@matter/types 0.13.0-alpha.0-20250318-c1aa38b08 → 0.13.0-alpha.0-20250323-770919c6a

package/dist/esm/clusters/door-lock.d.ts

@@ -7,7 +7,7 @@
 import { MutableCluster } from "../cluster/mutation/MutableCluster.js";
 import { Attribute, OptionalWritableAttribute, Event, FixedAttribute, Command, WritableAttribute, OptionalCommand, OptionalAttribute } from "../cluster/Cluster.js";
 import { TypeFromSchema } from "../tlv/TlvSchema.js";
-import { BitFlag } from "../schema/BitmapSchema.js";
+import { BitFlag, BitField } from "../schema/BitmapSchema.js";
 import { Status } from "../globals/Status.js";
 import { ClusterType } from "../cluster/ClusterType.js";
 import { Identity } from "#general";
@@ -23,8 +23,8 @@ export declare namespace DoorLock {
          *
          * If the User Feature is also supported then any PIN Code stored in the lock shall be associated with a User.
          *
-         * A lock may support multiple credential types so if the User feature is supported the UserType, UserStatus
-         * and Schedules are all associated with a User index and not directly with a PIN index. A User index may have
+         * A lock may support multiple credential types so if the User feature is supported the UserType, UserStatus and
+         * Schedules are all associated with a User index and not directly with a PIN index. A User index may have
          * several credentials associated with it.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 5.2.4.1
@@ -36,8 +36,8 @@ export declare namespace DoorLock {
          * If the User Feature is also supported then any RFID credential stored in the lock shall be associated with a
          * User.
          *
-         * A lock may support multiple credential types so if the User feature is supported the UserType, UserStatus
-         * and Schedules are all associated with a User index and not directly with a RFID index. A User Index may have
+         * A lock may support multiple credential types so if the User feature is supported the UserType, UserStatus and
+         * Schedules are all associated with a User index and not directly with a RFID index. A User Index may have
          * several credentials associated with it.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 5.2.4.2
@@ -47,13 +47,13 @@ export declare namespace DoorLock {
          * FingerCredentials (FGP)
          *
          * Currently the cluster only defines the metadata format for notifications when a fingerprint/ finger vein
-         * credential is used to access the lock and doesn’t describe how to create fingerprint/finger vein
-         * credentials. If the Users feature is also supported then the User that a fingerprint/finger vein is
-         * associated with can also have its UserType, UserStatus and Schedule modified.
+         * credential is used to access the lock and doesn’t describe how to create fingerprint/finger vein credentials.
+         * If the Users feature is also supported then the User that a fingerprint/finger vein is associated with can
+         * also have its UserType, UserStatus and Schedule modified.
          *
-         * A lock may support multiple credential types so if the User feature is supported the UserType, UserStatus
-         * and Schedules are all associated with a User index and not directly with a Finger index. A User Index may
-         * have several credentials associated with it.
+         * A lock may support multiple credential types so if the User feature is supported the UserType, UserStatus and
+         * Schedules are all associated with a User index and not directly with a Finger index. A User Index may have
+         * several credentials associated with it.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 5.2.4.3
          */
@@ -90,8 +90,8 @@ export declare namespace DoorLock {
          * retina credentials. If the Users feature is also supported then the User that a face recognition, iris, or
          * retina credential is associated with can also have its UserType, UserStatus and Schedule modified.
          *
-         * A lock may support multiple credential types so if the User feature is supported the UserType, UserStatus
-         * and Schedules are all associated with a User and not directly with a credential.
+         * A lock may support multiple credential types so if the User feature is supported the UserType, UserStatus and
+         * Schedules are all associated with a User and not directly with a credential.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 5.2.4.6
          */
@@ -110,9 +110,9 @@ export declare namespace DoorLock {
         /**
          * User (USR)
          *
-         * If the User Feature is supported then a lock employs a User database. A User within the User database is
-         * used to associate credentials and schedules to single user record within the lock. This also means the
-         * UserType and UserStatus fields are associated with a User and not a credential.
+         * If the User Feature is supported then a lock employs a User database. A User within the User database is used
+         * to associate credentials and schedules to single user record within the lock. This also means the UserType
+         * and UserStatus fields are associated with a User and not a credential.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 5.2.4.8
          */
@@ -120,8 +120,8 @@ export declare namespace DoorLock {
         /**
          * YearDayAccessSchedules (YDSCH)
          *
-         * If the User feature is supported then Year Day Schedules are applied to a User and not a credential. Year
-         * Day Schedules are used to restrict access to a specified date and time window.
+         * If the User feature is supported then Year Day Schedules are applied to a User and not a credential. Year Day
+         * Schedules are used to restrict access to a specified date and time window.
          *
          * The lock may automatically adjust the UserType when a schedule is created or cleared.
          *
@@ -145,10 +145,10 @@ export declare namespace DoorLock {
          * Unbolting (UBOLT)
          *
          * Locks that support this feature differentiate between unbolting and unlocking. The Unbolt Door command
-         * retracts the bolt without pulling the latch. The Unlock Door command fully unlocks the door by retracting
-         * the bolt and briefly pulling the latch. While the latch is pulled, the lock state changes to Unlatched.
-         * Locks without unbolting support don’t differentiate between unbolting and unlocking and perform the same
-         * operation for both commands.
+         * retracts the bolt without pulling the latch. The Unlock Door command fully unlocks the door by retracting the
+         * bolt and briefly pulling the latch. While the latch is pulled, the lock state changes to Unlatched. Locks
+         * without unbolting support don’t differentiate between unbolting and unlocking and perform the same operation
+         * for both commands.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 5.2.4.11
          */
@@ -156,8 +156,8 @@ export declare namespace DoorLock {
         /**
          * AliroProvisioning (ALIRO)
          *
-         * Locks that support this feature implement the Aliro specification as defined in [Aliro] and support Matter
-         * as a method for provisioning Aliro credentials.
+         * Locks that support this feature implement the Aliro specification as defined in [Aliro] and support Matter as
+         * a method for provisioning Aliro credentials.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 5.2.4.12
          */
@@ -301,8 +301,8 @@ export declare namespace DoorLock {
          *   • If no YearDaySchedules are set for the user, then access shall be denied
          *
          *   • If one or more YearDaySchedules are set, user access shall be granted if and only if the current time
-         *     falls within at least one of the YearDaySchedules. If current time is not known, user access shall NOT
-         *     be granted.
+         *     falls within at least one of the YearDaySchedules. If current time is not known, user access shall NOT be
+         *     granted.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 5.2.6.18.2
          */
@@ -318,8 +318,8 @@ export declare namespace DoorLock {
          *   • If no WeekDaySchedules are set for the user, then access shall be denied
          *
          *   • If one or more WeekDaySchedules are set, user access shall be granted if and only if the current time
-         *     falls within at least one of the WeekDaySchedules. If current time is not known, user access shall NOT
-         *     be granted.
+         *     falls within at least one of the WeekDaySchedules. If current time is not known, user access shall NOT be
+         *     granted.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 5.2.6.18.3
          */
@@ -328,8 +328,8 @@ export declare namespace DoorLock {
          * The user ID type is programming
          *
          * This value shall indicate the user has the ability to both program and operate the door lock. This user can
-         * manage the users and user schedules. In all other respects this user matches the unrestricted (default)
-         * user. ProgrammingUser is the only user that can disable the user interface (keypad, remote, etc…).
+         * manage the users and user schedules. In all other respects this user matches the unrestricted (default) user.
+         * ProgrammingUser is the only user that can disable the user interface (keypad, remote, etc…).
          *
          * @see {@link MatterSpecification.v13.Cluster} § 5.2.6.18.4
          */
@@ -388,8 +388,8 @@ export declare namespace DoorLock {
          *     shall be equivalent to the YearDayScheduleUser UserType
          *
          *   • If one or WeekDaySchedules are set AND one or more YearDaySchedules are set, then user access shall be
-         *     granted if and only if the current time falls within at least one of the WeekDaySchedules AND the
-         *     current time falls within at least one of the YearDaySchedules.
+         *     granted if and only if the current time falls within at least one of the WeekDaySchedules AND the current
+         *     time falls within at least one of the YearDaySchedules.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 5.2.6.18.9
          */
@@ -466,8 +466,8 @@ export declare namespace DoorLock {
          *   • If the OperationType is Add, the UserUniqueID in the resulting user record shall be set to default value
          *     specified above.
          *
-         *   • If the OperationType is Modify, the UserUniqueID in the user record shall NOT be changed from the
-         *     current value.
+         *   • If the OperationType is Modify, the UserUniqueID in the user record shall NOT be changed from the current
+         *     value.
          *
          * If UserUniqueID is not null, the UserUniqueID in the user record shall be set to the provided value.
          *
@@ -507,8 +507,8 @@ export declare namespace DoorLock {
         /**
          * This field shall indicate the CredentialRule to use for this user.
          *
-         * The valid CredentialRule enumeration values depends on the bits in the CredentialRulesBitmap map. Each bit
-         * in the map identifies a valid CredentialRule that can be used.
+         * The valid CredentialRule enumeration values depends on the bits in the CredentialRulesBitmap map. Each bit in
+         * the map identifies a valid CredentialRule that can be used.
          *
          * If CredentialRule is null then:
          *
@@ -579,8 +579,8 @@ export declare namespace DoorLock {
         /**
          * A Credential Issuer public key as defined in [Aliro]
          *
-         * Credentials of this type shall be 65-byte uncompressed elliptic curve public keys as defined in section
-         * 2.3.3 of SEC 1.
+         * Credentials of this type shall be 65-byte uncompressed elliptic curve public keys as defined in section 2.3.3
+         * of SEC 1.
          *
          * Credentials of this type shall NOT be used to allow operating the lock. They shall be used, as defined in
          * [Aliro], to create new credentials of type AliroEvictableEndpointKey via a step-up transaction.
@@ -592,15 +592,15 @@ export declare namespace DoorLock {
          * When a new credential of type AliroEvictableEndpointKey is added in this manner, it shall be associated with
          * the same user record as the AliroCredentialIssuerKey credential that allowed the new credential to be added.
          *
-         * If there are no available credential slots to add a new AliroEvictableEndpointKey credential (i.e. either
-         * the NumberOfCredentialsSupportedPerUser or the NumberOfAliroEndpointKeysSupported limit has been reached)
-         * but there exist credentials of type AliroEvictableEndpointKey associated with the user record, the server
-         * shall remove one of those credentials using the same procedure it would follow for the ClearCredential
-         * command before adding the new credential.
+         * If there are no available credential slots to add a new AliroEvictableEndpointKey credential (i.e. either the
+         * NumberOfCredentialsSupportedPerUser or the NumberOfAliroEndpointKeysSupported limit has been reached) but
+         * there exist credentials of type AliroEvictableEndpointKey associated with the user record, the server shall
+         * remove one of those credentials using the same procedure it would follow for the ClearCredential command
+         * before adding the new credential.
          *
-         * If there are no available credential slots to add a new AliroEvictableEndpointKey credential (i.e. either
-         * the NumberOfCredentialsSupportedPerUser or the NumberOfAliroEndpointKeysSupported limit has been reached)
-         * and there do not exist credentials of type AliroEvictableEndpointKey associated with the user record, a new
+         * If there are no available credential slots to add a new AliroEvictableEndpointKey credential (i.e. either the
+         * NumberOfCredentialsSupportedPerUser or the NumberOfAliroEndpointKeysSupported limit has been reached) and
+         * there do not exist credentials of type AliroEvictableEndpointKey associated with the user record, a new
          * AliroEvictableEndpointKey credential shall NOT be created.
          *
          * If the step-up process results in addition of new credentials, the corresponding LockUserChange event shall
@@ -618,8 +618,8 @@ export declare namespace DoorLock {
         /**
          * An Endpoint public key as defined in [Aliro] which can be evicted if space is needed for another endpoint key
          *
-         * Credentials of this type shall be 65-byte uncompressed elliptic curve public keys as defined in section
-         * 2.3.3 of SEC 1.
+         * Credentials of this type shall be 65-byte uncompressed elliptic curve public keys as defined in section 2.3.3
+         * of SEC 1.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 5.2.6.9.2
          */
@@ -628,8 +628,8 @@ export declare namespace DoorLock {
          * An Endpoint public key as defined in [Aliro] which cannot be evicted if space is needed for another endpoint
          * key
          *
-         * Credentials of this type shall be 65-byte uncompressed elliptic curve public keys as defined in section
-         * 2.3.3 of SEC 1.
+         * Credentials of this type shall be 65-byte uncompressed elliptic curve public keys as defined in section 2.3.3
+         * of SEC 1.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 5.2.6.9.3
          */
@@ -751,10 +751,9 @@ export declare namespace DoorLock {
          */
         lastModifiedFabricIndex: import("../tlv/TlvObject.js").FieldType<import("../datatype/FabricIndex.js").FabricIndex | null>;
         /**
-         * This field shall indicate the next occupied UserIndex in the database which is useful for quickly
-         * identifying occupied user slots in the database. This shall NOT be null if there is at least one occupied
-         * entry after the requested UserIndex in the User database and shall be null if there are no more occupied
-         * entries.
+         * This field shall indicate the next occupied UserIndex in the database which is useful for quickly identifying
+         * occupied user slots in the database. This shall NOT be null if there is at least one occupied entry after the
+         * requested UserIndex in the User database and shall be null if there are no more occupied entries.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.34.10
          */
@@ -804,8 +803,8 @@ export declare namespace DoorLock {
          */
         operationType: import("../tlv/TlvObject.js").FieldType<DataOperationType>;
         /**
-         * This field shall contain a credential structure that contains the CredentialTypeEnum and the credential
-         * index (if applicable or 0 if not) to set.
+         * This field shall contain a credential structure that contains the CredentialTypeEnum and the credential index
+         * (if applicable or 0 if not) to set.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.36.2
          */
@@ -834,9 +833,9 @@ export declare namespace DoorLock {
          */
         credentialData: import("../tlv/TlvObject.js").FieldType<Uint8Array<ArrayBufferLike>>;
         /**
-         * This field shall indicate the user index to the user record that corresponds to the credential being added
-         * or modified. This shall be null if OperationType is add and a new credential and user is being added at the
-         * same time.
+         * This field shall indicate the user index to the user record that corresponds to the credential being added or
+         * modified. This shall be null if OperationType is add and a new credential and user is being added at the same
+         * time.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.36.4
          */
@@ -916,10 +915,10 @@ export declare namespace DoorLock {
         userIndex: import("../tlv/TlvObject.js").FieldType<number | null>;
         /**
          * This field shall indicate the next available index in the database for the credential type set, which is
-         * useful for quickly identifying available credential slots in the database. This shall NOT be null if there
-         * is at least one available entry after the requested credential index in the corresponding database and shall
-         * be null if there are no more available entries. The NextCredentialIndex reported shall NOT exceed the
-         * maximum number of credentials for a particular credential type.
+         * useful for quickly identifying available credential slots in the database. This shall NOT be null if there is
+         * at least one available entry after the requested credential index in the corresponding database and shall be
+         * null if there are no more available entries. The NextCredentialIndex reported shall NOT exceed the maximum
+         * number of credentials for a particular credential type.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.37.3
          */
@@ -939,8 +938,8 @@ export declare namespace DoorLock {
      */
     const TlvGetCredentialStatusRequest: import("../tlv/TlvObject.js").ObjectSchema<{
         /**
-         * This field shall contain a credential structure that contains the CredentialTypeEnum and the credential
-         * index (if applicable or 0 if not) to retrieve the status for.
+         * This field shall contain a credential structure that contains the CredentialTypeEnum and the credential index
+         * (if applicable or 0 if not) to retrieve the status for.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.38.1
          */
@@ -1008,9 +1007,9 @@ export declare namespace DoorLock {
          */
         lastModifiedFabricIndex: import("../tlv/TlvObject.js").FieldType<import("../datatype/FabricIndex.js").FabricIndex | null>;
         /**
-         * This field shall indicate the next occupied index in the database for the credential type requested, which
-         * is useful for quickly identifying occupied credential slots in the database. This shall NOT be null if there
-         * is at least one occupied entry after the requested credential index in the corresponding
+         * This field shall indicate the next occupied index in the database for the credential type requested, which is
+         * useful for quickly identifying occupied credential slots in the database. This shall NOT be null if there is
+         * at least one occupied entry after the requested credential index in the corresponding
          *
          * database and shall be null if there are no more occupied entries. The NextCredentialIndex reported shall NOT
          * exceed the maximum number of credentials for a particular credential type.
