@matter/types 0.13.0-alpha.0-20250318-c1aa38b08 → 0.13.0-alpha.0-20250323-770919c6a

package/src/clusters/boolean-state-configuration.ts

@@ -51,9 +51,8 @@ export namespace BooleanStateConfiguration {
          * AlarmSuppress (SPRS)
          *
          * This feature shall indicate that the device is able to suppress the supported alarm modes, when the user
-         * acknowledges the alarm. This is intended to stop visual and/or audible alarms, when the user has become
-         * aware that the sensor is triggered, but it is no longer desired to have the alarm modes active on the
-         * device, e.g.:
+         * acknowledges the alarm. This is intended to stop visual and/or audible alarms, when the user has become aware
+         * that the sensor is triggered, but it is no longer desired to have the alarm modes active on the device, e.g.:
          *
          *   • The triggering cause have been resolved by the user, but the sensor has not yet stopped detecting the
          *     triggering cause.
@@ -64,8 +63,8 @@ export namespace BooleanStateConfiguration {
          * Acknowledge of alarms will for the remainder of this cluster be referred to as suppress.
          *
          * A suppressed alarm is still considered active and will remain so unless it is actively disabled or the
-         * triggering condition is not longer present. The action of suppressing an alarm mode is only applicable to
-         * and is intended to stop the physical alarming, e.g. emitting a sound or blinking a light; it does not impact
+         * triggering condition is not longer present. The action of suppressing an alarm mode is only applicable to and
+         * is intended to stop the physical alarming, e.g. emitting a sound or blinking a light; it does not impact
          * alarm reporting in AlarmsActive.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 1.8.4.1
@@ -124,8 +123,8 @@ export namespace BooleanStateConfiguration {
      */
     export const TlvAlarmsStateChangedEvent = TlvObject({
         /**
-         * This field shall indicate the state of active alarm modes, as indicated by the AlarmsActive attribute, at
-         * the time the event was generated.
+         * This field shall indicate the state of active alarm modes, as indicated by the AlarmsActive attribute, at the
+         * time the event was generated.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 1.8.8.1.1
          */
@@ -313,9 +312,9 @@ export namespace BooleanStateConfiguration {
     export const AlarmSuppressComponent = MutableCluster.Component({
         attributes: {
             /**
-             * Indicates which specific alarm modes on the server are currently suppressed. When the sensor is no
-             * longer triggered, this attribute shall be set to the unsuppressed state, by setting the bit to 0, for
-             * all supported alarm modes.
+             * Indicates which specific alarm modes on the server are currently suppressed. When the sensor is no longer
+             * triggered, this attribute shall be set to the unsuppressed state, by setting the bit to 0, for all
+             * supported alarm modes.
              *
              * If an alarm mode is not supported, the bit indicating this alarm mode shall always be 0. A bit shall
              * indicate whether the alarm mode is suppressed or not:
@@ -368,8 +367,8 @@ export namespace BooleanStateConfiguration {
              * aware that the sensor is triggered, but it is no longer desired to have the alarm modes active on the
              * device, e.g.:
              *
-             *   • The triggering cause have been resolved by the user, but the sensor has not yet stopped detecting
-             *     the triggering cause.
+             *   • The triggering cause have been resolved by the user, but the sensor has not yet stopped detecting the
+             *     triggering cause.
              *
              *   • The user is not able to address the triggering cause, but is aware of the alarm and
              *     suppress/acknowledge it be addressed at a later point.
@@ -377,8 +376,8 @@ export namespace BooleanStateConfiguration {
              * Acknowledge of alarms will for the remainder of this cluster be referred to as suppress.
              *
              * A suppressed alarm is still considered active and will remain so unless it is actively disabled or the
-             * triggering condition is not longer present. The action of suppressing an alarm mode is only applicable
-             * to and is intended to stop the physical alarming, e.g. emitting a sound or blinking a light; it does not
+             * triggering condition is not longer present. The action of suppressing an alarm mode is only applicable to
+             * and is intended to stop the physical alarming, e.g. emitting a sound or blinking a light; it does not
              * impact alarm reporting in AlarmsActive.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 1.8.4.1
@@ -510,8 +509,8 @@ export namespace BooleanStateConfiguration {
     /**
      * This cluster supports all BooleanStateConfiguration features. It may support illegal feature combinations.
      *
-     * If you use this cluster you must manually specify which features are active and ensure the set of active
-     * features is legal per the Matter specification.
+     * If you use this cluster you must manually specify which features are active and ensure the set of active features
+     * is legal per the Matter specification.
      */
     export interface Complete extends Identity<typeof CompleteInstance> {}
 

