@matter/types 0.11.0-alpha.0-20241005-e3e4e4a7a

package/dist/esm/clusters/pump-configuration-and-control.js

@@ -0,0 +1,739 @@
+/**
+ * @license
+ * Copyright 2022-2024 Matter.js Authors
+ * SPDX-License-Identifier: Apache-2.0
+ */
+import { MutableCluster } from "../cluster/mutation/MutableCluster.js";
+import {
+  FixedAttribute,
+  OptionalFixedAttribute,
+  OptionalAttribute,
+  Attribute,
+  OptionalWritableAttribute,
+  WritableAttribute,
+  OptionalEvent,
+  EventPriority
+} from "../cluster/Cluster.js";
+import { TlvInt16, TlvUInt16, TlvBitmap, TlvEnum, TlvUInt24, TlvUInt32 } from "../tlv/TlvNumber.js";
+import { TlvNullable } from "../tlv/TlvNullable.js";
+import { BitFlag } from "../schema/BitmapSchema.js";
+import { AccessLevel } from "#model";
+import { TlvNoArguments } from "../tlv/TlvNoArguments.js";
+import { ClusterRegistry } from "../cluster/ClusterRegistry.js";
+var PumpConfigurationAndControl;
+((PumpConfigurationAndControl2) => {
+  let Feature;
+  ((Feature2) => {
+    Feature2["ConstantPressure"] = "ConstantPressure";
+    Feature2["CompensatedPressure"] = "CompensatedPressure";
+    Feature2["ConstantFlow"] = "ConstantFlow";
+    Feature2["ConstantSpeed"] = "ConstantSpeed";
+    Feature2["ConstantTemperature"] = "ConstantTemperature";
+    Feature2["Automatic"] = "Automatic";
+    Feature2["LocalOperation"] = "LocalOperation";
+  })(Feature = PumpConfigurationAndControl2.Feature || (PumpConfigurationAndControl2.Feature = {}));
+  PumpConfigurationAndControl2.PumpStatus = {
+    /**
+     * A fault related to the system or pump device is detected.
+     *
+     * If this bit is set, it may correspond to an event in the range 2-16, see Events.
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.2.6.1.1
+     */
+    deviceFault: BitFlag(0),
+    /**
+     * A fault related to the supply to the pump is detected.
+     *
+     * If this bit is set, it may correspond to an event in the range 0-1 or 13, see Events.
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.2.6.1.2
+     */
+    supplyFault: BitFlag(1),
+    /**
+     * Setpoint is too low to achieve.
+     */
+    speedLow: BitFlag(2),
+    /**
+     * Setpoint is too high to achieve.
+     */
+    speedHigh: BitFlag(3),
+    /**
+     * Device control is overridden by hardware, such as an external STOP button or via a local HMI.
+     *
+     * While this bit is set, the EffectiveOperationMode is adjusted to Local. Any request changing OperationMode
+     * shall generate a FAILURE error status until LocalOverride is cleared on the physical device. When
+     * LocalOverride is cleared, the device shall return to the operation mode set in OperationMode.
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.2.6.1.3
+     */
+    localOverride: BitFlag(4),
+    /**
+     * Pump is currently running
+     */
+    running: BitFlag(5),
+    /**
+     * A remote pressure sensor is used as the sensor for the regulation of the pump.
+     *
+     * If this bit is set, EffectiveControlMode is ConstantPressure and the setpoint for the pump is interpreted as
+     * a percentage of the range of the remote sensor ([MinMeasuredValue – MaxMeasuredValue]).
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.2.6.1.4
+     */
+    remotePressure: BitFlag(6),
+    /**
+     * A remote flow sensor is used as the sensor for the regulation of the pump.
+     *
+     * If this bit is set, EffectiveControlMode is ConstantFlow, and the setpoint for the pump is interpreted as a
+     * percentage of the range of the remote sensor ([MinMeasuredValue – MaxMeasuredValue]).