@@ -1052,9 +1051,9 @@ export declare namespace DoorLock {
      */
     const TlvClearCredentialRequest: import("../tlv/TlvObject.js").ObjectSchema<{
         /**
-         * This field shall contain a credential structure that contains the CredentialTypeEnum and the credential
-         * index (0xFFFE for all credentials or 0 if not applicable) to clear. This shall be null if clearing all
-         * credential types otherwise it shall NOT be null.
+         * This field shall contain a credential structure that contains the CredentialTypeEnum and the credential index
+         * (0xFFFE for all credentials or 0 if not applicable) to clear. This shall be null if clearing all credential
+         * types otherwise it shall NOT be null.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.40.1
          */
@@ -1222,9 +1221,9 @@ export declare namespace DoorLock {
          */
         operationSource: import("../tlv/TlvObject.js").FieldType<OperationSource>;
         /**
-         * This field shall indicate the lock UserIndex associated with the change (if any). This shall be null if
-         * there is no specific user associated with the data operation. This shall be 0xFFFE if all users are affected
-         * (e.g. Clear Users).
+         * This field shall indicate the lock UserIndex associated with the change (if any). This shall be null if there
+         * is no specific user associated with the data operation. This shall be 0xFFFE if all users are affected (e.g.
+         * Clear Users).
          *
          * @see {@link MatterSpecification.v13.Cluster} § 5.2.11.5.4
          */
@@ -1246,10 +1245,10 @@ export declare namespace DoorLock {
          */
         sourceNode: import("../tlv/TlvObject.js").FieldType<import("../datatype/NodeId.js").NodeId | null>;
         /**
-         * This field shall indicate the index of the specific item that was changed (e.g. schedule, PIN, RFID, etc.)
-         * in the list of items identified by LockDataType. This shall be null if the LockDataType does not correspond
-         * to a list that can be indexed into (e.g. ProgrammingUser). This shall be 0xFFFE if all indices are affected
-         * (e.g. ClearPINCode, ClearRFIDCode, ClearWeekDaySchedule, ClearYearDaySchedule, etc.).
+         * This field shall indicate the index of the specific item that was changed (e.g. schedule, PIN, RFID, etc.) in
+         * the list of items identified by LockDataType. This shall be null if the LockDataType does not correspond to a
+         * list that can be indexed into (e.g. ProgrammingUser). This shall be 0xFFFE if all indices are affected (e.g.
+         * ClearPINCode, ClearRFIDCode, ClearWeekDaySchedule, ClearYearDaySchedule, etc.).
          *
          * @see {@link MatterSpecification.v13.Cluster} § 5.2.11.5.7
          */
@@ -1632,8 +1631,8 @@ export declare namespace DoorLock {
         /**
          * This field shall indicate the ending time for the Year Day schedule in Epoch Time in Seconds with local time
          * offset based on the local timezone and DST offset on the day represented by the value. LocalEndTime shall be
-         * greater than LocalStartTime. This shall be null if the schedule is not set for the YearDayIndex and
-         * UserIndex provided.
+         * greater than LocalStartTime. This shall be null if the schedule is not set for the YearDayIndex and UserIndex
+         * provided.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.18.5
          */
@@ -1682,10 +1681,10 @@ export declare namespace DoorLock {
      *
      * NOTE
      *
-     * For modes that disable the remote interface, the door lock shall respond to Lock, Unlock, Toggle, and Unlock
-     * with Timeout commands with a response status Failure and not take the action requested by those commands. The
-     * door lock shall NOT disable the radio or otherwise unbind or leave the network. It shall still respond to all
-     * other commands and requests.
+     * For modes that disable the remote interface, the door lock shall respond to Lock, Unlock, Toggle, and Unlock with
+     * Timeout commands with a response status Failure and not take the action requested by those commands. The door
+     * lock shall NOT disable the radio or otherwise unbind or leave the network. It shall still respond to all other
+     * commands and requests.
      *
      * @see {@link MatterSpecification.v13.Cluster} § 5.2.6.15
      */
@@ -1703,17 +1702,16 @@ export declare namespace DoorLock {
          */
         Vacation = 1,
         /**
-         * This mode is only possible if the door is locked. Manual unlocking changes the mode to Normal operating
-         * mode. All external interaction with the door lock is disabled. This mode is intended to be used so that
-         * users, presumably inside the property, will have control over the entrance.
+         * This mode is only possible if the door is locked. Manual unlocking changes the mode to Normal operating mode.
+         * All external interaction with the door lock is disabled. This mode is intended to be used so that users,
+         * presumably inside the property, will have control over the entrance.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 5.2.6.15.3
          */
         Privacy = 2,
         /**
-         * This mode only disables remote interaction with the lock. This does not apply to any remote proprietary
-         * means of communication. It specifically applies to the Lock, Unlock, Toggle, and Unlock with Timeout
-         * Commands.
+         * This mode only disables remote interaction with the lock. This does not apply to any remote proprietary means
+         * of communication. It specifically applies to the Lock, Unlock, Toggle, and Unlock with Timeout Commands.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 5.2.6.15.4
          */
@@ -1813,9 +1811,9 @@ export declare namespace DoorLock {
          */
         status: import("../tlv/TlvObject.js").FieldType<Status>;
         /**
-         * This field shall indicate the starting time for the Holiday schedule in Epoch Time in Seconds with local
-         * time offset based on the local timezone and DST offset on the day represented by the value. This shall be
-         * null if the schedule is not set for the HolidayIndex provided.
+         * This field shall indicate the starting time for the Holiday schedule in Epoch Time in Seconds with local time
+         * offset based on the local timezone and DST offset on the day represented by the value. This shall be null if
+         * the schedule is not set for the HolidayIndex provided.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.22.3
          */
@@ -1877,8 +1875,8 @@ export declare namespace DoorLock {
          */
         userId: import("../tlv/TlvObject.js").FieldType<number>;
         /**
-         * This field shall indicate the user status. Only the values 1 (Occupied/Enabled) and 3 (Occupied/Disabled)
-         * are allowed for UserStatus.
+         * This field shall indicate the user status. Only the values 1 (Occupied/Enabled) and 3 (Occupied/Disabled) are
+         * allowed for UserStatus.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.4.2
          */
@@ -1923,8 +1921,8 @@ export declare namespace DoorLock {
      * UserID = requested User ID UserStatus = 0 (Available) UserType = Null (Not supported) PINCode = 0 (zero length)
      *
      * If the requested UserID is invalid, send Default Response with an error status. The error status shall be equal
-     * to CONSTRAINT_ERROR when User_ID is less than the max number of users supported, and NOT_FOUND if greater than
-     * or equal to the max number of users supported.
+     * to CONSTRAINT_ERROR when User_ID is less than the max number of users supported, and NOT_FOUND if greater than or
+     * equal to the max number of users supported.
      *
      * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.6
      */
@@ -1943,8 +1941,8 @@ export declare namespace DoorLock {
      * UserID = requested User ID UserStatus = 0 (Available) UserType = Null (Not supported) PINCode = 0 (zero length)
      *
      * If the requested UserID is invalid, send Default Response with an error status. The error status shall be equal
-     * to CONSTRAINT_ERROR when User_ID is less than the max number of users supported, and NOT_FOUND if greater than
-     * or equal to the max number of users supported.
+     * to CONSTRAINT_ERROR when User_ID is less than the max number of users supported, and NOT_FOUND if greater than or
+     * equal to the max number of users supported.
      *
      * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.6
      */
@@ -2396,29 +2394,37 @@ export declare namespace DoorLock {
         Medium = 3
     }
     /**
+     * For the OperatingModesBitmap, a bit SET indicates that the operating mode IS NOT supported. A bit CLEAR indicates
+     * that the operating mode IS supported. This is the inverse of most bitmaps in this specification, and it is
+     * RECOMMENDED that clients carefully take this into consideration.
+     *
      * @see {@link MatterSpecification.v13.Cluster} § 5.2.6.3
      */
     const OperatingModes: {
         /**
-         * Normal operation mode
+         * Normal operation mode is NOT supported
          */
         normal: BitFlag;
         /**
-         * Vacation operation mode
+         * Vacation operation mode is NOT supported
          */
         vacation: BitFlag;
         /**
-         * Privacy operation mode
+         * Privacy operation mode is NOT supported
          */
         privacy: BitFlag;
         /**
-         * No remote lock and unlock operation mode
+         * No remote lock and unlock operation mode is NOT supported
          */
         noRemoteLockUnlock: BitFlag;
         /**
-         * Passage operation mode
+         * Passage operation mode is NOT supported
          */
         passage: BitFlag;
+        /**
+         * This needs always be set because this bitmap is inverse.!
+         */
+        alwaysSet: BitField;
     };
     /**
      * @see {@link MatterSpecification.v13.Cluster} § 5.2.6.4
@@ -2589,8 +2595,8 @@ export declare namespace DoorLock {
          * If the RequirePINforRemoteOperation attribute is True then PINCode field shall be provided and the door lock
          * shall NOT grant access if it is not provided.
          *
-         * If the PINCode field is provided, the door lock shall verify PINCode before granting access regardless of
-         * the value of RequirePINForRemoteOperation attribute.
+         * If the PINCode field is provided, the door lock shall verify PINCode before granting access regardless of the
+         * value of RequirePINForRemoteOperation attribute.
          *
          * When the PINCode field is provided an invalid PIN will count towards the WrongCodeEntryLimit and the
          * UserCodeTemporaryDisableTime will be triggered if the WrongCodeEntryLimit is exceeded. The lock shall ignore
@@ -2864,8 +2870,8 @@ export declare namespace DoorLock {
          */
         operationError: import("../tlv/TlvObject.js").FieldType<OperationError>;
         /**
-         * This field shall indicate the lock UserIndex who performed the lock operation. This shall be null if there
-         * is no user id that can be determined for the given operation source.
+         * This field shall indicate the lock UserIndex who performed the lock operation. This shall be null if there is
+         * no user id that can be determined for the given operation source.
          *
          * @see {@link MatterSpecification.v13.Cluster} § 5.2.11.4.4
          */
@@ -3007,8 +3013,8 @@ export declare namespace DoorLock {
              */
             readonly numberOfTotalUsersSupported: FixedAttribute<number, any>;
             /**
-             * This attribute shall contain a bitmap with the bits set for the values of CredentialRuleEnum supported
-             * on this device.
+             * This attribute shall contain a bitmap with the bits set for the values of CredentialRuleEnum supported on
+             * this device.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 5.2.9.18
              */
@@ -3029,8 +3035,8 @@ export declare namespace DoorLock {
             /**
              * Indicates the number of credentials that could be assigned for each user.
              *
-             * Depending on the value of NumberOfRFIDUsersSupported and NumberOfPINUsersSupported it may not be
-             * possible to assign that number of credentials for a user.
+             * Depending on the value of NumberOfRFIDUsersSupported and NumberOfPINUsersSupported it may not be possible
+             * to assign that number of credentials for a user.
              *
              * For example, if the device supports only PIN and RFID credential types,
              * NumberOfCredentialsSupportedPerUser is set to 10, NumberOfPINUsersSupported is set to 5 and
@@ -3042,8 +3048,8 @@ export declare namespace DoorLock {
             readonly numberOfCredentialsSupportedPerUser: FixedAttribute<number, any>;
             /**
              * Indicates the number of minutes a PIN, RFID, Fingerprint, or other credential associated with a user of
-             * type ExpiringUser shall remain valid after its first use before expiring. When the credential expires
-             * the UserStatus for the corresponding user record shall be set to OccupiedDisabled.
+             * type ExpiringUser shall remain valid after its first use before expiring. When the credential expires the
+             * UserStatus for the corresponding user record shall be set to OccupiedDisabled.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 5.2.9.36
              */
@@ -3106,8 +3112,8 @@ export declare namespace DoorLock {
                  *   • If the OperationType is Add, the UserUniqueID in the resulting user record shall be set to default value
                  *     specified above.
                  *
-                 *   • If the OperationType is Modify, the UserUniqueID in the user record shall NOT be changed from the
-                 *     current value.
+                 *   • If the OperationType is Modify, the UserUniqueID in the user record shall NOT be changed from the current
+                 *     value.
                  *
                  * If UserUniqueID is not null, the UserUniqueID in the user record shall be set to the provided value.
                  *
@@ -3147,8 +3153,8 @@ export declare namespace DoorLock {
                 /**
                  * This field shall indicate the CredentialRule to use for this user.
                  *
-                 * The valid CredentialRule enumeration values depends on the bits in the CredentialRulesBitmap map. Each bit
-                 * in the map identifies a valid CredentialRule that can be used.
+                 * The valid CredentialRule enumeration values depends on the bits in the CredentialRulesBitmap map. Each bit in
+                 * the map identifies a valid CredentialRule that can be used.
                  *
                  * If CredentialRule is null then:
                  *
@@ -3253,10 +3259,9 @@ export declare namespace DoorLock {
                  */
                 lastModifiedFabricIndex: import("../tlv/TlvObject.js").FieldType<import("../datatype/FabricIndex.js").FabricIndex | null>;
                 /**
-                 * This field shall indicate the next occupied UserIndex in the database which is useful for quickly
-                 * identifying occupied user slots in the database. This shall NOT be null if there is at least one occupied
-                 * entry after the requested UserIndex in the User database and shall be null if there are no more occupied
-                 * entries.
+                 * This field shall indicate the next occupied UserIndex in the database which is useful for quickly identifying
+                 * occupied user slots in the database. This shall NOT be null if there is at least one occupied entry after the
+                 * requested UserIndex in the User database and shall be null if there are no more occupied entries.
                  *
                  * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.34.10
                  */
@@ -3297,8 +3302,8 @@ export declare namespace DoorLock {
                  */
                 operationType: import("../tlv/TlvObject.js").FieldType<DataOperationType>;
                 /**
-                 * This field shall contain a credential structure that contains the CredentialTypeEnum and the credential
-                 * index (if applicable or 0 if not) to set.
+                 * This field shall contain a credential structure that contains the CredentialTypeEnum and the credential index
+                 * (if applicable or 0 if not) to set.
                  *
                  * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.36.2
                  */
@@ -3327,9 +3332,9 @@ export declare namespace DoorLock {
                  */
                 credentialData: import("../tlv/TlvObject.js").FieldType<Uint8Array<ArrayBufferLike>>;
                 /**
-                 * This field shall indicate the user index to the user record that corresponds to the credential being added
-                 * or modified. This shall be null if OperationType is add and a new credential and user is being added at the
-                 * same time.
+                 * This field shall indicate the user index to the user record that corresponds to the credential being added or
+                 * modified. This shall be null if OperationType is add and a new credential and user is being added at the same
+                 * time.
                  *
                  * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.36.4
                  */
@@ -3396,10 +3401,10 @@ export declare namespace DoorLock {
                 userIndex: import("../tlv/TlvObject.js").FieldType<number | null>;
                 /**
                  * This field shall indicate the next available index in the database for the credential type set, which is
-                 * useful for quickly identifying available credential slots in the database. This shall NOT be null if there
-                 * is at least one available entry after the requested credential index in the corresponding database and shall
-                 * be null if there are no more available entries. The NextCredentialIndex reported shall NOT exceed the
-                 * maximum number of credentials for a particular credential type.
+                 * useful for quickly identifying available credential slots in the database. This shall NOT be null if there is
+                 * at least one available entry after the requested credential index in the corresponding database and shall be
+                 * null if there are no more available entries. The NextCredentialIndex reported shall NOT exceed the maximum
+                 * number of credentials for a particular credential type.
                  *
                  * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.37.3
                  */
@@ -3415,8 +3420,8 @@ export declare namespace DoorLock {
              */
             readonly getCredentialStatus: Command<import("../tlv/TlvObject.js").TypeFromFields<{
                 /**
-                 * This field shall contain a credential structure that contains the CredentialTypeEnum and the credential
-                 * index (if applicable or 0 if not) to retrieve the status for.
+                 * This field shall contain a credential structure that contains the CredentialTypeEnum and the credential index
+                 * (if applicable or 0 if not) to retrieve the status for.
                  *
                  * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.38.1
                  */
@@ -3471,9 +3476,9 @@ export declare namespace DoorLock {
                  */
                 lastModifiedFabricIndex: import("../tlv/TlvObject.js").FieldType<import("../datatype/FabricIndex.js").FabricIndex | null>;
                 /**
-                 * This field shall indicate the next occupied index in the database for the credential type requested, which
-                 * is useful for quickly identifying occupied credential slots in the database. This shall NOT be null if there
-                 * is at least one occupied entry after the requested credential index in the corresponding
+                 * This field shall indicate the next occupied index in the database for the credential type requested, which is
+                 * useful for quickly identifying occupied credential slots in the database. This shall NOT be null if there is
+                 * at least one occupied entry after the requested credential index in the corresponding
                  *
                  * database and shall be null if there are no more occupied entries. The NextCredentialIndex reported shall NOT
                  * exceed the maximum number of credentials for a particular credential type.
