@matter/types 0.13.0-alpha.0-20250318-c1aa38b08 → 0.13.0-alpha.0-20250323-770919c6a

package/src/clusters/general-commissioning.ts

@@ -42,16 +42,16 @@ export namespace GeneralCommissioning {
      */
     export const TlvSetTcAcknowledgementsRequest = TlvObject({
         /**
-         * This field shall contain the version of the Enhanced Setup Flow Terms & Conditions that were presented to
-         * the user.
+         * This field shall contain the version of the Enhanced Setup Flow Terms & Conditions that were presented to the
+         * user.
          *
          * @see {@link MatterSpecification.v13.Core} § 11.10.7.8.1
          */
         tcVersion: TlvField(0, TlvUInt16),
 
         /**
-         * This field shall contain the user responses to the Enhanced Setup Flow Terms & Conditions as a map where
-         * each bit set in the bitmap corresponds to an accepted term in the file located at EnhancedSetupFlowTCUrl.
+         * This field shall contain the user responses to the Enhanced Setup Flow Terms & Conditions as a map where each
+         * bit set in the bitmap corresponds to an accepted term in the file located at EnhancedSetupFlowTCUrl.
          *
          * ### Effect on Receipt
          *
@@ -112,8 +112,8 @@ export namespace GeneralCommissioning {
         NoFailSafe = 3,
 
         /**
-         * Attempting to arm fail- safe or execute CommissioningComplete from a fabric different than the one
-         * associated with the current fail- safe context.
+         * Attempting to arm fail- safe or execute CommissioningComplete from a fabric different than the one associated
+         * with the current fail- safe context.
          */
         BusyWithOtherAdmin = 4,
 
@@ -172,8 +172,8 @@ export namespace GeneralCommissioning {
         failSafeExpiryLengthSeconds: TlvField(0, TlvUInt16),
 
         /**
-         * This field shall contain a conservative value in seconds denoting the maximum total duration for which a
-         * fail safe timer can be re-armed. See Section 11.10.7.2.1, “Fail Safe Context”.
+         * This field shall contain a conservative value in seconds denoting the maximum total duration for which a fail
+         * safe timer can be re-armed. See Section 11.10.7.2.1, “Fail Safe Context”.
          *
          * The value of this field shall be greater than or equal to the FailSafeExpiryLengthSeconds. Absent additional
          * guidelines, it is recommended that the value of this field be aligned with the initial Announcement Duration
@@ -364,11 +364,11 @@ export namespace GeneralCommissioning {
 