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.2.6.1.5
+     */
+    remoteFlow: BitFlag(7),
+    /**
+     * A remote temperature sensor is used as the sensor for the regulation of the pump.
+     *
+     * If this bit is set, EffectiveControlMode is ConstantTemperature, and the setpoint for the pump is
+     * interpreted as a percentage of the range of the remote sensor ([MinMeasuredValue – MaxMeasuredValue])
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.2.6.1.6
+     */
+    remoteTemperature: BitFlag(8)
+  };
+  let OperationMode;
+  ((OperationMode2) => {
+    OperationMode2[OperationMode2["Normal"] = 0] = "Normal";
+    OperationMode2[OperationMode2["Minimum"] = 1] = "Minimum";
+    OperationMode2[OperationMode2["Maximum"] = 2] = "Maximum";
+    OperationMode2[OperationMode2["Local"] = 3] = "Local";
+  })(OperationMode = PumpConfigurationAndControl2.OperationMode || (PumpConfigurationAndControl2.OperationMode = {}));
+  let ControlMode;
+  ((ControlMode2) => {
+    ControlMode2[ControlMode2["ConstantSpeed"] = 0] = "ConstantSpeed";
+    ControlMode2[ControlMode2["ConstantPressure"] = 1] = "ConstantPressure";
+    ControlMode2[ControlMode2["ProportionalPressure"] = 2] = "ProportionalPressure";
+    ControlMode2[ControlMode2["ConstantFlow"] = 3] = "ConstantFlow";
+    ControlMode2[ControlMode2["ConstantTemperature"] = 5] = "ConstantTemperature";
+    ControlMode2[ControlMode2["Automatic"] = 7] = "Automatic";
+  })(ControlMode = PumpConfigurationAndControl2.ControlMode || (PumpConfigurationAndControl2.ControlMode = {}));
+  PumpConfigurationAndControl2.ConstantPressureComponent = MutableCluster.Component({
+    attributes: {
+      /**
+       * This attribute specifies the minimum pressure the pump can achieve when it is working with the
+       * ControlMode attribute set to ConstantPressure.
+       *
+       * Valid range is –3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.4
+       */
+      minConstPressure: FixedAttribute(3, TlvNullable(TlvInt16), { default: null }),
+      /**
+       * This attribute specifies the maximum pressure the pump can achieve when it is working with the
+       * ControlMode attribute set to ConstantPressure.
+       *
+       * Valid range is –3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.5
+       */
+      maxConstPressure: FixedAttribute(4, TlvNullable(TlvInt16), { default: null })
+    }
+  });
+  PumpConfigurationAndControl2.AutomaticComponent = MutableCluster.Component({
+    attributes: {
+      /**
+       * This attribute specifies the minimum pressure the pump can achieve when it is working with the
+       * ControlMode attribute set to ConstantPressure.
+       *
+       * Valid range is –3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.4
+       */
+      minConstPressure: OptionalFixedAttribute(3, TlvNullable(TlvInt16), { default: null }),
+      /**
+       * This attribute specifies the maximum pressure the pump can achieve when it is working with the
+       * ControlMode attribute set to ConstantPressure.
+       *
+       * Valid range is –3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.5
+       */
+      maxConstPressure: OptionalFixedAttribute(4, TlvNullable(TlvInt16), { default: null }),
+      /**
+       * This attribute specifies the minimum compensated pressure the pump can achieve when it is working with
+       * the ControlMode attribute set to ProportionalPressure.
+       *
+       * Valid range is –3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.6
+       */
+      minCompPressure: OptionalFixedAttribute(5, TlvNullable(TlvInt16), { default: null }),
+      /**
+       * This attribute specifies the maximum compensated pressure the pump can achieve when it is working with
+       * the ControlMode attribute set to ProportionalPressure.
