trackler 2.2.0.1 → 2.2.0.2

data/tracks/delphi/exercises/poker/README.md

@@ -0,0 +1,33 @@
+# Poker
+
+Pick the best hand(s) from a list of poker hands.
+
+See [wikipedia](https://en.wikipedia.org/wiki/List_of_poker_hands) for an
+overview of poker hands.
+
+## Testing
+
+In order to run the tests for this track, you will need to install
+DUnitX. Please see the [installation](http://www.exercism.io/languages/delphi/installing) instructions for more information.
+
+### Loading Exercises into Delphi
+
+If Delphi is properly installed, and `*.dpr` file types have been associated with Delphi, then double clicking the supplied `*.dpr` file will start Delphi and load the exercise/project.  `control + F9` is the keyboard shortcut to compile the project or pressing `F9` will compile and run the project.
+
+Alternatively you may opt to start Delphi and load your project via. the `File` drop down menu.
+
+### When Questions Come Up
+We monitor the [Pascal-Delphi](https://gitter.im/exercism/Pascal-Delphi) support room on [gitter.im](https://gitter.im) to help you with any questions that might arise.
+
+### Submitting Exercises
+
+Note that, when trying to submit an exercise, make sure the exercise file you're submitting is in the `exercism/delphi/<exerciseName>` directory.
+
+For example, if you're submitting `ubob.pas` for the Bob exercise, the submit command would be something like `exercism submit <path_to_exercism_dir>/delphi/bob/ubob.pas`.
+
+## Source
+
+Inspired by the training course from Udacity. [https://www.udacity.com/course/viewer#!/c-cs212/](https://www.udacity.com/course/viewer#!/c-cs212/)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/delphi/exercises/raindrops/README.md

@@ -0,0 +1,45 @@
+# Raindrops
+
+Convert a number to a string, the contents of which depend on the number's factors.
+
+- If the number has 3 as a factor, output 'Pling'.
+- If the number has 5 as a factor, output 'Plang'.
+- If the number has 7 as a factor, output 'Plong'.
+- If the number does not have 3, 5, or 7 as a factor,
+  just pass the number's digits straight through.
+
+## Examples
+
+- 28's factors are 1, 2, 4, **7**, 14, 28.
+  - In raindrop-speak, this would be a simple "Plong".
+- 30's factors are 1, 2, **3**, **5**, 6, 10, 15, 30.
+  - In raindrop-speak, this would be a "PlingPlang".
+- 34 has four factors: 1, 2, 17, and 34.
+  - In raindrop-speak, this would be "34".
+
+## Testing
+
+In order to run the tests for this track, you will need to install
+DUnitX. Please see the [installation](http://www.exercism.io/languages/delphi/installing) instructions for more information.
+
+### Loading Exercises into Delphi
+
+If Delphi is properly installed, and `*.dpr` file types have been associated with Delphi, then double clicking the supplied `*.dpr` file will start Delphi and load the exercise/project.  `control + F9` is the keyboard shortcut to compile the project or pressing `F9` will compile and run the project.
+
+Alternatively you may opt to start Delphi and load your project via. the `File` drop down menu.
+
+### When Questions Come Up
+We monitor the [Pascal-Delphi](https://gitter.im/exercism/Pascal-Delphi) support room on [gitter.im](https://gitter.im) to help you with any questions that might arise.
+
+### Submitting Exercises
+
+Note that, when trying to submit an exercise, make sure the exercise file you're submitting is in the `exercism/delphi/<exerciseName>` directory.
+
+For example, if you're submitting `ubob.pas` for the Bob exercise, the submit command would be something like `exercism submit <path_to_exercism_dir>/delphi/bob/ubob.pas`.
+
+## Source
+
+A variation on a famous interview question intended to weed out potential candidates. [http://jumpstartlab.com](http://jumpstartlab.com)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/delphi/exercises/rna-transcription/README.md