             /**
              * Indicates the user’s response to the presented terms. Each bit position corresponds to a user response
-             * for the associated index of matching text, such that bit 0 (bit value 1) is for text index 0. Bit 15
-             * (bit value 0x8000) is for text index 15. A bit value of 1 indicates acceptance and a value of 0
-             * indicates non-acceptance. For example, if there are two texts that were presented where the first (bit
-             * 0, value 1) was declined and the second accepted (bit 1, value 2), we would expect the resulting value
-             * of the map to be 2.
+             * for the associated index of matching text, such that bit 0 (bit value 1) is for text index 0. Bit 15 (bit
+             * value 0x8000) is for text index 15. A bit value of 1 indicates acceptance and a value of 0 indicates
+             * non-acceptance. For example, if there are two texts that were presented where the first (bit 0, value 1)
+             * was declined and the second accepted (bit 1, value 2), we would expect the resulting value of the map to
+             * be 2.
              *
              * Whenever a user provides responses to newly presented terms and conditions, this attribute shall be
              * updated with the latest responses. This may happen in response to updated terms that were presented to
@@ -386,11 +386,11 @@ export namespace GeneralCommissioning {
              * Indicates whether SetTCAcknowledgements is currently required to be called with the inclusion of
              * mandatory terms accepted.
              *
-             * This attribute may be present and False in the case where no terms and conditions are currently
-             * mandatory to accept for CommissioningComplete to succeed.
+             * This attribute may be present and False in the case where no terms and conditions are currently mandatory
+             * to accept for CommissioningComplete to succeed.
              *
-             * This attribute may appear, or become True after commissioning (e.g. due to a firmware update) to
-             * indicate that new Terms & Conditions are available that the user must accept.
+             * This attribute may appear, or become True after commissioning (e.g. due to a firmware update) to indicate
+             * that new Terms & Conditions are available that the user must accept.
              *
              * Upon Factory Data Reset, this attribute shall be set to a value of True.
              *
@@ -460,9 +460,9 @@ export namespace GeneralCommissioning {
         attributes: {
             /**
              * This attribute allows for the storage of a client-provided small payload which Administrators and
-             * Commissioners may write and then subsequently read, to keep track of their own progress. This may be
-             * used by the Commissioner to avoid repeating already-executed actions upon re-establishing a
-             * commissioning link after an error.
+             * Commissioners may write and then subsequently read, to keep track of their own progress. This may be used
+             * by the Commissioner to avoid repeating already-executed actions upon re-establishing a commissioning link
+             * after an error.
              *
              * On start/restart of the server, such as when a device is power-cycled, this attribute shall be reset to
              * zero.
@@ -535,37 +535,37 @@ export namespace GeneralCommissioning {
              *
              * If the fail-safe timer is not currently armed, the commissioning window is open, and the command was
              * received over a CASE session, the command shall leave the current fail-safe state unchanged and
-             * immediately respond with an ArmFailSafeResponse containing an ErrorCode value of BusyWithOtherAdmin.
-             * This is done to allow commissioners, which use PASE connections, the opportunity to use the failsafe
-             * during the relatively short commissioning window.
+             * immediately respond with an ArmFailSafeResponse containing an ErrorCode value of BusyWithOtherAdmin. This
+             * is done to allow commissioners, which use PASE connections, the opportunity to use the failsafe during
+             * the relatively short commissioning window.
              *
              * Otherwise, the command shall arm or re-arm the "fail-safe timer" with an expiry time set for a duration
              * of ExpiryLengthSeconds, or disarm it, depending on the situation:
              *
              *   • If ExpiryLengthSeconds is 0 and the fail-safe timer was already armed and the accessing fabric
-             *     matches the Fabric currently associated with the fail-safe context, then the fail-safe timer shall
-             *     be immediately expired (see further below for side-effects of expiration).
+             *     matches the Fabric currently associated with the fail-safe context, then the fail-safe timer shall be
+             *     immediately expired (see further below for side-effects of expiration).
              *
-             *   • If ExpiryLengthSeconds is 0 and the fail-safe timer was not armed, then this command invocation
-             *     shall lead to a success response with no side-effects against the fail-safe context.
+             *   • If ExpiryLengthSeconds is 0 and the fail-safe timer was not armed, then this command invocation shall
+             *     lead to a success response with no side-effects against the fail-safe context.
              *
              *   • If ExpiryLengthSeconds is non-zero and the fail-safe timer was not currently armed, then the
              *     fail-safe timer shall be armed for that duration.
              *
              *   • If ExpiryLengthSeconds is non-zero and the fail-safe timer was currently armed, and the accessing