+       *
+       * Valid range is –3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.7
+       */
+      maxCompPressure: OptionalFixedAttribute(6, TlvNullable(TlvInt16), { default: null }),
+      /**
+       * This attribute specifies the minimum speed the pump can achieve when it is working with the ControlMode
+       * attribute set to ConstantSpeed.
+       *
+       * Valid range is 0 to 65,534 RPM (steps of 1 RPM). Null if the value is invalid.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.8
+       */
+      minConstSpeed: OptionalFixedAttribute(7, TlvNullable(TlvUInt16), { default: null }),
+      /**
+       * This attribute specifies the maximum speed the pump can achieve when it is working with the ControlMode
+       * attribute set to ConstantSpeed.
+       *
+       * Valid range is 0 to 65,534 RPM (steps of 1 RPM). Null if the value is invalid.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.9
+       */
+      maxConstSpeed: OptionalFixedAttribute(8, TlvNullable(TlvUInt16), { default: null }),
+      /**
+       * This attribute specifies the minimum flow the pump can achieve when it is working with the Con
+       *
+       * trolMode attribute set to ConstantFlow.
+       *
+       * Valid range is 0 m/h to 6,553.4 m/h (steps of 0.1 m/h). Null if the value is invalid.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.10
+       */
+      minConstFlow: OptionalFixedAttribute(9, TlvNullable(TlvUInt16), { default: null }),
+      /**
+       * This attribute specifies the maximum flow the pump can achieve when it is working with the ControlMode
+       * attribute set to ConstantFlow.
+       *
+       * Valid range is 0 m/h to 6,553.4 m/h (steps of 0.1 m/h). Null if the value is invalid.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.11
+       */
+      maxConstFlow: OptionalFixedAttribute(10, TlvNullable(TlvUInt16), { default: null }),
+      /**
+       * This attribute specifies the minimum temperature the pump can maintain in the system when it is working
+       * with the ControlMode attribute set to ConstantTemperature.
+       *
+       * Valid range is –273.15 °C to 327.67 °C (steps of 0.01 °C). Null if the value is invalid.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.12
+       */
+      minConstTemp: OptionalFixedAttribute(11, TlvNullable(TlvInt16.bound({ min: -27315 })), { default: null }),
+      /**
+       * This attribute specifies the maximum temperature the pump can maintain in the system when it is working
+       * with the ControlMode attribute set to ConstantTemperature.
+       *
+       * MaxConstTemp shall be greater than or equal to MinConstTemp
+       *
+       * Valid range is –273.15 °C to 327.67 °C (steps of 0.01 °C). Null if the value is invalid.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.13
+       */
+      maxConstTemp: OptionalFixedAttribute(12, TlvNullable(TlvInt16.bound({ min: -27315 })), { default: null })
+    }
+  });
+  PumpConfigurationAndControl2.CompensatedPressureComponent = MutableCluster.Component({
+    attributes: {
+      /**
+       * This attribute specifies the minimum compensated pressure the pump can achieve when it is working with
+       * the ControlMode attribute set to ProportionalPressure.
+       *
+       * Valid range is –3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.6
+       */
+      minCompPressure: FixedAttribute(5, TlvNullable(TlvInt16), { default: null }),
+      /**
+       * This attribute specifies the maximum compensated pressure the pump can achieve when it is working with
+       * the ControlMode attribute set to ProportionalPressure.
+       *
+       * Valid range is –3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.7
+       */
+      maxCompPressure: FixedAttribute(6, TlvNullable(TlvInt16), { default: null })
+    }
+  });
+  PumpConfigurationAndControl2.ConstantSpeedComponent = MutableCluster.Component({
+    attributes: {
+      /**
+       * This attribute specifies the minimum speed the pump can achieve when it is working with the ControlMode
+       * attribute set to ConstantSpeed.
+       *
+       * Valid range is 0 to 65,534 RPM (steps of 1 RPM). Null if the value is invalid.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.8
+       */
+      minConstSpeed: FixedAttribute(7, TlvNullable(TlvUInt16), { default: null }),
+      /**
+       * This attribute specifies the maximum speed the pump can achieve when it is working with the ControlMode
+       * attribute set to ConstantSpeed.
