passenger 6.0.26 → 6.1.0

data/src/cxx_supportlib/vendor-modified/boost/asio/connect_pipe.hpp

@@ -1,85 +0,0 @@
-//
-// connect_pipe.hpp
-// ~~~~~~~~~~~~~~~~
-//
-// Copyright (c) 2003-2024 Christopher M. Kohlhoff (chris at kohlhoff dot com)
-//
-// Distributed under the Boost Software License, Version 1.0. (See accompanying
-// file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
-//
-
-#ifndef BOOST_ASIO_CONNECT_PIPE_HPP
-#define BOOST_ASIO_CONNECT_PIPE_HPP
-
-#if defined(_MSC_VER) && (_MSC_VER >= 1200)
-# pragma once
-#endif // defined(_MSC_VER) && (_MSC_VER >= 1200)
-
-#include <boost/asio/detail/config.hpp>
-
-#if defined(BOOST_ASIO_HAS_PIPE) \
-  || defined(GENERATING_DOCUMENTATION)
-
-#include <boost/asio/basic_readable_pipe.hpp>
-#include <boost/asio/basic_writable_pipe.hpp>
-#include <boost/asio/error.hpp>
-
-#include <boost/asio/detail/push_options.hpp>
-
-namespace boost {
-namespace asio {
-namespace detail {
-
-#if defined(BOOST_ASIO_HAS_IOCP)
-typedef HANDLE native_pipe_handle;
-#else // defined(BOOST_ASIO_HAS_IOCP)
-typedef int native_pipe_handle;
-#endif // defined(BOOST_ASIO_HAS_IOCP)
-
-BOOST_ASIO_DECL void create_pipe(native_pipe_handle p[2],
-    boost::system::error_code& ec);
-
-BOOST_ASIO_DECL void close_pipe(native_pipe_handle p);
-
-} // namespace detail
-
-/// Connect two pipe ends using an anonymous pipe.
-/**
- * @param read_end The read end of the pipe.
- *
- * @param write_end The write end of the pipe.
- *
- * @throws boost::system::system_error Thrown on failure.
- */
-template <typename Executor1, typename Executor2>
-void connect_pipe(basic_readable_pipe<Executor1>& read_end,
-    basic_writable_pipe<Executor2>& write_end);
-
-/// Connect two pipe ends using an anonymous pipe.
-/**
- * @param read_end The read end of the pipe.
- *
- * @param write_end The write end of the pipe.
- *
- * @throws boost::system::system_error Thrown on failure.
- *
- * @param ec Set to indicate what error occurred, if any.
- */
-template <typename Executor1, typename Executor2>
-BOOST_ASIO_SYNC_OP_VOID connect_pipe(basic_readable_pipe<Executor1>& read_end,
-    basic_writable_pipe<Executor2>& write_end, boost::system::error_code& ec);
-
-} // namespace asio
-} // namespace boost
-
-#include <boost/asio/detail/pop_options.hpp>
-
-#include <boost/asio/impl/connect_pipe.hpp>
-#if defined(BOOST_ASIO_HEADER_ONLY)
-# include <boost/asio/impl/connect_pipe.ipp>
-#endif // defined(BOOST_ASIO_HEADER_ONLY)
-
-#endif // defined(BOOST_ASIO_HAS_PIPE)
-       //   || defined(GENERATING_DOCUMENTATION)
-
-#endif // BOOST_ASIO_CONNECT_PIPE_HPP