-             *     Fabric matches the fail-safe context’s associated Fabric, then the fail-safe timer shall be re-
-             *     armed to expire in ExpiryLengthSeconds.
+             *     Fabric matches the fail-safe context’s associated Fabric, then the fail-safe timer shall be re- armed
+             *     to expire in ExpiryLengthSeconds.
              *
-             *   • Otherwise, the command shall leave the current fail-safe state unchanged and immediately respond
-             *     with ArmFailSafeResponse containing an ErrorCode value of BusyWithOtherAdmin, indicating a likely
-             *     conflict between commissioners.
+             *   • Otherwise, the command shall leave the current fail-safe state unchanged and immediately respond with
+             *     ArmFailSafeResponse containing an ErrorCode value of BusyWithOtherAdmin, indicating a likely conflict
+             *     between commissioners.
              *
              * The value of the Breadcrumb field shall be written to the Breadcrumb on successful execution of the
              * command.
              *
              * If the receiver restarts unexpectedly (e.g., power interruption, software crash, or other reset) the
-             * receiver shall behave as if the fail-safe timer expired and perform the sequence of clean-up steps
-             * listed below.
+             * receiver shall behave as if the fail-safe timer expired and perform the sequence of clean-up steps listed
+             * below.
              *
              * On successful execution of the command, the ErrorCode field of the ArmFailSafeResponse shall be set to
              * OK.
@@ -628,8 +628,8 @@ export namespace GeneralCommissioning {
              *   4. Reset the configuration of all Network Commissioning Networks attribute to their state prior to the
              *       Fail-Safe being armed.
              *
-             *   5. If an UpdateNOC command had been successfully invoked, revert the state of operational key pair,
-             *       NOC and ICAC for that Fabric to the state prior to the Fail-Safe timer being armed, for the Fabric
+             *   5. If an UpdateNOC command had been successfully invoked, revert the state of operational key pair, NOC
+             *       and ICAC for that Fabric to the state prior to the Fail-Safe timer being armed, for the Fabric
              *       Index that was the subject of the UpdateNOC command.
              *
              *   6. If an AddNOC command had been successfully invoked, achieve the equivalent effect of invoking the
@@ -639,13 +639,13 @@ export namespace GeneralCommissioning {
              *       device state. This shall only apply to Fabrics added during the fail-safe period as the result of
              *       the AddNOC command.
              *
-             *   7. If the CSRRequest command had been successfully invoked, but no AddNOC or UpdateNOC command had
-             *       been successfully invoked, then the new operational key pair temporarily generated for the
-             *       purposes of NOC addition or update (see Node Operational CSR Procedure) shall be removed as it is
-             *       no longer needed.
+             *   7. If the CSRRequest command had been successfully invoked, but no AddNOC or UpdateNOC command had been
+             *       successfully invoked, then the new operational key pair temporarily generated for the purposes of
+             *       NOC addition or update (see Node Operational CSR Procedure) shall be removed as it is no longer
+             *       needed.
              *
-             *   8. Remove any RCACs added by the AddTrustedRootCertificate command that are not currently referenced
-             *       by any entry in the Fabrics attribute.
+             *   8. Remove any RCACs added by the AddTrustedRootCertificate command that are not currently referenced by
+             *       any entry in the Fabrics attribute.
              *
              *   9. Reset the Breadcrumb attribute to zero.
              *
@@ -667,22 +667,22 @@ export namespace GeneralCommissioning {
              * provided in the NewRegulatoryConfig field.
              *
              * Success or failure of this command shall be communicated by the SetRegulatoryConfigResponse command,
-             * unless some data model validations caused a failure status code to be issued during the processing of
-             * the command.
+             * unless some data model validations caused a failure status code to be issued during the processing of the
+             * command.
              *
              * The CountryCode field shall conforms to ISO 3166-1 alpha-2 and shall be used to set the Location
              * attribute reflected by the Basic Information Cluster.
              *
-             * If the server limits some of the values (e.g. locked to a particular country, with no regulatory data
-             * for others), then setting regulatory information outside a valid country or location shall still set the
+             * If the server limits some of the values (e.g. locked to a particular country, with no regulatory data for
+             * others), then setting regulatory information outside a valid country or location shall still set the
              * Location attribute reflected by the Basic Information Cluster configuration, but the
              * SetRegulatoryConfigResponse replied shall have the ErrorCode field set to ValueOutsideRange error.
              *
              * If the LocationCapability attribute is not Indoor/Outdoor and the NewRegulatoryConfig value
              *
              * received does not match either the Indoor or Outdoor fixed value in LocationCapability, then the
-             * SetRegulatoryConfigResponse replied shall have the ErrorCode field set to ValueOutsideRange error and
