@cregis-dev/cckit 0.4.1 → 0.6.1

package/templates/bmad/bmm/workflows/4-implementation/dev-story/instructions.xml

@@ -1,410 +0,0 @@
-<workflow>
-  <critical>The workflow execution engine is governed by: {project-root}/_bmad/core/tasks/workflow.xml</critical>
-  <critical>You MUST have already loaded and processed: {installed_path}/workflow.yaml</critical>
-  <critical>Communicate all responses in {communication_language} and language MUST be tailored to {user_skill_level}</critical>
-  <critical>Generate all documents in {document_output_language}</critical>
-  <critical>Only modify the story file in these areas: Tasks/Subtasks checkboxes, Dev Agent Record (Debug Log, Completion Notes), File List,
-    Change Log, and Status</critical>
-  <critical>Execute ALL steps in exact order; do NOT skip steps</critical>
-  <critical>Absolutely DO NOT stop because of "milestones", "significant progress", or "session boundaries". Continue in a single execution
-    until the story is COMPLETE (all ACs satisfied and all tasks/subtasks checked) UNLESS a HALT condition is triggered or the USER gives
-    other instruction.</critical>
-  <critical>Do NOT schedule a "next session" or request review pauses unless a HALT condition applies. Only Step 6 decides completion.</critical>
-  <critical>User skill level ({user_skill_level}) affects conversation style ONLY, not code updates.</critical>
-
-  <step n="1" goal="Find next ready story and load it" tag="sprint-status">
-    <check if="{{story_path}} is provided">
-      <action>Use {{story_path}} directly</action>
-      <action>Read COMPLETE story file</action>
-      <action>Extract story_key from filename or metadata</action>
-      <goto anchor="task_check" />
-    </check>
-
-    <!-- Sprint-based story discovery -->
-    <check if="{{sprint_status}} file exists">
-      <critical>MUST read COMPLETE sprint-status.yaml file from start to end to preserve order</critical>
-      <action>Load the FULL file: {{sprint_status}}</action>
-      <action>Read ALL lines from beginning to end - do not skip any content</action>
-      <action>Parse the development_status section completely to understand story order</action>
-
-      <action>Find the FIRST story (by reading in order from top to bottom) where:
-        - Key matches pattern: number-number-name (e.g., "1-2-user-auth")
-        - NOT an epic key (epic-X) or retrospective (epic-X-retrospective)
-        - Status value equals "ready-for-dev"
-      </action>
-
-      <check if="no ready-for-dev or in-progress story found">
-        <output>📋 No ready-for-dev stories found in sprint-status.yaml
-
-          **Current Sprint Status:** {{sprint_status_summary}}
-
-          **What would you like to do?**
-          1. Run `create-story` to create next story from epics with comprehensive context
-          2. Run `*validate-create-story` to improve existing stories before development (recommended quality check)
-          3. Specify a particular story file to develop (provide full path)
-          4. Check {{sprint_status}} file to see current sprint status
-
-          💡 **Tip:** Stories in `ready-for-dev` may not have been validated. Consider running `validate-create-story` first for a quality
-          check.
