@atlashub/smartstack-cli 3.39.0 → 3.40.0

package/templates/hooks/stop-hook.sh

@@ -1,177 +1,177 @@
-#!/bin/bash
-
-# Ralph Loop Stop Hook
-# Prevents session exit when a ralph-loop is active
-# Feeds Claude's output back as input to continue the loop
-
-set -euo pipefail
-
-# Read hook input from stdin (advanced stop hook API)
-HOOK_INPUT=$(cat)
-
-# Check if ralph-loop is active
-RALPH_STATE_FILE=".claude/ralph-loop.local.md"
-
-if [[ ! -f "$RALPH_STATE_FILE" ]]; then
-  # No active loop - allow exit
-  exit 0
-fi
-
-# Parse markdown frontmatter (YAML between ---) and extract values
-FRONTMATTER=$(sed -n '/^---$/,/^---$/{ /^---$/d; p; }' "$RALPH_STATE_FILE")
-ITERATION=$(echo "$FRONTMATTER" | grep '^iteration:' | sed 's/iteration: *//')
-MAX_ITERATIONS=$(echo "$FRONTMATTER" | grep '^max_iterations:' | sed 's/max_iterations: *//')
-# Extract completion_promise and strip surrounding quotes if present
-COMPLETION_PROMISE=$(echo "$FRONTMATTER" | grep '^completion_promise:' | sed 's/completion_promise: *//' | sed 's/^"\(.*\)"$/\1/')
-
-# Validate numeric fields before arithmetic operations
-if [[ ! "$ITERATION" =~ ^[0-9]+$ ]]; then
-  echo "⚠️  Ralph loop: State file corrupted" >&2
-  echo "   File: $RALPH_STATE_FILE" >&2
-  echo "   Problem: 'iteration' field is not a valid number (got: '$ITERATION')" >&2
-  echo "" >&2
-  echo "   This usually means the state file was manually edited or corrupted." >&2
-  echo "   Ralph loop is stopping. Run /ralph-loop again to start fresh." >&2
-  rm "$RALPH_STATE_FILE"
-  exit 0
-fi
-
-if [[ ! "$MAX_ITERATIONS" =~ ^[0-9]+$ ]]; then
-  echo "⚠️  Ralph loop: State file corrupted" >&2
-  echo "   File: $RALPH_STATE_FILE" >&2
-  echo "   Problem: 'max_iterations' field is not a valid number (got: '$MAX_ITERATIONS')" >&2
-  echo "" >&2
-  echo "   This usually means the state file was manually edited or corrupted." >&2
-  echo "   Ralph loop is stopping. Run /ralph-loop again to start fresh." >&2
-  rm "$RALPH_STATE_FILE"
-  exit 0
-fi
-
-# Check if max iterations reached
-if [[ $MAX_ITERATIONS -gt 0 ]] && [[ $ITERATION -ge $MAX_ITERATIONS ]]; then
-  echo "🛑 Ralph loop: Max iterations ($MAX_ITERATIONS) reached."