-             * the RegulatoryConfig attribute and associated internal radio configuration shall remain unchanged.
+             * SetRegulatoryConfigResponse replied shall have the ErrorCode field set to ValueOutsideRange error and the
+             * RegulatoryConfig attribute and associated internal radio configuration shall remain unchanged.
              *
              * If the LocationCapability attribute is set to Indoor/Outdoor, then the RegulatoryConfig attribute shall
              * be set to match the NewRegulatoryConfig field.
@@ -690,9 +690,9 @@ export namespace GeneralCommissioning {
              * On successful execution of the command, the ErrorCode field of the SetRegulatoryConfigResponse shall be
              * set to OK.
              *
-             * The Breadcrumb field shall be used to atomically set the Breadcrumb attribute on success of this
-             * command, when SetRegulatoryConfigResponse has the ErrorCode field set to OK. If the command fails, the
-             * Breadcrumb attribute shall be left unchanged.
+             * The Breadcrumb field shall be used to atomically set the Breadcrumb attribute on success of this command,
+             * when SetRegulatoryConfigResponse has the ErrorCode field set to OK. If the command fails, the Breadcrumb
+             * attribute shall be left unchanged.
              *
              * @see {@link MatterSpecification.v13.Core} § 11.10.7.4
              */
@@ -708,16 +708,15 @@ export namespace GeneralCommissioning {
              * This command has no data.
              *
              * Success or failure of this command shall be communicated by the CommissioningCompleteResponse command,
-             * unless some data model validations caused a failure status code to be issued during the processing of
-             * the command.
+             * unless some data model validations caused a failure status code to be issued during the processing of the
+             * command.
              *
              * This command signals the Server that the Commissioner or Administrator has successfully completed all
              * steps needed during the Fail-Safe period, such as commissioning (see Section 5.5, “Commissioning Flows”)
              * or other Administrator operations requiring usage of the Fail Safe timer. It ensures that the Server is
-             * configured in a state such that it still has all necessary elements to be fully operable within a
-             * Fabric, such as ACL entries (see Section 9.10, “Access Control Cluster”) and operational credentials
-             * (see Section 6.4, “Node Operational Credentials Specification”), and that the Node is reachable using
-             * CASE
+             * configured in a state such that it still has all necessary elements to be fully operable within a Fabric,
+             * such as ACL entries (see Section 9.10, “Access Control Cluster”) and operational credentials (see Section
+             * 6.4, “Node Operational Credentials Specification”), and that the Node is reachable using CASE
              *
              * (CASE)”) over an operational network.
              *
@@ -732,9 +731,9 @@ export namespace GeneralCommissioning {
              * This command is fabric-scoped, so cannot be issued over a session that does not have an associated
              * fabric, i.e. over PASE session prior to an AddNOC command. In addition, this command is only permitted
              * over CASE and must be issued by a node associated with the ongoing Fail-Safe context. An ErrorCode of
-             * InvalidAuthentication shall be responded to the invoker if the CommissioningComplete command was
-             * received outside a CASE session (e.g., over Group messaging, or PASE session after AddNOC), or if the
-             * accessing fabric is not the one associated with the ongoing Fail-Safe context.
+             * InvalidAuthentication shall be responded to the invoker if the CommissioningComplete command was received
+             * outside a CASE session (e.g., over Group messaging, or PASE session after AddNOC), or if the accessing
+             * fabric is not the one associated with the ongoing Fail-Safe context.
              *
              * This command shall only result in success with an ErrorCode value of OK in the
              * CommissioningCompleteResponse if received over a CASE session and the accessing fabric index matches the
@@ -747,8 +746,8 @@ export namespace GeneralCommissioning {
              *     originate from the Fabric which was joined through the execution of that command, which updated the
              *     Fail-Safe context’s Fabric Index.
              *
-             * On successful execution of the CommissioningComplete command, where the CommissioningCompleteResponse
-             * has an ErrorCode of OK, the following actions shall be undertaken on the Server:
+             * On successful execution of the CommissioningComplete command, where the CommissioningCompleteResponse has
+             * an ErrorCode of OK, the following actions shall be undertaken on the Server:
              *
              *   1. The Fail-Safe timer associated with the current Fail-Safe context shall be disarmed.
              *
@@ -852,8 +851,8 @@ export namespace GeneralCommissioning {
     /**
      * This cluster supports all GeneralCommissioning features. It may support illegal feature combinations.
      *
-     * If you use this cluster you must manually specify which features are active and ensure the set of active
-     * features is legal per the Matter specification.
+     * If you use this cluster you must manually specify which features are active and ensure the set of active features
+     * is legal per the Matter specification.
      */
     export interface Complete extends Identity<typeof CompleteInstance> {}
 

