@matter/types 0.13.0-alpha.0-20250318-c1aa38b08 → 0.13.0-alpha.0-20250323-770919c6a

package/dist/esm/clusters/fan-control.d.ts

@@ -233,8 +233,8 @@ export declare namespace FanControl {
     const MultiSpeedComponent: {
         readonly attributes: {
             /**
-             * Indicates that the fan has one speed (value of 1) or the maximum speed, if the fan is capable of
-             * multiple speeds.
+             * Indicates that the fan has one speed (value of 1) or the maximum speed, if the fan is capable of multiple
+             * speeds.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 4.4.6.5
              */
@@ -245,16 +245,16 @@ export declare namespace FanControl {
              * shall return INVALID_IN_STATE to indicate that the fan is not in a state where the SpeedSetting can be
              * changed to the requested value.
              *
-             * If this is successfully written to 0, the server shall set the FanMode attribute value to Off. Please
-             * see the Section 4.4.6.6.1 for details on other values.
+             * If this is successfully written to 0, the server shall set the FanMode attribute value to Off. Please see
+             * the Section 4.4.6.6.1 for details on other values.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 4.4.6.6
              */
             readonly speedSetting: WritableAttribute<number | null, any>;
             /**
-             * Indicates the actual currently operating fan speed, or zero to indicate that the fan is off. There may
-             * be a temporary mismatch between the value of this attribute and the value of the SpeedSetting attribute
-             * due to other system requirements that would not allow the fan to operate at the requested setting.
+             * Indicates the actual currently operating fan speed, or zero to indicate that the fan is off. There may be
+             * a temporary mismatch between the value of this attribute and the value of the SpeedSetting attribute due
+             * to other system requirements that would not allow the fan to operate at the requested setting.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 4.4.6.7
              */
@@ -290,9 +290,9 @@ export declare namespace FanControl {
              * only be set to 1, if the corresponding bit in the RockSupport attribute is set to 1, otherwise a status
              * code of CONSTRAINT_ERROR shall be returned.
              *
-             * If a combination of supported bits is set by the client, and the server does not support the
-             * combination, the lowest supported single bit in the combination shall be set and active, and all other
-             * bits shall indicate zero.
+             * If a combination of supported bits is set by the client, and the server does not support the combination,
+             * the lowest supported single bit in the combination shall be set and active, and all other bits shall
+             * indicate zero.
              *
              * For example: If RockUpDown and RockRound are both set, but this combination is not possible, then only
              * RockUpDown becomes active.
@@ -321,8 +321,8 @@ export declare namespace FanControl {
     const WindComponent: {
         readonly attributes: {
             /**
-             * This attribute is a bitmap that indicates what wind modes the server supports. At least one wind mode
-             * bit shall be set.
+             * This attribute is a bitmap that indicates what wind modes the server supports. At least one wind mode bit
+             * shall be set.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 4.4.6.10
              */
@@ -341,9 +341,9 @@ export declare namespace FanControl {
              * only be set to 1, if the corresponding bit in the WindSupport attribute is set to 1, otherwise a status
              * code of CONSTRAINT_ERROR shall be returned.
              *
-             * If a combination of supported bits is set by the client, and the server does not support the
-             * combination, the lowest supported single bit in the combination shall be set and active, and all other
-             * bits shall indicate zero.
+             * If a combination of supported bits is set by the client, and the server does not support the combination,
+             * the lowest supported single bit in the combination shall be set and active, and all other bits shall
+             * indicate zero.
              *
              * For example: If Sleep Wind and Natural Wind are set, but this combination is not possible, then only
              * Sleep Wind becomes active.
@@ -427,11 +427,11 @@ export declare namespace FanControl {
              *
              * Legacy Fan Control cluster revision 0-1 defined 3 speeds (low, medium and high) plus automatic speed
              * control but left it up to the implementer to decide what was supported. Therefore, it is assumed that
-             * legacy client implementations are capable of determining, from the server, the number of speeds
-             * supported between 1, 2, or 3, and whether automatic speed control is supported.