+       *
+       * Valid range is 0 to 65,534 RPM (steps of 1 RPM). Null if the value is invalid.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.9
+       */
+      maxConstSpeed: FixedAttribute(8, TlvNullable(TlvUInt16), { default: null })
+    }
+  });
+  PumpConfigurationAndControl2.ConstantFlowComponent = MutableCluster.Component({
+    attributes: {
+      /**
+       * This attribute specifies the minimum flow the pump can achieve when it is working with the Con
+       *
+       * trolMode attribute set to ConstantFlow.
+       *
+       * Valid range is 0 m/h to 6,553.4 m/h (steps of 0.1 m/h). Null if the value is invalid.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.10
+       */
+      minConstFlow: FixedAttribute(9, TlvNullable(TlvUInt16), { default: null }),
+      /**
+       * This attribute specifies the maximum flow the pump can achieve when it is working with the ControlMode
+       * attribute set to ConstantFlow.
+       *
+       * Valid range is 0 m/h to 6,553.4 m/h (steps of 0.1 m/h). Null if the value is invalid.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.11
+       */
+      maxConstFlow: FixedAttribute(10, TlvNullable(TlvUInt16), { default: null })
+    }
+  });
+  PumpConfigurationAndControl2.ConstantTemperatureComponent = MutableCluster.Component({
+    attributes: {
+      /**
+       * This attribute specifies the minimum temperature the pump can maintain in the system when it is working
+       * with the ControlMode attribute set to ConstantTemperature.
+       *
+       * Valid range is –273.15 °C to 327.67 °C (steps of 0.01 °C). Null if the value is invalid.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.12
+       */
+      minConstTemp: FixedAttribute(11, TlvNullable(TlvInt16.bound({ min: -27315 })), { default: null }),
+      /**
+       * This attribute specifies the maximum temperature the pump can maintain in the system when it is working
+       * with the ControlMode attribute set to ConstantTemperature.
+       *
+       * MaxConstTemp shall be greater than or equal to MinConstTemp
+       *
+       * Valid range is –273.15 °C to 327.67 °C (steps of 0.01 °C). Null if the value is invalid.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.13
+       */
+      maxConstTemp: FixedAttribute(12, TlvNullable(TlvInt16.bound({ min: -27315 })), { default: null })
+    }
+  });
+  PumpConfigurationAndControl2.Base = MutableCluster.Component({
+    id: 512,
+    name: "PumpConfigurationAndControl",
+    revision: 4,
+    features: {
+      /**
+       * ConstantPressure
+       *
+       * Supports operating in constant pressure mode
+       */
+      constantPressure: BitFlag(0),
+      /**
+       * CompensatedPressure
+       *
+       * Supports operating in compensated pressure mode
+       */
+      compensatedPressure: BitFlag(1),
+      /**
+       * ConstantFlow
+       *
+       * Supports operating in constant flow mode
+       */
+      constantFlow: BitFlag(2),
+      /**
+       * ConstantSpeed
+       *
+       * Supports operating in constant speed mode
+       */
+      constantSpeed: BitFlag(3),
+      /**
+       * ConstantTemperature
+       *
+       * Supports operating in constant temperature mode
+       */
+      constantTemperature: BitFlag(4),
+      /**
+       * Automatic
+       *
+       * Supports operating in automatic mode
+       */
+      automatic: BitFlag(5),
+      /**
+       * LocalOperation
+       *
+       * Supports operating using local settings
+       */
+      localOperation: BitFlag(6)
+    },
+    attributes: {
+      /**
+       * This attribute specifies the maximum pressure the pump can achieve. It is a physical limit, and does not
+       * apply to any specific control mode or operation mode.
