interpolation-explained": "키프레임 사이를 어떻게 잇습니까.",
   "figure.text.joint-channel-value-deg": "키 값은 관절 각도(도)입니다.",

package/translations/ms.json

@@ -85,8 +85,8 @@
   "figure.label.axis-scale-short": "scale",
   "figure.label.axis-width": "width",
   "figure.label.base-box": "kotak asas (mm)",
-  "figure.label.budget-animations": "animation points",
   "figure.label.budget-groups": "material groups",
+  "figure.label.budget-independent": "bahagian yang bergerak sendiri",
   "figure.label.budget-parts": "part count",
   "figure.label.budget-surface": "surfaces outside the palette",
   "figure.label.budget-transparent": "transparent materials",
@@ -113,8 +113,6 @@
   "figure.label.distinct-materials": "distinct materials",
   "figure.label.distinct-shapes": "distinct shapes",
   "figure.label.draft": "draf",
-  "figure.label.draw-calls-at-100": "draw calls for 100",
-  "figure.label.draw-calls-at-10k": "draw calls at 10k instances",
   "figure.label.emissive": "emissive",
   "figure.label.emissive-color": "lit color",
   "figure.label.environment": "environment",
@@ -263,8 +261,6 @@
   "figure.label.tools": "align",
   "figure.label.transparent": "transparent",
   "figure.label.triangles": "triangles",
-  "figure.label.triangles-at-100": "triangles for 100",
-  "figure.label.triangles-at-10k": "triangles at 10k instances",
   "figure.label.unit-none": "tiada unit",
   "figure.label.unit-type-it": "taip sendiri…",
   "figure.label.weight": "weight",
@@ -276,8 +272,6 @@
   "figure.text.already-released-edit-to-release-again": "sudah diterbitkan. sunting dan simpan untuk kembali ke draf, kemudian terbitkan semula.",
   "figure.text.anchor-explained": "muka tempat bahagian ini kekal apabila kotak membesar. dua bahagian yang bersentuhan pada muka berbeza akan terpisah apabila membesar.",
   "figure.text.anchors-are-not-drawn": "slot dan port tidak dilukis pada lukisan; hanya editor yang memaparkannya.",
-  "figure.text.animated-parts-cost": "setiap bahagian yang bergerak menambah satu draw call.",
-  "figure.text.animated-parts-over": "melebihi had. banyak daripada ini pada satu lukisan akan melambatkannya.",
   "figure.text.animation-empty-examples": "penggelek berputar · daun pintu gelongsor · lif naik · lampu isyarat berkelip.",
   "figure.text.animation-empty-what-it-is": "belum ada gerakan. tambah clip untuk menggerakkan bahagian.",
   "figure.text.animation-needs-a-named-part": "tambah bahagian dahulu.",
@@ -344,6 +338,8 @@
   "figure.text.hide-all-parts": "hide all",
   "figure.text.hide-this-part": "hide this part while you work. not saved",
   "figure.text.how-many-fit": "berapa banyak boleh ada di skrin sebelum ia perlahan",
+  "figure.text.independent-parts-cost": "setiap bahagian yang bergerak sendiri menambah satu draw call.",
+  "figure.text.independent-parts-over": "melebihi had. lebih sedikit daripada ini muat pada satu skrin.",
   "figure.text.instances-unit": "instances",
   "figure.text.interpolation-explained": "cara jurang antara kunci diisi.",
   "figure.text.joint-channel-value-deg": "nilai kunci ialah sudut sendi dalam darjah.",

package/translations/zh.json

@@ -85,8 +85,8 @@
   "figure.label.axis-scale-short": "scale",
   "figure.label.axis-width": "width",
   "figure.label.base-box": "基准盒 (mm)",
-  "figure.label.budget-animations": "animation points",
   "figure.label.budget-groups": "material groups",
+  "figure.label.budget-independent": "单独运动的部件",
   "figure.label.budget-parts": "part count",
   "figure.label.budget-surface": "surfaces outside the palette",
   "figure.label.budget-transparent": "transparent materials",
@@ -113,8 +113,6 @@
   "figure.label.distinct-materials": "distinct materials",
   "figure.label.distinct-shapes": "distinct shapes",
   "figure.label.draft": "草稿",
-  "figure.label.draw-calls-at-100": "draw calls for 100",
-  "figure.label.draw-calls-at-10k": "draw calls at 10k instances",
   "figure.label.emissive": "emissive",
   "figure.label.emissive-color": "lit color",
   "figure.label.environment": "environment",
@@ -263,8 +261,6 @@
   "figure.label.tools": "align",
   "figure.label.transparent": "transparent",
   "figure.label.triangles": "triangles",
-  "figure.label.triangles-at-100": "triangles for 100",
-  "figure.label.triangles-at-10k": "triangles at 10k instances",
   "figure.label.unit-none": "无单位",
   "figure.label.unit-type-it": "直接输入…",
   "figure.label.weight": "weight",
@@ -276,8 +272,6 @@
   "figure.text.already-released-edit-to-release-again": "已经发布。修改并保存会回到草稿，然后可以再次发布。",
   "figure.text.anchor-explained": "包围盒放大时此部件贴住的面。与相邻部件贴在不同的面上时，放大后两者之间会出现间隙。",
   "figure.text.anchors-are-not-drawn": "槽位和端口不会绘制在图面上，只在编辑画面中显示。",
-  "figure.text.animated-parts-cost": "每个运动部件增加 1 个 draw call。",
-  "figure.text.animated-parts-over": "已超过上限。在一个图面上放置多个会使画面变慢。",
   "figure.text.animation-empty-examples": "转动的滚轮 · 滑动的门扇 · 升降的升降机 · 闪烁的指示灯。",
   "figure.text.animation-empty-what-it-is": "还没有动作。添加 clip 来移动部件。",
   "figure.text.animation-needs-a-named-part": "请先添加部件。",
@@ -344,6 +338,8 @@
   "figure.text.hide-all-parts": "hide all",
   "figure.text.hide-this-part": "hide this part while you work. not saved",
   "figure.text.how-many-fit": "同屏显示而不变慢的数量",
+  "figure.text.independent-parts-cost": "每个单独运动的部件增加 1 个 draw call。",
+  "figure.text.independent-parts-over": "已超过上限。一个画面上能同时放置的台数会减少。",
   "figure.text.instances-unit": "instances",
   "figure.text.interpolation-explained": "关键帧之间如何衔接。",
   "figure.text.joint-channel-value-deg": "关键帧的值是关节角度（度）。",