@matter/types 0.11.0-alpha.0-20241005-e3e4e4a7a

package/dist/esm/clusters/valve-configuration-and-control.d.ts

@@ -0,0 +1,1146 @@
+/**
+ * @license
+ * Copyright 2022-2024 Matter.js Authors
+ * SPDX-License-Identifier: Apache-2.0
+ */
+/*** THIS FILE IS GENERATED, DO NOT EDIT ***/
+import { MutableCluster } from "../cluster/mutation/MutableCluster.js";
+import { Attribute, OptionalWritableAttribute, OptionalFixedAttribute, WritableAttribute, OptionalAttribute, Command, OptionalEvent } from "../cluster/Cluster.js";
+import { BitFlag } from "../schema/BitmapSchema.js";
+import { TypeFromSchema } from "../tlv/TlvSchema.js";
+import { Identity } from "#general";
+export declare namespace ValveConfigurationAndControl {
+    /**
+     * These are optional features supported by ValveConfigurationAndControlCluster.
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.6.4
+     */
+    enum Feature {
+        /**
+         * TimeSync (TS)
+         *
+         * This feature shall indicate that the valve uses Time Synchronization and UTC time to indicate duration and
+         * auto close time.
+         *
+         * This feature shall NOT be supported unless the device supports the Time Synchronization cluster.
+         *
+         * @see {@link MatterSpecification.v13.Cluster} § 4.6.4.1
+         */
+        TimeSync = "TimeSync",
+        /**
+         * Level (LVL)
+         *
+         * This feature shall indicate that the valve is capable of being adjusted to a specific position, as a
+         * percentage, of its full range of motion.
+         *
+         * @see {@link MatterSpecification.v13.Cluster} § 4.6.4.2
+         */
+        Level = "Level"
+    }
+    /**
+     * @see {@link MatterSpecification.v13.Cluster} § 4.6.5.2
+     */
+    enum ValveState {
+        /**
+         * Valve is in closed position
+         */
+        Closed = 0,
+        /**
+         * Valve is in open position
+         */
+        Open = 1,
+        /**
+         * Valve is transitioning between closed and open positions or between levels
+         */
+        Transitioning = 2
+    }
+    /**
+     * @see {@link MatterSpecification.v13.Cluster} § 4.6.5.1
+     */
+    const ValveFault: {
+        /**
+         * Unspecified fault detected
+         */
+        generalFault: BitFlag;
+        /**
+         * Valve is blocked
+         */
+        blocked: BitFlag;
+        /**
+         * Valve has detected a leak
+         */
+        leaking: BitFlag;
+        /**
+         * No valve is connected to controller
+         */
+        notConnected: BitFlag;
+        /**
+         * Short circuit is detected
+         */
+        shortCircuit: BitFlag;
+        /**
+         * The available current has been exceeded
+         */
+        currentExceeded: BitFlag;
+    };
+    /**
+     * Input to the ValveConfigurationAndControl open command
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.6.8.1
+     */
+    const TlvOpenRequest: import("../tlv/TlvObject.js").ObjectSchema<{
+        /**
+         * This field shall indicate the duration that the valve will remain open for this specific Open command.
+         *
+         * A value of null shall indicate the duration is not set, meaning that the valve will remain open until closed
+         * by the user or some other automation.
+         *
+         * @see {@link MatterSpecification.v13.Cluster} § 4.6.8.1.1
+         */
+        openDuration: import("../tlv/TlvObject.js").OptionalFieldType<number | null>;
+        /**
+         * This field shall indicate the target level used for this specific Open command.
+         *
+         * @see {@link MatterSpecification.v13.Cluster} § 4.6.8.1.2
+         */
+        targetLevel: import("../tlv/TlvObject.js").OptionalFieldType<number>;
+    }>;
+    /**
+     * Input to the ValveConfigurationAndControl open command
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.6.8.1
+     */
+    interface OpenRequest extends TypeFromSchema<typeof TlvOpenRequest> {
+    }
+    /**
+     * Body of the ValveConfigurationAndControl valveStateChanged event
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.6.9.1
+     */
+    const TlvValveStateChangedEvent: import("../tlv/TlvObject.js").ObjectSchema<{
+        /**
+         * This field shall indicate the new state of the valve.
+         *
+         * @see {@link MatterSpecification.v13.Cluster} § 4.6.9.1.1
+         */
+        valveState: import("../tlv/TlvObject.js").FieldType<ValveState>;
+        /**
+         * This field shall indicate the new level of the valve.
+         *
+         * @see {@link MatterSpecification.v13.Cluster} § 4.6.9.1.2
+         */
+        valveLevel: import("../tlv/TlvObject.js").OptionalFieldType<number>;
+    }>;
+    /**
+     * Body of the ValveConfigurationAndControl valveStateChanged event
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.6.9.1
+     */
+    interface ValveStateChangedEvent extends TypeFromSchema<typeof TlvValveStateChangedEvent> {
+    }
+    /**
+     * Body of the ValveConfigurationAndControl valveFault event
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.6.9.2
+     */
+    const TlvValveFaultEvent: import("../tlv/TlvObject.js").ObjectSchema<{
+        /**
+         * This field shall indicate the value of the ValveFault attribute, at the time this event is generated.
