@matter/types 0.11.0-alpha.0-20241005-e3e4e4a7a

package/dist/cjs/clusters/pump-configuration-and-control.d.ts

@@ -0,0 +1,2203 @@
+/**
+ * @license
+ * Copyright 2022-2024 Matter.js Authors
+ * SPDX-License-Identifier: Apache-2.0
+ */
+/*** THIS FILE IS GENERATED, DO NOT EDIT ***/
+import { MutableCluster } from "../cluster/mutation/MutableCluster.js";
+import { FixedAttribute, OptionalFixedAttribute, OptionalAttribute, Attribute, OptionalWritableAttribute, WritableAttribute, OptionalEvent } from "../cluster/Cluster.js";
+import { BitFlag } from "../schema/BitmapSchema.js";
+import { Identity } from "#general";
+export declare namespace PumpConfigurationAndControl {
+    /**
+     * These are optional features supported by PumpConfigurationAndControlCluster.
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.2.4
+     */
+    enum Feature {
+        /**
+         * ConstantPressure (PRSCONST)
+         *
+         * Supports operating in constant pressure mode
+         */
+        ConstantPressure = "ConstantPressure",
+        /**
+         * CompensatedPressure (PRSCOMP)
+         *
+         * Supports operating in compensated pressure mode
+         */
+        CompensatedPressure = "CompensatedPressure",
+        /**
+         * ConstantFlow (FLW)
+         *
+         * Supports operating in constant flow mode
+         */
+        ConstantFlow = "ConstantFlow",
+        /**
+         * ConstantSpeed (SPD)
+         *
+         * Supports operating in constant speed mode
+         */
+        ConstantSpeed = "ConstantSpeed",
+        /**
+         * ConstantTemperature (TEMP)
+         *
+         * Supports operating in constant temperature mode
+         */
+        ConstantTemperature = "ConstantTemperature",
+        /**
+         * Automatic (AUTO)
+         *
+         * Supports operating in automatic mode
+         */
+        Automatic = "Automatic",
+        /**
+         * LocalOperation (LOCAL)
+         *
+         * Supports operating using local settings
+         */
+        LocalOperation = "LocalOperation"
+    }
+    /**
+     * @see {@link MatterSpecification.v13.Cluster} § 4.2.6.1
+     */
+    const PumpStatus: {
+        /**
+         * A fault related to the system or pump device is detected.
+         *
+         * If this bit is set, it may correspond to an event in the range 2-16, see Events.
+         *
+         * @see {@link MatterSpecification.v13.Cluster} § 4.2.6.1.1
+         */
+        deviceFault: BitFlag;
+        /**
+         * A fault related to the supply to the pump is detected.
+         *
+         * If this bit is set, it may correspond to an event in the range 0-1 or 13, see Events.
+         *
+         * @see {@link MatterSpecification.v13.Cluster} § 4.2.6.1.2
+         */
+        supplyFault: BitFlag;
+        /**
+         * Setpoint is too low to achieve.
+         */
+        speedLow: BitFlag;
+        /**
+         * Setpoint is too high to achieve.
+         */
+        speedHigh: BitFlag;
+        /**
+         * Device control is overridden by hardware, such as an external STOP button or via a local HMI.
+         *
+         * While this bit is set, the EffectiveOperationMode is adjusted to Local. Any request changing OperationMode
+         * shall generate a FAILURE error status until LocalOverride is cleared on the physical device. When
+         * LocalOverride is cleared, the device shall return to the operation mode set in OperationMode.
+         *
+         * @see {@link MatterSpecification.v13.Cluster} § 4.2.6.1.3
+         */
+        localOverride: BitFlag;
+        /**
+         * Pump is currently running
+         */
+        running: BitFlag;
+        /**
+         * A remote pressure sensor is used as the sensor for the regulation of the pump.
+         *
+         * If this bit is set, EffectiveControlMode is ConstantPressure and the setpoint for the pump is interpreted as
+         * a percentage of the range of the remote sensor ([MinMeasuredValue – MaxMeasuredValue]).
+         *
+         * @see {@link MatterSpecification.v13.Cluster} § 4.2.6.1.4
+         */
+        remotePressure: BitFlag;
+        /**
+         * A remote flow sensor is used as the sensor for the regulation of the pump.
+         *
+         * If this bit is set, EffectiveControlMode is ConstantFlow, and the setpoint for the pump is interpreted as a
+         * percentage of the range of the remote sensor ([MinMeasuredValue – MaxMeasuredValue]).
+         *
+         * @see {@link MatterSpecification.v13.Cluster} § 4.2.6.1.5
+         */
+        remoteFlow: BitFlag;
+        /**
+         * A remote temperature sensor is used as the sensor for the regulation of the pump.
+         *
+         * If this bit is set, EffectiveControlMode is ConstantTemperature, and the setpoint for the pump is
+         * interpreted as a percentage of the range of the remote sensor ([MinMeasuredValue – MaxMeasuredValue])
+         *
+         * @see {@link MatterSpecification.v13.Cluster} § 4.2.6.1.6
+         */
+        remoteTemperature: BitFlag;
+    };
+    /**
+     * @see {@link MatterSpecification.v13.Cluster} § 4.2.6.2
+     */
+    enum OperationMode {
+        /**
+         * The pump is controlled by a setpoint, as defined by a connected remote sensor or by the ControlMode
+         * attribute.
+         *
+         * If the pump is running in this operation mode the setpoint is an internal variable which may be controlled
+         * between 0% and 100%, e.g., by means of the Level Control cluster
+         *
+         * @see {@link MatterSpecification.v13.Cluster} § 4.2.6.2.1
+         */
+        Normal = 0,
+        /**
+         * This value sets the pump to run at the minimum possible speed it can without being stopped.
+         */
+        Minimum = 1,
+        /**
+         * This value sets the pump to run at its maximum possible speed.
+         */
+        Maximum = 2,
+        /**
+         * This value sets the pump to run with the local settings of the pump, regardless of what these are.
+         */
+        Local = 3
+    }
+    /**
+     * @see {@link MatterSpecification.v13.Cluster} § 4.2.6.3
+     */
+    enum ControlMode {
+        /**
+         * The pump is running at a constant speed.
+         *
+         * The setpoint is interpreted as a percentage of the range derived from the [MinConstSpeed – MaxConstSpeed]
+         * attributes.
+         *
+         * @see {@link MatterSpecification.v13.Cluster} § 4.2.6.3.1
+         */
+        ConstantSpeed = 0,
+        /**
+         * The pump will regulate its speed to maintain a constant differential pressure over its flanges.
+         *
+         * The setpoint is interpreted as a percentage of the range of the sensor used for this control mode. In case
+         * of the internal pressure sensor, this will be the range derived from the [MinConstPressure –
+         * MaxConstPressure] attributes. In case of a remote pressure sensor, this will be the range derived from the
+         * [MinMeasuredValue – MaxMeasuredValue] attributes of the remote pressure sensor.
+         *
+         * @see {@link MatterSpecification.v13.Cluster} § 4.2.6.3.2
+         */
+        ConstantPressure = 1,
+        /**
+         * The pump will regulate its speed to maintain a constant differential pressure over its flanges.
+         *
+         * The setpoint is interpreted as a percentage of the range derived of the [MinCompPressure – MaxCompPressure]
+         * attributes. The internal setpoint will be lowered (compensated) dependent on the flow in the pump (lower
+         * flow ⇒ lower internal setpoint).
+         *
+         * @see {@link MatterSpecification.v13.Cluster} § 4.2.6.3.3
+         */
+        ProportionalPressure = 2,
+        /**
+         * The pump will regulate its speed to maintain a constant flow through the pump.
+         *
+         * The setpoint is interpreted as a percentage of the range of the sensor used for this control mode. In case
+         * of the internal flow sensor, this will be the range derived from the [MinConstFlow – MaxConstFlow]
+         * attributes. In case of a remote flow sensor, this will be the range derived from the [MinMeasuredValue –
+         * MaxMeasuredValue] attributes of the remote flow sensor.
+         *
+         * @see {@link MatterSpecification.v13.Cluster} § 4.2.6.3.4
+         */
+        ConstantFlow = 3,
+        /**
+         * The pump will regulate its speed to maintain a constant temperature.
+         *
+         * The setpoint is interpreted as a percentage of the range of the sensor used for this control mode. In case
+         * of the internal temperature sensor, this will be the range derived from the [MinConstTemp – MaxConstTemp]
+         * attributes. In case of a remote temperature sensor, this will be the range derived from the
+         * [MinMeasuredValue – MaxMeasuredValue] attributes of the remote temperature sensor.
+         *
+         * @see {@link MatterSpecification.v13.Cluster} § 4.2.6.3.5
+         */
+        ConstantTemperature = 5,
+        /**
+         * The operation of the pump is automatically optimized to provide the most suitable performance with respect
+         * to comfort and energy savings.
+         *
+         * This behavior is manufacturer defined. The pump can be stopped by setting the setpoint of the level control
+         * cluster to 0, or by using the On/Off cluster. If the pump is started (at any setpoint), the speed of the
+         * pump is entirely determined by the pump.
+         *
+         * @see {@link MatterSpecification.v13.Cluster} § 4.2.6.3.6
+         */
+        Automatic = 7
+    }
+    /**
+     * A PumpConfigurationAndControlCluster supports these elements if it supports feature ConstantPressure.
+     */
+    const ConstantPressureComponent: {
+        readonly attributes: {
+            /**
+             * This attribute specifies the minimum pressure the pump can achieve when it is working with the
+             * ControlMode attribute set to ConstantPressure.