-  rm "$RALPH_STATE_FILE"
-  exit 0
-fi
-
-# Get transcript path from hook input
-TRANSCRIPT_PATH=$(echo "$HOOK_INPUT" | jq -r '.transcript_path')
-
-if [[ ! -f "$TRANSCRIPT_PATH" ]]; then
-  echo "⚠️  Ralph loop: Transcript file not found" >&2
-  echo "   Expected: $TRANSCRIPT_PATH" >&2
-  echo "   This is unusual and may indicate a Claude Code internal issue." >&2
-  echo "   Ralph loop is stopping." >&2
-  rm "$RALPH_STATE_FILE"
-  exit 0
-fi
-
-# Read last assistant message from transcript (JSONL format - one JSON per line)
-# First check if there are any assistant messages
-if ! grep -q '"role":"assistant"' "$TRANSCRIPT_PATH"; then
-  echo "⚠️  Ralph loop: No assistant messages found in transcript" >&2
-  echo "   Transcript: $TRANSCRIPT_PATH" >&2
-  echo "   This is unusual and may indicate a transcript format issue" >&2
-  echo "   Ralph loop is stopping." >&2
-  rm "$RALPH_STATE_FILE"
-  exit 0
-fi
-
-# Extract last assistant message with explicit error handling
-LAST_LINE=$(grep '"role":"assistant"' "$TRANSCRIPT_PATH" | tail -1)
-if [[ -z "$LAST_LINE" ]]; then
-  echo "⚠️  Ralph loop: Failed to extract last assistant message" >&2
-  echo "   Ralph loop is stopping." >&2
-  rm "$RALPH_STATE_FILE"
-  exit 0
-fi
-
-# Parse JSON with error handling
-LAST_OUTPUT=$(echo "$LAST_LINE" | jq -r '
-  .message.content |
-  map(select(.type == "text")) |
-  map(.text) |
-  join("\n")
-' 2>&1)
-
-# Check if jq succeeded
-if [[ $? -ne 0 ]]; then
-  echo "⚠️  Ralph loop: Failed to parse assistant message JSON" >&2
-  echo "   Error: $LAST_OUTPUT" >&2
-  echo "   This may indicate a transcript format issue" >&2
-  echo "   Ralph loop is stopping." >&2
-  rm "$RALPH_STATE_FILE"
-  exit 0
-fi
-
-if [[ -z "$LAST_OUTPUT" ]]; then
-  echo "⚠️  Ralph loop: Assistant message contained no text content" >&2
-  echo "   Ralph loop is stopping." >&2
-  rm "$RALPH_STATE_FILE"
-  exit 0
-fi
-
-# Check for completion promise (only if set)
-if [[ "$COMPLETION_PROMISE" != "null" ]] && [[ -n "$COMPLETION_PROMISE" ]]; then
-  # Extract text from <promise> tags using Perl for multiline support
-  # -0777 slurps entire input, s flag makes . match newlines
-  # .*? is non-greedy (takes FIRST tag), whitespace normalized
-  PROMISE_TEXT=$(echo "$LAST_OUTPUT" | perl -0777 -pe 's/.*?<promise>(.*?)<\/promise>.*/$1/s; s/^\s+|\s+$//g; s/\s+/ /g' 2>/dev/null || echo "")
-
-  # Use = for literal string comparison (not pattern matching)
-  # == in [[ ]] does glob pattern matching which breaks with *, ?, [ characters
-  if [[ -n "$PROMISE_TEXT" ]] && [[ "$PROMISE_TEXT" = "$COMPLETION_PROMISE" ]]; then
-    echo "✅ Ralph loop: Detected <promise>$COMPLETION_PROMISE</promise>"
-    rm "$RALPH_STATE_FILE"
-    exit 0
-  fi
-fi
-
-# Not complete - continue loop with SAME PROMPT
-NEXT_ITERATION=$((ITERATION + 1))
-
-# Extract prompt (everything after the closing ---)
-# Skip first --- line, skip until second --- line, then print everything after
-# Use i>=2 instead of i==2 to handle --- in prompt content
-PROMPT_TEXT=$(awk '/^---$/{i++; next} i>=2' "$RALPH_STATE_FILE")
-
-if [[ -z "$PROMPT_TEXT" ]]; then
-  echo "⚠️  Ralph loop: State file corrupted or incomplete" >&2
-  echo "   File: $RALPH_STATE_FILE" >&2
-  echo "   Problem: No prompt text found" >&2
-  echo "" >&2
-  echo "   This usually means:" >&2
-  echo "     • State file was manually edited" >&2
-  echo "     • File was corrupted during writing" >&2
-  echo "" >&2
-  echo "   Ralph loop is stopping. Run /ralph-loop again to start fresh." >&2
-  rm "$RALPH_STATE_FILE"
-  exit 0
-fi
-
-# Update iteration in frontmatter (portable across macOS and Linux)
-# Create temp file, then atomically replace
-TEMP_FILE="${RALPH_STATE_FILE}.tmp.$$"
-sed "s/^iteration: .*/iteration: $NEXT_ITERATION/" "$RALPH_STATE_FILE" > "$TEMP_FILE"
-mv "$TEMP_FILE" "$RALPH_STATE_FILE"
-
-# Build system message with iteration count and completion promise info
-if [[ "$COMPLETION_PROMISE" != "null" ]] && [[ -n "$COMPLETION_PROMISE" ]]; then
-  SYSTEM_MSG="🔄 Ralph iteration $NEXT_ITERATION | To stop: output <promise>$COMPLETION_PROMISE</promise> (ONLY when statement is TRUE - do not lie to exit!)"