data/src/cxx_supportlib/vendor-modified/boost/asio/consign.hpp

@@ -1,77 +0,0 @@
-//
-// consign.hpp
-// ~~~~~~~~~~~
-//
-// Copyright (c) 2003-2024 Christopher M. Kohlhoff (chris at kohlhoff dot com)
-//
-// Distributed under the Boost Software License, Version 1.0. (See accompanying
-// file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
-//
-
-#ifndef BOOST_ASIO_CONSIGN_HPP
-#define BOOST_ASIO_CONSIGN_HPP
-
-#if defined(_MSC_VER) && (_MSC_VER >= 1200)
-# pragma once
-#endif // defined(_MSC_VER) && (_MSC_VER >= 1200)
-
-#include <boost/asio/detail/config.hpp>
-#include <tuple>
-#include <boost/asio/detail/type_traits.hpp>
-
-#include <boost/asio/detail/push_options.hpp>
-
-namespace boost {
-namespace asio {
-
-/// Completion token type used to specify that the completion handler should
-/// carry additional values along with it.
-/**
- * This completion token adapter is typically used to keep at least one copy of
- * an object, such as a smart pointer, alive until the completion handler is
- * called.
- */
-template <typename CompletionToken, typename... Values>
-class consign_t
-{
-public:
-  /// Constructor.
-  template <typename T, typename... V>
-  constexpr explicit consign_t(T&& completion_token, V&&... values)
-    : token_(static_cast<T&&>(completion_token)),
-      values_(static_cast<V&&>(values)...)
-  {
-  }
-
-#if defined(GENERATING_DOCUMENTATION)
-private:
-#endif // defined(GENERATING_DOCUMENTATION)
-  CompletionToken token_;
-  std::tuple<Values...> values_;
-};
-
-/// Completion token adapter used to specify that the completion handler should
-/// carry additional values along with it.
-/**
- * This completion token adapter is typically used to keep at least one copy of
- * an object, such as a smart pointer, alive until the completion handler is
- * called.
- */
-template <typename CompletionToken, typename... Values>
-BOOST_ASIO_NODISCARD inline constexpr
-consign_t<decay_t<CompletionToken>, decay_t<Values>...>
-consign(CompletionToken&& completion_token, Values&&... values)
-{
-  return consign_t<decay_t<CompletionToken>, decay_t<Values>...>(
-      static_cast<CompletionToken&&>(completion_token),
-      static_cast<Values&&>(values)...);
-}
-
-} // namespace asio
-} // namespace boost
-
-#include <boost/asio/detail/pop_options.hpp>
-
-#include <boost/asio/impl/consign.hpp>
-
-#endif // BOOST_ASIO_CONSIGN_HPP

