trackler 2.2.0.1 → 2.2.0.2

data/tracks/haskell/exercises/phone-number/README.md

@@ -0,0 +1,88 @@
+# Phone Number
+
+Clean up user-entered phone numbers so that they can be sent SMS messages.
+
+The **North American Numbering Plan (NANP)** is a telephone numbering system used by many countries in North America like the United States, Canada or Bermuda. All NANP-countries share the same international country code: `1`.
+
+NANP numbers are ten-digit numbers consisting of a three-digit Numbering Plan Area code, commonly known as *area code*, followed by a seven-digit local number. The first three digits of the local number represent the *exchange code*, followed by the unique four-digit number which is the *subscriber number*.
+
+
+The format is usually represented as
+```
+(NXX)-NXX-XXXX
+```
+where `N` is any digit from 2 through 9 and `X` is any digit from 0 through 9.
+
+Your task is to clean up differently formated telephone numbers by removing punctuation and the country code (1) if present.
+
+For example, the inputs
+- `+1 (613)-995-0253`
+- `613-995-0253`
+- `1 613 995 0253`
+- `613.995.0253`
+
+should all produce the output
+
+`6139950253`
+
+**Note:** As this exercise only deals with telephone numbers used in NANP-countries, only 1 is considered a valid country code.
+
+
+## Getting Started
+
+For installation and learning resources, refer to the
+[exercism help page](http://exercism.io/languages/haskell).
+
+## Running the tests
+
+To run the test suite, execute the following command:
+
+```bash
+stack test
+```
+
+#### If you get an error message like this...
+
+```
+No .cabal file found in directory
+```
+
+You are probably running an old stack version and need
+to upgrade it.
+
+#### Otherwise, if you get an error message like this...
+
+```
+No compiler found, expected minor version match with...
+Try running "stack setup" to install the correct GHC...
+```
+
+Just do as it says and it will download and install
+the correct compiler version:
+
+```bash
+stack setup
+```
+
+## Running *GHCi*
+
+If you want to play with your solution in GHCi, just run the command:
+
+```bash
+stack ghci
+```
+
+## Feedback, Issues, Pull Requests
+
+The [exercism/haskell](https://github.com/exercism/haskell) repository on
+GitHub is the home for all of the Haskell exercises.
+
+If you have feedback about an exercise, or want to help implementing a new
+one, head over there and create an issue.  We'll do our best to help you!
+
+## Source
+
+Event Manager by JumpstartLab [http://tutorials.jumpstartlab.com/projects/eventmanager.html](http://tutorials.jumpstartlab.com/projects/eventmanager.html)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/haskell/exercises/pig-latin/README.md

@@ -0,0 +1,78 @@
+# Pig Latin
+
+Implement a program that translates from English to Pig Latin.
+
+Pig Latin is a made-up children's language that's intended to be
+confusing. It obeys a few simple rules (below), but when it's spoken
+quickly it's really difficult for non-children (and non-native speakers)
+to understand.
+
+- **Rule 1**: If a word begins with a vowel sound, add an "ay" sound to
+  the end of the word.
+- **Rule 2**: If a word begins with a consonant sound, move it to the
+  end of the word, and then add an "ay" sound to the end of the word.
+
+There are a few more rules for edge cases, and there are regional
+variants too.
+
+See <http://en.wikipedia.org/wiki/Pig_latin> for more details.
+
+
+## Getting Started
+
+For installation and learning resources, refer to the
+[exercism help page](http://exercism.io/languages/haskell).
+
+## Running the tests
+
+To run the test suite, execute the following command:
+
+```bash
+stack test
+```
+
+#### If you get an error message like this...
+
+```
+No .cabal file found in directory
+```
+
+You are probably running an old stack version and need
+to upgrade it.
+
+#### Otherwise, if you get an error message like this...
+
+```
+No compiler found, expected minor version match with...
+Try running "stack setup" to install the correct GHC...
+```
+
+Just do as it says and it will download and install
+the correct compiler version:
+
+```bash
+stack setup
+```
+
+## Running *GHCi*
+
+If you want to play with your solution in GHCi, just run the command:
+
+```bash
+stack ghci
+```
+
+## Feedback, Issues, Pull Requests
+
+The [exercism/haskell](https://github.com/exercism/haskell) repository on
+GitHub is the home for all of the Haskell exercises.
+
+If you have feedback about an exercise, or want to help implementing a new
+one, head over there and create an issue.  We'll do our best to help you!
+
+## Source
+
+The Pig Latin exercise at Test First Teaching by Ultrasaurus [https://github.com/ultrasaurus/test-first-teaching/blob/master/learn_ruby/pig_latin/](https://github.com/ultrasaurus/test-first-teaching/blob/master/learn_ruby/pig_latin/)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/haskell/exercises/pov/README.md