+             * legacy client implementations are capable of determining, from the server, the number of speeds supported
+             * between 1, 2, or 3, and whether automatic speed control is supported.
              *
-             * The MultiSpeed feature includes new attributes that support a running fan speed value from 0 to
-             * SpeedMax, which has a maximum of 100.
+             * The MultiSpeed feature includes new attributes that support a running fan speed value from 0 to SpeedMax,
+             * which has a maximum of 100.
              *
              * See Section 4.4.6.6.1 for more details.
              *
@@ -508,10 +508,10 @@ export declare namespace FanControl {
              */
             readonly percentSetting: WritableAttribute<number | null, any>;
             /**
-             * Indicates the actual currently operating fan speed, or zero to indicate that the fan is off. There may
-             * be a temporary mismatch between the value of this attribute and the value of the PercentSetting
-             * attribute due to other system requirements that would not allow the fan to operate at the requested
-             * setting. See Section 4.4.6.3.1 for more details.
+             * Indicates the actual currently operating fan speed, or zero to indicate that the fan is off. There may be
+             * a temporary mismatch between the value of this attribute and the value of the PercentSetting attribute
+             * due to other system requirements that would not allow the fan to operate at the requested setting. See
+             * Section 4.4.6.3.1 for more details.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 4.4.6.4
              */
@@ -528,8 +528,8 @@ export declare namespace FanControl {
             readonly component: {
                 readonly attributes: {
                     /**
-                     * Indicates that the fan has one speed (value of 1) or the maximum speed, if the fan is capable of
-                     * multiple speeds.
+                     * Indicates that the fan has one speed (value of 1) or the maximum speed, if the fan is capable of multiple
+                     * speeds.
                      *
                      * @see {@link MatterSpecification.v13.Cluster} § 4.4.6.5
                      */
@@ -540,16 +540,16 @@ export declare namespace FanControl {
                      * shall return INVALID_IN_STATE to indicate that the fan is not in a state where the SpeedSetting can be
                      * changed to the requested value.
                      *
-                     * If this is successfully written to 0, the server shall set the FanMode attribute value to Off. Please
-                     * see the Section 4.4.6.6.1 for details on other values.
+                     * If this is successfully written to 0, the server shall set the FanMode attribute value to Off. Please see
+                     * the Section 4.4.6.6.1 for details on other values.
                      *
                      * @see {@link MatterSpecification.v13.Cluster} § 4.4.6.6
                      */
                     readonly speedSetting: WritableAttribute<number | null, any>;
                     /**
-                     * Indicates the actual currently operating fan speed, or zero to indicate that the fan is off. There may
-                     * be a temporary mismatch between the value of this attribute and the value of the SpeedSetting attribute
-                     * due to other system requirements that would not allow the fan to operate at the requested setting.
+                     * Indicates the actual currently operating fan speed, or zero to indicate that the fan is off. There may be
+                     * a temporary mismatch between the value of this attribute and the value of the SpeedSetting attribute due
+                     * to other system requirements that would not allow the fan to operate at the requested setting.
                      *
                      * @see {@link MatterSpecification.v13.Cluster} § 4.4.6.7
                      */
@@ -586,9 +586,9 @@ export declare namespace FanControl {
                      * only be set to 1, if the corresponding bit in the RockSupport attribute is set to 1, otherwise a status
                      * code of CONSTRAINT_ERROR shall be returned.
                      *
-                     * If a combination of supported bits is set by the client, and the server does not support the
-                     * combination, the lowest supported single bit in the combination shall be set and active, and all other
-                     * bits shall indicate zero.
+                     * If a combination of supported bits is set by the client, and the server does not support the combination,
+                     * the lowest supported single bit in the combination shall be set and active, and all other bits shall
+                     * indicate zero.
                      *
                      * For example: If RockUpDown and RockRound are both set, but this combination is not possible, then only
                      * RockUpDown becomes active.
@@ -618,8 +618,8 @@ export declare namespace FanControl {
             readonly component: {
                 readonly attributes: {
                     /**
-                     * This attribute is a bitmap that indicates what wind modes the server supports. At least one wind mode
-                     * bit shall be set.
