@matter/types 0.11.0-alpha.0-20241005-e3e4e4a7a

package/dist/esm/clusters/network-commissioning.js

@@ -0,0 +1,1006 @@
+/**
+ * @license
+ * Copyright 2022-2024 Matter.js Authors
+ * SPDX-License-Identifier: Apache-2.0
+ */
+import { MutableCluster } from "../cluster/mutation/MutableCluster.js";
+import { FixedAttribute, Command, Attribute, WritableAttribute } from "../cluster/Cluster.js";
+import { TlvUInt8, TlvUInt64, TlvEnum, TlvBitmap, TlvUInt16, TlvInt8, TlvInt32 } from "../tlv/TlvNumber.js";
+import { TlvOptionalField, TlvObject, TlvField } from "../tlv/TlvObject.js";
+import { TlvByteString, TlvString } from "../tlv/TlvString.js";
+import { TlvNullable } from "../tlv/TlvNullable.js";
+import { TlvArray } from "../tlv/TlvArray.js";
+import { BitFlag } from "../schema/BitmapSchema.js";
+import { AccessLevel } from "#model";
+import { TlvBoolean } from "../tlv/TlvBoolean.js";
+import { ClusterRegistry } from "../cluster/ClusterRegistry.js";
+var NetworkCommissioning;
+((NetworkCommissioning2) => {
+  let Feature;
+  ((Feature2) => {
+    Feature2["WiFiNetworkInterface"] = "WiFiNetworkInterface";
+    Feature2["ThreadNetworkInterface"] = "ThreadNetworkInterface";
+    Feature2["EthernetNetworkInterface"] = "EthernetNetworkInterface";
+  })(Feature = NetworkCommissioning2.Feature || (NetworkCommissioning2.Feature = {}));
+  NetworkCommissioning2.TlvScanNetworksRequest = TlvObject({
+    /**
+     * This field, if present, shall contain the SSID for a directed scan of that particular Wi-Fi SSID. Otherwise,
+     * if the field is absent, or if it is null, this shall indicate scanning of all BSSID in range. This field
+     * shall be ignored for ScanNetworks invocations on non-Wi-Fi server instances.
+     *
+     * @see {@link MatterSpecification.v13.Core} § 11.9.7.1.1
+     */
+    ssid: TlvOptionalField(0, TlvNullable(TlvByteString.bound({ minLength: 1, maxLength: 32 }))),
+    /**
+     * The Breadcrumb field, if present, shall be used to atomically set the Breadcrumb attribute in the General
+     * Commissioning cluster on success of the associated command. If the command fails, the Breadcrumb attribute
+     * in the General Commissioning cluster shall be left unchanged.
+     *
+     * @see {@link MatterSpecification.v13.Core} § 11.9.7.1.2
+     */
+    breadcrumb: TlvOptionalField(1, TlvUInt64)
+  });
+  let NetworkCommissioningStatus;
+  ((NetworkCommissioningStatus2) => {
+    NetworkCommissioningStatus2[NetworkCommissioningStatus2["Success"] = 0] = "Success";
+    NetworkCommissioningStatus2[NetworkCommissioningStatus2["OutOfRange"] = 1] = "OutOfRange";
+    NetworkCommissioningStatus2[NetworkCommissioningStatus2["BoundsExceeded"] = 2] = "BoundsExceeded";
+    NetworkCommissioningStatus2[NetworkCommissioningStatus2["NetworkIdNotFound"] = 3] = "NetworkIdNotFound";
+    NetworkCommissioningStatus2[NetworkCommissioningStatus2["DuplicateNetworkId"] = 4] = "DuplicateNetworkId";
+    NetworkCommissioningStatus2[NetworkCommissioningStatus2["NetworkNotFound"] = 5] = "NetworkNotFound";
+    NetworkCommissioningStatus2[NetworkCommissioningStatus2["RegulatoryError"] = 6] = "RegulatoryError";
+    NetworkCommissioningStatus2[NetworkCommissioningStatus2["AuthFailure"] = 7] = "AuthFailure";
+    NetworkCommissioningStatus2[NetworkCommissioningStatus2["UnsupportedSecurity"] = 8] = "UnsupportedSecurity";
+    NetworkCommissioningStatus2[NetworkCommissioningStatus2["OtherConnectionFailure"] = 9] = "OtherConnectionFailure";
+    NetworkCommissioningStatus2[NetworkCommissioningStatus2["Ipv6Failed"] = 10] = "Ipv6Failed";
+    NetworkCommissioningStatus2[NetworkCommissioningStatus2["IpBindFailed"] = 11] = "IpBindFailed";
+    NetworkCommissioningStatus2[NetworkCommissioningStatus2["UnknownError"] = 12] = "UnknownError";
+  })(NetworkCommissioningStatus = NetworkCommissioning2.NetworkCommissioningStatus || (NetworkCommissioning2.NetworkCommissioningStatus = {}));
+  NetworkCommissioning2.WiFiSecurity = {
+    /**
+     * Supports unencrypted Wi-Fi
+     */
+    unencrypted: BitFlag(0),
+    /**
+     * Supports Wi-Fi using WEP security
+     */
+    wep: BitFlag(1),
+    /**
+     * Supports Wi-Fi using WPA-Personal security
+     */
+    wpaPersonal: BitFlag(2),
+    /**
+     * Supports Wi-Fi using WPA2-Personal security
+     */
+    wpa2Personal: BitFlag(3),
+    /**
+     * Supports Wi-Fi using WPA3-Personal security
+     */
+    wpa3Personal: BitFlag(4)
+  };
+  let WiFiBand;
+  ((WiFiBand2) => {
+    WiFiBand2[WiFiBand2["2G4"] = 0] = "2G4";
+    WiFiBand2[WiFiBand2["3G65"] = 1] = "3G65";
+    WiFiBand2[WiFiBand2["5G"] = 2] = "5G";
+    WiFiBand2[WiFiBand2["6G"] = 3] = "6G";
+    WiFiBand2[WiFiBand2["60G"] = 4] = "60G";
+    WiFiBand2[WiFiBand2["1G"] = 5] = "1G";
+  })(WiFiBand = NetworkCommissioning2.WiFiBand || (NetworkCommissioning2.WiFiBand = {}));
+  NetworkCommissioning2.TlvWiFiInterfaceScanResult = TlvObject({
+    security: TlvOptionalField(0, TlvBitmap(TlvUInt8, NetworkCommissioning2.WiFiSecurity)),
+    ssid: TlvOptionalField(1, TlvByteString.bound({ maxLength: 32 })),
+    bssid: TlvOptionalField(2, TlvByteString.bound({ length: 6 })),
+    channel: TlvOptionalField(3, TlvUInt16),
+    /**
+     * This field, if present, may be used to differentiate overlapping channel number values across different
+     * Wi-Fi frequency bands.