+             *
+             * Valid range is –3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.4
+             */
+            readonly minConstPressure: FixedAttribute<number | null, any>;
+            /**
+             * This attribute specifies the maximum pressure the pump can achieve when it is working with the
+             * ControlMode attribute set to ConstantPressure.
+             *
+             * Valid range is –3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.5
+             */
+            readonly maxConstPressure: FixedAttribute<number | null, any>;
+        };
+    };
+    /**
+     * A PumpConfigurationAndControlCluster supports these elements if it supports feature Automatic.
+     */
+    const AutomaticComponent: {
+        readonly attributes: {
+            /**
+             * This attribute specifies the minimum pressure the pump can achieve when it is working with the
+             * ControlMode attribute set to ConstantPressure.
+             *
+             * Valid range is –3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.4
+             */
+            readonly minConstPressure: OptionalFixedAttribute<number | null, any>;
+            /**
+             * This attribute specifies the maximum pressure the pump can achieve when it is working with the
+             * ControlMode attribute set to ConstantPressure.
+             *
+             * Valid range is –3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.5
+             */
+            readonly maxConstPressure: OptionalFixedAttribute<number | null, any>;
+            /**
+             * This attribute specifies the minimum compensated pressure the pump can achieve when it is working with
+             * the ControlMode attribute set to ProportionalPressure.
+             *
+             * Valid range is –3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.6
+             */
+            readonly minCompPressure: OptionalFixedAttribute<number | null, any>;
+            /**
+             * This attribute specifies the maximum compensated pressure the pump can achieve when it is working with
+             * the ControlMode attribute set to ProportionalPressure.
+             *
+             * Valid range is –3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.7
+             */
+            readonly maxCompPressure: OptionalFixedAttribute<number | null, any>;
+            /**
+             * This attribute specifies the minimum speed the pump can achieve when it is working with the ControlMode
+             * attribute set to ConstantSpeed.
+             *
+             * Valid range is 0 to 65,534 RPM (steps of 1 RPM). Null if the value is invalid.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.8
+             */
+            readonly minConstSpeed: OptionalFixedAttribute<number | null, any>;
+            /**
+             * This attribute specifies the maximum speed the pump can achieve when it is working with the ControlMode
+             * attribute set to ConstantSpeed.
+             *
+             * Valid range is 0 to 65,534 RPM (steps of 1 RPM). Null if the value is invalid.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.9
+             */
+            readonly maxConstSpeed: OptionalFixedAttribute<number | null, any>;
+            /**
+             * This attribute specifies the minimum flow the pump can achieve when it is working with the Con
+             *
+             * trolMode attribute set to ConstantFlow.
+             *
+             * Valid range is 0 m/h to 6,553.4 m/h (steps of 0.1 m/h). Null if the value is invalid.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.10
+             */
+            readonly minConstFlow: OptionalFixedAttribute<number | null, any>;
+            /**
+             * This attribute specifies the maximum flow the pump can achieve when it is working with the ControlMode
+             * attribute set to ConstantFlow.
+             *
+             * Valid range is 0 m/h to 6,553.4 m/h (steps of 0.1 m/h). Null if the value is invalid.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.11
+             */
+            readonly maxConstFlow: OptionalFixedAttribute<number | null, any>;
+            /**
+             * This attribute specifies the minimum temperature the pump can maintain in the system when it is working
+             * with the ControlMode attribute set to ConstantTemperature.
+             *
+             * Valid range is –273.15 °C to 327.67 °C (steps of 0.01 °C). Null if the value is invalid.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.12
+             */
+            readonly minConstTemp: OptionalFixedAttribute<number | null, any>;
+            /**
+             * This attribute specifies the maximum temperature the pump can maintain in the system when it is working
+             * with the ControlMode attribute set to ConstantTemperature.
+             *
+             * MaxConstTemp shall be greater than or equal to MinConstTemp
+             *
+             * Valid range is –273.15 °C to 327.67 °C (steps of 0.01 °C). Null if the value is invalid.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.13
+             */
+            readonly maxConstTemp: OptionalFixedAttribute<number | null, any>;
+        };
+    };
+    /**
+     * A PumpConfigurationAndControlCluster supports these elements if it supports feature CompensatedPressure.
+     */
+    const CompensatedPressureComponent: {
+        readonly attributes: {
+            /**
+             * This attribute specifies the minimum compensated pressure the pump can achieve when it is working with
+             * the ControlMode attribute set to ProportionalPressure.
+             *
+             * Valid range is –3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.6
+             */
+            readonly minCompPressure: FixedAttribute<number | null, any>;
+            /**
+             * This attribute specifies the maximum compensated pressure the pump can achieve when it is working with
+             * the ControlMode attribute set to ProportionalPressure.
+             *
+             * Valid range is –3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.7
+             */
+            readonly maxCompPressure: FixedAttribute<number | null, any>;
+        };
+    };
+    /**
+     * A PumpConfigurationAndControlCluster supports these elements if it supports feature ConstantSpeed.
+     */
+    const ConstantSpeedComponent: {
+        readonly attributes: {
+            /**
+             * This attribute specifies the minimum speed the pump can achieve when it is working with the ControlMode
+             * attribute set to ConstantSpeed.
+             *
+             * Valid range is 0 to 65,534 RPM (steps of 1 RPM). Null if the value is invalid.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.8
+             */
+            readonly minConstSpeed: FixedAttribute<number | null, any>;
+            /**
+             * This attribute specifies the maximum speed the pump can achieve when it is working with the ControlMode
+             * attribute set to ConstantSpeed.
+             *
+             * Valid range is 0 to 65,534 RPM (steps of 1 RPM). Null if the value is invalid.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.9
+             */
+            readonly maxConstSpeed: FixedAttribute<number | null, any>;
+        };
+    };
+    /**
+     * A PumpConfigurationAndControlCluster supports these elements if it supports feature ConstantFlow.
+     */
+    const ConstantFlowComponent: {
+        readonly attributes: {
+            /**
+             * This attribute specifies the minimum flow the pump can achieve when it is working with the Con
+             *
+             * trolMode attribute set to ConstantFlow.
+             *
+             * Valid range is 0 m/h to 6,553.4 m/h (steps of 0.1 m/h). Null if the value is invalid.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.10
+             */
+            readonly minConstFlow: FixedAttribute<number | null, any>;
+            /**
+             * This attribute specifies the maximum flow the pump can achieve when it is working with the ControlMode
+             * attribute set to ConstantFlow.
+             *
+             * Valid range is 0 m/h to 6,553.4 m/h (steps of 0.1 m/h). Null if the value is invalid.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.11
+             */
+            readonly maxConstFlow: FixedAttribute<number | null, any>;
+        };
+    };
+    /**
+     * A PumpConfigurationAndControlCluster supports these elements if it supports feature ConstantTemperature.
+     */
+    const ConstantTemperatureComponent: {
+        readonly attributes: {
+            /**
+             * This attribute specifies the minimum temperature the pump can maintain in the system when it is working
+             * with the ControlMode attribute set to ConstantTemperature.
+             *
+             * Valid range is –273.15 °C to 327.67 °C (steps of 0.01 °C). Null if the value is invalid.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.12
+             */
+            readonly minConstTemp: FixedAttribute<number | null, any>;
+            /**
+             * This attribute specifies the maximum temperature the pump can maintain in the system when it is working
+             * with the ControlMode attribute set to ConstantTemperature.
+             *
+             * MaxConstTemp shall be greater than or equal to MinConstTemp
+             *
+             * Valid range is –273.15 °C to 327.67 °C (steps of 0.01 °C). Null if the value is invalid.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.13
+             */
+            readonly maxConstTemp: FixedAttribute<number | null, any>;
+        };
+    };
+    /**
+     * These elements and properties are present in all PumpConfigurationAndControl clusters.
+     */
+    const Base: {
+        readonly id: 512;
+        readonly name: "PumpConfigurationAndControl";
+        readonly revision: 4;
+        readonly features: {
+            /**
+             * ConstantPressure
+             *
+             * Supports operating in constant pressure mode
+             */
+            readonly constantPressure: BitFlag;
+            /**
+             * CompensatedPressure
+             *
+             * Supports operating in compensated pressure mode
+             */
+            readonly compensatedPressure: BitFlag;
+            /**
+             * ConstantFlow
+             *
+             * Supports operating in constant flow mode
+             */
+            readonly constantFlow: BitFlag;
+            /**
+             * ConstantSpeed
+             *
+             * Supports operating in constant speed mode
+             */
+            readonly constantSpeed: BitFlag;
+            /**
+             * ConstantTemperature
+             *
+             * Supports operating in constant temperature mode
+             */
+            readonly constantTemperature: BitFlag;
+            /**
+             * Automatic
+             *
+             * Supports operating in automatic mode
+             */
+            readonly automatic: BitFlag;
+            /**
+             * LocalOperation
+             *
+             * Supports operating using local settings
+             */
+            readonly localOperation: BitFlag;
+        };
+        readonly attributes: {
+            /**
+             * This attribute specifies the maximum pressure the pump can achieve. It is a physical limit, and does not
+             * apply to any specific control mode or operation mode.
+             *
+             * Valid range is -3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.1
+             */
+            readonly maxPressure: FixedAttribute<number | null, any>;
+            /**
+             * This attribute specifies the maximum speed the pump can achieve. It is a physical limit, and does not
+             * apply to any specific control mode or operation mode.