+       *
+       * Valid range is -3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.1
+       */
+      maxPressure: FixedAttribute(0, TlvNullable(TlvInt16), { default: null }),
+      /**
+       * This attribute specifies the maximum speed the pump can achieve. It is a physical limit, and does not
+       * apply to any specific control mode or operation mode.
+       *
+       * Valid range is 0 to 65,534 RPM (steps of 1 RPM). Null if the value is invalid.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.2
+       */
+      maxSpeed: FixedAttribute(1, TlvNullable(TlvUInt16), { default: null }),
+      /**
+       * This attribute specifies the maximum flow the pump can achieve. It is a physical limit, and does not
+       * apply to any specific control mode or operation mode.
+       *
+       * Valid range is 0 m/h to 6,553.4 m/h (steps of 0.1 m/h). Null if the value is invalid.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.3
+       */
+      maxFlow: FixedAttribute(2, TlvNullable(TlvUInt16), { default: null }),
+      /**
+       * This attribute specifies the activity status of the pump functions as listed in PumpStatusBitmap. Where
+       * a pump controller function is active, the corresponding bit shall be set to 1. Where a pump controller
+       * function is not active, the corresponding bit shall be set to 0.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.14
+       */
+      pumpStatus: OptionalAttribute(16, TlvBitmap(TlvUInt16, PumpConfigurationAndControl2.PumpStatus)),
+      /**
+       * This attribute specifies current effective operation mode of the pump as defined in OperationModeEnum.
+       *
+       * The value of the EffectiveOperationMode attribute is the same as the OperationMode attribute, unless one
+       * of the following points are true:
+       *
+       *   • The pump is physically set to run with the local settings
+       *
+       *   • The LocalOverride bit in the PumpStatus attribute is set,
+       *
+       * See OperationMode and ControlMode attributes for a detailed description of the operation and control of
+       * the pump.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.15
+       */
+      effectiveOperationMode: Attribute(17, TlvEnum(), { persistent: true }),
+      /**
+       * This attribute specifies the current effective control mode of the pump as defined in ControlModeEnum.
+       *
+       * This attribute contains the control mode that currently applies to the pump. It will have the value of
+       * the ControlMode attribute, unless one of the following points are true:
+       *
+       *   • The ControlMode attribute is set to Automatic. In this case, the value of the EffectiveControlMode
+       *     shall match the behavior of the pump.
+       *
+       *   • A remote sensor is used as the sensor for regulation of the pump. In this case, EffectiveControlMode
+       *     will display ConstantPressure, ConstantFlow or ConstantTemperature if the remote sensor is a
+       *     pressure sensor, a flow sensor or a temperature sensor respectively, regardless of the value of the
+       *     ControlMode attribute.
+       *
+       * In case the ControlMode attribute is not included on the device and no remote sensors are connected, the
+       * value of the EffectiveControlMode shall match the vendor-specific behavior of the pump.
+       *
+       * See OperationMode and ControlMode attributes for detailed a description of the operation and control of
+       * the pump.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.16
+       */
+      effectiveControlMode: Attribute(18, TlvEnum(), { persistent: true }),
+      /**
+       * This attribute specifies the actual capacity of the pump as a percentage of the effective maximum
+       * setpoint value. It is updated dynamically as the speed of the pump changes.
+       *
+       * If the value is not available (the measurement or estimation of the speed is done in the pump), this
+       * attribute will indicate the null value.
+       *
+       * Valid range is 0 % to 163.835% (0.005 % granularity). Although this attribute is a signed value, values
+       * of capacity less than zero have no physical meaning.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.17
+       */
+      capacity: Attribute(19, TlvNullable(TlvInt16), { default: null }),
+      /**
+       * This attribute specifies the actual speed of the pump measured in RPM. It is updated dynamically as the
+       * speed of the pump changes.
+       *
+       * If the value is not available (the measurement or estimation of the speed is done in the pump), this
+       * attribute will indicate the null value.