+     *
+     * @see {@link MatterSpecification.v13.Core} § 11.9.5.6.1
+     */
+    wiFiBand: TlvOptionalField(4, TlvEnum()),
+    /**
+     * This field, if present, shall denote the signal strength in dBm of the associated scan result.
+     *
+     * @see {@link MatterSpecification.v13.Core} § 11.9.5.6.2
+     */
+    rssi: TlvOptionalField(5, TlvInt8)
+  });
+  NetworkCommissioning2.TlvThreadInterfaceScanResult = TlvObject({
+    panId: TlvOptionalField(0, TlvUInt16.bound({ max: 65534 })),
+    extendedPanId: TlvOptionalField(1, TlvUInt64),
+    networkName: TlvOptionalField(2, TlvString.bound({ minLength: 1, maxLength: 16 })),
+    channel: TlvOptionalField(3, TlvUInt16),
+    version: TlvOptionalField(4, TlvUInt8),
+    /**
+     * ExtendedAddress stands for an IEEE 802.15.4 Extended Address.
+     *
+     * @see {@link MatterSpecification.v13.Core} § 11.9.5.7.1
+     */
+    extendedAddress: TlvOptionalField(5, TlvByteString),
+    rssi: TlvOptionalField(6, TlvInt8),
+    lqi: TlvOptionalField(7, TlvUInt8)
+  });
+  NetworkCommissioning2.TlvScanNetworksResponse = TlvObject({
+    /**
+     * The NetworkingStatus field shall indicate the status of the last scan operation, taking one of these values:
+     *
+     *   • Success: Scanning succeeded.
+     *
+     *   • NetworkNotFound: No instance of an explicitly-provided network identifier was found during the scan.
+     *     This error cannot occur if no network identifier was provided, such as when scanning for all available
+     *     networks.
+     *
+     *   • OutOfRange: Network identifier was invalid (e.g. empty, too long, etc).
+     *
+     *   • RegulatoryError: Could not scan on any bands due to lack of regulatory configuration.
+     *
+     *   • UnknownError: An internal error occurred during scanning.
+     *
+     * @see {@link MatterSpecification.v13.Core} § 11.9.7.2.1
+     */
+    networkingStatus: TlvField(0, TlvEnum()),
+    /**
+     * This field, if present and non-empty, may contain error information which may be communicated to the user in
+     * case the NetworkingStatus was not Success. Its purpose is to help developers in troubleshooting errors and
+     * may go into logs or crash reports.
+     *
+     * @see {@link MatterSpecification.v13.Core} § 11.9.7.2.2
+     */
+    debugText: TlvOptionalField(1, TlvString.bound({ maxLength: 512 })),
+    /**
+     * If NetworkingStatus was Success, this field shall contain the Wi-Fi network scan results. The list may be
+     * empty if none were found in range on the bands supported by the interface, or if directed scanning had been
+     * used and the desired SSID was not found in range.
+     *
+     * The maximum number of results present in the result list supported may depend on memory and may contain a
+     * subset of possibilities, to avoid memory exhaustion on the cluster server and avoid crossing the maximum
+     * command response size supported (see Section 4.4.4, “Message Size Requirements”).
+     *
+     * The order in which results are reported is implementation-specific. Results SHOULD be reported in decreasing
+     * RSSI order, even if RSSI is not reported in the response, to maximize the likelihood that most likely to be
+     * reachable elements are included within the size limits of the response.
+     *
+     * @see {@link MatterSpecification.v13.Core} § 11.9.7.2.3
+     */
+    wiFiScanResults: TlvOptionalField(2, TlvArray(NetworkCommissioning2.TlvWiFiInterfaceScanResult)),
+    /**
+     * If NetworkingStatus was Success, this field shall contain the Thread network scan results. The list may be
+     * empty if none were found in range on the bands supported by the interface.
+     *
+     * The maximum number of results present in the result list supported may depend on memory and may contain a
+     * subset of possibilities, to avoid memory exhaustion on the cluster server and avoid crossing the maximum
+     * command response size supported (see Section 4.4.4, “Message Size Requirements”).
+     *
+     * The order in which results are reported is implementation-specific. Results SHOULD be reported in decreasing
+     * LQI order, to maximize the likelihood that most likely to be reachable elements are included within the size
+     * limits of the response.
+     *
+     * @see {@link MatterSpecification.v13.Core} § 11.9.7.2.4
+     */
+    threadScanResults: TlvOptionalField(3, TlvArray(NetworkCommissioning2.TlvThreadInterfaceScanResult))
+  });
+  NetworkCommissioning2.TlvRemoveNetworkRequest = TlvObject({
+    /**
+     * This field shall contain the NetworkID for the entry to remove: the SSID for Wi-Fi and XPAN ID for Thread.
+     *
+     * @see {@link MatterSpecification.v13.Core} § 11.9.7.6.1
+     */
+    networkId: TlvField(0, TlvByteString.bound({ minLength: 1, maxLength: 32 })),
+    /**
+     * See Section 11.9.7.1.2, “Breadcrumb Field” for usage.
+     *
+     * @see {@link MatterSpecification.v13.Core} § 11.9.7.6.2
+     */
+    breadcrumb: TlvOptionalField(1, TlvUInt64)
+  });
+  NetworkCommissioning2.TlvNetworkConfigResponse = TlvObject({
+    /**
+     * The NetworkingStatus field shall indicate the status of the last operation attempting to modify the Networks
+     * attribute configuration, taking one of these values:
+     *
+     *   • Success: Operation succeeded.
+     *
+     *   • OutOfRange: Network identifier was invalid (e.g. empty, too long, etc).
+     *
+     *   • BoundsExceeded: Adding this network configuration would exceed the limit defined by Section 11.9.6.1,
+     *     “MaxNetworks Attribute”.
+     *
+     *   • NetworkIdNotFound: The network identifier was expected to be found, but was not found among the added
+     *     network configurations in Networks attribute.
+     *
+     *   • UnknownError: An internal error occurred during the operation.
