@antv/l7-layers 2.9.19 → 2.9.22-alpha.0

package/lib/polygon/shaders/extrude/polygon_extrude_frag.glsl

@@ -0,0 +1,44 @@
+uniform float u_opacity: 1.0;
+uniform vec4 u_sourceColor;
+uniform vec4 u_targetColor;
+uniform float u_linearColor: 0;
+
+uniform float u_topsurface: 1.0;
+uniform float u_sidesurface: 1.0;
+
+varying vec4 v_Color;
+varying mat4 styleMappingMat; // 传递从片元中传递的映射数据
+#pragma include "picking"
+
+void main() {
+  float opacity = styleMappingMat[0][0];  
+  float isSide = styleMappingMat[0][3];
+  float sidey = styleMappingMat[3][0];
+  float lightWeight = styleMappingMat[3][1];
+
+  if(isSide < 1.0) {
+    // side face
+    if(u_sidesurface < 1.0) {
+      discard;
+    }
+
+    if(u_linearColor == 1.0) {
+      vec4 linearColor = mix(u_targetColor, u_sourceColor, sidey);
+      linearColor.rgb *= lightWeight;
+      gl_FragColor = linearColor;
+    } else {
+      gl_FragColor = v_Color;
+    }
+
+  } else {
+     // top face
+    if(u_topsurface < 1.0) {
+      discard;
+    }
+
+    gl_FragColor = v_Color;
+  }
+
+  gl_FragColor.a *= opacity;
+  gl_FragColor = filterColor(gl_FragColor);
+}

package/lib/polygon/shaders/extrude/polygon_extrude_picklight_frag.glsl

@@ -0,0 +1,44 @@
+uniform float u_opacity: 1.0;
+uniform vec4 u_sourceColor;
+uniform vec4 u_targetColor;
+uniform float u_linearColor: 0;
+
+uniform float u_topsurface: 1.0;
+uniform float u_sidesurface: 1.0;
+
+varying vec4 v_Color;
+varying mat4 styleMappingMat; // 传递从片元中传递的映射数据
+#pragma include "picking"
+
+void main() {
+  float opacity = styleMappingMat[0][0];
+  float isSide = styleMappingMat[0][3];
+  float sidey = styleMappingMat[3][0];
+  float lightWeight = styleMappingMat[3][1];
+
+  if(isSide < 1.0) {
+    // side face
+    if(u_sidesurface < 1.0) {
+      discard;
+    }
+    
+    if( u_linearColor == 1.0) {
+      // side use linear
+      vec4 linearColor = mix(u_targetColor, u_sourceColor, sidey);
+      linearColor.rgb *= lightWeight;
+      gl_FragColor = linearColor;
+    } else {
+      // side notuse linear
+       gl_FragColor = v_Color;
+    }
+  } else {
+    // top face
+    if(u_topsurface < 1.0) {
+      discard;
+    }
+    gl_FragColor = v_Color;
+  }
+
+  gl_FragColor.a *= opacity;
+  gl_FragColor = filterColorAlpha(gl_FragColor, lightWeight);
+}

