@kitware/vtk.js 30.6.0 → 30.6.2

package/Filters/Sources/CylinderSource.d.ts

@@ -5,170 +5,171 @@ import { Vector3 } from './../../types';
  *
  */
 export interface ICylinderSourceInitialValues {
-	height?: number;
-	initAngle?: number;
-	otherRadius?: number;
-	radius?: number;
-	resolution?: number;
-	center?: Vector3;
-	direction?: Vector3;
-	capping?: boolean;
-	pointType?: string;
+  height?: number;
+  initAngle?: number;
+  otherRadius?: number;
+  radius?: number;
+  resolution?: number;
+  center?: Vector3;
+  direction?: Vector3;
+  capping?: boolean;
+  pointType?: string;
 }
 
-type vtkCylinderSourceBase = vtkObject & Omit<vtkAlgorithm,
-	| 'getInputData'
-	| 'setInputData'
-	| 'setInputConnection'
-	| 'getInputConnection'
-	| 'addInputConnection'
-	| 'addInputData'>;
+type vtkCylinderSourceBase = vtkObject &
+  Omit<
+    vtkAlgorithm,
+    | 'getInputData'
+    | 'setInputData'
+    | 'setInputConnection'
+    | 'getInputConnection'
+    | 'addInputConnection'
+    | 'addInputData'
+  >;
 