+         *
+         * @see {@link MatterSpecification.v13.Cluster} § 4.6.9.2.1
+         */
+        valveFault: import("../tlv/TlvObject.js").FieldType<import("../schema/BitmapSchema.js").TypeFromPartialBitSchema<{
+            /**
+             * Unspecified fault detected
+             */
+            generalFault: BitFlag;
+            /**
+             * Valve is blocked
+             */
+            blocked: BitFlag;
+            /**
+             * Valve has detected a leak
+             */
+            leaking: BitFlag;
+            /**
+             * No valve is connected to controller
+             */
+            notConnected: BitFlag;
+            /**
+             * Short circuit is detected
+             */
+            shortCircuit: BitFlag;
+            /**
+             * The available current has been exceeded
+             */
+            currentExceeded: BitFlag;
+        }>>;
+    }>;
+    /**
+     * Body of the ValveConfigurationAndControl valveFault event
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.6.9.2
+     */
+    interface ValveFaultEvent extends TypeFromSchema<typeof TlvValveFaultEvent> {
+    }
+    /**
+     * @see {@link MatterSpecification.v13.Cluster} § 4.6.6.1
+     */
+    enum StatusCode {
+        /**
+         * The requested action could not be performed due to a fault on the valve.
+         */
+        FailureDueToFault = 2
+    }
+    /**
+     * A ValveConfigurationAndControlCluster supports these elements if it supports feature TimeSync.
+     */
+    const TimeSyncComponent: {
+        readonly attributes: {
+            /**
+             * Indicates the UTC time when the valve will close, depending on value of the OpenDuration attribute.
+             *
+             * Null:
+             *
+             *   • When OpenDuration is null, or
+             *
+             *   • When the valve does not have a synchronized UTCTime in the Time Synchronization cluster, or
+             *
+             *   • When the valve is closed.
+             *
+             * When the value of this attribute is earlier or equal to the current UTC time, the valve shall
+             * automatically transition to its closed position. The behavior of transitioning to the closed position,
+             * shall match the behavior described in the Close command.
+             *
+             * If this attribute is not null and the Time Synchronization cluster receives a SetUTCTime command,
+             * modifying the current UTC time of the device, the value of this attribute shall be adjusted to match the
+             * new UTC time plus the value of the RemainingDuration attribute.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.6.7.3
+             */
+            readonly autoCloseTime: Attribute<number | bigint | null, any>;
+        };
+    };
+    /**
+     * A ValveConfigurationAndControlCluster supports these elements if it supports feature Level.
+     */
+    const LevelComponent: {
+        readonly attributes: {
+            /**
+             * Indicates the current level of the valve as a percentage value, between fully closed and fully open.
+             * During a transition from one level to another level, the valve SHOULD keep this attribute updated to the
+             * best of its ability, in order to represent the actual level of the valve during the movement.
+             *
+             * A value of 100 percent shall indicate the fully open position. A value of 0 percent shall indicate the
+             * fully closed position.
+             *
+             * A value of null shall indicate that the current state is not known.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.6.7.7
+             */
+            readonly currentLevel: Attribute<number | null, any>;
+            /**
+             * Indicates the target level of the valve as a percentage value, between fully closed and fully open.
+             *
+             * The interpretation of the percentage value is the same as for the CurrentLevel attribute.
+             *
+             * A value of null shall indicate that no target position is set, since the change of level is either done
+             * or failed.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.6.7.8
+             */
+            readonly targetLevel: Attribute<number | null, any>;
+            /**
+             * Indicates the default value used for the TargetLevel attribute, when a valve transitions from the closed
+             * to the open state, caused by an Open command, if a TargetLevel field is not present in the Open command.
+             *
+             * If the LevelStep attribute is present and the value of a write interaction to this attribute field is
+             * not 100, the value shall be a supported value as defined by the LevelStep attribute, such that (Value
+             * received in the write interaction) % (Value of LevelStep attribute) equals 0. If the resulting value is
+             * not 0, the requested DefaultOpenLevel value is considered an unsupported value and a CONSTRAINT_ERROR
+             * status shall be returned.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.6.7.9
+             */
+            readonly defaultOpenLevel: OptionalWritableAttribute<number, any>;
+            /**
+             * Indicates the step size the valve can support.
+             *
+             * The step size defined by this attribute is counted from 0 and the final step towards 100 may be
+             * different than what is defined in this attribute. For example, if the value of this attribute is 15, it
+             * results in these target values being supported; 0, 15, 30, 45, 60, 75, 90 and 100.
+             *
+             * The values of 0 and 100 shall always be supported, regardless of the value of this attribute.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.6.7.11
+             */
+            readonly levelStep: OptionalFixedAttribute<number, any>;
+        };
+    };
+    /**
+     * These elements and properties are present in all ValveConfigurationAndControl clusters.