@@ -0,0 +1,46 @@
+# Rna Transcription
+
+Given a DNA strand, return its RNA complement (per RNA transcription).
+
+Both DNA and RNA strands are a sequence of nucleotides.
+
+The four nucleotides found in DNA are adenine (**A**), cytosine (**C**),
+guanine (**G**) and thymine (**T**).
+
+The four nucleotides found in RNA are adenine (**A**), cytosine (**C**),
+guanine (**G**) and uracil (**U**).
+
+Given a DNA strand, its transcribed RNA strand is formed by replacing
+each nucleotide with its complement:
+
+* `G` -> `C`
+* `C` -> `G`
+* `T` -> `A`
+* `A` -> `U`
+
+## Testing
+
+In order to run the tests for this track, you will need to install
+DUnitX. Please see the [installation](http://www.exercism.io/languages/delphi/installing) instructions for more information.
+
+### Loading Exercises into Delphi
+
+If Delphi is properly installed, and `*.dpr` file types have been associated with Delphi, then double clicking the supplied `*.dpr` file will start Delphi and load the exercise/project.  `control + F9` is the keyboard shortcut to compile the project or pressing `F9` will compile and run the project.
+
+Alternatively you may opt to start Delphi and load your project via. the `File` drop down menu.
+
+### When Questions Come Up
+We monitor the [Pascal-Delphi](https://gitter.im/exercism/Pascal-Delphi) support room on [gitter.im](https://gitter.im) to help you with any questions that might arise.
+
+### Submitting Exercises
+
+Note that, when trying to submit an exercise, make sure the exercise file you're submitting is in the `exercism/delphi/<exerciseName>` directory.
+
+For example, if you're submitting `ubob.pas` for the Bob exercise, the submit command would be something like `exercism submit <path_to_exercism_dir>/delphi/bob/ubob.pas`.
+
+## Source
+
+Rosalind [http://rosalind.info/problems/rna](http://rosalind.info/problems/rna)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/delphi/exercises/roman-numerals/README.md

@@ -0,0 +1,70 @@
+# Roman Numerals
+
+Write a function to convert from normal numbers to Roman Numerals.
+
+The Romans were a clever bunch. They conquered most of Europe and ruled
+it for hundreds of years. They invented concrete and straight roads and
+even bikinis. One thing they never discovered though was the number
+zero. This made writing and dating extensive histories of their exploits
+slightly more challenging, but the system of numbers they came up with
+is still in use today. For example the BBC uses Roman numerals to date
+their programmes.
+
+The Romans wrote numbers using letters - I, V, X, L, C, D, M. (notice
+these letters have lots of straight lines and are hence easy to hack
+into stone tablets).
+
+```
+ 1  => I
+10  => X
+ 7  => VII
+```
+
+There is no need to be able to convert numbers larger than about 3000.
+(The Romans themselves didn't tend to go any higher)
+
+Wikipedia says: Modern Roman numerals ... are written by expressing each
+digit separately starting with the left most digit and skipping any
+digit with a value of zero.
+
+To see this in practice, consider the example of 1990.
+
+In Roman numerals 1990 is MCMXC:
+
+1000=M
+900=CM
+90=XC
+
+2008 is written as MMVIII:
+
+2000=MM
+8=VIII
+
+See also: http://www.novaroma.org/via_romana/numbers.html
+
+## Testing
+
+In order to run the tests for this track, you will need to install
+DUnitX. Please see the [installation](http://www.exercism.io/languages/delphi/installing) instructions for more information.
+
+### Loading Exercises into Delphi
+
+If Delphi is properly installed, and `*.dpr` file types have been associated with Delphi, then double clicking the supplied `*.dpr` file will start Delphi and load the exercise/project.  `control + F9` is the keyboard shortcut to compile the project or pressing `F9` will compile and run the project.
+
+Alternatively you may opt to start Delphi and load your project via. the `File` drop down menu.
+
+### When Questions Come Up
+We monitor the [Pascal-Delphi](https://gitter.im/exercism/Pascal-Delphi) support room on [gitter.im](https://gitter.im) to help you with any questions that might arise.
+
+### Submitting Exercises
+
+Note that, when trying to submit an exercise, make sure the exercise file you're submitting is in the `exercism/delphi/<exerciseName>` directory.
+
+For example, if you're submitting `ubob.pas` for the Bob exercise, the submit command would be something like `exercism submit <path_to_exercism_dir>/delphi/bob/ubob.pas`.
+
+## Source
+
+The Roman Numeral Kata [http://codingdojo.org/cgi-bin/index.pl?KataRomanNumerals](http://codingdojo.org/cgi-bin/index.pl?KataRomanNumerals)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/delphi/exercises/saddle-points/README.md