@@ -3517,9 +3522,9 @@ export declare namespace DoorLock {
              */
             readonly clearCredential: Command<import("../tlv/TlvObject.js").TypeFromFields<{
                 /**
-                 * This field shall contain a credential structure that contains the CredentialTypeEnum and the credential
-                 * index (0xFFFE for all credentials or 0 if not applicable) to clear. This shall be null if clearing all
-                 * credential types otherwise it shall NOT be null.
+                 * This field shall contain a credential structure that contains the CredentialTypeEnum and the credential index
+                 * (0xFFFE for all credentials or 0 if not applicable) to clear. This shall be null if clearing all credential
+                 * types otherwise it shall NOT be null.
                  *
                  * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.40.1
                  */
@@ -3568,9 +3573,9 @@ export declare namespace DoorLock {
                  */
                 operationSource: import("../tlv/TlvObject.js").FieldType<OperationSource>;
                 /**
-                 * This field shall indicate the lock UserIndex associated with the change (if any). This shall be null if
-                 * there is no specific user associated with the data operation. This shall be 0xFFFE if all users are affected
-                 * (e.g. Clear Users).
+                 * This field shall indicate the lock UserIndex associated with the change (if any). This shall be null if there
+                 * is no specific user associated with the data operation. This shall be 0xFFFE if all users are affected (e.g.
+                 * Clear Users).
                  *
                  * @see {@link MatterSpecification.v13.Cluster} § 5.2.11.5.4
                  */
@@ -3592,10 +3597,10 @@ export declare namespace DoorLock {
                  */
                 sourceNode: import("../tlv/TlvObject.js").FieldType<import("../datatype/NodeId.js").NodeId | null>;
                 /**
-                 * This field shall indicate the index of the specific item that was changed (e.g. schedule, PIN, RFID, etc.)
-                 * in the list of items identified by LockDataType. This shall be null if the LockDataType does not correspond
-                 * to a list that can be indexed into (e.g. ProgrammingUser). This shall be 0xFFFE if all indices are affected
-                 * (e.g. ClearPINCode, ClearRFIDCode, ClearWeekDaySchedule, ClearYearDaySchedule, etc.).
+                 * This field shall indicate the index of the specific item that was changed (e.g. schedule, PIN, RFID, etc.) in
+                 * the list of items identified by LockDataType. This shall be null if the LockDataType does not correspond to a
+                 * list that can be indexed into (e.g. ProgrammingUser). This shall be 0xFFFE if all indices are affected (e.g.
+                 * ClearPINCode, ClearRFIDCode, ClearWeekDaySchedule, ClearYearDaySchedule, etc.).
                  *
                  * @see {@link MatterSpecification.v13.Cluster} § 5.2.11.5.7
                  */
@@ -3978,8 +3983,8 @@ export declare namespace DoorLock {
                 /**
                  * This field shall indicate the ending time for the Year Day schedule in Epoch Time in Seconds with local time
                  * offset based on the local timezone and DST offset on the day represented by the value. LocalEndTime shall be
-                 * greater than LocalStartTime. This shall be null if the schedule is not set for the YearDayIndex and
-                 * UserIndex provided.
+                 * greater than LocalStartTime. This shall be null if the schedule is not set for the YearDayIndex and UserIndex
+                 * provided.
                  *
                  * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.18.5
                  */
@@ -4092,9 +4097,9 @@ export declare namespace DoorLock {
                  */
                 status: import("../tlv/TlvObject.js").FieldType<Status>;
                 /**
-                 * This field shall indicate the starting time for the Holiday schedule in Epoch Time in Seconds with local
-                 * time offset based on the local timezone and DST offset on the day represented by the value. This shall be
-                 * null if the schedule is not set for the HolidayIndex provided.
+                 * This field shall indicate the starting time for the Holiday schedule in Epoch Time in Seconds with local time
+                 * offset based on the local timezone and DST offset on the day represented by the value. This shall be null if
+                 * the schedule is not set for the HolidayIndex provided.
                  *
                  * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.22.3
                  */
@@ -4151,10 +4156,10 @@ export declare namespace DoorLock {
              */
             readonly wrongCodeEntryLimit: WritableAttribute<number, any>;
             /**
-             * Indicates the number of seconds that the lock shuts down following wrong code entry. Valid range is
-             * 1-255 seconds. Device can shut down to lock user out for specified amount of time. (Makes it difficult
-             * to try and guess a PIN for the device.) If the attribute accepts writes and an attempt to write the
-             * attribute to 0 is made, the device shall respond with CONSTRAINT_ERROR.
+             * Indicates the number of seconds that the lock shuts down following wrong code entry. Valid range is 1-255
+             * seconds. Device can shut down to lock user out for specified amount of time. (Makes it difficult to try
+             * and guess a PIN for the device.) If the attribute accepts writes and an attempt to write the attribute to
+             * 0 is made, the device shall respond with CONSTRAINT_ERROR.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 5.2.9.33
              */
@@ -4200,8 +4205,8 @@ export declare namespace DoorLock {
                  */
                 userId: import("../tlv/TlvObject.js").FieldType<number>;
                 /**
-                 * This field shall indicate the user status. Only the values 1 (Occupied/Enabled) and 3 (Occupied/Disabled)
-                 * are allowed for UserStatus.
+                 * This field shall indicate the user status. Only the values 1 (Occupied/Enabled) and 3 (Occupied/Disabled) are
+                 * allowed for UserStatus.
                  *
                  * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.4.2
                  */
@@ -4371,8 +4376,8 @@ export declare namespace DoorLock {
              * NOTE
              *
              * Using this command will revoke the ability of all existing Aliro user devices that have the old
-             * verification key to interact with the lock. This effect is not restricted to a single fabric or
-             * otherwise scoped in any way.
+             * verification key to interact with the lock. This effect is not restricted to a single fabric or otherwise
+             * scoped in any way.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.43
              */
@@ -4630,9 +4635,9 @@ export declare namespace DoorLock {
              * If the User Feature is also supported then any PIN Code stored in the lock shall be associated with a
              * User.
              *
-             * A lock may support multiple credential types so if the User feature is supported the UserType,
-             * UserStatus and Schedules are all associated with a User index and not directly with a PIN index. A User
-             * index may have several credentials associated with it.
+             * A lock may support multiple credential types so if the User feature is supported the UserType, UserStatus
+             * and Schedules are all associated with a User index and not directly with a PIN index. A User index may
+             * have several credentials associated with it.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 5.2.4.1
              */
@@ -4643,9 +4648,9 @@ export declare namespace DoorLock {
              * If the User Feature is also supported then any RFID credential stored in the lock shall be associated
              * with a User.
              *
-             * A lock may support multiple credential types so if the User feature is supported the UserType,
-             * UserStatus and Schedules are all associated with a User index and not directly with a RFID index. A User
-             * Index may have several credentials associated with it.
+             * A lock may support multiple credential types so if the User feature is supported the UserType, UserStatus
+             * and Schedules are all associated with a User index and not directly with a RFID index. A User Index may
+             * have several credentials associated with it.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 5.2.4.2
              */
@@ -4658,9 +4663,9 @@ export declare namespace DoorLock {
              * credentials. If the Users feature is also supported then the User that a fingerprint/finger vein is
              * associated with can also have its UserType, UserStatus and Schedule modified.
              *
-             * A lock may support multiple credential types so if the User feature is supported the UserType,
-             * UserStatus and Schedules are all associated with a User index and not directly with a Finger index. A
-             * User Index may have several credentials associated with it.
+             * A lock may support multiple credential types so if the User feature is supported the UserType, UserStatus
+             * and Schedules are all associated with a User index and not directly with a Finger index. A User Index may
+             * have several credentials associated with it.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 5.2.4.3
              */
@@ -4699,8 +4704,8 @@ export declare namespace DoorLock {
              * recognition, iris, or retina credential is associated with can also have its UserType, UserStatus and
              * Schedule modified.
              *
-             * A lock may support multiple credential types so if the User feature is supported the UserType,
-             * UserStatus and Schedules are all associated with a User and not directly with a credential.
+             * A lock may support multiple credential types so if the User feature is supported the UserType, UserStatus
+             * and Schedules are all associated with a User and not directly with a credential.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 5.2.4.6
              */
@@ -4729,8 +4734,8 @@ export declare namespace DoorLock {
             /**
              * YearDayAccessSchedules
              *
-             * If the User feature is supported then Year Day Schedules are applied to a User and not a credential.
-             * Year Day Schedules are used to restrict access to a specified date and time window.
+             * If the User feature is supported then Year Day Schedules are applied to a User and not a credential. Year
+             * Day Schedules are used to restrict access to a specified date and time window.
              *
              * The lock may automatically adjust the UserType when a schedule is created or cleared.
              *
@@ -4755,10 +4760,10 @@ export declare namespace DoorLock {
              * Unbolting
              *
              * Locks that support this feature differentiate between unbolting and unlocking. The Unbolt Door command
-             * retracts the bolt without pulling the latch. The Unlock Door command fully unlocks the door by
-             * retracting the bolt and briefly pulling the latch. While the latch is pulled, the lock state changes to
-             * Unlatched. Locks without unbolting support don’t differentiate between unbolting and unlocking and
-             * perform the same operation for both commands.
+             * retracts the bolt without pulling the latch. The Unlock Door command fully unlocks the door by retracting
+             * the bolt and briefly pulling the latch. While the latch is pulled, the lock state changes to Unlatched.
+             * Locks without unbolting support don’t differentiate between unbolting and unlocking and perform the same
+             * operation for both commands.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 5.2.4.11
              */
@@ -4785,8 +4790,8 @@ export declare namespace DoorLock {
         readonly attributes: {
             /**
              * This attribute may be NULL if the lock hardware does not currently know the status of the locking
-             * mechanism. For example, a lock may not know the LockState status after a power cycle until the first
-             * lock actuation is completed.
+             * mechanism. For example, a lock may not know the LockState status after a power cycle until the first lock
+             * actuation is completed.
              *
              * The Not Fully Locked value is used by a lock to indicate that the state of the lock is somewhere between
              * Locked and Unlocked so it is only partially secured. For example, a deadbolt could be partially extended
@@ -4823,8 +4828,8 @@ export declare namespace DoorLock {
             readonly ledSettings: OptionalWritableAttribute<LedSetting, any>;
             /**
              * Indicates the number of seconds to wait after unlocking a lock before it automatically locks again.
-             * 0=disabled. If set, unlock operations from any source will be timed. For one time unlock with timeout
-             * use the specific command.
+             * 0=disabled. If set, unlock operations from any source will be timed. For one time unlock with timeout use
+             * the specific command.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 5.2.9.22
              */
@@ -4842,33 +4847,37 @@ export declare namespace DoorLock {
              */
             readonly operatingMode: WritableAttribute<OperatingMode, any>;
             /**
-             * This attribute shall contain a bitmap with all operating bits of the OperatingMode attribute supported
-             * by the lock. All operating modes NOT supported by a lock shall be set to one. The value of the
-             * OperatingMode enumeration defines the related bit to be set.
+             * This attribute shall contain a bitmap with all operating bits of the OperatingMode attribute supported by
+             * the lock. All operating modes NOT supported by a lock shall be set to one. The value of the OperatingMode
+             * enumeration defines the related bit to be set.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 5.2.9.25
              */
             readonly supportedOperatingModes: FixedAttribute<import("../schema/BitmapSchema.js").TypeFromPartialBitSchema<{
                 /**
-                 * Normal operation mode
+                 * Normal operation mode is NOT supported
                  */
                 normal: BitFlag;
                 /**
-                 * Vacation operation mode
+                 * Vacation operation mode is NOT supported
                  */
                 vacation: BitFlag;
                 /**
-                 * Privacy operation mode
+                 * Privacy operation mode is NOT supported
                  */
                 privacy: BitFlag;
                 /**
-                 * No remote lock and unlock operation mode
+                 * No remote lock and unlock operation mode is NOT supported
                  */
                 noRemoteLockUnlock: BitFlag;
                 /**
-                 * Passage operation mode
+                 * Passage operation mode is NOT supported
                  */
                 passage: BitFlag;
+                /**
+                 * This needs always be set because this bitmap is inverse.!
+                 */
+                alwaysSet: BitField;
             }>, any>;
             /**
              * Indicates the default configurations as they are physically set on the device (example: hardware dip
@@ -4968,9 +4977,9 @@ export declare namespace DoorLock {
             /**
              * This attribute shall enable/disable local programming on the door lock of certain features (see
              * LocalProgrammingFeatures attribute). If this value is set to TRUE then local programming is enabled on
-             * the door lock for all features. If it is set to FALSE then local programming is disabled on the door
-             * lock for those features whose bit is set to 0 in the LocalProgrammingFeatures attribute. Local
-             * programming shall be enabled by default.
+             * the door lock for all features. If it is set to FALSE then local programming is disabled on the door lock
+             * for those features whose bit is set to 0 in the LocalProgrammingFeatures attribute. Local programming
+             * shall be enabled by default.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 5.2.9.27
              */
@@ -5058,10 +5067,10 @@ export declare namespace DoorLock {
                 adjustSettings: BitFlag;
             }>, any>;
             /**
-             * This attribute is only supported if the Alarms cluster is on the same endpoint. The alarm mask is used
-             * to turn on/off alarms for particular functions. Alarms for an alarm group are enabled if the associated
-             * alarm mask bit is set. Each bit represents a group of alarms. Entire alarm groups can be turned on or
-             * off by setting or clearing the associated bit in the alarm mask.
+             * This attribute is only supported if the Alarms cluster is on the same endpoint. The alarm mask is used to
+             * turn on/off alarms for particular functions. Alarms for an alarm group are enabled if the associated
+             * alarm mask bit is set. Each bit represents a group of alarms. Entire alarm groups can be turned on or off
+             * by setting or clearing the associated bit in the alarm mask.
              *
              * This mask DOES NOT apply to the Events mechanism of this cluster.
              *
@@ -5107,8 +5116,8 @@ export declare namespace DoorLock {
                  * If the RequirePINforRemoteOperation attribute is True then PINCode field shall be provided and the door lock
                  * shall NOT grant access if it is not provided.
                  *
-                 * If the PINCode field is provided, the door lock shall verify PINCode before granting access regardless of
-                 * the value of RequirePINForRemoteOperation attribute.
+                 * If the PINCode field is provided, the door lock shall verify PINCode before granting access regardless of the
+                 * value of RequirePINForRemoteOperation attribute.
                  *
                  * When the PINCode field is provided an invalid PIN will count towards the WrongCodeEntryLimit and the
                  * UserCodeTemporaryDisableTime will be triggered if the WrongCodeEntryLimit is exceeded. The lock shall ignore
@@ -5165,8 +5174,8 @@ export declare namespace DoorLock {
         };
         readonly events: {
             /**
-             * The door lock server provides several alarms which can be sent when there is a critical state on the
-             * door lock. The alarms available for the door lock server are listed in AlarmCodeEnum.
+             * The door lock server provides several alarms which can be sent when there is a critical state on the door
+             * lock. The alarms available for the door lock server are listed in AlarmCodeEnum.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 5.2.11.1
              */
@@ -5294,8 +5303,8 @@ export declare namespace DoorLock {
                  */
                 operationError: import("../tlv/TlvObject.js").FieldType<OperationError>;
                 /**
-                 * This field shall indicate the lock UserIndex who performed the lock operation. This shall be null if there
-                 * is no user id that can be determined for the given operation source.
+                 * This field shall indicate the lock UserIndex who performed the lock operation. This shall be null if there is
+                 * no user id that can be determined for the given operation source.
                  *
                  * @see {@link MatterSpecification.v13.Cluster} § 5.2.11.4.4
                  */
@@ -5406,8 +5415,8 @@ export declare namespace DoorLock {
                      */
                     readonly numberOfTotalUsersSupported: FixedAttribute<number, any>;
                     /**
-                     * This attribute shall contain a bitmap with the bits set for the values of CredentialRuleEnum supported
-                     * on this device.
+                     * This attribute shall contain a bitmap with the bits set for the values of CredentialRuleEnum supported on
+                     * this device.
                      *
                      * @see {@link MatterSpecification.v13.Cluster} § 5.2.9.18
                      */
@@ -5428,8 +5437,8 @@ export declare namespace DoorLock {
                     /**
                      * Indicates the number of credentials that could be assigned for each user.
