puma-plus-core 0.1.0

data/go/vendor/golang.org/x/net/ipv6/doc.go

@@ -0,0 +1,239 @@
+// Copyright 2013 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Package ipv6 implements IP-level socket options for the Internet
+// Protocol version 6.
+//
+// The package provides IP-level socket options that allow
+// manipulation of IPv6 facilities.
+//
+// The IPv6 protocol is defined in RFC 8200.
+// Socket interface extensions are defined in RFC 3493, RFC 3542 and
+// RFC 3678.
+// MLDv1 and MLDv2 are defined in RFC 2710 and RFC 3810.
+// Source-specific multicast is defined in RFC 4607.
+//
+// On Darwin, this package requires OS X Mavericks version 10.9 or
+// above, or equivalent.
+//
+// # Unicasting
+//
+// The options for unicasting are available for net.TCPConn,
+// net.UDPConn and net.IPConn which are created as network connections
+// that use the IPv6 transport. When a single TCP connection carrying
+// a data flow of multiple packets needs to indicate the flow is
+// important, Conn is used to set the traffic class field on the IPv6
+// header for each packet.
+//
+//	ln, err := net.Listen("tcp6", "[::]:1024")
+//	if err != nil {
+//		// error handling
+//	}
+//	defer ln.Close()
+//	for {
+//		c, err := ln.Accept()
+//		if err != nil {
+//			// error handling
+//		}
+//		go func(c net.Conn) {
+//			defer c.Close()
+//
+// The outgoing packets will be labeled DiffServ assured forwarding
+// class 1 low drop precedence, known as AF11 packets.
+//
+//			if err := ipv6.NewConn(c).SetTrafficClass(0x28); err != nil {
+//				// error handling
+//			}
+//			if _, err := c.Write(data); err != nil {
+//				// error handling
+//			}
+//		}(c)
+//	}
+//
+// # Multicasting
+//
+// The options for multicasting are available for net.UDPConn and
+// net.IPConn which are created as network connections that use the
+// IPv6 transport. A few network facilities must be prepared before
+// you begin multicasting, at a minimum joining network interfaces and
+// multicast groups.
+//
+//	en0, err := net.InterfaceByName("en0")
+//	if err != nil {
+//		// error handling
+//	}
+//	en1, err := net.InterfaceByIndex(911)
+//	if err != nil {
+//		// error handling
+//	}
+//	group := net.ParseIP("ff02::114")
+//
+// First, an application listens to an appropriate address with an
+// appropriate service port.
+//
+//	c, err := net.ListenPacket("udp6", "[::]:1024")
+//	if err != nil {
+//		// error handling
+//	}
+//	defer c.Close()
+//
+// Second, the application joins multicast groups, starts listening to
+// the groups on the specified network interfaces. Note that the
+// service port for transport layer protocol does not matter with this
+// operation as joining groups affects only network and link layer
+// protocols, such as IPv6 and Ethernet.
+//
+//	p := ipv6.NewPacketConn(c)
+//	if err := p.JoinGroup(en0, &net.UDPAddr{IP: group}); err != nil {
+//		// error handling
+//	}
+//	if err := p.JoinGroup(en1, &net.UDPAddr{IP: group}); err != nil {
+//		// error handling
+//	}
+//
+// The application might set per packet control message transmissions
+// between the protocol stack within the kernel. When the application
+// needs a destination address on an incoming packet,
+// SetControlMessage of PacketConn is used to enable control message
+// transmissions.
+//
+//	if err := p.SetControlMessage(ipv6.FlagDst, true); err != nil {
+//		// error handling
+//	}
+//
+// The application could identify whether the received packets are
+// of interest by using the control message that contains the
+// destination address of the received packet.
+//
+//	b := make([]byte, 1500)
+//	for {
+//		n, rcm, src, err := p.ReadFrom(b)
+//		if err != nil {
+//			// error handling
+//		}
+//		if rcm.Dst.IsMulticast() {
+//			if rcm.Dst.Equal(group) {
+//				// joined group, do something
+//			} else {
+//				// unknown group, discard
+//				continue
+//			}
+//		}
+//
+// The application can also send both unicast and multicast packets.
+//
+//		p.SetTrafficClass(0x0)
+//		p.SetHopLimit(16)
+//		if _, err := p.WriteTo(data[:n], nil, src); err != nil {