+     *
+     * @see {@link MatterSpecification.v13.Core} § 11.9.7.7.1
+     */
+    networkingStatus: TlvField(0, TlvEnum()),
+    /**
+     * See Section 11.9.7.2.2, “DebugText Field” for usage.
+     *
+     * @see {@link MatterSpecification.v13.Core} § 11.9.7.7.2
+     */
+    debugText: TlvOptionalField(1, TlvString.bound({ maxLength: 512 })),
+    /**
+     * When the NetworkingStatus is Success, this field shall be present. It shall contain the 0-based index of the
+     * entry in the Networks attribute that was last added, updated or removed successfully by the associated
+     * request command.
+     *
+     * @see {@link MatterSpecification.v13.Core} § 11.9.7.7.3
+     */
+    networkIndex: TlvOptionalField(2, TlvUInt8)
+  });
+  NetworkCommissioning2.TlvConnectNetworkRequest = TlvObject({
+    /**
+     * This field shall contain the NetworkID for the entry used to configure the connection: the SSID for Wi-Fi
+     * and XPAN ID for Thread.
+     *
+     * @see {@link MatterSpecification.v13.Core} § 11.9.7.8.1
+     */
+    networkId: TlvField(0, TlvByteString.bound({ minLength: 1, maxLength: 32 })),
+    /**
+     * See Section 11.9.7.1.2, “Breadcrumb Field” for usage.
+     *
+     * @see {@link MatterSpecification.v13.Core} § 11.9.7.8.2
+     */
+    breadcrumb: TlvOptionalField(1, TlvUInt64)
+  });
+  NetworkCommissioning2.TlvConnectNetworkResponse = TlvObject({
+    /**
+     * The NetworkingStatus field shall indicate the status of the last connection attempt, taking one of these
+     * values:
+     *
+     *   • Success: Connection succeeded.
+     *
+     *   • NetworkNotFound: No instance of an explicitly-provided network identifier was found during the attempt
+     *     to join the network.
+     *
+     *   • OutOfRange: Network identifier was invalid (e.g. empty, too long, etc).
+     *
+     *   • NetworkIdNotFound: The network identifier was not found among the added network configurations in
+     *     Networks attribute.
+     *
+     *   • RegulatoryError: Could not connect to a network due to lack of regulatory configuration.
+     *
+     *   • UnknownError: An internal error occurred during the operation.
+     *
+     *   • Association errors (see also description of errors in Section 11.9.5.4, “NetworkCommissioningStatusEnum
+     *     Type”): AuthFailure, UnsupportedSecurity, OtherConnectionFailure, IPV6Failed, IPBindFailed
+     *
+     * @see {@link MatterSpecification.v13.Core} § 11.9.7.9.1
+     */
+    networkingStatus: TlvField(0, TlvEnum()),
+    /**
+     * See Section 11.9.7.2.2, “DebugText Field” for usage.
+     *
+     * @see {@link MatterSpecification.v13.Core} § 11.9.7.9.2
+     */
+    debugText: TlvOptionalField(1, TlvString),
+    /**
+     *   • ErrorValue interpretation for Wi-Fi association errors:
+     *
+     *     ◦ On any association failure during enabling of a network, the ErrorValue field shall be set to the
+     *       Status Code value that was present in the last frame related to association where Status Code was not
+     *       equal to zero and which caused the failure of a final retry attempt, if this final failure was due to
+     *       one of the following Management frames:
+     *
+     *       ▪ Association Response (Type 0, Subtype 1)
+     *
+     *       ▪ Reassociation Response (Type 0, Subtype 3)
+     *
+     *       ▪ Authentication (Type 0, Subtype 11)
+     *
+     *     ◦ Table 9-50 "Status Codes" in IEEE 802.11-2020 contains a description of all values possible, which can
+     *       unambiguously be used to determine the cause, such as an invalid security type, unsupported rate, etc.
+     *
+     *   • Otherwise, the ErrorValue field shall contain an implementation-dependent value which may be used by a
+     *     reader of the structure to record, report or diagnose the failure.
+     *
+     * @see {@link MatterSpecification.v13.Core} § 11.9.7.9.3
+     */
+    errorValue: TlvField(2, TlvNullable(TlvInt32))
+  });
+  NetworkCommissioning2.TlvReorderNetworkRequest = TlvObject({
+    /**
+     * This field shall contain the NetworkID for the entry to reorder: the SSID for Wi-Fi and XPAN ID for Thread.
+     *
+     * @see {@link MatterSpecification.v13.Core} § 11.9.7.10.1
+     */
+    networkId: TlvField(0, TlvByteString.bound({ minLength: 1, maxLength: 32 })),
+    /**
+     * This field shall contain the 0-based index of the new desired position of the entry in the Networks
+     * attribute.
+     *
+     * @see {@link MatterSpecification.v13.Core} § 11.9.7.10.2
+     */
+    networkIndex: TlvField(1, TlvUInt8),
+    /**
+     * See Section 11.9.7.1.2, “Breadcrumb Field” for usage.
+     *
+     * Effect when received
+     *
+     * If the Networks attribute does not contain a matching entry, the command shall immediately respond with
+     * NetworkConfigResponse having NetworkingStatus status field set to NetworkIdNotFound.
+     *
+     * If the NetworkIndex field has a value larger or equal to the current number of entries in the Networks
+     * attribute, the command shall immediately respond with NetworkConfigResponse having NetworkingStatus status
+     * field set to OutOfRange.
+     *
+     * On success, the NetworkConfigResponse command shall have its NetworkIndex field set to the 0- based index of
+     * the entry in the Networks attribute that was just updated, matching the incoming NetworkIndex, and a
+     * NetworkingStatus status field set to Success.
+     *
+     * The entry selected shall be inserted at the new position in the list. All other entries, if any exist, shall
+     * be moved to allow the insertion, in a way that they all retain their existing relative order between each
+     * other, with the exception of the newly re-ordered entry.
+     *
+     * Re-ordering to the same NetworkIndex as the current location shall be considered as a success and yield no
+     * visible changes of the Networks attribute.
+     *
+     * Examples of re-ordering
+     *
+     * To better illustrate the re-ordering operation, consider this initial state, exemplary of a Wi-Fi device:
+     *
+     * On receiving ReorderNetwork with:
+     *
+     *   • NetworkId = Home-Guest
+     *
+     *   • NetworkIndex = 0
+     *
+     * The outcome, after applying to the initial state would be:
+     *
+     * In the above outcome, FancyCat and BlueDolphin moved "down" and Home-Guest became the highest priority
+     * network in the list.