-else
-  SYSTEM_MSG="🔄 Ralph iteration $NEXT_ITERATION | No completion promise set - loop runs infinitely"
-fi
-
-# Output JSON to block the stop and feed prompt back
-# The "reason" field contains the prompt that will be sent back to Claude
-jq -n \
-  --arg prompt "$PROMPT_TEXT" \
-  --arg msg "$SYSTEM_MSG" \
-  '{
-    "decision": "block",
-    "reason": $prompt,
-    "systemMessage": $msg
-  }'
-
-# Exit 0 for successful hook execution
-exit 0
+#!/bin/bash
+
+# Ralph Loop Stop Hook
+# Prevents session exit when a ralph-loop is active
+# Feeds Claude's output back as input to continue the loop
+
+set -euo pipefail
+
+# Read hook input from stdin (advanced stop hook API)
+HOOK_INPUT=$(cat)
+
+# Check if ralph-loop is active
+RALPH_STATE_FILE=".claude/ralph-loop.local.md"
+
+if [[ ! -f "$RALPH_STATE_FILE" ]]; then
+  # No active loop - allow exit
+  exit 0
+fi
+
+# Parse markdown frontmatter (YAML between ---) and extract values
+FRONTMATTER=$(sed -n '/^---$/,/^---$/{ /^---$/d; p; }' "$RALPH_STATE_FILE")
+ITERATION=$(echo "$FRONTMATTER" | grep '^iteration:' | sed 's/iteration: *//')
+MAX_ITERATIONS=$(echo "$FRONTMATTER" | grep '^max_iterations:' | sed 's/max_iterations: *//')
+# Extract completion_promise and strip surrounding quotes if present
+COMPLETION_PROMISE=$(echo "$FRONTMATTER" | grep '^completion_promise:' | sed 's/completion_promise: *//' | sed 's/^"\(.*\)"$/\1/')
+
+# Validate numeric fields before arithmetic operations
+if [[ ! "$ITERATION" =~ ^[0-9]+$ ]]; then
+  echo "⚠️  Ralph loop: State file corrupted" >&2
+  echo "   File: $RALPH_STATE_FILE" >&2
+  echo "   Problem: 'iteration' field is not a valid number (got: '$ITERATION')" >&2
+  echo "" >&2
+  echo "   This usually means the state file was manually edited or corrupted." >&2
+  echo "   Ralph loop is stopping. Run /ralph-loop again to start fresh." >&2
+  rm "$RALPH_STATE_FILE"
+  exit 0
+fi
+
+if [[ ! "$MAX_ITERATIONS" =~ ^[0-9]+$ ]]; then
+  echo "⚠️  Ralph loop: State file corrupted" >&2
+  echo "   File: $RALPH_STATE_FILE" >&2
+  echo "   Problem: 'max_iterations' field is not a valid number (got: '$MAX_ITERATIONS')" >&2
+  echo "" >&2
+  echo "   This usually means the state file was manually edited or corrupted." >&2
+  echo "   Ralph loop is stopping. Run /ralph-loop again to start fresh." >&2
+  rm "$RALPH_STATE_FILE"
+  exit 0
+fi
+
+# Check if max iterations reached
+if [[ $MAX_ITERATIONS -gt 0 ]] && [[ $ITERATION -ge $MAX_ITERATIONS ]]; then
+  echo "🛑 Ralph loop: Max iterations ($MAX_ITERATIONS) reached."