                      *
-                     * Depending on the value of NumberOfRFIDUsersSupported and NumberOfPINUsersSupported it may not be
-                     * possible to assign that number of credentials for a user.
+                     * Depending on the value of NumberOfRFIDUsersSupported and NumberOfPINUsersSupported it may not be possible
+                     * to assign that number of credentials for a user.
                      *
                      * For example, if the device supports only PIN and RFID credential types,
                      * NumberOfCredentialsSupportedPerUser is set to 10, NumberOfPINUsersSupported is set to 5 and
@@ -5441,8 +5450,8 @@ export declare namespace DoorLock {
                     readonly numberOfCredentialsSupportedPerUser: FixedAttribute<number, any>;
                     /**
                      * Indicates the number of minutes a PIN, RFID, Fingerprint, or other credential associated with a user of
-                     * type ExpiringUser shall remain valid after its first use before expiring. When the credential expires
-                     * the UserStatus for the corresponding user record shall be set to OccupiedDisabled.
+                     * type ExpiringUser shall remain valid after its first use before expiring. When the credential expires the
+                     * UserStatus for the corresponding user record shall be set to OccupiedDisabled.
                      *
                      * @see {@link MatterSpecification.v13.Cluster} § 5.2.9.36
                      */
@@ -5505,8 +5514,8 @@ export declare namespace DoorLock {
                          *   • If the OperationType is Add, the UserUniqueID in the resulting user record shall be set to default value
                          *     specified above.
                          *
-                         *   • If the OperationType is Modify, the UserUniqueID in the user record shall NOT be changed from the
-                         *     current value.
+                         *   • If the OperationType is Modify, the UserUniqueID in the user record shall NOT be changed from the current
+                         *     value.
                          *
                          * If UserUniqueID is not null, the UserUniqueID in the user record shall be set to the provided value.
                          *
@@ -5546,8 +5555,8 @@ export declare namespace DoorLock {
                         /**
                          * This field shall indicate the CredentialRule to use for this user.
                          *
-                         * The valid CredentialRule enumeration values depends on the bits in the CredentialRulesBitmap map. Each bit
-                         * in the map identifies a valid CredentialRule that can be used.
+                         * The valid CredentialRule enumeration values depends on the bits in the CredentialRulesBitmap map. Each bit in
+                         * the map identifies a valid CredentialRule that can be used.
                          *
                          * If CredentialRule is null then:
                          *
@@ -5652,10 +5661,9 @@ export declare namespace DoorLock {
                          */
                         lastModifiedFabricIndex: import("../tlv/TlvObject.js").FieldType<import("../datatype/FabricIndex.js").FabricIndex | null>;
                         /**
-                         * This field shall indicate the next occupied UserIndex in the database which is useful for quickly
-                         * identifying occupied user slots in the database. This shall NOT be null if there is at least one occupied
-                         * entry after the requested UserIndex in the User database and shall be null if there are no more occupied
-                         * entries.
+                         * This field shall indicate the next occupied UserIndex in the database which is useful for quickly identifying
+                         * occupied user slots in the database. This shall NOT be null if there is at least one occupied entry after the
+                         * requested UserIndex in the User database and shall be null if there are no more occupied entries.
                          *
                          * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.34.10
                          */
@@ -5696,8 +5704,8 @@ export declare namespace DoorLock {
                          */
                         operationType: import("../tlv/TlvObject.js").FieldType<DataOperationType>;
                         /**
-                         * This field shall contain a credential structure that contains the CredentialTypeEnum and the credential
-                         * index (if applicable or 0 if not) to set.
+                         * This field shall contain a credential structure that contains the CredentialTypeEnum and the credential index
+                         * (if applicable or 0 if not) to set.
                          *
                          * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.36.2
                          */
@@ -5726,9 +5734,9 @@ export declare namespace DoorLock {
                          */
                         credentialData: import("../tlv/TlvObject.js").FieldType<Uint8Array<ArrayBufferLike>>;
                         /**
-                         * This field shall indicate the user index to the user record that corresponds to the credential being added
-                         * or modified. This shall be null if OperationType is add and a new credential and user is being added at the
-                         * same time.
+                         * This field shall indicate the user index to the user record that corresponds to the credential being added or
+                         * modified. This shall be null if OperationType is add and a new credential and user is being added at the same
+                         * time.
                          *
                          * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.36.4
                          */
@@ -5795,10 +5803,10 @@ export declare namespace DoorLock {
                         userIndex: import("../tlv/TlvObject.js").FieldType<number | null>;
                         /**
                          * This field shall indicate the next available index in the database for the credential type set, which is
-                         * useful for quickly identifying available credential slots in the database. This shall NOT be null if there
-                         * is at least one available entry after the requested credential index in the corresponding database and shall
-                         * be null if there are no more available entries. The NextCredentialIndex reported shall NOT exceed the
-                         * maximum number of credentials for a particular credential type.
+                         * useful for quickly identifying available credential slots in the database. This shall NOT be null if there is
+                         * at least one available entry after the requested credential index in the corresponding database and shall be
+                         * null if there are no more available entries. The NextCredentialIndex reported shall NOT exceed the maximum
+                         * number of credentials for a particular credential type.
                          *
                          * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.37.3
                          */
@@ -5814,8 +5822,8 @@ export declare namespace DoorLock {
                      */
                     readonly getCredentialStatus: Command<import("../tlv/TlvObject.js").TypeFromFields<{
                         /**
-                         * This field shall contain a credential structure that contains the CredentialTypeEnum and the credential
-                         * index (if applicable or 0 if not) to retrieve the status for.
+                         * This field shall contain a credential structure that contains the CredentialTypeEnum and the credential index
+                         * (if applicable or 0 if not) to retrieve the status for.
                          *
                          * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.38.1
                          */
@@ -5870,9 +5878,9 @@ export declare namespace DoorLock {
                          */
                         lastModifiedFabricIndex: import("../tlv/TlvObject.js").FieldType<import("../datatype/FabricIndex.js").FabricIndex | null>;
                         /**
-                         * This field shall indicate the next occupied index in the database for the credential type requested, which
-                         * is useful for quickly identifying occupied credential slots in the database. This shall NOT be null if there
-                         * is at least one occupied entry after the requested credential index in the corresponding
+                         * This field shall indicate the next occupied index in the database for the credential type requested, which is
+                         * useful for quickly identifying occupied credential slots in the database. This shall NOT be null if there is
+                         * at least one occupied entry after the requested credential index in the corresponding
                          *
                          * database and shall be null if there are no more occupied entries. The NextCredentialIndex reported shall NOT
                          * exceed the maximum number of credentials for a particular credential type.
@@ -5916,9 +5924,9 @@ export declare namespace DoorLock {
                      */
                     readonly clearCredential: Command<import("../tlv/TlvObject.js").TypeFromFields<{
                         /**
-                         * This field shall contain a credential structure that contains the CredentialTypeEnum and the credential
-                         * index (0xFFFE for all credentials or 0 if not applicable) to clear. This shall be null if clearing all
-                         * credential types otherwise it shall NOT be null.
+                         * This field shall contain a credential structure that contains the CredentialTypeEnum and the credential index
+                         * (0xFFFE for all credentials or 0 if not applicable) to clear. This shall be null if clearing all credential
+                         * types otherwise it shall NOT be null.
                          *
                          * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.40.1
                          */
@@ -5967,9 +5975,9 @@ export declare namespace DoorLock {
                          */
                         operationSource: import("../tlv/TlvObject.js").FieldType<OperationSource>;
                         /**
-                         * This field shall indicate the lock UserIndex associated with the change (if any). This shall be null if
-                         * there is no specific user associated with the data operation. This shall be 0xFFFE if all users are affected
-                         * (e.g. Clear Users).
+                         * This field shall indicate the lock UserIndex associated with the change (if any). This shall be null if there
+                         * is no specific user associated with the data operation. This shall be 0xFFFE if all users are affected (e.g.
+                         * Clear Users).
                          *
                          * @see {@link MatterSpecification.v13.Cluster} § 5.2.11.5.4
                          */
@@ -5991,10 +5999,10 @@ export declare namespace DoorLock {
                          */
                         sourceNode: import("../tlv/TlvObject.js").FieldType<import("../datatype/NodeId.js").NodeId | null>;
                         /**
-                         * This field shall indicate the index of the specific item that was changed (e.g. schedule, PIN, RFID, etc.)
-                         * in the list of items identified by LockDataType. This shall be null if the LockDataType does not correspond
-                         * to a list that can be indexed into (e.g. ProgrammingUser). This shall be 0xFFFE if all indices are affected
-                         * (e.g. ClearPINCode, ClearRFIDCode, ClearWeekDaySchedule, ClearYearDaySchedule, etc.).
+                         * This field shall indicate the index of the specific item that was changed (e.g. schedule, PIN, RFID, etc.) in
+                         * the list of items identified by LockDataType. This shall be null if the LockDataType does not correspond to a
+                         * list that can be indexed into (e.g. ProgrammingUser). This shall be 0xFFFE if all indices are affected (e.g.
+                         * ClearPINCode, ClearRFIDCode, ClearWeekDaySchedule, ClearYearDaySchedule, etc.).
                          *
                          * @see {@link MatterSpecification.v13.Cluster} § 5.2.11.5.7
                          */
@@ -6381,8 +6389,8 @@ export declare namespace DoorLock {
                         /**
                          * This field shall indicate the ending time for the Year Day schedule in Epoch Time in Seconds with local time
                          * offset based on the local timezone and DST offset on the day represented by the value. LocalEndTime shall be
-                         * greater than LocalStartTime. This shall be null if the schedule is not set for the YearDayIndex and
-                         * UserIndex provided.
+                         * greater than LocalStartTime. This shall be null if the schedule is not set for the YearDayIndex and UserIndex
+                         * provided.
                          *
                          * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.18.5
                          */
@@ -6496,9 +6504,9 @@ export declare namespace DoorLock {
                          */
                         status: import("../tlv/TlvObject.js").FieldType<Status>;
                         /**
-                         * This field shall indicate the starting time for the Holiday schedule in Epoch Time in Seconds with local
-                         * time offset based on the local timezone and DST offset on the day represented by the value. This shall be
-                         * null if the schedule is not set for the HolidayIndex provided.
+                         * This field shall indicate the starting time for the Holiday schedule in Epoch Time in Seconds with local time
+                         * offset based on the local timezone and DST offset on the day represented by the value. This shall be null if
+                         * the schedule is not set for the HolidayIndex provided.
                          *
                          * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.22.3
                          */
@@ -6556,10 +6564,10 @@ export declare namespace DoorLock {
                      */
                     readonly wrongCodeEntryLimit: WritableAttribute<number, any>;
                     /**
-                     * Indicates the number of seconds that the lock shuts down following wrong code entry. Valid range is
-                     * 1-255 seconds. Device can shut down to lock user out for specified amount of time. (Makes it difficult
-                     * to try and guess a PIN for the device.) If the attribute accepts writes and an attempt to write the
-                     * attribute to 0 is made, the device shall respond with CONSTRAINT_ERROR.
+                     * Indicates the number of seconds that the lock shuts down following wrong code entry. Valid range is 1-255
+                     * seconds. Device can shut down to lock user out for specified amount of time. (Makes it difficult to try
+                     * and guess a PIN for the device.) If the attribute accepts writes and an attempt to write the attribute to
+                     * 0 is made, the device shall respond with CONSTRAINT_ERROR.
                      *
                      * @see {@link MatterSpecification.v13.Cluster} § 5.2.9.33
                      */
@@ -6588,10 +6596,10 @@ export declare namespace DoorLock {
                      */
                     readonly wrongCodeEntryLimit: WritableAttribute<number, any>;
                     /**
-                     * Indicates the number of seconds that the lock shuts down following wrong code entry. Valid range is
-                     * 1-255 seconds. Device can shut down to lock user out for specified amount of time. (Makes it difficult
-                     * to try and guess a PIN for the device.) If the attribute accepts writes and an attempt to write the
-                     * attribute to 0 is made, the device shall respond with CONSTRAINT_ERROR.
+                     * Indicates the number of seconds that the lock shuts down following wrong code entry. Valid range is 1-255
+                     * seconds. Device can shut down to lock user out for specified amount of time. (Makes it difficult to try
+                     * and guess a PIN for the device.) If the attribute accepts writes and an attempt to write the attribute to
+                     * 0 is made, the device shall respond with CONSTRAINT_ERROR.
                      *
                      * @see {@link MatterSpecification.v13.Cluster} § 5.2.9.33
                      */
@@ -6638,8 +6646,8 @@ export declare namespace DoorLock {
                          */
                         userId: import("../tlv/TlvObject.js").FieldType<number>;
                         /**
-                         * This field shall indicate the user status. Only the values 1 (Occupied/Enabled) and 3 (Occupied/Disabled)
-                         * are allowed for UserStatus.
+                         * This field shall indicate the user status. Only the values 1 (Occupied/Enabled) and 3 (Occupied/Disabled) are
+                         * allowed for UserStatus.
                          *
                          * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.4.2
                          */
@@ -6812,8 +6820,8 @@ export declare namespace DoorLock {
                      * NOTE
                      *
                      * Using this command will revoke the ability of all existing Aliro user devices that have the old
-                     * verification key to interact with the lock. This effect is not restricted to a single fabric or
-                     * otherwise scoped in any way.
+                     * verification key to interact with the lock. This effect is not restricted to a single fabric or otherwise
+                     * scoped in any way.
                      *
                      * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.43
                      */
@@ -7102,9 +7110,9 @@ export declare namespace DoorLock {
                  * If the User Feature is also supported then any PIN Code stored in the lock shall be associated with a
                  * User.
                  *
-                 * A lock may support multiple credential types so if the User feature is supported the UserType,
-                 * UserStatus and Schedules are all associated with a User index and not directly with a PIN index. A User
-                 * index may have several credentials associated with it.
+                 * A lock may support multiple credential types so if the User feature is supported the UserType, UserStatus
+                 * and Schedules are all associated with a User index and not directly with a PIN index. A User index may
+                 * have several credentials associated with it.
                  *
                  * @see {@link MatterSpecification.v13.Cluster} § 5.2.4.1
                  */
@@ -7115,9 +7123,9 @@ export declare namespace DoorLock {
                  * If the User Feature is also supported then any RFID credential stored in the lock shall be associated
                  * with a User.
                  *
-                 * A lock may support multiple credential types so if the User feature is supported the UserType,
-                 * UserStatus and Schedules are all associated with a User index and not directly with a RFID index. A User
-                 * Index may have several credentials associated with it.
+                 * A lock may support multiple credential types so if the User feature is supported the UserType, UserStatus
+                 * and Schedules are all associated with a User index and not directly with a RFID index. A User Index may
+                 * have several credentials associated with it.
                  *
                  * @see {@link MatterSpecification.v13.Cluster} § 5.2.4.2
                  */
@@ -7130,9 +7138,9 @@ export declare namespace DoorLock {
                  * credentials. If the Users feature is also supported then the User that a fingerprint/finger vein is
                  * associated with can also have its UserType, UserStatus and Schedule modified.
                  *
-                 * A lock may support multiple credential types so if the User feature is supported the UserType,
-                 * UserStatus and Schedules are all associated with a User index and not directly with a Finger index. A
-                 * User Index may have several credentials associated with it.
+                 * A lock may support multiple credential types so if the User feature is supported the UserType, UserStatus
+                 * and Schedules are all associated with a User index and not directly with a Finger index. A User Index may
+                 * have several credentials associated with it.
                  *
                  * @see {@link MatterSpecification.v13.Cluster} § 5.2.4.3
                  */
@@ -7171,8 +7179,8 @@ export declare namespace DoorLock {
                  * recognition, iris, or retina credential is associated with can also have its UserType, UserStatus and
                  * Schedule modified.
                  *
-                 * A lock may support multiple credential types so if the User feature is supported the UserType,
-                 * UserStatus and Schedules are all associated with a User and not directly with a credential.
+                 * A lock may support multiple credential types so if the User feature is supported the UserType, UserStatus
+                 * and Schedules are all associated with a User and not directly with a credential.
                  *
                  * @see {@link MatterSpecification.v13.Cluster} § 5.2.4.6
                  */
@@ -7201,8 +7209,8 @@ export declare namespace DoorLock {
                 /**
                  * YearDayAccessSchedules
                  *
-                 * If the User feature is supported then Year Day Schedules are applied to a User and not a credential.
-                 * Year Day Schedules are used to restrict access to a specified date and time window.
+                 * If the User feature is supported then Year Day Schedules are applied to a User and not a credential. Year
+                 * Day Schedules are used to restrict access to a specified date and time window.
                  *
                  * The lock may automatically adjust the UserType when a schedule is created or cleared.
