passenger 6.0.26 → 6.1.0

data/src/cxx_supportlib/vendor-modified/websocketpp/websocketpp/extensions/permessage_deflate/enabled.hpp

@@ -1,817 +0,0 @@
-/*
- * Copyright (c) 2015, Peter Thorson. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of the WebSocket++ Project nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL PETER THORSON BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- */
-
-#ifndef WEBSOCKETPP_PROCESSOR_EXTENSION_PERMESSAGEDEFLATE_HPP
-#define WEBSOCKETPP_PROCESSOR_EXTENSION_PERMESSAGEDEFLATE_HPP
-
-
-#include <websocketpp/common/cpp11.hpp>
-#include <websocketpp/common/memory.hpp>
-#include <websocketpp/common/platforms.hpp>
-#include <websocketpp/common/stdint.hpp>
-#include <websocketpp/common/system_error.hpp>
-#include <websocketpp/error.hpp>
-
-#include <websocketpp/extensions/extension.hpp>
-
-#include "zlib.h"
-
-#include <algorithm>
-#include <string>
-#include <vector>
-
-namespace websocketpp {
-namespace extensions {
-
-/// Implementation of RFC 7692, the permessage-deflate WebSocket extension
-/**
- * ### permessage-deflate interface
- *
- * **init**\n
- * `lib::error_code init(bool is_server)`\n
- * Performs initialization
- *
- * **is_implimented**\n
- * `bool is_implimented()`\n
- * Returns whether or not the object impliments the extension or not
- *
- * **is_enabled**\n
- * `bool is_enabled()`\n
- * Returns whether or not the extension was negotiated for the current
- * connection
- *
- * **generate_offer**\n
- * `std::string generate_offer() const`\n
- * Create an extension offer string based on local policy
- *
- * **validate_response**\n
- * `lib::error_code validate_response(http::attribute_list const & response)`\n
- * Negotiate the parameters of extension use
- *
- * **negotiate**\n
- * `err_str_pair negotiate(http::attribute_list const & attributes)`\n
- * Negotiate the parameters of extension use
- *
- * **compress**\n
- * `lib::error_code compress(std::string const & in, std::string & out)`\n
- * Compress the bytes in `in` and append them to `out`
- *
- * **decompress**\n
- * `lib::error_code decompress(uint8_t const * buf, size_t len, std::string &
- * out)`\n
- * Decompress `len` bytes from `buf` and append them to string `out`
- */
-namespace permessage_deflate {
-
-/// Permessage deflate error values
-namespace error {
-enum value {
-    /// Catch all
-    general = 1,
-
-    /// Invalid extension attributes
-    invalid_attributes,
-
-    /// Invalid extension attribute value
-    invalid_attribute_value,
-
-    /// Invalid megotiation mode
-    invalid_mode,
-
-    /// Unsupported extension attributes
-    unsupported_attributes,
-
-    /// Invalid value for max_window_bits
-    invalid_max_window_bits,
-
-    /// ZLib Error
-    zlib_error,
-
-    /// Uninitialized
-    uninitialized,
-};
-
-/// Permessage-deflate error category
-class category : public lib::error_category {
-public:
-    category() {}
-
-    char const * name() const _WEBSOCKETPP_NOEXCEPT_TOKEN_ {
-        return "websocketpp.extension.permessage-deflate";
-    }
-
-    std::string message(int value) const {
-        switch(value) {
-            case general:
-                return "Generic permessage-compress error";
-            case invalid_attributes:
-                return "Invalid extension attributes";
-            case invalid_attribute_value:
-                return "Invalid extension attribute value";
-            case invalid_mode:
-                return "Invalid permessage-deflate negotiation mode";
-            case unsupported_attributes:
-                return "Unsupported extension attributes";
-            case invalid_max_window_bits:
-                return "Invalid value for max_window_bits";
-            case zlib_error:
-                return "A zlib function returned an error";
-            case uninitialized:
-                return "Deflate extension must be initialized before use";
-            default:
-                return "Unknown permessage-compress error";
-        }
-    }
-};
-
-/// Get a reference to a static copy of the permessage-deflate error category
-inline lib::error_category const & get_category() {
-    static category instance;
-    return instance;
-}
-
-/// Create an error code in the permessage-deflate category
-inline lib::error_code make_error_code(error::value e) {
-    return lib::error_code(static_cast<int>(e), get_category());
-}
-
-} // namespace error
-} // namespace permessage_deflate
-} // namespace extensions
-} // namespace websocketpp
-
-_WEBSOCKETPP_ERROR_CODE_ENUM_NS_START_
-template<> struct is_error_code_enum
-    <websocketpp::extensions::permessage_deflate::error::value>
-{
-    static bool const value = true;
-};
-_WEBSOCKETPP_ERROR_CODE_ENUM_NS_END_
-namespace websocketpp {
-namespace extensions {
-namespace permessage_deflate {
-
-/// Default value for server_max_window_bits as defined by RFC 7692
-static uint8_t const default_server_max_window_bits = 15;
-/// Minimum value for server_max_window_bits as defined by RFC 7692
-/**
- * NOTE: A value of 8 is not actually supported by zlib, the deflate
- * library that WebSocket++ uses. To preserve backwards compatibility
- * with RFC 7692 and previous versions of the library a value of 8
- * is accepted by the library but will always be negotiated as 9.