@@ -0,0 +1,54 @@
+# Saddle Points
+
+Detect saddle points in a matrix.
+
+So say you have a matrix like so:
+
+```plain
+    0  1  2
+  |---------
+0 | 9  8  7
+1 | 5  3  2     <--- saddle point at (1,0)
+2 | 6  6  7
+```
+
+It has a saddle point at (1, 0).
+
+It's called a "saddle point" because it is greater than or equal to
+every element in its row and the less than or equal to every element in
+its column.
+
+A matrix may have zero or more saddle points.
+
+Your code should be able to provide the (possibly empty) list of all the
+saddle points for any given matrix.
+
+Note that you may find other definitions of matrix saddle points online,
+but the tests for this exercise follow the above unambiguous definition.
+
+## Testing
+
+In order to run the tests for this track, you will need to install
+DUnitX. Please see the [installation](http://www.exercism.io/languages/delphi/installing) instructions for more information.
+
+### Loading Exercises into Delphi
+
+If Delphi is properly installed, and `*.dpr` file types have been associated with Delphi, then double clicking the supplied `*.dpr` file will start Delphi and load the exercise/project.  `control + F9` is the keyboard shortcut to compile the project or pressing `F9` will compile and run the project.
+
+Alternatively you may opt to start Delphi and load your project via. the `File` drop down menu.
+
+### When Questions Come Up
+We monitor the [Pascal-Delphi](https://gitter.im/exercism/Pascal-Delphi) support room on [gitter.im](https://gitter.im) to help you with any questions that might arise.
+
+### Submitting Exercises
+
+Note that, when trying to submit an exercise, make sure the exercise file you're submitting is in the `exercism/delphi/<exerciseName>` directory.
+
+For example, if you're submitting `ubob.pas` for the Bob exercise, the submit command would be something like `exercism submit <path_to_exercism_dir>/delphi/bob/ubob.pas`.
+
+## Source
+
+J Dalbey's Programming Practice problems [http://users.csc.calpoly.edu/~jdalbey/103/Projects/ProgrammingPractice.html](http://users.csc.calpoly.edu/~jdalbey/103/Projects/ProgrammingPractice.html)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/delphi/exercises/triangle/README.md

@@ -0,0 +1,47 @@
+# Triangle
+
+Determine if a triangle is equilateral, isosceles, or scalene.
+
+An _equilateral_ triangle has all three sides the same length.<br/>
+An _isosceles_ triangle has at least two sides the same length. (It is sometimes
+specified as having exactly two sides the same length, but for the purposes of
+this exercise we'll say at least two.)<br/>
+A _scalene_ triangle has all sides of different lengths.
+
+## Note
+
+For a shape to be a triangle at all, all sides have to be of length > 0, and 
+the sum of the lengths of any two sides must be greater than or equal to the 
+length of the third side. See [Triangle Inequality](https://en.wikipedia.org/wiki/Triangle_inequality).
+
+## Dig Deeper
+
+The case where the sum of the lengths of two sides _equals_ that of the 
+third is known as a _degenerate_ triangle - it has zero area and looks like 
+a single line. Feel free to add your own code/tests to check for degenerate triangles.
+## Testing
+
+In order to run the tests for this track, you will need to install
+DUnitX. Please see the [installation](http://www.exercism.io/languages/delphi/installing) instructions for more information.
+
+### Loading Exercises into Delphi
+
+If Delphi is properly installed, and `*.dpr` file types have been associated with Delphi, then double clicking the supplied `*.dpr` file will start Delphi and load the exercise/project.  `control + F9` is the keyboard shortcut to compile the project or pressing `F9` will compile and run the project.
+
+Alternatively you may opt to start Delphi and load your project via. the `File` drop down menu.
+
+### When Questions Come Up
+We monitor the [Pascal-Delphi](https://gitter.im/exercism/Pascal-Delphi) support room on [gitter.im](https://gitter.im) to help you with any questions that might arise.
+
+### Submitting Exercises
+
+Note that, when trying to submit an exercise, make sure the exercise file you're submitting is in the `exercism/delphi/<exerciseName>` directory.
+
+For example, if you're submitting `ubob.pas` for the Bob exercise, the submit command would be something like `exercism submit <path_to_exercism_dir>/delphi/bob/ubob.pas`.
+
+## Source
+
+The Ruby Koans triangle project, parts 1 & 2 [http://rubykoans.com](http://rubykoans.com)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/delphi/exercises/two-fer/README.md