+             *
+             * Valid range is 0 to 65,534 RPM (steps of 1 RPM). Null if the value is invalid.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.2
+             */
+            readonly maxSpeed: FixedAttribute<number | null, any>;
+            /**
+             * This attribute specifies the maximum flow the pump can achieve. It is a physical limit, and does not
+             * apply to any specific control mode or operation mode.
+             *
+             * Valid range is 0 m/h to 6,553.4 m/h (steps of 0.1 m/h). Null if the value is invalid.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.3
+             */
+            readonly maxFlow: FixedAttribute<number | null, any>;
+            /**
+             * This attribute specifies the activity status of the pump functions as listed in PumpStatusBitmap. Where
+             * a pump controller function is active, the corresponding bit shall be set to 1. Where a pump controller
+             * function is not active, the corresponding bit shall be set to 0.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.14
+             */
+            readonly pumpStatus: OptionalAttribute<import("../schema/BitmapSchema.js").TypeFromPartialBitSchema<{
+                /**
+                 * A fault related to the system or pump device is detected.
+                 *
+                 * If this bit is set, it may correspond to an event in the range 2-16, see Events.
+                 *
+                 * @see {@link MatterSpecification.v13.Cluster} § 4.2.6.1.1
+                 */
+                deviceFault: BitFlag;
+                /**
+                 * A fault related to the supply to the pump is detected.
+                 *
+                 * If this bit is set, it may correspond to an event in the range 0-1 or 13, see Events.
+                 *
+                 * @see {@link MatterSpecification.v13.Cluster} § 4.2.6.1.2
+                 */
+                supplyFault: BitFlag;
+                /**
+                 * Setpoint is too low to achieve.
+                 */
+                speedLow: BitFlag;
+                /**
+                 * Setpoint is too high to achieve.
+                 */
+                speedHigh: BitFlag;
+                /**
+                 * Device control is overridden by hardware, such as an external STOP button or via a local HMI.
+                 *
+                 * While this bit is set, the EffectiveOperationMode is adjusted to Local. Any request changing OperationMode
+                 * shall generate a FAILURE error status until LocalOverride is cleared on the physical device. When
+                 * LocalOverride is cleared, the device shall return to the operation mode set in OperationMode.
+                 *
+                 * @see {@link MatterSpecification.v13.Cluster} § 4.2.6.1.3
+                 */
+                localOverride: BitFlag;
+                /**
+                 * Pump is currently running
+                 */
+                running: BitFlag;
+                /**
+                 * A remote pressure sensor is used as the sensor for the regulation of the pump.
+                 *
+                 * If this bit is set, EffectiveControlMode is ConstantPressure and the setpoint for the pump is interpreted as
+                 * a percentage of the range of the remote sensor ([MinMeasuredValue – MaxMeasuredValue]).
+                 *
+                 * @see {@link MatterSpecification.v13.Cluster} § 4.2.6.1.4
+                 */
+                remotePressure: BitFlag;
+                /**
+                 * A remote flow sensor is used as the sensor for the regulation of the pump.
+                 *
+                 * If this bit is set, EffectiveControlMode is ConstantFlow, and the setpoint for the pump is interpreted as a
+                 * percentage of the range of the remote sensor ([MinMeasuredValue – MaxMeasuredValue]).
+                 *
+                 * @see {@link MatterSpecification.v13.Cluster} § 4.2.6.1.5
+                 */
+                remoteFlow: BitFlag;
+                /**
+                 * A remote temperature sensor is used as the sensor for the regulation of the pump.
+                 *
+                 * If this bit is set, EffectiveControlMode is ConstantTemperature, and the setpoint for the pump is
+                 * interpreted as a percentage of the range of the remote sensor ([MinMeasuredValue – MaxMeasuredValue])
+                 *
+                 * @see {@link MatterSpecification.v13.Cluster} § 4.2.6.1.6
+                 */
+                remoteTemperature: BitFlag;
+            }>, any>;
+            /**
+             * This attribute specifies current effective operation mode of the pump as defined in OperationModeEnum.
+             *
+             * The value of the EffectiveOperationMode attribute is the same as the OperationMode attribute, unless one
+             * of the following points are true:
+             *
+             *   • The pump is physically set to run with the local settings
+             *
+             *   • The LocalOverride bit in the PumpStatus attribute is set,
+             *
+             * See OperationMode and ControlMode attributes for a detailed description of the operation and control of
+             * the pump.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.15
+             */
+            readonly effectiveOperationMode: Attribute<OperationMode, any>;
+            /**
+             * This attribute specifies the current effective control mode of the pump as defined in ControlModeEnum.
+             *
+             * This attribute contains the control mode that currently applies to the pump. It will have the value of
+             * the ControlMode attribute, unless one of the following points are true:
+             *
+             *   • The ControlMode attribute is set to Automatic. In this case, the value of the EffectiveControlMode
+             *     shall match the behavior of the pump.
+             *
+             *   • A remote sensor is used as the sensor for regulation of the pump. In this case, EffectiveControlMode
+             *     will display ConstantPressure, ConstantFlow or ConstantTemperature if the remote sensor is a
+             *     pressure sensor, a flow sensor or a temperature sensor respectively, regardless of the value of the
+             *     ControlMode attribute.
+             *
+             * In case the ControlMode attribute is not included on the device and no remote sensors are connected, the
+             * value of the EffectiveControlMode shall match the vendor-specific behavior of the pump.
+             *
+             * See OperationMode and ControlMode attributes for detailed a description of the operation and control of
+             * the pump.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.16
+             */
+            readonly effectiveControlMode: Attribute<ControlMode, any>;
+            /**
+             * This attribute specifies the actual capacity of the pump as a percentage of the effective maximum
+             * setpoint value. It is updated dynamically as the speed of the pump changes.
+             *
+             * If the value is not available (the measurement or estimation of the speed is done in the pump), this
+             * attribute will indicate the null value.
+             *
+             * Valid range is 0 % to 163.835% (0.005 % granularity). Although this attribute is a signed value, values
+             * of capacity less than zero have no physical meaning.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.17
+             */
+            readonly capacity: Attribute<number | null, any>;
+            /**
+             * This attribute specifies the actual speed of the pump measured in RPM. It is updated dynamically as the
+             * speed of the pump changes.
+             *
+             * If the value is not available (the measurement or estimation of the speed is done in the pump), this
+             * attribute will indicate the null value.
+             *
+             * Valid range is 0 to 65.534 RPM.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.18
+             */
+            readonly speed: OptionalAttribute<number | null, any>;
+            /**
+             * This attribute specifies the accumulated number of hours that the pump has been powered and the motor
+             * has been running. It is updated dynamically as it increases. It is preserved over power cycles of the
+             * pump. If LifeTimeRunningHours rises above maximum value it “rolls over” and starts at 0 (zero).
+             *
+             * This attribute is writeable, in order to allow setting to an appropriate value after maintenance. If
+             *
+             * the value is not available, this attribute will indicate the null value. Valid range is 0 to 16,777,214
+             * hrs.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.19
+             */
+            readonly lifetimeRunningHours: OptionalWritableAttribute<number | null, any>;
+            /**
+             * This attribute specifies the actual power consumption of the pump in Watts. The value of this attribute
+             * is updated dynamically as the power consumption of the pump changes.
+             *
+             * This attribute is read only. If the value is not available (the measurement of power consumption is not
+             * done in the pump), this attribute will indicate the null value.
+             *
+             * Valid range is 0 to 16,777,214 Watts.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.20
+             */
+            readonly power: OptionalAttribute<number | null, any>;
+            /**
+             * This attribute specifies the accumulated energy consumption of the pump through the entire lifetime of
+             * the pump in kWh. The value of the LifetimeEnergyConsumed attribute is updated dynamically as the energy
+             * consumption of the pump increases. If LifetimeEnergyConsumed rises above maximum value it “rolls over”
+             * and starts at 0 (zero).
+             *
+             * This attribute is writeable, in order to allow setting to an appropriate value after maintenance.
+             *
+             * Valid range is 0 kWh to 4,294,967,294 kWh.
+             *
+             * Null if the value is unknown.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.21
+             */
+            readonly lifetimeEnergyConsumed: OptionalWritableAttribute<number | null, any>;
+            /**
+             * This attribute specifies the operation mode of the pump as defined in OperationModeEnum.
+             *
+             * The actual operating mode of the pump is a result of the setting of the attributes OperationMode,
+             * ControlMode and the optional connection of a remote sensor. The operation and control is prioritized as
+             * shown in the scheme below:
+             *
+             * Priority Scheme of Pump Operation and Control
+             *
+             * If this attribute is Maximum, Minimum or Local, the OperationMode attribute decides how the pump is
+             * operated.
+             *
+             * If this attribute is Normal and a remote sensor is connected to the pump, the type of the remote sensor
+             * decides the control mode of the pump. A connected remote pressure sensor will make the pump run in
+             * control mode Constant pressure and vice versa for flow and temperature type sensors. This is regardless
+             * of the setting of the ControlMode attribute.
+             *
+             * If this attribute is Normal and no remote sensor is connected, the control mode of the pump is decided
+             * by the ControlMode attribute.
+             *
+             * OperationMode may be changed at any time, even when the pump is running. The behavior of the pump at the
+             * point of changing the value of this attribute is vendor-specific.
+             *
+             * In the case a device does not support a specific operation mode, the write interaction to this attribute
+             * with an unsupported operation mode value shall be ignored and a response containing the status of
+             * CONSTRAINT_ERROR shall be returned.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.22
+             */
+            readonly operationMode: WritableAttribute<OperationMode, any>;
+            /**
+             * This attribute specifies the control mode of the pump as defined in ControlModeEnum.
+             *
+             * See the OperationMode attribute for a detailed description of the operation and control of the
+             *
+             * pump.