+                     * This attribute is a bitmap that indicates what wind modes the server supports. At least one wind mode bit
+                     * shall be set.
                      *
                      * @see {@link MatterSpecification.v13.Cluster} § 4.4.6.10
                      */
@@ -638,9 +638,9 @@ export declare namespace FanControl {
                      * only be set to 1, if the corresponding bit in the WindSupport attribute is set to 1, otherwise a status
                      * code of CONSTRAINT_ERROR shall be returned.
                      *
-                     * If a combination of supported bits is set by the client, and the server does not support the
-                     * combination, the lowest supported single bit in the combination shall be set and active, and all other
-                     * bits shall indicate zero.
+                     * If a combination of supported bits is set by the client, and the server does not support the combination,
+                     * the lowest supported single bit in the combination shall be set and active, and all other bits shall
+                     * indicate zero.
                      *
                      * For example: If Sleep Wind and Natural Wind are set, but this combination is not possible, then only
                      * Sleep Wind becomes active.
@@ -728,11 +728,11 @@ export declare namespace FanControl {
              *
              * Legacy Fan Control cluster revision 0-1 defined 3 speeds (low, medium and high) plus automatic speed
              * control but left it up to the implementer to decide what was supported. Therefore, it is assumed that
-             * legacy client implementations are capable of determining, from the server, the number of speeds
-             * supported between 1, 2, or 3, and whether automatic speed control is supported.
+             * legacy client implementations are capable of determining, from the server, the number of speeds supported
+             * between 1, 2, or 3, and whether automatic speed control is supported.
              *
-             * The MultiSpeed feature includes new attributes that support a running fan speed value from 0 to
-             * SpeedMax, which has a maximum of 100.
+             * The MultiSpeed feature includes new attributes that support a running fan speed value from 0 to SpeedMax,
+             * which has a maximum of 100.
              *
              * See Section 4.4.6.6.1 for more details.
              *
@@ -809,10 +809,10 @@ export declare namespace FanControl {
              */
             readonly percentSetting: WritableAttribute<number | null, any>;
             /**
-             * Indicates the actual currently operating fan speed, or zero to indicate that the fan is off. There may
-             * be a temporary mismatch between the value of this attribute and the value of the PercentSetting
-             * attribute due to other system requirements that would not allow the fan to operate at the requested
-             * setting. See Section 4.4.6.3.1 for more details.
+             * Indicates the actual currently operating fan speed, or zero to indicate that the fan is off. There may be
+             * a temporary mismatch between the value of this attribute and the value of the PercentSetting attribute
+             * due to other system requirements that would not allow the fan to operate at the requested setting. See
+             * Section 4.4.6.3.1 for more details.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 4.4.6.4
              */
@@ -829,8 +829,8 @@ export declare namespace FanControl {
             readonly component: {
                 readonly attributes: {
                     /**
-                     * Indicates that the fan has one speed (value of 1) or the maximum speed, if the fan is capable of
-                     * multiple speeds.
+                     * Indicates that the fan has one speed (value of 1) or the maximum speed, if the fan is capable of multiple
+                     * speeds.
                      *
                      * @see {@link MatterSpecification.v13.Cluster} § 4.4.6.5
                      */
@@ -841,16 +841,16 @@ export declare namespace FanControl {
                      * shall return INVALID_IN_STATE to indicate that the fan is not in a state where the SpeedSetting can be
                      * changed to the requested value.
                      *
-                     * If this is successfully written to 0, the server shall set the FanMode attribute value to Off. Please
-                     * see the Section 4.4.6.6.1 for details on other values.
+                     * If this is successfully written to 0, the server shall set the FanMode attribute value to Off. Please see
+                     * the Section 4.4.6.6.1 for details on other values.
                      *
                      * @see {@link MatterSpecification.v13.Cluster} § 4.4.6.6
                      */
                     readonly speedSetting: WritableAttribute<number | null, any>;
                     /**
-                     * Indicates the actual currently operating fan speed, or zero to indicate that the fan is off. There may
-                     * be a temporary mismatch between the value of this attribute and the value of the SpeedSetting attribute
-                     * due to other system requirements that would not allow the fan to operate at the requested setting.