+     */
+    const Base: {
+        readonly id: 129;
+        readonly name: "ValveConfigurationAndControl";
+        readonly revision: 1;
+        readonly features: {
+            /**
+             * TimeSync
+             *
+             * This feature shall indicate that the valve uses Time Synchronization and UTC time to indicate duration
+             * and auto close time.
+             *
+             * This feature shall NOT be supported unless the device supports the Time Synchronization cluster.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.6.4.1
+             */
+            readonly timeSync: BitFlag;
+            /**
+             * Level
+             *
+             * This feature shall indicate that the valve is capable of being adjusted to a specific position, as a
+             * percentage, of its full range of motion.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.6.4.2
+             */
+            readonly level: BitFlag;
+        };
+        readonly attributes: {
+            /**
+             * Indicates the total duration, in seconds, for which the valve will remain open for this current opening.
+             *
+             * A value of null shall indicate the duration is not set, meaning that the valve will remain open until
+             * closed by the user or some other automation.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.6.7.1
+             */
+            readonly openDuration: Attribute<number | null, any>;
+            /**
+             * Indicates the default duration, in seconds, for which the valve will remain open, if the OpenDuration
+             * field is not present in the Open command.
+             *
+             * A value of null shall indicate the duration is not set, meaning that the valve will remain open until
+             * closed by the user or some other automation.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.6.7.2
+             */
+            readonly defaultOpenDuration: WritableAttribute<number | null, any>;
+            /**
+             * Indicates the remaining duration, in seconds, until the valve closes. Null:
+             *
+             *   • When OpenDuration is null, or
+             *
+             *   • When the valve is closed.
+             *
+             * The value of this attribute shall only be reported in the following cases:
+             *
+             *   • When it changes from null to any other value and vice versa, or
+             *
+             *   • When it changes to 0, or
+             *
+             *   • When it increases, or
+             *
+             *   • When the closing time changes.
+             *
+             * Meaning that clients SHOULD NOT rely on the reporting of this attribute in order to keep track of the
+             * remaining duration, due to this attribute not being reported during regular countdown.
+             *
+             * When reading this attribute it shall return the remaining duration, in seconds, until the valve closes.
+             *
+             * When the value of this attribute counts down to 0, the valve shall automatically transition to its
+             * closed position. The behavior of transitioning to the closed position shall match the behavior described
+             * in the Close command.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.6.7.4
+             */
+            readonly remainingDuration: Attribute<number | null, any>;
+            /**
+             * Indicates the current state of the valve.
+             *
+             * A value of null shall indicate that the current state is not known.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.6.7.5
+             */
+            readonly currentState: Attribute<ValveState | null, any>;
+            /**
+             * Indicates the target state, while changing the state, of the valve.
+             *
+             * A value of null shall indicate that no target position is set, since the change in state is either done
+             * or failed.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.6.7.6
+             */
+            readonly targetState: Attribute<ValveState | null, any>;
+            /**
+             * Indicates any faults registered by the valve.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.6.7.10
+             */
+            readonly valveFault: OptionalAttribute<import("../schema/BitmapSchema.js").TypeFromPartialBitSchema<{
+                /**
+                 * Unspecified fault detected
+                 */
+                generalFault: BitFlag;
+                /**
+                 * Valve is blocked
+                 */
+                blocked: BitFlag;
+                /**
+                 * Valve has detected a leak
+                 */
+                leaking: BitFlag;
+                /**
+                 * No valve is connected to controller
+                 */
+                notConnected: BitFlag;
+                /**
+                 * Short circuit is detected
+                 */
+                shortCircuit: BitFlag;
+                /**
+                 * The available current has been exceeded
+                 */
+                currentExceeded: BitFlag;
+            }>, any>;
+        };
+        readonly commands: {
+            /**
+             * This command is used to set the valve to its open position.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.6.8.1
+             */
+            readonly open: Command<import("../tlv/TlvObject.js").TypeFromFields<{
+                /**
+                 * This field shall indicate the duration that the valve will remain open for this specific Open command.
+                 *
+                 * A value of null shall indicate the duration is not set, meaning that the valve will remain open until closed
+                 * by the user or some other automation.
+                 *
+                 * @see {@link MatterSpecification.v13.Cluster} § 4.6.8.1.1
+                 */
+                openDuration: import("../tlv/TlvObject.js").OptionalFieldType<number | null>;
+                /**
+                 * This field shall indicate the target level used for this specific Open command.
+                 *
+                 * @see {@link MatterSpecification.v13.Cluster} § 4.6.8.1.2
+                 */
+                targetLevel: import("../tlv/TlvObject.js").OptionalFieldType<number>;
+            }>, void, any>;
+            /**
+             * This command is used to set the valve to its closed position.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.6.8.2
+             */
+            readonly close: Command<void, void, any>;
+        };
+        readonly events: {
+            /**
+             * This event shall be generated when the valve state changed. For level changes, after the end of
+             * movement, for state changes when the new state has been reached.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.6.9.1
+             */
+            readonly valveStateChanged: OptionalEvent<import("../tlv/TlvObject.js").TypeFromFields<{
+                /**
+                 * This field shall indicate the new state of the valve.