+//			// error handling
+//		}
+//		dst := &net.UDPAddr{IP: group, Port: 1024}
+//		wcm := ipv6.ControlMessage{TrafficClass: 0xe0, HopLimit: 1}
+//		for _, ifi := range []*net.Interface{en0, en1} {
+//			wcm.IfIndex = ifi.Index
+//			if _, err := p.WriteTo(data[:n], &wcm, dst); err != nil {
+//				// error handling
+//			}
+//		}
+//	}
+//
+// # More multicasting
+//
+// An application that uses PacketConn may join multiple multicast
+// groups. For example, a UDP listener with port 1024 might join two
+// different groups across over two different network interfaces by
+// using:
+//
+//	c, err := net.ListenPacket("udp6", "[::]:1024")
+//	if err != nil {
+//		// error handling
+//	}
+//	defer c.Close()
+//	p := ipv6.NewPacketConn(c)
+//	if err := p.JoinGroup(en0, &net.UDPAddr{IP: net.ParseIP("ff02::1:114")}); err != nil {
+//		// error handling
+//	}
+//	if err := p.JoinGroup(en0, &net.UDPAddr{IP: net.ParseIP("ff02::2:114")}); err != nil {
+//		// error handling
+//	}
+//	if err := p.JoinGroup(en1, &net.UDPAddr{IP: net.ParseIP("ff02::2:114")}); err != nil {
+//		// error handling
+//	}
+//
+// It is possible for multiple UDP listeners that listen on the same
+// UDP port to join the same multicast group. The net package will
+// provide a socket that listens to a wildcard address with reusable
+// UDP port when an appropriate multicast address prefix is passed to
+// the net.ListenPacket or net.ListenUDP.
+//
+//	c1, err := net.ListenPacket("udp6", "[ff02::]:1024")
+//	if err != nil {
+//		// error handling
+//	}
+//	defer c1.Close()
+//	c2, err := net.ListenPacket("udp6", "[ff02::]:1024")
+//	if err != nil {
+//		// error handling
+//	}
+//	defer c2.Close()
+//	p1 := ipv6.NewPacketConn(c1)
+//	if err := p1.JoinGroup(en0, &net.UDPAddr{IP: net.ParseIP("ff02::114")}); err != nil {
+//		// error handling
+//	}
+//	p2 := ipv6.NewPacketConn(c2)
+//	if err := p2.JoinGroup(en0, &net.UDPAddr{IP: net.ParseIP("ff02::114")}); err != nil {
+//		// error handling
+//	}
+//
+// Also it is possible for the application to leave or rejoin a
+// multicast group on the network interface.
+//
+//	if err := p.LeaveGroup(en0, &net.UDPAddr{IP: net.ParseIP("ff02::114")}); err != nil {
+//		// error handling
+//	}
+//	if err := p.JoinGroup(en0, &net.UDPAddr{IP: net.ParseIP("ff01::114")}); err != nil {
+//		// error handling
+//	}
+//
+// # Source-specific multicasting
+//
+// An application that uses PacketConn on MLDv2 supported platform is
+// able to join source-specific multicast groups.
+// The application may use JoinSourceSpecificGroup and
+// LeaveSourceSpecificGroup for the operation known as "include" mode,
+//
+//	ssmgroup := net.UDPAddr{IP: net.ParseIP("ff32::8000:9")}
+//	ssmsource := net.UDPAddr{IP: net.ParseIP("fe80::cafe")}
+//	if err := p.JoinSourceSpecificGroup(en0, &ssmgroup, &ssmsource); err != nil {
+//		// error handling
+//	}
+//	if err := p.LeaveSourceSpecificGroup(en0, &ssmgroup, &ssmsource); err != nil {
+//		// error handling
+//	}
+//
+// or JoinGroup, ExcludeSourceSpecificGroup,
+// IncludeSourceSpecificGroup and LeaveGroup for the operation known
+// as "exclude" mode.
+//
+//	exclsource := net.UDPAddr{IP: net.ParseIP("fe80::dead")}
+//	if err := p.JoinGroup(en0, &ssmgroup); err != nil {
+//		// error handling
+//	}
+//	if err := p.ExcludeSourceSpecificGroup(en0, &ssmgroup, &exclsource); err != nil {
+//		// error handling
+//	}
+//	if err := p.LeaveGroup(en0, &ssmgroup); err != nil {
+//		// error handling
+//	}
+//
+// Note that it depends on each platform implementation what happens
+// when an application which runs on MLDv2 unsupported platform uses
+// JoinSourceSpecificGroup and LeaveSourceSpecificGroup.
+// In general the platform tries to fall back to conversations using
+// MLDv1 and starts to listen to multicast traffic.
+// In the fallback case, ExcludeSourceSpecificGroup and
+// IncludeSourceSpecificGroup may return an error.
+package ipv6 // import "golang.org/x/net/ipv6"
+
+// BUG(mikio): This package is not implemented on JS, NaCl and Plan 9.