- */
-static uint8_t const min_server_max_window_bits = 8;
-/// Maximum value for server_max_window_bits as defined by RFC 7692
-static uint8_t const max_server_max_window_bits = 15;
-
-/// Default value for client_max_window_bits as defined by RFC 7692
-static uint8_t const default_client_max_window_bits = 15;
-/// Minimum value for client_max_window_bits as defined by RFC 7692
-/**
- * NOTE: A value of 8 is not actually supported by zlib, the deflate
- * library that WebSocket++ uses. To preserve backwards compatibility
- * with RFC 7692 and previous versions of the library a value of 8
- * is accepted by the library but will always be negotiated as 9.
- */
-static uint8_t const min_client_max_window_bits = 8;
-/// Maximum value for client_max_window_bits as defined by RFC 7692
-static uint8_t const max_client_max_window_bits = 15;
-
-namespace mode {
-enum value {
-    /// Accept any value the remote endpoint offers
-    accept = 1,
-    /// Decline any value the remote endpoint offers. Insist on defaults.
-    decline,
-    /// Use the largest value common to both offers
-    largest,
-    /// Use the smallest value common to both offers
-    smallest
-};
-} // namespace mode
-
-template <typename config>
-class enabled {
-public:
-    enabled()
-      : m_enabled(false)
-      , m_server_no_context_takeover(false)
-      , m_client_no_context_takeover(false)
-      , m_server_max_window_bits(15)
-      , m_client_max_window_bits(15)
-      , m_server_max_window_bits_mode(mode::accept)
-      , m_client_max_window_bits_mode(mode::accept)
-      , m_initialized(false)
-      , m_compress_buffer_size(8192)
-    {
-        m_dstate.zalloc = Z_NULL;
-        m_dstate.zfree = Z_NULL;
-        m_dstate.opaque = Z_NULL;
-
-        m_istate.zalloc = Z_NULL;
-        m_istate.zfree = Z_NULL;
-        m_istate.opaque = Z_NULL;
-        m_istate.avail_in = 0;
-        m_istate.next_in = Z_NULL;
-    }
-
-    ~enabled() {
-        if (!m_initialized) {
-            return;
-        }
-
-        int ret = deflateEnd(&m_dstate);
-
-        if (ret != Z_OK) {
-            //std::cout << "error cleaning up zlib compression state"
-            //          << std::endl;
-        }
-
-        ret = inflateEnd(&m_istate);
-
-        if (ret != Z_OK) {
-            //std::cout << "error cleaning up zlib decompression state"
-            //          << std::endl;
-        }
-    }
-
-    /// Initialize zlib state
-    /**
-     * Note: this should be called *after* the negotiation methods. It will use
-     * information from the negotiation to determine how to initialize the zlib
-     * data structures.
-     *
-     * @todo memory level, strategy, etc are hardcoded
-     *
-     * @param is_server True to initialize as a server, false for a client.