package/lib/polygon/shaders/extrude/polygon_extrude_picklight_vert.glsl

@@ -0,0 +1,85 @@
+precision highp float;
+
+#define ambientRatio 0.5
+#define diffuseRatio 0.3
+#define specularRatio 0.2
+
+attribute vec4 a_Color;
+attribute vec3 a_Position;
+attribute vec3 a_Normal;
+attribute float a_Size;
+attribute vec3 a_uvs;
+uniform mat4 u_ModelMatrix;
+uniform mat4 u_Mvp;
+
+varying vec4 v_Color;
+uniform float u_heightfixed: 0.0; // 默认不固定
+uniform float u_raisingHeight: 0.0;
+uniform float u_opacity: 1.0;
+varying mat4 styleMappingMat; // 用于将在顶点着色器中计算好的样式值传递给片元
+
+#pragma include "styleMapping"
+#pragma include "styleMappingCalOpacity"
+
+#pragma include "projection"
+#pragma include "light"
+#pragma include "picking"
+
+void main() {
+  // cal style mapping - 数据纹理映射部分的计算
+  styleMappingMat = mat4(
+    0.0, 0.0, 0.0, 0.0, // opacity - strokeOpacity - strokeWidth - isSide
+    0.0, 0.0, 0.0, 0.0, // strokeR - strokeG - strokeB - strokeA
+    0.0, 0.0, 0.0, 0.0, // offsets[0] - offsets[1]
+    0.0, 0.0, 0.0, 0.0  // sidey
+  );
+  styleMappingMat[0][3] = a_Position.z;
+  styleMappingMat[3][0] = a_uvs[2];
+
+  float rowCount = u_cellTypeLayout[0][0];    // 当前的数据纹理有几行
+  float columnCount = u_cellTypeLayout[0][1]; // 当看到数据纹理有几列
+  float columnWidth = 1.0/columnCount;  // 列宽
+  float rowHeight = 1.0/rowCount;       // 行高
+  float cellCount = calCellCount(); // opacity - strokeOpacity - strokeWidth - stroke - offsets
+  float id = a_vertexId; // 第n个顶点
+  float cellCurrentRow = floor(id * cellCount / columnCount) + 1.0; // 起始点在第几行
+  float cellCurrentColumn = mod(id * cellCount, columnCount) + 1.0; // 起始点在第几列
+  
+  // cell 固定顺序 opacity -> strokeOpacity -> strokeWidth -> stroke ... 
+  // 按顺序从 cell 中取值、若没有则自动往下取值
+  float textureOffset = 0.0; // 在 cell 中取值的偏移量
+
+  vec2 opacityAndOffset = calOpacityAndOffset(cellCurrentRow, cellCurrentColumn, columnCount, textureOffset, columnWidth, rowHeight);
+  styleMappingMat[0][0] = opacityAndOffset.r;
+  textureOffset = opacityAndOffset.g;
+  // cal style mapping - 数据纹理映射部分的计算
+  vec4 pos = vec4(a_Position.xy, a_Position.z * a_Size, 1.0);
+  vec4 project_pos = project_position(pos);
+
+  if(u_heightfixed > 0.0) { // 判断几何体是否固定高度
+    project_pos.z = a_Position.z * a_Size;
+    project_pos.z += u_raisingHeight;
+    if(u_CoordinateSystem == COORDINATE_SYSTEM_LNGLAT || u_CoordinateSystem == COORDINATE_SYSTEM_LNGLAT_OFFSET) {
+      float mapboxZoomScale = 4.0/pow(2.0, 21.0 - u_Zoom);
+      project_pos.z *= mapboxZoomScale;
+      project_pos.z += u_raisingHeight * mapboxZoomScale;
+    }
+  }
+
+  // gl_Position = project_common_position_to_clipspace(vec4(project_pos.xyz, 1.0));
+
+  if(u_CoordinateSystem == COORDINATE_SYSTEM_P20_2) { // gaode2.x
+    // gl_Position = u_Mvp * (vec4(project_pos.xyz * vec3(1.0, 1.0, -1.0), 1.0));
+    gl_Position = u_Mvp * (vec4(project_pos.xyz, 1.0));
+  } else {
+    gl_Position = project_common_position_to_clipspace(vec4(project_pos.xyz, 1.0));
+  }
+
+  float lightWeight = calc_lighting(pos);
+  // v_Color = a_Color;
+  v_Color = vec4(a_Color.rgb * lightWeight, a_Color.w);
+
+  styleMappingMat[3][1] = lightWeight;
+
+  setPickingColor(a_PickingColor);
+}