data/go/vendor/golang.org/x/net/ipv6/endpoint.go

@@ -0,0 +1,127 @@
+// Copyright 2013 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package ipv6
+
+import (
+	"net"
+	"time"
+
+	"golang.org/x/net/internal/socket"
+)
+
+// BUG(mikio): On Windows, the JoinSourceSpecificGroup,
+// LeaveSourceSpecificGroup, ExcludeSourceSpecificGroup and
+// IncludeSourceSpecificGroup methods of PacketConn are not
+// implemented.
+
+// A Conn represents a network endpoint that uses IPv6 transport.
+// It allows to set basic IP-level socket options such as traffic
+// class and hop limit.
+type Conn struct {
+	genericOpt
+}
+
+type genericOpt struct {
+	*socket.Conn
+}
+
+func (c *genericOpt) ok() bool { return c != nil && c.Conn != nil }
+
+// PathMTU returns a path MTU value for the destination associated
+// with the endpoint.
+func (c *Conn) PathMTU() (int, error) {
+	if !c.ok() {
+		return 0, errInvalidConn
+	}
+	so, ok := sockOpts[ssoPathMTU]
+	if !ok {
+		return 0, errNotImplemented
+	}
+	_, mtu, err := so.getMTUInfo(c.Conn)
+	if err != nil {
+		return 0, err
+	}
+	return mtu, nil
+}
+
+// NewConn returns a new Conn.
+func NewConn(c net.Conn) *Conn {
+	cc, _ := socket.NewConn(c)
+	return &Conn{
+		genericOpt: genericOpt{Conn: cc},
+	}
+}
+
+// A PacketConn represents a packet network endpoint that uses IPv6
+// transport. It is used to control several IP-level socket options
+// including IPv6 header manipulation. It also provides datagram
+// based network I/O methods specific to the IPv6 and higher layer
+// protocols such as OSPF, GRE, and UDP.
+type PacketConn struct {
+	genericOpt
+	dgramOpt
+	payloadHandler
+}
+
+type dgramOpt struct {
+	*socket.Conn
+}
+
+func (c *dgramOpt) ok() bool { return c != nil && c.Conn != nil }
+
+// SetControlMessage allows to receive the per packet basis IP-level
+// socket options.
+func (c *PacketConn) SetControlMessage(cf ControlFlags, on bool) error {
+	if !c.payloadHandler.ok() {
+		return errInvalidConn
+	}
+	return setControlMessage(c.dgramOpt.Conn, &c.payloadHandler.rawOpt, cf, on)
+}
+
+// SetDeadline sets the read and write deadlines associated with the
+// endpoint.
+func (c *PacketConn) SetDeadline(t time.Time) error {
+	if !c.payloadHandler.ok() {
+		return errInvalidConn
+	}
+	return c.payloadHandler.SetDeadline(t)
+}
+
+// SetReadDeadline sets the read deadline associated with the
+// endpoint.
+func (c *PacketConn) SetReadDeadline(t time.Time) error {
+	if !c.payloadHandler.ok() {
+		return errInvalidConn
+	}
+	return c.payloadHandler.SetReadDeadline(t)
+}
+
+// SetWriteDeadline sets the write deadline associated with the
+// endpoint.
+func (c *PacketConn) SetWriteDeadline(t time.Time) error {
+	if !c.payloadHandler.ok() {
+		return errInvalidConn
+	}
+	return c.payloadHandler.SetWriteDeadline(t)
+}
+
+// Close closes the endpoint.
+func (c *PacketConn) Close() error {
+	if !c.payloadHandler.ok() {
+		return errInvalidConn
+	}
+	return c.payloadHandler.Close()
+}
+
+// NewPacketConn returns a new PacketConn using c as its underlying
+// transport.
+func NewPacketConn(c net.PacketConn) *PacketConn {
+	cc, _ := socket.NewConn(c.(net.Conn))
+	return &PacketConn{
+		genericOpt:     genericOpt{Conn: cc},
+		dgramOpt:       dgramOpt{Conn: cc},
+		payloadHandler: payloadHandler{PacketConn: c, Conn: cc},
+	}
+}