+     *
+     * On receiving ReorderNetwork with:
+     *
+     *   • NetworkId = FancyCat
+     *
+     *   • NetworkIndex = 3
+     *
+     * The outcome, after applying to the initial state would be:
+     *
+     * In the above outcome, BlueDolphin, Home-Guest and WillowTree moved "up" and FancyCat became the lowest
+     * priority network in the list.
+     *
+     * @see {@link MatterSpecification.v13.Core} § 11.9.7.10.3
+     */
+    breadcrumb: TlvOptionalField(2, TlvUInt64)
+  });
+  NetworkCommissioning2.TlvAddOrUpdateWiFiNetworkRequest = TlvObject({
+    /**
+     * This field shall contain the SSID to which to attempt connection. Specific BSSID selection is not supported
+     * by this cluster.
+     *
+     * @see {@link MatterSpecification.v13.Core} § 11.9.7.3.1
+     */
+    ssid: TlvField(0, TlvByteString.bound({ maxLength: 32 })),
+    /**
+     * Credentials is the passphrase or PSK for the network (if any is needed).
+     *
+     * Security type, cipher and credential format (passphrase or PSK) shall be contextually auto- selected during
+     * execution of the ConnectNetwork Command and during subsequent operational state network connections, based
+     * on the most secure Wi-Fi security type available within beacons and probe responses for the set of all
+     * discovered BSSIDs for the configured SSID. The type of PSK or passphrase used shall be inferred based on the
+     * length and contents of the Credentials field provided, matching the security type chosen.
+     *
+     * Valid Credentials length are:
+     *
+     *   • 0 bytes: Unsecured (open) connection
+     *
+     *   • 5 bytes: WEP-64 passphrase
+     *
+     *   • 10 hexadecimal ASCII characters: WEP-64 40-bit hex raw PSK
+     *
+     *   • 13 bytes: WEP-128 passphrase
+     *
+     *   • 26 hexadecimal ASCII characters: WEP-128 104-bit hex raw PSK
+     *
+     *   • 8..63 bytes: WPA/WPA2/WPA3 passphrase
+     *
+     *   • 64 bytes: WPA/WPA2/WPA3 raw hex PSK
+     *
+     * These lengths shall be contextually interpreted based on the security type of the BSSID where connection
+     * will occur.
+     *
+     * When the length of Credentials and available set of BSSID admits more than one option, such as the presence
+     * of both WPA2 and WPA security type within the result set, WPA2 shall be considered more secure.
+     *
+     * Note that it may occur that a station cannot connect to a particular access point with higher security and
+     * selects a lower security connectivity type if the link quality is deemed to be too low to achieve successful
+     * operation, or if all retry attempts fail.
+     *
+     * @see {@link MatterSpecification.v13.Core} § 11.9.7.3.2
+     */
+    credentials: TlvField(1, TlvByteString.bound({ maxLength: 64 })),
+    /**
+     * See Section 11.9.7.1.2, “Breadcrumb Field” for usage.
+     *
+     * @see {@link MatterSpecification.v13.Core} § 11.9.7.3.3
+     */
+    breadcrumb: TlvOptionalField(2, TlvUInt64)
+  });
+  NetworkCommissioning2.ThreadCapabilities = {
+    /**
+     * Thread Border Router functionality is present
+     */
+    isBorderRouterCapable: BitFlag(0),
+    /**
+     * Router mode is supported (interface could be in router or REED mode)
+     */
+    isRouterCapable: BitFlag(1),
+    /**
+     * Sleepy end-device mode is supported
+     */
+    isSleepyEndDeviceCapable: BitFlag(2),
+    /**
+     * Device is a full Thread device (opposite of Minimal Thread Device)
+     */
+    isFullThreadDevice: BitFlag(3),
+    /**
+     * Synchronized sleepy end-device mode is supported
+     */
+    isSynchronizedSleepyEndDeviceCapable: BitFlag(4)
+  };
+  NetworkCommissioning2.TlvAddOrUpdateThreadNetworkRequest = TlvObject({
+    /**
+     * The OperationalDataset field shall contain the Thread Network Parameters, including channel, PAN ID, and
+     * Extended PAN ID.
+     *
+     * The encoding for the OperationalDataset field is defined in the Thread specification. The client shall pass
+     * the OperationalDataset as an opaque octet string.
+     *
+     * @see {@link MatterSpecification.v13.Core} § 11.9.7.4.1
+     */
+    operationalDataset: TlvField(0, TlvByteString.bound({ maxLength: 254 })),
+    /**
+     * See Section 11.9.7.1.2, “Breadcrumb Field” for usage.
+     *
+     * @see {@link MatterSpecification.v13.Core} § 11.9.7.4.2
+     */
+    breadcrumb: TlvOptionalField(1, TlvUInt64)
+  });
+  NetworkCommissioning2.TlvNetworkInfo = TlvObject({
+    /**
+     * Every network is uniquely identified (for purposes of commissioning) by a NetworkID mapping to the following
+     * technology-specific properties:
+     *
+     *   • SSID for Wi-Fi
+     *
+     *   • Extended PAN ID for Thread
+     *
+     *   • Network interface instance name at operating system (or equivalent unique name) for Ethernet.
+     *
+     * The semantics of the NetworkID field therefore varies between network types accordingly. It contains SSID
+     * for Wi-Fi networks, Extended PAN ID (XPAN ID) for Thread networks and netif name for Ethernet networks.
+     *
+     * NOTE
+     *
+     * SSID in Wi-Fi is a collection of 1-32 bytes, the text encoding of which is not specified. Implementations
+     * must be careful to support reporting byte strings without requiring a particular encoding for transfer. Only
+     * the commissioner should try to potentially decode the bytes. The most common encoding is UTF-8, however this
+     * is just a convention. Some configurations may use Latin-1 or other character sets. A commissioner may decode
+     * using UTF-8, replacing encoding errors with "?" at the application level while retaining the underlying
+     * representation.
+     *
+     * XPAN ID is a big-endian 64-bit unsigned number, represented on the first 8 octets of the octet string.
+     *
+     * @see {@link MatterSpecification.v13.Core} § 11.9.5.5.1
+     */
+    networkId: TlvField(0, TlvByteString.bound({ minLength: 1, maxLength: 32 })),
+    /**
+     * This field shall indicate the connected status of the associated network, where "connected" means currently
+     * linked to the network technology (e.g. Associated for a Wi-Fi network, media connected for an Ethernet
+     * network).
