@matter/types 0.11.0-alpha.0-20241005-e3e4e4a7a

package/dist/esm/clusters/general-commissioning.js

@@ -0,0 +1,427 @@
+/**
+ * @license
+ * Copyright 2022-2024 Matter.js Authors
+ * SPDX-License-Identifier: Apache-2.0
+ */
+import { MutableCluster } from "../cluster/mutation/MutableCluster.js";
+import { WritableAttribute, FixedAttribute, Attribute, Command } from "../cluster/Cluster.js";
+import { TlvUInt64, TlvUInt16, TlvEnum } from "../tlv/TlvNumber.js";
+import { AccessLevel } from "#model";
+import { TlvField, TlvObject } from "../tlv/TlvObject.js";
+import { TlvBoolean } from "../tlv/TlvBoolean.js";
+import { TlvString } from "../tlv/TlvString.js";
+import { TlvNoArguments } from "../tlv/TlvNoArguments.js";
+import { ClusterRegistry } from "../cluster/ClusterRegistry.js";
+var GeneralCommissioning;
+((GeneralCommissioning2) => {
+  GeneralCommissioning2.TlvBasicCommissioningInfo = TlvObject({
+    /**
+     * This field shall contain a conservative initial duration (in seconds) to set in the FailSafe for the
+     * commissioning flow to complete successfully. This may vary depending on the speed or sleepiness of the
+     * Commissionee. This value, if used in the ArmFailSafe command’s ExpiryLengthSeconds field SHOULD allow a
+     * Commissioner to proceed with a nominal commissioning without having to-rearm the fail-safe, with some margin.
+     *
+     * @see {@link MatterSpecification.v13.Core} § 11.10.4.3.1
+     */
+    failSafeExpiryLengthSeconds: TlvField(0, TlvUInt16),
+    /**
+     * This field shall contain a conservative value in seconds denoting the maximum total duration for which a
+     * fail safe timer can be re-armed. See Section 11.10.6.2.1, “Fail Safe Context”.
+     *
+     * The value of this field shall be greater than or equal to the FailSafeExpiryLengthSeconds. Absent additional
+     * guidelines, it is recommended that the value of this field be aligned with the initial Announcement Duration
+     * and default to 900 seconds.
+     *
+     * @see {@link MatterSpecification.v13.Core} § 11.10.4.3.2
+     */
+    maxCumulativeFailsafeSeconds: TlvField(1, TlvUInt16)
+  });
+  let RegulatoryLocationType;
+  ((RegulatoryLocationType2) => {
+    RegulatoryLocationType2[RegulatoryLocationType2["Indoor"] = 0] = "Indoor";
+    RegulatoryLocationType2[RegulatoryLocationType2["Outdoor"] = 1] = "Outdoor";
+    RegulatoryLocationType2[RegulatoryLocationType2["IndoorOutdoor"] = 2] = "IndoorOutdoor";
+  })(RegulatoryLocationType = GeneralCommissioning2.RegulatoryLocationType || (GeneralCommissioning2.RegulatoryLocationType = {}));
+  GeneralCommissioning2.TlvArmFailSafeRequest = TlvObject({
+    expiryLengthSeconds: TlvField(0, TlvUInt16),
+    breadcrumb: TlvField(1, TlvUInt64)
+  });
+  let CommissioningError;
+  ((CommissioningError2) => {
+    CommissioningError2[CommissioningError2["Ok"] = 0] = "Ok";
+    CommissioningError2[CommissioningError2["ValueOutsideRange"] = 1] = "ValueOutsideRange";
+    CommissioningError2[CommissioningError2["InvalidAuthentication"] = 2] = "InvalidAuthentication";
+    CommissioningError2[CommissioningError2["NoFailSafe"] = 3] = "NoFailSafe";
+    CommissioningError2[CommissioningError2["BusyWithOtherAdmin"] = 4] = "BusyWithOtherAdmin";
+  })(CommissioningError = GeneralCommissioning2.CommissioningError || (GeneralCommissioning2.CommissioningError = {}));
+  GeneralCommissioning2.TlvArmFailSafeResponse = TlvObject({
+    /**
+     * This field shall contain the result of the operation, based on the behavior specified in the functional
+     * description of the ArmFailSafe command.