data/go/vendor/golang.org/x/net/ipv6/genericopt.go

@@ -0,0 +1,56 @@
+// Copyright 2013 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package ipv6
+
+// TrafficClass returns the traffic class field value for outgoing
+// packets.
+func (c *genericOpt) TrafficClass() (int, error) {
+	if !c.ok() {
+		return 0, errInvalidConn
+	}
+	so, ok := sockOpts[ssoTrafficClass]
+	if !ok {
+		return 0, errNotImplemented
+	}
+	return so.GetInt(c.Conn)
+}
+
+// SetTrafficClass sets the traffic class field value for future
+// outgoing packets.
+func (c *genericOpt) SetTrafficClass(tclass int) error {
+	if !c.ok() {
+		return errInvalidConn
+	}
+	so, ok := sockOpts[ssoTrafficClass]
+	if !ok {
+		return errNotImplemented
+	}
+	return so.SetInt(c.Conn, tclass)
+}
+
+// HopLimit returns the hop limit field value for outgoing packets.
+func (c *genericOpt) HopLimit() (int, error) {
+	if !c.ok() {
+		return 0, errInvalidConn
+	}
+	so, ok := sockOpts[ssoHopLimit]
+	if !ok {
+		return 0, errNotImplemented
+	}
+	return so.GetInt(c.Conn)
+}
+
+// SetHopLimit sets the hop limit field value for future outgoing
+// packets.
+func (c *genericOpt) SetHopLimit(hoplim int) error {
+	if !c.ok() {
+		return errInvalidConn
+	}
+	so, ok := sockOpts[ssoHopLimit]
+	if !ok {
+		return errNotImplemented
+	}
+	return so.SetInt(c.Conn, hoplim)
+}

data/go/vendor/golang.org/x/net/ipv6/header.go

@@ -0,0 +1,55 @@
+// Copyright 2014 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package ipv6
+
+import (
+	"encoding/binary"
+	"fmt"
+	"net"
+)
+
+const (
+	Version   = 6  // protocol version
+	HeaderLen = 40 // header length
+)
+
+// A Header represents an IPv6 base header.
+type Header struct {
+	Version      int    // protocol version
+	TrafficClass int    // traffic class
+	FlowLabel    int    // flow label
+	PayloadLen   int    // payload length
+	NextHeader   int    // next header
+	HopLimit     int    // hop limit
+	Src          net.IP // source address
+	Dst          net.IP // destination address
+}
+
+func (h *Header) String() string {
+	if h == nil {
+		return "<nil>"
+	}
+	return fmt.Sprintf("ver=%d tclass=%#x flowlbl=%#x payloadlen=%d nxthdr=%d hoplim=%d src=%v dst=%v", h.Version, h.TrafficClass, h.FlowLabel, h.PayloadLen, h.NextHeader, h.HopLimit, h.Src, h.Dst)
+}
+
+// ParseHeader parses b as an IPv6 base header.
+func ParseHeader(b []byte) (*Header, error) {
+	if len(b) < HeaderLen {
+		return nil, errHeaderTooShort
+	}
+	h := &Header{
+		Version:      int(b[0]) >> 4,
+		TrafficClass: int(b[0]&0x0f)<<4 | int(b[1])>>4,
+		FlowLabel:    int(b[1]&0x0f)<<16 | int(b[2])<<8 | int(b[3]),
+		PayloadLen:   int(binary.BigEndian.Uint16(b[4:6])),
+		NextHeader:   int(b[6]),
+		HopLimit:     int(b[7]),
+	}
+	h.Src = make(net.IP, net.IPv6len)
+	copy(h.Src, b[8:24])
+	h.Dst = make(net.IP, net.IPv6len)
+	copy(h.Dst, b[24:40])
+	return h, nil
+}