package/src/clusters/bridged-device-basic-information.ts

@@ -56,9 +56,9 @@ export namespace BridgedDeviceBasicInformation {
          * This field shall indicate the duration, in milliseconds, that the device is requested to remain active, once
          * the device becomes active again.
          *
-         * The value of this field may be longer than the value supported by the bridged device and would, typically,
-         * be used by the client to request the server of the bridged device to stay active and responsive for this
-         * period to allow a sequence of message exchanges during that period.
+         * The value of this field may be longer than the value supported by the bridged device and would, typically, be
+         * used by the client to request the server of the bridged device to stay active and responsive for this period
+         * to allow a sequence of message exchanges during that period.
          *
          * The client may slightly overestimate the duration it wants the bridged device to be active for, in order to
          * account for network delays.
@@ -100,8 +100,8 @@ export namespace BridgedDeviceBasicInformation {
          * This field shall indicate the minimum duration, in milliseconds, that the bridged device will remain active
          * after receiving the initial request from the KeepActive processing steps.
          *
-         * If the bridged device is a Matter Intermittently Connected Device, PromisedActiveDuration shall be set to
-         * the PromisedActiveDuration value returned in the StayActiveResponse command.
+         * If the bridged device is a Matter Intermittently Connected Device, PromisedActiveDuration shall be set to the
+         * PromisedActiveDuration value returned in the StayActiveResponse command.
          *
          * If the bridged device is not a Matter Intermittently Connected Device, the implementation of this is
          * best-effort since it may interact with non-native protocol.
@@ -183,12 +183,12 @@ export namespace BridgedDeviceBasicInformation {
              *
              * In order to avoid unnecessary power consumption in the bridged device:
              *
-             *   • The server shall enter a "pending active" state for the associated device when the KeepActive
-             *     command is received. The server "pending active" state shall expire after the amount of time defined
-             *     by the TimeoutMs field, in milliseconds, if no subsequent KeepActive command is received. When a
-             *     KeepActive command is received, the "pending active" state is set, the StayActiveDuration is updated
-             *     to the greater of the new value and the previously stored value, and the TimeoutMs is updated to the
-             *     greater of the new value and the remaining time until the prior "pending active" state expires.
+             *   • The server shall enter a "pending active" state for the associated device when the KeepActive command
+             *     is received. The server "pending active" state shall expire after the amount of time defined by the
+             *     TimeoutMs field, in milliseconds, if no subsequent KeepActive command is received. When a KeepActive
+             *     command is received, the "pending active" state is set, the StayActiveDuration is updated to the
+             *     greater of the new value and the previously stored value, and the TimeoutMs is updated to the greater
+             *     of the new value and the remaining time until the prior "pending active" state expires.
              *
              *   • The server shall only keep the bridged device active once for a request. (The server shall only
              *     consider the operation performed if an associated ActiveChanged event was generated.)
@@ -309,9 +309,9 @@ export namespace BridgedDeviceBasicInformation {
              * (when the attribute is False). Determination of reachability might not be perfect (e.g. depending on
              * technology employed), so the Matter Node SHOULD be aware of the risk of false positives and negatives on
              * reachability determination. For example, a bridged device may be marked as unreachable while it could
-             * actually be reached, and vice-versa. Also, detection (and indication) that a bridged device is not
-             * longer reachable may be delayed due to the technique employed (e.g. detecting that a number of expected
-             * messages from the bridged device did not arrive). Also see event ReachableChanged below.
+             * actually be reached, and vice-versa. Also, detection (and indication) that a bridged device is not longer
+             * reachable may be delayed due to the technique employed (e.g. detecting that a number of expected messages
+             * from the bridged device did not arrive). Also see event ReachableChanged below.
              *
              * @see {@link MatterSpecification.v13.Core} § 9.13.5.1
              */
@@ -347,8 +347,8 @@ export namespace BridgedDeviceBasicInformation {
             shutDown: OptionalEvent(0x1, EventPriority.Critical, TlvNoArguments),
 