@@ -0,0 +1,100 @@
+# Pov
+
+Reparent a graph on a selected node.
+
+# Tree Reparenting
+
+This exercise is all about re-orientating a graph to see things from a different
+point of view. For example family trees are usually presented from the
+ancestor's perspective:
+
+```
+    +------0------+
+    |      |      |
+  +-1-+  +-2-+  +-3-+
+  |   |  |   |  |   |
+  4   5  6   7  8   9
+```
+
+But the same information can be presented from the perspective of any other node
+in the graph, by pulling it up to the root and dragging its relationships along
+with it. So the same graph from 6's perspective would look like:
+
+```
+        6
+        |
+  +-----2-----+
+  |           |
+  7     +-----0-----+
+        |           |
+      +-1-+       +-3-+
+      |   |       |   |
+      4   5       8   9
+```
+
+This lets us more simply describe the paths between two nodes. So for example
+the path from 6-9 (which in the first graph goes up to the root and then down to
+a different leaf node) can be seen to follow the path 6-2-0-3-9
+
+This exercise involves taking an input graph and re-orientating it from the point
+of view of one of the nodes.
+
+
+## Getting Started
+
+For installation and learning resources, refer to the
+[exercism help page](http://exercism.io/languages/haskell).
+
+## Running the tests
+
+To run the test suite, execute the following command:
+
+```bash
+stack test
+```
+
+#### If you get an error message like this...
+
+```
+No .cabal file found in directory
+```
+
+You are probably running an old stack version and need
+to upgrade it.
+
+#### Otherwise, if you get an error message like this...
+
+```
+No compiler found, expected minor version match with...
+Try running "stack setup" to install the correct GHC...
+```
+
+Just do as it says and it will download and install
+the correct compiler version:
+
+```bash
+stack setup
+```
+
+## Running *GHCi*
+
+If you want to play with your solution in GHCi, just run the command:
+
+```bash
+stack ghci
+```
+
+## Feedback, Issues, Pull Requests
+
+The [exercism/haskell](https://github.com/exercism/haskell) repository on
+GitHub is the home for all of the Haskell exercises.
+
+If you have feedback about an exercise, or want to help implementing a new
+one, head over there and create an issue.  We'll do our best to help you!
+
+## Source
+
+Adaptation of exercise from 4clojure [https://www.4clojure.com/](https://www.4clojure.com/)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/haskell/exercises/prime-factors/README.md

@@ -0,0 +1,90 @@
+# Prime Factors
+
+Compute the prime factors of a given natural number.
+
+A prime number is only evenly divisible by itself and 1.
+
+Note that 1 is not a prime number.
+
+## Example
+
+What are the prime factors of 60?
+
+- Our first divisor is 2. 2 goes into 60, leaving 30.
+- 2 goes into 30, leaving 15.
+  - 2 doesn't go cleanly into 15. So let's move on to our next divisor, 3.
+- 3 goes cleanly into 15, leaving 5.
+  - 3 does not go cleanly into 5. The next possible factor is 4.
+  - 4 does not go cleanly into 5. The next possible factor is 5.
+- 5 does go cleanly into 5.
+- We're left only with 1, so now, we're done.
+
+Our successful divisors in that computation represent the list of prime
+factors of 60: 2, 2, 3, and 5.
+
+You can check this yourself:
+
+- 2 * 2 * 3 * 5
+- = 4 * 15
+- = 60
+- Success!
+
+
+## Getting Started
+
+For installation and learning resources, refer to the
+[exercism help page](http://exercism.io/languages/haskell).
+
+## Running the tests
+
+To run the test suite, execute the following command:
+
+```bash
+stack test
+```
+
+#### If you get an error message like this...
+
+```
+No .cabal file found in directory
+```
+
+You are probably running an old stack version and need
+to upgrade it.
+
+#### Otherwise, if you get an error message like this...
+
+```
+No compiler found, expected minor version match with...
+Try running "stack setup" to install the correct GHC...
+```
+
+Just do as it says and it will download and install
+the correct compiler version:
+
+```bash
+stack setup
+```
+
+## Running *GHCi*
+
+If you want to play with your solution in GHCi, just run the command:
+
+```bash
+stack ghci
+```
+
+## Feedback, Issues, Pull Requests
+
+The [exercism/haskell](https://github.com/exercism/haskell) repository on
+GitHub is the home for all of the Haskell exercises.
+
+If you have feedback about an exercise, or want to help implementing a new
+one, head over there and create an issue.  We'll do our best to help you!
+
+## Source
+
+The Prime Factors Kata by Uncle Bob [http://butunclebob.com/ArticleS.UncleBob.ThePrimeFactorsKata](http://butunclebob.com/ArticleS.UncleBob.ThePrimeFactorsKata)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/haskell/exercises/pythagorean-triplet/README.md