+       *
+       * Valid range is 0 to 65.534 RPM.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.18
+       */
+      speed: OptionalAttribute(20, TlvNullable(TlvUInt16), { default: null }),
+      /**
+       * This attribute specifies the accumulated number of hours that the pump has been powered and the motor
+       * has been running. It is updated dynamically as it increases. It is preserved over power cycles of the
+       * pump. If LifeTimeRunningHours rises above maximum value it “rolls over” and starts at 0 (zero).
+       *
+       * This attribute is writeable, in order to allow setting to an appropriate value after maintenance. If
+       *
+       * the value is not available, this attribute will indicate the null value. Valid range is 0 to 16,777,214
+       * hrs.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.19
+       */
+      lifetimeRunningHours: OptionalWritableAttribute(
+        21,
+        TlvNullable(TlvUInt24),
+        { persistent: true, default: 0, writeAcl: AccessLevel.Manage }
+      ),
+      /**
+       * This attribute specifies the actual power consumption of the pump in Watts. The value of this attribute
+       * is updated dynamically as the power consumption of the pump changes.
+       *
+       * This attribute is read only. If the value is not available (the measurement of power consumption is not
+       * done in the pump), this attribute will indicate the null value.
+       *
+       * Valid range is 0 to 16,777,214 Watts.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.20
+       */
+      power: OptionalAttribute(22, TlvNullable(TlvUInt24), { default: null }),
+      /**
+       * This attribute specifies the accumulated energy consumption of the pump through the entire lifetime of
+       * the pump in kWh. The value of the LifetimeEnergyConsumed attribute is updated dynamically as the energy
+       * consumption of the pump increases. If LifetimeEnergyConsumed rises above maximum value it “rolls over”
+       * and starts at 0 (zero).
+       *
+       * This attribute is writeable, in order to allow setting to an appropriate value after maintenance.
+       *
+       * Valid range is 0 kWh to 4,294,967,294 kWh.
+       *
+       * Null if the value is unknown.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.21
+       */
+      lifetimeEnergyConsumed: OptionalWritableAttribute(
+        23,
+        TlvNullable(TlvUInt32),
+        { persistent: true, default: 0, writeAcl: AccessLevel.Manage }
+      ),
+      /**
+       * This attribute specifies the operation mode of the pump as defined in OperationModeEnum.
+       *
+       * The actual operating mode of the pump is a result of the setting of the attributes OperationMode,
+       * ControlMode and the optional connection of a remote sensor. The operation and control is prioritized as
+       * shown in the scheme below:
+       *
+       * Priority Scheme of Pump Operation and Control
+       *
+       * If this attribute is Maximum, Minimum or Local, the OperationMode attribute decides how the pump is
+       * operated.
+       *
+       * If this attribute is Normal and a remote sensor is connected to the pump, the type of the remote sensor
+       * decides the control mode of the pump. A connected remote pressure sensor will make the pump run in
+       * control mode Constant pressure and vice versa for flow and temperature type sensors. This is regardless
+       * of the setting of the ControlMode attribute.
+       *
+       * If this attribute is Normal and no remote sensor is connected, the control mode of the pump is decided
+       * by the ControlMode attribute.
+       *
+       * OperationMode may be changed at any time, even when the pump is running. The behavior of the pump at the
+       * point of changing the value of this attribute is vendor-specific.
+       *
+       * In the case a device does not support a specific operation mode, the write interaction to this attribute
+       * with an unsupported operation mode value shall be ignored and a response containing the status of
+       * CONSTRAINT_ERROR shall be returned.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.22
+       */
+      operationMode: WritableAttribute(
+        32,
+        TlvEnum(),
+        { persistent: true, default: 0 /* Normal */, writeAcl: AccessLevel.Manage }
+      ),
+      /**
+       * This attribute specifies the control mode of the pump as defined in ControlModeEnum.
+       *
+       * See the OperationMode attribute for a detailed description of the operation and control of the
+       *
+       * pump.
