trackler 2.2.0.1 → 2.2.0.2

data/tracks/delphi/exercises/circular-buffer/README.md

@@ -0,0 +1,71 @@
+# Circular Buffer
+
+A circular buffer, cyclic buffer or ring buffer is a data structure that
+uses a single, fixed-size buffer as if it were connected end-to-end.
+
+A circular buffer first starts empty and of some predefined length. For
+example, this is a 7-element buffer:
+
+    [ ][ ][ ][ ][ ][ ][ ]
+
+Assume that a 1 is written into the middle of the buffer (exact starting
+location does not matter in a circular buffer):
+
+    [ ][ ][ ][1][ ][ ][ ]
+
+Then assume that two more elements are added — 2 & 3 — which get
+appended after the 1:
+
+    [ ][ ][ ][1][2][3][ ]
+
+If two elements are then removed from the buffer, the oldest values
+inside the buffer are removed. The two elements removed, in this case,
+are 1 & 2, leaving the buffer with just a 3:
+
+    [ ][ ][ ][ ][ ][3][ ]
+
+If the buffer has 7 elements then it is completely full:
+
+    [6][7][8][9][3][4][5]
+
+When the buffer is full an error will be raised, alerting the client
+that further writes are blocked until a slot becomes free.
+
+The client can opt to overwrite the oldest data with a forced write. In
+this case, two more elements — A & B — are added and they overwrite the
+3 & 4:
+
+    [6][7][8][9][A][B][5]
+
+Finally, if two elements are now removed then what would be returned is
+not 3 & 4 but 5 & 6 because A & B overwrote the 3 & the 4 yielding the
+buffer with:
+
+    [ ][7][8][9][A][B][ ]
+
+## Testing
+
+In order to run the tests for this track, you will need to install
+DUnitX. Please see the [installation](http://www.exercism.io/languages/delphi/installing) instructions for more information.
+
+### Loading Exercises into Delphi
+
+If Delphi is properly installed, and `*.dpr` file types have been associated with Delphi, then double clicking the supplied `*.dpr` file will start Delphi and load the exercise/project.  `control + F9` is the keyboard shortcut to compile the project or pressing `F9` will compile and run the project.
+
+Alternatively you may opt to start Delphi and load your project via. the `File` drop down menu.
+
+### When Questions Come Up
+We monitor the [Pascal-Delphi](https://gitter.im/exercism/Pascal-Delphi) support room on [gitter.im](https://gitter.im) to help you with any questions that might arise.
+
+### Submitting Exercises
+
+Note that, when trying to submit an exercise, make sure the exercise file you're submitting is in the `exercism/delphi/<exerciseName>` directory.
+
+For example, if you're submitting `ubob.pas` for the Bob exercise, the submit command would be something like `exercism submit <path_to_exercism_dir>/delphi/bob/ubob.pas`.
+
+## Source
+
+Wikipedia [http://en.wikipedia.org/wiki/Circular_buffer](http://en.wikipedia.org/wiki/Circular_buffer)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/delphi/exercises/clock/README.md

@@ -0,0 +1,34 @@
+# Clock
+
+Implement a clock that handles times without dates.
+
+You should be able to add and subtract minutes to it.
+
+Two clocks that represent the same time should be equal to each other.
+
+## Testing
+
+In order to run the tests for this track, you will need to install
+DUnitX. Please see the [installation](http://www.exercism.io/languages/delphi/installing) instructions for more information.
+
+### Loading Exercises into Delphi
+
+If Delphi is properly installed, and `*.dpr` file types have been associated with Delphi, then double clicking the supplied `*.dpr` file will start Delphi and load the exercise/project.  `control + F9` is the keyboard shortcut to compile the project or pressing `F9` will compile and run the project.
+
+Alternatively you may opt to start Delphi and load your project via. the `File` drop down menu.
+
+### When Questions Come Up
+We monitor the [Pascal-Delphi](https://gitter.im/exercism/Pascal-Delphi) support room on [gitter.im](https://gitter.im) to help you with any questions that might arise.
+
+### Submitting Exercises
+
+Note that, when trying to submit an exercise, make sure the exercise file you're submitting is in the `exercism/delphi/<exerciseName>` directory.
+
+For example, if you're submitting `ubob.pas` for the Bob exercise, the submit command would be something like `exercism submit <path_to_exercism_dir>/delphi/bob/ubob.pas`.
+
+## Source
+
+Pairing session with Erin Drummond [https://twitter.com/ebdrummond](https://twitter.com/ebdrummond)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/delphi/exercises/collatz-conjecture/README.md