+  rm "$RALPH_STATE_FILE"
+  exit 0
+fi
+
+# Get transcript path from hook input
+TRANSCRIPT_PATH=$(echo "$HOOK_INPUT" | jq -r '.transcript_path')
+
+if [[ ! -f "$TRANSCRIPT_PATH" ]]; then
+  echo "⚠️  Ralph loop: Transcript file not found" >&2
+  echo "   Expected: $TRANSCRIPT_PATH" >&2
+  echo "   This is unusual and may indicate a Claude Code internal issue." >&2
+  echo "   Ralph loop is stopping." >&2
+  rm "$RALPH_STATE_FILE"
+  exit 0
+fi
+
+# Read last assistant message from transcript (JSONL format - one JSON per line)
+# First check if there are any assistant messages
+if ! grep -q '"role":"assistant"' "$TRANSCRIPT_PATH"; then
+  echo "⚠️  Ralph loop: No assistant messages found in transcript" >&2
+  echo "   Transcript: $TRANSCRIPT_PATH" >&2
+  echo "   This is unusual and may indicate a transcript format issue" >&2
+  echo "   Ralph loop is stopping." >&2
+  rm "$RALPH_STATE_FILE"
+  exit 0
+fi
+
+# Extract last assistant message with explicit error handling
+LAST_LINE=$(grep '"role":"assistant"' "$TRANSCRIPT_PATH" | tail -1)
+if [[ -z "$LAST_LINE" ]]; then
+  echo "⚠️  Ralph loop: Failed to extract last assistant message" >&2
+  echo "   Ralph loop is stopping." >&2
+  rm "$RALPH_STATE_FILE"
+  exit 0
+fi
+
+# Parse JSON with error handling
+LAST_OUTPUT=$(echo "$LAST_LINE" | jq -r '
+  .message.content |
+  map(select(.type == "text")) |
+  map(.text) |
+  join("\n")
+' 2>&1)
+
+# Check if jq succeeded
+if [[ $? -ne 0 ]]; then
+  echo "⚠️  Ralph loop: Failed to parse assistant message JSON" >&2
+  echo "   Error: $LAST_OUTPUT" >&2
+  echo "   This may indicate a transcript format issue" >&2
+  echo "   Ralph loop is stopping." >&2
+  rm "$RALPH_STATE_FILE"
+  exit 0
+fi
+
+if [[ -z "$LAST_OUTPUT" ]]; then
+  echo "⚠️  Ralph loop: Assistant message contained no text content" >&2
+  echo "   Ralph loop is stopping." >&2
+  rm "$RALPH_STATE_FILE"
+  exit 0
+fi
+
+# Check for completion promise (only if set)
+if [[ "$COMPLETION_PROMISE" != "null" ]] && [[ -n "$COMPLETION_PROMISE" ]]; then
+  # Extract text from <promise> tags using Perl for multiline support
+  # -0777 slurps entire input, s flag makes . match newlines
+  # .*? is non-greedy (takes FIRST tag), whitespace normalized
+  PROMISE_TEXT=$(echo "$LAST_OUTPUT" | perl -0777 -pe 's/.*?<promise>(.*?)<\/promise>.*/$1/s; s/^\s+|\s+$//g; s/\s+/ /g' 2>/dev/null || echo "")
+
+  # Use = for literal string comparison (not pattern matching)
+  # == in [[ ]] does glob pattern matching which breaks with *, ?, [ characters
+  if [[ -n "$PROMISE_TEXT" ]] && [[ "$PROMISE_TEXT" = "$COMPLETION_PROMISE" ]]; then
+    echo "✅ Ralph loop: Detected <promise>$COMPLETION_PROMISE</promise>"
+    rm "$RALPH_STATE_FILE"
+    exit 0
+  fi
+fi
+
+# Not complete - continue loop with SAME PROMPT
+NEXT_ITERATION=$((ITERATION + 1))
+
+# Extract prompt (everything after the closing ---)
+# Skip first --- line, skip until second --- line, then print everything after
+# Use i>=2 instead of i==2 to handle --- in prompt content
+PROMPT_TEXT=$(awk '/^---$/{i++; next} i>=2' "$RALPH_STATE_FILE")