@@ -0,0 +1,69 @@
+# Two Fer
+
+`Two-fer` or `2-fer` is short for two for one. One for you and one for me.
+
+```
+"One for X, one for me."
+```
+
+When X is a name or "you".
+
+If the given name is "Alice", the result should be "One for Alice, one for me."
+If no name is given, the result should be "One for you, one for me."
+
+
+## Test-Driven Development
+
+As programmers mature, they eventually want to test their code.
+
+Here at Exercism we simulate [Test-Driven
+Development](http://en.wikipedia.org/wiki/Test-driven_development) (TDD), where
+you write your tests before writing any functionality. The simulation comes in
+the form of a pre-written test suite, which will signal that you have solved
+the problem.
+
+It will also provide you with a safety net to explore other solutions without
+breaking the functionality.
+
+### A typical TDD workflow on Exercism:
+
+1. Run the test file and pick one test that's failing.
+2. Write some code to fix the test you picked.
+3. Re-run the tests to confirm the test is now passing.
+4. Repeat from step 1.
+5. Submit your solution (`exercism submit /path/to/file`)
+
+## Instructions
+
+Submissions are encouraged to be general, within reason. Having said that, it's
+also important not to over-engineer a solution.
+
+It's important to remember that the goal is to make code as expressive and
+readable as we can.
+
+## Testing
+
+In order to run the tests for this track, you will need to install
+DUnitX. Please see the [installation](http://www.exercism.io/languages/delphi/installing) instructions for more information.
+
+### Loading Exercises into Delphi
+
+If Delphi is properly installed, and `*.dpr` file types have been associated with Delphi, then double clicking the supplied `*.dpr` file will start Delphi and load the exercise/project.  `control + F9` is the keyboard shortcut to compile the project or pressing `F9` will compile and run the project.
+
+Alternatively you may opt to start Delphi and load your project via. the `File` drop down menu.
+
+### When Questions Come Up
+We monitor the [Pascal-Delphi](https://gitter.im/exercism/Pascal-Delphi) support room on [gitter.im](https://gitter.im) to help you with any questions that might arise.
+
+### Submitting Exercises
+
+Note that, when trying to submit an exercise, make sure the exercise file you're submitting is in the `exercism/delphi/<exerciseName>` directory.
+
+For example, if you're submitting `ubob.pas` for the Bob exercise, the submit command would be something like `exercism submit <path_to_exercism_dir>/delphi/bob/ubob.pas`.
+
+## Source
+
+This is an exercise to introduce users to basic programming constructs, just after hello World. [https://en.wikipedia.org/wiki/Two-fer](https://en.wikipedia.org/wiki/Two-fer)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/delphi/exercises/wordy/README.md