+                     * Indicates the actual currently operating fan speed, or zero to indicate that the fan is off. There may be
+                     * a temporary mismatch between the value of this attribute and the value of the SpeedSetting attribute due
+                     * to other system requirements that would not allow the fan to operate at the requested setting.
                      *
                      * @see {@link MatterSpecification.v13.Cluster} § 4.4.6.7
                      */
@@ -887,9 +887,9 @@ export declare namespace FanControl {
                      * only be set to 1, if the corresponding bit in the RockSupport attribute is set to 1, otherwise a status
                      * code of CONSTRAINT_ERROR shall be returned.
                      *
-                     * If a combination of supported bits is set by the client, and the server does not support the
-                     * combination, the lowest supported single bit in the combination shall be set and active, and all other
-                     * bits shall indicate zero.
+                     * If a combination of supported bits is set by the client, and the server does not support the combination,
+                     * the lowest supported single bit in the combination shall be set and active, and all other bits shall
+                     * indicate zero.
                      *
                      * For example: If RockUpDown and RockRound are both set, but this combination is not possible, then only
                      * RockUpDown becomes active.
@@ -919,8 +919,8 @@ export declare namespace FanControl {
             readonly component: {
                 readonly attributes: {
                     /**
-                     * This attribute is a bitmap that indicates what wind modes the server supports. At least one wind mode
-                     * bit shall be set.
+                     * This attribute is a bitmap that indicates what wind modes the server supports. At least one wind mode bit
+                     * shall be set.
                      *
                      * @see {@link MatterSpecification.v13.Cluster} § 4.4.6.10
                      */
@@ -939,9 +939,9 @@ export declare namespace FanControl {
                      * only be set to 1, if the corresponding bit in the WindSupport attribute is set to 1, otherwise a status
                      * code of CONSTRAINT_ERROR shall be returned.
                      *
-                     * If a combination of supported bits is set by the client, and the server does not support the
-                     * combination, the lowest supported single bit in the combination shall be set and active, and all other
-                     * bits shall indicate zero.
+                     * If a combination of supported bits is set by the client, and the server does not support the combination,
+                     * the lowest supported single bit in the combination shall be set and active, and all other bits shall
+                     * indicate zero.
                      *
                      * For example: If Sleep Wind and Natural Wind are set, but this combination is not possible, then only
                      * Sleep Wind becomes active.
@@ -1040,11 +1040,11 @@ export declare namespace FanControl {
              *
              * Legacy Fan Control cluster revision 0-1 defined 3 speeds (low, medium and high) plus automatic speed
              * control but left it up to the implementer to decide what was supported. Therefore, it is assumed that
-             * legacy client implementations are capable of determining, from the server, the number of speeds
-             * supported between 1, 2, or 3, and whether automatic speed control is supported.
+             * legacy client implementations are capable of determining, from the server, the number of speeds supported
+             * between 1, 2, or 3, and whether automatic speed control is supported.
              *
-             * The MultiSpeed feature includes new attributes that support a running fan speed value from 0 to
-             * SpeedMax, which has a maximum of 100.
+             * The MultiSpeed feature includes new attributes that support a running fan speed value from 0 to SpeedMax,
+             * which has a maximum of 100.
              *
              * See Section 4.4.6.6.1 for more details.
              *
@@ -1202,11 +1202,11 @@ export declare namespace FanControl {
                  *
                  * Legacy Fan Control cluster revision 0-1 defined 3 speeds (low, medium and high) plus automatic speed
                  * control but left it up to the implementer to decide what was supported. Therefore, it is assumed that
-                 * legacy client implementations are capable of determining, from the server, the number of speeds
-                 * supported between 1, 2, or 3, and whether automatic speed control is supported.
+                 * legacy client implementations are capable of determining, from the server, the number of speeds supported
+                 * between 1, 2, or 3, and whether automatic speed control is supported.