+       *
+       * ControlMode may be changed at any time, even when the pump is running. The behavior of the pump at the
+       * point of changing is vendor-specific.
+       *
+       * In the case a device does not support a specific control mode, the write interaction to this attribute
+       * with an unsupported control mode value shall be ignored and a response containing the status of
+       * CONSTRAINT_ERROR shall be returned.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.23
+       */
+      controlMode: OptionalWritableAttribute(
+        33,
+        TlvEnum(),
+        { persistent: true, default: 0 /* ConstantSpeed */, writeAcl: AccessLevel.Manage }
+      )
+    },
+    events: {
+      /**
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+       */
+      supplyVoltageLow: OptionalEvent(0, EventPriority.Info, TlvNoArguments),
+      /**
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+       */
+      supplyVoltageHigh: OptionalEvent(1, EventPriority.Info, TlvNoArguments),
+      /**
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+       */
+      powerMissingPhase: OptionalEvent(2, EventPriority.Info, TlvNoArguments),
+      /**
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+       */
+      systemPressureLow: OptionalEvent(3, EventPriority.Info, TlvNoArguments),
+      /**
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+       */
+      systemPressureHigh: OptionalEvent(4, EventPriority.Info, TlvNoArguments),
+      /**
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+       */
+      dryRunning: OptionalEvent(5, EventPriority.Critical, TlvNoArguments),
+      /**
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+       */
+      motorTemperatureHigh: OptionalEvent(6, EventPriority.Info, TlvNoArguments),
+      /**
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+       */
+      pumpMotorFatalFailure: OptionalEvent(7, EventPriority.Critical, TlvNoArguments),
+      /**
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+       */
+      electronicTemperatureHigh: OptionalEvent(8, EventPriority.Info, TlvNoArguments),
+      /**
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+       */
+      pumpBlocked: OptionalEvent(9, EventPriority.Critical, TlvNoArguments),
+      /**
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+       */
+      sensorFailure: OptionalEvent(10, EventPriority.Info, TlvNoArguments),
+      /**
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+       */
+      electronicNonFatalFailure: OptionalEvent(11, EventPriority.Info, TlvNoArguments),
+      /**
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+       */
+      electronicFatalFailure: OptionalEvent(12, EventPriority.Critical, TlvNoArguments),
+      /**
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+       */
+      generalFault: OptionalEvent(13, EventPriority.Info, TlvNoArguments),
+      /**
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+       */
+      leakage: OptionalEvent(14, EventPriority.Info, TlvNoArguments),
+      /**
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+       */
+      airDetection: OptionalEvent(15, EventPriority.Info, TlvNoArguments),
+      /**
+       * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+       */
+      turbineOperation: OptionalEvent(16, EventPriority.Info, TlvNoArguments)
+    },
+    /**
+     * This metadata controls which PumpConfigurationAndControlCluster elements matter.js activates for specific
+     * feature combinations.