@@ -0,0 +1,54 @@
+# Collatz Conjecture
+
+The Collatz Conjecture or 3x+1 problem can be summarized as follows:
+
+Take any positive integer n. If n is even, divide n by 2 to get n / 2. If n is
+odd, multiply n by 3 and add 1 to get 3n + 1. Repeat the process indefinitely.
+The conjecture states that no matter which number you start with, you will
+always reach 1 eventually.
+
+Given a number n, return the number of steps required to reach 1.
+
+## Examples
+Starting with n = 12, the steps would be as follows:
+
+0. 12
+1. 6
+2. 3
+3. 10
+4. 5
+5. 16
+6. 8
+7. 4
+8. 2
+9. 1
+
+Resulting in 9 steps. So for input n = 12, the return value would be 9.
+
+
+## Testing
+
+In order to run the tests for this track, you will need to install
+DUnitX. Please see the [installation](http://www.exercism.io/languages/delphi/installing) instructions for more information.
+
+### Loading Exercises into Delphi
+
+If Delphi is properly installed, and `*.dpr` file types have been associated with Delphi, then double clicking the supplied `*.dpr` file will start Delphi and load the exercise/project.  `control + F9` is the keyboard shortcut to compile the project or pressing `F9` will compile and run the project.
+
+Alternatively you may opt to start Delphi and load your project via. the `File` drop down menu.
+
+### When Questions Come Up
+We monitor the [Pascal-Delphi](https://gitter.im/exercism/Pascal-Delphi) support room on [gitter.im](https://gitter.im) to help you with any questions that might arise.
+
+### Submitting Exercises
+
+Note that, when trying to submit an exercise, make sure the exercise file you're submitting is in the `exercism/delphi/<exerciseName>` directory.
+
+For example, if you're submitting `ubob.pas` for the Bob exercise, the submit command would be something like `exercism submit <path_to_exercism_dir>/delphi/bob/ubob.pas`.
+
+## Source
+
+An unsolved problem in mathematics named after mathematician Lothar Collatz [https://en.wikipedia.org/wiki/3x_%2B_1_problem](https://en.wikipedia.org/wiki/3x_%2B_1_problem)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/delphi/exercises/etl/README.md