@@ -0,0 +1,78 @@
+# Pythagorean Triplet
+
+A Pythagorean triplet is a set of three natural numbers, {a, b, c}, for
+which,
+
+```
+a**2 + b**2 = c**2
+```
+
+For example, 
+
+```
+3**2 + 4**2 = 9 + 16 = 25 = 5**2.
+```
+
+There exists exactly one Pythagorean triplet for which a + b + c = 1000.
+
+Find the product a * b * c.
+
+
+## Getting Started
+
+For installation and learning resources, refer to the
+[exercism help page](http://exercism.io/languages/haskell).
+
+## Running the tests
+
+To run the test suite, execute the following command:
+
+```bash
+stack test
+```
+
+#### If you get an error message like this...
+
+```
+No .cabal file found in directory
+```
+
+You are probably running an old stack version and need
+to upgrade it.
+
+#### Otherwise, if you get an error message like this...
+
+```
+No compiler found, expected minor version match with...
+Try running "stack setup" to install the correct GHC...
+```
+
+Just do as it says and it will download and install
+the correct compiler version:
+
+```bash
+stack setup
+```
+
+## Running *GHCi*
+
+If you want to play with your solution in GHCi, just run the command:
+
+```bash
+stack ghci
+```
+
+## Feedback, Issues, Pull Requests
+
+The [exercism/haskell](https://github.com/exercism/haskell) repository on
+GitHub is the home for all of the Haskell exercises.
+
+If you have feedback about an exercise, or want to help implementing a new
+one, head over there and create an issue.  We'll do our best to help you!
+
+## Source
+
+Problem 9 at Project Euler [http://projecteuler.net/problem=9](http://projecteuler.net/problem=9)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/haskell/exercises/queen-attack/README.md

@@ -0,0 +1,105 @@
+# Queen Attack
+
+Given the position of two queens on a chess board, indicate whether or not they
+are positioned so that they can attack each other.
+
+In the game of chess, a queen can attack pieces which are on the same
+row, column, or diagonal.
+
+A chessboard can be represented by an 8 by 8 array.
+
+So if you're told the white queen is at (2, 3) and the black queen at
+(5, 6), then you'd know you've got a set-up like so:
+
+```plain
+_ _ _ _ _ _ _ _
+_ _ _ _ _ _ _ _
+_ _ _ W _ _ _ _
+_ _ _ _ _ _ _ _
+_ _ _ _ _ _ _ _
+_ _ _ _ _ _ B _
+_ _ _ _ _ _ _ _
+_ _ _ _ _ _ _ _
+```
+
+You'd also be able to answer whether the queens can attack each other.
+In this case, that answer would be yes, they can, because both pieces
+share a diagonal.
+
+## Hints
+
+To complete this exercise, you need to implement the following functions:
+
+- `boardString`
+- `canAttack`
+
+You will find the type signatures already in place, but it is up to you
+to define the functions.
+
+Positions are specified as two-tuples:
+
+- The first element is the row (rank in Chess terms).
+- The second element is is the column (file in Chess terms).
+- (0, 0) is the top left of the board, (0, 7) is the upper right,
+- (7, 0) is the bottom left, and (7, 7) is the bottom right.
+
+
+
+## Getting Started
+
+For installation and learning resources, refer to the
+[exercism help page](http://exercism.io/languages/haskell).
+
+## Running the tests
+
+To run the test suite, execute the following command:
+
+```bash
+stack test
+```
+
+#### If you get an error message like this...
+
+```
+No .cabal file found in directory
+```
+
+You are probably running an old stack version and need
+to upgrade it.
+
+#### Otherwise, if you get an error message like this...
+
+```
+No compiler found, expected minor version match with...
+Try running "stack setup" to install the correct GHC...
+```
+
+Just do as it says and it will download and install
+the correct compiler version:
+
+```bash
+stack setup
+```
+
+## Running *GHCi*
+
+If you want to play with your solution in GHCi, just run the command:
+
+```bash
+stack ghci
+```
+
+## Feedback, Issues, Pull Requests
+
+The [exercism/haskell](https://github.com/exercism/haskell) repository on
+GitHub is the home for all of the Haskell exercises.
+
+If you have feedback about an exercise, or want to help implementing a new
+one, head over there and create an issue.  We'll do our best to help you!
+
+## Source
+
+J Dalbey's Programming Practice problems [http://users.csc.calpoly.edu/~jdalbey/103/Projects/ProgrammingPractice.html](http://users.csc.calpoly.edu/~jdalbey/103/Projects/ProgrammingPractice.html)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/haskell/exercises/raindrops/README.md

