passenger 6.0.26 → 6.1.0

data/src/cxx_supportlib/vendor-modified/websocketpp/websocketpp/processors/hybi13.hpp

@@ -1,1072 +0,0 @@
-/*
- * Copyright (c) 2015, Peter Thorson. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of the WebSocket++ Project nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL PETER THORSON BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- */
-
-#ifndef WEBSOCKETPP_PROCESSOR_HYBI13_HPP
-#define WEBSOCKETPP_PROCESSOR_HYBI13_HPP
-
-#include <websocketpp/processors/processor.hpp>
-
-#include <websocketpp/frame.hpp>
-#include <websocketpp/http/constants.hpp>
-
-#include <websocketpp/utf8_validator.hpp>
-#include <websocketpp/sha1/sha1.hpp>
-#include <websocketpp/base64/base64.hpp>
-
-#include <websocketpp/common/network.hpp>
-#include <websocketpp/common/platforms.hpp>
-
-#include <algorithm>
-#include <cassert>
-#include <string>
-#include <vector>
-#include <utility>
-
-namespace websocketpp {
-namespace processor {
-
-/// Processor for Hybi version 13 (RFC6455)
-template <typename config>
-class hybi13 : public processor<config> {
-public:
-    typedef processor<config> base;
-
-    typedef typename config::request_type request_type;
-    typedef typename config::response_type response_type;
-
-    typedef typename config::message_type message_type;
-    typedef typename message_type::ptr message_ptr;
-
-    typedef typename config::con_msg_manager_type msg_manager_type;
-    typedef typename msg_manager_type::ptr msg_manager_ptr;
-    typedef typename config::rng_type rng_type;
-
-    typedef typename config::permessage_deflate_type permessage_deflate_type;
-
-    typedef std::pair<lib::error_code,std::string> err_str_pair;
-
-    explicit hybi13(bool secure, bool p_is_server, msg_manager_ptr manager, rng_type& rng)
-      : processor<config>(secure, p_is_server)
-      , m_msg_manager(manager)
-      , m_rng(rng)
-    {
-        reset_headers();
-    }
-
-    int get_version() const {
-        return 13;
-    }
-
-    bool has_permessage_deflate() const {
-        return m_permessage_deflate.is_implemented();
-    }
-
-    err_str_pair negotiate_extensions(request_type const & request) {
-        return negotiate_extensions_helper(request);
-    }
-
-    err_str_pair negotiate_extensions(response_type const & response) {
-        return negotiate_extensions_helper(response);
-    }
-
-    /// Extension negotiation helper function
-    /**
-     * This exists mostly because the code for requests and responses is
-     * identical and I can't have virtual template methods.
-     */
-    template <typename header_type>
-    err_str_pair negotiate_extensions_helper(header_type const & header) {
-        err_str_pair ret;
-
-        // Respect blanket disabling of all extensions and don't even parse
-        // the extension header
-        if (!config::enable_extensions) {
-            ret.first = make_error_code(error::extensions_disabled);
-            return ret;
-        }
-
-        http::parameter_list p;
-
-        bool error = header.get_header_as_plist("Sec-WebSocket-Extensions",p);
-
-        if (error) {
-            ret.first = make_error_code(error::extension_parse_error);
-            return ret;
-        }
-
-        // If there are no extensions parsed then we are done!
-        if (p.size() == 0) {
-            return ret;
-        }
-
-        http::parameter_list::const_iterator it;
-
-        // look through the list of extension requests to find the first
-        // one that we can accept.