             /**
-             * The Leave event SHOULD be generated by the bridge when it detects that the associated device has left
-             * the non-Matter network.
+             * The Leave event SHOULD be generated by the bridge when it detects that the associated device has left the
+             * non-Matter network.
              *
              * NOTE
              *
@@ -399,8 +399,8 @@ export namespace BridgedDeviceBasicInformation {
      * functionality of a Bridged Device is represented using a set of Endpoints, this cluster shall only be exposed on
      * the Endpoint which is at the top of the hierarchy for the functionality of that Bridged Device.
      *
-     * This cluster shall NOT be used on an endpoint that is not in the Descriptor cluster PartsList of an endpoint
-     * with an Aggregator device type.
+     * This cluster shall NOT be used on an endpoint that is not in the Descriptor cluster PartsList of an endpoint with
+     * an Aggregator device type.
      *
      * This cluster has been derived from the Basic Information Cluster, and provides generic information about the
      * Bridged Device. Not all of the attributes in the Basic Information Cluster are relevant for a Bridged Device
@@ -449,8 +449,8 @@ export namespace BridgedDeviceBasicInformation {
     /**
      * This cluster supports all BridgedDeviceBasicInformation features. It may support illegal feature combinations.
      *
-     * If you use this cluster you must manually specify which features are active and ensure the set of active
-     * features is legal per the Matter specification.
+     * If you use this cluster you must manually specify which features are active and ensure the set of active features
+     * is legal per the Matter specification.
      */
     export interface Complete extends Identity<typeof CompleteInstance> {}
 

package/src/clusters/carbon-dioxide-concentration-measurement.ts

@@ -26,8 +26,8 @@ export namespace CarbonDioxideConcentrationMeasurement {
     /**
      * This alias specializes the semantics of {@link ConcentrationMeasurement.Base}.
      *
-     * Per the Matter specification you cannot use {@link CarbonDioxideConcentrationMeasurementCluster} without
-     * enabling certain feature combinations. You must use the {@link with} factory method to obtain a working cluster.
+     * Per the Matter specification you cannot use {@link CarbonDioxideConcentrationMeasurementCluster} without enabling
+     * certain feature combinations. You must use the {@link with} factory method to obtain a working cluster.
      */
     export interface Cluster extends Identity<typeof ClusterInstance> {}
 
@@ -37,8 +37,8 @@ export namespace CarbonDioxideConcentrationMeasurement {
      * This cluster supports all CarbonDioxideConcentrationMeasurement features. It may support illegal feature
      * combinations.
      *
-     * If you use this cluster you must manually specify which features are active and ensure the set of active
-     * features is legal per the Matter specification.
+     * If you use this cluster you must manually specify which features are active and ensure the set of active features
+     * is legal per the Matter specification.
      */
     export const CompleteInstance = MutableCluster({
         ...ConcentrationMeasurement.Complete,

package/src/clusters/carbon-monoxide-concentration-measurement.ts

@@ -37,8 +37,8 @@ export namespace CarbonMonoxideConcentrationMeasurement {
      * This cluster supports all CarbonMonoxideConcentrationMeasurement features. It may support illegal feature
      * combinations.
      *
-     * If you use this cluster you must manually specify which features are active and ensure the set of active
-     * features is legal per the Matter specification.
+     * If you use this cluster you must manually specify which features are active and ensure the set of active features
+     * is legal per the Matter specification.
      */
     export const CompleteInstance = MutableCluster({
         ...ConcentrationMeasurement.Complete,

package/src/clusters/channel.ts

@@ -372,9 +372,9 @@ export namespace Channel {
         endTime: TlvField(1, TlvEpochS),
 
