@scrypted/libav 1.0.167 → 1.0.169

package/opus/include/opus_custom.h

@@ -0,0 +1,381 @@
+/* Copyright (c) 2007-2008 CSIRO
+   Copyright (c) 2007-2009 Xiph.Org Foundation
+   Copyright (c) 2008-2012 Gregory Maxwell
+   Written by Jean-Marc Valin and Gregory Maxwell */
+/*
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
+   OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+/**
+  @file opus_custom.h
+  @brief Opus-Custom reference implementation API
+ */
+
+#ifndef OPUS_CUSTOM_H
+#define OPUS_CUSTOM_H
+
+#include "opus_defines.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef CUSTOM_MODES
+# define OPUS_CUSTOM_EXPORT OPUS_EXPORT
+# define OPUS_CUSTOM_EXPORT_STATIC OPUS_EXPORT
+#else
+# define OPUS_CUSTOM_EXPORT
+# ifdef OPUS_BUILD
+#  define OPUS_CUSTOM_EXPORT_STATIC static OPUS_INLINE
+# else
+#  define OPUS_CUSTOM_EXPORT_STATIC
+# endif
+#endif
+
+/** @defgroup opus_custom Opus Custom
+  * @{
+  *  Opus Custom is an optional part of the Opus specification and
+  * reference implementation which uses a distinct API from the regular
+  * API and supports frame sizes that are not normally supported.\ Use
+  * of Opus Custom is discouraged for all but very special applications
+  * for which a frame size different from 2.5, 5, 10, or 20 ms is needed
+  * (for either complexity or latency reasons) and where interoperability
+  * is less important.
+  *
+  * In addition to the interoperability limitations the use of Opus custom
+  * disables a substantial chunk of the codec and generally lowers the
+  * quality available at a given bitrate. Normally when an application needs
+  * a different frame size from the codec it should buffer to match the
+  * sizes but this adds a small amount of delay which may be important
+  * in some very low latency applications. Some transports (especially
+  * constant rate RF transports) may also work best with frames of
+  * particular durations.
+  *
+  * Libopus only supports custom modes if they are enabled at compile time.
+  *
+  * The Opus Custom API is similar to the regular API but the
+  * @ref opus_encoder_create and @ref opus_decoder_create calls take
+  * an additional mode parameter which is a structure produced by
+  * a call to @ref opus_custom_mode_create. Both the encoder and decoder
+  * must create a mode using the same sample rate (fs) and frame size
+  * (frame size) so these parameters must either be signaled out of band
+  * or fixed in a particular implementation.
+  *
+  * Similar to regular Opus the custom modes support on the fly frame size
+  * switching, but the sizes available depend on the particular frame size in
+  * use. For some initial frame sizes on a single on the fly size is available.
+  */
+
+/** Contains the state of an encoder. One encoder state is needed
+    for each stream. It is initialized once at the beginning of the
+    stream. Do *not* re-initialize the state for every frame.
+   @brief Encoder state
+ */
+typedef struct OpusCustomEncoder OpusCustomEncoder;
+
+/** State of the decoder. One decoder state is needed for each stream.
+    It is initialized once at the beginning of the stream. Do *not*
+    re-initialize the state for every frame.
+   @brief Decoder state
+ */
+typedef struct OpusCustomDecoder OpusCustomDecoder;
+
+/** The mode contains all the information necessary to create an
+    encoder. Both the encoder and decoder need to be initialized
+    with exactly the same mode, otherwise the output will be
+    corrupted. The mode MUST NOT BE DESTROYED until the encoders and
+    decoders that use it are destroyed as well.
+   @brief Mode configuration
+ */
+typedef struct OpusCustomMode OpusCustomMode;
+
+/** Creates a new mode struct. This will be passed to an encoder or
+  * decoder. The mode MUST NOT BE DESTROYED until the encoders and
+  * decoders that use it are destroyed as well.
+  * @param [in] Fs <tt>int</tt>: Sampling rate (8000 to 96000 Hz)
+  * @param [in] frame_size <tt>int</tt>: Number of samples (per channel) to encode in each
+  *        packet (64 - 1024, prime factorization must contain zero or more 2s, 3s, or 5s and no other primes)
+  * @param [out] error <tt>int*</tt>: Returned error code (if NULL, no error will be returned)
+  * @return A newly created mode
+  */
+OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT OpusCustomMode *opus_custom_mode_create(opus_int32 Fs, int frame_size, int *error);
+
+/** Destroys a mode struct. Only call this after all encoders and
+  * decoders using this mode are destroyed as well.