+     *
+     * @see {@link MatterSpecification.v13.Core} § 11.10.6.3.1
+     */
+    errorCode: TlvField(0, TlvEnum()),
+    /**
+     * See Section 11.10.6.1, “Common fields in General Commissioning cluster responses”.
+     *
+     * @see {@link MatterSpecification.v13.Core} § 11.10.6.3.2
+     */
+    debugText: TlvField(1, TlvString.bound({ maxLength: 128 }))
+  });
+  GeneralCommissioning2.TlvSetRegulatoryConfigRequest = TlvObject({
+    newRegulatoryConfig: TlvField(0, TlvEnum()),
+    countryCode: TlvField(1, TlvString.bound({ length: 2 })),
+    breadcrumb: TlvField(2, TlvUInt64)
+  });
+  GeneralCommissioning2.TlvSetRegulatoryConfigResponse = TlvObject({
+    /**
+     * This field shall contain the result of the operation, based on the behavior specified in the functional
+     * description of the SetRegulatoryConfig command.
+     *
+     * @see {@link MatterSpecification.v13.Core} § 11.10.6.5.1
+     */
+    errorCode: TlvField(0, TlvEnum()),
+    /**
+     * See Section 11.10.6.1, “Common fields in General Commissioning cluster responses”.
+     *
+     * @see {@link MatterSpecification.v13.Core} § 11.10.6.5.2
+     */
+    debugText: TlvField(1, TlvString)
+  });
+  GeneralCommissioning2.TlvCommissioningCompleteResponse = TlvObject({
+    /**
+     * This field shall contain the result of the operation, based on the behavior specified in the functional
+     * description of the CommissioningComplete command.
+     *
+     * @see {@link MatterSpecification.v13.Core} § 11.10.6.7.1
+     */
+    errorCode: TlvField(0, TlvEnum()),
+    /**
+     * See Section 11.10.6.1, “Common fields in General Commissioning cluster responses”.
+     *
+     * @see {@link MatterSpecification.v13.Core} § 11.10.6.7.2
+     */
+    debugText: TlvField(1, TlvString)
+  });
+  GeneralCommissioning2.ClusterInstance = MutableCluster({
+    id: 48,
+    name: "GeneralCommissioning",
+    revision: 1,
+    attributes: {
+      /**
+       * This attribute allows for the storage of a client-provided small payload which Administrators and
+       * Commissioners may write and then subsequently read, to keep track of their own progress. This may be
+       * used by the Commissioner to avoid repeating already-executed actions upon re-establishing a
+       * commissioning link after an error.
+       *
+       * On start/restart of the server, such as when a device is power-cycled, this attribute shall be reset to
+       * zero.
+       *
+       * Some commands related to commissioning also have a side-effect of updating or resetting this attribute
+       * and this is specified in their respective functional descriptions.
+       *
+       * The format of the value within this attribute is unspecified and its value is not otherwise used by the
+       * functioning of any cluster, other than being set as a side-effect of commands where this behavior is
+       * described.
+       *
+       * @see {@link MatterSpecification.v13.Core} § 11.10.5.1
+       */
+      breadcrumb: WritableAttribute(0, TlvUInt64, { default: 0, writeAcl: AccessLevel.Administer }),
+      /**
+       * This attribute shall describe critical parameters needed at the beginning of commissioning flow. See
+       * BasicCommissioningInfo for more information.
+       *
+       * @see {@link MatterSpecification.v13.Core} § 11.10.5.2
+       */
+      basicCommissioningInfo: FixedAttribute(1, GeneralCommissioning2.TlvBasicCommissioningInfo),
+      /**
+       * Indicates the regulatory configuration for the product.
+       *
+       * Note that the country code is part of Basic Information Cluster and therefore NOT listed on the
+       * RegulatoryConfig attribute.
+       *
+       * @see {@link MatterSpecification.v13.Core} § 11.10.5.3
+       */
+      regulatoryConfig: Attribute(2, TlvEnum()),
+      /**
+       * LocationCapability is statically set by the manufacturer and indicates if this Node needs to be told an
+       * exact RegulatoryLocation. For example a Node which is "Indoor Only" would not be certified for outdoor
+       * use at all, and thus there is no need for a commissioner to set or ask the user about whether the device
+       * will be used inside or outside. However a device which states its capability is "Indoor/Outdoor" means
+       * it would like clarification if possible.