data/src/cxx_supportlib/vendor-modified/boost/asio/coroutine.hpp

@@ -1,330 +0,0 @@
-//
-// coroutine.hpp
-// ~~~~~~~~~~~~~
-//
-// Copyright (c) 2003-2024 Christopher M. Kohlhoff (chris at kohlhoff dot com)
-//
-// Distributed under the Boost Software License, Version 1.0. (See accompanying
-// file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
-//
-
-#ifndef BOOST_ASIO_COROUTINE_HPP
-#define BOOST_ASIO_COROUTINE_HPP
-
-namespace boost {
-namespace asio {
-namespace detail {
-
-class coroutine_ref;
-
-} // namespace detail
-
-/// Provides support for implementing stackless coroutines.
-/**
- * The @c coroutine class may be used to implement stackless coroutines. The
- * class itself is used to store the current state of the coroutine.
- *
- * Coroutines are copy-constructible and assignable, and the space overhead is
- * a single int. They can be used as a base class:
- *
- * @code class session : coroutine
- * {
- *   ...
- * }; @endcode
- *
- * or as a data member:
- *
- * @code class session
- * {
- *   ...
- *   coroutine coro_;
- * }; @endcode
- *
- * or even bound in as a function argument using lambdas or @c bind(). The
- * important thing is that as the application maintains a copy of the object
- * for as long as the coroutine must be kept alive.
- *
- * @par Pseudo-keywords
- *
- * A coroutine is used in conjunction with certain "pseudo-keywords", which
- * are implemented as macros. These macros are defined by a header file:
- *
- * @code #include <boost/asio/yield.hpp>@endcode
- *
- * and may conversely be undefined as follows:
- *
- * @code #include <boost/asio/unyield.hpp>@endcode
- *
- * <b>reenter</b>
- *
- * The @c reenter macro is used to define the body of a coroutine. It takes a
- * single argument: a pointer or reference to a coroutine object. For example,
- * if the base class is a coroutine object you may write:
- *
- * @code reenter (this)
- * {
- *   ... coroutine body ...
- * } @endcode
- *
- * and if a data member or other variable you can write:
- *
- * @code reenter (coro_)
- * {
- *   ... coroutine body ...
- * } @endcode
- *
- * When @c reenter is executed at runtime, control jumps to the location of the
- * last @c yield or @c fork.
- *
- * The coroutine body may also be a single statement, such as:
- *
- * @code reenter (this) for (;;)
- * {
- *   ...
- * } @endcode
- *
- * @b Limitation: The @c reenter macro is implemented using a switch. This
- * means that you must take care when using local variables within the
- * coroutine body. The local variable is not allowed in a position where
- * reentering the coroutine could bypass the variable definition.
- *
- * <b>yield <em>statement</em></b>
- *
- * This form of the @c yield keyword is often used with asynchronous operations:
- *
- * @code yield socket_->async_read_some(buffer(*buffer_), *this); @endcode
- *
- * This divides into four logical steps:
- *
- * @li @c yield saves the current state of the coroutine.
- * @li The statement initiates the asynchronous operation.
- * @li The resume point is defined immediately following the statement.
- * @li Control is transferred to the end of the coroutine body.
- *
- * When the asynchronous operation completes, the function object is invoked
- * and @c reenter causes control to transfer to the resume point. It is
- * important to remember to carry the coroutine state forward with the
- * asynchronous operation. In the above snippet, the current class is a
- * function object object with a coroutine object as base class or data member.
- *
- * The statement may also be a compound statement, and this permits us to
- * define local variables with limited scope:
- *
- * @code yield
- * {
- *   mutable_buffers_1 b = buffer(*buffer_);
- *   socket_->async_read_some(b, *this);
- * } @endcode
- *
- * <b>yield return <em>expression</em> ;</b>
- *
- * This form of @c yield is often used in generators or coroutine-based parsers.
- * For example, the function object:
- *
- * @code struct interleave : coroutine
- * {
- *   istream& is1;
- *   istream& is2;
- *   char operator()(char c)
- *   {
- *     reenter (this) for (;;)
- *     {
- *       yield return is1.get();
- *       yield return is2.get();
- *     }
- *   }
- * }; @endcode
- *
- * defines a trivial coroutine that interleaves the characters from two input
- * streams.
- *
- * This type of @c yield divides into three logical steps:
- *
- * @li @c yield saves the current state of the coroutine.
- * @li The resume point is defined immediately following the semicolon.
- * @li The value of the expression is returned from the function.
- *
- * <b>yield ;</b>
- *
- * This form of @c yield is equivalent to the following steps:
- *
- * @li @c yield saves the current state of the coroutine.
- * @li The resume point is defined immediately following the semicolon.
- * @li Control is transferred to the end of the coroutine body.
- *
- * This form might be applied when coroutines are used for cooperative
- * threading and scheduling is explicitly managed. For example:
- *
- * @code struct task : coroutine
- * {
- *   ...
- *   void operator()()
- *   {
- *     reenter (this)
- *     {
- *       while (... not finished ...)