+  * @param [in] mode <tt>OpusCustomMode*</tt>: Mode to be freed.
+  */
+OPUS_CUSTOM_EXPORT void opus_custom_mode_destroy(OpusCustomMode *mode);
+
+
+#if !defined(OPUS_BUILD) || defined(CELT_ENCODER_C)
+
+/* Encoder */
+/** Gets the size of an OpusCustomEncoder structure.
+  * @param [in] mode <tt>OpusCustomMode *</tt>: Mode configuration
+  * @param [in] channels <tt>int</tt>: Number of channels
+  * @returns size
+  */
+OPUS_CUSTOM_EXPORT_STATIC OPUS_WARN_UNUSED_RESULT int opus_custom_encoder_get_size(
+    const OpusCustomMode *mode,
+    int channels
+) OPUS_ARG_NONNULL(1);
+
+# ifdef CUSTOM_MODES
+/** Initializes a previously allocated encoder state
+  * The memory pointed to by st must be the size returned by opus_custom_encoder_get_size.
+  * This is intended for applications which use their own allocator instead of malloc.
+  * @see opus_custom_encoder_create(),opus_custom_encoder_get_size()
+  * To reset a previously initialized state use the OPUS_RESET_STATE CTL.
+  * @param [in] st <tt>OpusCustomEncoder*</tt>: Encoder state
+  * @param [in] mode <tt>OpusCustomMode *</tt>: Contains all the information about the characteristics of
+  *  the stream (must be the same characteristics as used for the
+  *  decoder)
+  * @param [in] channels <tt>int</tt>: Number of channels
+  * @return OPUS_OK Success or @ref opus_errorcodes
+  */
+OPUS_CUSTOM_EXPORT int opus_custom_encoder_init(
+    OpusCustomEncoder *st,
+    const OpusCustomMode *mode,
+    int channels
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2);
+# endif
+#endif
+
+
+/** Creates a new encoder state. Each stream needs its own encoder
+  * state (can't be shared across simultaneous streams).
+  * @param [in] mode <tt>OpusCustomMode*</tt>: Contains all the information about the characteristics of
+  *  the stream (must be the same characteristics as used for the
+  *  decoder)
+  * @param [in] channels <tt>int</tt>: Number of channels
+  * @param [out] error <tt>int*</tt>: Returns an error code
+  * @return Newly created encoder state.
+*/
+OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT OpusCustomEncoder *opus_custom_encoder_create(
+    const OpusCustomMode *mode,
+    int channels,
+    int *error
+) OPUS_ARG_NONNULL(1);
+
+
+/** Destroys an encoder state.
+  * @param[in] st <tt>OpusCustomEncoder*</tt>: State to be freed.
+  */
+OPUS_CUSTOM_EXPORT void opus_custom_encoder_destroy(OpusCustomEncoder *st);
+
+/** Encodes a frame of audio.
+  * @param [in] st <tt>OpusCustomEncoder*</tt>: Encoder state
+  * @param [in] pcm <tt>float*</tt>: PCM audio in float format, with a normal range of +/-1.0.
+  *          Samples with a range beyond +/-1.0 are supported but will
+  *          be clipped by decoders using the integer API and should
+  *          only be used if it is known that the far end supports
+  *          extended dynamic range. There must be exactly
+  *          frame_size samples per channel.
+  * @param [in] frame_size <tt>int</tt>: Number of samples per frame of input signal
+  * @param [out] compressed <tt>char *</tt>: The compressed data is written here. This may not alias pcm and must be at least maxCompressedBytes long.
+  * @param [in] maxCompressedBytes <tt>int</tt>: Maximum number of bytes to use for compressing the frame
+  *          (can change from one frame to another)
+  * @return Number of bytes written to "compressed".
+  *       If negative, an error has occurred (see error codes). It is IMPORTANT that
+  *       the length returned be somehow transmitted to the decoder. Otherwise, no
+  *       decoding is possible.