+                 *
+                 * @see {@link MatterSpecification.v13.Cluster} § 4.6.9.1.1
+                 */
+                valveState: import("../tlv/TlvObject.js").FieldType<ValveState>;
+                /**
+                 * This field shall indicate the new level of the valve.
+                 *
+                 * @see {@link MatterSpecification.v13.Cluster} § 4.6.9.1.2
+                 */
+                valveLevel: import("../tlv/TlvObject.js").OptionalFieldType<number>;
+            }>, any>;
+            /**
+             * This event shall be generated when the valve registers or clears a fault, e.g. not being able to
+             * transition to the requested target level or state.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.6.9.2
+             */
+            readonly valveFault: OptionalEvent<import("../tlv/TlvObject.js").TypeFromFields<{
+                /**
+                 * This field shall indicate the value of the ValveFault attribute, at the time this event is generated.
+                 *
+                 * @see {@link MatterSpecification.v13.Cluster} § 4.6.9.2.1
+                 */
+                valveFault: import("../tlv/TlvObject.js").FieldType<import("../schema/BitmapSchema.js").TypeFromPartialBitSchema<{
+                    /**
+                     * Unspecified fault detected
+                     */
+                    generalFault: BitFlag;
+                    /**
+                     * Valve is blocked
+                     */
+                    blocked: BitFlag;
+                    /**
+                     * Valve has detected a leak
+                     */
+                    leaking: BitFlag;
+                    /**
+                     * No valve is connected to controller
+                     */
+                    notConnected: BitFlag;
+                    /**
+                     * Short circuit is detected
+                     */
+                    shortCircuit: BitFlag;
+                    /**
+                     * The available current has been exceeded
+                     */
+                    currentExceeded: BitFlag;
+                }>>;
+            }>, any>;
+        };
+        /**
+         * This metadata controls which ValveConfigurationAndControlCluster elements matter.js activates for specific
+         * feature combinations.
+         */
+        readonly extensions: readonly [{
+            readonly flags: {
+                readonly timeSync: true;
+            };
+            readonly component: {
+                readonly attributes: {
+                    /**
+                     * Indicates the UTC time when the valve will close, depending on value of the OpenDuration attribute.
+                     *
+                     * Null:
+                     *
+                     *   • When OpenDuration is null, or
+                     *
+                     *   • When the valve does not have a synchronized UTCTime in the Time Synchronization cluster, or
+                     *
+                     *   • When the valve is closed.
+                     *
+                     * When the value of this attribute is earlier or equal to the current UTC time, the valve shall
+                     * automatically transition to its closed position. The behavior of transitioning to the closed position,
+                     * shall match the behavior described in the Close command.
+                     *
+                     * If this attribute is not null and the Time Synchronization cluster receives a SetUTCTime command,
+                     * modifying the current UTC time of the device, the value of this attribute shall be adjusted to match the
+                     * new UTC time plus the value of the RemainingDuration attribute.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.6.7.3
+                     */
+                    readonly autoCloseTime: Attribute<number | bigint | null, any>;
+                };
+            };
+        }, {
+            readonly flags: {
+                readonly level: true;
+            };
+            readonly component: {
+                readonly attributes: {
+                    /**
+                     * Indicates the current level of the valve as a percentage value, between fully closed and fully open.
+                     * During a transition from one level to another level, the valve SHOULD keep this attribute updated to the
+                     * best of its ability, in order to represent the actual level of the valve during the movement.
+                     *
+                     * A value of 100 percent shall indicate the fully open position. A value of 0 percent shall indicate the
+                     * fully closed position.
+                     *
+                     * A value of null shall indicate that the current state is not known.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.6.7.7
+                     */
+                    readonly currentLevel: Attribute<number | null, any>;
+                    /**
+                     * Indicates the target level of the valve as a percentage value, between fully closed and fully open.
+                     *
+                     * The interpretation of the percentage value is the same as for the CurrentLevel attribute.
+                     *
+                     * A value of null shall indicate that no target position is set, since the change of level is either done
+                     * or failed.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.6.7.8
+                     */
+                    readonly targetLevel: Attribute<number | null, any>;
+                    /**
+                     * Indicates the default value used for the TargetLevel attribute, when a valve transitions from the closed
+                     * to the open state, caused by an Open command, if a TargetLevel field is not present in the Open command.
+                     *
+                     * If the LevelStep attribute is present and the value of a write interaction to this attribute field is
+                     * not 100, the value shall be a supported value as defined by the LevelStep attribute, such that (Value
+                     * received in the write interaction) % (Value of LevelStep attribute) equals 0. If the resulting value is
+                     * not 0, the requested DefaultOpenLevel value is considered an unsupported value and a CONSTRAINT_ERROR
+                     * status shall be returned.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.6.7.9
+                     */
+                    readonly defaultOpenLevel: OptionalWritableAttribute<number, any>;
+                    /**
+                     * Indicates the step size the valve can support.
+                     *
+                     * The step size defined by this attribute is counted from 0 and the final step towards 100 may be
+                     * different than what is defined in this attribute. For example, if the value of this attribute is 15, it
+                     * results in these target values being supported; 0, 15, 30, 45, 60, 75, 90 and 100.
