therubyracer 0.4.7-x86-darwin-10

data/ext/v8/upstream/scons/LICENSE.txt

@@ -0,0 +1,20 @@
+Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 The SCons Foundation
+
+Permission is hereby granted, free of charge, to any person obtaining
+a copy of this software and associated documentation files (the
+"Software"), to deal in the Software without restriction, including
+without limitation the rights to use, copy, modify, merge, publish,
+distribute, sublicense, and/or sell copies of the Software, and to
+permit persons to whom the Software is furnished to do so, subject to
+the following conditions:
+
+The above copyright notice and this permission notice shall be included
+in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY
+KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
+WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
+LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

data/ext/v8/upstream/scons/MANIFEST

@@ -0,0 +1,202 @@
+CHANGES.txt
+LICENSE.txt
+MANIFEST
+README.txt
+RELEASE.txt
+engine/SCons/Action.py
+engine/SCons/Builder.py
+engine/SCons/CacheDir.py
+engine/SCons/Conftest.py
+engine/SCons/Debug.py
+engine/SCons/Defaults.py
+engine/SCons/Environment.py
+engine/SCons/Errors.py
+engine/SCons/Executor.py
+engine/SCons/Job.py
+engine/SCons/Memoize.py
+engine/SCons/Node/Alias.py
+engine/SCons/Node/FS.py
+engine/SCons/Node/Python.py
+engine/SCons/Node/__init__.py
+engine/SCons/Options/BoolOption.py
+engine/SCons/Options/EnumOption.py
+engine/SCons/Options/ListOption.py
+engine/SCons/Options/PackageOption.py
+engine/SCons/Options/PathOption.py
+engine/SCons/Options/__init__.py
+engine/SCons/PathList.py
+engine/SCons/Platform/__init__.py
+engine/SCons/Platform/aix.py
+engine/SCons/Platform/cygwin.py
+engine/SCons/Platform/darwin.py
+engine/SCons/Platform/hpux.py
+engine/SCons/Platform/irix.py
+engine/SCons/Platform/os2.py
+engine/SCons/Platform/posix.py
+engine/SCons/Platform/sunos.py
+engine/SCons/Platform/win32.py
+engine/SCons/SConf.py
+engine/SCons/SConsign.py
+engine/SCons/Scanner/C.py
+engine/SCons/Scanner/D.py
+engine/SCons/Scanner/Dir.py
+engine/SCons/Scanner/Fortran.py
+engine/SCons/Scanner/IDL.py
+engine/SCons/Scanner/LaTeX.py
+engine/SCons/Scanner/Prog.py
+engine/SCons/Scanner/RC.py
+engine/SCons/Scanner/__init__.py
+engine/SCons/Script/Interactive.py
+engine/SCons/Script/Main.py
+engine/SCons/Script/SConsOptions.py
+engine/SCons/Script/SConscript.py
+engine/SCons/Script/__init__.py
+engine/SCons/Sig.py
+engine/SCons/Subst.py
+engine/SCons/Taskmaster.py
+engine/SCons/Tool/386asm.py
+engine/SCons/Tool/BitKeeper.py
+engine/SCons/Tool/CVS.py
+engine/SCons/Tool/FortranCommon.py
+engine/SCons/Tool/JavaCommon.py
+engine/SCons/Tool/MSCommon/__init__.py
+engine/SCons/Tool/MSCommon/arch.py
+engine/SCons/Tool/MSCommon/common.py
+engine/SCons/Tool/MSCommon/netframework.py
+engine/SCons/Tool/MSCommon/sdk.py
+engine/SCons/Tool/MSCommon/vc.py
+engine/SCons/Tool/MSCommon/vs.py
+engine/SCons/Tool/Perforce.py
+engine/SCons/Tool/PharLapCommon.py
+engine/SCons/Tool/RCS.py
+engine/SCons/Tool/SCCS.py
+engine/SCons/Tool/Subversion.py
+engine/SCons/Tool/__init__.py
+engine/SCons/Tool/aixc++.py
+engine/SCons/Tool/aixcc.py
+engine/SCons/Tool/aixf77.py
+engine/SCons/Tool/aixlink.py
+engine/SCons/Tool/applelink.py
+engine/SCons/Tool/ar.py
+engine/SCons/Tool/as.py
+engine/SCons/Tool/bcc32.py
+engine/SCons/Tool/c++.py
+engine/SCons/Tool/cc.py