                  *
@@ -7227,10 +7235,10 @@ export declare namespace DoorLock {
                  * Unbolting
                  *
                  * Locks that support this feature differentiate between unbolting and unlocking. The Unbolt Door command
-                 * retracts the bolt without pulling the latch. The Unlock Door command fully unlocks the door by
-                 * retracting the bolt and briefly pulling the latch. While the latch is pulled, the lock state changes to
-                 * Unlatched. Locks without unbolting support don’t differentiate between unbolting and unlocking and
-                 * perform the same operation for both commands.
+                 * retracts the bolt without pulling the latch. The Unlock Door command fully unlocks the door by retracting
+                 * the bolt and briefly pulling the latch. While the latch is pulled, the lock state changes to Unlatched.
+                 * Locks without unbolting support don’t differentiate between unbolting and unlocking and perform the same
+                 * operation for both commands.
                  *
                  * @see {@link MatterSpecification.v13.Cluster} § 5.2.4.11
                  */
@@ -7257,8 +7265,8 @@ export declare namespace DoorLock {
             readonly attributes: {
                 /**
                  * This attribute may be NULL if the lock hardware does not currently know the status of the locking
-                 * mechanism. For example, a lock may not know the LockState status after a power cycle until the first
-                 * lock actuation is completed.
+                 * mechanism. For example, a lock may not know the LockState status after a power cycle until the first lock
+                 * actuation is completed.
                  *
                  * The Not Fully Locked value is used by a lock to indicate that the state of the lock is somewhere between
                  * Locked and Unlocked so it is only partially secured. For example, a deadbolt could be partially extended
@@ -7295,8 +7303,8 @@ export declare namespace DoorLock {
                 readonly ledSettings: OptionalWritableAttribute<LedSetting, any>;
                 /**
                  * Indicates the number of seconds to wait after unlocking a lock before it automatically locks again.
-                 * 0=disabled. If set, unlock operations from any source will be timed. For one time unlock with timeout
-                 * use the specific command.
+                 * 0=disabled. If set, unlock operations from any source will be timed. For one time unlock with timeout use
+                 * the specific command.
                  *
                  * @see {@link MatterSpecification.v13.Cluster} § 5.2.9.22
                  */
@@ -7314,33 +7322,37 @@ export declare namespace DoorLock {
                  */
                 readonly operatingMode: WritableAttribute<OperatingMode, any>;
                 /**
-                 * This attribute shall contain a bitmap with all operating bits of the OperatingMode attribute supported
-                 * by the lock. All operating modes NOT supported by a lock shall be set to one. The value of the
-                 * OperatingMode enumeration defines the related bit to be set.
+                 * This attribute shall contain a bitmap with all operating bits of the OperatingMode attribute supported by
+                 * the lock. All operating modes NOT supported by a lock shall be set to one. The value of the OperatingMode
+                 * enumeration defines the related bit to be set.
                  *
                  * @see {@link MatterSpecification.v13.Cluster} § 5.2.9.25
                  */
                 readonly supportedOperatingModes: FixedAttribute<import("../schema/BitmapSchema.js").TypeFromPartialBitSchema<{
                     /**
-                     * Normal operation mode
+                     * Normal operation mode is NOT supported
                      */
                     normal: BitFlag;
                     /**
-                     * Vacation operation mode
+                     * Vacation operation mode is NOT supported
                      */
                     vacation: BitFlag;
                     /**
-                     * Privacy operation mode
+                     * Privacy operation mode is NOT supported
                      */
                     privacy: BitFlag;
                     /**
-                     * No remote lock and unlock operation mode
+                     * No remote lock and unlock operation mode is NOT supported
                      */
                     noRemoteLockUnlock: BitFlag;
                     /**
-                     * Passage operation mode
+                     * Passage operation mode is NOT supported
                      */
                     passage: BitFlag;
+                    /**
+                     * This needs always be set because this bitmap is inverse.!
+                     */
+                    alwaysSet: BitField;
                 }>, any>;
                 /**
                  * Indicates the default configurations as they are physically set on the device (example: hardware dip
@@ -7440,9 +7452,9 @@ export declare namespace DoorLock {
                 /**
                  * This attribute shall enable/disable local programming on the door lock of certain features (see
                  * LocalProgrammingFeatures attribute). If this value is set to TRUE then local programming is enabled on
-                 * the door lock for all features. If it is set to FALSE then local programming is disabled on the door
-                 * lock for those features whose bit is set to 0 in the LocalProgrammingFeatures attribute. Local
-                 * programming shall be enabled by default.
+                 * the door lock for all features. If it is set to FALSE then local programming is disabled on the door lock
+                 * for those features whose bit is set to 0 in the LocalProgrammingFeatures attribute. Local programming
+                 * shall be enabled by default.
                  *
                  * @see {@link MatterSpecification.v13.Cluster} § 5.2.9.27
                  */
@@ -7530,10 +7542,10 @@ export declare namespace DoorLock {
                     adjustSettings: BitFlag;
                 }>, any>;
                 /**
-                 * This attribute is only supported if the Alarms cluster is on the same endpoint. The alarm mask is used
-                 * to turn on/off alarms for particular functions. Alarms for an alarm group are enabled if the associated
-                 * alarm mask bit is set. Each bit represents a group of alarms. Entire alarm groups can be turned on or
-                 * off by setting or clearing the associated bit in the alarm mask.
+                 * This attribute is only supported if the Alarms cluster is on the same endpoint. The alarm mask is used to
+                 * turn on/off alarms for particular functions. Alarms for an alarm group are enabled if the associated
+                 * alarm mask bit is set. Each bit represents a group of alarms. Entire alarm groups can be turned on or off
+                 * by setting or clearing the associated bit in the alarm mask.
                  *
                  * This mask DOES NOT apply to the Events mechanism of this cluster.
                  *
@@ -7579,8 +7591,8 @@ export declare namespace DoorLock {
                      * If the RequirePINforRemoteOperation attribute is True then PINCode field shall be provided and the door lock
                      * shall NOT grant access if it is not provided.
                      *
-                     * If the PINCode field is provided, the door lock shall verify PINCode before granting access regardless of
-                     * the value of RequirePINForRemoteOperation attribute.
+                     * If the PINCode field is provided, the door lock shall verify PINCode before granting access regardless of the
+                     * value of RequirePINForRemoteOperation attribute.
                      *
                      * When the PINCode field is provided an invalid PIN will count towards the WrongCodeEntryLimit and the
                      * UserCodeTemporaryDisableTime will be triggered if the WrongCodeEntryLimit is exceeded. The lock shall ignore
@@ -7637,8 +7649,8 @@ export declare namespace DoorLock {
             };
             readonly events: {
                 /**
-                 * The door lock server provides several alarms which can be sent when there is a critical state on the
-                 * door lock. The alarms available for the door lock server are listed in AlarmCodeEnum.
+                 * The door lock server provides several alarms which can be sent when there is a critical state on the door
+                 * lock. The alarms available for the door lock server are listed in AlarmCodeEnum.
                  *
                  * @see {@link MatterSpecification.v13.Cluster} § 5.2.11.1
                  */
@@ -7766,8 +7778,8 @@ export declare namespace DoorLock {
                      */
                     operationError: import("../tlv/TlvObject.js").FieldType<OperationError>;
                     /**
-                     * This field shall indicate the lock UserIndex who performed the lock operation. This shall be null if there
-                     * is no user id that can be determined for the given operation source.
+                     * This field shall indicate the lock UserIndex who performed the lock operation. This shall be null if there is
+                     * no user id that can be determined for the given operation source.
                      *
                      * @see {@link MatterSpecification.v13.Cluster} § 5.2.11.4.4
                      */
@@ -7878,8 +7890,8 @@ export declare namespace DoorLock {
                          */
                         readonly numberOfTotalUsersSupported: FixedAttribute<number, any>;
                         /**
-                         * This attribute shall contain a bitmap with the bits set for the values of CredentialRuleEnum supported
-                         * on this device.
+                         * This attribute shall contain a bitmap with the bits set for the values of CredentialRuleEnum supported on
+                         * this device.
                          *
                          * @see {@link MatterSpecification.v13.Cluster} § 5.2.9.18
                          */
@@ -7900,8 +7912,8 @@ export declare namespace DoorLock {
                         /**
                          * Indicates the number of credentials that could be assigned for each user.
                          *
-                         * Depending on the value of NumberOfRFIDUsersSupported and NumberOfPINUsersSupported it may not be
-                         * possible to assign that number of credentials for a user.
+                         * Depending on the value of NumberOfRFIDUsersSupported and NumberOfPINUsersSupported it may not be possible
+                         * to assign that number of credentials for a user.
                          *
                          * For example, if the device supports only PIN and RFID credential types,
                          * NumberOfCredentialsSupportedPerUser is set to 10, NumberOfPINUsersSupported is set to 5 and
@@ -7913,8 +7925,8 @@ export declare namespace DoorLock {
                         readonly numberOfCredentialsSupportedPerUser: FixedAttribute<number, any>;
                         /**
                          * Indicates the number of minutes a PIN, RFID, Fingerprint, or other credential associated with a user of
-                         * type ExpiringUser shall remain valid after its first use before expiring. When the credential expires
-                         * the UserStatus for the corresponding user record shall be set to OccupiedDisabled.
+                         * type ExpiringUser shall remain valid after its first use before expiring. When the credential expires the
+                         * UserStatus for the corresponding user record shall be set to OccupiedDisabled.
                          *
                          * @see {@link MatterSpecification.v13.Cluster} § 5.2.9.36
                          */
@@ -7977,8 +7989,8 @@ export declare namespace DoorLock {
                              *   • If the OperationType is Add, the UserUniqueID in the resulting user record shall be set to default value
                              *     specified above.
                              *
-                             *   • If the OperationType is Modify, the UserUniqueID in the user record shall NOT be changed from the
-                             *     current value.
+                             *   • If the OperationType is Modify, the UserUniqueID in the user record shall NOT be changed from the current
+                             *     value.
                              *
                              * If UserUniqueID is not null, the UserUniqueID in the user record shall be set to the provided value.
                              *
@@ -8018,8 +8030,8 @@ export declare namespace DoorLock {
                             /**
                              * This field shall indicate the CredentialRule to use for this user.
                              *
-                             * The valid CredentialRule enumeration values depends on the bits in the CredentialRulesBitmap map. Each bit
-                             * in the map identifies a valid CredentialRule that can be used.
+                             * The valid CredentialRule enumeration values depends on the bits in the CredentialRulesBitmap map. Each bit in
+                             * the map identifies a valid CredentialRule that can be used.
                              *
                              * If CredentialRule is null then:
                              *
@@ -8124,10 +8136,9 @@ export declare namespace DoorLock {
                              */
                             lastModifiedFabricIndex: import("../tlv/TlvObject.js").FieldType<import("../datatype/FabricIndex.js").FabricIndex | null>;
                             /**
-                             * This field shall indicate the next occupied UserIndex in the database which is useful for quickly
-                             * identifying occupied user slots in the database. This shall NOT be null if there is at least one occupied
-                             * entry after the requested UserIndex in the User database and shall be null if there are no more occupied
-                             * entries.
+                             * This field shall indicate the next occupied UserIndex in the database which is useful for quickly identifying
+                             * occupied user slots in the database. This shall NOT be null if there is at least one occupied entry after the
+                             * requested UserIndex in the User database and shall be null if there are no more occupied entries.
                              *
                              * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.34.10
                              */
@@ -8168,8 +8179,8 @@ export declare namespace DoorLock {
                              */
                             operationType: import("../tlv/TlvObject.js").FieldType<DataOperationType>;
                             /**
-                             * This field shall contain a credential structure that contains the CredentialTypeEnum and the credential
-                             * index (if applicable or 0 if not) to set.
+                             * This field shall contain a credential structure that contains the CredentialTypeEnum and the credential index
+                             * (if applicable or 0 if not) to set.
                              *
                              * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.36.2
                              */
@@ -8198,9 +8209,9 @@ export declare namespace DoorLock {
                              */
                             credentialData: import("../tlv/TlvObject.js").FieldType<Uint8Array<ArrayBufferLike>>;
                             /**
-                             * This field shall indicate the user index to the user record that corresponds to the credential being added
-                             * or modified. This shall be null if OperationType is add and a new credential and user is being added at the
-                             * same time.
+                             * This field shall indicate the user index to the user record that corresponds to the credential being added or
+                             * modified. This shall be null if OperationType is add and a new credential and user is being added at the same
+                             * time.
                              *
                              * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.36.4
                              */
@@ -8267,10 +8278,10 @@ export declare namespace DoorLock {
                             userIndex: import("../tlv/TlvObject.js").FieldType<number | null>;
                             /**
                              * This field shall indicate the next available index in the database for the credential type set, which is
-                             * useful for quickly identifying available credential slots in the database. This shall NOT be null if there
-                             * is at least one available entry after the requested credential index in the corresponding database and shall
-                             * be null if there are no more available entries. The NextCredentialIndex reported shall NOT exceed the
-                             * maximum number of credentials for a particular credential type.
+                             * useful for quickly identifying available credential slots in the database. This shall NOT be null if there is
+                             * at least one available entry after the requested credential index in the corresponding database and shall be
+                             * null if there are no more available entries. The NextCredentialIndex reported shall NOT exceed the maximum
+                             * number of credentials for a particular credential type.
                              *
                              * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.37.3
                              */
@@ -8286,8 +8297,8 @@ export declare namespace DoorLock {
                          */
                         readonly getCredentialStatus: Command<import("../tlv/TlvObject.js").TypeFromFields<{
                             /**
-                             * This field shall contain a credential structure that contains the CredentialTypeEnum and the credential
-                             * index (if applicable or 0 if not) to retrieve the status for.
+                             * This field shall contain a credential structure that contains the CredentialTypeEnum and the credential index
+                             * (if applicable or 0 if not) to retrieve the status for.
                              *
                              * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.38.1
                              */
@@ -8342,9 +8353,9 @@ export declare namespace DoorLock {
                              */
                             lastModifiedFabricIndex: import("../tlv/TlvObject.js").FieldType<import("../datatype/FabricIndex.js").FabricIndex | null>;
                             /**
-                             * This field shall indicate the next occupied index in the database for the credential type requested, which
-                             * is useful for quickly identifying occupied credential slots in the database. This shall NOT be null if there
-                             * is at least one occupied entry after the requested credential index in the corresponding
+                             * This field shall indicate the next occupied index in the database for the credential type requested, which is
+                             * useful for quickly identifying occupied credential slots in the database. This shall NOT be null if there is
+                             * at least one occupied entry after the requested credential index in the corresponding
                              *
                              * database and shall be null if there are no more occupied entries. The NextCredentialIndex reported shall NOT
                              * exceed the maximum number of credentials for a particular credential type.
@@ -8388,9 +8399,9 @@ export declare namespace DoorLock {
                          */
                         readonly clearCredential: Command<import("../tlv/TlvObject.js").TypeFromFields<{
                             /**
-                             * This field shall contain a credential structure that contains the CredentialTypeEnum and the credential
-                             * index (0xFFFE for all credentials or 0 if not applicable) to clear. This shall be null if clearing all
-                             * credential types otherwise it shall NOT be null.
+                             * This field shall contain a credential structure that contains the CredentialTypeEnum and the credential index
+                             * (0xFFFE for all credentials or 0 if not applicable) to clear. This shall be null if clearing all credential
+                             * types otherwise it shall NOT be null.
                              *
                              * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.40.1
                              */
@@ -8439,9 +8450,9 @@ export declare namespace DoorLock {
                              */
                             operationSource: import("../tlv/TlvObject.js").FieldType<OperationSource>;
                             /**
-                             * This field shall indicate the lock UserIndex associated with the change (if any). This shall be null if
-                             * there is no specific user associated with the data operation. This shall be 0xFFFE if all users are affected
-                             * (e.g. Clear Users).
+                             * This field shall indicate the lock UserIndex associated with the change (if any). This shall be null if there
+                             * is no specific user associated with the data operation. This shall be 0xFFFE if all users are affected (e.g.
+                             * Clear Users).
                              *
                              * @see {@link MatterSpecification.v13.Cluster} § 5.2.11.5.4
                              */
@@ -8463,10 +8474,10 @@ export declare namespace DoorLock {
                              */
                             sourceNode: import("../tlv/TlvObject.js").FieldType<import("../datatype/NodeId.js").NodeId | null>;
                             /**
-                             * This field shall indicate the index of the specific item that was changed (e.g. schedule, PIN, RFID, etc.)