data/go/vendor/golang.org/x/net/ipv6/helper.go

@@ -0,0 +1,58 @@
+// Copyright 2013 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package ipv6
+
+import (
+	"errors"
+	"net"
+	"runtime"
+)
+
+var (
+	errInvalidConn     = errors.New("invalid connection")
+	errMissingAddress  = errors.New("missing address")
+	errHeaderTooShort  = errors.New("header too short")
+	errInvalidConnType = errors.New("invalid conn type")
+	errNotImplemented  = errors.New("not implemented on " + runtime.GOOS + "/" + runtime.GOARCH)
+)
+
+func boolint(b bool) int {
+	if b {
+		return 1
+	}
+	return 0
+}
+
+func netAddrToIP16(a net.Addr) net.IP {
+	switch v := a.(type) {
+	case *net.UDPAddr:
+		if ip := v.IP.To16(); ip != nil && ip.To4() == nil {
+			return ip
+		}
+	case *net.IPAddr:
+		if ip := v.IP.To16(); ip != nil && ip.To4() == nil {
+			return ip
+		}
+	}
+	return nil
+}
+
+func opAddr(a net.Addr) net.Addr {
+	switch a.(type) {
+	case *net.TCPAddr:
+		if a == nil {
+			return nil
+		}
+	case *net.UDPAddr:
+		if a == nil {
+			return nil
+		}
+	case *net.IPAddr:
+		if a == nil {
+			return nil
+		}
+	}
+	return a
+}

data/go/vendor/golang.org/x/net/ipv6/iana.go

@@ -0,0 +1,86 @@
+// go generate gen.go
+// Code generated by the command above; DO NOT EDIT.
+
+package ipv6
+
+// Internet Control Message Protocol version 6 (ICMPv6) Parameters, Updated: 2018-03-09
+const (
+	ICMPTypeDestinationUnreachable                ICMPType = 1   // Destination Unreachable
+	ICMPTypePacketTooBig                          ICMPType = 2   // Packet Too Big
+	ICMPTypeTimeExceeded                          ICMPType = 3   // Time Exceeded
+	ICMPTypeParameterProblem                      ICMPType = 4   // Parameter Problem
+	ICMPTypeEchoRequest                           ICMPType = 128 // Echo Request
+	ICMPTypeEchoReply                             ICMPType = 129 // Echo Reply
+	ICMPTypeMulticastListenerQuery                ICMPType = 130 // Multicast Listener Query
+	ICMPTypeMulticastListenerReport               ICMPType = 131 // Multicast Listener Report
+	ICMPTypeMulticastListenerDone                 ICMPType = 132 // Multicast Listener Done
+	ICMPTypeRouterSolicitation                    ICMPType = 133 // Router Solicitation
+	ICMPTypeRouterAdvertisement                   ICMPType = 134 // Router Advertisement
+	ICMPTypeNeighborSolicitation                  ICMPType = 135 // Neighbor Solicitation
+	ICMPTypeNeighborAdvertisement                 ICMPType = 136 // Neighbor Advertisement
+	ICMPTypeRedirect                              ICMPType = 137 // Redirect Message
+	ICMPTypeRouterRenumbering                     ICMPType = 138 // Router Renumbering
+	ICMPTypeNodeInformationQuery                  ICMPType = 139 // ICMP Node Information Query
+	ICMPTypeNodeInformationResponse               ICMPType = 140 // ICMP Node Information Response
+	ICMPTypeInverseNeighborDiscoverySolicitation  ICMPType = 141 // Inverse Neighbor Discovery Solicitation Message
+	ICMPTypeInverseNeighborDiscoveryAdvertisement ICMPType = 142 // Inverse Neighbor Discovery Advertisement Message
+	ICMPTypeVersion2MulticastListenerReport       ICMPType = 143 // Version 2 Multicast Listener Report
+	ICMPTypeHomeAgentAddressDiscoveryRequest      ICMPType = 144 // Home Agent Address Discovery Request Message
+	ICMPTypeHomeAgentAddressDiscoveryReply        ICMPType = 145 // Home Agent Address Discovery Reply Message
+	ICMPTypeMobilePrefixSolicitation              ICMPType = 146 // Mobile Prefix Solicitation
+	ICMPTypeMobilePrefixAdvertisement             ICMPType = 147 // Mobile Prefix Advertisement
+	ICMPTypeCertificationPathSolicitation         ICMPType = 148 // Certification Path Solicitation Message
+	ICMPTypeCertificationPathAdvertisement        ICMPType = 149 // Certification Path Advertisement Message
+	ICMPTypeMulticastRouterAdvertisement          ICMPType = 151 // Multicast Router Advertisement
+	ICMPTypeMulticastRouterSolicitation           ICMPType = 152 // Multicast Router Solicitation
+	ICMPTypeMulticastRouterTermination            ICMPType = 153 // Multicast Router Termination
+	ICMPTypeFMIPv6                                ICMPType = 154 // FMIPv6 Messages
+	ICMPTypeRPLControl                            ICMPType = 155 // RPL Control Message
+	ICMPTypeILNPv6LocatorUpdate                   ICMPType = 156 // ILNPv6 Locator Update Message
+	ICMPTypeDuplicateAddressRequest               ICMPType = 157 // Duplicate Address Request
+	ICMPTypeDuplicateAddressConfirmation          ICMPType = 158 // Duplicate Address Confirmation
+	ICMPTypeMPLControl                            ICMPType = 159 // MPL Control Message
+	ICMPTypeExtendedEchoRequest                   ICMPType = 160 // Extended Echo Request
+	ICMPTypeExtendedEchoReply                     ICMPType = 161 // Extended Echo Reply
+)
+
+// Internet Control Message Protocol version 6 (ICMPv6) Parameters, Updated: 2018-03-09
+var icmpTypes = map[ICMPType]string{
+	1:   "destination unreachable",
+	2:   "packet too big",
+	3:   "time exceeded",
+	4:   "parameter problem",
+	128: "echo request",
+	129: "echo reply",
+	130: "multicast listener query",
+	131: "multicast listener report",
+	132: "multicast listener done",
+	133: "router solicitation",
+	134: "router advertisement",
+	135: "neighbor solicitation",
+	136: "neighbor advertisement",
+	137: "redirect message",
+	138: "router renumbering",
+	139: "icmp node information query",
+	140: "icmp node information response",
+	141: "inverse neighbor discovery solicitation message",
+	142: "inverse neighbor discovery advertisement message",
+	143: "version 2 multicast listener report",
+	144: "home agent address discovery request message",
+	145: "home agent address discovery reply message",
+	146: "mobile prefix solicitation",
+	147: "mobile prefix advertisement",
+	148: "certification path solicitation message",
+	149: "certification path advertisement message",
+	151: "multicast router advertisement",
+	152: "multicast router solicitation",
+	153: "multicast router termination",
+	154: "fmipv6 messages",
+	155: "rpl control message",
+	156: "ilnpv6 locator update message",
+	157: "duplicate address request",
+	158: "duplicate address confirmation",
+	159: "mpl control message",
+	160: "extended echo request",
+	161: "extended echo reply",
+}