-        </output>
-        <ask>Choose option [1], [2], [3], or [4], or specify story file path:</ask>
-
-        <check if="user chooses '1'">
-          <action>HALT - Run create-story to create next story</action>
-        </check>
-
-        <check if="user chooses '2'">
-          <action>HALT - Run validate-create-story to improve existing stories</action>
-        </check>
-
-        <check if="user chooses '3'">
-          <ask>Provide the story file path to develop:</ask>
-          <action>Store user-provided story path as {{story_path}}</action>
-          <goto anchor="task_check" />
-        </check>
-
-        <check if="user chooses '4'">
-          <output>Loading {{sprint_status}} for detailed status review...</output>
-          <action>Display detailed sprint status analysis</action>
-          <action>HALT - User can review sprint status and provide story path</action>
-        </check>
-
-        <check if="user provides story file path">
-          <action>Store user-provided story path as {{story_path}}</action>
-          <goto anchor="task_check" />
-        </check>
-      </check>
-    </check>
-
-    <!-- Non-sprint story discovery -->
-    <check if="{{sprint_status}} file does NOT exist">
-      <action>Search {implementation_artifacts} for stories directly</action>
-      <action>Find stories with "ready-for-dev" status in files</action>
-      <action>Look for story files matching pattern: *-*-*.md</action>
-      <action>Read each candidate story file to check Status section</action>
-
-      <check if="no ready-for-dev stories found in story files">
-        <output>📋 No ready-for-dev stories found
-
-          **Available Options:**
-          1. Run `create-story` to create next story from epics with comprehensive context
-          2. Run `*validate-create-story` to improve existing stories
-          3. Specify which story to develop
-        </output>
-        <ask>What would you like to do? Choose option [1], [2], or [3]:</ask>
-
-        <check if="user chooses '1'">
-          <action>HALT - Run create-story to create next story</action>
-        </check>
-
-        <check if="user chooses '2'">
-          <action>HALT - Run validate-create-story to improve existing stories</action>
-        </check>
-
-        <check if="user chooses '3'">
-          <ask>It's unclear what story you want developed. Please provide the full path to the story file:</ask>
-          <action>Store user-provided story path as {{story_path}}</action>
-          <action>Continue with provided story file</action>
-        </check>
-      </check>
-
-      <check if="ready-for-dev story found in files">
-        <action>Use discovered story file and extract story_key</action>
-      </check>
-    </check>
-
-    <action>Store the found story_key (e.g., "1-2-user-authentication") for later status updates</action>
-    <action>Find matching story file in {implementation_artifacts} using story_key pattern: {{story_key}}.md</action>
-    <action>Read COMPLETE story file from discovered path</action>
-
-    <anchor id="task_check" />
-
-    <action>Parse sections: Story, Acceptance Criteria, Tasks/Subtasks, Dev Notes, Dev Agent Record, File List, Change Log, Status</action>
-
-    <action>Load comprehensive context from story file's Dev Notes section</action>
-    <action>Extract developer guidance from Dev Notes: architecture requirements, previous learnings, technical specifications</action>
-    <action>Use enhanced story context to inform implementation decisions and approaches</action>
-
-    <action>Identify first incomplete task (unchecked [ ]) in Tasks/Subtasks</action>
-
-    <action if="no incomplete tasks">
-      <goto step="6">Completion sequence</goto>
-    </action>
-    <action if="story file inaccessible">HALT: "Cannot develop story without access to story file"</action>
-    <action if="incomplete task or subtask requirements ambiguous">ASK user to clarify or HALT</action>
-  </step>
-
-  <step n="2" goal="Load project context and story information">
-    <critical>Load all available context to inform implementation</critical>
-
-    <action>Load {project_context} for coding standards and project-wide patterns (if exists)</action>
-    <action>Parse sections: Story, Acceptance Criteria, Tasks/Subtasks, Dev Notes, Dev Agent Record, File List, Change Log, Status</action>
-    <action>Load comprehensive context from story file's Dev Notes section</action>
-    <action>Extract developer guidance from Dev Notes: architecture requirements, previous learnings, technical specifications</action>
-    <action>Use enhanced story context to inform implementation decisions and approaches</action>
-    <output>✅ **Context Loaded**
-      Story and project context available for implementation
-    </output>
-  </step>
-
-  <step n="3" goal="Detect review continuation and extract review context">
-    <critical>Determine if this is a fresh start or continuation after code review</critical>
-
-    <action>Check if "Senior Developer Review (AI)" section exists in the story file</action>
-    <action>Check if "Review Follow-ups (AI)" subsection exists under Tasks/Subtasks</action>
-
-    <check if="Senior Developer Review section exists">
-      <action>Set review_continuation = true</action>
-      <action>Extract from "Senior Developer Review (AI)" section:
-        - Review outcome (Approve/Changes Requested/Blocked)
-        - Review date
-        - Total action items with checkboxes (count checked vs unchecked)
-        - Severity breakdown (High/Med/Low counts)
-      </action>
-      <action>Count unchecked [ ] review follow-up tasks in "Review Follow-ups (AI)" subsection</action>
-      <action>Store list of unchecked review items as {{pending_review_items}}</action>
-
-      <output>⏯️ **Resuming Story After Code Review** ({{review_date}})
-
-        **Review Outcome:** {{review_outcome}}
-        **Action Items:** {{unchecked_review_count}} remaining to address
-        **Priorities:** {{high_count}} High, {{med_count}} Medium, {{low_count}} Low
-
-        **Strategy:** Will prioritize review follow-up tasks (marked [AI-Review]) before continuing with regular tasks.