+engine/SCons/Tool/cvf.py
+engine/SCons/Tool/default.py
+engine/SCons/Tool/dmd.py
+engine/SCons/Tool/dvi.py
+engine/SCons/Tool/dvipdf.py
+engine/SCons/Tool/dvips.py
+engine/SCons/Tool/f77.py
+engine/SCons/Tool/f90.py
+engine/SCons/Tool/f95.py
+engine/SCons/Tool/filesystem.py
+engine/SCons/Tool/fortran.py
+engine/SCons/Tool/g++.py
+engine/SCons/Tool/g77.py
+engine/SCons/Tool/gas.py
+engine/SCons/Tool/gcc.py
+engine/SCons/Tool/gfortran.py
+engine/SCons/Tool/gnulink.py
+engine/SCons/Tool/gs.py
+engine/SCons/Tool/hpc++.py
+engine/SCons/Tool/hpcc.py
+engine/SCons/Tool/hplink.py
+engine/SCons/Tool/icc.py
+engine/SCons/Tool/icl.py
+engine/SCons/Tool/ifl.py
+engine/SCons/Tool/ifort.py
+engine/SCons/Tool/ilink.py
+engine/SCons/Tool/ilink32.py
+engine/SCons/Tool/install.py
+engine/SCons/Tool/intelc.py
+engine/SCons/Tool/ipkg.py
+engine/SCons/Tool/jar.py
+engine/SCons/Tool/javac.py
+engine/SCons/Tool/javah.py
+engine/SCons/Tool/latex.py
+engine/SCons/Tool/lex.py
+engine/SCons/Tool/link.py
+engine/SCons/Tool/linkloc.py
+engine/SCons/Tool/m4.py
+engine/SCons/Tool/masm.py
+engine/SCons/Tool/midl.py
+engine/SCons/Tool/mingw.py
+engine/SCons/Tool/mslib.py
+engine/SCons/Tool/mslink.py
+engine/SCons/Tool/mssdk.py
+engine/SCons/Tool/msvc.py
+engine/SCons/Tool/msvs.py
+engine/SCons/Tool/mwcc.py
+engine/SCons/Tool/mwld.py
+engine/SCons/Tool/nasm.py
+engine/SCons/Tool/packaging/__init__.py
+engine/SCons/Tool/packaging/ipk.py
+engine/SCons/Tool/packaging/msi.py
+engine/SCons/Tool/packaging/rpm.py
+engine/SCons/Tool/packaging/src_tarbz2.py
+engine/SCons/Tool/packaging/src_targz.py
+engine/SCons/Tool/packaging/src_zip.py
+engine/SCons/Tool/packaging/tarbz2.py
+engine/SCons/Tool/packaging/targz.py
+engine/SCons/Tool/packaging/zip.py
+engine/SCons/Tool/pdf.py
+engine/SCons/Tool/pdflatex.py
+engine/SCons/Tool/pdftex.py
+engine/SCons/Tool/qt.py
+engine/SCons/Tool/rmic.py
+engine/SCons/Tool/rpcgen.py
+engine/SCons/Tool/rpm.py
+engine/SCons/Tool/sgiar.py
+engine/SCons/Tool/sgic++.py
+engine/SCons/Tool/sgicc.py
+engine/SCons/Tool/sgilink.py
+engine/SCons/Tool/sunar.py
+engine/SCons/Tool/sunc++.py
+engine/SCons/Tool/suncc.py
+engine/SCons/Tool/sunf77.py
+engine/SCons/Tool/sunf90.py
+engine/SCons/Tool/sunf95.py
+engine/SCons/Tool/sunlink.py
+engine/SCons/Tool/swig.py
+engine/SCons/Tool/tar.py
+engine/SCons/Tool/tex.py
+engine/SCons/Tool/textfile.py
+engine/SCons/Tool/tlib.py
+engine/SCons/Tool/wix.py
+engine/SCons/Tool/yacc.py
+engine/SCons/Tool/zip.py
+engine/SCons/Util.py
+engine/SCons/Variables/BoolVariable.py
+engine/SCons/Variables/EnumVariable.py
+engine/SCons/Variables/ListVariable.py
+engine/SCons/Variables/PackageVariable.py
+engine/SCons/Variables/PathVariable.py
+engine/SCons/Variables/__init__.py
+engine/SCons/Warnings.py
+engine/SCons/__init__.py
+engine/SCons/compat/__init__.py
+engine/SCons/compat/_scons_UserString.py
+engine/SCons/compat/_scons_hashlib.py
+engine/SCons/compat/_scons_itertools.py
+engine/SCons/compat/_scons_optparse.py
+engine/SCons/compat/_scons_sets.py
+engine/SCons/compat/_scons_sets15.py
+engine/SCons/compat/_scons_shlex.py
+engine/SCons/compat/_scons_subprocess.py
+engine/SCons/compat/_scons_textwrap.py
+engine/SCons/compat/builtins.py
+engine/SCons/cpp.py
+engine/SCons/dblite.py
+engine/SCons/exitfuncs.py
+os_spawnv_fix.diff
+scons-time.1
+scons.1
+sconsign.1
+script/scons
+script/scons-time
+script/scons.bat
+script/sconsign
+setup.cfg
+setup.py