+       *
+       * For Nodes without radio network interfaces (e.g. Ethernet-only devices), the value IndoorOutdoor shall
+       * always be used.
+       *
+       * The default value of the RegulatoryConfig attribute is the value of LocationCapability attribute. This
+       * means devices always have a safe default value, and Commissioners which choose to implement smarter
+       * handling can.
+       *
+       * @see {@link MatterSpecification.v13.Core} § 11.10.5.4
+       */
+      locationCapability: FixedAttribute(
+        3,
+        TlvEnum(),
+        { default: 2 /* IndoorOutdoor */ }
+      ),
+      /**
+       * Indicates whether this device supports "concurrent connection flow" commissioning mode (see Section 5.5,
+       * “Commissioning Flows”). If false, the device only supports "non-concurrent connection flow" mode.
+       *
+       * @see {@link MatterSpecification.v13.Core} § 11.10.5.5
+       */
+      supportsConcurrentConnection: FixedAttribute(4, TlvBoolean, { default: true })
+    },
+    commands: {
+      /**
+       * Success or failure of this command shall be communicated by the ArmFailSafeResponse command, unless some
+       * data model validations caused a failure status code to be issued during the processing of the command.
+       *
+       * If the fail-safe timer is not currently armed, the commissioning window is open, and the command was
+       * received over a CASE session, the command shall leave the current fail-safe state unchanged and
+       * immediately respond with an ArmFailSafeResponse containing an ErrorCode value of BusyWithOtherAdmin.
+       * This is done to allow commissioners, which use PASE connections, the opportunity to use the failsafe
+       * during the relatively short commissioning window.
+       *
+       * Otherwise, the command shall arm or re-arm the "fail-safe timer" with an expiry time set for a duration
+       * of ExpiryLengthSeconds, or disarm it, depending on the situation:
+       *
+       *   • If ExpiryLengthSeconds is 0 and the fail-safe timer was already armed and the accessing fabric
+       *     matches the Fabric currently associated with the fail-safe context, then the fail-safe timer
+       *
+       * shall be immediately expired (see further below for side-effects of expiration).
+       *
+       *   • If ExpiryLengthSeconds is 0 and the fail-safe timer was not armed, then this command invocation
+       *     shall lead to a success response with no side-effects against the fail-safe context.
+       *
+       *   • If ExpiryLengthSeconds is non-zero and the fail-safe timer was not currently armed, then the
+       *     fail-safe timer shall be armed for that duration.
+       *
+       *   • If ExpiryLengthSeconds is non-zero and the fail-safe timer was currently armed, and the accessing
+       *     Fabric matches the fail-safe context’s associated Fabric, then the fail-safe timer shall be re-
+       *     armed to expire in ExpiryLengthSeconds.
+       *
+       *   • Otherwise, the command shall leave the current fail-safe state unchanged and immediately respond
+       *     with ArmFailSafeResponse containing an ErrorCode value of BusyWithOtherAdmin, indicating a likely
+       *     conflict between commissioners.
+       *
+       * The value of the Breadcrumb field shall be written to the Breadcrumb Attribute on successful execution
+       * of the command.
+       *
+       * If the receiver restarts unexpectedly (e.g., power interruption, software crash, or other reset) the
+       * receiver shall behave as if the fail-safe timer expired and perform the sequence of clean-up steps
+       * listed below.
+       *
+       * On successful execution of the command, the ErrorCode field of the ArmFailSafeResponse shall be set to
+       * OK.
+       *
+       * ### Fail Safe Context
+       *
+       * When first arming the fail-safe timer, a 'Fail Safe Context' shall be created on the receiver, to track
+       * the following state information while the fail-safe is armed:
+       *
+       *   • The fail-safe timer duration.
+       *
+       *   • The state of all Network Commissioning Networks attribute configurations, to allow recovery of
+       *     connectivity after Fail-Safe expiry.
+       *
+       *   • Whether an AddNOC command or UpdateNOC command has taken place.