+                     *
+                     * The values of 0 and 100 shall always be supported, regardless of the value of this attribute.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.6.7.11
+                     */
+                    readonly levelStep: OptionalFixedAttribute<number, any>;
+                };
+            };
+        }];
+    };
+    /**
+     * @see {@link Cluster}
+     */
+    const ClusterInstance: MutableCluster<{
+        readonly id: 129;
+        readonly name: "ValveConfigurationAndControl";
+        readonly revision: 1;
+        readonly features: {
+            /**
+             * TimeSync
+             *
+             * This feature shall indicate that the valve uses Time Synchronization and UTC time to indicate duration
+             * and auto close time.
+             *
+             * This feature shall NOT be supported unless the device supports the Time Synchronization cluster.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.6.4.1
+             */
+            readonly timeSync: BitFlag;
+            /**
+             * Level
+             *
+             * This feature shall indicate that the valve is capable of being adjusted to a specific position, as a
+             * percentage, of its full range of motion.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.6.4.2
+             */
+            readonly level: BitFlag;
+        };
+        readonly attributes: {
+            /**
+             * Indicates the total duration, in seconds, for which the valve will remain open for this current opening.
+             *
+             * A value of null shall indicate the duration is not set, meaning that the valve will remain open until
+             * closed by the user or some other automation.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.6.7.1
+             */
+            readonly openDuration: Attribute<number | null, any>;
+            /**
+             * Indicates the default duration, in seconds, for which the valve will remain open, if the OpenDuration
+             * field is not present in the Open command.
+             *
+             * A value of null shall indicate the duration is not set, meaning that the valve will remain open until
+             * closed by the user or some other automation.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.6.7.2
+             */
+            readonly defaultOpenDuration: WritableAttribute<number | null, any>;
+            /**
+             * Indicates the remaining duration, in seconds, until the valve closes. Null:
+             *
+             *   • When OpenDuration is null, or
+             *
+             *   • When the valve is closed.
+             *
+             * The value of this attribute shall only be reported in the following cases:
+             *
+             *   • When it changes from null to any other value and vice versa, or
+             *
+             *   • When it changes to 0, or
+             *
+             *   • When it increases, or
+             *
+             *   • When the closing time changes.
+             *
+             * Meaning that clients SHOULD NOT rely on the reporting of this attribute in order to keep track of the
+             * remaining duration, due to this attribute not being reported during regular countdown.
+             *
+             * When reading this attribute it shall return the remaining duration, in seconds, until the valve closes.
+             *
+             * When the value of this attribute counts down to 0, the valve shall automatically transition to its
+             * closed position. The behavior of transitioning to the closed position shall match the behavior described
+             * in the Close command.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.6.7.4
+             */
+            readonly remainingDuration: Attribute<number | null, any>;
+            /**
+             * Indicates the current state of the valve.
+             *
+             * A value of null shall indicate that the current state is not known.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.6.7.5
+             */
+            readonly currentState: Attribute<ValveState | null, any>;
+            /**
+             * Indicates the target state, while changing the state, of the valve.
+             *
+             * A value of null shall indicate that no target position is set, since the change in state is either done
+             * or failed.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.6.7.6
+             */
+            readonly targetState: Attribute<ValveState | null, any>;
+            /**
+             * Indicates any faults registered by the valve.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.6.7.10
+             */
+            readonly valveFault: OptionalAttribute<import("../schema/BitmapSchema.js").TypeFromPartialBitSchema<{
+                /**
+                 * Unspecified fault detected
+                 */
+                generalFault: BitFlag;
+                /**
+                 * Valve is blocked
+                 */
+                blocked: BitFlag;
+                /**
+                 * Valve has detected a leak
+                 */
+                leaking: BitFlag;
+                /**
+                 * No valve is connected to controller
+                 */
+                notConnected: BitFlag;
+                /**
+                 * Short circuit is detected
+                 */
+                shortCircuit: BitFlag;
+                /**
+                 * The available current has been exceeded
+                 */
+                currentExceeded: BitFlag;
+            }>, any>;
+        };
+        readonly commands: {
+            /**
+             * This command is used to set the valve to its open position.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.6.8.1
+             */
+            readonly open: Command<import("../tlv/TlvObject.js").TypeFromFields<{
+                /**
+                 * This field shall indicate the duration that the valve will remain open for this specific Open command.
+                 *
+                 * A value of null shall indicate the duration is not set, meaning that the valve will remain open until closed
+                 * by the user or some other automation.
+                 *
+                 * @see {@link MatterSpecification.v13.Cluster} § 4.6.8.1.1
+                 */
+                openDuration: import("../tlv/TlvObject.js").OptionalFieldType<number | null>;
+                /**
+                 * This field shall indicate the target level used for this specific Open command.