                  *
-                 * The MultiSpeed feature includes new attributes that support a running fan speed value from 0 to
-                 * SpeedMax, which has a maximum of 100.
+                 * The MultiSpeed feature includes new attributes that support a running fan speed value from 0 to SpeedMax,
+                 * which has a maximum of 100.
                  *
                  * See Section 4.4.6.6.1 for more details.
                  *
@@ -1281,8 +1281,8 @@ export declare namespace FanControl {
     /**
      * This cluster supports all FanControl features. It may support illegal feature combinations.
      *
-     * If you use this cluster you must manually specify which features are active and ensure the set of active
-     * features is legal per the Matter specification.
+     * If you use this cluster you must manually specify which features are active and ensure the set of active features
+     * is legal per the Matter specification.
      */
     interface Complete extends Identity<typeof CompleteInstance> {
     }

package/dist/esm/clusters/fan-control.js

@@ -98,8 +98,8 @@ var FanControl;
   FanControl2.MultiSpeedComponent = MutableCluster.Component({
     attributes: {
       /**
-       * Indicates that the fan has one speed (value of 1) or the maximum speed, if the fan is capable of
-       * multiple speeds.
+       * Indicates that the fan has one speed (value of 1) or the maximum speed, if the fan is capable of multiple
+       * speeds.
        *
        * @see {@link MatterSpecification.v13.Cluster} § 4.4.6.5
        */
@@ -110,16 +110,16 @@ var FanControl;
        * shall return INVALID_IN_STATE to indicate that the fan is not in a state where the SpeedSetting can be
        * changed to the requested value.
        *
-       * If this is successfully written to 0, the server shall set the FanMode attribute value to Off. Please
-       * see the Section 4.4.6.6.1 for details on other values.
+       * If this is successfully written to 0, the server shall set the FanMode attribute value to Off. Please see
+       * the Section 4.4.6.6.1 for details on other values.
        *
        * @see {@link MatterSpecification.v13.Cluster} § 4.4.6.6
        */
       speedSetting: WritableAttribute(5, TlvNullable(TlvUInt8), { default: 0 }),
       /**
-       * Indicates the actual currently operating fan speed, or zero to indicate that the fan is off. There may
-       * be a temporary mismatch between the value of this attribute and the value of the SpeedSetting attribute
-       * due to other system requirements that would not allow the fan to operate at the requested setting.
+       * Indicates the actual currently operating fan speed, or zero to indicate that the fan is off. There may be
+       * a temporary mismatch between the value of this attribute and the value of the SpeedSetting attribute due
+       * to other system requirements that would not allow the fan to operate at the requested setting.
        *
        * @see {@link MatterSpecification.v13.Cluster} § 4.4.6.7
        */
@@ -139,9 +139,9 @@ var FanControl;
        * only be set to 1, if the corresponding bit in the RockSupport attribute is set to 1, otherwise a status
        * code of CONSTRAINT_ERROR shall be returned.
        *
-       * If a combination of supported bits is set by the client, and the server does not support the
-       * combination, the lowest supported single bit in the combination shall be set and active, and all other
-       * bits shall indicate zero.
+       * If a combination of supported bits is set by the client, and the server does not support the combination,
+       * the lowest supported single bit in the combination shall be set and active, and all other bits shall
+       * indicate zero.
        *
        * For example: If RockUpDown and RockRound are both set, but this combination is not possible, then only
        * RockUpDown becomes active.
@@ -154,8 +154,8 @@ var FanControl;
   FanControl2.WindComponent = MutableCluster.Component({
     attributes: {
       /**
-       * This attribute is a bitmap that indicates what wind modes the server supports. At least one wind mode
-       * bit shall be set.
+       * This attribute is a bitmap that indicates what wind modes the server supports. At least one wind mode bit
+       * shall be set.
        *
        * @see {@link MatterSpecification.v13.Cluster} § 4.4.6.10
        */
@@ -165,9 +165,9 @@ var FanControl;
        * only be set to 1, if the corresponding bit in the WindSupport attribute is set to 1, otherwise a status
        * code of CONSTRAINT_ERROR shall be returned.