+     *
+     * @see {@link MatterSpecification.v13.Core} § 11.9.5.5.2
+     */
+    connected: TlvField(1, TlvBoolean)
+  });
+  NetworkCommissioning2.WiFiNetworkInterfaceOrThreadNetworkInterfaceComponent = MutableCluster.Component({
+    attributes: {
+      /**
+       * Indicates the maximum duration taken, in seconds, by the network interface on this cluster server
+       * instance to provide scan results.
+       *
+       * See Section 11.9.7.1, “ScanNetworks Command” for usage.
+       *
+       * @see {@link MatterSpecification.v13.Core} § 11.9.6.3
+       */
+      scanMaxTimeSeconds: FixedAttribute(2, TlvUInt8),
+      /**
+       * Indicates the maximum duration taken, in seconds, by the network interface on this cluster server
+       * instance to report a successful or failed network connection indication. This maximum time shall account
+       * for all operations needed until a successful network connection is deemed to have occurred, including,
+       * for example, obtaining IP addresses, or the execution of necessary internal retries.
+       *
+       * @see {@link MatterSpecification.v13.Core} § 11.9.6.4
+       */
+      connectMaxTimeSeconds: FixedAttribute(3, TlvUInt8)
+    },
+    commands: {
+      /**
+       * This command shall scan on the Cluster instance’s associated network interface for either of:
+       *
+       *   • All available networks (non-directed scanning)
+       *
+       *   • Specific networks (directed scanning)
+       *
+       * Scanning for available networks detects all networks of the type corresponding to the cluster server
+       * instance’s associated network interface that are possible to join, such as all visible Wi-Fi access
+       * points for Wi-Fi cluster server instances, all Thread PANs for Thread cluster server instances, within
+       * bounds of the maximum response size.
+       *
+       * Scanning for a specific network (i.e. directed scanning) takes place if a network identifier (e.g. Wi-Fi
+       * SSID) is provided in the command arguments. Directed scanning shall restrict the result set to the
+       * specified network only.
+       *
+       * If this command is received without an armed fail-safe context (see Section 11.10.6.2, “ArmFailSafe
+       * Command”), then this command shall fail with a FAILSAFE_REQUIRED status code sent back to the initiator.
+       *
+       * The client shall NOT expect the server to be done scanning and have responded with ScanNetworksResponse
+       * before ScanMaxTimeSeconds seconds have elapsed. Enough transport time affordances for retries SHOULD be
+       * expected before a client determines the operation to have timed-out.
+       *
+       * This command shall fail with a status code of BUSY if the server determines that it will fail to
+       * reliably send a response due to changes of networking interface configuration at runtime for the
+       * interface over which the command was invoked, or if it is currently unable to proceed with such an
+       * operation.
+       *
+       * For Wi-Fi-supporting servers (WI feature) the server shall always honor directed scans, and attempt to
+       * provide all matching BSSID which are reachable on the bands which would otherwise be attempted if a
+       * ConnectNetwork having the specified SSID were to take place. This command is useful for clients to
+       * determine reachability capabilities as seen by the server’s own radios.
+       *
+       * For Wi-Fi-supporting servers the server shall always scan on all bands supported by the interface
+       *
+       * associated with the cluster instance on which the command was invoked.
+       *
+       * If the command was invoked over the same link whose configuration is managed by a given server cluster
+       * instance, there may be an impact on other communication from the invoking client, as well as other
+       * clients, while the network interface is processing the scan. Clients SHOULD NOT use this command unless
+       * actively in the process of re-configuring network connectivity.
+       *
+       * @see {@link MatterSpecification.v13.Core} § 11.9.7.1
+       */
+      scanNetworks: Command(
+        0,
+        NetworkCommissioning2.TlvScanNetworksRequest,
+        1,
+        NetworkCommissioning2.TlvScanNetworksResponse,
+        { invokeAcl: AccessLevel.Administer }
+      ),
+      /**
+       * This command shall remove the network configuration from the Cluster if there was already a network
+       * configuration with the same NetworkID. The relative order of the entries in the Networks
+       *
+       * attribute shall remain unchanged, except for the removal of the requested network configuration.
+       *
+       * If this command is received without an armed fail-safe context (see Section 11.10.6.2, “ArmFailSafe
+       * Command”), then this command shall fail with a FAILSAFE_REQUIRED status code sent back to the initiator.
+       *
+       * If the Networks attribute does not contain a matching entry, the command shall immediately respond with
+       * NetworkConfigResponse having NetworkingStatus status field set to NetworkIdNotFound.
+       *
+       * On success, the NetworkConfigResponse command shall have its NetworkIndex field set to the 0- based
+       * index of the entry in the Networks attribute that was just removed, and a NetworkingStatus status field
+       * set to Success.
+       *
+       * @see {@link MatterSpecification.v13.Core} § 11.9.7.6
+       */
+      removeNetwork: Command(
+        4,
+        NetworkCommissioning2.TlvRemoveNetworkRequest,
+        5,
+        NetworkCommissioning2.TlvNetworkConfigResponse,
+        { invokeAcl: AccessLevel.Administer }
+      ),
+      /**
+       * This command shall attempt to connect to a network whose configuration was previously added by either
+       * the AddOrUpdateWiFiNetwork or AddOrUpdateThreadNetwork commands. Network is identified by its NetworkID.
+       *
+       * This command shall fail with a BUSY status code returned to the initiator if the server is currently
+       * unable to proceed with such an operation, such as if it is currently attempting to connect in the
+       * background, or is already proceeding with a prior ConnectNetwork.
+       *
+       * If this command is received without an armed fail-safe context (see Section 11.10.6.2, “ArmFailSafe
+       * Command”), then this command shall fail with a FAILSAFE_REQUIRED status code sent back to the initiator.
+       *
+       * Success or failure of this command shall be communicated by the ConnectNetworkResponse command, unless
+       * some data model validations caused a FAILURE status to be sent prior to finishing execution of the
+       * command. The ConnectNetworkResponse shall indicate the value Success in the NetworkingStatus field on
+       * successful connection. On failure to connect, the ConnectNetworkResponse shall contain an appropriate
+       * NetworkingStatus, DebugText and ErrorValue indicating the reason for failure.
+       *
+       * The amount of time needed to determine successful or failing connectivity on the cluster server’s
+       * associated interface is provided by the ConnectMaxTimeSeconds attribute. Clients shall NOT consider the
+       * connection to have timed-out until at least that duration has taken place. For non-concurrent
+       * commissioning situations, the client SHOULD allow additional margin of time to account for its delay in
+       * executing operational discovery of the Node once it is connected to the new network.