@@ -0,0 +1,72 @@
+# Etl
+
+We are going to do the `Transform` step of an Extract-Transform-Load.
+
+### ETL
+Extract-Transform-Load (ETL) is a fancy way of saying, "We have some crufty, legacy data over in this system, and now we need it in this shiny new system over here, so
+we're going to migrate this."
+
+(Typically, this is followed by, "We're only going to need to run this
+once." That's then typically followed by much forehead slapping and
+moaning about how stupid we could possibly be.)
+
+### The goal
+We're going to extract some scrabble scores from a legacy system.
+
+The old system stored a list of letters per score:
+
+- 1 point: "A", "E", "I", "O", "U", "L", "N", "R", "S", "T",
+- 2 points: "D", "G",
+- 3 points: "B", "C", "M", "P",
+- 4 points: "F", "H", "V", "W", "Y",
+- 5 points: "K",
+- 8 points: "J", "X",
+- 10 points: "Q", "Z",
+
+The shiny new scrabble system instead stores the score per letter, which
+makes it much faster and easier to calculate the score for a word. It
+also stores the letters in lower-case regardless of the case of the
+input letters:
+
+- "a" is worth 1 point.
+- "b" is worth 3 points.
+- "c" is worth 3 points.
+- "d" is worth 2 points.
+- Etc.
+
+Your mission, should you choose to accept it, is to transform the legacy data
+format to the shiny new format.
+
+### Notes
+
+A final note about scoring, Scrabble is played around the world in a
+variety of languages, each with its own unique scoring table. For
+example, an "E" is scored at 2 in the Māori-language version of the
+game while being scored at 4 in the Hawaiian-language version.
+
+## Testing
+
+In order to run the tests for this track, you will need to install
+DUnitX. Please see the [installation](http://www.exercism.io/languages/delphi/installing) instructions for more information.
+
+### Loading Exercises into Delphi
+
+If Delphi is properly installed, and `*.dpr` file types have been associated with Delphi, then double clicking the supplied `*.dpr` file will start Delphi and load the exercise/project.  `control + F9` is the keyboard shortcut to compile the project or pressing `F9` will compile and run the project.
+
+Alternatively you may opt to start Delphi and load your project via. the `File` drop down menu.
+
+### When Questions Come Up
+We monitor the [Pascal-Delphi](https://gitter.im/exercism/Pascal-Delphi) support room on [gitter.im](https://gitter.im) to help you with any questions that might arise.
+
+### Submitting Exercises
+
+Note that, when trying to submit an exercise, make sure the exercise file you're submitting is in the `exercism/delphi/<exerciseName>` directory.
+
+For example, if you're submitting `ubob.pas` for the Bob exercise, the submit command would be something like `exercism submit <path_to_exercism_dir>/delphi/bob/ubob.pas`.
+
+## Source
+
+The Jumpstart Lab team [http://jumpstartlab.com](http://jumpstartlab.com)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/delphi/exercises/grains/README.md

@@ -0,0 +1,55 @@
+# Grains
+
+Calculate the number of grains of wheat on a chessboard given that the number
+on each square doubles.
+
+There once was a wise servant who saved the life of a prince. The king
+promised to pay whatever the servant could dream up. Knowing that the
+king loved chess, the servant told the king he would like to have grains
+of wheat. One grain on the first square of a chess board. Two grains on
+the next. Four on the third, and so on.
+
+There are 64 squares on a chessboard.
+
+Write code that shows:
+- how many grains were on each square, and
+- the total number of grains
+
+
+## For bonus points
+
+Did you get the tests passing and the code clean? If you want to, these
+are some additional things you could try:
+
+- Optimize for speed.
+- Optimize for readability.
+
+Then please share your thoughts in a comment on the submission. Did this
+experiment make the code better? Worse? Did you learn anything from it?
+
+## Testing
+
+In order to run the tests for this track, you will need to install
+DUnitX. Please see the [installation](http://www.exercism.io/languages/delphi/installing) instructions for more information.
+
+### Loading Exercises into Delphi
+
+If Delphi is properly installed, and `*.dpr` file types have been associated with Delphi, then double clicking the supplied `*.dpr` file will start Delphi and load the exercise/project.  `control + F9` is the keyboard shortcut to compile the project or pressing `F9` will compile and run the project.
+
+Alternatively you may opt to start Delphi and load your project via. the `File` drop down menu.
+
+### When Questions Come Up
+We monitor the [Pascal-Delphi](https://gitter.im/exercism/Pascal-Delphi) support room on [gitter.im](https://gitter.im) to help you with any questions that might arise.
+
+### Submitting Exercises
+
+Note that, when trying to submit an exercise, make sure the exercise file you're submitting is in the `exercism/delphi/<exerciseName>` directory.
+
+For example, if you're submitting `ubob.pas` for the Bob exercise, the submit command would be something like `exercism submit <path_to_exercism_dir>/delphi/bob/ubob.pas`.
+
+## Source
+
+JavaRanch Cattle Drive, exercise 6 [http://www.javaranch.com/grains.jsp](http://www.javaranch.com/grains.jsp)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/delphi/exercises/hamming/README.md