         /**
-         * This field shall indicate the set of channels for which program guide entries should be fetched. By
-         * providing a list of channels in this field, the response will only include entries corresponding to the
-         * specified channels.
+         * This field shall indicate the set of channels for which program guide entries should be fetched. By providing
+         * a list of channels in this field, the response will only include entries corresponding to the specified
+         * channels.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 6.6.7.5.3
          */
@@ -628,8 +628,8 @@ export namespace Channel {
         posterArtUrl: TlvOptionalField(10, TlvString.bound({ maxLength: 8192 })),
 
         /**
-         * This field shall represent the DVB-I URL associated to the program. The syntax of this field shall follow
-         * the syntax as specified in RFC 1738 and shall use the https scheme.
+         * This field shall represent the DVB-I URL associated to the program. The syntax of this field shall follow the
+         * syntax as specified in RFC 1738 and shall use the https scheme.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 6.6.5.7.12
          */
@@ -668,8 +668,8 @@ export namespace Channel {
         seriesInfo: TlvOptionalField(15, TlvNullable(TlvSeriesInfo)),
 
         /**
-         * This field shall represent the category of a particular program. This field is optional but shall be
-         * provided if known.
+         * This field shall represent the category of a particular program. This field is optional but shall be provided
+         * if known.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 6.6.5.7.17
          */
@@ -705,8 +705,8 @@ export namespace Channel {
      */
     export const TlvProgramGuideResponse = TlvObject({
         /**
-         * This field shall indicate the necessary pagination attributes that define information for both the
-         * succeeding and preceding data pages.
+         * This field shall indicate the necessary pagination attributes that define information for both the succeeding
+         * and preceding data pages.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 6.6.7.6.1
          */
@@ -742,9 +742,9 @@ export namespace Channel {
         programIdentifier: TlvField(0, TlvString.bound({ maxLength: 255 })),
 
         /**
-         * This field shall indicate whether the whole series associated to the program should be recorded. For
-         * example, invoking record program on an episode with that flag set to true, the target should schedule record
-         * the whole series.
+         * This field shall indicate whether the whole series associated to the program should be recorded. For example,
+         * invoking record program on an episode with that flag set to true, the target should schedule record the whole
+         * series.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 6.6.7.7.2
          */
@@ -852,8 +852,8 @@ export namespace Channel {
      */
     export const TlvSkipChannelRequest = TlvObject({
         /**
-         * This field shall indicate the number of steps to increase (Count is positive) or decrease (Count is
-         * negative) the current channel.
+         * This field shall indicate the number of steps to increase (Count is positive) or decrease (Count is negative)
+         * the current channel.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 6.6.7.4.1
          */
@@ -1050,9 +1050,9 @@ export namespace Channel {
      *
      * This cluster server would be supported on Video Player devices or endpoints that allow Channel control such as a
      * Content App. This cluster provides a list of available channels and provides commands for absolute and relative
-     * channel changes. Some of these commands and/or their responses may be large (see Large Message Quality under
-     * Data Model section in [MatterCore]), but they do not have the Large quality indicator (L) because they can also
-     * be transferred over MRP (see Message Reliability Protocol in [MatterCore]) in pages that fit within the MRP MTU
+     * channel changes. Some of these commands and/or their responses may be large (see Large Message Quality under Data
+     * Model section in [MatterCore]), but they do not have the Large quality indicator (L) because they can also be
+     * transferred over MRP (see Message Reliability Protocol in [MatterCore]) in pages that fit within the MRP MTU
      * limit. However, an implementation may leverage a transport like TCP that allows large payloads, if available, to
      * minimize the number of messages required to transfer the corresponding payload.
      *
@@ -1112,8 +1112,8 @@ export namespace Channel {
     /**
      * This cluster supports all Channel features. It may support illegal feature combinations.
      *
-     * If you use this cluster you must manually specify which features are active and ensure the set of active
-     * features is legal per the Matter specification.
+     * If you use this cluster you must manually specify which features are active and ensure the set of active features
+     * is legal per the Matter specification.
      */
     export interface Complete extends Identity<typeof CompleteInstance> {}
 