        *
-       * If a combination of supported bits is set by the client, and the server does not support the
-       * combination, the lowest supported single bit in the combination shall be set and active, and all other
-       * bits shall indicate zero.
+       * If a combination of supported bits is set by the client, and the server does not support the combination,
+       * the lowest supported single bit in the combination shall be set and active, and all other bits shall
+       * indicate zero.
        *
        * For example: If Sleep Wind and Natural Wind are set, but this combination is not possible, then only
        * Sleep Wind becomes active.
@@ -218,11 +218,11 @@ var FanControl;
        *
        * Legacy Fan Control cluster revision 0-1 defined 3 speeds (low, medium and high) plus automatic speed
        * control but left it up to the implementer to decide what was supported. Therefore, it is assumed that
-       * legacy client implementations are capable of determining, from the server, the number of speeds
-       * supported between 1, 2, or 3, and whether automatic speed control is supported.
+       * legacy client implementations are capable of determining, from the server, the number of speeds supported
+       * between 1, 2, or 3, and whether automatic speed control is supported.
        *
-       * The MultiSpeed feature includes new attributes that support a running fan speed value from 0 to
-       * SpeedMax, which has a maximum of 100.
+       * The MultiSpeed feature includes new attributes that support a running fan speed value from 0 to SpeedMax,
+       * which has a maximum of 100.
        *
        * See Section 4.4.6.6.1 for more details.
        *
@@ -299,10 +299,10 @@ var FanControl;
        */
       percentSetting: WritableAttribute(2, TlvNullable(TlvPercent), { default: 0 }),
       /**
-       * Indicates the actual currently operating fan speed, or zero to indicate that the fan is off. There may
-       * be a temporary mismatch between the value of this attribute and the value of the PercentSetting
-       * attribute due to other system requirements that would not allow the fan to operate at the requested
-       * setting. See Section 4.4.6.3.1 for more details.
+       * Indicates the actual currently operating fan speed, or zero to indicate that the fan is off. There may be
+       * a temporary mismatch between the value of this attribute and the value of the PercentSetting attribute
+       * due to other system requirements that would not allow the fan to operate at the requested setting. See
+       * Section 4.4.6.3.1 for more details.
        *
        * @see {@link MatterSpecification.v13.Cluster} § 4.4.6.4
        */

package/dist/esm/clusters/fixed-label.d.ts

@@ -26,8 +26,8 @@ export declare namespace FixedLabel {
         };
     }, []>;
     /**
-     * This cluster is derived from the Label cluster and provides a feature for the device to tag an endpoint with
-     * zero or more read-only labels.
+     * This cluster is derived from the Label cluster and provides a feature for the device to tag an endpoint with zero
+     * or more read-only labels.
      *
      * Examples:
      *
@@ -42,8 +42,8 @@ export declare namespace FixedLabel {
      * knows which of the endpoints is which of the lights.
      *
      * Note that the TagList in the Descriptor cluster provides an alternative mechanism for such self- description
-     * using standardized tags rather than manufacturer-selected strings, yielding a standardized mechanism for
-     * features defined in the various namespaces. The second example above can be implemented using semantic tags
+     * using standardized tags rather than manufacturer-selected strings, yielding a standardized mechanism for features
+     * defined in the various namespaces. The second example above can be implemented using semantic tags
      * Direction.Upward and Direction.Downward instead of (or in addition to) the Fixed Label cluster.
      *
      * @see {@link MatterSpecification.v13.Core} § 9.8

package/dist/esm/clusters/formaldehyde-concentration-measurement.d.ts

@@ -202,8 +202,8 @@ export declare namespace FormaldehydeConcentrationMeasurement {
      * This cluster supports all FormaldehydeConcentrationMeasurement features. It may support illegal feature
      * combinations.
      *
-     * If you use this cluster you must manually specify which features are active and ensure the set of active
-     * features is legal per the Matter specification.
+     * If you use this cluster you must manually specify which features are active and ensure the set of active features
+     * is legal per the Matter specification.
      */
     const CompleteInstance: MutableCluster<{
         readonly id: 1067;