-        if (m_permessage_deflate.is_implemented()) {
-            err_str_pair neg_ret;
-            for (it = p.begin(); it != p.end(); ++it) {
-                // not a permessage-deflate extension request, ignore
-                if (it->first != "permessage-deflate") {
-                    continue;
-                }
-
-                // if we have already successfully negotiated this extension
-                // then skip any other requests to negotiate the same one
-                // with different parameters
-                if (m_permessage_deflate.is_enabled()) {
-                    continue;
-                }
-
-                // attempt to negotiate this offer
-                neg_ret = m_permessage_deflate.negotiate(it->second);
-
-                if (neg_ret.first) {
-                    // negotiation offer failed. Do nothing. We will continue
-                    // searching for a permessage-deflate config that succeeds
-                    continue;
-                }
-
-                // Negotiation tentatively succeeded
-
-                // Actually try to initialize the extension before we
-                // deem negotiation complete
-                lib::error_code ec = m_permessage_deflate.init(base::m_server);
-
-                if (ec) {
-                    // Negotiation succeeded but initialization failed this is
-                    // an error that should stop negotiation of permessage
-                    // deflate. Return the reason for the init failure
-
-                    ret.first = ec;
-                    break;
-                } else {
-                    // Successfully initialized, push the negotiated response into
-                    // the reply and stop looking for additional permessage-deflate
-                    // extensions
-                    ret.second += neg_ret.second;
-                    break;
-                }
-            }
-        }
-
-        // support for future extensions would go here. Should check the value of
-        // ret.first before continuing. Might need to consider whether failure of
-        // negotiation of an earlier extension should stop negotiation of subsequent
-        // ones
-
-        return ret;
-    }
-
-    lib::error_code validate_handshake(request_type const & r) const {
-        if (r.get_method() != "GET") {
-            return make_error_code(error::invalid_http_method);
-        }
-
-        if (r.get_version() != "HTTP/1.1") {
-            return make_error_code(error::invalid_http_version);
-        }
-
-        // required headers
-        // Host is required by HTTP/1.1
-        // Connection is required by is_websocket_handshake
-        // Upgrade is required by is_websocket_handshake
-        if (r.get_header("Sec-WebSocket-Key").empty()) {
-            return make_error_code(error::missing_required_header);
-        }
-
-        return lib::error_code();
-    }
-
-    /* TODO: the 'subprotocol' parameter may need to be expanded into a more
-     * generic struct if other user input parameters to the processed handshake
-     * are found.
-     */
-    lib::error_code process_handshake(request_type const & request,
-        std::string const & subprotocol, response_type & response) const
-    {
-        std::string server_key = request.get_header("Sec-WebSocket-Key");
-
-        lib::error_code ec = process_handshake_key(server_key);
-
-        if (ec) {
-            return ec;
-        }
-
-        response.replace_header("Sec-WebSocket-Accept",server_key);
-        response.append_header("Upgrade",constants::upgrade_token);
-        response.append_header("Connection",constants::connection_token);
-
-        if (!subprotocol.empty()) {
-            response.replace_header("Sec-WebSocket-Protocol",subprotocol);
-        }
-
-        return lib::error_code();
-    }
-
-    /// Fill in a set of request headers for a client connection request
-    /**
-     * @param [out] req  Set of headers to fill in
-     * @param [in] uri The uri being connected to
-     * @param [in] subprotocols The list of subprotocols to request
-     */
-    lib::error_code client_handshake_request(request_type & req, uri_ptr
-        uri, std::vector<std::string> const & subprotocols) const
-    {
-        req.set_method("GET");
-        req.set_uri(uri->get_resource());
-        req.set_version("HTTP/1.1");
-
-        req.append_header("Upgrade","websocket");
-        req.append_header("Connection","Upgrade");
-        req.replace_header("Sec-WebSocket-Version","13");
-        req.replace_header("Host",uri->get_host_port());
-
-        if (!subprotocols.empty()) {
-            std::ostringstream result;
-            std::vector<std::string>::const_iterator it = subprotocols.begin();
-            result << *it++;
-            while (it != subprotocols.end()) {
-                result << ", " << *it++;
-            }
-
-            req.replace_header("Sec-WebSocket-Protocol",result.str());
-        }
-
-        // Generate handshake key
-        frame::uint32_converter conv;
-        unsigned char raw_key[16];
-
-        for (int i = 0; i < 4; i++) {
-            conv.i = m_rng();
-            std::copy(conv.c,conv.c+4,&raw_key[i*4]);
-        }
-
-        req.replace_header("Sec-WebSocket-Key",base64_encode(raw_key, 16));
-
-        if (m_permessage_deflate.is_implemented()) {
-            std::string offer = m_permessage_deflate.generate_offer();
-            if (!offer.empty()) {
-                req.replace_header("Sec-WebSocket-Extensions",offer);
-            }
-        }
-