package/src/clusters/color-control.ts

@@ -181,8 +181,8 @@ export namespace ColorControl {
         moveMode: TlvField(0, TlvEnum<MoveMode>()),
 
         /**
-         * This field shall indicate the rate of movement in steps per second. A step is a change in the device’s hue
-         * of one unit.
+         * This field shall indicate the rate of movement in steps per second. A step is a change in the device’s hue of
+         * one unit.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 3.2.8.5.2
          */
@@ -242,8 +242,8 @@ export namespace ColorControl {
          *
          * NOTE
          *
-         * Here the TransitionTime data field is of data type uint8, where uint16 is more common for TransitionTime
-         * data fields in other clusters / commands.
+         * Here the TransitionTime data field is of data type uint8, where uint16 is more common for TransitionTime data
+         * fields in other clusters / commands.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 3.2.8.6.3
          */
@@ -338,8 +338,8 @@ export namespace ColorControl {
          *
          * NOTE
          *
-         * Here the TransitionTime data field is of data type uint8, where uint16 is more common for TransitionTime
-         * data fields in other clusters / commands.
+         * Here the TransitionTime data field is of data type uint8, where uint16 is more common for TransitionTime data
+         * fields in other clusters / commands.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 3.2.8.9.3
          */
@@ -559,9 +559,8 @@ export namespace ColorControl {
         stepSize: TlvField(1, TlvUInt16),
 
         /**
-         * This field shall indicate, in units of 1/10ths of a second, the time that shall be taken to perform the
-         * step. A step is a change to the device’s color temperature of a magnitude corresponding to the StepSize
-         * field.
+         * This field shall indicate, in units of 1/10ths of a second, the time that shall be taken to perform the step.
+         * A step is a change to the device’s color temperature of a magnitude corresponding to the StepSize field.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 3.2.8.22.3
          */
@@ -660,8 +659,8 @@ export namespace ColorControl {
         moveMode: TlvField(0, TlvEnum<MoveMode>()),
 
         /**
-         * This field shall indicate the rate of movement in steps per second. A step is a change in the extended hue
-         * of a device by one unit.
+         * This field shall indicate the rate of movement in steps per second. A step is a change in the extended hue of
+         * a device by one unit.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 3.2.8.16.2
          */
@@ -1206,8 +1205,8 @@ export namespace ColorControl {
         attributes: {
             /**
              * Indicates a scaled inverse of the current value of the color temperature. The unit of
-             * ColorTemperatureMireds is the mired (micro reciprocal degree), a.k.a. mirek (micro reciprocal kelvin).
-             * It is updated as fast as practical during commands that change the color.
+             * ColorTemperatureMireds is the mired (micro reciprocal degree), a.k.a. mirek (micro reciprocal kelvin). It
+             * is updated as fast as practical during commands that change the color.
              *
              * Changes to this attribute shall only be marked as reportable in the following cases:
              *
@@ -1237,7 +1236,7 @@ export namespace ColorControl {
              *
              * @see {@link MatterSpecification.v13.Cluster} § 3.2.7.20
              */
-            colorTempPhysicalMinMireds: Attribute(0x400b, TlvUInt16.bound({ min: 1, max: 65279 }), { default: 1 }),
+            colorTempPhysicalMinMireds: Attribute(0x400b, TlvUInt16.bound({ min: 1, max: 65279 })),
 