+       *
+       *   • A Fabric Index for the fabric-scoping of the context, starting at the accessing fabric index for the
+       *     ArmFailSafe command, and updated with the Fabric Index associated with an AddNOC command or an
+       *     UpdateNOC command being invoked successfully during the ongoing Fail-Safe timer period.
+       *
+       *   • The operational credentials associated with any Fabric whose configuration is affected by the
+       *     UpdateNOC command.
+       *
+       *   • Optionally: the previous state of non-fabric-scoped data that is mutated during the fail-safe period.
+       *
+       * Note the following to assist in understanding the above state-keeping, which summarizes other normative
+       * requirements in the respective sections:
+       *
+       *   • The AddNOC command can only be invoked once per contiguous non-expiring fail-safe timer period, and
+       *     only if no UpdateNOC command was previously processed within the same fail-safe timer period.
+       *
+       *   • The UpdateNOC command can only be invoked once per contiguous non-expiring fail-safe timer period,
+       *     can only be invoked over a CASE session, and only if no AddNOC command was previously processed in
+       *     the same fail-safe timer period.
+       *
+       * On creation of the Fail Safe Context a second timer shall be created to expire at
+       * MaxCumulativeFailsafeSeconds as specified in BasicCommissioningInfo. This Cumulative Fail Safe Context
+       * timer (CFSC timer) serves to limit the lifetime of any particular Fail Safe Context; it shall NOT be
+       * extended or modified on subsequent invocations of ArmFailSafe associated with this Fail Safe Context.
+       * Upon expiry of the CFSC timer, the receiver shall execute cleanup behavior equivalent to that of
+       * fail-safe timer expiration as detailed in Section 11.10.6.2.2, “Behavior on expiry of Fail-Safe timer”.
+       * Termination of the session prior to the expiration of that timer for any reason (including a successful
+       * end of commissioning or an expiry of a fail-safe timer) shall also delete the CFSC timer.
+       *
+       * ### Behavior on expiry of Fail-Safe timer
+       *
+       * If the fail-safe timer expires before the CommissioningComplete command is successfully invoked, the
+       * following sequence of clean-up steps shall be executed, in order, by the receiver:
+       *
+       *   1. Terminate any open PASE secure session by clearing any associated Secure Session Context at the
+       *       Server.
+       *
+       *   2. Revoke the temporary administrative privileges granted to any open PASE session (see Section
+       *       6.6.2.8, “Bootstrapping of the Access Control Cluster”) at the Server.
+       *
+       *   3. If an AddNOC or UpdateNOC command has been successfully invoked, terminate all CASE sessions
+       *       associated with the Fabric whose Fabric Index is recorded in the Fail-Safe context (see Section
+       *       11.10.6.2, “ArmFailSafe Command”) by clearing any associated Secure Session Context at the Server.
+       *
+       *   4. Reset the configuration of all Network Commissioning Networks attribute to their state prior to the
+       *       Fail-Safe being armed.
+       *
+       *   5. If an UpdateNOC command had been successfully invoked, revert the state of operational key pair,
+       *       NOC and ICAC for that Fabric to the state prior to the Fail-Safe timer being armed, for the Fabric
+       *       Index that was the subject of the UpdateNOC command.
+       *
+       *   6. If an AddNOC command had been successfully invoked, achieve the equivalent effect of invoking the
+       *       RemoveFabric command against the Fabric Index stored in the Fail-Safe Context for the Fabric Index
+       *       that was the subject of the AddNOC command. This shall remove all associations to that Fabric
+       *       including all fabric-scoped data, and may possibly factory-reset the device depending on current
+       *       device state. This shall only apply to Fabrics added during the fail-safe period as the result of
+       *       the AddNOC command.
+       *
+       *   7. If the CSRRequest command had been successfully invoked, but no AddNOC or UpdateNOC command had
+       *       been successfully invoked, then the new operational key pair temporarily generated for the
+       *       purposes of NOC addition or update (see Node Operational CSR Procedure) shall be removed as it is
+       *       no longer needed.
+       *
+       *   8. Remove any RCACs added by the AddTrustedRootCertificate command that are not currently referenced
+       *       by any entry in the Fabrics attribute.
+       *
+       *   9. Reset the Breadcrumb attribute to zero.