+                 *
+                 * @see {@link MatterSpecification.v13.Cluster} § 4.6.8.1.2
+                 */
+                targetLevel: import("../tlv/TlvObject.js").OptionalFieldType<number>;
+            }>, void, any>;
+            /**
+             * This command is used to set the valve to its closed position.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.6.8.2
+             */
+            readonly close: Command<void, void, any>;
+        };
+        readonly events: {
+            /**
+             * This event shall be generated when the valve state changed. For level changes, after the end of
+             * movement, for state changes when the new state has been reached.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.6.9.1
+             */
+            readonly valveStateChanged: OptionalEvent<import("../tlv/TlvObject.js").TypeFromFields<{
+                /**
+                 * This field shall indicate the new state of the valve.
+                 *
+                 * @see {@link MatterSpecification.v13.Cluster} § 4.6.9.1.1
+                 */
+                valveState: import("../tlv/TlvObject.js").FieldType<ValveState>;
+                /**
+                 * This field shall indicate the new level of the valve.
+                 *
+                 * @see {@link MatterSpecification.v13.Cluster} § 4.6.9.1.2
+                 */
+                valveLevel: import("../tlv/TlvObject.js").OptionalFieldType<number>;
+            }>, any>;
+            /**
+             * This event shall be generated when the valve registers or clears a fault, e.g. not being able to
+             * transition to the requested target level or state.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.6.9.2
+             */
+            readonly valveFault: OptionalEvent<import("../tlv/TlvObject.js").TypeFromFields<{
+                /**
+                 * This field shall indicate the value of the ValveFault attribute, at the time this event is generated.
+                 *
+                 * @see {@link MatterSpecification.v13.Cluster} § 4.6.9.2.1
+                 */
+                valveFault: import("../tlv/TlvObject.js").FieldType<import("../schema/BitmapSchema.js").TypeFromPartialBitSchema<{
+                    /**
+                     * Unspecified fault detected
+                     */
+                    generalFault: BitFlag;
+                    /**
+                     * Valve is blocked
+                     */
+                    blocked: BitFlag;
+                    /**
+                     * Valve has detected a leak
+                     */
+                    leaking: BitFlag;
+                    /**
+                     * No valve is connected to controller
+                     */
+                    notConnected: BitFlag;
+                    /**
+                     * Short circuit is detected
+                     */
+                    shortCircuit: BitFlag;
+                    /**
+                     * The available current has been exceeded
+                     */
+                    currentExceeded: BitFlag;
+                }>>;
+            }>, any>;
+        };
+        /**
+         * This metadata controls which ValveConfigurationAndControlCluster elements matter.js activates for specific
+         * feature combinations.
+         */
+        readonly extensions: readonly [{
+            readonly flags: {
+                readonly timeSync: true;
+            };
+            readonly component: {
+                readonly attributes: {
+                    /**
+                     * Indicates the UTC time when the valve will close, depending on value of the OpenDuration attribute.
+                     *
+                     * Null:
+                     *
+                     *   • When OpenDuration is null, or
+                     *
+                     *   • When the valve does not have a synchronized UTCTime in the Time Synchronization cluster, or
+                     *
+                     *   • When the valve is closed.
+                     *
+                     * When the value of this attribute is earlier or equal to the current UTC time, the valve shall
+                     * automatically transition to its closed position. The behavior of transitioning to the closed position,
+                     * shall match the behavior described in the Close command.
+                     *
+                     * If this attribute is not null and the Time Synchronization cluster receives a SetUTCTime command,
+                     * modifying the current UTC time of the device, the value of this attribute shall be adjusted to match the
+                     * new UTC time plus the value of the RemainingDuration attribute.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.6.7.3
+                     */
+                    readonly autoCloseTime: Attribute<number | bigint | null, any>;
+                };
+            };
+        }, {
+            readonly flags: {
+                readonly level: true;
+            };
+            readonly component: {
+                readonly attributes: {
+                    /**
+                     * Indicates the current level of the valve as a percentage value, between fully closed and fully open.
+                     * During a transition from one level to another level, the valve SHOULD keep this attribute updated to the
+                     * best of its ability, in order to represent the actual level of the valve during the movement.
+                     *
+                     * A value of 100 percent shall indicate the fully open position. A value of 0 percent shall indicate the
+                     * fully closed position.
+                     *
+                     * A value of null shall indicate that the current state is not known.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.6.7.7
+                     */
+                    readonly currentLevel: Attribute<number | null, any>;
+                    /**
+                     * Indicates the target level of the valve as a percentage value, between fully closed and fully open.
+                     *
+                     * The interpretation of the percentage value is the same as for the CurrentLevel attribute.
+                     *
+                     * A value of null shall indicate that no target position is set, since the change of level is either done
+                     * or failed.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.6.7.8
+                     */
+                    readonly targetLevel: Attribute<number | null, any>;
+                    /**
+                     * Indicates the default value used for the TargetLevel attribute, when a valve transitions from the closed
+                     * to the open state, caused by an Open command, if a TargetLevel field is not present in the Open command.
+                     *
+                     * If the LevelStep attribute is present and the value of a write interaction to this attribute field is
+                     * not 100, the value shall be a supported value as defined by the LevelStep attribute, such that (Value
+                     * received in the write interaction) % (Value of LevelStep attribute) equals 0. If the resulting value is
+                     * not 0, the requested DefaultOpenLevel value is considered an unsupported value and a CONSTRAINT_ERROR
+                     * status shall be returned.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.6.7.9
+                     */
+                    readonly defaultOpenLevel: OptionalWritableAttribute<number, any>;
+                    /**
+                     * Indicates the step size the valve can support.