-        return lib::error_code();
-    }
-
-    /// Validate the server's response to an outgoing handshake request
-    /**
-     * @param req The original request sent
-     * @param res The reponse to generate
-     * @return An error code, 0 on success, non-zero for other errors
-     */
-    lib::error_code validate_server_handshake_response(request_type const & req,
-        response_type& res) const
-    {
-        // A valid response has an HTTP 101 switching protocols code
-        if (res.get_status_code() != http::status_code::switching_protocols) {
-            return error::make_error_code(error::invalid_http_status);
-        }
-
-        // And the upgrade token in an upgrade header
-        std::string const & upgrade_header = res.get_header("Upgrade");
-        if (utility::ci_find_substr(upgrade_header, constants::upgrade_token,
-            sizeof(constants::upgrade_token)-1) == upgrade_header.end())
-        {
-            return error::make_error_code(error::missing_required_header);
-        }
-
-        // And the websocket token in the connection header
-        std::string const & con_header = res.get_header("Connection");
-        if (utility::ci_find_substr(con_header, constants::connection_token,
-            sizeof(constants::connection_token)-1) == con_header.end())
-        {
-            return error::make_error_code(error::missing_required_header);
-        }
-
-        // And has a valid Sec-WebSocket-Accept value
-        std::string key = req.get_header("Sec-WebSocket-Key");
-        lib::error_code ec = process_handshake_key(key);
-
-        if (ec || key != res.get_header("Sec-WebSocket-Accept")) {
-            return error::make_error_code(error::missing_required_header);
-        }
-
-        // check extensions
-
-        return lib::error_code();
-    }
-
-    std::string get_raw(response_type const & res) const {
-        return res.raw();
-    }
-
-    std::string const & get_origin(request_type const & r) const {
-        return r.get_header("Origin");
-    }
-
-    lib::error_code extract_subprotocols(request_type const & req,
-        std::vector<std::string> & subprotocol_list)
-    {
-        if (!req.get_header("Sec-WebSocket-Protocol").empty()) {
-            http::parameter_list p;
-
-             if (!req.get_header_as_plist("Sec-WebSocket-Protocol",p)) {
-                 http::parameter_list::const_iterator it;
-
-                 for (it = p.begin(); it != p.end(); ++it) {
-                     subprotocol_list.push_back(it->first);
-                 }
-             } else {
-                 return error::make_error_code(error::subprotocol_parse_error);
-             }
-        }
-        return lib::error_code();
-    }
-
-    uri_ptr get_uri(request_type const & request) const {
-        return get_uri_from_host(request,(base::m_secure ? "wss" : "ws"));
-    }
-
-    /// Process new websocket connection bytes
-    /**
-     *
-     * Hybi 13 data streams represent a series of variable length frames. Each
-     * frame is made up of a series of fixed length fields. The lengths of later
-     * fields are contained in earlier fields. The first field length is fixed
-     * by the spec.
-     *
-     * This processor represents a state machine that keeps track of what field
-     * is presently being read and how many more bytes are needed to complete it
-     *
-     *
-     *
-     *
-     * Read two header bytes
-     *   Extract full frame length.
-     *   Read extra header bytes
-     * Validate frame header (including extension validate)
-     * Read extension data into extension message state object
-     * Read payload data into payload
-     *
-     * @param buf Input buffer
-     *
-     * @param len Length of input buffer
-     *
-     * @return Number of bytes processed or zero on error
-     */
-    size_t consume(uint8_t * buf, size_t len, lib::error_code & ec) {
-        size_t p = 0;
-
-        ec = lib::error_code();
-
-        //std::cout << "consume: " << utility::to_hex(buf,len) << std::endl;
-
-        // Loop while we don't have a message ready and we still have bytes
-        // left to process.
-        while (m_state != READY && m_state != FATAL_ERROR &&
-               (p < len || m_bytes_needed == 0))
-        {
-            if (m_state == HEADER_BASIC) {
-                p += this->copy_basic_header_bytes(buf+p,len-p);
-
-                if (m_bytes_needed > 0) {
-                    continue;
-                }
-
-                ec = this->validate_incoming_basic_header(
-                    m_basic_header, base::m_server, !m_data_msg.msg_ptr
-                );
-                if (ec) {break;}
-
-                // extract full header size and adjust consume state accordingly
-                m_state = HEADER_EXTENDED;
-                m_cursor = 0;
-                m_bytes_needed = frame::get_header_len(m_basic_header) -
-                    frame::BASIC_HEADER_LENGTH;
-            } else if (m_state == HEADER_EXTENDED) {
-                p += this->copy_extended_header_bytes(buf+p,len-p);
-
-                if (m_bytes_needed > 0) {
-                    continue;
-                }
-
-                ec = validate_incoming_extended_header(m_basic_header,m_extended_header);
-                if (ec){break;}
-
-                m_state = APPLICATION;
-                m_bytes_needed = static_cast<size_t>(get_payload_size(m_basic_header,m_extended_header));
-
-                // check if this frame is the start of a new message and set up
-                // the appropriate message metadata.