 export interface vtkCylinderSource extends vtkCylinderSourceBase {
-
-	/**
-	 * Get the cap the base of the cylinder with a polygon.
-	 * @default true
-	 */
-	getCapping(): boolean;
-
-	/**
-	 * Get the center of the cylinder.
-	 * @default [0, 0, 0]
-	 */
-	getCenter(): Vector3;
-
-	/**
-	 * Get the center of the cylinder.
-	 */
-	getCenterByReference(): Vector3;
-
-	/**
-	 * Get the orientation vector of the cylinder.
-	 * @default [1.0, 0.0, 0.0]
-	 */
-	getDirection(): Vector3;
-
-	/**
-	 * Get the orientation vector of the cylinder.
-	 */
-	getDirectionByReference(): Vector3;
-
-	/**
-	 * Get the height of the cylinder.
-	 * @default 1.0
-	 */
-	getHeight(): number;
-
-	/**
-	 * Get the initial angle along direction
-	 * @default 0
-	 * @see getDirection
-	 */
-	getInitAngle(): number;
-
-	/**
-	 * Get the radius on Z axis. If not null and different from radius,
-	 * the cylinder base becomes an ellipse instead of a circle.
-	 * @default null
-	 * @see getRadius()
-	 */
-	getOtherRadius(): number;
-
-	/**
-	 * Get the base radius of the cylinder.
-	 * @default 0.5
-	 * @see getOtherRadius()
-	 */
-	getRadius(): number;
-
-	/**
-	 * Get the number of facets used to represent the cylinder.
-	 * @default 6
-	 */
-	getResolution(): number;
-
-	/**
-	 *
-	 * @param inData
-	 * @param outData
-	 */
-	requestData(inData: any, outData: any): void;
-
-	/**
-	 * Turn on/off whether to cap the base of the cone with a polygon.
-	 * @param {Boolean} capping The capping value. 
-	 */
-	setCapping(capping: boolean): boolean;
-
-	/**
-	 * Set the center of the cylinder.
-	 * @param {Number} x The x coordinate.
-	 * @param {Number} y The y coordinate.
-	 * @param {Number} z The z coordinate.
-	 * @default [0, 0, 0]
-	 */
-	setCenter(x: number, y: number, z: number): boolean;
-
-	/**
-	 * Set the center of the cylinder.
-	 * @param {Vector3} center The center point's coordinates.
-	 * @default [0, 0, 0]
-	 */
-	setCenterFrom(center: Vector3): boolean;
-
-	/**
-	 * Set the direction for the cylinder.
-	 * @param {Number} x The x coordinate.
-	 * @param {Number} y The y coordinate.
-	 * @param {Number} z The z coordinate.
-	 */
-	setDirection(x: number, y: number, z: number): boolean;
-
-	/**
-	 * Set the direction for the cylinder.
-	 * @param {Vector3} direction The direction coordinates.
-	 */
-	setDirection(direction: Vector3): boolean;
-
-	/**
-	 * Set the direction for the cylinder.
-	 * @param {Vector3} direction The direction coordinates.
-	 */
-	setDirectionFrom(direction: Vector3): boolean;
-
-	/**
-	 * Set the height of the cylinder.
-	 * @param {Number} height The height along the cylinder in its specified direction.
-	 */
-	setHeight(height: number): boolean;
-
-	/**
-	 * Set the initial angle along direction.
-	 * @param {Number} initAngle The initial angle in radian.
-	 */
-	setInitAngle(initAngle: number): boolean;
-
-	/**
-	 * Set the base Z radius of the cylinder.
-	 * @param {Number} radius The radius of the cylinder in Z.
-	 * @see setRadius()
-	 */
-	setOtherRadius(radius: number): boolean;
-
-	/**
-	 * Set the base radius of the cylinder.
-	 * @param {Number} radius The radius of the cylinder.
-	 * @see setOtherRadius()
-	 */
-	setRadius(radius: number): boolean;
-
-	/**
-	 * Set the number of facets used to represent the cylinder.
-	 * @param {Number} resolution The number of facets used to represent the cylinder.
-	 */
-	setResolution(resolution: number): boolean;
-
+  /**
+   * Get the cap the base of the cylinder with a polygon.
+   * @default true
+   */
+  getCapping(): boolean;
+
+  /**
+   * Get the center of the cylinder.
+   * @default [0, 0, 0]
+   */
+  getCenter(): Vector3;
+
+  /**
+   * Get the center of the cylinder.
+   */
+  getCenterByReference(): Vector3;
+
+  /**
+   * Get the orientation vector of the cylinder.
+   * @default [1.0, 0.0, 0.0]
+   */
+  getDirection(): Vector3;
+
+  /**
+   * Get the orientation vector of the cylinder.
+   */
+  getDirectionByReference(): Vector3;
+
+  /**
+   * Get the height of the cylinder.
+   * @default 1.0
+   */
+  getHeight(): number;
+
+  /**
+   * Get the initial angle along direction
+   * @default 0
+   * @see getDirection
+   */
+  getInitAngle(): number;
+
+  /**
+   * Get the radius on Z axis. If not null and different from radius,
+   * the cylinder base becomes an ellipse instead of a circle.
+   * @default null
+   * @see getRadius()
+   */
+  getOtherRadius(): number;
+
+  /**
+   * Get the base radius of the cylinder.
+   * @default 0.5
+   * @see getOtherRadius()
+   */
+  getRadius(): number;
+
+  /**
+   * Get the number of facets used to represent the cylinder.
+   * @default 6
+   */
+  getResolution(): number;
+
+  /**
+   *
+   * @param inData
+   * @param outData
+   */
+  requestData(inData: any, outData: any): void;
+
+  /**
+   * Turn on/off whether to cap the base of the cone with a polygon.
+   * @param {Boolean} capping The capping value.
+   */
+  setCapping(capping: boolean): boolean;
+
+  /**
+   * Set the center of the cylinder.
+   * @param {Number} x The x coordinate.
+   * @param {Number} y The y coordinate.
+   * @param {Number} z The z coordinate.
+   * @default [0, 0, 0]
+   */
+  setCenter(x: number, y: number, z: number): boolean;
+
+  /**
+   * Set the center of the cylinder.
+   * @param {Vector3} center The center point's coordinates.
+   * @default [0, 0, 0]
+   */
+  setCenterFrom(center: Vector3): boolean;
+
+  /**
+   * Set the direction for the cylinder.
+   * @param {Number} x The x coordinate.
+   * @param {Number} y The y coordinate.
+   * @param {Number} z The z coordinate.
+   */
+  setDirection(x: number, y: number, z: number): boolean;
+
+  /**
+   * Set the direction for the cylinder.
+   * @param {Vector3} direction The direction coordinates.
+   */
+  setDirection(direction: Vector3): boolean;
+
+  /**
+   * Set the direction for the cylinder.
+   * @param {Vector3} direction The direction coordinates.
+   */
+  setDirectionFrom(direction: Vector3): boolean;
+
+  /**
+   * Set the height of the cylinder.
+   * @param {Number} height The height along the cylinder in its specified direction.
+   */
+  setHeight(height: number): boolean;
+
+  /**
+   * Set the initial angle along direction.
+   * @param {Number} initAngle The initial angle in radian.
+   */
+  setInitAngle(initAngle: number): boolean;
+
+  /**
+   * Set the base Z radius of the cylinder.
+   * @param {Number} radius The radius of the cylinder in Z.
+   * @see setRadius()
+   */
+  setOtherRadius(radius: number): boolean;
+
+  /**
+   * Set the base radius of the cylinder.
+   * @param {Number} radius The radius of the cylinder.
+   * @see setOtherRadius()
+   */
+  setRadius(radius: number): boolean;
+
+  /**
+   * Set the number of facets used to represent the cylinder.
+   * @param {Number} resolution The number of facets used to represent the cylinder.
+   */
+  setResolution(resolution: number): boolean;
 }
 