+             *
+             * ControlMode may be changed at any time, even when the pump is running. The behavior of the pump at the
+             * point of changing is vendor-specific.
+             *
+             * In the case a device does not support a specific control mode, the write interaction to this attribute
+             * with an unsupported control mode value shall be ignored and a response containing the status of
+             * CONSTRAINT_ERROR shall be returned.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.23
+             */
+            readonly controlMode: OptionalWritableAttribute<ControlMode, any>;
+        };
+        readonly events: {
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly supplyVoltageLow: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly supplyVoltageHigh: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly powerMissingPhase: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly systemPressureLow: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly systemPressureHigh: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly dryRunning: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly motorTemperatureHigh: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly pumpMotorFatalFailure: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly electronicTemperatureHigh: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly pumpBlocked: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly sensorFailure: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly electronicNonFatalFailure: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly electronicFatalFailure: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly generalFault: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly leakage: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly airDetection: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly turbineOperation: OptionalEvent<void, any>;
+        };
+        /**
+         * This metadata controls which PumpConfigurationAndControlCluster elements matter.js activates for specific
+         * feature combinations.
+         */
+        readonly extensions: readonly [{
+            readonly flags: {
+                readonly constantPressure: true;
+            };
+            readonly component: {
+                readonly attributes: {
+                    /**
+                     * This attribute specifies the minimum pressure the pump can achieve when it is working with the
+                     * ControlMode attribute set to ConstantPressure.
+                     *
+                     * Valid range is –3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.4
+                     */
+                    readonly minConstPressure: FixedAttribute<number | null, any>;
+                    /**
+                     * This attribute specifies the maximum pressure the pump can achieve when it is working with the
+                     * ControlMode attribute set to ConstantPressure.
+                     *
+                     * Valid range is –3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.5
+                     */
+                    readonly maxConstPressure: FixedAttribute<number | null, any>;
+                };
+            };
+        }, {
+            readonly flags: {
+                readonly automatic: true;
+            };
+            readonly component: {
+                readonly attributes: {
+                    /**
+                     * This attribute specifies the minimum pressure the pump can achieve when it is working with the
+                     * ControlMode attribute set to ConstantPressure.
+                     *
+                     * Valid range is –3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.4
+                     */
+                    readonly minConstPressure: OptionalFixedAttribute<number | null, any>;
+                    /**
+                     * This attribute specifies the maximum pressure the pump can achieve when it is working with the
+                     * ControlMode attribute set to ConstantPressure.
+                     *
+                     * Valid range is –3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.5
+                     */
+                    readonly maxConstPressure: OptionalFixedAttribute<number | null, any>;
+                    /**
+                     * This attribute specifies the minimum compensated pressure the pump can achieve when it is working with
+                     * the ControlMode attribute set to ProportionalPressure.
+                     *
+                     * Valid range is –3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.6
+                     */
+                    readonly minCompPressure: OptionalFixedAttribute<number | null, any>;
+                    /**
+                     * This attribute specifies the maximum compensated pressure the pump can achieve when it is working with
+                     * the ControlMode attribute set to ProportionalPressure.
+                     *
+                     * Valid range is –3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.7
+                     */
+                    readonly maxCompPressure: OptionalFixedAttribute<number | null, any>;
+                    /**
+                     * This attribute specifies the minimum speed the pump can achieve when it is working with the ControlMode
+                     * attribute set to ConstantSpeed.
+                     *
+                     * Valid range is 0 to 65,534 RPM (steps of 1 RPM). Null if the value is invalid.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.8
+                     */
+                    readonly minConstSpeed: OptionalFixedAttribute<number | null, any>;
+                    /**
+                     * This attribute specifies the maximum speed the pump can achieve when it is working with the ControlMode
+                     * attribute set to ConstantSpeed.
+                     *
+                     * Valid range is 0 to 65,534 RPM (steps of 1 RPM). Null if the value is invalid.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.9
+                     */
+                    readonly maxConstSpeed: OptionalFixedAttribute<number | null, any>;
+                    /**
+                     * This attribute specifies the minimum flow the pump can achieve when it is working with the Con
+                     *
+                     * trolMode attribute set to ConstantFlow.
+                     *
+                     * Valid range is 0 m/h to 6,553.4 m/h (steps of 0.1 m/h). Null if the value is invalid.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.10
+                     */
+                    readonly minConstFlow: OptionalFixedAttribute<number | null, any>;
+                    /**
+                     * This attribute specifies the maximum flow the pump can achieve when it is working with the ControlMode
+                     * attribute set to ConstantFlow.
+                     *
+                     * Valid range is 0 m/h to 6,553.4 m/h (steps of 0.1 m/h). Null if the value is invalid.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.11
+                     */
+                    readonly maxConstFlow: OptionalFixedAttribute<number | null, any>;
+                    /**
+                     * This attribute specifies the minimum temperature the pump can maintain in the system when it is working
+                     * with the ControlMode attribute set to ConstantTemperature.
+                     *
+                     * Valid range is –273.15 °C to 327.67 °C (steps of 0.01 °C). Null if the value is invalid.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.12
+                     */
+                    readonly minConstTemp: OptionalFixedAttribute<number | null, any>;
+                    /**
+                     * This attribute specifies the maximum temperature the pump can maintain in the system when it is working
+                     * with the ControlMode attribute set to ConstantTemperature.
+                     *
+                     * MaxConstTemp shall be greater than or equal to MinConstTemp
+                     *
+                     * Valid range is –273.15 °C to 327.67 °C (steps of 0.01 °C). Null if the value is invalid.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.13
+                     */
+                    readonly maxConstTemp: OptionalFixedAttribute<number | null, any>;
+                };
+            };
+        }, {
+            readonly flags: {
+                readonly compensatedPressure: true;
+            };
+            readonly component: {
+                readonly attributes: {
+                    /**
+                     * This attribute specifies the minimum compensated pressure the pump can achieve when it is working with
+                     * the ControlMode attribute set to ProportionalPressure.
+                     *
+                     * Valid range is –3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.6
+                     */
+                    readonly minCompPressure: FixedAttribute<number | null, any>;
+                    /**
+                     * This attribute specifies the maximum compensated pressure the pump can achieve when it is working with
+                     * the ControlMode attribute set to ProportionalPressure.
+                     *
+                     * Valid range is –3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.7
+                     */
+                    readonly maxCompPressure: FixedAttribute<number | null, any>;
+                };
+            };
+        }, {
+            readonly flags: {
+                readonly constantSpeed: true;
+            };
+            readonly component: {
+                readonly attributes: {
+                    /**
+                     * This attribute specifies the minimum speed the pump can achieve when it is working with the ControlMode
+                     * attribute set to ConstantSpeed.
+                     *
+                     * Valid range is 0 to 65,534 RPM (steps of 1 RPM). Null if the value is invalid.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.8
+                     */
+                    readonly minConstSpeed: FixedAttribute<number | null, any>;
+                    /**
+                     * This attribute specifies the maximum speed the pump can achieve when it is working with the ControlMode
+                     * attribute set to ConstantSpeed.
+                     *
+                     * Valid range is 0 to 65,534 RPM (steps of 1 RPM). Null if the value is invalid.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.9
+                     */
+                    readonly maxConstSpeed: FixedAttribute<number | null, any>;
+                };
+            };
+        }, {
+            readonly flags: {
+                readonly constantFlow: true;
+            };
+            readonly component: {
+                readonly attributes: {
+                    /**
+                     * This attribute specifies the minimum flow the pump can achieve when it is working with the Con
+                     *
+                     * trolMode attribute set to ConstantFlow.
+                     *
+                     * Valid range is 0 m/h to 6,553.4 m/h (steps of 0.1 m/h). Null if the value is invalid.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.10
+                     */
+                    readonly minConstFlow: FixedAttribute<number | null, any>;
+                    /**
+                     * This attribute specifies the maximum flow the pump can achieve when it is working with the ControlMode
+                     * attribute set to ConstantFlow.
+                     *
+                     * Valid range is 0 m/h to 6,553.4 m/h (steps of 0.1 m/h). Null if the value is invalid.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.11
+                     */
+                    readonly maxConstFlow: FixedAttribute<number | null, any>;
+                };
+            };
+        }, {
+            readonly flags: {
+                readonly constantTemperature: true;
+            };
+            readonly component: {
+                readonly attributes: {
+                    /**
+                     * This attribute specifies the minimum temperature the pump can maintain in the system when it is working
+                     * with the ControlMode attribute set to ConstantTemperature.
+                     *
+                     * Valid range is –273.15 °C to 327.67 °C (steps of 0.01 °C). Null if the value is invalid.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.12
+                     */
+                    readonly minConstTemp: FixedAttribute<number | null, any>;
+                    /**
+                     * This attribute specifies the maximum temperature the pump can maintain in the system when it is working
+                     * with the ControlMode attribute set to ConstantTemperature.