+  */
+OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT int opus_custom_encode_float(
+    OpusCustomEncoder *st,
+    const float *pcm,
+    int frame_size,
+    unsigned char *compressed,
+    int maxCompressedBytes
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4);
+
+/** Encodes a frame of audio.
+  * @param [in] st <tt>OpusCustomEncoder*</tt>: Encoder state
+  * @param [in] pcm <tt>opus_int16*</tt>: PCM audio in signed 16-bit format (native endian).
+  *          There must be exactly frame_size samples per channel.
+  * @param [in] frame_size <tt>int</tt>: Number of samples per frame of input signal
+  * @param [out] compressed <tt>char *</tt>: The compressed data is written here. This may not alias pcm and must be at least maxCompressedBytes long.
+  * @param [in] maxCompressedBytes <tt>int</tt>: Maximum number of bytes to use for compressing the frame
+  *          (can change from one frame to another)
+  * @return Number of bytes written to "compressed".
+  *       If negative, an error has occurred (see error codes). It is IMPORTANT that
+  *       the length returned be somehow transmitted to the decoder. Otherwise, no
+  *       decoding is possible.
+ */
+OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT int opus_custom_encode(
+    OpusCustomEncoder *st,
+    const opus_int16 *pcm,
+    int frame_size,
+    unsigned char *compressed,
+    int maxCompressedBytes
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4);
+
+/** Encodes a frame of audio.
+  * @param [in] st <tt>OpusCustomEncoder*</tt>: Encoder state
+  * @param [in] pcm <tt>opus_int32*</tt>: PCM audio in signed 32-bit format (native endian) representing (or slightly exceeding) 24-bit values.
+  *          There must be exactly frame_size samples per channel.
+  * @param [in] frame_size <tt>int</tt>: Number of samples per frame of input signal
+  * @param [out] compressed <tt>char *</tt>: The compressed data is written here. This may not alias pcm and must be at least maxCompressedBytes long.
+  * @param [in] maxCompressedBytes <tt>int</tt>: Maximum number of bytes to use for compressing the frame
+  *          (can change from one frame to another)
+  * @return Number of bytes written to "compressed".
+  *       If negative, an error has occurred (see error codes). It is IMPORTANT that
+  *       the length returned be somehow transmitted to the decoder. Otherwise, no
+  *       decoding is possible.
+ */
+OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT int opus_custom_encode24(
+    OpusCustomEncoder *st,
+    const opus_int32 *pcm,
+    int frame_size,
+    unsigned char *compressed,
+    int maxCompressedBytes
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4);
+
+/** Perform a CTL function on an Opus custom encoder.
+  *
+  * Generally the request and subsequent arguments are generated
+  * by a convenience macro.
+  * @see opus_encoderctls
+  */
+OPUS_CUSTOM_EXPORT int opus_custom_encoder_ctl(OpusCustomEncoder * OPUS_RESTRICT st, int request, ...) OPUS_ARG_NONNULL(1);
+
+
+#if !defined(OPUS_BUILD) || defined(CELT_DECODER_C)
+/* Decoder */
+
+/** Gets the size of an OpusCustomDecoder structure.
+  * @param [in] mode <tt>OpusCustomMode *</tt>: Mode configuration
+  * @param [in] channels <tt>int</tt>: Number of channels
+  * @returns size
+  */
+OPUS_CUSTOM_EXPORT_STATIC OPUS_WARN_UNUSED_RESULT int opus_custom_decoder_get_size(
+    const OpusCustomMode *mode,
+    int channels
+) OPUS_ARG_NONNULL(1);
+
+/** Initializes a previously allocated decoder state
+  * The memory pointed to by st must be the size returned by opus_custom_decoder_get_size.
+  * This is intended for applications which use their own allocator instead of malloc.
+  * @see opus_custom_decoder_create(),opus_custom_decoder_get_size()
+  * To reset a previously initialized state use the OPUS_RESET_STATE CTL.