-      </output>
-    </check>
-
-    <check if="Senior Developer Review section does NOT exist">
-      <action>Set review_continuation = false</action>
-      <action>Set {{pending_review_items}} = empty</action>
-
-      <output>🚀 **Starting Fresh Implementation**
-
-        Story: {{story_key}}
-        Story Status: {{current_status}}
-        First incomplete task: {{first_task_description}}
-      </output>
-    </check>
-  </step>
-
-  <step n="4" goal="Mark story in-progress" tag="sprint-status">
-    <check if="{{sprint_status}} file exists">
-      <action>Load the FULL file: {{sprint_status}}</action>
-      <action>Read all development_status entries to find {{story_key}}</action>
-      <action>Get current status value for development_status[{{story_key}}]</action>
-
-      <check if="current status == 'ready-for-dev' OR review_continuation == true">
-        <action>Update the story in the sprint status report to = "in-progress"</action>
-        <output>🚀 Starting work on story {{story_key}}
-          Status updated: ready-for-dev → in-progress
-        </output>
-      </check>
-
-      <check if="current status == 'in-progress'">
-        <output>⏯️ Resuming work on story {{story_key}}
-          Story is already marked in-progress
-        </output>
-      </check>
-
-      <check if="current status is neither ready-for-dev nor in-progress">
-        <output>⚠️ Unexpected story status: {{current_status}}
-          Expected ready-for-dev or in-progress. Continuing anyway...
-        </output>
-      </check>
-
-      <action>Store {{current_sprint_status}} for later use</action>
-    </check>
-
-    <check if="{{sprint_status}} file does NOT exist">
-      <output>ℹ️ No sprint status file exists - story progress will be tracked in story file only</output>
-      <action>Set {{current_sprint_status}} = "no-sprint-tracking"</action>
-    </check>
-  </step>
-
-  <step n="5" goal="Implement task following red-green-refactor cycle">
-    <critical>FOLLOW THE STORY FILE TASKS/SUBTASKS SEQUENCE EXACTLY AS WRITTEN - NO DEVIATION</critical>
-
-    <action>Review the current task/subtask from the story file - this is your authoritative implementation guide</action>
-    <action>Plan implementation following red-green-refactor cycle</action>
-
-    <!-- RED PHASE -->
-    <action>Write FAILING tests first for the task/subtask functionality</action>
-    <action>Confirm tests fail before implementation - this validates test correctness</action>
-
-    <!-- GREEN PHASE -->
-    <action>Implement MINIMAL code to make tests pass</action>
-    <action>Run tests to confirm they now pass</action>
-    <action>Handle error conditions and edge cases as specified in task/subtask</action>
-
-    <!-- REFACTOR PHASE -->
-    <action>Improve code structure while keeping tests green</action>
-    <action>Ensure code follows architecture patterns and coding standards from Dev Notes</action>
-
-    <action>Document technical approach and decisions in Dev Agent Record → Implementation Plan</action>
-
-    <action if="new dependencies required beyond story specifications">HALT: "Additional dependencies need user approval"</action>
-    <action if="3 consecutive implementation failures occur">HALT and request guidance</action>
-    <action if="required configuration is missing">HALT: "Cannot proceed without necessary configuration files"</action>
-
-    <critical>NEVER implement anything not mapped to a specific task/subtask in the story file</critical>
-    <critical>NEVER proceed to next task until current task/subtask is complete AND tests pass</critical>
-    <critical>Execute continuously without pausing until all tasks/subtasks are complete or explicit HALT condition</critical>
-    <critical>Do NOT propose to pause for review until Step 9 completion gates are satisfied</critical>
-  </step>
-
-  <step n="6" goal="Author comprehensive tests">
-    <action>Create unit tests for business logic and core functionality introduced/changed by the task</action>
-    <action>Add integration tests for component interactions specified in story requirements</action>
-    <action>Include end-to-end tests for critical user flows when story requirements demand them</action>
-    <action>Cover edge cases and error handling scenarios identified in story Dev Notes</action>
-  </step>
-
-  <step n="7" goal="Run validations and tests">
-    <action>Determine how to run tests for this repo (infer test framework from project structure)</action>
-    <action>Run all existing tests to ensure no regressions</action>
-    <action>Run the new tests to verify implementation correctness</action>
-    <action>Run linting and code quality checks if configured in project</action>
-    <action>Validate implementation meets ALL story acceptance criteria; enforce quantitative thresholds explicitly</action>
-    <action if="regression tests fail">STOP and fix before continuing - identify breaking changes immediately</action>
-    <action if="new tests fail">STOP and fix before continuing - ensure implementation correctness</action>
-  </step>
-