-                frame::opcode::value op = frame::get_opcode(m_basic_header);
-
-                // TODO: get_message failure conditions
-
-                if (frame::opcode::is_control(op)) {
-                    m_control_msg = msg_metadata(
-                        m_msg_manager->get_message(op,m_bytes_needed),
-                        frame::get_masking_key(m_basic_header,m_extended_header)
-                    );
-
-                    m_current_msg = &m_control_msg;
-                } else {
-                    if (!m_data_msg.msg_ptr) {
-                        if (m_bytes_needed > base::m_max_message_size) {
-                            ec = make_error_code(error::message_too_big);
-                            break;
-                        }
-
-                        m_data_msg = msg_metadata(
-                            m_msg_manager->get_message(op,m_bytes_needed),
-                            frame::get_masking_key(m_basic_header,m_extended_header)
-                        );
-
-                        if (m_permessage_deflate.is_enabled()) {
-                            m_data_msg.msg_ptr->set_compressed(frame::get_rsv1(m_basic_header));
-                        }
-                    } else {
-                        // Fetch the underlying payload buffer from the data message we
-                        // are writing into.
-                        std::string & out = m_data_msg.msg_ptr->get_raw_payload();
-
-                        if (out.size() + m_bytes_needed > base::m_max_message_size) {
-                            ec = make_error_code(error::message_too_big);
-                            break;
-                        }
-
-                        // Each frame starts a new masking key. All other state
-                        // remains between frames.
-                        m_data_msg.prepared_key = prepare_masking_key(
-                            frame::get_masking_key(
-                                m_basic_header,
-                                m_extended_header
-                            )
-                        );
-
-                        out.reserve(out.size() + m_bytes_needed);
-                    }
-                    m_current_msg = &m_data_msg;
-                }
-            } else if (m_state == EXTENSION) {
-                m_state = APPLICATION;
-            } else if (m_state == APPLICATION) {
-                size_t bytes_to_process = (std::min)(m_bytes_needed,len-p);
-
-                if (bytes_to_process > 0) {
-                    p += this->process_payload_bytes(buf+p,bytes_to_process,ec);
-
-                    if (ec) {break;}
-                }
-
-                if (m_bytes_needed > 0) {
-                    continue;
-                }
-
-                // If this was the last frame in the message set the ready flag.
-                // Otherwise, reset processor state to read additional frames.
-                if (frame::get_fin(m_basic_header)) {
-                    ec = finalize_message();
-                    if (ec) {
-                        break;
-                    }
-                } else {
-                    this->reset_headers();
-                }
-            } else {
-                // shouldn't be here
-                ec = make_error_code(error::general);
-                return 0;
-            }
-        }
-
-        return p;
-    }
-
-    /// Perform any finalization actions on an incoming message
-    /**
-     * Called after the full message is received. Provides the opportunity for
-     * extensions to complete any data post processing as well as final UTF8
-     * validation checks for text messages.
-     *
-     * @return A code indicating errors, if any
-     */
-    lib::error_code finalize_message() {
-        std::string & out = m_current_msg->msg_ptr->get_raw_payload();
-
-        // if the frame is compressed, append the compression
-        // trailer and flush the compression buffer.