@@ -0,0 +1,63 @@
+# Hamming
+
+Calculate the Hamming difference between two DNA strands.
+
+A mutation is simply a mistake that occurs during the creation or
+copying of a nucleic acid, in particular DNA. Because nucleic acids are
+vital to cellular functions, mutations tend to cause a ripple effect
+throughout the cell. Although mutations are technically mistakes, a very
+rare mutation may equip the cell with a beneficial attribute. In fact,
+the macro effects of evolution are attributable by the accumulated
+result of beneficial microscopic mutations over many generations.
+
+The simplest and most common type of nucleic acid mutation is a point
+mutation, which replaces one base with another at a single nucleotide.
+
+By counting the number of differences between two homologous DNA strands
+taken from different genomes with a common ancestor, we get a measure of
+the minimum number of point mutations that could have occurred on the
+evolutionary path between the two strands.
+
+This is called the 'Hamming distance'.
+
+It is found by comparing two DNA strands and counting how many of the
+nucleotides are different from their equivalent in the other string.
+
+    GAGCCTACTAACGGGAT
+    CATCGTAATGACGGCCT
+    ^ ^ ^  ^ ^    ^^
+
+The Hamming distance between these two DNA strands is 7.
+
+# Implementation notes
+
+The Hamming distance is only defined for sequences of equal length. This means
+that based on the definition, each language could deal with getting sequences
+of equal length differently.
+
+## Testing
+
+In order to run the tests for this track, you will need to install
+DUnitX. Please see the [installation](http://www.exercism.io/languages/delphi/installing) instructions for more information.
+
+### Loading Exercises into Delphi
+
+If Delphi is properly installed, and `*.dpr` file types have been associated with Delphi, then double clicking the supplied `*.dpr` file will start Delphi and load the exercise/project.  `control + F9` is the keyboard shortcut to compile the project or pressing `F9` will compile and run the project.
+
+Alternatively you may opt to start Delphi and load your project via. the `File` drop down menu.
+
+### When Questions Come Up
+We monitor the [Pascal-Delphi](https://gitter.im/exercism/Pascal-Delphi) support room on [gitter.im](https://gitter.im) to help you with any questions that might arise.
+
+### Submitting Exercises
+
+Note that, when trying to submit an exercise, make sure the exercise file you're submitting is in the `exercism/delphi/<exerciseName>` directory.
+
+For example, if you're submitting `ubob.pas` for the Bob exercise, the submit command would be something like `exercism submit <path_to_exercism_dir>/delphi/bob/ubob.pas`.
+
+## Source
+
+The Calculating Point Mutations problem at Rosalind [http://rosalind.info/problems/hamm/](http://rosalind.info/problems/hamm/)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/delphi/exercises/hello-world/README.md

@@ -0,0 +1,42 @@
+# Hello World
+
+The classical introductory exercise. Just say "Hello, World!".
+
+["Hello, World!"](http://en.wikipedia.org/wiki/%22Hello,_world!%22_program) is
+the traditional first program for beginning programming in a new language
+or environment.
+
+The objectives are simple:
+
+- Write a function that returns the string "Hello, World!".
+- Run the test suite and make sure that it succeeds.
+- Submit your solution and check it at the website.
+
+If everything goes well, you will be ready to fetch your first real exercise.
+
+## Testing
+
+In order to run the tests for this track, you will need to install
+DUnitX. Please see the [installation](http://www.exercism.io/languages/delphi/installing) instructions for more information.
+
+### Loading Exercises into Delphi
+
+If Delphi is properly installed, and `*.dpr` file types have been associated with Delphi, then double clicking the supplied `*.dpr` file will start Delphi and load the exercise/project.  `control + F9` is the keyboard shortcut to compile the project or pressing `F9` will compile and run the project.
+
+Alternatively you may opt to start Delphi and load your project via. the `File` drop down menu.
+
+### When Questions Come Up
+We monitor the [Pascal-Delphi](https://gitter.im/exercism/Pascal-Delphi) support room on [gitter.im](https://gitter.im) to help you with any questions that might arise.
+
+### Submitting Exercises
+
+Note that, when trying to submit an exercise, make sure the exercise file you're submitting is in the `exercism/delphi/<exerciseName>` directory.
+
+For example, if you're submitting `ubob.pas` for the Bob exercise, the submit command would be something like `exercism submit <path_to_exercism_dir>/delphi/bob/ubob.pas`.
+
+## Source
+
+This is an exercise to introduce users to using Exercism [http://en.wikipedia.org/wiki/%22Hello,_world!%22_program](http://en.wikipedia.org/wiki/%22Hello,_world!%22_program)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/delphi/exercises/leap/README.md