+                     *
+                     * The step size defined by this attribute is counted from 0 and the final step towards 100 may be
+                     * different than what is defined in this attribute. For example, if the value of this attribute is 15, it
+                     * results in these target values being supported; 0, 15, 30, 45, 60, 75, 90 and 100.
+                     *
+                     * The values of 0 and 100 shall always be supported, regardless of the value of this attribute.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.6.7.11
+                     */
+                    readonly levelStep: OptionalFixedAttribute<number, any>;
+                };
+            };
+        }];
+    }, []>;
+    /**
+     * This cluster is used to configure a valve.
+     *
+     * ValveConfigurationAndControlCluster supports optional features that you can enable with the
+     * ValveConfigurationAndControlCluster.with() factory method.
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.6
+     */
+    interface Cluster extends Identity<typeof ClusterInstance> {
+    }
+    const Cluster: Cluster;
+    /**
+     * @see {@link Complete}
+     */
+    const CompleteInstance: MutableCluster<{
+        readonly id: import("#general").Branded<129, "ClusterId">;
+        readonly name: "ValveConfigurationAndControl";
+        readonly revision: 1;
+        readonly features: {
+            /**
+             * TimeSync
+             *
+             * This feature shall indicate that the valve uses Time Synchronization and UTC time to indicate duration
+             * and auto close time.
+             *
+             * This feature shall NOT be supported unless the device supports the Time Synchronization cluster.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.6.4.1
+             */
+            readonly timeSync: BitFlag;
+            /**
+             * Level
+             *
+             * This feature shall indicate that the valve is capable of being adjusted to a specific position, as a
+             * percentage, of its full range of motion.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.6.4.2
+             */
+            readonly level: BitFlag;
+        };
+        readonly attributes: {
+            readonly autoCloseTime: Attribute<number | bigint | null, any> & {
+                readonly optional: true;
+                readonly isConditional: true;
+                readonly optionalIf: [] | import("../cluster/Cluster.js").ConditionalFeatureList<import("../schema/BitmapSchema.js").BitSchema>;
+                readonly mandatoryIf: [] | [{
+                    timeSync: boolean;
+                }];
+            };
+            readonly currentLevel: Attribute<number | null, any> & {
+                readonly optional: true;
+                readonly isConditional: true;
+                readonly optionalIf: [] | import("../cluster/Cluster.js").ConditionalFeatureList<import("../schema/BitmapSchema.js").BitSchema>;
+                readonly mandatoryIf: [] | [{
+                    level: boolean;
+                }];
+            };
+            readonly targetLevel: Attribute<number | null, any> & {
+                readonly optional: true;
+                readonly isConditional: true;
+                readonly optionalIf: [] | import("../cluster/Cluster.js").ConditionalFeatureList<import("../schema/BitmapSchema.js").BitSchema>;
+                readonly mandatoryIf: [] | [{
+                    level: boolean;
+                }];
+            };
+            readonly defaultOpenLevel: OptionalWritableAttribute<number, any> & {
+                readonly optional: true;
+                readonly isConditional: true;
+                readonly optionalIf: [] | [{
+                    level: boolean;
+                }];
+                readonly mandatoryIf: [] | import("../cluster/Cluster.js").ConditionalFeatureList<import("../schema/BitmapSchema.js").BitSchema>;
+            };
+            readonly levelStep: OptionalFixedAttribute<number, any> & {
+                readonly optional: true;
+                readonly isConditional: true;
+                readonly optionalIf: [] | [{
+                    level: boolean;
+                }];
+                readonly mandatoryIf: [] | import("../cluster/Cluster.js").ConditionalFeatureList<import("../schema/BitmapSchema.js").BitSchema>;
+            };
+            readonly openDuration: Attribute<number | null, any>;
+            readonly defaultOpenDuration: WritableAttribute<number | null, any>;
+            readonly remainingDuration: Attribute<number | null, any>;
+            readonly currentState: Attribute<ValveState | null, any>;
+            readonly targetState: Attribute<ValveState | null, any>;
+            readonly valveFault: OptionalAttribute<import("../schema/BitmapSchema.js").TypeFromPartialBitSchema<{
+                /**
+                 * Unspecified fault detected
+                 */
+                generalFault: BitFlag;
+                /**
+                 * Valve is blocked
+                 */
+                blocked: BitFlag;
+                /**
+                 * Valve has detected a leak
+                 */
+                leaking: BitFlag;
+                /**
+                 * No valve is connected to controller
+                 */
+                notConnected: BitFlag;
+                /**
+                 * Short circuit is detected
+                 */
+                shortCircuit: BitFlag;
+                /**
+                 * The available current has been exceeded
+                 */
+                currentExceeded: BitFlag;
+            }>, any>;
+            readonly clusterRevision: Attribute<number, never>;
+            readonly featureMap: Attribute<import("../schema/BitmapSchema.js").TypeFromPartialBitSchema<{
+                /**
+                 * TimeSync
+                 *
+                 * This feature shall indicate that the valve uses Time Synchronization and UTC time to indicate duration
+                 * and auto close time.