@@ -0,0 +1,84 @@
+# Wordy
+
+Parse and evaluate simple math word problems returning the answer as an integer.
+
+
+## Iteration 1 — Addition
+
+Add two numbers together.
+
+> What is 5 plus 13?
+
+Evaluates to 18.
+
+Handle large numbers and negative numbers.
+
+
+## Iteration 2 — Subtraction, Multiplication and Division
+
+Now, perform the other three operations.
+
+> What is 7 minus 5?
+
+2
+
+> What is 6 multiplied by 4?
+
+24
+
+> What is 25 divided by 5?
+
+5
+
+
+## Iteration 3 — Multiple Operations
+
+Handle a set of operations, in sequence.
+
+Since these are verbal word problems, evaluate the expression from
+left-to-right, _ignoring the typical order of operations._
+
+> What is 5 plus 13 plus 6?
+
+24
+
+> What is 3 plus 2 multiplied by 3?
+
+15  (i.e. not 9)
+
+
+## Bonus — Exponentials
+
+If you'd like, handle exponentials.
+
+> What is 2 raised to the 5th power?
+
+32
+
+
+## Testing
+
+In order to run the tests for this track, you will need to install
+DUnitX. Please see the [installation](http://www.exercism.io/languages/delphi/installing) instructions for more information.
+
+### Loading Exercises into Delphi
+
+If Delphi is properly installed, and `*.dpr` file types have been associated with Delphi, then double clicking the supplied `*.dpr` file will start Delphi and load the exercise/project.  `control + F9` is the keyboard shortcut to compile the project or pressing `F9` will compile and run the project.
+
+Alternatively you may opt to start Delphi and load your project via. the `File` drop down menu.
+
+### When Questions Come Up
+We monitor the [Pascal-Delphi](https://gitter.im/exercism/Pascal-Delphi) support room on [gitter.im](https://gitter.im) to help you with any questions that might arise.
+
+### Submitting Exercises
+
+Note that, when trying to submit an exercise, make sure the exercise file you're submitting is in the `exercism/delphi/<exerciseName>` directory.
+
+For example, if you're submitting `ubob.pas` for the Bob exercise, the submit command would be something like `exercism submit <path_to_exercism_dir>/delphi/bob/ubob.pas`.
+
+## Source
+
+Inspired by one of the generated questions in the Extreme Startup game. [https://github.com/rchatley/extreme_startup](https://github.com/rchatley/extreme_startup)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/{java/exercises/all-your-base/.meta/readme.go.tmpl → factor/config/exercise_readme.go.tmpl}

@@ -14,4 +14,3 @@
 {{ end }}
 ## Submitting Incomplete Solutions
 It's possible to submit an incomplete solution so you can see how others have completed the exercise.
-

data/tracks/factor/exercises/hello-world/README.md

@@ -0,0 +1,34 @@
+# Hello World
+
+The classical introductory exercise. Just say "Hello, World!".
+
+["Hello, World!"](http://en.wikipedia.org/wiki/%22Hello,_world!%22_program) is
+the traditional first program for beginning programming in a new language
+or environment.
+
+The objectives are simple:
+
+- Write a function that returns the string "Hello, World!".
+- Run the test suite and make sure that it succeeds.
+- Submit your solution and check it at the website.
+
+If everything goes well, you will be ready to fetch your first real exercise.
+
+## Testing Exercises
+
+If you followed the [installation instructions](http://exercism.io/languages/factor/installing), just run the provided test suite against your implementation with `"exercise-name" test`.
+
+## Submitting Exercises
+
+Note that, when trying to submit an exercise, make sure the solution is in the `exercism/factor/exercise-name` directory.
+
+For example, if you're submitting `bob.factor` for the Bob exercise, the submit command would be something like `exercism submit exercism/factor/bob/bob.factor`.
+
+For more detailed information about running tests, code style and linting,
+please see the [help page](http://exercism.io/languages/factor).
+## Source
+
+This is an exercise to introduce users to using Exercism [http://en.wikipedia.org/wiki/%22Hello,_world!%22_program](http://en.wikipedia.org/wiki/%22Hello,_world!%22_program)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/factor/exercises/isogram/README.md

@@ -0,0 +1,32 @@
+# Isogram
+
+Determine if a word or phrase is an isogram.
+
+An isogram (also known as a "nonpattern word") is a word or phrase without a repeating letter.
+
+Examples of isograms:
+
+- lumberjacks
+- background
+- downstream
+
+The word *isograms*, however, is not an isogram, because the s repeats.
+
+## Testing Exercises
+
+If you followed the [installation instructions](http://exercism.io/languages/factor/installing), just run the provided test suite against your implementation with `"exercise-name" test`.
+
+## Submitting Exercises
+
+Note that, when trying to submit an exercise, make sure the solution is in the `exercism/factor/exercise-name` directory.
+
+For example, if you're submitting `bob.factor` for the Bob exercise, the submit command would be something like `exercism submit exercism/factor/bob/bob.factor`.
+
+For more detailed information about running tests, code style and linting,
+please see the [help page](http://exercism.io/languages/factor).
+## Source
+
+Wikipedia [https://en.wikipedia.org/wiki/Isogram](https://en.wikipedia.org/wiki/Isogram)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/factor/exercises/leap/README.md