package/src/clusters/general-diagnostics.ts

@@ -174,8 +174,8 @@ export namespace GeneralDiagnostics {
         name: TlvField(0, TlvString.bound({ maxLength: 32 })),
 
         /**
-         * This field shall indicate if the Node is currently advertising itself operationally on this network
-         * interface and is capable of successfully receiving incoming traffic from other Nodes.
+         * This field shall indicate if the Node is currently advertising itself operationally on this network interface
+         * and is capable of successfully receiving incoming traffic from other Nodes.
          *
          * @see {@link MatterSpecification.v13.Core} § 11.12.5.6.2
          */
@@ -202,9 +202,8 @@ export namespace GeneralDiagnostics {
         /**
          * This field shall contain the current link-layer address for a 802.3 or IEEE 802.11-2020 network
          *
-         * interface and contain the current extended MAC address for a 802.15.4 interface. The byte order of the
-         * octstr shall be in wire byte order. For addresses values less than 64 bits, the first two bytes shall be
-         * zero.
+         * interface and contain the current extended MAC address for a 802.15.4 interface. The byte order of the octstr
+         * shall be in wire byte order. For addresses values less than 64 bits, the first two bytes shall be zero.
          *
          * @see {@link MatterSpecification.v13.Core} § 11.12.5.6.5
          */
@@ -415,10 +414,9 @@ export namespace GeneralDiagnostics {
     export const TlvTestEventTriggerRequest = TlvObject({
         /**
          * The EnableKey is a 128 bit value provided by the client in this command, which needs to match a value chosen
-         * by the manufacturer and configured on the server using manufacturer-specific means, such as
-         * pre-provisioning. The value of all zeroes is reserved to indicate that no EnableKey is set. Therefore, if
-         * the EnableKey field is received with all zeroes, this command shall FAIL with a response status of
-         * CONSTRAINT_ERROR.
+         * by the manufacturer and configured on the server using manufacturer-specific means, such as pre-provisioning.
+         * The value of all zeroes is reserved to indicate that no EnableKey is set. Therefore, if the EnableKey field
+         * is received with all zeroes, this command shall FAIL with a response status of CONSTRAINT_ERROR.
          *
          * The EnableKey SHOULD be unique per exact set of devices going to a certification test.
          *
@@ -435,9 +433,9 @@ export namespace GeneralDiagnostics {
         /**
          * This field shall indicate the test or test mode which the client wants to trigger.
          *
-         * The expected side-effects of EventTrigger values are out of scope of this specification and will be
-         * described within appropriate certification test literature provided to manufacturers by the Connectivity
-         * Standards Alliance, in conjunction with certification test cases documentation.
+         * The expected side-effects of EventTrigger values are out of scope of this specification and will be described
+         * within appropriate certification test literature provided to manufacturers by the Connectivity Standards
+         * Alliance, in conjunction with certification test cases documentation.
          *
          * Values of EventTrigger in the range 0xFFFF_FFFF_0000_0000 through 0xFFFF_FFFF_FFFF_FFFF are reserved for
          * testing use by manufacturers and will not appear in CSA certification test literature.
@@ -491,9 +489,9 @@ export namespace GeneralDiagnostics {
         systemTimeMs: TlvField(0, TlvSysTimeMS),
 