package/lib/polygon/shaders/extrude/polygon_extrude_vert.glsl

@@ -0,0 +1,90 @@
+precision highp float;
+
+#define ambientRatio 0.5
+#define diffuseRatio 0.3
+#define specularRatio 0.2
+
+attribute vec4 a_Color;
+attribute vec3 a_Position;
+attribute vec3 a_Normal;
+attribute float a_Size;
+attribute vec3 a_uvs;
+uniform mat4 u_ModelMatrix;
+uniform mat4 u_Mvp;
+
+varying vec4 v_Color;
+uniform float u_heightfixed: 0.0; // 默认不固定
+uniform float u_raisingHeight: 0.0;
+uniform float u_opacity: 1.0;
+varying mat4 styleMappingMat; // 用于将在顶点着色器中计算好的样式值传递给片元
+
+#pragma include "styleMapping"
+#pragma include "styleMappingCalOpacity"
+
+#pragma include "projection"
+#pragma include "light"
+#pragma include "picking"
+
+void main() {
+  // cal style mapping - 数据纹理映射部分的计算
+  styleMappingMat = mat4(
+    0.0, 0.0, 0.0, 0.0, // opacity - strokeOpacity - strokeWidth - isSide
+    0.0, 0.0, 0.0, 0.0, // strokeR - strokeG - strokeB - strokeA
+    0.0, 0.0, 0.0, 0.0, // offsets[0] - offsets[1]
+    0.0, 0.0, 0.0, 0.0  // sidey
+  );
+  styleMappingMat[0][3] = a_Position.z;
+  styleMappingMat[3][0] = a_uvs[2];
+
+  float rowCount = u_cellTypeLayout[0][0];    // 当前的数据纹理有几行
+  float columnCount = u_cellTypeLayout[0][1]; // 当看到数据纹理有几列
+  float columnWidth = 1.0/columnCount;  // 列宽
+  float rowHeight = 1.0/rowCount;       // 行高
+  float cellCount = calCellCount(); // opacity - strokeOpacity - strokeWidth - stroke - offsets
+  float id = a_vertexId; // 第n个顶点
+  float cellCurrentRow = floor(id * cellCount / columnCount) + 1.0; // 起始点在第几行
+  float cellCurrentColumn = mod(id * cellCount, columnCount) + 1.0; // 起始点在第几列
+  
+  // cell 固定顺序 opacity -> strokeOpacity -> strokeWidth -> stroke ... 
+  // 按顺序从 cell 中取值、若没有则自动往下取值
+  float textureOffset = 0.0; // 在 cell 中取值的偏移量
+
+  vec2 opacityAndOffset = calOpacityAndOffset(cellCurrentRow, cellCurrentColumn, columnCount, textureOffset, columnWidth, rowHeight);
+  styleMappingMat[0][0] = opacityAndOffset.r;
+  textureOffset = opacityAndOffset.g;
+  // cal style mapping - 数据纹理映射部分的计算
+
+  vec4 pos = vec4(a_Position.xy, a_Position.z * a_Size, 1.0);
+  vec4 project_pos = project_position(pos);
+
+  if(u_heightfixed > 0.0) { // 判断几何体是否固定高度
+    project_pos.z = a_Position.z * a_Size;
+    project_pos.z += u_raisingHeight;
+
+    if(u_CoordinateSystem == COORDINATE_SYSTEM_LNGLAT || u_CoordinateSystem == COORDINATE_SYSTEM_LNGLAT_OFFSET) {
+      float mapboxZoomScale = 4.0/pow(2.0, 21.0 - u_Zoom);
+      project_pos.z *= mapboxZoomScale;
+      project_pos.z += u_raisingHeight * mapboxZoomScale;
+    }
+  }
+
+  // project_pos.z += 500000.0; // amap1
+
+  // project_pos.z += (500000.0 * 4.0)/pow(2.0, 21.0 - u_Zoom); // mapbox
+  // gl_Position = project_common_position_to_clipspace(vec4(project_pos.xyz, 1.0));
+
+  if(u_CoordinateSystem == COORDINATE_SYSTEM_P20_2) { // gaode2.x
+    // gl_Position = u_Mvp * (vec4(project_pos.xyz * vec3(1.0, 1.0, -1.0), 1.0));
+    gl_Position = u_Mvp * (vec4(project_pos.xyz, 1.0));
+  } else {
+    gl_Position = project_common_position_to_clipspace(vec4(project_pos.xyz, 1.0));
+  }
+
+  float lightWeight = calc_lighting(pos);
+  // v_Color = a_Color;
+  v_Color = vec4(a_Color.rgb * lightWeight, a_Color.w);
+
+  styleMappingMat[3][1] = lightWeight;
+
+  setPickingColor(a_PickingColor);
+}