 /**
@@ -178,13 +179,19 @@ export interface vtkCylinderSource extends vtkCylinderSourceBase {
  * @param model object on which data structure will be bounds (protected)
  * @param {ICylinderSourceInitialValues} [initialValues] (default: {})
  */
-export function extend(publicAPI: object, model: object, initialValues?: ICylinderSourceInitialValues): void;
+export function extend(
+  publicAPI: object,
+  model: object,
+  initialValues?: ICylinderSourceInitialValues
+): void;
 
 /**
  * Method used to create a new instance of vtkCylinderSource.
  * @param {ICylinderSourceInitialValues} [initialValues] for pre-setting some of its content
  */
-export function newInstance(initialValues?: ICylinderSourceInitialValues): vtkCylinderSource;
+export function newInstance(
+  initialValues?: ICylinderSourceInitialValues
+): vtkCylinderSource;
 
 /**
  * vtkCylinderSource creates a polygonal cylinder centered at Center;
@@ -192,17 +199,17 @@ export function newInstance(initialValues?: ICylinderSourceInitialValues): vtkCy
  * The height and radius of the cylinder can be specified, as well as the number of sides.
  * It is also possible to control whether the cylinder is open-ended or capped.
  * If you have the end points of the cylinder, you should use a vtkLineSource followed by a vtkTubeFilter instead of the vtkCylinderSource.
- * 
+ *
  * @example
  * ```js
  * import vtkCylinderSource from '@kitware/vtk.js/Filters/Sources/CylinderSource';
- * 
+ *
  * const cylinder = vtkCylinderSource.newInstance({ height: 2, radius: 1, resolution: 80 });
  * const polydata = cylinder.getOutputData();
  * ```
  */
 export declare const vtkCylinderSource: {
-	newInstance: typeof newInstance,
-	extend: typeof extend,
+  newInstance: typeof newInstance;
+  extend: typeof extend;
 };
 export default vtkCylinderSource;

package/Filters/Sources/LineSource.d.ts

@@ -5,96 +5,98 @@ import { Vector3 } from './../../types';
  *
  */
 export interface ILineSourceInitialValues {
-	resolution?: number;
-	point1?: Vector3;
-	point2?: Vector3;
-	pointType?: string;
+  resolution?: number;
+  point1?: Vector3;
+  point2?: Vector3;
+  pointType?: string;
 }
 
-type vtkLineSourceBase = vtkObject & Omit<vtkAlgorithm,
-	| 'getInputData'
-	| 'setInputData'
-	| 'setInputConnection'
-	| 'getInputConnection'
-	| 'addInputConnection'
-	| 'addInputData'>;
+type vtkLineSourceBase = vtkObject &
+  Omit<
+    vtkAlgorithm,
+    | 'getInputData'
+    | 'setInputData'
+    | 'setInputConnection'
+    | 'getInputConnection'
+    | 'addInputConnection'
+    | 'addInputData'
+  >;
 