-        if (m_permessage_deflate.is_enabled()
-            && m_current_msg->msg_ptr->get_compressed())
-        {
-            uint8_t trailer[4] = {0x00, 0x00, 0xff, 0xff};
-
-            // Decompress current buffer into the message buffer
-            lib::error_code ec;
-            ec = m_permessage_deflate.decompress(trailer,4,out);
-            if (ec) {
-                return ec;
-            }
-        }
-
-        // ensure that text messages end on a valid UTF8 code point
-        if (frame::get_opcode(m_basic_header) == frame::opcode::TEXT) {
-            if (!m_current_msg->validator.complete()) {
-                return make_error_code(error::invalid_utf8);
-            }
-        }
-
-        m_state = READY;
-
-        return lib::error_code();
-    }
-
-    void reset_headers() {
-        m_state = HEADER_BASIC;
-        m_bytes_needed = frame::BASIC_HEADER_LENGTH;
-
-        m_basic_header.b0 = 0x00;
-        m_basic_header.b1 = 0x00;
-
-        std::fill_n(
-            m_extended_header.bytes,
-            frame::MAX_EXTENDED_HEADER_LENGTH,
-            0x00
-        );
-    }
-
-    /// Test whether or not the processor has a message ready
-    bool ready() const {
-        return (m_state == READY);
-    }
-
-    message_ptr get_message() {
-        if (!ready()) {
-            return message_ptr();
-        }
-        message_ptr ret = m_current_msg->msg_ptr;
-        m_current_msg->msg_ptr.reset();
-
-        if (frame::opcode::is_control(ret->get_opcode())) {
-            m_control_msg.msg_ptr.reset();
-        } else {
-            m_data_msg.msg_ptr.reset();
-        }
-
-        this->reset_headers();
-
-        return ret;
-    }
-
-    /// Test whether or not the processor is in a fatal error state.
-    bool get_error() const {
-        return m_state == FATAL_ERROR;
-    }
-
-    size_t get_bytes_needed() const {
-        return m_bytes_needed;
-    }
-
-    /// Prepare a user data message for writing
-    /**
-     * Performs validation, masking, compression, etc. will return an error if
-     * there was an error, otherwise msg will be ready to be written
-     *
-     * TODO: tests
-     *
-     * @param in An unprepared message to prepare
-     * @param out A message to be overwritten with the prepared message
-     * @return error code
-     */
-    virtual lib::error_code prepare_data_frame(message_ptr in, message_ptr out)
-    {
-        if (!in || !out) {
-            return make_error_code(error::invalid_arguments);
-        }
-
-        frame::opcode::value op = in->get_opcode();
-
-        // validate opcode: only regular data frames
-        if (frame::opcode::is_control(op)) {
-            return make_error_code(error::invalid_opcode);
-        }
-
-        std::string& i = in->get_raw_payload();
-        std::string& o = out->get_raw_payload();
-
-        // validate payload utf8
-        if (op == frame::opcode::TEXT && !utf8_validator::validate(i)) {
-            return make_error_code(error::invalid_payload);
-        }
-
-        frame::masking_key_type key;
-        bool masked = !base::m_server;
-        bool compressed = m_permessage_deflate.is_enabled()
-                          && in->get_compressed();
-        bool fin = in->get_fin();
-
-        if (masked) {
-            // Generate masking key.
-            key.i = m_rng();
-        } else {
-            key.i = 0;
-        }
-
-        // prepare payload
-        if (compressed) {
-            // compress and store in o after header.
-            m_permessage_deflate.compress(i,o);
-
-            if (o.size() < 4) {
-                return make_error_code(error::general);
-            }
-
-            // Strip trailing 4 0x00 0x00 0xff 0xff bytes before writing to the
-            // wire
-            o.resize(o.size()-4);
-
-            // mask in place if necessary
-            if (masked) {
-                this->masked_copy(o,o,key);
-            }
-        } else {
-            // no compression, just copy data into the output buffer
-            o.resize(i.size());
-
-            // if we are masked, have the masking function write to the output
-            // buffer directly to avoid another copy. If not masked, copy
-            // directly without masking.