+       *
+       * On successful connection, the entry associated with the given Network configuration in the Networks
+       * attribute shall indicate its Connected field set to true, and all other entries, if any exist, shall
+       * indicate their Connected field set to false.
+       *
+       * On failure to connect, the entry associated with the given Network configuration in the Networks
+       * attribute shall indicate its Connected field set to false.
+       *
+       * The precedence order of any entry subject to ConnectNetwork shall NOT change within the Networks
+       * attribute.
+       *
+       * Even after successfully connecting to a network, the configuration shall revert to the prior state of
+       * configuration if the CommissioningComplete command (see Section 11.10.6.6, “CommissioningComplete
+       * Command”) is not successfully invoked before expiry of the Fail-Safe timer.
+       *
+       * When non-concurrent commissioning is being used by a Commissioner or Administrator, the
+       * ConnectNetworkResponse shall be sent with the NetworkingStatus field set to Success prior to closing the
+       * commissioning channel, even if not yet connected to the operational network, unless the device would be
+       * incapable of joining that network, in which case the usual failure path described in the prior
+       * paragraphs shall be followed. Once the commissioning channel is closed, the operational channel will be
+       * started. It is possible that the only method to determine success of the operation is operational
+       * discovery of the Node on the new operational network. Therefore, before invoking the ConnectNetwork
+       * command, the client SHOULD re-invoke the Arm Fail-Safe command with a duration that meets the following:
+       *
+       *   1. Sufficient time to meet the minimum required time (see Section 11.9.6.4, “ConnectMaxTimeSeconds
+       *      Attribute”) that may be taken by the server to connect to the desired network.
+       *
+       *   2. Sufficient time to account for possible message-layer retries when a response is requested.
+       *
+       *   3. Sufficient time to allow operational discovery on the new network by a Commissioner or
+       *      Administrator.
+       *
+       *   4. Sufficient time to establish a CASE session after operational discovery
+       *
+       *   5. Not so long that, in error situations, the delay to reverting back to being discoverable for
+       *      commissioning with a previous configuration would cause significant user-perceived delay.
+       *
+       * Note as well that the CommissioningTimeout duration provided in a prior OpenCommissioningWindow or
+       * OpenBasicCommissioningWindow command may impact the total time available to proceed with error recovery
+       * after a connection failure.
+       *
+       * The LastNetworkingStatus, LastNetworkID and LastConnectErrorValue attributes may assist the client in
+       * determining the reason for a failure after reconnecting over a Commissioning channel, especially in
+       * non-concurrent commissioning situations.
+       *
+       * @see {@link MatterSpecification.v13.Core} § 11.9.7.8
+       */
+      connectNetwork: Command(
+        6,
+        NetworkCommissioning2.TlvConnectNetworkRequest,
+        7,
+        NetworkCommissioning2.TlvConnectNetworkResponse,
+        { invokeAcl: AccessLevel.Administer }
+      ),
+      /**
+       * This command shall set the specific order of the network configuration selected by its NetworkID in the
+       * Networks attribute to match the position given by NetworkIndex.
+       *
+       * @see {@link MatterSpecification.v13.Core} § 11.9.7.10
+       */
+      reorderNetwork: Command(
+        8,
+        NetworkCommissioning2.TlvReorderNetworkRequest,
+        5,
+        NetworkCommissioning2.TlvNetworkConfigResponse,
+        { invokeAcl: AccessLevel.Administer }
+      )
+    }
+  });
+  NetworkCommissioning2.WiFiNetworkInterfaceComponent = MutableCluster.Component({
+    attributes: {
+      /**
+       * Indicates all the frequency bands supported by the Wi-Fi interface configured by the cluster instance.
+       *
+       * @see {@link MatterSpecification.v13.Core} § 11.9.6.9
+       */
+      supportedWiFiBands: FixedAttribute(8, TlvArray(TlvEnum(), { minLength: 1 }))
+    },
+    commands: {
+      /**
+       * This command shall be used to add or modify Wi-Fi network configurations.
+       *
+       * If this command is received without an armed fail-safe context (see Section 11.10.6.2, “ArmFailSafe
+       * Command”), then this command shall fail with a FAILSAFE_REQUIRED status code sent back to the initiator.
+       *
+       * The Credentials associated with the network are not readable after execution of this command, as they do
+       * not appear in the Networks attribute, for security reasons.
+       *
+       * If this command contains a ClientIdentifier, and the Networks list does not contain an entry with a
+       * matching ClientIdentifier, then this command shall fail with a status of NOT_FOUND.
+       *
+       * See Section 11.9.7.5, “Common processing of AddOrUpdateWiFiNetwork and AddOrUpdateThreadNetwork” for
+       * behavior of addition/update.
+       *
+       * @see {@link MatterSpecification.v13.Core} § 11.9.7.3
+       */
+      addOrUpdateWiFiNetwork: Command(
+        2,
+        NetworkCommissioning2.TlvAddOrUpdateWiFiNetworkRequest,
+        5,
+        NetworkCommissioning2.TlvNetworkConfigResponse,
+        { invokeAcl: AccessLevel.Administer }
+      )
+    }
+  });
+  NetworkCommissioning2.ThreadNetworkInterfaceComponent = MutableCluster.Component({
+    attributes: {
+      /**
+       * Indicates all of the Thread features supported by the Thread interface configured by the cluster
+       * instance.
+       *
+       * This attribute is primarily used to determine the most important general capabilities of the Thread
+       * interface associated with the cluster instance, as opposed to the current runtime dynamic configuration.
+       * Note that most run-time details of the actual Thread interface are found in the Thread Network
+       * Diagnostics cluster, if supported.
+       *
+       * @see {@link MatterSpecification.v13.Core} § 11.9.6.10
+       */
+      supportedThreadFeatures: FixedAttribute(9, TlvBitmap(TlvUInt16, NetworkCommissioning2.ThreadCapabilities)),
+      /**
+       * Indicates the Thread version supported by the Thread interface configured by the cluster instance.
+       *
+       * The format shall match the value mapping found in the "Version TLV" section of Thread specification. For
+       * example, Thread 1.3.0 would have ThreadVersion set to 4.