-                             * in the list of items identified by LockDataType. This shall be null if the LockDataType does not correspond
-                             * to a list that can be indexed into (e.g. ProgrammingUser). This shall be 0xFFFE if all indices are affected
-                             * (e.g. ClearPINCode, ClearRFIDCode, ClearWeekDaySchedule, ClearYearDaySchedule, etc.).
+                             * This field shall indicate the index of the specific item that was changed (e.g. schedule, PIN, RFID, etc.) in
+                             * the list of items identified by LockDataType. This shall be null if the LockDataType does not correspond to a
+                             * list that can be indexed into (e.g. ProgrammingUser). This shall be 0xFFFE if all indices are affected (e.g.
+                             * ClearPINCode, ClearRFIDCode, ClearWeekDaySchedule, ClearYearDaySchedule, etc.).
                              *
                              * @see {@link MatterSpecification.v13.Cluster} § 5.2.11.5.7
                              */
@@ -8853,8 +8864,8 @@ export declare namespace DoorLock {
                             /**
                              * This field shall indicate the ending time for the Year Day schedule in Epoch Time in Seconds with local time
                              * offset based on the local timezone and DST offset on the day represented by the value. LocalEndTime shall be
-                             * greater than LocalStartTime. This shall be null if the schedule is not set for the YearDayIndex and
-                             * UserIndex provided.
+                             * greater than LocalStartTime. This shall be null if the schedule is not set for the YearDayIndex and UserIndex
+                             * provided.
                              *
                              * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.18.5
                              */
@@ -8968,9 +8979,9 @@ export declare namespace DoorLock {
                              */
                             status: import("../tlv/TlvObject.js").FieldType<Status>;
                             /**
-                             * This field shall indicate the starting time for the Holiday schedule in Epoch Time in Seconds with local
-                             * time offset based on the local timezone and DST offset on the day represented by the value. This shall be
-                             * null if the schedule is not set for the HolidayIndex provided.
+                             * This field shall indicate the starting time for the Holiday schedule in Epoch Time in Seconds with local time
+                             * offset based on the local timezone and DST offset on the day represented by the value. This shall be null if
+                             * the schedule is not set for the HolidayIndex provided.
                              *
                              * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.22.3
                              */
@@ -9028,10 +9039,10 @@ export declare namespace DoorLock {
                          */
                         readonly wrongCodeEntryLimit: WritableAttribute<number, any>;
                         /**
-                         * Indicates the number of seconds that the lock shuts down following wrong code entry. Valid range is
-                         * 1-255 seconds. Device can shut down to lock user out for specified amount of time. (Makes it difficult
-                         * to try and guess a PIN for the device.) If the attribute accepts writes and an attempt to write the
-                         * attribute to 0 is made, the device shall respond with CONSTRAINT_ERROR.
+                         * Indicates the number of seconds that the lock shuts down following wrong code entry. Valid range is 1-255
+                         * seconds. Device can shut down to lock user out for specified amount of time. (Makes it difficult to try
+                         * and guess a PIN for the device.) If the attribute accepts writes and an attempt to write the attribute to
+                         * 0 is made, the device shall respond with CONSTRAINT_ERROR.
                          *
                          * @see {@link MatterSpecification.v13.Cluster} § 5.2.9.33
                          */
@@ -9060,10 +9071,10 @@ export declare namespace DoorLock {
                          */
                         readonly wrongCodeEntryLimit: WritableAttribute<number, any>;
                         /**
-                         * Indicates the number of seconds that the lock shuts down following wrong code entry. Valid range is
-                         * 1-255 seconds. Device can shut down to lock user out for specified amount of time. (Makes it difficult
-                         * to try and guess a PIN for the device.) If the attribute accepts writes and an attempt to write the
-                         * attribute to 0 is made, the device shall respond with CONSTRAINT_ERROR.
+                         * Indicates the number of seconds that the lock shuts down following wrong code entry. Valid range is 1-255
+                         * seconds. Device can shut down to lock user out for specified amount of time. (Makes it difficult to try
+                         * and guess a PIN for the device.) If the attribute accepts writes and an attempt to write the attribute to
+                         * 0 is made, the device shall respond with CONSTRAINT_ERROR.
                          *
                          * @see {@link MatterSpecification.v13.Cluster} § 5.2.9.33
                          */
@@ -9110,8 +9121,8 @@ export declare namespace DoorLock {
                              */
                             userId: import("../tlv/TlvObject.js").FieldType<number>;
                             /**
-                             * This field shall indicate the user status. Only the values 1 (Occupied/Enabled) and 3 (Occupied/Disabled)
-                             * are allowed for UserStatus.
+                             * This field shall indicate the user status. Only the values 1 (Occupied/Enabled) and 3 (Occupied/Disabled) are
+                             * allowed for UserStatus.
                              *
                              * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.4.2
                              */
@@ -9284,8 +9295,8 @@ export declare namespace DoorLock {
                          * NOTE
                          *
                          * Using this command will revoke the ability of all existing Aliro user devices that have the old
-                         * verification key to interact with the lock. This effect is not restricted to a single fabric or
-                         * otherwise scoped in any way.
+                         * verification key to interact with the lock. This effect is not restricted to a single fabric or otherwise
+                         * scoped in any way.
                          *
                          * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.43
                          */
@@ -9569,9 +9580,9 @@ export declare namespace DoorLock {
              * If the User Feature is also supported then any PIN Code stored in the lock shall be associated with a
              * User.
              *
-             * A lock may support multiple credential types so if the User feature is supported the UserType,
-             * UserStatus and Schedules are all associated with a User index and not directly with a PIN index. A User
-             * index may have several credentials associated with it.
+             * A lock may support multiple credential types so if the User feature is supported the UserType, UserStatus
+             * and Schedules are all associated with a User index and not directly with a PIN index. A User index may
+             * have several credentials associated with it.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 5.2.4.1
              */
@@ -9582,9 +9593,9 @@ export declare namespace DoorLock {
              * If the User Feature is also supported then any RFID credential stored in the lock shall be associated
              * with a User.
              *
-             * A lock may support multiple credential types so if the User feature is supported the UserType,
-             * UserStatus and Schedules are all associated with a User index and not directly with a RFID index. A User
-             * Index may have several credentials associated with it.
+             * A lock may support multiple credential types so if the User feature is supported the UserType, UserStatus
+             * and Schedules are all associated with a User index and not directly with a RFID index. A User Index may
+             * have several credentials associated with it.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 5.2.4.2
              */
@@ -9597,9 +9608,9 @@ export declare namespace DoorLock {
              * credentials. If the Users feature is also supported then the User that a fingerprint/finger vein is
              * associated with can also have its UserType, UserStatus and Schedule modified.
              *
-             * A lock may support multiple credential types so if the User feature is supported the UserType,
-             * UserStatus and Schedules are all associated with a User index and not directly with a Finger index. A
-             * User Index may have several credentials associated with it.
+             * A lock may support multiple credential types so if the User feature is supported the UserType, UserStatus
+             * and Schedules are all associated with a User index and not directly with a Finger index. A User Index may
+             * have several credentials associated with it.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 5.2.4.3
              */
@@ -9638,8 +9649,8 @@ export declare namespace DoorLock {
              * recognition, iris, or retina credential is associated with can also have its UserType, UserStatus and
              * Schedule modified.
              *
-             * A lock may support multiple credential types so if the User feature is supported the UserType,
-             * UserStatus and Schedules are all associated with a User and not directly with a credential.
+             * A lock may support multiple credential types so if the User feature is supported the UserType, UserStatus
+             * and Schedules are all associated with a User and not directly with a credential.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 5.2.4.6
              */
@@ -9668,8 +9679,8 @@ export declare namespace DoorLock {
             /**
              * YearDayAccessSchedules
              *
-             * If the User feature is supported then Year Day Schedules are applied to a User and not a credential.
-             * Year Day Schedules are used to restrict access to a specified date and time window.
+             * If the User feature is supported then Year Day Schedules are applied to a User and not a credential. Year
+             * Day Schedules are used to restrict access to a specified date and time window.
              *
              * The lock may automatically adjust the UserType when a schedule is created or cleared.
              *
@@ -9694,10 +9705,10 @@ export declare namespace DoorLock {
              * Unbolting
              *
              * Locks that support this feature differentiate between unbolting and unlocking. The Unbolt Door command
-             * retracts the bolt without pulling the latch. The Unlock Door command fully unlocks the door by
-             * retracting the bolt and briefly pulling the latch. While the latch is pulled, the lock state changes to
-             * Unlatched. Locks without unbolting support don’t differentiate between unbolting and unlocking and
-             * perform the same operation for both commands.
+             * retracts the bolt without pulling the latch. The Unlock Door command fully unlocks the door by retracting
+             * the bolt and briefly pulling the latch. While the latch is pulled, the lock state changes to Unlatched.
+             * Locks without unbolting support don’t differentiate between unbolting and unlocking and perform the same
+             * operation for both commands.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 5.2.4.11
              */
@@ -9724,8 +9735,8 @@ export declare namespace DoorLock {
         readonly attributes: {
             /**
              * This attribute may be NULL if the lock hardware does not currently know the status of the locking
-             * mechanism. For example, a lock may not know the LockState status after a power cycle until the first
-             * lock actuation is completed.
+             * mechanism. For example, a lock may not know the LockState status after a power cycle until the first lock
+             * actuation is completed.
              *
              * The Not Fully Locked value is used by a lock to indicate that the state of the lock is somewhere between
              * Locked and Unlocked so it is only partially secured. For example, a deadbolt could be partially extended
@@ -9762,8 +9773,8 @@ export declare namespace DoorLock {
             readonly ledSettings: OptionalWritableAttribute<LedSetting, any>;
             /**
              * Indicates the number of seconds to wait after unlocking a lock before it automatically locks again.
-             * 0=disabled. If set, unlock operations from any source will be timed. For one time unlock with timeout
-             * use the specific command.
+             * 0=disabled. If set, unlock operations from any source will be timed. For one time unlock with timeout use
+             * the specific command.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 5.2.9.22
              */
@@ -9781,33 +9792,37 @@ export declare namespace DoorLock {
              */
             readonly operatingMode: WritableAttribute<OperatingMode, any>;
             /**
-             * This attribute shall contain a bitmap with all operating bits of the OperatingMode attribute supported
-             * by the lock. All operating modes NOT supported by a lock shall be set to one. The value of the
-             * OperatingMode enumeration defines the related bit to be set.
+             * This attribute shall contain a bitmap with all operating bits of the OperatingMode attribute supported by
+             * the lock. All operating modes NOT supported by a lock shall be set to one. The value of the OperatingMode
+             * enumeration defines the related bit to be set.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 5.2.9.25
              */
             readonly supportedOperatingModes: FixedAttribute<import("../schema/BitmapSchema.js").TypeFromPartialBitSchema<{
                 /**
-                 * Normal operation mode
+                 * Normal operation mode is NOT supported
                  */
                 normal: BitFlag;
                 /**
-                 * Vacation operation mode
+                 * Vacation operation mode is NOT supported
                  */
                 vacation: BitFlag;
                 /**
-                 * Privacy operation mode
+                 * Privacy operation mode is NOT supported
                  */
                 privacy: BitFlag;
                 /**
-                 * No remote lock and unlock operation mode
+                 * No remote lock and unlock operation mode is NOT supported
                  */
                 noRemoteLockUnlock: BitFlag;
                 /**
-                 * Passage operation mode
+                 * Passage operation mode is NOT supported
                  */
                 passage: BitFlag;
+                /**
+                 * This needs always be set because this bitmap is inverse.!
+                 */
+                alwaysSet: BitField;
             }>, any>;
             /**
              * Indicates the default configurations as they are physically set on the device (example: hardware dip
@@ -9907,9 +9922,9 @@ export declare namespace DoorLock {
             /**
              * This attribute shall enable/disable local programming on the door lock of certain features (see
              * LocalProgrammingFeatures attribute). If this value is set to TRUE then local programming is enabled on
-             * the door lock for all features. If it is set to FALSE then local programming is disabled on the door
-             * lock for those features whose bit is set to 0 in the LocalProgrammingFeatures attribute. Local
-             * programming shall be enabled by default.
+             * the door lock for all features. If it is set to FALSE then local programming is disabled on the door lock
+             * for those features whose bit is set to 0 in the LocalProgrammingFeatures attribute. Local programming
+             * shall be enabled by default.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 5.2.9.27
              */
@@ -9997,10 +10012,10 @@ export declare namespace DoorLock {
                 adjustSettings: BitFlag;
             }>, any>;
             /**
-             * This attribute is only supported if the Alarms cluster is on the same endpoint. The alarm mask is used
-             * to turn on/off alarms for particular functions. Alarms for an alarm group are enabled if the associated
-             * alarm mask bit is set. Each bit represents a group of alarms. Entire alarm groups can be turned on or
-             * off by setting or clearing the associated bit in the alarm mask.
+             * This attribute is only supported if the Alarms cluster is on the same endpoint. The alarm mask is used to
+             * turn on/off alarms for particular functions. Alarms for an alarm group are enabled if the associated
+             * alarm mask bit is set. Each bit represents a group of alarms. Entire alarm groups can be turned on or off
+             * by setting or clearing the associated bit in the alarm mask.
              *
              * This mask DOES NOT apply to the Events mechanism of this cluster.
              *
@@ -10046,8 +10061,8 @@ export declare namespace DoorLock {
                  * If the RequirePINforRemoteOperation attribute is True then PINCode field shall be provided and the door lock
                  * shall NOT grant access if it is not provided.
                  *
-                 * If the PINCode field is provided, the door lock shall verify PINCode before granting access regardless of
-                 * the value of RequirePINForRemoteOperation attribute.
+                 * If the PINCode field is provided, the door lock shall verify PINCode before granting access regardless of the
+                 * value of RequirePINForRemoteOperation attribute.
                  *
                  * When the PINCode field is provided an invalid PIN will count towards the WrongCodeEntryLimit and the
                  * UserCodeTemporaryDisableTime will be triggered if the WrongCodeEntryLimit is exceeded. The lock shall ignore
@@ -10104,8 +10119,8 @@ export declare namespace DoorLock {
         };
         readonly events: {
             /**
-             * The door lock server provides several alarms which can be sent when there is a critical state on the
-             * door lock. The alarms available for the door lock server are listed in AlarmCodeEnum.
+             * The door lock server provides several alarms which can be sent when there is a critical state on the door
+             * lock. The alarms available for the door lock server are listed in AlarmCodeEnum.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 5.2.11.1
              */
@@ -10233,8 +10248,8 @@ export declare namespace DoorLock {
                  */
                 operationError: import("../tlv/TlvObject.js").FieldType<OperationError>;
                 /**
-                 * This field shall indicate the lock UserIndex who performed the lock operation. This shall be null if there
-                 * is no user id that can be determined for the given operation source.
+                 * This field shall indicate the lock UserIndex who performed the lock operation. This shall be null if there is
+                 * no user id that can be determined for the given operation source.
                  *
                  * @see {@link MatterSpecification.v13.Cluster} § 5.2.11.4.4
                  */
@@ -10345,8 +10360,8 @@ export declare namespace DoorLock {
                      */
                     readonly numberOfTotalUsersSupported: FixedAttribute<number, any>;
                     /**
-                     * This attribute shall contain a bitmap with the bits set for the values of CredentialRuleEnum supported
-                     * on this device.
+                     * This attribute shall contain a bitmap with the bits set for the values of CredentialRuleEnum supported on
+                     * this device.
                      *
                      * @see {@link MatterSpecification.v13.Cluster} § 5.2.9.18
                      */
@@ -10367,8 +10382,8 @@ export declare namespace DoorLock {
                     /**
                      * Indicates the number of credentials that could be assigned for each user.
                      *
-                     * Depending on the value of NumberOfRFIDUsersSupported and NumberOfPINUsersSupported it may not be
-                     * possible to assign that number of credentials for a user.
+                     * Depending on the value of NumberOfRFIDUsersSupported and NumberOfPINUsersSupported it may not be possible
+                     * to assign that number of credentials for a user.
                      *
                      * For example, if the device supports only PIN and RFID credential types,
                      * NumberOfCredentialsSupportedPerUser is set to 10, NumberOfPINUsersSupported is set to 5 and
@@ -10380,8 +10395,8 @@ export declare namespace DoorLock {
                     readonly numberOfCredentialsSupportedPerUser: FixedAttribute<number, any>;
                     /**
                      * Indicates the number of minutes a PIN, RFID, Fingerprint, or other credential associated with a user of
-                     * type ExpiringUser shall remain valid after its first use before expiring. When the credential expires
-                     * the UserStatus for the corresponding user record shall be set to OccupiedDisabled.