@@ -0,0 +1,78 @@
+# Raindrops
+
+Convert a number to a string, the contents of which depend on the number's factors.
+
+- If the number has 3 as a factor, output 'Pling'.
+- If the number has 5 as a factor, output 'Plang'.
+- If the number has 7 as a factor, output 'Plong'.
+- If the number does not have 3, 5, or 7 as a factor,
+  just pass the number's digits straight through.
+
+## Examples
+
+- 28's factors are 1, 2, 4, **7**, 14, 28.
+  - In raindrop-speak, this would be a simple "Plong".
+- 30's factors are 1, 2, **3**, **5**, 6, 10, 15, 30.
+  - In raindrop-speak, this would be a "PlingPlang".
+- 34 has four factors: 1, 2, 17, and 34.
+  - In raindrop-speak, this would be "34".
+
+
+## Getting Started
+
+For installation and learning resources, refer to the
+[exercism help page](http://exercism.io/languages/haskell).
+
+## Running the tests
+
+To run the test suite, execute the following command:
+
+```bash
+stack test
+```
+
+#### If you get an error message like this...
+
+```
+No .cabal file found in directory
+```
+
+You are probably running an old stack version and need
+to upgrade it.
+
+#### Otherwise, if you get an error message like this...
+
+```
+No compiler found, expected minor version match with...
+Try running "stack setup" to install the correct GHC...
+```
+
+Just do as it says and it will download and install
+the correct compiler version:
+
+```bash
+stack setup
+```
+
+## Running *GHCi*
+
+If you want to play with your solution in GHCi, just run the command:
+
+```bash
+stack ghci
+```
+
+## Feedback, Issues, Pull Requests
+
+The [exercism/haskell](https://github.com/exercism/haskell) repository on
+GitHub is the home for all of the Haskell exercises.
+
+If you have feedback about an exercise, or want to help implementing a new
+one, head over there and create an issue.  We'll do our best to help you!
+
+## Source
+
+A variation on a famous interview question intended to weed out potential candidates. [http://jumpstartlab.com](http://jumpstartlab.com)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.

data/tracks/haskell/exercises/rna-transcription/README.md

@@ -0,0 +1,79 @@
+# Rna Transcription
+
+Given a DNA strand, return its RNA complement (per RNA transcription).
+
+Both DNA and RNA strands are a sequence of nucleotides.
+
+The four nucleotides found in DNA are adenine (**A**), cytosine (**C**),
+guanine (**G**) and thymine (**T**).
+
+The four nucleotides found in RNA are adenine (**A**), cytosine (**C**),
+guanine (**G**) and uracil (**U**).
+
+Given a DNA strand, its transcribed RNA strand is formed by replacing
+each nucleotide with its complement:
+
+* `G` -> `C`
+* `C` -> `G`
+* `T` -> `A`
+* `A` -> `U`
+
+
+## Getting Started
+
+For installation and learning resources, refer to the
+[exercism help page](http://exercism.io/languages/haskell).
+
+## Running the tests
+
+To run the test suite, execute the following command:
+
+```bash
+stack test
+```
+
+#### If you get an error message like this...
+
+```
+No .cabal file found in directory
+```
+
+You are probably running an old stack version and need
+to upgrade it.
+
+#### Otherwise, if you get an error message like this...
+
+```
+No compiler found, expected minor version match with...
+Try running "stack setup" to install the correct GHC...
+```
+
+Just do as it says and it will download and install
+the correct compiler version:
+
+```bash
+stack setup
+```
+
+## Running *GHCi*
+
+If you want to play with your solution in GHCi, just run the command:
+
+```bash
+stack ghci
+```
+
+## Feedback, Issues, Pull Requests
+
+The [exercism/haskell](https://github.com/exercism/haskell) repository on
+GitHub is the home for all of the Haskell exercises.
+
+If you have feedback about an exercise, or want to help implementing a new
+one, head over there and create an issue.  We'll do our best to help you!
+
+## Source
+
+Rosalind [http://rosalind.info/problems/rna](http://rosalind.info/problems/rna)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.