+     */
+    extensions: MutableCluster.Extensions(
+      { flags: { constantPressure: true }, component: PumpConfigurationAndControl2.ConstantPressureComponent },
+      { flags: { automatic: true }, component: PumpConfigurationAndControl2.AutomaticComponent },
+      { flags: { compensatedPressure: true }, component: PumpConfigurationAndControl2.CompensatedPressureComponent },
+      { flags: { constantSpeed: true }, component: PumpConfigurationAndControl2.ConstantSpeedComponent },
+      { flags: { constantFlow: true }, component: PumpConfigurationAndControl2.ConstantFlowComponent },
+      { flags: { constantTemperature: true }, component: PumpConfigurationAndControl2.ConstantTemperatureComponent },
+      {
+        flags: {
+          constantPressure: false,
+          compensatedPressure: false,
+          constantFlow: false,
+          constantSpeed: false,
+          constantTemperature: false
+        },
+        component: false
+      }
+    )
+  });
+  PumpConfigurationAndControl2.ClusterInstance = MutableCluster.ExtensibleOnly(PumpConfigurationAndControl2.Base);
+  PumpConfigurationAndControl2.Cluster = PumpConfigurationAndControl2.ClusterInstance;
+  const PRSCONST = { constantPressure: true };
+  const AUTO = { automatic: true };
+  const PRSCOMP = { compensatedPressure: true };
+  const SPD = { constantSpeed: true };
+  const FLW = { constantFlow: true };
+  const TEMP = { constantTemperature: true };
+  PumpConfigurationAndControl2.CompleteInstance = MutableCluster({
+    id: PumpConfigurationAndControl2.Base.id,
+    name: PumpConfigurationAndControl2.Base.name,
+    revision: PumpConfigurationAndControl2.Base.revision,
+    features: PumpConfigurationAndControl2.Base.features,
+    attributes: {
+      ...PumpConfigurationAndControl2.Base.attributes,
+      minConstPressure: MutableCluster.AsConditional(
+        PumpConfigurationAndControl2.ConstantPressureComponent.attributes.minConstPressure,
+        { mandatoryIf: [PRSCONST], optionalIf: [AUTO] }
+      ),
+      maxConstPressure: MutableCluster.AsConditional(
+        PumpConfigurationAndControl2.ConstantPressureComponent.attributes.maxConstPressure,
+        { mandatoryIf: [PRSCONST], optionalIf: [AUTO] }
+      ),
+      minCompPressure: MutableCluster.AsConditional(
+        PumpConfigurationAndControl2.AutomaticComponent.attributes.minCompPressure,
+        { optionalIf: [AUTO], mandatoryIf: [PRSCOMP] }
+      ),
+      maxCompPressure: MutableCluster.AsConditional(
+        PumpConfigurationAndControl2.AutomaticComponent.attributes.maxCompPressure,
+        { optionalIf: [AUTO], mandatoryIf: [PRSCOMP] }
+      ),
+      minConstSpeed: MutableCluster.AsConditional(
+        PumpConfigurationAndControl2.AutomaticComponent.attributes.minConstSpeed,
+        { optionalIf: [AUTO], mandatoryIf: [SPD] }
+      ),
+      maxConstSpeed: MutableCluster.AsConditional(
+        PumpConfigurationAndControl2.AutomaticComponent.attributes.maxConstSpeed,
+        { optionalIf: [AUTO], mandatoryIf: [SPD] }
+      ),
+      minConstFlow: MutableCluster.AsConditional(
+        PumpConfigurationAndControl2.AutomaticComponent.attributes.minConstFlow,
+        { optionalIf: [AUTO], mandatoryIf: [FLW] }
+      ),
+      maxConstFlow: MutableCluster.AsConditional(
+        PumpConfigurationAndControl2.AutomaticComponent.attributes.maxConstFlow,
+        { optionalIf: [AUTO], mandatoryIf: [FLW] }
+      ),
+      minConstTemp: MutableCluster.AsConditional(
+        PumpConfigurationAndControl2.AutomaticComponent.attributes.minConstTemp,
+        { optionalIf: [AUTO], mandatoryIf: [TEMP] }
+      ),
+      maxConstTemp: MutableCluster.AsConditional(
+        PumpConfigurationAndControl2.AutomaticComponent.attributes.maxConstTemp,
+        { optionalIf: [AUTO], mandatoryIf: [TEMP] }
+      )
+    },
+    events: PumpConfigurationAndControl2.Base.events
+  });
+  PumpConfigurationAndControl2.Complete = PumpConfigurationAndControl2.CompleteInstance;
+})(PumpConfigurationAndControl || (PumpConfigurationAndControl = {}));
+const PumpConfigurationAndControlCluster = PumpConfigurationAndControl.Cluster;
+ClusterRegistry.register(PumpConfigurationAndControl.Complete);
+export {
+  PumpConfigurationAndControl,
+  PumpConfigurationAndControlCluster
+};
+//# sourceMappingURL=pump-configuration-and-control.js.map