+       *
+       * @see {@link MatterSpecification.v13.Core} § 11.9.6.11
+       */
+      threadVersion: FixedAttribute(10, TlvUInt16)
+    },
+    commands: {
+      /**
+       * This command shall be used to add or modify Thread network configurations.
+       *
+       * If this command is received without an armed fail-safe context (see Section 11.10.6.2, “ArmFailSafe
+       * Command”), then this command shall fail with a FAILSAFE_REQUIRED status code sent back to the initiator.
+       *
+       * See Section 11.9.7.5, “Common processing of AddOrUpdateWiFiNetwork and AddOrUpdateThreadNetwork” for
+       * behavior of addition/update.
+       *
+       * The XPAN ID in the OperationalDataset serves as the NetworkID for the network configuration to be added
+       * or updated.
+       *
+       * If the Networks attribute does not contain an entry with the same NetworkID as the one provided in the
+       * OperationalDataset, the operation shall be considered an addition, otherwise, it shall be considered an
+       * update.
+       *
+       * @see {@link MatterSpecification.v13.Core} § 11.9.7.4
+       */
+      addOrUpdateThreadNetwork: Command(
+        3,
+        NetworkCommissioning2.TlvAddOrUpdateThreadNetworkRequest,
+        5,
+        NetworkCommissioning2.TlvNetworkConfigResponse,
+        { invokeAcl: AccessLevel.Administer }
+      )
+    }
+  });
+  NetworkCommissioning2.Base = MutableCluster.Component({
+    id: 49,
+    name: "NetworkCommissioning",
+    revision: 2,
+    features: {
+      /**
+       * WiFiNetworkInterface
+       *
+       * Wi-Fi related features
+       */
+      wiFiNetworkInterface: BitFlag(0),
+      /**
+       * ThreadNetworkInterface
+       *
+       * Thread related features
+       */
+      threadNetworkInterface: BitFlag(1),
+      /**
+       * EthernetNetworkInterface
+       *
+       * Ethernet related features
+       */
+      ethernetNetworkInterface: BitFlag(2)
+    },
+    attributes: {
+      /**
+       * This shall indicate the maximum number of network configuration entries that can be added, based on
+       * available device resources. The length of the Networks attribute shall be less than or equal to this
+       * value.
+       *
+       * @see {@link MatterSpecification.v13.Core} § 11.9.6.1
+       */
+      maxNetworks: FixedAttribute(
+        0,
+        TlvUInt8.bound({ min: 1 }),
+        { readAcl: AccessLevel.Administer, writeAcl: AccessLevel.Administer }
+      ),
+      /**
+       * Indicates the network configurations that are usable on the network interface represented by this
+       * cluster server instance.
+       *
+       * The order of configurations in the list reflects precedence. That is, any time the Node attempts to
+       * connect to the network it shall attempt to do so using the configurations in Networks Attribute in the
+       * order as they appear in the list.
+       *
+       * The order of list items shall only be modified by the AddOrUpdateThreadNetwork, AddOrUpdateWiFiNetwork
+       * and ReorderNetwork commands. In other words, the list shall be stable over time, unless mutated
+       * externally.
+       *
+       * Ethernet networks shall be automatically populated by the cluster server. Ethernet Network Commissioning
+       * Cluster instances shall always have exactly one NetworkInfoStruct instance in their Networks attribute.
+       * There shall be no way to add, update or remove Ethernet network configurations to those Cluster
+       * instances.
+       *
+       * @see {@link MatterSpecification.v13.Core} § 11.9.6.2
+       */
+      networks: Attribute(
+        1,
+        TlvArray(NetworkCommissioning2.TlvNetworkInfo),
+        { default: [], readAcl: AccessLevel.Administer, writeAcl: AccessLevel.Administer }
+      ),
+      /**
+       * Indicates whether the associated network interface is enabled or not. By default all network interfaces
+       * SHOULD be enabled during initial commissioning (InterfaceEnabled set to true).
+       *
+       * It is undefined what happens if InterfaceEnabled is written to false on the same interface as that which
+       * is used to write the value. In that case, it is possible that the Administrator would have to await
+       * expiry of the fail-safe, and associated recovery of network configuration to prior safe values, before
+       * being able to communicate with the node again (see Section 11.10.6.2, “ArmFailSafe Command”).
+       *
+       * It may be possible to disable Ethernet interfaces but it is implementation-defined. If not supported, a
+       * write to this attribute with a value of false shall fail with a status of INVALID_ACTION. When disabled,
+       * an Ethernet interface would longer employ media detection. That is, a simple unplug and replug of the
+       * cable shall NOT re-enable the interface.
+       *
+       * On Ethernet-only Nodes, there shall always be at least one of the Network Commissioning server cluster
+       * instances with InterfaceEnabled set to true.
+       *
+       * @see {@link MatterSpecification.v13.Core} § 11.9.6.5
+       */
+      interfaceEnabled: WritableAttribute(
+        4,
+        TlvBoolean,
+        { persistent: true, default: true, writeAcl: AccessLevel.Administer }
+      ),
+      /**
+       * Indicates the status of the last attempt either scan or connect to an operational network, using this
+       * interface, whether by invocation of the ConnectNetwork command or by autonomous connection after loss of
+       * connectivity or during initial establishment. If no such attempt was made, or no network configurations
+       * exist in the Networks attribute, then this attribute shall be set to null.
+       *
+       * This attribute is present to assist with error recovery during Network commissioning and to assist in
+       * non-concurrent networking commissioning flows.
+       *
+       * @see {@link MatterSpecification.v13.Core} § 11.9.6.6
+       */
+      lastNetworkingStatus: Attribute(
+        5,
+        TlvNullable(TlvEnum()),
+        { default: null, readAcl: AccessLevel.Administer, writeAcl: AccessLevel.Administer }
+      ),
+      /**
+       * Indicates the NetworkID used in the last attempt to connect to an operational network, using this
+       * interface, whether by invocation of the ConnectNetwork command or by autonomous connection after loss of
+       * connectivity or during initial establishment. If no such attempt was made, or no network configurations
+       * exist in the Networks attribute, then this attribute shall be set to null.
+       *
+       * If a network configuration is removed from the Networks attribute using the RemoveNetwork command after
+       * a connection attempt, this field may indicate a NetworkID that is no longer configured on the Node.
+       *
+       * This attribute is present to assist with error recovery during Network commissioning and to assist in
+       * non-concurrent networking commissioning flows.