+       *
+       *   10. Optionally: if no factory-reset resulted from the previous steps, it is recommended that the
+       *
+       * Node rollback the state of all non fabric-scoped data present in the Fail-Safe context.
+       *
+       * @see {@link MatterSpecification.v13.Core} § 11.10.6.2
+       */
+      armFailSafe: Command(
+        0,
+        GeneralCommissioning2.TlvArmFailSafeRequest,
+        1,
+        GeneralCommissioning2.TlvArmFailSafeResponse,
+        { invokeAcl: AccessLevel.Administer }
+      ),
+      /**
+       * This shall add or update the regulatory configuration in the RegulatoryConfig Attribute to the value
+       * provided in the NewRegulatoryConfig field.
+       *
+       * Success or failure of this command shall be communicated by the SetRegulatoryConfigResponse command,
+       * unless some data model validations caused a failure status code to be issued during the processing of
+       * the command.
+       *
+       * The CountryCode field shall conforms to ISO 3166-1 alpha-2 and shall be used to set the Location
+       * attribute reflected by the Basic Information Cluster.
+       *
+       * If the server limits some of the values (e.g. locked to a particular country, with no regulatory data
+       * for others), then setting regulatory information outside a valid country or location shall still set the
+       * Location attribute reflected by the Basic Information Cluster configuration, but the
+       * SetRegulatoryConfigResponse replied shall have the ErrorCode field set to ValueOutsideRange error.
+       *
+       * If the LocationCapability attribute is not Indoor/Outdoor and the NewRegulatoryConfig value received
+       * does not match either the Indoor or Outdoor fixed value in LocationCapability, then the
+       * SetRegulatoryConfigResponse replied shall have the ErrorCode field set to ValueOutsideRange error and
+       * the RegulatoryConfig attribute and associated internal radio configuration shall remain unchanged.
+       *
+       * If the LocationCapability attribute is set to Indoor/Outdoor, then the RegulatoryConfig attribute shall
+       * be set to match the NewRegulatoryConfig field.
+       *
+       * On successful execution of the command, the ErrorCode field of the SetRegulatoryConfigResponse shall be
+       * set to OK.
+       *
+       * The Breadcrumb field shall be used to atomically set the Breadcrumb attribute on success of this
+       * command, when SetRegulatoryConfigResponse has the ErrorCode field set to OK. If the command fails, the
+       * Breadcrumb attribute shall be left unchanged.
+       *
+       * @see {@link MatterSpecification.v13.Core} § 11.10.6.4
+       */
+      setRegulatoryConfig: Command(
+        2,
+        GeneralCommissioning2.TlvSetRegulatoryConfigRequest,
+        3,
+        GeneralCommissioning2.TlvSetRegulatoryConfigResponse,
+        { invokeAcl: AccessLevel.Administer }
+      ),
+      /**
+       * This command has no data.
+       *
+       * Success or failure of this command shall be communicated by the CommissioningCompleteResponse command,
+       * unless some data model validations caused a failure status code to be issued during the processing of
+       * the command.
+       *
+       * This command signals the Server that the Commissioner or Administrator has successfully completed all
+       * steps needed during the Fail-Safe period, such as commissioning (see Section 5.5, “Commissioning Flows”)
+       * or other Administrator operations requiring usage of the Fail Safe timer. It ensures that the Server is
+       * configured in a state such that it still has all necessary elements to be fully operable within a
+       * Fabric, such as ACL entries (see Access Control Cluster) and operational credentials (see Section 6.4,
+       * “Node Operational Credentials Specification”), and that the Node is reach
+       *
+       * able using CASE (see Section 4.14.2, “Certificate Authenticated Session Establishment (CASE)”) over an
+       * operational network.
+       *
+       * An ErrorCode of NoFailSafe shall be responded to the invoker if the CommissioningComplete command was
+       * received when no Fail-Safe context exists.
+       *
+       * This command is fabric-scoped, so cannot be issued over a session that does not have an associated
+       * fabric, i.e. over PASE session prior to an AddNOC command. In addition, this command is only permitted
+       * over CASE and must be issued by a node associated with the ongoing Fail-Safe context. An ErrorCode of
+       * InvalidAuthentication shall be responded to the invoker if the CommissioningComplete command was
+       * received outside a CASE session (e.g., over Group messaging, or PASE session after AddNOC), or if the
+       * accessing fabric is not the one associated with the ongoing Fail-Safe context.