             /**
              * Indicates the maximum mired value supported by the hardware. ColorTempPhysicalMaxMireds corresponds to
@@ -1247,14 +1246,14 @@ export namespace ColorControl {
              *
              * @see {@link MatterSpecification.v13.Cluster} § 3.2.7.21
              */
-            colorTempPhysicalMaxMireds: Attribute(0x400c, TlvUInt16.bound({ max: 65279 }), { default: 65279 }),
+            colorTempPhysicalMaxMireds: Attribute(0x400c, TlvUInt16.bound({ max: 65279 })),
 
             /**
-             * Indicates a lower bound on the value of the ColorTemperatureMireds attribute for the purposes of
-             * coupling the ColorTemperatureMireds attribute to the CurrentLevel attribute when the
-             * CoupleColorTempToLevel bit of the Options attribute of the Level Control cluster is equal to 1. When
-             * coupling the ColorTemperatureMireds attribute to the CurrentLevel attribute, this value shall correspond
-             * to a CurrentLevel value of 254 (100%).
+             * Indicates a lower bound on the value of the ColorTemperatureMireds attribute for the purposes of coupling
+             * the ColorTemperatureMireds attribute to the CurrentLevel attribute when the CoupleColorTempToLevel bit of
+             * the Options attribute of the Level Control cluster is equal to 1. When coupling the
+             * ColorTemperatureMireds attribute to the CurrentLevel attribute, this value shall correspond to a
+             * CurrentLevel value of 254 (100%).
              *
              * This attribute shall be set such that the following relationship exists: ColorTempPhysicalMinMireds <=
              * CoupleColorTempToLevelMinMireds <= ColorTemperatureMireds
@@ -1272,8 +1271,8 @@ export namespace ColorControl {
 
             /**
              * Indicates the desired startup color temperature value the light shall use when it is supplied with power
-             * and this value shall be reflected in the ColorTemperatureMireds attribute. In addition, the ColorMode
-             * and EnhancedColorMode attributes shall be set to 2 (ColorTemperatureMireds). The values of the
+             * and this value shall be reflected in the ColorTemperatureMireds attribute. In addition, the ColorMode and
+             * EnhancedColorMode attributes shall be set to 2 (ColorTemperatureMireds). The values of the
              * StartUpColorTemperatureMireds attribute are listed in the table below,
              *
              * @see {@link MatterSpecification.v13.Cluster} § 3.2.7.23
@@ -1418,8 +1417,8 @@ export namespace ColorControl {
             colorLoopStartEnhancedHue: Attribute(0x4005, TlvUInt16, { default: 8960 }),
 
             /**
-             * Indicates the value of the EnhancedCurrentHue attribute before the color loop was started. Once the
-             * color loop is complete, the EnhancedCurrentHue attribute shall be restored to this value.
+             * Indicates the value of the EnhancedCurrentHue attribute before the color loop was started. Once the color
+             * loop is complete, the EnhancedCurrentHue attribute shall be restored to this value.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 3.2.7.18
              */
@@ -1513,8 +1512,8 @@ export namespace ColorControl {
              *
              *   • When it changes to 0.
              *
-             * For commands with a transition time or changes to the transition time less than 1 second, changes to
-             * this attribute shall NOT be reported.
+             * For commands with a transition time or changes to the transition time less than 1 second, changes to this
+             * attribute shall NOT be reported.
              *
              * As this attribute is not being reported during a regular countdown, clients SHOULD NOT rely on the
              * reporting of this attribute in order to keep track of the remaining duration.
@@ -1541,8 +1540,8 @@ export namespace ColorControl {
             /**
              * Indicates which attributes are currently determining the color of the device.
              *
-             * The value of the ColorMode attribute cannot be written directly - it is set upon reception of any
-             * command in section Commands to the appropriate mode for that command.
+             * The value of the ColorMode attribute cannot be written directly - it is set upon reception of any command
+             * in section Commands to the appropriate mode for that command.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 3.2.7.10
              */
@@ -1605,8 +1604,8 @@ export namespace ColorControl {
             primary1Y: OptionalFixedAttribute(0x12, TlvUInt16.bound({ max: 65279 })),
 