         /**
-         * This shall indicate the current time in POSIX Time in milliseconds, with the value taken from the same
-         * source that could populate the Timestamp field of events. This value shall only be null when any the
-         * following are true:
+         * This shall indicate the current time in POSIX Time in milliseconds, with the value taken from the same source
+         * that could populate the Timestamp field of events. This value shall only be null when any the following are
+         * true:
          *
          *   • The node doesn’t support the Time Synchronization cluster.
          *
@@ -631,8 +629,8 @@ export namespace GeneralDiagnostics {
              * This command provides a means for certification tests or manufacturer’s internal tests to validate
              * particular command handling and encoding constraints by generating a response of a given size.
              *
-             * This command shall use the same EnableKey behavior as the TestEventTrigger command, whereby processing
-             * of the command is only enabled when the TestEventTriggersEnabled field is true, which shall NOT be true
+             * This command shall use the same EnableKey behavior as the TestEventTrigger command, whereby processing of
+             * the command is only enabled when the TestEventTriggersEnabled field is true, which shall NOT be true
              * outside of certification testing or manufacturer’s internal tests.
              *
              * The fields for the PayloadTestRequest command are as follows:
@@ -664,8 +662,8 @@ export namespace GeneralDiagnostics {
              * This feature indicates support for extended Data Model testing commands, which are required in some
              * situations.
              *
-             * This feature shall be supported if the MaxPathsPerInvoke attribute of the Basic Information Cluster has
-             * a value > 1.
+             * This feature shall be supported if the MaxPathsPerInvoke attribute of the Basic Information Cluster has a
+             * value > 1.
              *
              * @see {@link MatterSpecification.v13.Core} § 11.12.4.1
              */
@@ -692,11 +690,11 @@ export namespace GeneralDiagnostics {
             rebootCount: Attribute(0x1, TlvUInt16, { persistent: true }),
 
             /**
-             * The UpTime attribute shall indicate a best-effort assessment of the length of time, in seconds, since
-             * the Node’s last reboot. This attribute SHOULD be incremented to account for the periods of time that a
-             * Node is in a low-power or sleep state. This attribute shall only be reset upon a device reboot. This
-             * attribute shall be based on the same System Time source as those used to fulfill any usage of the
-             * system-us and system-ms data types within the server.
+             * The UpTime attribute shall indicate a best-effort assessment of the length of time, in seconds, since the
+             * Node’s last reboot. This attribute SHOULD be incremented to account for the periods of time that a Node
+             * is in a low-power or sleep state. This attribute shall only be reset upon a device reboot. This attribute
+             * shall be based on the same System Time source as those used to fulfill any usage of the system-us and
+             * system-ms data types within the server.
              *
              * @see {@link MatterSpecification.v13.Core} § 11.12.6.3
              */
@@ -739,13 +737,13 @@ export namespace GeneralDiagnostics {
             ),
 
             /**
-             * The ActiveRadioFaults attribute shall indicate the set of faults currently detected by the Node. When
-             * the Node detects a fault has been raised, the appropriate RadioFaultEnum value shall be added to this
-             * list. This list shall NOT contain more than one instance of a specific RadioFaultEnum value. When the
-             * Node detects that all conditions contributing to a fault has been cleared, the corresponding
-             * RadioFaultEnum value shall be removed from this list. An empty list shall indicate there are currently
-             * no active faults. The order of this list SHOULD have no significance. Clients interested in monitoring
-             * changes in active faults may subscribe to this attribute, or they may subscribe to RadioFaultChange.
+             * The ActiveRadioFaults attribute shall indicate the set of faults currently detected by the Node. When the
+             * Node detects a fault has been raised, the appropriate RadioFaultEnum value shall be added to this list.
+             * This list shall NOT contain more than one instance of a specific RadioFaultEnum value. When the Node
+             * detects that all conditions contributing to a fault has been cleared, the corresponding RadioFaultEnum
+             * value shall be removed from this list. An empty list shall indicate there are currently no active faults.
+             * The order of this list SHOULD have no significance. Clients interested in monitoring changes in active
+             * faults may subscribe to this attribute, or they may subscribe to RadioFaultChange.
              *
              * @see {@link MatterSpecification.v13.Core} § 11.12.6.7
              */
@@ -777,8 +775,8 @@ export namespace GeneralDiagnostics {
              * configured. When this attribute is true, the Node has been configured with one or more test event
              * triggers by virtue of the internally programmed EnableKey value (see TestEventTrigger) being set to a
              * non-zero value. This attribute can be used by Administrators to detect if a device was inadvertently
-             * commissioned with test event trigger mode enabled, and take appropriate action (e.g. warn the user
-             * and/or offer to remove all fabrics on the Node).
+             * commissioned with test event trigger mode enabled, and take appropriate action (e.g. warn the user and/or
+             * offer to remove all fabrics on the Node).
              *
              * @see {@link MatterSpecification.v13.Core} § 11.12.6.9
              */
@@ -819,8 +817,8 @@ export namespace GeneralDiagnostics {
 