+       *
+       * This command shall only result in success with an ErrorCode value of OK in the
+       * CommissioningCompleteResponse if received over a CASE session and the accessing fabric index matches the
+       * Fabric Index associated with the current Fail-Safe context. In other words:
+       *
+       *   • If no AddNOC command had been successfully invoked, the CommissioningComplete command must originate
+       *     from the Fabric that initiated the Fail-Safe context.
+       *
+       *   • After an AddNOC command has been successfully invoked, the CommissioningComplete command must
+       *     originate from the Fabric which was joined through the execution of that command, which updated the
+       *     Fail-Safe context’s Fabric Index.
+       *
+       * On successful execution of the CommissioningComplete command, where the CommissioningCompleteResponse
+       * has an ErrorCode of OK, the following actions shall be undertaken on the Server:
+       *
+       *   1. The Fail-Safe timer associated with the current Fail-Safe context shall be disarmed.
+       *
+       *   2. The commissioning window at the Server shall be closed.
+       *
+       *   3. Any temporary administrative privileges automatically granted to any open PASE session shall be
+       *      revoked (see Section 6.6.2.8, “Bootstrapping of the Access Control Cluster”).
+       *
+       *   4. The Secure Session Context of any PASE session still established at the Server shall be cleared.
+       *
+       *   5. The Breadcrumb attribute shall be reset to zero.
+       *
+       * After receipt of a CommissioningCompleteResponse with an ErrorCode value of OK, a client cannot expect
+       * any previously established PASE session to still be usable, due to the server having cleared such
+       * sessions.
+       *
+       * @see {@link MatterSpecification.v13.Core} § 11.10.6.6
+       */
+      commissioningComplete: Command(
+        4,
+        TlvNoArguments,
+        5,
+        GeneralCommissioning2.TlvCommissioningCompleteResponse,
+        { invokeAcl: AccessLevel.Administer }
+      )
+    }
+  });
+  GeneralCommissioning2.Cluster = GeneralCommissioning2.ClusterInstance;
+  GeneralCommissioning2.Complete = GeneralCommissioning2.Cluster;
+})(GeneralCommissioning || (GeneralCommissioning = {}));
+const GeneralCommissioningCluster = GeneralCommissioning.Cluster;
+ClusterRegistry.register(GeneralCommissioning.Complete);
+export {
+  GeneralCommissioning,
+  GeneralCommissioningCluster
+};
+//# sourceMappingURL=general-commissioning.js.map

package/dist/esm/clusters/general-commissioning.js.map

@@ -0,0 +1,6 @@
+{
+  "version": 3,
+  "sources": ["../../../src/clusters/general-commissioning.ts"],