@@ -0,0 +1,54 @@
+# Leap
+
+Given a year, report if it is a leap year.
+
+The tricky thing here is that a leap year in the Gregorian calendar occurs:
+
+```plain
+on every year that is evenly divisible by 4
+  except every year that is evenly divisible by 100
+    unless the year is also evenly divisible by 400
+```
+
+For example, 1997 is not a leap year, but 1996 is.  1900 is not a leap
+year, but 2000 is.
+
+If your language provides a method in the standard library that does
+this look-up, pretend it doesn't exist and implement it yourself.
+
+## Notes
+
+Though our exercise adopts some very simple rules, there is more to
+learn!
+
+For a delightful, four minute explanation of the whole leap year
+phenomenon, go watch [this youtube video][video].
+
+[video]: http://www.youtube.com/watch?v=xX96xng7sAE
+
+## Testing
+
+In order to run the tests for this track, you will need to install
+DUnitX. Please see the [installation](http://www.exercism.io/languages/delphi/installing) instructions for more information.
+
+### Loading Exercises into Delphi
+
+If Delphi is properly installed, and `*.dpr` file types have been associated with Delphi, then double clicking the supplied `*.dpr` file will start Delphi and load the exercise/project.  `control + F9` is the keyboard shortcut to compile the project or pressing `F9` will compile and run the project.
+
+Alternatively you may opt to start Delphi and load your project via. the `File` drop down menu.
+
+### When Questions Come Up
+We monitor the [Pascal-Delphi](https://gitter.im/exercism/Pascal-Delphi) support room on [gitter.im](https://gitter.im) to help you with any questions that might arise.
+
+### Submitting Exercises
+
+Note that, when trying to submit an exercise, make sure the exercise file you're submitting is in the `exercism/delphi/<exerciseName>` directory.
+
+For example, if you're submitting `ubob.pas` for the Bob exercise, the submit command would be something like `exercism submit <path_to_exercism_dir>/delphi/bob/ubob.pas`.
+
+## Source
+
+JavaRanch Cattle Drive, exercise 3 [http://www.javaranch.com/leap.jsp](http://www.javaranch.com/leap.jsp)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/delphi/exercises/minesweeper/README.md

@@ -0,0 +1,51 @@
+# Minesweeper
+
+Add the numbers to a minesweeper board.
+
+Minesweeper is a popular game where the user has to find the mines using
+numeric hints that indicate how many mines are directly adjacent
+(horizontally, vertically, diagonally) to a square.
+
+In this exercise you have to create some code that counts the number of
+mines adjacent to a square and transforms boards like this (where `*`
+indicates a mine):
+
+    +-----+
+    | * * |
+    |  *  |
+    |  *  |
+    |     |
+    +-----+
+
+into this:
+
+    +-----+
+    |1*3*1|
+    |13*31|
+    | 2*2 |
+    | 111 |
+    +-----+
+
+## Testing
+
+In order to run the tests for this track, you will need to install
+DUnitX. Please see the [installation](http://www.exercism.io/languages/delphi/installing) instructions for more information.
+
+### Loading Exercises into Delphi
+
+If Delphi is properly installed, and `*.dpr` file types have been associated with Delphi, then double clicking the supplied `*.dpr` file will start Delphi and load the exercise/project.  `control + F9` is the keyboard shortcut to compile the project or pressing `F9` will compile and run the project.
+
+Alternatively you may opt to start Delphi and load your project via. the `File` drop down menu.
+
+### When Questions Come Up
+We monitor the [Pascal-Delphi](https://gitter.im/exercism/Pascal-Delphi) support room on [gitter.im](https://gitter.im) to help you with any questions that might arise.
+
+### Submitting Exercises
+
+Note that, when trying to submit an exercise, make sure the exercise file you're submitting is in the `exercism/delphi/<exerciseName>` directory.
+
+For example, if you're submitting `ubob.pas` for the Bob exercise, the submit command would be something like `exercism submit <path_to_exercism_dir>/delphi/bob/ubob.pas`.
+
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/delphi/exercises/nucleotide-count/README.md