package/lib/polygon/shaders/extrude/polygon_extrudetex_frag.glsl

@@ -0,0 +1,48 @@
+uniform sampler2D u_texture;
+uniform float u_opacity: 1.0;
+uniform vec4 u_sourceColor;
+uniform vec4 u_targetColor;
+uniform float u_linearColor: 0;
+
+uniform float u_topsurface: 1.0;
+uniform float u_sidesurface: 1.0;
+
+varying vec4 v_Color;
+varying mat4 styleMappingMat; // 传递从片元中传递的映射数据
+#pragma include "picking"
+
+void main() {
+  float opacity = styleMappingMat[0][0];
+  float isSide = styleMappingMat[0][3];
+  float lightWeight = styleMappingMat[3][1];
+  float topU = styleMappingMat[2][2];
+  float topV = styleMappingMat[2][3];
+
+  float sidey = styleMappingMat[3][0];
+  if(isSide < 1.0) {
+    // side face
+    if(u_sidesurface < 1.0) {
+      discard;
+    }
+
+    if(u_linearColor == 1.0) {
+      vec4 linearColor = mix(u_targetColor, u_sourceColor, sidey);
+      linearColor.rgb *= lightWeight;
+      gl_FragColor = linearColor;
+    } else {
+      gl_FragColor = v_Color;
+    }
+  } else {
+
+     // top face
+    if(u_topsurface < 1.0) {
+      discard;
+    }
+
+    gl_FragColor = texture2D(u_texture, vec2(topU, topV));
+  }
+  
+
+  gl_FragColor.a *= opacity;
+  gl_FragColor = filterColor(gl_FragColor);
+}