- *       {
- *         ... do something ...
- *         yield;
- *         ... do some more ...
- *         yield;
- *       }
- *     }
- *   }
- *   ...
- * };
- * ...
- * task t1, t2;
- * for (;;)
- * {
- *   t1();
- *   t2();
- * } @endcode
- *
- * <b>yield break ;</b>
- *
- * The final form of @c yield is used to explicitly terminate the coroutine.
- * This form is comprised of two steps:
- *
- * @li @c yield sets the coroutine state to indicate termination.
- * @li Control is transferred to the end of the coroutine body.
- *
- * Once terminated, calls to is_complete() return true and the coroutine cannot
- * be reentered.
- *
- * Note that a coroutine may also be implicitly terminated if the coroutine
- * body is exited without a yield, e.g. by return, throw or by running to the
- * end of the body.
- *
- * <b>fork <em>statement</em></b>
- *
- * The @c fork pseudo-keyword is used when "forking" a coroutine, i.e. splitting
- * it into two (or more) copies. One use of @c fork is in a server, where a new
- * coroutine is created to handle each client connection:
- *
- * @code reenter (this)
- * {
- *   do
- *   {
- *     socket_.reset(new tcp::socket(my_context_));
- *     yield acceptor->async_accept(*socket_, *this);
- *     fork server(*this)();
- *   } while (is_parent());
- *   ... client-specific handling follows ...
- * } @endcode
- *
- * The logical steps involved in a @c fork are:
- *
- * @li @c fork saves the current state of the coroutine.
- * @li The statement creates a copy of the coroutine and either executes it
- *     immediately or schedules it for later execution.
- * @li The resume point is defined immediately following the semicolon.
- * @li For the "parent", control immediately continues from the next line.
- *
- * The functions is_parent() and is_child() can be used to differentiate
- * between parent and child. You would use these functions to alter subsequent
- * control flow.
- *
- * Note that @c fork doesn't do the actual forking by itself. It is the
- * application's responsibility to create a clone of the coroutine and call it.
- * The clone can be called immediately, as above, or scheduled for delayed
- * execution using something like boost::asio::post().
- *
- * @par Alternate macro names
- *
- * If preferred, an application can use macro names that follow a more typical
- * naming convention, rather than the pseudo-keywords. These are:
- *
- * @li @c BOOST_ASIO_CORO_REENTER instead of @c reenter
- * @li @c BOOST_ASIO_CORO_YIELD instead of @c yield
- * @li @c BOOST_ASIO_CORO_FORK instead of @c fork
- */
-class coroutine
-{
-public:
-  /// Constructs a coroutine in its initial state.
-  coroutine() : value_(0) {}
-
-  /// Returns true if the coroutine is the child of a fork.
-  bool is_child() const { return value_ < 0; }
-
-  /// Returns true if the coroutine is the parent of a fork.
-  bool is_parent() const { return !is_child(); }
-
-  /// Returns true if the coroutine has reached its terminal state.
-  bool is_complete() const { return value_ == -1; }
-
-private:
-  friend class detail::coroutine_ref;
-  int value_;
-};
-
-namespace detail {
-
-class coroutine_ref
-{
-public:
-  coroutine_ref(coroutine& c) : value_(c.value_), modified_(false) {}
-  coroutine_ref(coroutine* c) : value_(c->value_), modified_(false) {}
-  coroutine_ref(const coroutine_ref&) = default;
-  ~coroutine_ref() { if (!modified_) value_ = -1; }
-  operator int() const { return value_; }
-  int& operator=(int v) { modified_ = true; return value_ = v; }
-private:
-  void operator=(const coroutine_ref&);
-  int& value_;
-  bool modified_;
-};
-
-} // namespace detail
-} // namespace asio
-} // namespace boost
-
-#define BOOST_ASIO_CORO_REENTER(c) \
-  switch (::boost::asio::detail::coroutine_ref _coro_value = c) \
-    case -1: if (_coro_value) \
-    { \
-      goto terminate_coroutine; \
-      terminate_coroutine: \
-      _coro_value = -1; \
-      goto bail_out_of_coroutine; \
-      bail_out_of_coroutine: \
-      break; \
-    } \
-    else /* fall-through */ case 0:
-
-#define BOOST_ASIO_CORO_YIELD_IMPL(n) \
-  for (_coro_value = (n);;) \
-    if (_coro_value == 0) \
-    { \
-      case (n): ; \
-      break; \
-    } \
-    else \
-      switch (_coro_value ? 0 : 1) \
-        for (;;) \
-          /* fall-through */ case -1: if (_coro_value) \
-            goto terminate_coroutine; \
-          else for (;;) \
-            /* fall-through */ case 1: if (_coro_value) \
-              goto bail_out_of_coroutine; \
-            else /* fall-through */ case 0:
-
-#define BOOST_ASIO_CORO_FORK_IMPL(n) \
-  for (_coro_value = -(n);; _coro_value = (n)) \
-    if (_coro_value == (n)) \
-    { \
-      case -(n): ; \
-      break; \
-    } \
-    else
-
-#if defined(_MSC_VER)
-# define BOOST_ASIO_CORO_YIELD BOOST_ASIO_CORO_YIELD_IMPL(__COUNTER__ + 1)
-# define BOOST_ASIO_CORO_FORK BOOST_ASIO_CORO_FORK_IMPL(__COUNTER__ + 1)
-#else // defined(_MSC_VER)
-# define BOOST_ASIO_CORO_YIELD BOOST_ASIO_CORO_YIELD_IMPL(__LINE__)
-# define BOOST_ASIO_CORO_FORK BOOST_ASIO_CORO_FORK_IMPL(__LINE__)
-#endif // defined(_MSC_VER)
-
-#endif // BOOST_ASIO_COROUTINE_HPP