+                     *
+                     * MaxConstTemp shall be greater than or equal to MinConstTemp
+                     *
+                     * Valid range is –273.15 °C to 327.67 °C (steps of 0.01 °C). Null if the value is invalid.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.13
+                     */
+                    readonly maxConstTemp: FixedAttribute<number | null, any>;
+                };
+            };
+        }, {
+            readonly flags: {
+                readonly constantPressure: false;
+                readonly compensatedPressure: false;
+                readonly constantFlow: false;
+                readonly constantSpeed: false;
+                readonly constantTemperature: false;
+            };
+            readonly component: false;
+        }];
+    };
+    /**
+     * @see {@link Cluster}
+     */
+    const ClusterInstance: MutableCluster.ExtensibleOnly<{
+        readonly id: 512;
+        readonly name: "PumpConfigurationAndControl";
+        readonly revision: 4;
+        readonly features: {
+            /**
+             * ConstantPressure
+             *
+             * Supports operating in constant pressure mode
+             */
+            readonly constantPressure: BitFlag;
+            /**
+             * CompensatedPressure
+             *
+             * Supports operating in compensated pressure mode
+             */
+            readonly compensatedPressure: BitFlag;
+            /**
+             * ConstantFlow
+             *
+             * Supports operating in constant flow mode
+             */
+            readonly constantFlow: BitFlag;
+            /**
+             * ConstantSpeed
+             *
+             * Supports operating in constant speed mode
+             */
+            readonly constantSpeed: BitFlag;
+            /**
+             * ConstantTemperature
+             *
+             * Supports operating in constant temperature mode
+             */
+            readonly constantTemperature: BitFlag;
+            /**
+             * Automatic
+             *
+             * Supports operating in automatic mode
+             */
+            readonly automatic: BitFlag;
+            /**
+             * LocalOperation
+             *
+             * Supports operating using local settings
+             */
+            readonly localOperation: BitFlag;
+        };
+        readonly attributes: {
+            /**
+             * This attribute specifies the maximum pressure the pump can achieve. It is a physical limit, and does not
+             * apply to any specific control mode or operation mode.
+             *
+             * Valid range is -3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.1
+             */
+            readonly maxPressure: FixedAttribute<number | null, any>;
+            /**
+             * This attribute specifies the maximum speed the pump can achieve. It is a physical limit, and does not
+             * apply to any specific control mode or operation mode.
+             *
+             * Valid range is 0 to 65,534 RPM (steps of 1 RPM). Null if the value is invalid.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.2
+             */
+            readonly maxSpeed: FixedAttribute<number | null, any>;
+            /**
+             * This attribute specifies the maximum flow the pump can achieve. It is a physical limit, and does not
+             * apply to any specific control mode or operation mode.
+             *
+             * Valid range is 0 m/h to 6,553.4 m/h (steps of 0.1 m/h). Null if the value is invalid.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.3
+             */
+            readonly maxFlow: FixedAttribute<number | null, any>;
+            /**
+             * This attribute specifies the activity status of the pump functions as listed in PumpStatusBitmap. Where
+             * a pump controller function is active, the corresponding bit shall be set to 1. Where a pump controller
+             * function is not active, the corresponding bit shall be set to 0.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.14
+             */
+            readonly pumpStatus: OptionalAttribute<import("../schema/BitmapSchema.js").TypeFromPartialBitSchema<{
+                /**
+                 * A fault related to the system or pump device is detected.
+                 *
+                 * If this bit is set, it may correspond to an event in the range 2-16, see Events.
+                 *
+                 * @see {@link MatterSpecification.v13.Cluster} § 4.2.6.1.1
+                 */
+                deviceFault: BitFlag;
+                /**
+                 * A fault related to the supply to the pump is detected.
+                 *
+                 * If this bit is set, it may correspond to an event in the range 0-1 or 13, see Events.
+                 *
+                 * @see {@link MatterSpecification.v13.Cluster} § 4.2.6.1.2
+                 */
+                supplyFault: BitFlag;
+                /**
+                 * Setpoint is too low to achieve.
+                 */
+                speedLow: BitFlag;
+                /**
+                 * Setpoint is too high to achieve.
+                 */
+                speedHigh: BitFlag;
+                /**
+                 * Device control is overridden by hardware, such as an external STOP button or via a local HMI.
+                 *
+                 * While this bit is set, the EffectiveOperationMode is adjusted to Local. Any request changing OperationMode
+                 * shall generate a FAILURE error status until LocalOverride is cleared on the physical device. When
+                 * LocalOverride is cleared, the device shall return to the operation mode set in OperationMode.
+                 *
+                 * @see {@link MatterSpecification.v13.Cluster} § 4.2.6.1.3
+                 */
+                localOverride: BitFlag;
+                /**
+                 * Pump is currently running
+                 */
+                running: BitFlag;
+                /**
+                 * A remote pressure sensor is used as the sensor for the regulation of the pump.
+                 *
+                 * If this bit is set, EffectiveControlMode is ConstantPressure and the setpoint for the pump is interpreted as
+                 * a percentage of the range of the remote sensor ([MinMeasuredValue – MaxMeasuredValue]).
+                 *
+                 * @see {@link MatterSpecification.v13.Cluster} § 4.2.6.1.4
+                 */
+                remotePressure: BitFlag;
+                /**
+                 * A remote flow sensor is used as the sensor for the regulation of the pump.
+                 *
+                 * If this bit is set, EffectiveControlMode is ConstantFlow, and the setpoint for the pump is interpreted as a
+                 * percentage of the range of the remote sensor ([MinMeasuredValue – MaxMeasuredValue]).
+                 *
+                 * @see {@link MatterSpecification.v13.Cluster} § 4.2.6.1.5
+                 */
+                remoteFlow: BitFlag;
+                /**
+                 * A remote temperature sensor is used as the sensor for the regulation of the pump.
+                 *
+                 * If this bit is set, EffectiveControlMode is ConstantTemperature, and the setpoint for the pump is
+                 * interpreted as a percentage of the range of the remote sensor ([MinMeasuredValue – MaxMeasuredValue])
+                 *
+                 * @see {@link MatterSpecification.v13.Cluster} § 4.2.6.1.6
+                 */
+                remoteTemperature: BitFlag;
+            }>, any>;
+            /**
+             * This attribute specifies current effective operation mode of the pump as defined in OperationModeEnum.
+             *
+             * The value of the EffectiveOperationMode attribute is the same as the OperationMode attribute, unless one
+             * of the following points are true:
+             *
+             *   • The pump is physically set to run with the local settings
+             *
+             *   • The LocalOverride bit in the PumpStatus attribute is set,
+             *
+             * See OperationMode and ControlMode attributes for a detailed description of the operation and control of
+             * the pump.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.15
+             */
+            readonly effectiveOperationMode: Attribute<OperationMode, any>;
+            /**
+             * This attribute specifies the current effective control mode of the pump as defined in ControlModeEnum.
+             *
+             * This attribute contains the control mode that currently applies to the pump. It will have the value of
+             * the ControlMode attribute, unless one of the following points are true:
+             *
+             *   • The ControlMode attribute is set to Automatic. In this case, the value of the EffectiveControlMode
+             *     shall match the behavior of the pump.
+             *
+             *   • A remote sensor is used as the sensor for regulation of the pump. In this case, EffectiveControlMode
+             *     will display ConstantPressure, ConstantFlow or ConstantTemperature if the remote sensor is a
+             *     pressure sensor, a flow sensor or a temperature sensor respectively, regardless of the value of the
+             *     ControlMode attribute.
+             *
+             * In case the ControlMode attribute is not included on the device and no remote sensors are connected, the
+             * value of the EffectiveControlMode shall match the vendor-specific behavior of the pump.
+             *
+             * See OperationMode and ControlMode attributes for detailed a description of the operation and control of
+             * the pump.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.16
+             */
+            readonly effectiveControlMode: Attribute<ControlMode, any>;
+            /**
+             * This attribute specifies the actual capacity of the pump as a percentage of the effective maximum
+             * setpoint value. It is updated dynamically as the speed of the pump changes.
+             *
+             * If the value is not available (the measurement or estimation of the speed is done in the pump), this
+             * attribute will indicate the null value.
+             *
+             * Valid range is 0 % to 163.835% (0.005 % granularity). Although this attribute is a signed value, values
+             * of capacity less than zero have no physical meaning.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.17
+             */
+            readonly capacity: Attribute<number | null, any>;
+            /**
+             * This attribute specifies the actual speed of the pump measured in RPM. It is updated dynamically as the
+             * speed of the pump changes.
+             *
+             * If the value is not available (the measurement or estimation of the speed is done in the pump), this
+             * attribute will indicate the null value.
+             *
+             * Valid range is 0 to 65.534 RPM.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.18
+             */
+            readonly speed: OptionalAttribute<number | null, any>;
+            /**
+             * This attribute specifies the accumulated number of hours that the pump has been powered and the motor
+             * has been running. It is updated dynamically as it increases. It is preserved over power cycles of the
+             * pump. If LifeTimeRunningHours rises above maximum value it “rolls over” and starts at 0 (zero).
+             *
+             * This attribute is writeable, in order to allow setting to an appropriate value after maintenance. If
+             *
+             * the value is not available, this attribute will indicate the null value. Valid range is 0 to 16,777,214
+             * hrs.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.19
+             */
+            readonly lifetimeRunningHours: OptionalWritableAttribute<number | null, any>;
+            /**
+             * This attribute specifies the actual power consumption of the pump in Watts. The value of this attribute
+             * is updated dynamically as the power consumption of the pump changes.
+             *
+             * This attribute is read only. If the value is not available (the measurement of power consumption is not
+             * done in the pump), this attribute will indicate the null value.
+             *
+             * Valid range is 0 to 16,777,214 Watts.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.20
+             */
+            readonly power: OptionalAttribute<number | null, any>;
+            /**
+             * This attribute specifies the accumulated energy consumption of the pump through the entire lifetime of
+             * the pump in kWh. The value of the LifetimeEnergyConsumed attribute is updated dynamically as the energy
+             * consumption of the pump increases. If LifetimeEnergyConsumed rises above maximum value it “rolls over”
+             * and starts at 0 (zero).