         events: {
             /**
-             * The HardwareFaultChange Event shall indicate a change in the set of hardware faults currently detected
-             * by the Node.
+             * The HardwareFaultChange Event shall indicate a change in the set of hardware faults currently detected by
+             * the Node.
              *
              * @see {@link MatterSpecification.v13.Core} § 11.12.8.1
              */
@@ -902,8 +900,8 @@ export namespace GeneralDiagnostics {
     /**
      * This cluster supports all GeneralDiagnostics features. It may support illegal feature combinations.
      *
-     * If you use this cluster you must manually specify which features are active and ensure the set of active
-     * features is legal per the Matter specification.
+     * If you use this cluster you must manually specify which features are active and ensure the set of active features
+     * is legal per the Matter specification.
      */
     export interface Complete extends Identity<typeof CompleteInstance> {}
 

package/src/clusters/group-key-management.ts

@@ -381,9 +381,8 @@ export namespace GroupKeyManagement {
             maxGroupsPerFabric: FixedAttribute(0x2, TlvUInt16, { default: 0 }),
 
             /**
-             * Indicates the maximum number of group key sets this node supports per fabric. The value of this
-             * attribute shall be set according to the minimum number of group key sets to support as specified in
-             * Group Limits.
+             * Indicates the maximum number of group key sets this node supports per fabric. The value of this attribute
+             * shall be set according to the minimum number of group key sets to support as specified in Group Limits.
              *
              * @see {@link MatterSpecification.v13.Core} § 11.2.6.4
              */
@@ -407,14 +406,14 @@ export namespace GroupKeyManagement {
              *
              *   • If the EpochStartTime0 is set to 0, then this command shall fail with an INVALID_COMMAND status code
              *     responded to the client. Note that internally, a GroupKeySetStruct’s EpochStartTime0 may be set to
-             *     zero, due to the behavior of the AddNOC command which synthesizes a GroupKeySetStruct (see
-             *     IPKValue). However, the value 0 is illegal in the GroupKeySet field sent by a client.
+             *     zero, due to the behavior of the AddNOC command which synthesizes a GroupKeySetStruct (see IPKValue).
+             *     However, the value 0 is illegal in the GroupKeySet field sent by a client.
              *
              *   • If the EpochKey1 field is not null, then the EpochKey0 field shall NOT be null. Otherwise this
              *     command shall fail with an INVALID_COMMAND status code responded to the client.
              *
-             *   • If the EpochKey1 field is not null, and the field’s length is not exactly 16 bytes, then this
-             *     command shall fail with a CONSTRAINT_ERROR status code responded to the client.
+             *   • If the EpochKey1 field is not null, and the field’s length is not exactly 16 bytes, then this command
+             *     shall fail with a CONSTRAINT_ERROR status code responded to the client.
              *
              *   • If the EpochKey1 field is not null, its associated EpochStartTime1 field shall NOT be null and shall
              *     contain a later epoch start time than the epoch start time found in the EpochStartTime0 field.
@@ -426,8 +425,8 @@ export namespace GroupKeyManagement {
              *   • If the EpochKey2 field is not null, then the EpochKey1 and EpochKey0 fields shall NOT be null.
              *     Otherwise this command shall fail with an INVALID_COMMAND status code responded to the client.
              *
-             *   • If the EpochKey2 field is not null, and the field’s length is not exactly 16 bytes, then this
-             *     command shall fail with a CONSTRAINT_ERROR status code responded to the client.
+             *   • If the EpochKey2 field is not null, and the field’s length is not exactly 16 bytes, then this command
+             *     shall fail with a CONSTRAINT_ERROR status code responded to the client.
              *
              *   • If the EpochKey2 field is not null, its associated EpochStartTime2 field shall NOT be null and shall
              *     contain a later epoch start time than the epoch start time found in the EpochStartTime1 field.
@@ -439,8 +438,8 @@ export namespace GroupKeyManagement {
              * If there exists a Group Key Set associated with the accessing fabric which has the same GroupKeySetID as
              * that provided in the GroupKeySet field, then the contents of that group key set shall be
              *
-             * replaced. A replacement shall be done by executing the equivalent of entirely removing the previous
-             * Group Key Set with the given GroupKeySetID, followed by an addition of a Group Key Set with the provided
+             * replaced. A replacement shall be done by executing the equivalent of entirely removing the previous Group
+             * Key Set with the given GroupKeySetID, followed by an addition of a Group Key Set with the provided
              * configuration. Otherwise, if the GroupKeySetID did not match an existing entry, a new Group Key Set
              * associated with the accessing fabric shall be created with the provided data. The Group Key Set shall be
              * written to non-volatile storage.