+                     * type ExpiringUser shall remain valid after its first use before expiring. When the credential expires the
+                     * UserStatus for the corresponding user record shall be set to OccupiedDisabled.
                      *
                      * @see {@link MatterSpecification.v13.Cluster} § 5.2.9.36
                      */
@@ -10444,8 +10459,8 @@ export declare namespace DoorLock {
                          *   • If the OperationType is Add, the UserUniqueID in the resulting user record shall be set to default value
                          *     specified above.
                          *
-                         *   • If the OperationType is Modify, the UserUniqueID in the user record shall NOT be changed from the
-                         *     current value.
+                         *   • If the OperationType is Modify, the UserUniqueID in the user record shall NOT be changed from the current
+                         *     value.
                          *
                          * If UserUniqueID is not null, the UserUniqueID in the user record shall be set to the provided value.
                          *
@@ -10485,8 +10500,8 @@ export declare namespace DoorLock {
                         /**
                          * This field shall indicate the CredentialRule to use for this user.
                          *
-                         * The valid CredentialRule enumeration values depends on the bits in the CredentialRulesBitmap map. Each bit
-                         * in the map identifies a valid CredentialRule that can be used.
+                         * The valid CredentialRule enumeration values depends on the bits in the CredentialRulesBitmap map. Each bit in
+                         * the map identifies a valid CredentialRule that can be used.
                          *
                          * If CredentialRule is null then:
                          *
@@ -10591,10 +10606,9 @@ export declare namespace DoorLock {
                          */
                         lastModifiedFabricIndex: import("../tlv/TlvObject.js").FieldType<import("../datatype/FabricIndex.js").FabricIndex | null>;
                         /**
-                         * This field shall indicate the next occupied UserIndex in the database which is useful for quickly
-                         * identifying occupied user slots in the database. This shall NOT be null if there is at least one occupied
-                         * entry after the requested UserIndex in the User database and shall be null if there are no more occupied
-                         * entries.
+                         * This field shall indicate the next occupied UserIndex in the database which is useful for quickly identifying
+                         * occupied user slots in the database. This shall NOT be null if there is at least one occupied entry after the
+                         * requested UserIndex in the User database and shall be null if there are no more occupied entries.
                          *
                          * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.34.10
                          */
@@ -10635,8 +10649,8 @@ export declare namespace DoorLock {
                          */
                         operationType: import("../tlv/TlvObject.js").FieldType<DataOperationType>;
                         /**
-                         * This field shall contain a credential structure that contains the CredentialTypeEnum and the credential
-                         * index (if applicable or 0 if not) to set.
+                         * This field shall contain a credential structure that contains the CredentialTypeEnum and the credential index
+                         * (if applicable or 0 if not) to set.
                          *
                          * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.36.2
                          */
@@ -10665,9 +10679,9 @@ export declare namespace DoorLock {
                          */
                         credentialData: import("../tlv/TlvObject.js").FieldType<Uint8Array<ArrayBufferLike>>;
                         /**
-                         * This field shall indicate the user index to the user record that corresponds to the credential being added
-                         * or modified. This shall be null if OperationType is add and a new credential and user is being added at the
-                         * same time.
+                         * This field shall indicate the user index to the user record that corresponds to the credential being added or
+                         * modified. This shall be null if OperationType is add and a new credential and user is being added at the same
+                         * time.
                          *
                          * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.36.4
                          */
@@ -10734,10 +10748,10 @@ export declare namespace DoorLock {
                         userIndex: import("../tlv/TlvObject.js").FieldType<number | null>;
                         /**
                          * This field shall indicate the next available index in the database for the credential type set, which is
-                         * useful for quickly identifying available credential slots in the database. This shall NOT be null if there
-                         * is at least one available entry after the requested credential index in the corresponding database and shall
-                         * be null if there are no more available entries. The NextCredentialIndex reported shall NOT exceed the
-                         * maximum number of credentials for a particular credential type.
+                         * useful for quickly identifying available credential slots in the database. This shall NOT be null if there is
+                         * at least one available entry after the requested credential index in the corresponding database and shall be
+                         * null if there are no more available entries. The NextCredentialIndex reported shall NOT exceed the maximum
+                         * number of credentials for a particular credential type.
                          *
                          * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.37.3
                          */
@@ -10753,8 +10767,8 @@ export declare namespace DoorLock {
                      */
                     readonly getCredentialStatus: Command<import("../tlv/TlvObject.js").TypeFromFields<{
                         /**
-                         * This field shall contain a credential structure that contains the CredentialTypeEnum and the credential
-                         * index (if applicable or 0 if not) to retrieve the status for.
+                         * This field shall contain a credential structure that contains the CredentialTypeEnum and the credential index
+                         * (if applicable or 0 if not) to retrieve the status for.
                          *
                          * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.38.1
                          */
@@ -10809,9 +10823,9 @@ export declare namespace DoorLock {
                          */
                         lastModifiedFabricIndex: import("../tlv/TlvObject.js").FieldType<import("../datatype/FabricIndex.js").FabricIndex | null>;
                         /**
-                         * This field shall indicate the next occupied index in the database for the credential type requested, which
-                         * is useful for quickly identifying occupied credential slots in the database. This shall NOT be null if there
-                         * is at least one occupied entry after the requested credential index in the corresponding
+                         * This field shall indicate the next occupied index in the database for the credential type requested, which is
+                         * useful for quickly identifying occupied credential slots in the database. This shall NOT be null if there is
+                         * at least one occupied entry after the requested credential index in the corresponding
                          *
                          * database and shall be null if there are no more occupied entries. The NextCredentialIndex reported shall NOT
                          * exceed the maximum number of credentials for a particular credential type.
@@ -10855,9 +10869,9 @@ export declare namespace DoorLock {
                      */
                     readonly clearCredential: Command<import("../tlv/TlvObject.js").TypeFromFields<{
                         /**
-                         * This field shall contain a credential structure that contains the CredentialTypeEnum and the credential
-                         * index (0xFFFE for all credentials or 0 if not applicable) to clear. This shall be null if clearing all
-                         * credential types otherwise it shall NOT be null.
+                         * This field shall contain a credential structure that contains the CredentialTypeEnum and the credential index
+                         * (0xFFFE for all credentials or 0 if not applicable) to clear. This shall be null if clearing all credential
+                         * types otherwise it shall NOT be null.
                          *
                          * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.40.1
                          */
@@ -10906,9 +10920,9 @@ export declare namespace DoorLock {
                          */
                         operationSource: import("../tlv/TlvObject.js").FieldType<OperationSource>;
                         /**
-                         * This field shall indicate the lock UserIndex associated with the change (if any). This shall be null if
-                         * there is no specific user associated with the data operation. This shall be 0xFFFE if all users are affected
-                         * (e.g. Clear Users).
+                         * This field shall indicate the lock UserIndex associated with the change (if any). This shall be null if there
+                         * is no specific user associated with the data operation. This shall be 0xFFFE if all users are affected (e.g.
+                         * Clear Users).
                          *
                          * @see {@link MatterSpecification.v13.Cluster} § 5.2.11.5.4
                          */
@@ -10930,10 +10944,10 @@ export declare namespace DoorLock {
                          */
                         sourceNode: import("../tlv/TlvObject.js").FieldType<import("../datatype/NodeId.js").NodeId | null>;
                         /**
-                         * This field shall indicate the index of the specific item that was changed (e.g. schedule, PIN, RFID, etc.)
-                         * in the list of items identified by LockDataType. This shall be null if the LockDataType does not correspond
-                         * to a list that can be indexed into (e.g. ProgrammingUser). This shall be 0xFFFE if all indices are affected
-                         * (e.g. ClearPINCode, ClearRFIDCode, ClearWeekDaySchedule, ClearYearDaySchedule, etc.).
+                         * This field shall indicate the index of the specific item that was changed (e.g. schedule, PIN, RFID, etc.) in
+                         * the list of items identified by LockDataType. This shall be null if the LockDataType does not correspond to a
+                         * list that can be indexed into (e.g. ProgrammingUser). This shall be 0xFFFE if all indices are affected (e.g.
+                         * ClearPINCode, ClearRFIDCode, ClearWeekDaySchedule, ClearYearDaySchedule, etc.).
                          *
                          * @see {@link MatterSpecification.v13.Cluster} § 5.2.11.5.7
                          */
@@ -11320,8 +11334,8 @@ export declare namespace DoorLock {
                         /**
                          * This field shall indicate the ending time for the Year Day schedule in Epoch Time in Seconds with local time
                          * offset based on the local timezone and DST offset on the day represented by the value. LocalEndTime shall be
-                         * greater than LocalStartTime. This shall be null if the schedule is not set for the YearDayIndex and
-                         * UserIndex provided.
+                         * greater than LocalStartTime. This shall be null if the schedule is not set for the YearDayIndex and UserIndex
+                         * provided.
                          *
                          * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.18.5
                          */
@@ -11435,9 +11449,9 @@ export declare namespace DoorLock {
                          */
                         status: import("../tlv/TlvObject.js").FieldType<Status>;
                         /**
-                         * This field shall indicate the starting time for the Holiday schedule in Epoch Time in Seconds with local
-                         * time offset based on the local timezone and DST offset on the day represented by the value. This shall be
-                         * null if the schedule is not set for the HolidayIndex provided.
+                         * This field shall indicate the starting time for the Holiday schedule in Epoch Time in Seconds with local time
+                         * offset based on the local timezone and DST offset on the day represented by the value. This shall be null if
+                         * the schedule is not set for the HolidayIndex provided.
                          *
                          * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.22.3
                          */
@@ -11495,10 +11509,10 @@ export declare namespace DoorLock {
                      */
                     readonly wrongCodeEntryLimit: WritableAttribute<number, any>;
                     /**
-                     * Indicates the number of seconds that the lock shuts down following wrong code entry. Valid range is
-                     * 1-255 seconds. Device can shut down to lock user out for specified amount of time. (Makes it difficult
-                     * to try and guess a PIN for the device.) If the attribute accepts writes and an attempt to write the
-                     * attribute to 0 is made, the device shall respond with CONSTRAINT_ERROR.
+                     * Indicates the number of seconds that the lock shuts down following wrong code entry. Valid range is 1-255
+                     * seconds. Device can shut down to lock user out for specified amount of time. (Makes it difficult to try
+                     * and guess a PIN for the device.) If the attribute accepts writes and an attempt to write the attribute to
+                     * 0 is made, the device shall respond with CONSTRAINT_ERROR.
                      *
                      * @see {@link MatterSpecification.v13.Cluster} § 5.2.9.33
                      */
@@ -11527,10 +11541,10 @@ export declare namespace DoorLock {
                      */
                     readonly wrongCodeEntryLimit: WritableAttribute<number, any>;
                     /**
-                     * Indicates the number of seconds that the lock shuts down following wrong code entry. Valid range is
-                     * 1-255 seconds. Device can shut down to lock user out for specified amount of time. (Makes it difficult
-                     * to try and guess a PIN for the device.) If the attribute accepts writes and an attempt to write the
-                     * attribute to 0 is made, the device shall respond with CONSTRAINT_ERROR.
+                     * Indicates the number of seconds that the lock shuts down following wrong code entry. Valid range is 1-255
+                     * seconds. Device can shut down to lock user out for specified amount of time. (Makes it difficult to try
+                     * and guess a PIN for the device.) If the attribute accepts writes and an attempt to write the attribute to
+                     * 0 is made, the device shall respond with CONSTRAINT_ERROR.
                      *
                      * @see {@link MatterSpecification.v13.Cluster} § 5.2.9.33
                      */
@@ -11577,8 +11591,8 @@ export declare namespace DoorLock {
                          */
                         userId: import("../tlv/TlvObject.js").FieldType<number>;
                         /**
-                         * This field shall indicate the user status. Only the values 1 (Occupied/Enabled) and 3 (Occupied/Disabled)
-                         * are allowed for UserStatus.
+                         * This field shall indicate the user status. Only the values 1 (Occupied/Enabled) and 3 (Occupied/Disabled) are
+                         * allowed for UserStatus.
                          *
                          * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.4.2
                          */
@@ -11751,8 +11765,8 @@ export declare namespace DoorLock {
                      * NOTE
                      *
                      * Using this command will revoke the ability of all existing Aliro user devices that have the old
-                     * verification key to interact with the lock. This effect is not restricted to a single fabric or
-                     * otherwise scoped in any way.
+                     * verification key to interact with the lock. This effect is not restricted to a single fabric or otherwise
+                     * scoped in any way.
                      *
                      * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.43
                      */
@@ -12054,9 +12068,9 @@ export declare namespace DoorLock {
              * If the User Feature is also supported then any PIN Code stored in the lock shall be associated with a
              * User.
              *
-             * A lock may support multiple credential types so if the User feature is supported the UserType,
-             * UserStatus and Schedules are all associated with a User index and not directly with a PIN index. A User
-             * index may have several credentials associated with it.
+             * A lock may support multiple credential types so if the User feature is supported the UserType, UserStatus
+             * and Schedules are all associated with a User index and not directly with a PIN index. A User index may
+             * have several credentials associated with it.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 5.2.4.1
              */
@@ -12067,9 +12081,9 @@ export declare namespace DoorLock {
              * If the User Feature is also supported then any RFID credential stored in the lock shall be associated
              * with a User.
              *
-             * A lock may support multiple credential types so if the User feature is supported the UserType,
-             * UserStatus and Schedules are all associated with a User index and not directly with a RFID index. A User
-             * Index may have several credentials associated with it.
+             * A lock may support multiple credential types so if the User feature is supported the UserType, UserStatus
+             * and Schedules are all associated with a User index and not directly with a RFID index. A User Index may
+             * have several credentials associated with it.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 5.2.4.2
              */
@@ -12082,9 +12096,9 @@ export declare namespace DoorLock {
              * credentials. If the Users feature is also supported then the User that a fingerprint/finger vein is
              * associated with can also have its UserType, UserStatus and Schedule modified.
              *
-             * A lock may support multiple credential types so if the User feature is supported the UserType,
-             * UserStatus and Schedules are all associated with a User index and not directly with a Finger index. A
-             * User Index may have several credentials associated with it.
+             * A lock may support multiple credential types so if the User feature is supported the UserType, UserStatus
+             * and Schedules are all associated with a User index and not directly with a Finger index. A User Index may
+             * have several credentials associated with it.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 5.2.4.3
              */
@@ -12123,8 +12137,8 @@ export declare namespace DoorLock {
              * recognition, iris, or retina credential is associated with can also have its UserType, UserStatus and
              * Schedule modified.
              *
-             * A lock may support multiple credential types so if the User feature is supported the UserType,
-             * UserStatus and Schedules are all associated with a User and not directly with a credential.
+             * A lock may support multiple credential types so if the User feature is supported the UserType, UserStatus
+             * and Schedules are all associated with a User and not directly with a credential.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 5.2.4.6
              */
@@ -12153,8 +12167,8 @@ export declare namespace DoorLock {
             /**
              * YearDayAccessSchedules
              *
-             * If the User feature is supported then Year Day Schedules are applied to a User and not a credential.
-             * Year Day Schedules are used to restrict access to a specified date and time window.
+             * If the User feature is supported then Year Day Schedules are applied to a User and not a credential. Year
+             * Day Schedules are used to restrict access to a specified date and time window.
              *
              * The lock may automatically adjust the UserType when a schedule is created or cleared.
              *
@@ -12179,10 +12193,10 @@ export declare namespace DoorLock {
              * Unbolting
              *
              * Locks that support this feature differentiate between unbolting and unlocking. The Unbolt Door command
-             * retracts the bolt without pulling the latch. The Unlock Door command fully unlocks the door by
-             * retracting the bolt and briefly pulling the latch. While the latch is pulled, the lock state changes to
-             * Unlatched. Locks without unbolting support don’t differentiate between unbolting and unlocking and
-             * perform the same operation for both commands.
+             * retracts the bolt without pulling the latch. The Unlock Door command fully unlocks the door by retracting
+             * the bolt and briefly pulling the latch. While the latch is pulled, the lock state changes to Unlatched.
+             * Locks without unbolting support don’t differentiate between unbolting and unlocking and perform the same
+             * operation for both commands.
              *
              * @see {@link MatterSpecification.v13.Cluster} § 5.2.4.11
              */
@@ -12474,9 +12488,9 @@ export declare namespace DoorLock {
                  * If the User Feature is also supported then any PIN Code stored in the lock shall be associated with a
                  * User.
                  *
-                 * A lock may support multiple credential types so if the User feature is supported the UserType,
-                 * UserStatus and Schedules are all associated with a User index and not directly with a PIN index. A User
-                 * index may have several credentials associated with it.