+             *
+             * This attribute is writeable, in order to allow setting to an appropriate value after maintenance.
+             *
+             * Valid range is 0 kWh to 4,294,967,294 kWh.
+             *
+             * Null if the value is unknown.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.21
+             */
+            readonly lifetimeEnergyConsumed: OptionalWritableAttribute<number | null, any>;
+            /**
+             * This attribute specifies the operation mode of the pump as defined in OperationModeEnum.
+             *
+             * The actual operating mode of the pump is a result of the setting of the attributes OperationMode,
+             * ControlMode and the optional connection of a remote sensor. The operation and control is prioritized as
+             * shown in the scheme below:
+             *
+             * Priority Scheme of Pump Operation and Control
+             *
+             * If this attribute is Maximum, Minimum or Local, the OperationMode attribute decides how the pump is
+             * operated.
+             *
+             * If this attribute is Normal and a remote sensor is connected to the pump, the type of the remote sensor
+             * decides the control mode of the pump. A connected remote pressure sensor will make the pump run in
+             * control mode Constant pressure and vice versa for flow and temperature type sensors. This is regardless
+             * of the setting of the ControlMode attribute.
+             *
+             * If this attribute is Normal and no remote sensor is connected, the control mode of the pump is decided
+             * by the ControlMode attribute.
+             *
+             * OperationMode may be changed at any time, even when the pump is running. The behavior of the pump at the
+             * point of changing the value of this attribute is vendor-specific.
+             *
+             * In the case a device does not support a specific operation mode, the write interaction to this attribute
+             * with an unsupported operation mode value shall be ignored and a response containing the status of
+             * CONSTRAINT_ERROR shall be returned.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.22
+             */
+            readonly operationMode: WritableAttribute<OperationMode, any>;
+            /**
+             * This attribute specifies the control mode of the pump as defined in ControlModeEnum.
+             *
+             * See the OperationMode attribute for a detailed description of the operation and control of the
+             *
+             * pump.
+             *
+             * ControlMode may be changed at any time, even when the pump is running. The behavior of the pump at the
+             * point of changing is vendor-specific.
+             *
+             * In the case a device does not support a specific control mode, the write interaction to this attribute
+             * with an unsupported control mode value shall be ignored and a response containing the status of
+             * CONSTRAINT_ERROR shall be returned.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.23
+             */
+            readonly controlMode: OptionalWritableAttribute<ControlMode, any>;
+        };
+        readonly events: {
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly supplyVoltageLow: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly supplyVoltageHigh: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly powerMissingPhase: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly systemPressureLow: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly systemPressureHigh: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly dryRunning: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly motorTemperatureHigh: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly pumpMotorFatalFailure: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly electronicTemperatureHigh: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly pumpBlocked: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly sensorFailure: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly electronicNonFatalFailure: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly electronicFatalFailure: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly generalFault: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly leakage: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly airDetection: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly turbineOperation: OptionalEvent<void, any>;
+        };
+        /**
+         * This metadata controls which PumpConfigurationAndControlCluster elements matter.js activates for specific
+         * feature combinations.
+         */
+        readonly extensions: readonly [{
+            readonly flags: {
+                readonly constantPressure: true;
+            };
+            readonly component: {
+                readonly attributes: {
+                    /**
+                     * This attribute specifies the minimum pressure the pump can achieve when it is working with the
+                     * ControlMode attribute set to ConstantPressure.
+                     *
+                     * Valid range is –3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.4
+                     */
+                    readonly minConstPressure: FixedAttribute<number | null, any>;
+                    /**
+                     * This attribute specifies the maximum pressure the pump can achieve when it is working with the
+                     * ControlMode attribute set to ConstantPressure.
+                     *
+                     * Valid range is –3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.5
+                     */
+                    readonly maxConstPressure: FixedAttribute<number | null, any>;
+                };
+            };
+        }, {
+            readonly flags: {
+                readonly automatic: true;
+            };
+            readonly component: {
+                readonly attributes: {
+                    /**
+                     * This attribute specifies the minimum pressure the pump can achieve when it is working with the
+                     * ControlMode attribute set to ConstantPressure.
+                     *
+                     * Valid range is –3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.4
+                     */
+                    readonly minConstPressure: OptionalFixedAttribute<number | null, any>;
+                    /**
+                     * This attribute specifies the maximum pressure the pump can achieve when it is working with the
+                     * ControlMode attribute set to ConstantPressure.
+                     *
+                     * Valid range is –3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.5
+                     */
+                    readonly maxConstPressure: OptionalFixedAttribute<number | null, any>;
+                    /**
+                     * This attribute specifies the minimum compensated pressure the pump can achieve when it is working with
+                     * the ControlMode attribute set to ProportionalPressure.
+                     *
+                     * Valid range is –3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.6
+                     */
+                    readonly minCompPressure: OptionalFixedAttribute<number | null, any>;
+                    /**
+                     * This attribute specifies the maximum compensated pressure the pump can achieve when it is working with
+                     * the ControlMode attribute set to ProportionalPressure.
+                     *
+                     * Valid range is –3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.7
+                     */
+                    readonly maxCompPressure: OptionalFixedAttribute<number | null, any>;
+                    /**
+                     * This attribute specifies the minimum speed the pump can achieve when it is working with the ControlMode
+                     * attribute set to ConstantSpeed.
+                     *
+                     * Valid range is 0 to 65,534 RPM (steps of 1 RPM). Null if the value is invalid.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.8
+                     */
+                    readonly minConstSpeed: OptionalFixedAttribute<number | null, any>;
+                    /**
+                     * This attribute specifies the maximum speed the pump can achieve when it is working with the ControlMode
+                     * attribute set to ConstantSpeed.
+                     *
+                     * Valid range is 0 to 65,534 RPM (steps of 1 RPM). Null if the value is invalid.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.9
+                     */
+                    readonly maxConstSpeed: OptionalFixedAttribute<number | null, any>;
+                    /**
+                     * This attribute specifies the minimum flow the pump can achieve when it is working with the Con
+                     *
+                     * trolMode attribute set to ConstantFlow.
+                     *
+                     * Valid range is 0 m/h to 6,553.4 m/h (steps of 0.1 m/h). Null if the value is invalid.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.10
+                     */
+                    readonly minConstFlow: OptionalFixedAttribute<number | null, any>;
+                    /**
+                     * This attribute specifies the maximum flow the pump can achieve when it is working with the ControlMode
+                     * attribute set to ConstantFlow.
+                     *
+                     * Valid range is 0 m/h to 6,553.4 m/h (steps of 0.1 m/h). Null if the value is invalid.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.11
+                     */
+                    readonly maxConstFlow: OptionalFixedAttribute<number | null, any>;
+                    /**
+                     * This attribute specifies the minimum temperature the pump can maintain in the system when it is working
+                     * with the ControlMode attribute set to ConstantTemperature.
+                     *
+                     * Valid range is –273.15 °C to 327.67 °C (steps of 0.01 °C). Null if the value is invalid.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.12
+                     */
+                    readonly minConstTemp: OptionalFixedAttribute<number | null, any>;
+                    /**
+                     * This attribute specifies the maximum temperature the pump can maintain in the system when it is working
+                     * with the ControlMode attribute set to ConstantTemperature.
+                     *
+                     * MaxConstTemp shall be greater than or equal to MinConstTemp
+                     *
+                     * Valid range is –273.15 °C to 327.67 °C (steps of 0.01 °C). Null if the value is invalid.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.13
+                     */
+                    readonly maxConstTemp: OptionalFixedAttribute<number | null, any>;
+                };
+            };
+        }, {
+            readonly flags: {
+                readonly compensatedPressure: true;
+            };
+            readonly component: {
+                readonly attributes: {
+                    /**
+                     * This attribute specifies the minimum compensated pressure the pump can achieve when it is working with
+                     * the ControlMode attribute set to ProportionalPressure.
+                     *
+                     * Valid range is –3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.6
+                     */
+                    readonly minCompPressure: FixedAttribute<number | null, any>;
+                    /**
+                     * This attribute specifies the maximum compensated pressure the pump can achieve when it is working with
+                     * the ControlMode attribute set to ProportionalPressure.
+                     *
+                     * Valid range is –3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.7
+                     */
+                    readonly maxCompPressure: FixedAttribute<number | null, any>;
+                };
+            };
+        }, {
+            readonly flags: {
+                readonly constantSpeed: true;
+            };
+            readonly component: {
+                readonly attributes: {
+                    /**
+                     * This attribute specifies the minimum speed the pump can achieve when it is working with the ControlMode
+                     * attribute set to ConstantSpeed.
+                     *
+                     * Valid range is 0 to 65,534 RPM (steps of 1 RPM). Null if the value is invalid.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.8
+                     */
+                    readonly minConstSpeed: FixedAttribute<number | null, any>;
+                    /**
+                     * This attribute specifies the maximum speed the pump can achieve when it is working with the ControlMode
+                     * attribute set to ConstantSpeed.
+                     *
+                     * Valid range is 0 to 65,534 RPM (steps of 1 RPM). Null if the value is invalid.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.9
+                     */
+                    readonly maxConstSpeed: FixedAttribute<number | null, any>;
+                };
+            };
+        }, {
+            readonly flags: {
+                readonly constantFlow: true;
+            };
+            readonly component: {
+                readonly attributes: {
+                    /**
+                     * This attribute specifies the minimum flow the pump can achieve when it is working with the Con
+                     *
+                     * trolMode attribute set to ConstantFlow.