data/src/cxx_supportlib/vendor-modified/boost/asio/deadline_timer.hpp

@@ -1,40 +0,0 @@
-//
-// deadline_timer.hpp
-// ~~~~~~~~~~~~~~~~~~
-//
-// Copyright (c) 2003-2024 Christopher M. Kohlhoff (chris at kohlhoff dot com)
-//
-// Distributed under the Boost Software License, Version 1.0. (See accompanying
-// file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
-//
-
-#ifndef BOOST_ASIO_DEADLINE_TIMER_HPP
-#define BOOST_ASIO_DEADLINE_TIMER_HPP
-
-#if defined(_MSC_VER) && (_MSC_VER >= 1200)
-# pragma once
-#endif // defined(_MSC_VER) && (_MSC_VER >= 1200)
-
-#include <boost/asio/detail/config.hpp>
-
-#if defined(BOOST_ASIO_HAS_BOOST_DATE_TIME) \
-  || defined(GENERATING_DOCUMENTATION)
-
-#include <boost/asio/detail/socket_types.hpp> // Must come before posix_time.
-#include <boost/asio/basic_deadline_timer.hpp>
-
-#include <boost/date_time/posix_time/posix_time_types.hpp>
-
-namespace boost {
-namespace asio {
-
-/// Typedef for the typical usage of timer. Uses a UTC clock.
-typedef basic_deadline_timer<boost::posix_time::ptime> deadline_timer;
-
-} // namespace asio
-} // namespace boost
-
-#endif // defined(BOOST_ASIO_HAS_BOOST_DATE_TIME)
-       // || defined(GENERATING_DOCUMENTATION)
-
-#endif // BOOST_ASIO_DEADLINE_TIMER_HPP

data/src/cxx_supportlib/vendor-modified/boost/asio/default_completion_token.hpp

@@ -1,91 +0,0 @@
-//
-// default_completion_token.hpp
-// ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-//
-// Copyright (c) 2003-2024 Christopher M. Kohlhoff (chris at kohlhoff dot com)
-//
-// Distributed under the Boost Software License, Version 1.0. (See accompanying
-// file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
-//
-
-#ifndef BOOST_ASIO_DEFAULT_COMPLETION_TOKEN_HPP
-#define BOOST_ASIO_DEFAULT_COMPLETION_TOKEN_HPP
-
-#if defined(_MSC_VER) && (_MSC_VER >= 1200)
-# pragma once
-#endif // defined(_MSC_VER) && (_MSC_VER >= 1200)
-
-#include <boost/asio/detail/config.hpp>
-#include <boost/asio/detail/type_traits.hpp>
-
-#include <boost/asio/detail/push_options.hpp>
-
-namespace boost {
-namespace asio {
-
-class deferred_t;
-
-namespace detail {
-
-template <typename T, typename = void>
-struct default_completion_token_impl
-{
-  typedef deferred_t type;
-};
-
-template <typename T>
-struct default_completion_token_impl<T,
-    void_t<typename T::default_completion_token_type>
-  >
-{
-  typedef typename T::default_completion_token_type type;
-};
-
-} // namespace detail
-
-#if defined(GENERATING_DOCUMENTATION)
-
-/// Traits type used to determine the default completion token type associated
-/// with a type (such as an executor).
-/**
- * A program may specialise this traits type if the @c T template parameter in
- * the specialisation is a user-defined type.
- *
- * Specialisations of this trait may provide a nested typedef @c type, which is
- * a default-constructible completion token type.
- *
- * If not otherwise specialised, the default completion token type is
- * boost::asio::deferred_t.
- */
-template <typename T>
-struct default_completion_token
-{
-  /// If @c T has a nested type @c default_completion_token_type,
-  /// <tt>T::default_completion_token_type</tt>. Otherwise the typedef @c type
-  /// is boost::asio::deferred_t.
-  typedef see_below type;
-};
-#else
-template <typename T>
-struct default_completion_token
-  : detail::default_completion_token_impl<T>
-{
-};
-#endif
-
-template <typename T>
-using default_completion_token_t = typename default_completion_token<T>::type;
-
-#define BOOST_ASIO_DEFAULT_COMPLETION_TOKEN_TYPE(e) \
-  = typename ::boost::asio::default_completion_token<e>::type
-#define BOOST_ASIO_DEFAULT_COMPLETION_TOKEN(e) \
-  = typename ::boost::asio::default_completion_token<e>::type()
-
-} // namespace asio
-} // namespace boost
-
-#include <boost/asio/detail/pop_options.hpp>
-
-#include <boost/asio/deferred.hpp>
-
-#endif // BOOST_ASIO_DEFAULT_COMPLETION_TOKEN_HPP