-            if (masked) {
-                this->masked_copy(i,o,key);
-            } else {
-                std::copy(i.begin(),i.end(),o.begin());
-            }
-        }
-
-        // generate header
-        frame::basic_header h(op,o.size(),fin,masked,compressed);
-
-        if (masked) {
-            frame::extended_header e(o.size(),key.i);
-            out->set_header(frame::prepare_header(h,e));
-        } else {
-            frame::extended_header e(o.size());
-            out->set_header(frame::prepare_header(h,e));
-        }
-
-        out->set_prepared(true);
-        out->set_opcode(op);
-
-        return lib::error_code();
-    }
-
-    /// Get URI
-    lib::error_code prepare_ping(std::string const & in, message_ptr out) const {
-        return this->prepare_control(frame::opcode::PING,in,out);
-    }
-
-    lib::error_code prepare_pong(std::string const & in, message_ptr out) const {
-        return this->prepare_control(frame::opcode::PONG,in,out);
-    }
-
-    virtual lib::error_code prepare_close(close::status::value code,
-        std::string const & reason, message_ptr out) const
-    {
-        if (close::status::reserved(code)) {
-            return make_error_code(error::reserved_close_code);
-        }
-
-        if (close::status::invalid(code) && code != close::status::no_status) {
-            return make_error_code(error::invalid_close_code);
-        }
-
-        if (code == close::status::no_status && reason.size() > 0) {
-            return make_error_code(error::reason_requires_code);
-        }
-
-        if (reason.size() > frame:: limits::payload_size_basic-2) {
-            return make_error_code(error::control_too_big);
-        }
-
-        std::string payload;
-
-        if (code != close::status::no_status) {
-            close::code_converter val;
-            val.i = htons(code);
-
-            payload.resize(reason.size()+2);
-
-            payload[0] = val.c[0];
-            payload[1] = val.c[1];
-
-            std::copy(reason.begin(),reason.end(),payload.begin()+2);
-        }
-
-        return this->prepare_control(frame::opcode::CLOSE,payload,out);
-    }
-protected:
-    /// Convert a client handshake key into a server response key in place
-    lib::error_code process_handshake_key(std::string & key) const {
-        key.append(constants::handshake_guid);
-
-        unsigned char message_digest[20];
-        sha1::calc(key.c_str(),key.length(),message_digest);
-        key = base64_encode(message_digest,20);
-
-        return lib::error_code();
-    }
-
-    /// Reads bytes from buf into m_basic_header
-    size_t copy_basic_header_bytes(uint8_t const * buf, size_t len) {
-        if (len == 0 || m_bytes_needed == 0) {
-            return 0;
-        }
-
-        if (len > 1) {
-            // have at least two bytes
-            if (m_bytes_needed == 2) {
-                m_basic_header.b0 = buf[0];
-                m_basic_header.b1 = buf[1];
-                m_bytes_needed -= 2;
-                return 2;
-            } else {
-                m_basic_header.b1 = buf[0];
-                m_bytes_needed--;
-                return 1;
-            }
-        } else {
-            // have exactly one byte
-            if (m_bytes_needed == 2) {
-                m_basic_header.b0 = buf[0];
-                m_bytes_needed--;
-                return 1;
-            } else {
-                m_basic_header.b1 = buf[0];
-                m_bytes_needed--;
-                return 1;
-            }
-        }
-    }
-
-    /// Reads bytes from buf into m_extended_header
-    size_t copy_extended_header_bytes(uint8_t const * buf, size_t len) {
-        size_t bytes_to_read = (std::min)(m_bytes_needed,len);
-
-        std::copy(buf,buf+bytes_to_read,m_extended_header.bytes+m_cursor);
-        m_cursor += bytes_to_read;
-        m_bytes_needed -= bytes_to_read;
-
-        return bytes_to_read;
-    }
-
-    /// Reads bytes from buf into message payload
-    /**
-     * This function performs unmasking and uncompression, validates the
-     * decoded bytes, and writes them to the appropriate message buffer.
-     *
-     * This member function will use the input buffer as stratch space for its
-     * work. The raw input bytes will not be preserved. This applies only to the
-     * bytes actually needed. At most min(m_bytes_needed,len) will be processed.
-     *
-     * @param buf Input/working buffer
-     * @param len Length of buf
-     * @return Number of bytes processed or zero in case of an error
-     */
-    size_t process_payload_bytes(uint8_t * buf, size_t len, lib::error_code& ec)
-    {
-        // unmask if masked
-        if (frame::get_masked(m_basic_header)) {
-            m_current_msg->prepared_key = frame::byte_mask_circ(
-                buf, len, m_current_msg->prepared_key);
-            // TODO: SIMD masking
-        }
-
-        std::string & out = m_current_msg->msg_ptr->get_raw_payload();
-        size_t offset = out.size();
-
-        // decompress message if needed.