+                     *
+                     * Valid range is 0 m/h to 6,553.4 m/h (steps of 0.1 m/h). Null if the value is invalid.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.10
+                     */
+                    readonly minConstFlow: FixedAttribute<number | null, any>;
+                    /**
+                     * This attribute specifies the maximum flow the pump can achieve when it is working with the ControlMode
+                     * attribute set to ConstantFlow.
+                     *
+                     * Valid range is 0 m/h to 6,553.4 m/h (steps of 0.1 m/h). Null if the value is invalid.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.11
+                     */
+                    readonly maxConstFlow: FixedAttribute<number | null, any>;
+                };
+            };
+        }, {
+            readonly flags: {
+                readonly constantTemperature: true;
+            };
+            readonly component: {
+                readonly attributes: {
+                    /**
+                     * This attribute specifies the minimum temperature the pump can maintain in the system when it is working
+                     * with the ControlMode attribute set to ConstantTemperature.
+                     *
+                     * Valid range is –273.15 °C to 327.67 °C (steps of 0.01 °C). Null if the value is invalid.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.12
+                     */
+                    readonly minConstTemp: FixedAttribute<number | null, any>;
+                    /**
+                     * This attribute specifies the maximum temperature the pump can maintain in the system when it is working
+                     * with the ControlMode attribute set to ConstantTemperature.
+                     *
+                     * MaxConstTemp shall be greater than or equal to MinConstTemp
+                     *
+                     * Valid range is –273.15 °C to 327.67 °C (steps of 0.01 °C). Null if the value is invalid.
+                     *
+                     * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.13
+                     */
+                    readonly maxConstTemp: FixedAttribute<number | null, any>;
+                };
+            };
+        }, {
+            readonly flags: {
+                readonly constantPressure: false;
+                readonly compensatedPressure: false;
+                readonly constantFlow: false;
+                readonly constantSpeed: false;
+                readonly constantTemperature: false;
+            };
+            readonly component: false;
+        }];
+    }>;
+    /**
+     * The Pump Configuration and Control cluster provides an interface for the setup and control of pump devices, and
+     * the automatic reporting of pump status information. Note that control of pump speed is not included – speed is
+     * controlled by the On/Off and Level Control clusters.
+     *
+     * Per the Matter specification you cannot use {@link PumpConfigurationAndControlCluster} without enabling certain
+     * feature combinations. You must use the {@link with} factory method to obtain a working cluster.
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.2
+     */
+    interface Cluster extends Identity<typeof ClusterInstance> {
+    }
+    const Cluster: Cluster;
+    /**
+     * @see {@link Complete}
+     */
+    const CompleteInstance: MutableCluster<{
+        readonly id: 512;
+        readonly name: "PumpConfigurationAndControl";
+        readonly revision: 4;
+        readonly features: {
+            /**
+             * ConstantPressure
+             *
+             * Supports operating in constant pressure mode
+             */
+            readonly constantPressure: BitFlag;
+            /**
+             * CompensatedPressure
+             *
+             * Supports operating in compensated pressure mode
+             */
+            readonly compensatedPressure: BitFlag;
+            /**
+             * ConstantFlow
+             *
+             * Supports operating in constant flow mode
+             */
+            readonly constantFlow: BitFlag;
+            /**
+             * ConstantSpeed
+             *
+             * Supports operating in constant speed mode
+             */
+            readonly constantSpeed: BitFlag;
+            /**
+             * ConstantTemperature
+             *
+             * Supports operating in constant temperature mode
+             */
+            readonly constantTemperature: BitFlag;
+            /**
+             * Automatic
+             *
+             * Supports operating in automatic mode
+             */
+            readonly automatic: BitFlag;
+            /**
+             * LocalOperation
+             *
+             * Supports operating using local settings
+             */
+            readonly localOperation: BitFlag;
+        };
+        readonly attributes: {
+            readonly minConstPressure: FixedAttribute<number | null, any> & {
+                readonly optional: true;
+                readonly isConditional: true;
+                readonly optionalIf: [] | [{
+                    automatic: boolean;
+                }];
+                readonly mandatoryIf: [] | [{
+                    constantPressure: boolean;
+                }];
+            };
+            readonly maxConstPressure: FixedAttribute<number | null, any> & {
+                readonly optional: true;
+                readonly isConditional: true;
+                readonly optionalIf: [] | [{
+                    automatic: boolean;
+                }];
+                readonly mandatoryIf: [] | [{
+                    constantPressure: boolean;
+                }];
+            };
+            readonly minCompPressure: OptionalFixedAttribute<number | null, any> & {
+                readonly optional: true;
+                readonly isConditional: true;
+                readonly optionalIf: [] | [{
+                    automatic: boolean;
+                }];
+                readonly mandatoryIf: [] | [{
+                    compensatedPressure: boolean;
+                }];
+            };
+            readonly maxCompPressure: OptionalFixedAttribute<number | null, any> & {
+                readonly optional: true;
+                readonly isConditional: true;
+                readonly optionalIf: [] | [{
+                    automatic: boolean;
+                }];
+                readonly mandatoryIf: [] | [{
+                    compensatedPressure: boolean;
+                }];
+            };
+            readonly minConstSpeed: OptionalFixedAttribute<number | null, any> & {
+                readonly optional: true;
+                readonly isConditional: true;
+                readonly optionalIf: [] | [{
+                    automatic: boolean;
+                }];
+                readonly mandatoryIf: [] | [{
+                    constantSpeed: boolean;
+                }];
+            };
+            readonly maxConstSpeed: OptionalFixedAttribute<number | null, any> & {
+                readonly optional: true;
+                readonly isConditional: true;
+                readonly optionalIf: [] | [{
+                    automatic: boolean;
+                }];
+                readonly mandatoryIf: [] | [{
+                    constantSpeed: boolean;
+                }];
+            };
+            readonly minConstFlow: OptionalFixedAttribute<number | null, any> & {
+                readonly optional: true;
+                readonly isConditional: true;
+                readonly optionalIf: [] | [{
+                    automatic: boolean;
+                }];
+                readonly mandatoryIf: [] | [{
+                    constantFlow: boolean;
+                }];
+            };
+            readonly maxConstFlow: OptionalFixedAttribute<number | null, any> & {
+                readonly optional: true;
+                readonly isConditional: true;
+                readonly optionalIf: [] | [{
+                    automatic: boolean;
+                }];
+                readonly mandatoryIf: [] | [{
+                    constantFlow: boolean;
+                }];
+            };
+            readonly minConstTemp: OptionalFixedAttribute<number | null, any> & {
+                readonly optional: true;
+                readonly isConditional: true;
+                readonly optionalIf: [] | [{
+                    automatic: boolean;
+                }];
+                readonly mandatoryIf: [] | [{
+                    constantTemperature: boolean;
+                }];
+            };
+            readonly maxConstTemp: OptionalFixedAttribute<number | null, any> & {
+                readonly optional: true;
+                readonly isConditional: true;
+                readonly optionalIf: [] | [{
+                    automatic: boolean;
+                }];
+                readonly mandatoryIf: [] | [{
+                    constantTemperature: boolean;
+                }];
+            };
+            /**
+             * This attribute specifies the maximum pressure the pump can achieve. It is a physical limit, and does not
+             * apply to any specific control mode or operation mode.
+             *
+             * Valid range is -3,276.7 kPa to 3,276.7 kPa (steps of 0.1 kPa). Null if the value is invalid.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.1
+             */
+            readonly maxPressure: FixedAttribute<number | null, any>;
+            /**
+             * This attribute specifies the maximum speed the pump can achieve. It is a physical limit, and does not
+             * apply to any specific control mode or operation mode.
+             *
+             * Valid range is 0 to 65,534 RPM (steps of 1 RPM). Null if the value is invalid.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.2
+             */
+            readonly maxSpeed: FixedAttribute<number | null, any>;
+            /**
+             * This attribute specifies the maximum flow the pump can achieve. It is a physical limit, and does not
+             * apply to any specific control mode or operation mode.
+             *
+             * Valid range is 0 m/h to 6,553.4 m/h (steps of 0.1 m/h). Null if the value is invalid.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.3
+             */
+            readonly maxFlow: FixedAttribute<number | null, any>;
+            /**
+             * This attribute specifies the activity status of the pump functions as listed in PumpStatusBitmap. Where
+             * a pump controller function is active, the corresponding bit shall be set to 1. Where a pump controller
+             * function is not active, the corresponding bit shall be set to 0.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.14
+             */
+            readonly pumpStatus: OptionalAttribute<import("../schema/BitmapSchema.js").TypeFromPartialBitSchema<{
+                /**
+                 * A fault related to the system or pump device is detected.
+                 *
+                 * If this bit is set, it may correspond to an event in the range 2-16, see Events.
+                 *
+                 * @see {@link MatterSpecification.v13.Cluster} § 4.2.6.1.1
+                 */
+                deviceFault: BitFlag;
+                /**
+                 * A fault related to the supply to the pump is detected.
+                 *
+                 * If this bit is set, it may correspond to an event in the range 0-1 or 13, see Events.
+                 *
+                 * @see {@link MatterSpecification.v13.Cluster} § 4.2.6.1.2
+                 */
+                supplyFault: BitFlag;
+                /**
+                 * Setpoint is too low to achieve.
+                 */
+                speedLow: BitFlag;
+                /**
+                 * Setpoint is too high to achieve.
+                 */
+                speedHigh: BitFlag;
+                /**
+                 * Device control is overridden by hardware, such as an external STOP button or via a local HMI.