@@ -0,0 +1,54 @@
+# Nucleotide Count
+
+Given a DNA string, compute how many times each nucleotide occurs in the string.
+
+DNA is represented by an alphabet of the following symbols: 'A', 'C',
+'G', and 'T'.
+
+Each symbol represents a nucleotide, which is a fancy name for the
+particular molecules that happen to make up a large part of DNA.
+
+Shortest intro to biochemistry EVAR:
+
+- twigs are to birds nests as
+- nucleotides are to DNA and RNA as
+- amino acids are to proteins as
+- sugar is to starch as
+- oh crap lipids
+
+I'm not going to talk about lipids because they're crazy complex.
+
+So back to nucleotides.
+
+DNA contains four types of them: adenine (`A`), cytosine (`C`), guanine
+(`G`), and thymine (`T`).
+
+RNA contains a slightly different set of nucleotides, but we don't care
+about that for now.
+
+## Testing
+
+In order to run the tests for this track, you will need to install
+DUnitX. Please see the [installation](http://www.exercism.io/languages/delphi/installing) instructions for more information.
+
+### Loading Exercises into Delphi
+
+If Delphi is properly installed, and `*.dpr` file types have been associated with Delphi, then double clicking the supplied `*.dpr` file will start Delphi and load the exercise/project.  `control + F9` is the keyboard shortcut to compile the project or pressing `F9` will compile and run the project.
+
+Alternatively you may opt to start Delphi and load your project via. the `File` drop down menu.
+
+### When Questions Come Up
+We monitor the [Pascal-Delphi](https://gitter.im/exercism/Pascal-Delphi) support room on [gitter.im](https://gitter.im) to help you with any questions that might arise.
+
+### Submitting Exercises
+
+Note that, when trying to submit an exercise, make sure the exercise file you're submitting is in the `exercism/delphi/<exerciseName>` directory.
+
+For example, if you're submitting `ubob.pas` for the Bob exercise, the submit command would be something like `exercism submit <path_to_exercism_dir>/delphi/bob/ubob.pas`.
+
+## Source
+
+The Calculating DNA Nucleotides_problem at Rosalind [http://rosalind.info/problems/dna/](http://rosalind.info/problems/dna/)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/delphi/exercises/perfect-numbers/README.md