-        if (m_permessage_deflate.is_enabled()
-            && m_current_msg->msg_ptr->get_compressed())
-        {
-            // Decompress current buffer into the message buffer
-            ec = m_permessage_deflate.decompress(buf,len,out);
-            if (ec) {
-                return 0;
-            }
-        } else {
-            // No compression, straight copy
-            out.append(reinterpret_cast<char *>(buf),len);
-        }
-
-        // validate unmasked, decompressed values
-        if (m_current_msg->msg_ptr->get_opcode() == frame::opcode::TEXT) {
-            if (!m_current_msg->validator.decode(out.begin()+offset,out.end())) {
-                ec = make_error_code(error::invalid_utf8);
-                return 0;
-            }
-        }
-
-        m_bytes_needed -= len;
-
-        return len;
-    }
-
-    /// Validate an incoming basic header
-    /**
-     * Validates an incoming hybi13 basic header.
-     *
-     * @param h The basic header to validate
-     * @param is_server Whether or not the endpoint that received this frame
-     * is a server.
-     * @param new_msg Whether or not this is the first frame of the message
-     * @return 0 on success or a non-zero error code on failure
-     */
-    lib::error_code validate_incoming_basic_header(frame::basic_header const & h,
-        bool is_server, bool new_msg) const
-    {
-        frame::opcode::value op = frame::get_opcode(h);
-
-        // Check control frame size limit
-        if (frame::opcode::is_control(op) &&
-            frame::get_basic_size(h) > frame::limits::payload_size_basic)
-        {
-            return make_error_code(error::control_too_big);
-        }
-
-        // Check that RSV bits are clear
-        // The only RSV bits allowed are rsv1 if the permessage_compress
-        // extension is enabled for this connection and the message is not
-        // a control message.
-        //
-        // TODO: unit tests for this
-        if (frame::get_rsv1(h) && (!m_permessage_deflate.is_enabled()
-                || frame::opcode::is_control(op)))
-        {
-            return make_error_code(error::invalid_rsv_bit);
-        }
-
-        if (frame::get_rsv2(h) || frame::get_rsv3(h)) {
-            return make_error_code(error::invalid_rsv_bit);
-        }
-
-        // Check for reserved opcodes
-        if (frame::opcode::reserved(op)) {
-            return make_error_code(error::invalid_opcode);
-        }
-
-        // Check for fragmented control message
-        if (frame::opcode::is_control(op) && !frame::get_fin(h)) {
-            return make_error_code(error::fragmented_control);
-        }
-
-        // Check for continuation without an active message
-        if (new_msg && op == frame::opcode::CONTINUATION) {
-            return make_error_code(error::invalid_continuation);
-        }
-
-        // Check for new data frame when expecting continuation
-        if (!new_msg && !frame::opcode::is_control(op) &&
-            op != frame::opcode::CONTINUATION)
-        {
-            return make_error_code(error::invalid_continuation);
-        }
-
-        // Servers should reject any unmasked frames from clients.
-        // Clients should reject any masked frames from servers.
-        if (is_server && !frame::get_masked(h)) {
-            return make_error_code(error::masking_required);
-        } else if (!is_server && frame::get_masked(h)) {
-            return make_error_code(error::masking_forbidden);
-        }
-
-        return lib::error_code();
-    }
-
-    /// Validate an incoming extended header
-    /**
-     * Validates an incoming hybi13 full header.
-     *
-     * @todo unit test for the >32 bit frames on 32 bit systems case
-     *
-     * @param h The basic header to validate
-     * @param e The extended header to validate
-     * @return An error_code, non-zero values indicate why the validation
-     * failed
-     */
-    lib::error_code validate_incoming_extended_header(frame::basic_header h,
-        frame::extended_header e) const
-    {
-        uint8_t basic_size = frame::get_basic_size(h);
-        uint64_t payload_size = frame::get_payload_size(h,e);
-
-        // Check for non-minimally encoded payloads
-        if (basic_size == frame::payload_size_code_16bit &&
-            payload_size <= frame::limits::payload_size_basic)
-        {
-            return make_error_code(error::non_minimal_encoding);
-        }
-
-        if (basic_size == frame::payload_size_code_64bit &&
-            payload_size <= frame::limits::payload_size_extended)
-        {
-            return make_error_code(error::non_minimal_encoding);
-        }
-
-        // Check for >32bit frames on 32 bit systems
-        if (sizeof(size_t) == 4 && (payload_size >> 32)) {
-            return make_error_code(error::requires_64bit);
-        }
-
-        return lib::error_code();
-    }
-
-    /// Copy and mask/unmask in one operation
-    /**
-     * Reads input from one string and writes unmasked output to another.