+                 *
+                 * While this bit is set, the EffectiveOperationMode is adjusted to Local. Any request changing OperationMode
+                 * shall generate a FAILURE error status until LocalOverride is cleared on the physical device. When
+                 * LocalOverride is cleared, the device shall return to the operation mode set in OperationMode.
+                 *
+                 * @see {@link MatterSpecification.v13.Cluster} § 4.2.6.1.3
+                 */
+                localOverride: BitFlag;
+                /**
+                 * Pump is currently running
+                 */
+                running: BitFlag;
+                /**
+                 * A remote pressure sensor is used as the sensor for the regulation of the pump.
+                 *
+                 * If this bit is set, EffectiveControlMode is ConstantPressure and the setpoint for the pump is interpreted as
+                 * a percentage of the range of the remote sensor ([MinMeasuredValue – MaxMeasuredValue]).
+                 *
+                 * @see {@link MatterSpecification.v13.Cluster} § 4.2.6.1.4
+                 */
+                remotePressure: BitFlag;
+                /**
+                 * A remote flow sensor is used as the sensor for the regulation of the pump.
+                 *
+                 * If this bit is set, EffectiveControlMode is ConstantFlow, and the setpoint for the pump is interpreted as a
+                 * percentage of the range of the remote sensor ([MinMeasuredValue – MaxMeasuredValue]).
+                 *
+                 * @see {@link MatterSpecification.v13.Cluster} § 4.2.6.1.5
+                 */
+                remoteFlow: BitFlag;
+                /**
+                 * A remote temperature sensor is used as the sensor for the regulation of the pump.
+                 *
+                 * If this bit is set, EffectiveControlMode is ConstantTemperature, and the setpoint for the pump is
+                 * interpreted as a percentage of the range of the remote sensor ([MinMeasuredValue – MaxMeasuredValue])
+                 *
+                 * @see {@link MatterSpecification.v13.Cluster} § 4.2.6.1.6
+                 */
+                remoteTemperature: BitFlag;
+            }>, any>;
+            /**
+             * This attribute specifies current effective operation mode of the pump as defined in OperationModeEnum.
+             *
+             * The value of the EffectiveOperationMode attribute is the same as the OperationMode attribute, unless one
+             * of the following points are true:
+             *
+             *   • The pump is physically set to run with the local settings
+             *
+             *   • The LocalOverride bit in the PumpStatus attribute is set,
+             *
+             * See OperationMode and ControlMode attributes for a detailed description of the operation and control of
+             * the pump.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.15
+             */
+            readonly effectiveOperationMode: Attribute<OperationMode, any>;
+            /**
+             * This attribute specifies the current effective control mode of the pump as defined in ControlModeEnum.
+             *
+             * This attribute contains the control mode that currently applies to the pump. It will have the value of
+             * the ControlMode attribute, unless one of the following points are true:
+             *
+             *   • The ControlMode attribute is set to Automatic. In this case, the value of the EffectiveControlMode
+             *     shall match the behavior of the pump.
+             *
+             *   • A remote sensor is used as the sensor for regulation of the pump. In this case, EffectiveControlMode
+             *     will display ConstantPressure, ConstantFlow or ConstantTemperature if the remote sensor is a
+             *     pressure sensor, a flow sensor or a temperature sensor respectively, regardless of the value of the
+             *     ControlMode attribute.
+             *
+             * In case the ControlMode attribute is not included on the device and no remote sensors are connected, the
+             * value of the EffectiveControlMode shall match the vendor-specific behavior of the pump.
+             *
+             * See OperationMode and ControlMode attributes for detailed a description of the operation and control of
+             * the pump.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.16
+             */
+            readonly effectiveControlMode: Attribute<ControlMode, any>;
+            /**
+             * This attribute specifies the actual capacity of the pump as a percentage of the effective maximum
+             * setpoint value. It is updated dynamically as the speed of the pump changes.
+             *
+             * If the value is not available (the measurement or estimation of the speed is done in the pump), this
+             * attribute will indicate the null value.
+             *
+             * Valid range is 0 % to 163.835% (0.005 % granularity). Although this attribute is a signed value, values
+             * of capacity less than zero have no physical meaning.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.17
+             */
+            readonly capacity: Attribute<number | null, any>;
+            /**
+             * This attribute specifies the actual speed of the pump measured in RPM. It is updated dynamically as the
+             * speed of the pump changes.
+             *
+             * If the value is not available (the measurement or estimation of the speed is done in the pump), this
+             * attribute will indicate the null value.
+             *
+             * Valid range is 0 to 65.534 RPM.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.18
+             */
+            readonly speed: OptionalAttribute<number | null, any>;
+            /**
+             * This attribute specifies the accumulated number of hours that the pump has been powered and the motor
+             * has been running. It is updated dynamically as it increases. It is preserved over power cycles of the
+             * pump. If LifeTimeRunningHours rises above maximum value it “rolls over” and starts at 0 (zero).
+             *
+             * This attribute is writeable, in order to allow setting to an appropriate value after maintenance. If
+             *
+             * the value is not available, this attribute will indicate the null value. Valid range is 0 to 16,777,214
+             * hrs.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.19
+             */
+            readonly lifetimeRunningHours: OptionalWritableAttribute<number | null, any>;
+            /**
+             * This attribute specifies the actual power consumption of the pump in Watts. The value of this attribute
+             * is updated dynamically as the power consumption of the pump changes.
+             *
+             * This attribute is read only. If the value is not available (the measurement of power consumption is not
+             * done in the pump), this attribute will indicate the null value.
+             *
+             * Valid range is 0 to 16,777,214 Watts.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.20
+             */
+            readonly power: OptionalAttribute<number | null, any>;
+            /**
+             * This attribute specifies the accumulated energy consumption of the pump through the entire lifetime of
+             * the pump in kWh. The value of the LifetimeEnergyConsumed attribute is updated dynamically as the energy
+             * consumption of the pump increases. If LifetimeEnergyConsumed rises above maximum value it “rolls over”
+             * and starts at 0 (zero).
+             *
+             * This attribute is writeable, in order to allow setting to an appropriate value after maintenance.
+             *
+             * Valid range is 0 kWh to 4,294,967,294 kWh.
+             *
+             * Null if the value is unknown.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.21
+             */
+            readonly lifetimeEnergyConsumed: OptionalWritableAttribute<number | null, any>;
+            /**
+             * This attribute specifies the operation mode of the pump as defined in OperationModeEnum.
+             *
+             * The actual operating mode of the pump is a result of the setting of the attributes OperationMode,
+             * ControlMode and the optional connection of a remote sensor. The operation and control is prioritized as
+             * shown in the scheme below:
+             *
+             * Priority Scheme of Pump Operation and Control
+             *
+             * If this attribute is Maximum, Minimum or Local, the OperationMode attribute decides how the pump is
+             * operated.
+             *
+             * If this attribute is Normal and a remote sensor is connected to the pump, the type of the remote sensor
+             * decides the control mode of the pump. A connected remote pressure sensor will make the pump run in
+             * control mode Constant pressure and vice versa for flow and temperature type sensors. This is regardless
+             * of the setting of the ControlMode attribute.
+             *
+             * If this attribute is Normal and no remote sensor is connected, the control mode of the pump is decided
+             * by the ControlMode attribute.
+             *
+             * OperationMode may be changed at any time, even when the pump is running. The behavior of the pump at the
+             * point of changing the value of this attribute is vendor-specific.
+             *
+             * In the case a device does not support a specific operation mode, the write interaction to this attribute
+             * with an unsupported operation mode value shall be ignored and a response containing the status of
+             * CONSTRAINT_ERROR shall be returned.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.22
+             */
+            readonly operationMode: WritableAttribute<OperationMode, any>;
+            /**
+             * This attribute specifies the control mode of the pump as defined in ControlModeEnum.
+             *
+             * See the OperationMode attribute for a detailed description of the operation and control of the
+             *
+             * pump.
+             *
+             * ControlMode may be changed at any time, even when the pump is running. The behavior of the pump at the
+             * point of changing is vendor-specific.
+             *
+             * In the case a device does not support a specific control mode, the write interaction to this attribute
+             * with an unsupported control mode value shall be ignored and a response containing the status of
+             * CONSTRAINT_ERROR shall be returned.
+             *
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.7.23
+             */
+            readonly controlMode: OptionalWritableAttribute<ControlMode, any>;
+        };
+        readonly events: {
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly supplyVoltageLow: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly supplyVoltageHigh: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly powerMissingPhase: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly systemPressureLow: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly systemPressureHigh: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly dryRunning: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly motorTemperatureHigh: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly pumpMotorFatalFailure: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly electronicTemperatureHigh: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly pumpBlocked: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly sensorFailure: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly electronicNonFatalFailure: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly electronicFatalFailure: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly generalFault: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly leakage: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly airDetection: OptionalEvent<void, any>;
+            /**
+             * @see {@link MatterSpecification.v13.Cluster} § 4.2.8
+             */
+            readonly turbineOperation: OptionalEvent<void, any>;
+        };
+    }, []>;
+    /**
+     * This cluster supports all PumpConfigurationAndControl features. It may support illegal feature combinations.
+     *
+     * If you use this cluster you must manually specify which features are active and ensure the set of active
+     * features is legal per the Matter specification.
+     */
+    interface Complete extends Identity<typeof CompleteInstance> {
+    }
+    const Complete: Complete;
+}
+export type PumpConfigurationAndControlCluster = PumpConfigurationAndControl.Cluster;
+export declare const PumpConfigurationAndControlCluster: PumpConfigurationAndControl.Cluster;
+//# sourceMappingURL=pump-configuration-and-control.d.ts.map