             /**
-             * Indicates a representation of the maximum intensity of this primary as defined in the Dimming Light
-             * Curve in the Ballast Configuration cluster (see Ballast Configuration Cluster), normalized such that the
+             * Indicates a representation of the maximum intensity of this primary as defined in the Dimming Light Curve
+             * in the Ballast Configuration cluster (see Ballast Configuration Cluster), normalized such that the
              * primary with the highest maximum intensity contains the value 254.
              *
              * A value of null shall indicate that this primary is not available.
@@ -2039,8 +2038,8 @@ export namespace ColorControl {
     /**
      * This cluster supports all ColorControl features. It may support illegal feature combinations.
      *
-     * If you use this cluster you must manually specify which features are active and ensure the set of active
-     * features is legal per the Matter specification.
+     * If you use this cluster you must manually specify which features are active and ensure the set of active features
+     * is legal per the Matter specification.
      */
     export interface Complete extends Identity<typeof CompleteInstance> {}
 

package/src/clusters/commissioner-control.ts

@@ -79,14 +79,14 @@ export namespace CommissionerControl {
      * RequestCommissioningApproval command.
      *
      * When commissioning this node, the server shall check that the VendorID and ProductID fields provided in the
-     * RequestCommissioningApproval command match the VendorID and ProductID attributes of the Basic Information
-     * Cluster which have already been verified during the Device Attestation Procedure. If they do not match, the
-     * server shall NOT complete commissioning and SHOULD indicate an error to the user.
+     * RequestCommissioningApproval command match the VendorID and ProductID attributes of the Basic Information Cluster
+     * which have already been verified during the Device Attestation Procedure. If they do not match, the server shall
+     * NOT complete commissioning and SHOULD indicate an error to the user.
      *
      * NOTE
      *
-     * This is an alias onto the Open Commissioning Window command within the Administrator Commissioning Cluster.
-     * Refer to the Open Commissioning Window command for a description of the command behavior and parameters.
+     * This is an alias onto the Open Commissioning Window command within the Administrator Commissioning Cluster. Refer
+     * to the Open Commissioning Window command for a description of the command behavior and parameters.
      *
      * The parameters for ReverseOpenCommissioningWindow command are as follows:
      *
@@ -106,14 +106,14 @@ export namespace CommissionerControl {
      * RequestCommissioningApproval command.
      *
      * When commissioning this node, the server shall check that the VendorID and ProductID fields provided in the
-     * RequestCommissioningApproval command match the VendorID and ProductID attributes of the Basic Information
-     * Cluster which have already been verified during the Device Attestation Procedure. If they do not match, the
-     * server shall NOT complete commissioning and SHOULD indicate an error to the user.
+     * RequestCommissioningApproval command match the VendorID and ProductID attributes of the Basic Information Cluster
+     * which have already been verified during the Device Attestation Procedure. If they do not match, the server shall
+     * NOT complete commissioning and SHOULD indicate an error to the user.
      *
      * NOTE
      *
-     * This is an alias onto the Open Commissioning Window command within the Administrator Commissioning Cluster.
-     * Refer to the Open Commissioning Window command for a description of the command behavior and parameters.
+     * This is an alias onto the Open Commissioning Window command within the Administrator Commissioning Cluster. Refer
+     * to the Open Commissioning Window command for a description of the command behavior and parameters.
      *
      * The parameters for ReverseOpenCommissioningWindow command are as follows:
      *
@@ -176,8 +176,8 @@ export namespace CommissionerControl {
              *
              * The server may request approval from the user, but it is not required.
              *
-             * The server shall always return SUCCESS to a correctly formatted RequestCommissioningApproval command,
-             * and then generate a CommissioningRequestResult event associated with the command’s
+             * The server shall always return SUCCESS to a correctly formatted RequestCommissioningApproval command, and
+             * then generate a CommissioningRequestResult event associated with the command’s
              *
              * accessing fabric once the result is ready.
              *
@@ -202,9 +202,9 @@ export namespace CommissionerControl {
              * This command is sent by a client to request that the server begins commissioning a previously approved
              * request.
              *
-             * The server shall return FAILURE if the CommissionNode command is not sent from the same NodeID and on
-             * the same fabric as the RequestCommissioningApproval or if the provided RequestID to CommissionNode does
-             * not match the value provided to RequestCommissioningApproval.
+             * The server shall return FAILURE if the CommissionNode command is not sent from the same NodeID and on the
+             * same fabric as the RequestCommissioningApproval or if the provided RequestID to CommissionNode does not
+             * match the value provided to RequestCommissioningApproval.
              *
              * If the command is not executed via a CASE session, the command shall fail with a status code of
              *
@@ -267,7 +267,7 @@ export namespace CommissionerControl {
      *
      * The generalized flow supported by the Commissioner Control Cluster can be seen in the following diagram.
      *
-     * Figure 101. Commissioner Control Cluster - General Flow
+     * Figure 103. Commissioner Control Cluster - General Flow
      *
      * @see {@link MatterSpecification.v13.Core} § 11.26
      */