+
+if [[ -z "$PROMPT_TEXT" ]]; then
+  echo "⚠️  Ralph loop: State file corrupted or incomplete" >&2
+  echo "   File: $RALPH_STATE_FILE" >&2
+  echo "   Problem: No prompt text found" >&2
+  echo "" >&2
+  echo "   This usually means:" >&2
+  echo "     • State file was manually edited" >&2
+  echo "     • File was corrupted during writing" >&2
+  echo "" >&2
+  echo "   Ralph loop is stopping. Run /ralph-loop again to start fresh." >&2
+  rm "$RALPH_STATE_FILE"
+  exit 0
+fi
+
+# Update iteration in frontmatter (portable across macOS and Linux)
+# Create temp file, then atomically replace
+TEMP_FILE="${RALPH_STATE_FILE}.tmp.$$"
+sed "s/^iteration: .*/iteration: $NEXT_ITERATION/" "$RALPH_STATE_FILE" > "$TEMP_FILE"
+mv "$TEMP_FILE" "$RALPH_STATE_FILE"
+
+# Build system message with iteration count and completion promise info
+if [[ "$COMPLETION_PROMISE" != "null" ]] && [[ -n "$COMPLETION_PROMISE" ]]; then
+  SYSTEM_MSG="🔄 Ralph iteration $NEXT_ITERATION | To stop: output <promise>$COMPLETION_PROMISE</promise> (ONLY when statement is TRUE - do not lie to exit!)"
+else
+  SYSTEM_MSG="🔄 Ralph iteration $NEXT_ITERATION | No completion promise set - loop runs infinitely"
+fi
+
+# Output JSON to block the stop and feed prompt back
+# The "reason" field contains the prompt that will be sent back to Claude
+jq -n \
+  --arg prompt "$PROMPT_TEXT" \
+  --arg msg "$SYSTEM_MSG" \
+  '{
+    "decision": "block",
+    "reason": $prompt,
+    "systemMessage": $msg
+  }'
+
+# Exit 0 for successful hook execution
+exit 0

package/templates/hooks/wsl-dotnet-cleanup.sh

@@ -1,24 +1,24 @@
-#!/bin/bash
-
-# WSL Dotnet Cleanup - PostToolUse Hook
-# Removes literal "bin\Debug" folders created by Roslyn BuildHost on WSL
-# Roslyn uses Windows path separators, creating "bin\Debug" as a single folder name
-# instead of the proper bin/Debug/ directory structure.
-
-set -euo pipefail
-
-HOOK_INPUT=$(cat)
-
-# Quick exit: only care about Bash tool calls containing "dotnet" (~1ms)
-case "$HOOK_INPUT" in
-  *dotnet*) ;; # proceed to cleanup
-  *) exit 0 ;; # fast exit
-esac
-
-# Find and remove corrupted bin\Debug folders (literal backslash in name)
-# bin?Debug matches "bin\Debug" where ? is the literal backslash character
-for d in src/*/bin?Debug bin?Debug; do
-  [ -d "$d" ] && rm -rf "$d"
-done
-
-exit 0
+#!/bin/bash
+
+# WSL Dotnet Cleanup - PostToolUse Hook
+# Removes literal "bin\Debug" folders created by Roslyn BuildHost on WSL
+# Roslyn uses Windows path separators, creating "bin\Debug" as a single folder name
+# instead of the proper bin/Debug/ directory structure.
+
+set -euo pipefail
+
+HOOK_INPUT=$(cat)
+
+# Quick exit: only care about Bash tool calls containing "dotnet" (~1ms)
+case "$HOOK_INPUT" in
+  *dotnet*) ;; # proceed to cleanup
+  *) exit 0 ;; # fast exit
+esac
+
+# Find and remove corrupted bin\Debug folders (literal backslash in name)
+# bin?Debug matches "bin\Debug" where ? is the literal backslash character
+for d in src/*/bin?Debug bin?Debug; do
+  [ -d "$d" ] && rm -rf "$d"
+done
+
+exit 0