package/lib/polygon/shaders/extrude/polygon_extrudetex_vert.glsl

@@ -0,0 +1,93 @@
+precision highp float;
+
+#define ambientRatio 0.5
+#define diffuseRatio 0.3
+#define specularRatio 0.2
+
+attribute vec4 a_Color;
+attribute vec3 a_Position;
+attribute vec3 a_Normal;
+attribute float a_Size;
+attribute vec3 a_uvs;
+uniform mat4 u_ModelMatrix;
+uniform mat4 u_Mvp;
+
+varying vec4 v_Color;
+uniform float u_heightfixed: 0.0; // 默认不固定
+uniform float u_raisingHeight: 0.0;
+uniform float u_opacity: 1.0;
+varying mat4 styleMappingMat; // 用于将在顶点着色器中计算好的样式值传递给片元
+
+#pragma include "styleMapping"
+#pragma include "styleMappingCalOpacity"
+
+#pragma include "projection"
+#pragma include "light"
+#pragma include "picking"
+
+void main() {
+  v_Color = a_Color;
+
+  // cal style mapping - 数据纹理映射部分的计算
+  styleMappingMat = mat4(
+    0.0, 0.0, 0.0, 0.0, // opacity - strokeOpacity - strokeWidth - a_Position.z(judge side by a_Position.z)
+    0.0, 0.0, 0.0, 0.0, // strokeR - strokeG - strokeB - strokeA
+    0.0, 0.0, 0.0, 0.0, // offsets[0] - offsets[1] - u - v
+    0.0, 0.0, 0.0, 0.0  // sidey
+  );
+  
+  styleMappingMat[0][3] = a_Position.z;
+  styleMappingMat[2][2] = a_uvs[0];
+  styleMappingMat[2][3] = 1.0 - a_uvs[1];
+  styleMappingMat[3][0] = a_uvs[2];
+
+
+  float rowCount = u_cellTypeLayout[0][0];    // 当前的数据纹理有几行
+  float columnCount = u_cellTypeLayout[0][1]; // 当看到数据纹理有几列
+  float columnWidth = 1.0/columnCount;  // 列宽
+  float rowHeight = 1.0/rowCount;       // 行高
+  float cellCount = calCellCount(); // opacity - strokeOpacity - strokeWidth - stroke - offsets
+  float id = a_vertexId; // 第n个顶点
+  float cellCurrentRow = floor(id * cellCount / columnCount) + 1.0; // 起始点在第几行
+  float cellCurrentColumn = mod(id * cellCount, columnCount) + 1.0; // 起始点在第几列
+  
+  // cell 固定顺序 opacity -> strokeOpacity -> strokeWidth -> stroke ... 
+  // 按顺序从 cell 中取值、若没有则自动往下取值
+  float textureOffset = 0.0; // 在 cell 中取值的偏移量
+
+  vec2 opacityAndOffset = calOpacityAndOffset(cellCurrentRow, cellCurrentColumn, columnCount, textureOffset, columnWidth, rowHeight);
+  styleMappingMat[0][0] = opacityAndOffset.r;
+  textureOffset = opacityAndOffset.g;
+  // cal style mapping - 数据纹理映射部分的计算
+
+  vec4 pos = vec4(a_Position.xy, a_Position.z * a_Size, 1.0);
+  vec4 project_pos = project_position(pos);
+
+  if(u_heightfixed > 0.0) { // 判断几何体是否固定高度
+    project_pos.z = a_Position.z * a_Size;
+    project_pos.z += u_raisingHeight;
+
+    if(u_CoordinateSystem == COORDINATE_SYSTEM_LNGLAT || u_CoordinateSystem == COORDINATE_SYSTEM_LNGLAT_OFFSET) {
+      float mapboxZoomScale = 4.0/pow(2.0, 21.0 - u_Zoom);
+      project_pos.z *= mapboxZoomScale;
+      project_pos.z += u_raisingHeight * mapboxZoomScale;
+    }
+  }
+
+  // project_pos.z += 500000.0; // amap1
+
+  // project_pos.z += (500000.0 * 4.0)/pow(2.0, 21.0 - u_Zoom); // mapbox
+  // gl_Position = project_common_position_to_clipspace(vec4(project_pos.xyz, 1.0));
+
+  if(u_CoordinateSystem == COORDINATE_SYSTEM_P20_2) { // gaode2.x
+    // gl_Position = u_Mvp * (vec4(project_pos.xyz * vec3(1.0, 1.0, -1.0), 1.0));
+    gl_Position = u_Mvp * (vec4(project_pos.xyz, 1.0));
+  } else {
+    gl_Position = project_common_position_to_clipspace(vec4(project_pos.xyz, 1.0));
+  }
+
+  float lightWeight = calc_lighting(pos);
+  styleMappingMat[3][1] = lightWeight;
+
+  setPickingColor(a_PickingColor);
+}

package/lib/polygon/shaders/polygon_frag.glsl

@@ -0,0 +1,12 @@
+uniform float u_opacity: 1.0;
+varying vec4 v_Color;
+varying mat4 styleMappingMat; // 传递从片元中传递的映射数据
+
+#pragma include "picking"
+
+void main() {
+  float opacity = styleMappingMat[0][0];
+  gl_FragColor = v_Color;
+  gl_FragColor.a *= opacity;
+  gl_FragColor = filterColor(gl_FragColor);
+}

package/lib/polygon/shaders/polygon_linear_frag.glsl

@@ -0,0 +1,22 @@
+uniform float u_opacity: 1.0;
+varying vec4 v_Color;
+varying mat4 styleMappingMat; // 传递从片元中传递的映射数据
+
+#pragma include "picking"
+uniform float u_opacitylinear: 0.0;
+uniform float u_dir: 1.0;
+varying vec3 v_linear;
+varying vec2 v_pos;
+
+
+void main() {
+  float opacity = styleMappingMat[0][0];
+  gl_FragColor = v_Color;
+  
+  if(u_opacitylinear > 0.0) {
+    gl_FragColor.a *= u_dir == 1.0 ? 1.0 - length(v_pos - v_linear.xy)/v_linear.z : length(v_pos - v_linear.xy)/v_linear.z;
+  }
+
+  gl_FragColor.a *= opacity;
+  gl_FragColor = filterColor(gl_FragColor);
+}