@@ -0,0 +1,46 @@
+# Leap
+
+Given a year, report if it is a leap year.
+
+The tricky thing here is that a leap year in the Gregorian calendar occurs:
+
+```plain
+on every year that is evenly divisible by 4
+  except every year that is evenly divisible by 100
+    unless the year is also evenly divisible by 400
+```
+
+For example, 1997 is not a leap year, but 1996 is.  1900 is not a leap
+year, but 2000 is.
+
+If your language provides a method in the standard library that does
+this look-up, pretend it doesn't exist and implement it yourself.
+
+## Notes
+
+Though our exercise adopts some very simple rules, there is more to
+learn!
+
+For a delightful, four minute explanation of the whole leap year
+phenomenon, go watch [this youtube video][video].
+
+[video]: http://www.youtube.com/watch?v=xX96xng7sAE
+
+## Testing Exercises
+
+If you followed the [installation instructions](http://exercism.io/languages/factor/installing), just run the provided test suite against your implementation with `"exercise-name" test`.
+
+## Submitting Exercises
+
+Note that, when trying to submit an exercise, make sure the solution is in the `exercism/factor/exercise-name` directory.
+
+For example, if you're submitting `bob.factor` for the Bob exercise, the submit command would be something like `exercism submit exercism/factor/bob/bob.factor`.
+
+For more detailed information about running tests, code style and linting,
+please see the [help page](http://exercism.io/languages/factor).
+## Source
+
+JavaRanch Cattle Drive, exercise 3 [http://www.javaranch.com/leap.jsp](http://www.javaranch.com/leap.jsp)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/factor/exercises/two-fer/README.md

@@ -0,0 +1,61 @@
+# Two Fer
+
+`Two-fer` or `2-fer` is short for two for one. One for you and one for me.
+
+```
+"One for X, one for me."
+```
+
+When X is a name or "you".
+
+If the given name is "Alice", the result should be "One for Alice, one for me."
+If no name is given, the result should be "One for you, one for me."
+
+
+## Test-Driven Development
+
+As programmers mature, they eventually want to test their code.
+
+Here at Exercism we simulate [Test-Driven
+Development](http://en.wikipedia.org/wiki/Test-driven_development) (TDD), where
+you write your tests before writing any functionality. The simulation comes in
+the form of a pre-written test suite, which will signal that you have solved
+the problem.
+
+It will also provide you with a safety net to explore other solutions without
+breaking the functionality.
+
+### A typical TDD workflow on Exercism:
+
+1. Run the test file and pick one test that's failing.
+2. Write some code to fix the test you picked.
+3. Re-run the tests to confirm the test is now passing.
+4. Repeat from step 1.
+5. Submit your solution (`exercism submit /path/to/file`)
+
+## Instructions
+
+Submissions are encouraged to be general, within reason. Having said that, it's
+also important not to over-engineer a solution.
+
+It's important to remember that the goal is to make code as expressive and
+readable as we can.
+
+## Testing Exercises
+
+If you followed the [installation instructions](http://exercism.io/languages/factor/installing), just run the provided test suite against your implementation with `"exercise-name" test`.
+
+## Submitting Exercises
+
+Note that, when trying to submit an exercise, make sure the solution is in the `exercism/factor/exercise-name` directory.
+
+For example, if you're submitting `bob.factor` for the Bob exercise, the submit command would be something like `exercism submit exercism/factor/bob/bob.factor`.
+
+For more detailed information about running tests, code style and linting,
+please see the [help page](http://exercism.io/languages/factor).
+## Source
+
+This is an exercise to introduce users to basic programming constructs, just after hello World. [https://en.wikipedia.org/wiki/Two-fer](https://en.wikipedia.org/wiki/Two-fer)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/haskell/config/exercise_readme.go.tmpl

@@ -0,0 +1,16 @@
+# {{ .Spec.Name }}
+
+{{ .Spec.Description -}}
+{{- with .Hints }}
+{{ . }}
+{{ end }}
+{{- with .TrackInsert }}
+{{ . }}
+{{ end }}
+{{- with .Spec.Credits -}}
+## Source
+
+{{ . }}
+{{ end }}
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.