+                 *
+                 * This feature shall NOT be supported unless the device supports the Time Synchronization cluster.
+                 *
+                 * @see {@link MatterSpecification.v13.Cluster} § 4.6.4.1
+                 */
+                readonly timeSync: BitFlag;
+                /**
+                 * Level
+                 *
+                 * This feature shall indicate that the valve is capable of being adjusted to a specific position, as a
+                 * percentage, of its full range of motion.
+                 *
+                 * @see {@link MatterSpecification.v13.Cluster} § 4.6.4.2
+                 */
+                readonly level: BitFlag;
+            }>, never>;
+            readonly attributeList: Attribute<import("../index.js").AttributeId[], never>;
+            readonly eventList: Attribute<import("../index.js").EventId[], never>;
+            readonly acceptedCommandList: Attribute<import("../index.js").CommandId[], never>;
+            readonly generatedCommandList: Attribute<import("../index.js").CommandId[], never>;
+        };
+        readonly commands: {
+            /**
+             * This command is used to set the valve to its open position.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.6.8.1
+             */
+            readonly open: Command<import("../tlv/TlvObject.js").TypeFromFields<{
+                /**
+                 * This field shall indicate the duration that the valve will remain open for this specific Open command.
+                 *
+                 * A value of null shall indicate the duration is not set, meaning that the valve will remain open until closed
+                 * by the user or some other automation.
+                 *
+                 * @see {@link MatterSpecification.v13.Cluster} § 4.6.8.1.1
+                 */
+                openDuration: import("../tlv/TlvObject.js").OptionalFieldType<number | null>;
+                /**
+                 * This field shall indicate the target level used for this specific Open command.
+                 *
+                 * @see {@link MatterSpecification.v13.Cluster} § 4.6.8.1.2
+                 */
+                targetLevel: import("../tlv/TlvObject.js").OptionalFieldType<number>;
+            }>, void, any>;
+            /**
+             * This command is used to set the valve to its closed position.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.6.8.2
+             */
+            readonly close: Command<void, void, any>;
+        };
+        readonly events: {
+            /**
+             * This event shall be generated when the valve state changed. For level changes, after the end of
+             * movement, for state changes when the new state has been reached.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.6.9.1
+             */
+            readonly valveStateChanged: OptionalEvent<import("../tlv/TlvObject.js").TypeFromFields<{
+                /**
+                 * This field shall indicate the new state of the valve.
+                 *
+                 * @see {@link MatterSpecification.v13.Cluster} § 4.6.9.1.1
+                 */
+                valveState: import("../tlv/TlvObject.js").FieldType<ValveState>;
+                /**
+                 * This field shall indicate the new level of the valve.
+                 *
+                 * @see {@link MatterSpecification.v13.Cluster} § 4.6.9.1.2
+                 */
+                valveLevel: import("../tlv/TlvObject.js").OptionalFieldType<number>;
+            }>, any>;
+            /**
+             * This event shall be generated when the valve registers or clears a fault, e.g. not being able to
+             * transition to the requested target level or state.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.6.9.2
+             */
+            readonly valveFault: OptionalEvent<import("../tlv/TlvObject.js").TypeFromFields<{
+                /**
+                 * This field shall indicate the value of the ValveFault attribute, at the time this event is generated.
+                 *
+                 * @see {@link MatterSpecification.v13.Cluster} § 4.6.9.2.1
+                 */
+                valveFault: import("../tlv/TlvObject.js").FieldType<import("../schema/BitmapSchema.js").TypeFromPartialBitSchema<{
+                    /**
+                     * Unspecified fault detected
+                     */
+                    generalFault: BitFlag;
+                    /**
+                     * Valve is blocked
+                     */
+                    blocked: BitFlag;
+                    /**
+                     * Valve has detected a leak
+                     */
+                    leaking: BitFlag;
+                    /**
+                     * No valve is connected to controller
+                     */
+                    notConnected: BitFlag;
+                    /**
+                     * Short circuit is detected
+                     */
+                    shortCircuit: BitFlag;
+                    /**
+                     * The available current has been exceeded
+                     */
+                    currentExceeded: BitFlag;
+                }>>;
+            }>, any>;
+        };
+    }, []>;
+    /**
+     * This cluster supports all ValveConfigurationAndControl features. It may support illegal feature combinations.
+     *
+     * If you use this cluster you must manually specify which features are active and ensure the set of active
+     * features is legal per the Matter specification.
+     */
+    interface Complete extends Identity<typeof CompleteInstance> {
+    }
+    const Complete: Complete;
+}
+export type ValveConfigurationAndControlCluster = ValveConfigurationAndControl.Cluster;
+export declare const ValveConfigurationAndControlCluster: ValveConfigurationAndControl.Cluster;
+//# sourceMappingURL=valve-configuration-and-control.d.ts.map