package/src/clusters/concentration-measurement.ts

@@ -238,8 +238,8 @@ export namespace ConcentrationMeasurement {
         attributes: {
             /**
              * Indicates the average value of MeasuredValue that has been measured during the
-             * AverageMeasuredValueWindow. If this attribute is provided, the AverageMeasuredValueWindow attribute
-             * shall also be provided.
+             * AverageMeasuredValueWindow. If this attribute is provided, the AverageMeasuredValueWindow attribute shall
+             * also be provided.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 2.10.6.6
              */
@@ -407,8 +407,8 @@ export namespace ConcentrationMeasurement {
     /**
      * This cluster supports all ConcentrationMeasurement features. It may support illegal feature combinations.
      *
-     * If you use this cluster you must manually specify which features are active and ensure the set of active
-     * features is legal per the Matter specification.
+     * If you use this cluster you must manually specify which features are active and ensure the set of active features
+     * is legal per the Matter specification.
      */
     export interface Complete extends Identity<typeof CompleteInstance> {}
 

package/src/clusters/content-app-observer.ts

@@ -145,15 +145,15 @@ export namespace ContentAppObserver {
      *   2. The Content App Platform is able to easily identify commands that are allowed to be sent by the Content App
      *      to a client node because those commands use the Content App Observer cluster.
      *
-     *   3. The Content App is able to easily determine that a node supports the Content App Observer cluster because
-     *      it has received a binding which specifies the Content App Observer cluster.
+     *   3. The Content App is able to easily determine that a node supports the Content App Observer cluster because it
+     *      has received a binding which specifies the Content App Observer cluster.
      *
-     *   4. The Casting Video Client is able to support a single cluster for receiving commands from any Content App
-     *      and does not need to explicitly list every Content App it understands.
+     *   4. The Casting Video Client is able to support a single cluster for receiving commands from any Content App and
+     *      does not need to explicitly list every Content App it understands.
      *
      * A Content App Observer SHOULD ignore the Data and EncodingHint field values in commands from a Content App it
-     * does not recognize. A Content App SHOULD ignore the Data field values in responses when the EncodingHint value
-     * is blank or not recognized.
+     * does not recognize. A Content App SHOULD ignore the Data field values in responses when the EncodingHint value is
+     * blank or not recognized.
      *
      * @see {@link MatterSpecification.v13.Cluster} § 6.12
      */