package/src/clusters/groups.ts

@@ -378,8 +378,8 @@ export namespace Groups {
             ),
 
             /**
-             * The RemoveAllGroups command allows a client to direct the server to remove all group associations for
-             * the server endpoint.
+             * The RemoveAllGroups command allows a client to direct the server to remove all group associations for the
+             * server endpoint.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 1.3.7.5
              */
@@ -418,16 +418,15 @@ export namespace Groups {
     export const ClusterInstance = MutableCluster({ ...Base, supportedFeatures: { groupNames: true } });
 
     /**
-     * The Groups cluster manages, per endpoint, the content of the node-wide Group Table that is part of the
-     * underlying interaction layer.
+     * The Groups cluster manages, per endpoint, the content of the node-wide Group Table that is part of the underlying
+     * interaction layer.
      *
      * In a network supporting fabrics, group IDs referenced by attributes or other elements of this cluster are scoped
      * to the accessing fabric.
      *
-     * The Groups cluster is scoped to the endpoint. Groups cluster commands support discovering the endpoint
-     * membership in a group, adding the endpoint to a group, removing the endpoint from a group, removing endpoint
-     * membership from all groups. All commands defined in this cluster shall only affect groups scoped to the
-     * accessing fabric.
+     * The Groups cluster is scoped to the endpoint. Groups cluster commands support discovering the endpoint membership
+     * in a group, adding the endpoint to a group, removing the endpoint from a group, removing endpoint membership from
+     * all groups. All commands defined in this cluster shall only affect groups scoped to the accessing fabric.
      *
      * When group names are supported, the server stores a name string, which is set by the client for each assigned
      * group and indicated in response to a client request.

package/src/clusters/hepa-filter-monitoring.ts

@@ -32,8 +32,8 @@ export namespace HepaFilterMonitoring {
     /**
      * This cluster supports all HepaFilterMonitoring features. It may support illegal feature combinations.
      *
-     * If you use this cluster you must manually specify which features are active and ensure the set of active
-     * features is legal per the Matter specification.
+     * If you use this cluster you must manually specify which features are active and ensure the set of active features
+     * is legal per the Matter specification.
      */
     export const CompleteInstance = MutableCluster({
         ...ResourceMonitoring.Complete,