 export interface vtkLineSource extends vtkLineSourceBase {
-
-	/**
-	 * Get the starting point of the line.
-	 * @default [-1, 0, 0]
-	 */
-	getPoint1(): Vector3;
-
-	/**
-	 * Get the starting point of the line.
-	 */
-	getPoint1ByReference(): Vector3;
-
-	/**
-	 * Get the ending point of the line.
-	 * @default [1, 0, 0]
-	 */
-	getPoint2(): Vector3;
-
-	/**
-	 * Get the ending point of the line.
-	 */
-	getPoint2ByReference(): Vector3;
-
-	/**
-	 * Get the resolution of the line.
-	 * @default 6
-	 */
-	getResolution(): number;
-
-	/**
-	 * 
-	 * @param inData
-	 * @param outData
-	 */
-	requestData(inData: any, outData: any): void;
-
-	/**
-	 * Set the starting point of the line.
-	 * @param {Number} x The x coordinate.
-	 * @param {Number} y The y coordinate.
-	 * @param {Number} z The z coordinate.
-	 */
-	setPoint1(x: number, y: number, z: number): boolean;
-
-	/**
-	 * Set the starting point of the line.
-	 * @param {Vector3} point1 The starting point's coordinates.
-	 */
-	setPoint1(point1: Vector3): boolean;
-
-	/**
-	 * Set the starting point of the line.
-	 * @param {Vector3} point1 The starting point's coordinates.
-	 */
-	setPoint1From(point1: Vector3): boolean;
-
-	/**
-	 * Set the ending point of the line.
-	 * @param {Number} x The x coordinate.
-	 * @param {Number} y The y coordinate.
-	 * @param {Number} z The z coordinate.
-	 */
-	setPoint2(x: number, y: number, z: number): boolean;
-
-	/**
-	 * Set the ending point of the line.
-	 * @param {Vector3} point2 The ending point's coordinates.
-	 */
-	setPoint2From(point2: Vector3): boolean;
-
-	/**
-	 * Set the number of segments used to represent the line.
-	 * @param {Number} resolution The number of segments.
-	 */
-	setResolution(resolution: number): boolean;
+  /**
+   * Get the starting point of the line.
+   * @default [-1, 0, 0]
+   */
+  getPoint1(): Vector3;
+
+  /**
+   * Get the starting point of the line.
+   */
+  getPoint1ByReference(): Vector3;
+
+  /**
+   * Get the ending point of the line.
+   * @default [1, 0, 0]
+   */
+  getPoint2(): Vector3;
+
+  /**
+   * Get the ending point of the line.
+   */
+  getPoint2ByReference(): Vector3;
+
+  /**
+   * Get the resolution of the line.
+   * @default 6
+   */
+  getResolution(): number;
+
+  /**
+   *
+   * @param inData
+   * @param outData
+   */
+  requestData(inData: any, outData: any): void;
+
+  /**
+   * Set the starting point of the line.
+   * @param {Number} x The x coordinate.
+   * @param {Number} y The y coordinate.
+   * @param {Number} z The z coordinate.
+   */
+  setPoint1(x: number, y: number, z: number): boolean;
+
+  /**
+   * Set the starting point of the line.
+   * @param {Vector3} point1 The starting point's coordinates.
+   */
+  setPoint1(point1: Vector3): boolean;
+
+  /**
+   * Set the starting point of the line.
+   * @param {Vector3} point1 The starting point's coordinates.
+   */
+  setPoint1From(point1: Vector3): boolean;
+
+  /**
+   * Set the ending point of the line.
+   * @param {Number} x The x coordinate.
+   * @param {Number} y The y coordinate.
+   * @param {Number} z The z coordinate.
+   */
+  setPoint2(x: number, y: number, z: number): boolean;
+
+  /**
+   * Set the ending point of the line.
+   * @param {Vector3} point2 The ending point's coordinates.
+   */
+  setPoint2From(point2: Vector3): boolean;
+
+  /**
+   * Set the number of segments used to represent the line.
+   * @param {Number} resolution The number of segments.
+   */
+  setResolution(resolution: number): boolean;
 }
 
 /**
@@ -104,29 +106,35 @@ export interface vtkLineSource extends vtkLineSourceBase {
  * @param model object on which data structure will be bounds (protected)
  * @param {ILineSourceInitialValues} [initialValues] (default: {})
  */
-export function extend(publicAPI: object, model: object, initialValues?: ILineSourceInitialValues): void;
+export function extend(
+  publicAPI: object,
+  model: object,
+  initialValues?: ILineSourceInitialValues
+): void;
 
 /**
  * Method used to create a new instance of vtkLineSource.
  * @param {ILineSourceInitialValues} [initialValues] for pre-setting some of its content
  */
-export function newInstance(initialValues?: ILineSourceInitialValues): vtkLineSource;
+export function newInstance(
+  initialValues?: ILineSourceInitialValues
+): vtkLineSource;
 
 /**
  * vtkLineSource creates a line segment from point1 to point2;
  * The resolution can be specified, which determines the number of points along the line.
  * Following a vtkLineSource by a vtkTubeFilter is a convenient way to create a cylinder based on endpoints.
- * 
+ *
  * @example
  * ```js
  * import vtkLineSource from '@kitware/vtk.js/Filters/Sources/LineSource';
- * 
+ *
  * const line = vtkLineSource.newInstance({ resolution: 10 });
  * const polydata = line.getOutputData();
  * ```
  */
 export declare const vtkLineSource: {
-	newInstance: typeof newInstance,
-	extend: typeof extend,
+  newInstance: typeof newInstance;
+  extend: typeof extend;
 };
 export default vtkLineSource;