+       *
+       * @see {@link MatterSpecification.v13.Core} § 11.9.6.7
+       */
+      lastNetworkId: Attribute(
+        6,
+        TlvNullable(TlvByteString.bound({ minLength: 1, maxLength: 32 })),
+        { default: null, readAcl: AccessLevel.Administer, writeAcl: AccessLevel.Administer }
+      ),
+      /**
+       * Indicates the ErrorValue used in the last failed attempt to connect to an operational network, using
+       * this interface, whether by invocation of the ConnectNetwork command or by
+       *
+       * autonomous connection after loss of connectivity or during initial establishment. If no such attempt was
+       * made, or no network configurations exist in the Networks attribute, then this attribute shall be set to
+       * null.
+       *
+       * If the last connection succeeded, as indicated by a value of Success in the LastNetworkingStatus
+       * attribute, then this field shall be set to null.
+       *
+       * This attribute is present to assist with error recovery during Network commissioning and to assist in
+       * non-concurrent networking commissioning flows.
+       *
+       * @see {@link MatterSpecification.v13.Core} § 11.9.6.8
+       */
+      lastConnectErrorValue: Attribute(
+        7,
+        TlvNullable(TlvInt32),
+        { default: null, readAcl: AccessLevel.Administer, writeAcl: AccessLevel.Administer }
+      )
+    },
+    /**
+     * This metadata controls which NetworkCommissioningCluster elements matter.js activates for specific feature
+     * combinations.
+     */
+    extensions: MutableCluster.Extensions(
+      { flags: { wiFiNetworkInterface: true }, component: NetworkCommissioning2.WiFiNetworkInterfaceOrThreadNetworkInterfaceComponent },
+      {
+        flags: { threadNetworkInterface: true },
+        component: NetworkCommissioning2.WiFiNetworkInterfaceOrThreadNetworkInterfaceComponent
+      },
+      { flags: { wiFiNetworkInterface: true }, component: NetworkCommissioning2.WiFiNetworkInterfaceComponent },
+      { flags: { threadNetworkInterface: true }, component: NetworkCommissioning2.ThreadNetworkInterfaceComponent },
+      { flags: { wiFiNetworkInterface: true, threadNetworkInterface: true }, component: false },
+      { flags: { wiFiNetworkInterface: true, ethernetNetworkInterface: true }, component: false },
+      { flags: { threadNetworkInterface: true, ethernetNetworkInterface: true }, component: false },
+      {
+        flags: { wiFiNetworkInterface: false, threadNetworkInterface: false, ethernetNetworkInterface: false },
+        component: false
+      }
+    )
+  });
+  NetworkCommissioning2.ClusterInstance = MutableCluster.ExtensibleOnly(NetworkCommissioning2.Base);
+  NetworkCommissioning2.Cluster = NetworkCommissioning2.ClusterInstance;
+  const WI = { wiFiNetworkInterface: true };
+  const TH = { threadNetworkInterface: true };
+  NetworkCommissioning2.CompleteInstance = MutableCluster({
+    id: NetworkCommissioning2.Base.id,
+    name: NetworkCommissioning2.Base.name,
+    revision: NetworkCommissioning2.Base.revision,
+    features: NetworkCommissioning2.Base.features,
+    attributes: {
+      ...NetworkCommissioning2.Base.attributes,
+      scanMaxTimeSeconds: MutableCluster.AsConditional(
+        NetworkCommissioning2.WiFiNetworkInterfaceOrThreadNetworkInterfaceComponent.attributes.scanMaxTimeSeconds,
+        { mandatoryIf: [WI, TH] }
+      ),
+      connectMaxTimeSeconds: MutableCluster.AsConditional(
+        NetworkCommissioning2.WiFiNetworkInterfaceOrThreadNetworkInterfaceComponent.attributes.connectMaxTimeSeconds,
+        { mandatoryIf: [WI, TH] }
+      ),
+      supportedWiFiBands: MutableCluster.AsConditional(
+        NetworkCommissioning2.WiFiNetworkInterfaceComponent.attributes.supportedWiFiBands,
+        { mandatoryIf: [WI] }
+      ),
+      supportedThreadFeatures: MutableCluster.AsConditional(
+        NetworkCommissioning2.ThreadNetworkInterfaceComponent.attributes.supportedThreadFeatures,
+        { mandatoryIf: [TH] }
+      ),
+      threadVersion: MutableCluster.AsConditional(
+        NetworkCommissioning2.ThreadNetworkInterfaceComponent.attributes.threadVersion,
+        { mandatoryIf: [TH] }
+      )
+    },
+    commands: {
+      scanNetworks: MutableCluster.AsConditional(
+        NetworkCommissioning2.WiFiNetworkInterfaceOrThreadNetworkInterfaceComponent.commands.scanNetworks,
+        { mandatoryIf: [WI, TH] }
+      ),
+      addOrUpdateWiFiNetwork: MutableCluster.AsConditional(
+        NetworkCommissioning2.WiFiNetworkInterfaceComponent.commands.addOrUpdateWiFiNetwork,
+        { mandatoryIf: [WI] }
+      ),
+      addOrUpdateThreadNetwork: MutableCluster.AsConditional(
+        NetworkCommissioning2.ThreadNetworkInterfaceComponent.commands.addOrUpdateThreadNetwork,
+        { mandatoryIf: [TH] }
+      ),
+      removeNetwork: MutableCluster.AsConditional(
+        NetworkCommissioning2.WiFiNetworkInterfaceOrThreadNetworkInterfaceComponent.commands.removeNetwork,
+        { mandatoryIf: [WI, TH] }
+      ),
+      connectNetwork: MutableCluster.AsConditional(
+        NetworkCommissioning2.WiFiNetworkInterfaceOrThreadNetworkInterfaceComponent.commands.connectNetwork,
+        { mandatoryIf: [WI, TH] }
+      ),
+      reorderNetwork: MutableCluster.AsConditional(
+        NetworkCommissioning2.WiFiNetworkInterfaceOrThreadNetworkInterfaceComponent.commands.reorderNetwork,
+        { mandatoryIf: [WI, TH] }
+      )
+    }
+  });
+  NetworkCommissioning2.Complete = NetworkCommissioning2.CompleteInstance;
+})(NetworkCommissioning || (NetworkCommissioning = {}));
+const NetworkCommissioningCluster = NetworkCommissioning.Cluster;
+ClusterRegistry.register(NetworkCommissioning.Complete);
+export {
+  NetworkCommissioning,
+  NetworkCommissioningCluster
+};
+//# sourceMappingURL=network-commissioning.js.map