+                 * A lock may support multiple credential types so if the User feature is supported the UserType, UserStatus
+                 * and Schedules are all associated with a User index and not directly with a PIN index. A User index may
+                 * have several credentials associated with it.
                  *
                  * @see {@link MatterSpecification.v13.Cluster} § 5.2.4.1
                  */
@@ -12487,9 +12501,9 @@ export declare namespace DoorLock {
                  * If the User Feature is also supported then any RFID credential stored in the lock shall be associated
                  * with a User.
                  *
-                 * A lock may support multiple credential types so if the User feature is supported the UserType,
-                 * UserStatus and Schedules are all associated with a User index and not directly with a RFID index. A User
-                 * Index may have several credentials associated with it.
+                 * A lock may support multiple credential types so if the User feature is supported the UserType, UserStatus
+                 * and Schedules are all associated with a User index and not directly with a RFID index. A User Index may
+                 * have several credentials associated with it.
                  *
                  * @see {@link MatterSpecification.v13.Cluster} § 5.2.4.2
                  */
@@ -12502,9 +12516,9 @@ export declare namespace DoorLock {
                  * credentials. If the Users feature is also supported then the User that a fingerprint/finger vein is
                  * associated with can also have its UserType, UserStatus and Schedule modified.
                  *
-                 * A lock may support multiple credential types so if the User feature is supported the UserType,
-                 * UserStatus and Schedules are all associated with a User index and not directly with a Finger index. A
-                 * User Index may have several credentials associated with it.
+                 * A lock may support multiple credential types so if the User feature is supported the UserType, UserStatus
+                 * and Schedules are all associated with a User index and not directly with a Finger index. A User Index may
+                 * have several credentials associated with it.
                  *
                  * @see {@link MatterSpecification.v13.Cluster} § 5.2.4.3
                  */
@@ -12543,8 +12557,8 @@ export declare namespace DoorLock {
                  * recognition, iris, or retina credential is associated with can also have its UserType, UserStatus and
                  * Schedule modified.
                  *
-                 * A lock may support multiple credential types so if the User feature is supported the UserType,
-                 * UserStatus and Schedules are all associated with a User and not directly with a credential.
+                 * A lock may support multiple credential types so if the User feature is supported the UserType, UserStatus
+                 * and Schedules are all associated with a User and not directly with a credential.
                  *
                  * @see {@link MatterSpecification.v13.Cluster} § 5.2.4.6
                  */
@@ -12573,8 +12587,8 @@ export declare namespace DoorLock {
                 /**
                  * YearDayAccessSchedules
                  *
-                 * If the User feature is supported then Year Day Schedules are applied to a User and not a credential.
-                 * Year Day Schedules are used to restrict access to a specified date and time window.
+                 * If the User feature is supported then Year Day Schedules are applied to a User and not a credential. Year
+                 * Day Schedules are used to restrict access to a specified date and time window.
                  *
                  * The lock may automatically adjust the UserType when a schedule is created or cleared.
                  *
@@ -12599,10 +12613,10 @@ export declare namespace DoorLock {
                  * Unbolting
                  *
                  * Locks that support this feature differentiate between unbolting and unlocking. The Unbolt Door command
-                 * retracts the bolt without pulling the latch. The Unlock Door command fully unlocks the door by
-                 * retracting the bolt and briefly pulling the latch. While the latch is pulled, the lock state changes to
-                 * Unlatched. Locks without unbolting support don’t differentiate between unbolting and unlocking and
-                 * perform the same operation for both commands.
+                 * retracts the bolt without pulling the latch. The Unlock Door command fully unlocks the door by retracting
+                 * the bolt and briefly pulling the latch. While the latch is pulled, the lock state changes to Unlatched.
+                 * Locks without unbolting support don’t differentiate between unbolting and unlocking and perform the same
+                 * operation for both commands.
                  *
                  * @see {@link MatterSpecification.v13.Cluster} § 5.2.4.11
                  */
@@ -12639,25 +12653,29 @@ export declare namespace DoorLock {
             readonly soundVolume: OptionalWritableAttribute<SoundVolume, any>;
             readonly supportedOperatingModes: FixedAttribute<import("../schema/BitmapSchema.js").TypeFromPartialBitSchema<{
                 /**
-                 * Normal operation mode
+                 * Normal operation mode is NOT supported
                  */
                 normal: BitFlag;
                 /**
-                 * Vacation operation mode
+                 * Vacation operation mode is NOT supported
                  */
                 vacation: BitFlag;
                 /**
-                 * Privacy operation mode
+                 * Privacy operation mode is NOT supported
                  */
                 privacy: BitFlag;
                 /**
-                 * No remote lock and unlock operation mode
+                 * No remote lock and unlock operation mode is NOT supported
                  */
                 noRemoteLockUnlock: BitFlag;
                 /**
-                 * Passage operation mode
+                 * Passage operation mode is NOT supported
                  */
                 passage: BitFlag;
+                /**
+                 * This needs always be set because this bitmap is inverse.!
+                 */
+                alwaysSet: BitField;
             }>, any>;
             readonly defaultConfigurationRegister: OptionalAttribute<import("../schema/BitmapSchema.js").TypeFromPartialBitSchema<{
                 /**
@@ -12824,8 +12842,8 @@ export declare namespace DoorLock {
                  */
                 userId: import("../tlv/TlvObject.js").FieldType<number>;
                 /**
-                 * This field shall indicate the user status. Only the values 1 (Occupied/Enabled) and 3 (Occupied/Disabled)
-                 * are allowed for UserStatus.
+                 * This field shall indicate the user status. Only the values 1 (Occupied/Enabled) and 3 (Occupied/Disabled) are
+                 * allowed for UserStatus.
                  *
                  * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.4.2
                  */
@@ -13231,8 +13249,8 @@ export declare namespace DoorLock {
                 /**
                  * This field shall indicate the ending time for the Year Day schedule in Epoch Time in Seconds with local time
                  * offset based on the local timezone and DST offset on the day represented by the value. LocalEndTime shall be
-                 * greater than LocalStartTime. This shall be null if the schedule is not set for the YearDayIndex and
-                 * UserIndex provided.
+                 * greater than LocalStartTime. This shall be null if the schedule is not set for the YearDayIndex and UserIndex
+                 * provided.
                  *
                  * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.18.5
                  */
@@ -13331,9 +13349,9 @@ export declare namespace DoorLock {
                  */
                 status: import("../tlv/TlvObject.js").FieldType<Status>;
                 /**
-                 * This field shall indicate the starting time for the Holiday schedule in Epoch Time in Seconds with local
-                 * time offset based on the local timezone and DST offset on the day represented by the value. This shall be
-                 * null if the schedule is not set for the HolidayIndex provided.
+                 * This field shall indicate the starting time for the Holiday schedule in Epoch Time in Seconds with local time
+                 * offset based on the local timezone and DST offset on the day represented by the value. This shall be null if
+                 * the schedule is not set for the HolidayIndex provided.
                  *
                  * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.22.3
                  */
@@ -13535,8 +13553,8 @@ export declare namespace DoorLock {
                  *   • If the OperationType is Add, the UserUniqueID in the resulting user record shall be set to default value
                  *     specified above.
                  *
-                 *   • If the OperationType is Modify, the UserUniqueID in the user record shall NOT be changed from the
-                 *     current value.
+                 *   • If the OperationType is Modify, the UserUniqueID in the user record shall NOT be changed from the current
+                 *     value.
                  *
                  * If UserUniqueID is not null, the UserUniqueID in the user record shall be set to the provided value.
                  *
@@ -13576,8 +13594,8 @@ export declare namespace DoorLock {
                 /**
                  * This field shall indicate the CredentialRule to use for this user.
                  *
-                 * The valid CredentialRule enumeration values depends on the bits in the CredentialRulesBitmap map. Each bit
-                 * in the map identifies a valid CredentialRule that can be used.
+                 * The valid CredentialRule enumeration values depends on the bits in the CredentialRulesBitmap map. Each bit in
+                 * the map identifies a valid CredentialRule that can be used.
                  *
                  * If CredentialRule is null then:
                  *
@@ -13679,10 +13697,9 @@ export declare namespace DoorLock {
                  */
                 lastModifiedFabricIndex: import("../tlv/TlvObject.js").FieldType<import("../datatype/FabricIndex.js").FabricIndex | null>;
                 /**
-                 * This field shall indicate the next occupied UserIndex in the database which is useful for quickly
-                 * identifying occupied user slots in the database. This shall NOT be null if there is at least one occupied
-                 * entry after the requested UserIndex in the User database and shall be null if there are no more occupied
-                 * entries.
+                 * This field shall indicate the next occupied UserIndex in the database which is useful for quickly identifying
+                 * occupied user slots in the database. This shall NOT be null if there is at least one occupied entry after the
+                 * requested UserIndex in the User database and shall be null if there are no more occupied entries.
                  *
                  * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.34.10
                  */
@@ -13718,8 +13735,8 @@ export declare namespace DoorLock {
                  */
                 operationType: import("../tlv/TlvObject.js").FieldType<DataOperationType>;
                 /**
-                 * This field shall contain a credential structure that contains the CredentialTypeEnum and the credential
-                 * index (if applicable or 0 if not) to set.
+                 * This field shall contain a credential structure that contains the CredentialTypeEnum and the credential index
+                 * (if applicable or 0 if not) to set.
                  *
                  * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.36.2
                  */
@@ -13748,9 +13765,9 @@ export declare namespace DoorLock {
                  */
                 credentialData: import("../tlv/TlvObject.js").FieldType<Uint8Array<ArrayBufferLike>>;
                 /**
-                 * This field shall indicate the user index to the user record that corresponds to the credential being added
-                 * or modified. This shall be null if OperationType is add and a new credential and user is being added at the
-                 * same time.
+                 * This field shall indicate the user index to the user record that corresponds to the credential being added or
+                 * modified. This shall be null if OperationType is add and a new credential and user is being added at the same
+                 * time.
                  *
                  * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.36.4
                  */
@@ -13817,10 +13834,10 @@ export declare namespace DoorLock {
                 userIndex: import("../tlv/TlvObject.js").FieldType<number | null>;
                 /**
                  * This field shall indicate the next available index in the database for the credential type set, which is
-                 * useful for quickly identifying available credential slots in the database. This shall NOT be null if there
-                 * is at least one available entry after the requested credential index in the corresponding database and shall
-                 * be null if there are no more available entries. The NextCredentialIndex reported shall NOT exceed the
-                 * maximum number of credentials for a particular credential type.
+                 * useful for quickly identifying available credential slots in the database. This shall NOT be null if there is
+                 * at least one available entry after the requested credential index in the corresponding database and shall be
+                 * null if there are no more available entries. The NextCredentialIndex reported shall NOT exceed the maximum
+                 * number of credentials for a particular credential type.
                  *
                  * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.37.3
                  */
@@ -13835,8 +13852,8 @@ export declare namespace DoorLock {
             };
             readonly getCredentialStatus: Command<import("../tlv/TlvObject.js").TypeFromFields<{
                 /**
-                 * This field shall contain a credential structure that contains the CredentialTypeEnum and the credential
-                 * index (if applicable or 0 if not) to retrieve the status for.
+                 * This field shall contain a credential structure that contains the CredentialTypeEnum and the credential index
+                 * (if applicable or 0 if not) to retrieve the status for.
                  *
                  * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.38.1
                  */
@@ -13891,9 +13908,9 @@ export declare namespace DoorLock {
                  */
                 lastModifiedFabricIndex: import("../tlv/TlvObject.js").FieldType<import("../datatype/FabricIndex.js").FabricIndex | null>;
                 /**
-                 * This field shall indicate the next occupied index in the database for the credential type requested, which
-                 * is useful for quickly identifying occupied credential slots in the database. This shall NOT be null if there
-                 * is at least one occupied entry after the requested credential index in the corresponding
+                 * This field shall indicate the next occupied index in the database for the credential type requested, which is
+                 * useful for quickly identifying occupied credential slots in the database. This shall NOT be null if there is
+                 * at least one occupied entry after the requested credential index in the corresponding
                  *
                  * database and shall be null if there are no more occupied entries. The NextCredentialIndex reported shall NOT
                  * exceed the maximum number of credentials for a particular credential type.
@@ -13930,9 +13947,9 @@ export declare namespace DoorLock {
             };
             readonly clearCredential: Command<import("../tlv/TlvObject.js").TypeFromFields<{
                 /**
-                 * This field shall contain a credential structure that contains the CredentialTypeEnum and the credential
-                 * index (0xFFFE for all credentials or 0 if not applicable) to clear. This shall be null if clearing all
-                 * credential types otherwise it shall NOT be null.
+                 * This field shall contain a credential structure that contains the CredentialTypeEnum and the credential index
+                 * (0xFFFE for all credentials or 0 if not applicable) to clear. This shall be null if clearing all credential
+                 * types otherwise it shall NOT be null.
                  *
                  * @see {@link MatterSpecification.v13.Cluster} § 5.2.10.40.1
                  */
@@ -14022,8 +14039,8 @@ export declare namespace DoorLock {
                  * If the RequirePINforRemoteOperation attribute is True then PINCode field shall be provided and the door lock
                  * shall NOT grant access if it is not provided.
                  *
-                 * If the PINCode field is provided, the door lock shall verify PINCode before granting access regardless of
-                 * the value of RequirePINForRemoteOperation attribute.
+                 * If the PINCode field is provided, the door lock shall verify PINCode before granting access regardless of the
+                 * value of RequirePINForRemoteOperation attribute.
                  *
                  * When the PINCode field is provided an invalid PIN will count towards the WrongCodeEntryLimit and the
                  * UserCodeTemporaryDisableTime will be triggered if the WrongCodeEntryLimit is exceeded. The lock shall ignore
@@ -14093,9 +14110,9 @@ export declare namespace DoorLock {
                  */
                 operationSource: import("../tlv/TlvObject.js").FieldType<OperationSource>;
                 /**
-                 * This field shall indicate the lock UserIndex associated with the change (if any). This shall be null if
-                 * there is no specific user associated with the data operation. This shall be 0xFFFE if all users are affected
-                 * (e.g. Clear Users).
+                 * This field shall indicate the lock UserIndex associated with the change (if any). This shall be null if there
+                 * is no specific user associated with the data operation. This shall be 0xFFFE if all users are affected (e.g.
+                 * Clear Users).
                  *
                  * @see {@link MatterSpecification.v13.Cluster} § 5.2.11.5.4
                  */
@@ -14117,10 +14134,10 @@ export declare namespace DoorLock {
                  */
                 sourceNode: import("../tlv/TlvObject.js").FieldType<import("../datatype/NodeId.js").NodeId | null>;
                 /**
-                 * This field shall indicate the index of the specific item that was changed (e.g. schedule, PIN, RFID, etc.)
-                 * in the list of items identified by LockDataType. This shall be null if the LockDataType does not correspond
-                 * to a list that can be indexed into (e.g. ProgrammingUser). This shall be 0xFFFE if all indices are affected
-                 * (e.g. ClearPINCode, ClearRFIDCode, ClearWeekDaySchedule, ClearYearDaySchedule, etc.).
+                 * This field shall indicate the index of the specific item that was changed (e.g. schedule, PIN, RFID, etc.) in
+                 * the list of items identified by LockDataType. This shall be null if the LockDataType does not correspond to a
+                 * list that can be indexed into (e.g. ProgrammingUser). This shall be 0xFFFE if all indices are affected (e.g.
+                 * ClearPINCode, ClearRFIDCode, ClearWeekDaySchedule, ClearYearDaySchedule, etc.).
                  *
                  * @see {@link MatterSpecification.v13.Cluster} § 5.2.11.5.7
                  */
@@ -14221,8 +14238,8 @@ export declare namespace DoorLock {
                  */
                 operationError: import("../tlv/TlvObject.js").FieldType<OperationError>;
                 /**
-                 * This field shall indicate the lock UserIndex who performed the lock operation. This shall be null if there
-                 * is no user id that can be determined for the given operation source.
+                 * This field shall indicate the lock UserIndex who performed the lock operation. This shall be null if there is
+                 * no user id that can be determined for the given operation source.
                  *
                  * @see {@link MatterSpecification.v13.Cluster} § 5.2.11.4.4
                  */
@@ -14271,8 +14288,8 @@ export declare namespace DoorLock {
     /**
      * This cluster supports all DoorLock features. It may support illegal feature combinations.
      *
-     * If you use this cluster you must manually specify which features are active and ensure the set of active
-     * features is legal per the Matter specification.
+     * If you use this cluster you must manually specify which features are active and ensure the set of active features
+     * is legal per the Matter specification.
      */
     interface Complete extends Identity<typeof CompleteInstance> {
     }