@@ -0,0 +1,45 @@
+# Perfect Numbers
+
+Determine if a number is perfect, abundant, or deficient based on
+Nicomachus' (60 - 120 CE) classification scheme for natural numbers.
+
+The Greek mathematician [Nicomachus](https://en.wikipedia.org/wiki/Nicomachus) devised a classification scheme for natural numbers, identifying each as belonging uniquely to the categories of **perfect**, **abundant**, or **deficient** based on their [aliquot sum](https://en.wikipedia.org/wiki/Aliquot_sum). The aliquot sum is defined as the sum of the factors of a number not including the number itself. For example, the aliquot sum of 15 is (1 + 3 + 5) = 9
+
+- **Perfect**: aliquot sum = number 
+  - 6 is a perfect number because (1 + 2 + 3) = 6
+  - 28 is a perfect number because (1 + 2 + 4 + 7 + 14) = 28
+- **Abundant**: aliquot sum > number
+  - 12 is an abundant number because (1 + 2 + 3 + 4 + 6) = 16
+  - 24 is an abundant number because (1 + 2 + 3 + 4 + 6 + 8 + 12) = 36
+- **Deficient**: aliquot sum < number
+  - 8 is a deficient number because (1 + 2 + 4) = 7
+  - Prime numbers are deficient
+  
+Implement a way to determine whether a given number is **perfect**. Depending on your language track, you may also need to implement a way to determine whether a given number is **abundant** or **deficient**.
+
+## Testing
+
+In order to run the tests for this track, you will need to install
+DUnitX. Please see the [installation](http://www.exercism.io/languages/delphi/installing) instructions for more information.
+
+### Loading Exercises into Delphi
+
+If Delphi is properly installed, and `*.dpr` file types have been associated with Delphi, then double clicking the supplied `*.dpr` file will start Delphi and load the exercise/project.  `control + F9` is the keyboard shortcut to compile the project or pressing `F9` will compile and run the project.
+
+Alternatively you may opt to start Delphi and load your project via. the `File` drop down menu.
+
+### When Questions Come Up
+We monitor the [Pascal-Delphi](https://gitter.im/exercism/Pascal-Delphi) support room on [gitter.im](https://gitter.im) to help you with any questions that might arise.
+
+### Submitting Exercises
+
+Note that, when trying to submit an exercise, make sure the exercise file you're submitting is in the `exercism/delphi/<exerciseName>` directory.
+
+For example, if you're submitting `ubob.pas` for the Bob exercise, the submit command would be something like `exercism submit <path_to_exercism_dir>/delphi/bob/ubob.pas`.
+
+## Source
+
+Taken from Chapter 2 of Functional Thinking by Neal Ford. [http://shop.oreilly.com/product/0636920029687.do](http://shop.oreilly.com/product/0636920029687.do)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/delphi/exercises/phone-number/README.md

@@ -0,0 +1,55 @@
+# Phone Number
+
+Clean up user-entered phone numbers so that they can be sent SMS messages.
+
+The **North American Numbering Plan (NANP)** is a telephone numbering system used by many countries in North America like the United States, Canada or Bermuda. All NANP-countries share the same international country code: `1`.
+
+NANP numbers are ten-digit numbers consisting of a three-digit Numbering Plan Area code, commonly known as *area code*, followed by a seven-digit local number. The first three digits of the local number represent the *exchange code*, followed by the unique four-digit number which is the *subscriber number*.
+
+
+The format is usually represented as
+```
+(NXX)-NXX-XXXX
+```
+where `N` is any digit from 2 through 9 and `X` is any digit from 0 through 9.
+
+Your task is to clean up differently formated telephone numbers by removing punctuation and the country code (1) if present.
+
+For example, the inputs
+- `+1 (613)-995-0253`
+- `613-995-0253`
+- `1 613 995 0253`
+- `613.995.0253`
+
+should all produce the output
+
+`6139950253`
+
+**Note:** As this exercise only deals with telephone numbers used in NANP-countries, only 1 is considered a valid country code.
+
+## Testing
+
+In order to run the tests for this track, you will need to install
+DUnitX. Please see the [installation](http://www.exercism.io/languages/delphi/installing) instructions for more information.
+
+### Loading Exercises into Delphi
+
+If Delphi is properly installed, and `*.dpr` file types have been associated with Delphi, then double clicking the supplied `*.dpr` file will start Delphi and load the exercise/project.  `control + F9` is the keyboard shortcut to compile the project or pressing `F9` will compile and run the project.
+
+Alternatively you may opt to start Delphi and load your project via. the `File` drop down menu.
+
+### When Questions Come Up
+We monitor the [Pascal-Delphi](https://gitter.im/exercism/Pascal-Delphi) support room on [gitter.im](https://gitter.im) to help you with any questions that might arise.
+
+### Submitting Exercises
+
+Note that, when trying to submit an exercise, make sure the exercise file you're submitting is in the `exercism/delphi/<exerciseName>` directory.
+
+For example, if you're submitting `ubob.pas` for the Bob exercise, the submit command would be something like `exercism submit <path_to_exercism_dir>/delphi/bob/ubob.pas`.
+
+## Source
+
+Event Manager by JumpstartLab [http://tutorials.jumpstartlab.com/projects/eventmanager.html](http://tutorials.jumpstartlab.com/projects/eventmanager.html)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.