package/lib/polygon/shaders/polygon_linear_vert.glsl

@@ -0,0 +1,74 @@
+attribute vec4 a_Color;
+attribute vec3 a_Position;
+
+uniform mat4 u_ModelMatrix;
+uniform mat4 u_Mvp;
+uniform float u_opacity: 1.0;
+uniform float u_raisingHeight: 0.0;
+
+varying vec4 v_Color;
+varying mat4 styleMappingMat; // 用于将在顶点着色器中计算好的样式值传递给片元
+
+#pragma include "styleMapping"
+#pragma include "styleMappingCalOpacity"
+
+#pragma include "projection"
+#pragma include "picking"
+
+uniform float u_opacitylinear: 0.0;
+
+attribute vec3 a_linear;
+varying vec3 v_linear;
+varying vec2 v_pos;
+
+void main() {
+  if(u_opacitylinear > 0.0) {
+    v_linear = a_linear;
+    v_pos = a_Position.xy;
+  }
+  
+  // cal style mapping - 数据纹理映射部分的计算
+styleMappingMat = mat4(
+    0.0, 0.0, 0.0, 0.0, // opacity - strokeOpacity - strokeWidth - empty
+    0.0, 0.0, 0.0, 0.0, // strokeR - strokeG - strokeB - strokeA
+    0.0, 0.0, 0.0, 0.0, // offsets[0] - offsets[1]
+    0.0, 0.0, 0.0, 0.0
+  );
+
+  float rowCount = u_cellTypeLayout[0][0];    // 当前的数据纹理有几行
+  float columnCount = u_cellTypeLayout[0][1]; // 当看到数据纹理有几列
+  float columnWidth = 1.0/columnCount;  // 列宽
+  float rowHeight = 1.0/rowCount;       // 行高
+  float cellCount = calCellCount(); // opacity - strokeOpacity - strokeWidth - stroke - offsets
+  float id = a_vertexId; // 第n个顶点
+  float cellCurrentRow = floor(id * cellCount / columnCount) + 1.0; // 起始点在第几行
+  float cellCurrentColumn = mod(id * cellCount, columnCount) + 1.0; // 起始点在第几列
+  
+  // cell 固定顺序 opacity -> strokeOpacity -> strokeWidth -> stroke ... 
+  // 按顺序从 cell 中取值、若没有则自动往下取值
+  float textureOffset = 0.0; // 在 cell 中取值的偏移量
+
+  vec2 opacityAndOffset = calOpacityAndOffset(cellCurrentRow, cellCurrentColumn, columnCount, textureOffset, columnWidth, rowHeight);
+  styleMappingMat[0][0] = opacityAndOffset.r;
+  textureOffset = opacityAndOffset.g;
+  // cal style mapping - 数据纹理映射部分的计算
+
+  v_Color = a_Color;
+  vec4 project_pos = project_position(vec4(a_Position, 1.0));
+  // gl_Position = project_common_position_to_clipspace(vec4(project_pos.xyz, 1.0));
+  project_pos.z += u_raisingHeight;
+
+  if(u_CoordinateSystem == COORDINATE_SYSTEM_LNGLAT || u_CoordinateSystem == COORDINATE_SYSTEM_LNGLAT_OFFSET) {
+    float mapboxZoomScale = 4.0/pow(2.0, 21.0 - u_Zoom);
+    project_pos.z *= mapboxZoomScale;
+    project_pos.z += u_raisingHeight * mapboxZoomScale;
+  }
+
+  if(u_CoordinateSystem == COORDINATE_SYSTEM_P20_2) { // gaode2.x
+    gl_Position = u_Mvp * (vec4(project_pos.xyz, 1.0));
+  } else {
+    gl_Position = project_common_position_to_clipspace(vec4(project_pos.xyz, 1.0));
+  }
+
+  setPickingColor(a_PickingColor);
+}