-     *
-     * @param [in] i The input string.
-     * @param [out] o The output string.
-     * @param [in] key The masking key to use for masking/unmasking
-     */
-    void masked_copy (std::string const & i, std::string & o,
-        frame::masking_key_type key) const
-    {
-        frame::byte_mask(i.begin(),i.end(),o.begin(),key);
-        // TODO: SIMD masking
-    }
-
-    /// Generic prepare control frame with opcode and payload.
-    /**
-     * Internal control frame building method. Handles validation, masking, etc
-     *
-     * @param op The control opcode to use
-     * @param payload The payload to use
-     * @param out The message buffer to store the prepared frame in
-     * @return Status code, zero on success, non-zero on error
-     */
-    lib::error_code prepare_control(frame::opcode::value op,
-        std::string const & payload, message_ptr out) const
-    {
-        if (!out) {
-            return make_error_code(error::invalid_arguments);
-        }
-
-        if (!frame::opcode::is_control(op)) {
-            return make_error_code(error::invalid_opcode);
-        }
-
-        if (payload.size() > frame::limits::payload_size_basic) {
-            return make_error_code(error::control_too_big);
-        }
-
-        frame::masking_key_type key;
-        bool masked = !base::m_server;
-
-        frame::basic_header h(op,payload.size(),true,masked);
-
-        std::string & o = out->get_raw_payload();
-        o.resize(payload.size());
-
-        if (masked) {
-            // Generate masking key.
-            key.i = m_rng();
-
-            frame::extended_header e(payload.size(),key.i);
-            out->set_header(frame::prepare_header(h,e));
-            this->masked_copy(payload,o,key);
-        } else {
-            frame::extended_header e(payload.size());
-            out->set_header(frame::prepare_header(h,e));
-            std::copy(payload.begin(),payload.end(),o.begin());
-        }
-
-        out->set_opcode(op);
-        out->set_prepared(true);
-
-        return lib::error_code();
-    }
-
-    enum state {
-        HEADER_BASIC = 0,
-        HEADER_EXTENDED = 1,
-        EXTENSION = 2,
-        APPLICATION = 3,
-        READY = 4,
-        FATAL_ERROR = 5
-    };
-
-    /// This data structure holds data related to processing a message, such as
-    /// the buffer it is being written to, its masking key, its UTF8 validation
-    /// state, and sometimes its compression state.
-    struct msg_metadata {
-        msg_metadata() {}
-        msg_metadata(message_ptr m, size_t p) : msg_ptr(m),prepared_key(p) {}
-        msg_metadata(message_ptr m, frame::masking_key_type p)
-          : msg_ptr(m)
-          , prepared_key(prepare_masking_key(p)) {}
-
-        message_ptr msg_ptr;        // pointer to the message data buffer
-        size_t      prepared_key;   // prepared masking key
-        utf8_validator::validator validator; // utf8 validation state
-    };
-
-    // Basic header of the frame being read
-    frame::basic_header m_basic_header;
-
-    // Pointer to a manager that can create message buffers for us.
-    msg_manager_ptr m_msg_manager;
-
-    // Number of bytes needed to complete the current operation
-    size_t m_bytes_needed;
-
-    // Number of extended header bytes read
-    size_t m_cursor;
-
-    // Metadata for the current data msg
-    msg_metadata m_data_msg;
-    // Metadata for the current control msg
-    msg_metadata m_control_msg;
-
-    // Pointer to the metadata associated with the frame being read
-    msg_metadata * m_current_msg;
-
-    // Extended header of current frame
-    frame::extended_header m_extended_header;
-
-    rng_type & m_rng;
-
-    // Overall state of the processor
-    state m_state;
-
-    // Extensions
-    permessage_deflate_type m_permessage_deflate;
-};
-
-} // namespace processor
-} // namespace websocketpp
-
-#endif //WEBSOCKETPP_PROCESSOR_HYBI13_HPP