data/ext/v8/upstream/scons/PKG-INFO

@@ -0,0 +1,13 @@
+Metadata-Version: 1.0
+Name: scons
+Version: 1.2.0.d20100117
+Summary: Open Source next-generation build tool.
+Home-page: http://www.scons.org/
+Author: Steven Knight
+Author-email: knight@baldmt.com
+License: UNKNOWN
+Description: Open Source next-generation build tool.
+        Improved, cross-platform substitute for the classic Make
+        utility.  In short, SCons is an easier, more reliable
+        and faster way to build software.
+Platform: UNKNOWN

data/ext/v8/upstream/scons/README.txt

@@ -0,0 +1,273 @@
+# Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 The SCons Foundation
+# src/README.txt 4629 2010/01/17 22:23:21 scons
+
+
+                 SCons - a software construction tool
+
+                         Version 1.2.0.d20100117
+
+
+This is SCons, a tool for building software (and other files).  SCons is
+implemented in Python, and its "configuration files" are actually Python
+scripts, allowing you to use the full power of a real scripting language
+to solve build problems.  You do not, however, need to know Python to
+use SCons effectively.
+
+See the RELEASE.txt file for notes about this specific release,
+including known problems.  See the CHANGES.txt file for a list of
+changes since the previous release.
+
+
+LATEST VERSION
+==============
+
+Before going further, you can check that this package you have is
+the latest version by checking the SCons download page at:
+
+        http://www.scons.org/download.html
+
+
+EXECUTION REQUIREMENTS
+======================
+
+Running SCons requires Python version 1.5.2 or later.  There should be
+no other dependencies or requirements to run SCons.  (There is, however,
+an additional requirement to *install* SCons from this particular
+package; see the next section.)
+
+By default, SCons knows how to search for available programming tools
+on various systems--see the SCons man page for details.  You may,
+of course, override the default SCons choices made by appropriate
+configuration of Environment construction variables.
+
+
+INSTALLATION REQUIREMENTS
+=========================
+
+Installing SCons from this package requires the Python distutils
+package.  The distutils package was not shipped as a standard part of
+Python until Python version 1.6, so if your system is running Python
+1.5.2, you may not have distutils installed.  If you are running
+Python version 1.6 or later, you should be fine.
+
+NOTE TO RED HAT USERS:  Red Hat shipped Python 1.5.2 as the default all
+the way up to Red Hat Linux 7.3, so you probably do *not* have distutils
+installed, unless you have already done so manually or are running Red
+Hat 8.0 or later.
+
+In this case, your options are:
+
+    --  (Recommended.)  Install from a pre-packaged SCons package that
+        does not require distutils:
+
+            Red Hat Linux       scons-1.2.0.d20100117-1.noarch.rpm
+
+            Debian GNU/Linux    scons_1.2.0.d20100117-1_all.deb
+                                (or use apt-get)
+
+            Windows             scons-1.2.0.d20100117.win32.exe
+
+    --  (Optional.)  Download the latest distutils package from the
+        following URL:
+
+            http://www.python.org/sigs/distutils-sig/download.html
+
+        Install the distutils according to the instructions on the page.
+        You can then proceed to the next section to install SCons from
+        this package.
+
+
+INSTALLATION
+============
+
+Assuming your system satisfies the installation requirements in the
+previous section, install SCons from this package simply by running the
+provided Python-standard setup script as follows:
+
+        # python setup.py install
+
+By default, the above command will do the following:
+
+    --  Install the version-numbered "scons-1.2.0.d20100117" and "sconsign-1.2.0.d20100117"
+        scripts in the default system script directory (/usr/bin or
+        C:\Python*\Scripts, for example).  This can be disabled by
+        specifying the "--no-version-script" option on the command
+        line.
+
+    --  Install scripts named "scons" and "sconsign" scripts in the
+        default system script directory (/usr/bin or C:\Python*\Scripts,
+        for example).  This can be disabled by specifying the
+        "--no-scons-script" option on the command line, which is useful
+        if you want to install and experiment with a new version before
+        making it the default on your system.
+
+        On UNIX or Linux systems, you can have the "scons" and "sconsign"
+        scripts be hard links or symbolic links to the "scons-1.2.0.d20100117" and
+        "sconsign-1.2.0.d20100117" scripts by specifying the "--hardlink-scons"
+        or "--symlink-scons" options on the command line.
+
+    --  Install "scons-1.2.0.d20100117.bat" and "scons.bat" wrapper scripts in the
+        Python prefix directory on Windows (C:\Python*, for example).
+        This can be disabled by specifying the "--no-install-bat" option
+        on the command line.
+
+        On UNIX or Linux systems, the "--install-bat" option may be
+        specified to have "scons-1.2.0.d20100117.bat" and "scons.bat" files