package/lib/polygon/shaders/polygon_vert.glsl

@@ -0,0 +1,66 @@
+attribute vec4 a_Color;
+attribute vec3 a_Position;
+
+uniform mat4 u_ModelMatrix;
+uniform mat4 u_Mvp;
+
+uniform float u_opacity: 1.0;
+uniform float u_raisingHeight: 0.0;
+
+varying vec4 v_Color;
+varying mat4 styleMappingMat; // 用于将在顶点着色器中计算好的样式值传递给片元
+
+#pragma include "styleMapping"
+#pragma include "styleMappingCalOpacity"
+
+#pragma include "projection"
+#pragma include "picking"
+
+void main() {
+  // cal style mapping - 数据纹理映射部分的计算
+styleMappingMat = mat4(
+    0.0, 0.0, 0.0, 0.0, // opacity - strokeOpacity - strokeWidth - empty
+    0.0, 0.0, 0.0, 0.0, // strokeR - strokeG - strokeB - strokeA
+    0.0, 0.0, 0.0, 0.0, // offsets[0] - offsets[1]
+    0.0, 0.0, 0.0, 0.0
+  );
+
+  float rowCount = u_cellTypeLayout[0][0];    // 当前的数据纹理有几行
+  float columnCount = u_cellTypeLayout[0][1]; // 当看到数据纹理有几列
+  float columnWidth = 1.0/columnCount;  // 列宽
+  float rowHeight = 1.0/rowCount;       // 行高
+  float cellCount = calCellCount(); // opacity - strokeOpacity - strokeWidth - stroke - offsets
+  float id = a_vertexId; // 第n个顶点
+  float cellCurrentRow = floor(id * cellCount / columnCount) + 1.0; // 起始点在第几行
+  float cellCurrentColumn = mod(id * cellCount, columnCount) + 1.0; // 起始点在第几列
+  
+  // cell 固定顺序 opacity -> strokeOpacity -> strokeWidth -> stroke ... 
+  // 按顺序从 cell 中取值、若没有则自动往下取值
+  float textureOffset = 0.0; // 在 cell 中取值的偏移量
+
+  vec2 opacityAndOffset = calOpacityAndOffset(cellCurrentRow, cellCurrentColumn, columnCount, textureOffset, columnWidth, rowHeight);
+  styleMappingMat[0][0] = opacityAndOffset.r;
+  textureOffset = opacityAndOffset.g;
+  // cal style mapping - 数据纹理映射部分的计算
+
+  v_Color = a_Color;
+  vec4 project_pos = project_position(vec4(a_Position, 1.0));
+  // gl_Position = project_common_position_to_clipspace(vec4(project_pos.xyz, 1.0));
+
+  project_pos.z += u_raisingHeight;
+
+  if(u_CoordinateSystem == COORDINATE_SYSTEM_LNGLAT || u_CoordinateSystem == COORDINATE_SYSTEM_LNGLAT_OFFSET) {
+    float mapboxZoomScale = 4.0/pow(2.0, 21.0 - u_Zoom);
+    project_pos.z *= mapboxZoomScale;
+    project_pos.z += u_raisingHeight * mapboxZoomScale;
+  }
+
+  if(u_CoordinateSystem == COORDINATE_SYSTEM_P20_2) { // gaode2.x
+    gl_Position = u_Mvp * (vec4(project_pos.xyz, 1.0));
+  } else {
+    gl_Position = project_common_position_to_clipspace(vec4(project_pos.xyz, 1.0));
+  }
+
+  setPickingColor(a_PickingColor);
+}
+

package/lib/polygon/shaders/tile/polygon_tile_frag.glsl

@@ -0,0 +1,12 @@
+uniform float u_opacity: 1.0;
+varying vec4 v_Color;
+varying mat4 styleMappingMat; // 传递从片元中传递的映射数据
+
+#pragma include "picking"
+
+void main() {
+  float opacity = styleMappingMat[0][0];
+  gl_FragColor = v_Color;
+  gl_FragColor.a *= opacity;
+  gl_FragColor = filterColor(gl_FragColor);
+}