-  <step n="8" goal="Validate and mark task complete ONLY when fully done">
-    <critical>NEVER mark a task complete unless ALL conditions are met - NO LYING OR CHEATING</critical>
-
-    <!-- VALIDATION GATES -->
-    <action>Verify ALL tests for this task/subtask ACTUALLY EXIST and PASS 100%</action>
-    <action>Confirm implementation matches EXACTLY what the task/subtask specifies - no extra features</action>
-    <action>Validate that ALL acceptance criteria related to this task are satisfied</action>
-    <action>Run full test suite to ensure NO regressions introduced</action>
-
-    <!-- REVIEW FOLLOW-UP HANDLING -->
-    <check if="task is review follow-up (has [AI-Review] prefix)">
-      <action>Extract review item details (severity, description, related AC/file)</action>
-      <action>Add to resolution tracking list: {{resolved_review_items}}</action>
-
-      <!-- Mark task in Review Follow-ups section -->
-      <action>Mark task checkbox [x] in "Tasks/Subtasks → Review Follow-ups (AI)" section</action>
-
-      <!-- CRITICAL: Also mark corresponding action item in review section -->
-      <action>Find matching action item in "Senior Developer Review (AI) → Action Items" section by matching description</action>
-      <action>Mark that action item checkbox [x] as resolved</action>
-
-      <action>Add to Dev Agent Record → Completion Notes: "✅ Resolved review finding [{{severity}}]: {{description}}"</action>
-    </check>
-
-    <!-- ONLY MARK COMPLETE IF ALL VALIDATION PASS -->
-    <check if="ALL validation gates pass AND tests ACTUALLY exist and pass">
-      <action>ONLY THEN mark the task (and subtasks) checkbox with [x]</action>
-      <action>Update File List section with ALL new, modified, or deleted files (paths relative to repo root)</action>
-      <action>Add completion notes to Dev Agent Record summarizing what was ACTUALLY implemented and tested</action>
-    </check>
-
-    <check if="ANY validation fails">
-      <action>DO NOT mark task complete - fix issues first</action>
-      <action>HALT if unable to fix validation failures</action>
-    </check>
-
-    <check if="review_continuation == true and {{resolved_review_items}} is not empty">
-      <action>Count total resolved review items in this session</action>
-      <action>Add Change Log entry: "Addressed code review findings - {{resolved_count}} items resolved (Date: {{date}})"</action>
-    </check>
-
-    <action>Save the story file</action>
-    <action>Determine if more incomplete tasks remain</action>
-    <action if="more tasks remain">
-      <goto step="5">Next task</goto>
-    </action>
-    <action if="no tasks remain">
-      <goto step="9">Completion</goto>
-    </action>
-  </step>
-
-  <step n="9" goal="Story completion and mark for review" tag="sprint-status">
-    <action>Verify ALL tasks and subtasks are marked [x] (re-scan the story document now)</action>
-    <action>Run the full regression suite (do not skip)</action>
-    <action>Confirm File List includes every changed file</action>
-    <action>Execute enhanced definition-of-done validation</action>
-    <action>Update the story Status to: "review"</action>
-
-    <!-- Enhanced Definition of Done Validation -->
-    <action>Validate definition-of-done checklist with essential requirements:
-      - All tasks/subtasks marked complete with [x]
-      - Implementation satisfies every Acceptance Criterion
-      - Unit tests for core functionality added/updated
-      - Integration tests for component interactions added when required
-      - End-to-end tests for critical flows added when story demands them
-      - All tests pass (no regressions, new tests successful)
-      - Code quality checks pass (linting, static analysis if configured)
-      - File List includes every new/modified/deleted file (relative paths)
-      - Dev Agent Record contains implementation notes
-      - Change Log includes summary of changes
-      - Only permitted story sections were modified
-    </action>
-
-    <!-- Mark story ready for review - sprint status conditional -->
-    <check if="{sprint_status} file exists AND {{current_sprint_status}} != 'no-sprint-tracking'">
-      <action>Load the FULL file: {sprint_status}</action>
-      <action>Find development_status key matching {{story_key}}</action>
-      <action>Verify current status is "in-progress" (expected previous state)</action>
-      <action>Update development_status[{{story_key}}] = "review"</action>
-      <action>Save file, preserving ALL comments and structure including STATUS DEFINITIONS</action>
-      <output>✅ Story status updated to "review" in sprint-status.yaml</output>
-    </check>
-
-    <check if="{sprint_status} file does NOT exist OR {{current_sprint_status}} == 'no-sprint-tracking'">
-      <output>ℹ️ Story status updated to "review" in story file (no sprint tracking configured)</output>
-    </check>
-
-    <check if="story key not found in sprint status">
-      <output>⚠️ Story file updated, but sprint-status update failed: {{story_key}} not found
-
-        Story status is set to "review" in file, but sprint-status.yaml may be out of sync.