+        installed in the default system script directory, which is useful
+        if you want to install SCons in a shared file system directory
+        that can be used to execute SCons from both UNIX/Linux and
+        Windows systems.
+
+    --  Install the SCons build engine (a Python module) in an
+        appropriate version-numbered SCons library directory
+        (/usr/lib/scons-1.2.0.d20100117 or C:\Python*\scons-1.2.0.d20100117, for example).
+        See below for more options related to installing the build
+        engine library.
+
+    --  Install the troff-format man pages in an appropriate directory
+        on UNIX or Linux systems (/usr/share/man/man1 or /usr/man/man1,
+        for example).  This can be disabled by specifying the
+        "--no-install-man" option on the command line.  The man pages
+        can be installed on Windows systems by specifying the
+        "--install-man" option on the command line.
+
+Note that, by default, SCons does not install its build engine library
+in the standard Python library directories.  If you want to be able to
+use the SCons library modules (the build engine) in other Python
+scripts, specify the "--standard-lib" option on the command line, as
+follows:
+
+        # python setup.py install --standard-lib
+
+This will install the build engine in the standard Python library
+directory (/usr/lib/python*/site-packages or
+C:\Python*\Lib\site-packages).
+
+Alternatively, you can have SCons install its build engine library in a
+hard-coded standalone library directory, instead of the default
+version-numbered directory, by specifying the "--standalone-lib" option
+on the command line, as follows:
+
+        # python setup.py install --standalone-lib
+
+This is usually not recommended, however.
+
+Note that, to install SCons in any of the above system directories,
+you should have system installation privileges (that is, "root" or
+"Administrator") when running the setup.py script.  If you don't have
+system installation privileges, you can use the --prefix option to
+specify an alternate installation location, such as your home directory:
+
+        $ python setup.py install --prefix=$HOME
+
+This will install SCons in the appropriate locations relative to
+$HOME--that is, the scons script itself $HOME/bin and the associated
+library in $HOME/lib/scons, for example.
+
+
+DOCUMENTATION
+=============
+
+See the RELEASE.txt file for notes about this specific release,
+including known problems.  See the CHANGES.txt file for a list of
+changes since the previous release.
+
+The scons.1 man page is included in this package, and contains a section
+of small examples for getting started using SCons.
+
+Additional documentation for SCons is available at:
+
+        http://www.scons.org/doc.html
+
+
+LICENSING
+=========
+
+SCons is distributed under the MIT license, a full copy of which is
+available in the LICENSE.txt file. The MIT license is an approved Open
+Source license, which means:
+
+        This software is OSI Certified Open Source Software.  OSI
+        Certified is a certification mark of the Open Source Initiative.
+
+More information about OSI certifications and Open Source software is
+available at:
+
+        http://www.opensource.org/
+
+
+REPORTING BUGS
+==============
+
+Please report bugs by following the detailed instructions on our Bug
+Submission page:
+
+        http://scons.tigris.org/bug-submission.html
+
+You can also send mail to the SCons developers' mailing list:
+
+        dev@scons.tigris.org
+
+But even if you send email to the mailing list please make sure that you
+ALSO submit a bug report to the project page bug tracker, because bug
+reports in email often get overlooked in the general flood of messages.
+
+
+MAILING LISTS
+=============
+
+An active mailing list for users of SCons is available.  You may send
+questions or comments to the list at:
+
+        users@scons.tigris.org
+
+You may subscribe to the mailing list by sending email to:
+
+        users-subscribe@scons.tigris.org
+
+There is also a low-volume mailing list available for announcements
+about SCons.  Subscribe by sending email to:
+
+        announce-subscribe@scons.tigris.org
+
+There are other mailing lists available for SCons developers, for
+notification of SCons code changes, and for notification of updated
+bug reports and project documents.  Please see our mailing lists page
+for details.
+
+
+DONATIONS
+=========
+
+If you find SCons helpful, please consider making a donation (of cash,
+software, or hardware) to support continued work on the project.
+Information is available at:
+
+        http://www.scons.org/donate.html
+
+
+FOR MORE INFORMATION
+====================
+
+Check the SCons web site at:
+
+        http://www.scons.org/
+
+
+AUTHOR INFO
+===========
+
+Steven Knight
+knight at baldmt dot com
+http://www.baldmt.com/~knight/
+
+With plenty of help from the SCons Development team:
+        Chad Austin
+        Charles Crain
+        Steve Leblanc
+        Greg Noel
+        Gary Oberbrunner
+        Anthony Roach
+        Greg Spencer
+        Christoph Wiedemann
+