package/lib/polygon/shaders/tile/polygon_tile_vert.glsl

@@ -0,0 +1,82 @@
+attribute vec4 a_Color;
+attribute vec3 a_Position;
+
+uniform mat4 u_ModelMatrix;
+uniform mat4 u_Mvp;
+
+uniform float u_opacity: 1.0;
+
+uniform vec2 u_tileOrigin;
+uniform float u_coord;
+
+varying vec4 v_Color;
+varying mat4 styleMappingMat; // 用于将在顶点着色器中计算好的样式值传递给片元
+
+#pragma include "styleMapping"
+#pragma include "styleMappingCalOpacity"
+
+#pragma include "projection"
+#pragma include "picking"
+
+void main() {
+  // cal style mapping - 数据纹理映射部分的计算
+styleMappingMat = mat4(
+    0.0, 0.0, 0.0, 0.0, // opacity - strokeOpacity - strokeWidth - empty
+    0.0, 0.0, 0.0, 0.0, // strokeR - strokeG - strokeB - strokeA
+    0.0, 0.0, 0.0, 0.0, // offsets[0] - offsets[1]
+    0.0, 0.0, 0.0, 0.0
+  );
+
+  float rowCount = u_cellTypeLayout[0][0];    // 当前的数据纹理有几行
+  float columnCount = u_cellTypeLayout[0][1]; // 当看到数据纹理有几列
+  float columnWidth = 1.0/columnCount;  // 列宽
+  float rowHeight = 1.0/rowCount;       // 行高
+  float cellCount = calCellCount(); // opacity - strokeOpacity - strokeWidth - stroke - offsets
+  float id = a_vertexId; // 第n个顶点
+  float cellCurrentRow = floor(id * cellCount / columnCount) + 1.0; // 起始点在第几行
+  float cellCurrentColumn = mod(id * cellCount, columnCount) + 1.0; // 起始点在第几列
+  
+  // cell 固定顺序 opacity -> strokeOpacity -> strokeWidth -> stroke ... 
+  // 按顺序从 cell 中取值、若没有则自动往下取值
+  float textureOffset = 0.0; // 在 cell 中取值的偏移量
+
+  vec2 opacityAndOffset = calOpacityAndOffset(cellCurrentRow, cellCurrentColumn, columnCount, textureOffset, columnWidth, rowHeight);
+  styleMappingMat[0][0] = opacityAndOffset.r;
+  textureOffset = opacityAndOffset.g;
+  // cal style mapping - 数据纹理映射部分的计算
+
+  v_Color = a_Color;
+  vec4 project_pos = project_position(vec4(a_Position, 1.0));
+
+
+  if(u_CoordinateSystem == COORDINATE_SYSTEM_LNGLAT || u_CoordinateSystem == COORDINATE_SYSTEM_LNGLAT_OFFSET) {
+    float mapboxZoomScale = 4.0/pow(2.0, 21.0 - u_Zoom);
+    project_pos.z *= mapboxZoomScale;
+  }
+
+if(u_coord > 0.0) {
+  if(u_CoordinateSystem == COORDINATE_SYSTEM_P20_2) { // gaode2.x
+    gl_Position = u_Mvp * (vec4(project_pos.xyz, 1.0));
+  } else {
+    gl_Position = project_common_position_to_clipspace(vec4(project_pos.xyz, 1.0));
+  }
+} else {
+    vec2 pointPos = a_Position.xy;
+    vec4 world = vec4(project_mvt_offset_position(vec4(u_tileOrigin, 0.0, 1.0)).xyz, 1.0); // 瓦片起始点的世界坐标
+
+    vec2 pointOffset =  pointPos *  pow(2.0, u_Zoom); // 瓦片内的点的偏移坐标
+    
+    world.xy += pointOffset;
+
+    if (u_CoordinateSystem == COORDINATE_SYSTEM_METER_OFFSET || u_CoordinateSystem == COORDINATE_SYSTEM_LNGLAT_OFFSET) {
+      // Needs to be divided with project_uCommonUnitsPerMeter
+      world.w *= u_PixelsPerMeter.z;
+    }
+
+    gl_Position = u_ViewProjectionMatrix * world + u_ViewportCenterProjection;
+}
+
+
+  setPickingColor(a_PickingColor);
+}
+