data/go/vendor/golang.org/x/net/ipv6/icmp.go

@@ -0,0 +1,60 @@
+// Copyright 2013 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package ipv6
+
+import "golang.org/x/net/internal/iana"
+
+// BUG(mikio): On Windows, methods related to ICMPFilter are not
+// implemented.
+
+// An ICMPType represents a type of ICMP message.
+type ICMPType int
+
+func (typ ICMPType) String() string {
+	s, ok := icmpTypes[typ]
+	if !ok {
+		return "<nil>"
+	}
+	return s
+}
+
+// Protocol returns the ICMPv6 protocol number.
+func (typ ICMPType) Protocol() int {
+	return iana.ProtocolIPv6ICMP
+}
+
+// An ICMPFilter represents an ICMP message filter for incoming
+// packets. The filter belongs to a packet delivery path on a host and
+// it cannot interact with forwarding packets or tunnel-outer packets.
+//
+// Note: RFC 8200 defines a reasonable role model. A node means a
+// device that implements IP. A router means a node that forwards IP
+// packets not explicitly addressed to itself, and a host means a node
+// that is not a router.
+type ICMPFilter struct {
+	icmpv6Filter
+}
+
+// Accept accepts incoming ICMP packets including the type field value
+// typ.
+func (f *ICMPFilter) Accept(typ ICMPType) {
+	f.accept(typ)
+}
+
+// Block blocks incoming ICMP packets including the type field value
+// typ.
+func (f *ICMPFilter) Block(typ ICMPType) {
+	f.block(typ)
+}
+
+// SetAll sets the filter action to the filter.
+func (f *ICMPFilter) SetAll(block bool) {
+	f.setAll(block)
+}
+
+// WillBlock reports whether the ICMP type will be blocked.
+func (f *ICMPFilter) WillBlock(typ ICMPType) bool {
+	return f.willBlock(typ)
+}