+  "mappings": "AAAA;AAAA;AAAA;AAAA;AAAA;AAQA,SAAS,sBAAsB;AAC/B,SAAS,mBAAmB,gBAAgB,WAAW,eAAe;AACtE,SAAS,WAAW,WAAW,eAAe;AAC9C,SAAS,mBAAmB;AAC5B,SAAS,UAAU,iBAAiB;AAEpC,SAAS,kBAAkB;AAC3B,SAAS,iBAAiB;AAC1B,SAAS,sBAAsB;AAE/B,SAAS,uBAAuB;AAEzB,IAAU;AAAA,CAAV,CAAUA,0BAAV;AAMI,EAAMA,sBAAA,4BAA4B,UAAU;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,IAS/C,6BAA6B,SAAS,GAAG,SAAS;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,IAYlD,8BAA8B,SAAS,GAAG,SAAS;AAAA,EACvD,CAAC;AAeM,MAAK;AAAL,IAAKC,4BAAL;AAIH,IAAAA,gDAAA,YAAS,KAAT;AAKA,IAAAA,gDAAA,aAAU,KAAV;AAKA,IAAAA,gDAAA,mBAAgB,KAAhB;AAAA,KAdQ,yBAAAD,sBAAA,2BAAAA,sBAAA;AAsBL,EAAMA,sBAAA,wBAAwB,UAAU;AAAA,IAC3C,qBAAqB,SAAS,GAAG,SAAS;AAAA,IAC1C,YAAY,SAAS,GAAG,SAAS;AAAA,EACrC,CAAC;AAcM,MAAK;AAAL,IAAKE,wBAAL;AAIH,IAAAA,wCAAA,QAAK,KAAL;AAMA,IAAAA,wCAAA,uBAAoB,KAApB;AAKA,IAAAA,wCAAA,2BAAwB,KAAxB;AAKA,IAAAA,wCAAA,gBAAa,KAAb;AAMA,IAAAA,wCAAA,wBAAqB,KAArB;AAAA,KA1BQ,qBAAAF,sBAAA,uBAAAA,sBAAA;AAgCL,EAAMA,sBAAA,yBAAyB,UAAU;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,IAO5C,WAAW,SAAS,GAAG,QAA4B,CAAC;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,IAOpD,WAAW,SAAS,GAAG,UAAU,MAAM,EAAE,WAAW,IAAI,CAAC,CAAC;AAAA,EAC9D,CAAC;AAYM,EAAMA,sBAAA,gCAAgC,UAAU;AAAA,IACnD,qBAAqB,SAAS,GAAG,QAAgC,CAAC;AAAA,IAClE,aAAa,SAAS,GAAG,UAAU,MAAM,EAAE,QAAQ,EAAE,CAAC,CAAC;AAAA,IACvD,YAAY,SAAS,GAAG,SAAS;AAAA,EACrC,CAAC;AAYM,EAAMA,sBAAA,iCAAiC,UAAU;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,IAOpD,WAAW,SAAS,GAAG,QAA4B,CAAC;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,IAOpD,WAAW,SAAS,GAAG,SAAS;AAAA,EACpC,CAAC;AAUM,EAAMA,sBAAA,mCAAmC,UAAU;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,IAOtD,WAAW,SAAS,GAAG,QAA4B,CAAC;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,IAOpD,WAAW,SAAS,GAAG,SAAS;AAAA,EACpC,CAAC;AAUM,EAAMA,sBAAA,kBAAkB,eAAe;AAAA,IAC1C,IAAI;AAAA,IACJ,MAAM;AAAA,IACN,UAAU;AAAA,IAEV,YAAY;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,MAmBR,YAAY,kBAAkB,GAAK,WAAW,EAAE,SAAS,GAAG,UAAU,YAAY,WAAW,CAAC;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,MAQ9F,wBAAwB,eAAe,GAAKA,sBAAA,yBAAyB;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,MAUrE,kBAAkB,UAAU,GAAK,QAAgC,CAAC;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,MAkBlE,oBAAoB;AAAA,QAChB;AAAA,QACA,QAAgC;AAAA,QAChC,EAAE,SAAS,sBAAqC;AAAA,MACpD;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,MAQA,8BAA8B,eAAe,GAAK,YAAY,EAAE,SAAS,KAAK,CAAC;AAAA,IACnF;AAAA,IAEA,UAAU;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,MAgIN,aAAa;AAAA,QACT;AAAA,QACAA,sBAAA;AAAA,QACA;AAAA,QACAA,sBAAA;AAAA,QACA,EAAE,WAAW,YAAY,WAAW;AAAA,MACxC;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,MAmCA,qBAAqB;AAAA,QACjB;AAAA,QACAA,sBAAA;AAAA,QACA;AAAA,QACAA,sBAAA;AAAA,QACA,EAAE,WAAW,YAAY,WAAW;AAAA,MACxC;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA;AAAA,MA4DA,uBAAuB;AAAA,QACnB;AAAA,QACA;AAAA,QACA;AAAA,QACAA,sBAAA;AAAA,QACA,EAAE,WAAW,YAAY,WAAW;AAAA,MACxC;AAAA,IACJ;AAAA,EACJ,CAAC;AAaM,EAAMA,sBAAA,UAAmBA,sBAAA;AACzB,EAAMA,sBAAA,WAAWA,sBAAA;AAAA,GA3hBX;AA+hBV,MAAM,8BAA8B,qBAAqB;AAChE,gBAAgB,SAAS,qBAAqB,QAAQ;",
+  "names": ["GeneralCommissioning", "RegulatoryLocationType", "CommissioningError"]
+}