+  * @param [in] st <tt>OpusCustomDecoder*</tt>: Decoder state
+  * @param [in] mode <tt>OpusCustomMode *</tt>: Contains all the information about the characteristics of
+  *  the stream (must be the same characteristics as used for the
+  *  encoder)
+  * @param [in] channels <tt>int</tt>: Number of channels
+  * @return OPUS_OK Success or @ref opus_errorcodes
+  */
+OPUS_CUSTOM_EXPORT_STATIC int opus_custom_decoder_init(
+    OpusCustomDecoder *st,
+    const OpusCustomMode *mode,
+    int channels
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2);
+
+#endif
+
+
+/** Creates a new decoder state. Each stream needs its own decoder state (can't
+  * be shared across simultaneous streams).
+  * @param [in] mode <tt>OpusCustomMode</tt>: Contains all the information about the characteristics of the
+  *          stream (must be the same characteristics as used for the encoder)
+  * @param [in] channels <tt>int</tt>: Number of channels
+  * @param [out] error <tt>int*</tt>: Returns an error code
+  * @return Newly created decoder state.
+  */
+OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT OpusCustomDecoder *opus_custom_decoder_create(
+    const OpusCustomMode *mode,
+    int channels,
+    int *error
+) OPUS_ARG_NONNULL(1);
+
+/** Destroys a decoder state.
+  * @param[in] st <tt>OpusCustomDecoder*</tt>: State to be freed.
+  */
+OPUS_CUSTOM_EXPORT void opus_custom_decoder_destroy(OpusCustomDecoder *st);
+
+/** Decode an opus custom frame with floating point output
+  * @param [in] st <tt>OpusCustomDecoder*</tt>: Decoder state
+  * @param [in] data <tt>char*</tt>: Input payload. Use a NULL pointer to indicate packet loss
+  * @param [in] len <tt>int</tt>: Number of bytes in payload
+  * @param [out] pcm <tt>float*</tt>: Output signal (interleaved if 2 channels). length
+  *  is frame_size*channels*sizeof(float)
+  * @param [in] frame_size Number of samples per channel of available space in *pcm.
+  * @returns Number of decoded samples or @ref opus_errorcodes
+  */
+OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT int opus_custom_decode_float(
+    OpusCustomDecoder *st,
+    const unsigned char *data,
+    int len,
+    float *pcm,
+    int frame_size
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4);
+
+/** Decode an opus custom frame
+  * @param [in] st <tt>OpusCustomDecoder*</tt>: Decoder state
+  * @param [in] data <tt>char*</tt>: Input payload. Use a NULL pointer to indicate packet loss
+  * @param [in] len <tt>int</tt>: Number of bytes in payload
+  * @param [out] pcm <tt>opus_int16*</tt>: Output signal (interleaved if 2 channels). length
+  *  is frame_size*channels*sizeof(opus_int16)
+  * @param [in] frame_size Number of samples per channel of available space in *pcm.
+  * @returns Number of decoded samples or @ref opus_errorcodes
+  */
+OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT int opus_custom_decode(
+    OpusCustomDecoder *st,
+    const unsigned char *data,
+    int len,
+    opus_int16 *pcm,
+    int frame_size
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4);
+
+/** Decode an opus custom frame
+  * @param [in] st <tt>OpusCustomDecoder*</tt>: Decoder state
+  * @param [in] data <tt>char*</tt>: Input payload. Use a NULL pointer to indicate packet loss
+  * @param [in] len <tt>int</tt>: Number of bytes in payload
+  * @param [out] pcm <tt>opus_int32*</tt>: Output signal (interleaved if 2 channels) representing (or slightly exceeding) 24-bit values. length
+  *  is frame_size*channels*sizeof(opus_int32)
+  * @param [in] frame_size Number of samples per channel of available space in *pcm.
+  * @returns Number of decoded samples or @ref opus_errorcodes
+  */
+OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT int opus_custom_decode24(
+    OpusCustomDecoder *st,
+    const unsigned char *data,
+    int len,
+    opus_int32 *pcm,
+    int frame_size
+) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4);
+
+/** Perform a CTL function on an Opus custom decoder.
+  *
+  * Generally the request and subsequent arguments are generated
+  * by a convenience macro.
+  * @see opus_genericctls
+  */
+OPUS_CUSTOM_EXPORT int opus_custom_decoder_ctl(OpusCustomDecoder * OPUS_RESTRICT st, int request, ...) OPUS_ARG_NONNULL(1);
+
+/**@}*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* OPUS_CUSTOM_H */