-      </output>
-    </check>
-
-    <!-- Final validation gates -->
-    <action if="any task is incomplete">HALT - Complete remaining tasks before marking ready for review</action>
-    <action if="regression failures exist">HALT - Fix regression issues before completing</action>
-    <action if="File List is incomplete">HALT - Update File List with all changed files</action>
-    <action if="definition-of-done validation fails">HALT - Address DoD failures before completing</action>
-  </step>
-
-  <step n="10" goal="Completion communication and user support">
-    <action>Execute the enhanced definition-of-done checklist using the validation framework</action>
-    <action>Prepare a concise summary in Dev Agent Record → Completion Notes</action>
-
-    <action>Communicate to {user_name} that story implementation is complete and ready for review</action>
-    <action>Summarize key accomplishments: story ID, story key, title, key changes made, tests added, files modified</action>
-    <action>Provide the story file path and current status (now "review")</action>
-
-    <action>Based on {user_skill_level}, ask if user needs any explanations about:
-      - What was implemented and how it works
-      - Why certain technical decisions were made
-      - How to test or verify the changes
-      - Any patterns, libraries, or approaches used
-      - Anything else they'd like clarified
-    </action>
-
-    <check if="user asks for explanations">
-      <action>Provide clear, contextual explanations tailored to {user_skill_level}</action>
-      <action>Use examples and references to specific code when helpful</action>
-    </check>
-
-    <action>Once explanations are complete (or user indicates no questions), suggest logical next steps</action>
-    <action>Recommended next steps (flexible based on project setup):
-      - Review the implemented story and test the changes
-      - Verify all acceptance criteria are met
-      - Ensure deployment readiness if applicable
-      - Run `code-review` workflow for peer review
-      - Optional: If Test Architect module installed, run `/bmad:tea:automate` to expand guardrail tests
-    </action>
-
-    <output>💡 **Tip:** For best results, run `code-review` using a **different** LLM than the one that implemented this story.</output>
-    <check if="{sprint_status} file exists">
-      <action>Suggest checking {sprint_status} to see project progress</action>
-    </check>
-    <action>Remain flexible - allow user to choose their own path or ask for other assistance</action>
-  </step>
-
-</workflow>

package/templates/bmad/bmm/workflows/4-implementation/dev-story/workflow.yaml

@@ -1,20 +0,0 @@
-name: dev-story
-description: 'Execute story implementation following a context filled story spec file. Use when the user says "dev this story [story file]" or "implement the next story in the sprint plan"'
-
-# Critical variables from config
-config_source: "{project-root}/_bmad/bmm/config.yaml"
-user_name: "{config_source}:user_name"
-communication_language: "{config_source}:communication_language"
-user_skill_level: "{config_source}:user_skill_level"
-document_output_language: "{config_source}:document_output_language"
-date: system-generated
-
-# Workflow components
-installed_path: "{project-root}/_bmad/bmm/workflows/4-implementation/dev-story"
-instructions: "{installed_path}/instructions.xml"
-validation: "{installed_path}/checklist.md"
-
-story_file: "" # Explicit story path; auto-discovered if empty
-implementation_artifacts: "{config_source}:implementation_artifacts"
-sprint_status: "{implementation_artifacts}/sprint-status.yaml"
-project_context: "**/project-context.md"