-     * @return A code representing the error that occurred, if any
-     */
-    lib::error_code init(bool is_server) {
-        uint8_t deflate_bits;
-        uint8_t inflate_bits;
-
-        if (is_server) {
-            deflate_bits = m_server_max_window_bits;
-            inflate_bits = m_client_max_window_bits;
-        } else {
-            deflate_bits = m_client_max_window_bits;
-            inflate_bits = m_server_max_window_bits;
-        }
-
-        int ret = deflateInit2(
-            &m_dstate,
-            Z_DEFAULT_COMPRESSION,
-            Z_DEFLATED,
-            -1*deflate_bits,
-            4, // memory level 1-9
-            Z_DEFAULT_STRATEGY
-        );
-
-        if (ret != Z_OK) {
-            return make_error_code(error::zlib_error);
-        }
-
-        ret = inflateInit2(
-            &m_istate,
-            -1*inflate_bits
-        );
-
-        if (ret != Z_OK) {
-            return make_error_code(error::zlib_error);
-        }
-
-        m_compress_buffer.reset(new unsigned char[m_compress_buffer_size]);
-        m_decompress_buffer.reset(new unsigned char[m_compress_buffer_size]);
-        if ((m_server_no_context_takeover && is_server) ||
-            (m_client_no_context_takeover && !is_server))
-        {
-            m_flush = Z_FULL_FLUSH;
-        } else {
-            m_flush = Z_SYNC_FLUSH;
-        }
-        m_initialized = true;
-        return lib::error_code();
-    }
-
-    /// Test if this object implements the permessage-deflate specification
-    /**
-     * Because this object does implieent it, it will always return true.
-     *
-     * @return Whether or not this object implements permessage-deflate
-     */
-    bool is_implemented() const {
-        return true;
-    }
-
-    /// Test if the extension was negotiated for this connection
-    /**
-     * Retrieves whether or not this extension is in use based on the initial
-     * handshake extension negotiations.
-     *
-     * @return Whether or not the extension is in use
-     */
-    bool is_enabled() const {
-        return m_enabled;
-    }
-
-    /// Reset server's outgoing LZ77 sliding window for each new message
-    /**
-     * Enabling this setting will cause the server's compressor to reset the
-     * compression state (the LZ77 sliding window) for every message. This
-     * means that the compressor will not look back to patterns in previous
-     * messages to improve compression. This will reduce the compression
-     * efficiency for large messages somewhat and small messages drastically.
-     *
-     * This option may reduce server compressor memory usage and client
-     * decompressor memory usage.
-     * @todo Document to what extent memory usage will be reduced
-     *
-     * For clients, this option is dependent on server support. Enabling it
-     * via this method does not guarantee that it will be successfully
-     * negotiated, only that it will be requested.
-     *
-     * For servers, no client support is required. Enabling this option on a
-     * server will result in its use. The server will signal to clients that
-     * the option will be in use so they can optimize resource usage if they
-     * are able.
-     */
-    void enable_server_no_context_takeover() {
-        m_server_no_context_takeover = true;
-    }
-
-    /// Reset client's outgoing LZ77 sliding window for each new message
-    /**
-     * Enabling this setting will cause the client's compressor to reset the
-     * compression state (the LZ77 sliding window) for every message. This
-     * means that the compressor will not look back to patterns in previous
-     * messages to improve compression. This will reduce the compression
-     * efficiency for large messages somewhat and small messages drastically.
-     *
-     * This option may reduce client compressor memory usage and server
-     * decompressor memory usage.
-     * @todo Document to what extent memory usage will be reduced
-     *
-     * This option is supported by all compliant clients and servers. Enabling
-     * it via either endpoint should be sufficient to ensure it is used.
-     */
-    void enable_client_no_context_takeover() {
-        m_client_no_context_takeover = true;
-    }
-
-    /// Limit server LZ77 sliding window size
-    /**
-     * The bits setting is the base 2 logarithm of the maximum window size that
-     * the server must use to compress outgoing messages. The permitted range
-     * is 9 to 15 inclusive. 9 represents a 512 byte window and 15 a 32KiB
-     * window. The default setting is 15.
-     *
-     * Mode Options:
-     * - accept: Accept whatever the remote endpoint offers.
-     * - decline: Decline any offers to deviate from the defaults
-     * - largest: Accept largest window size acceptable to both endpoints
-     * - smallest: Accept smallest window size acceptiable to both endpoints
-     *
-     * This setting is dependent on server support. A client requesting this
-     * setting may be rejected by the server or have the exact value used
-     * adjusted by the server. A server may unilaterally set this value without
-     * client support.
-     *
-     * NOTE: The permessage-deflate spec specifies that a value of 8 is allowed.
-     * Prior to version 0.8.0 a value of 8 was also allowed by this library.
-     * zlib, the deflate compression library that WebSocket++ uses has always
-     * silently adjusted a value of 8 to 9. In recent versions of zlib (1.2.9 
-     * and greater) a value of 8 is now explicitly rejected. WebSocket++ 0.8.0
-     * continues to perform the 8->9 conversion for backwards compatibility
-     * purposes but this should be considered deprecated functionality.
-     *
-     * @param bits The size to request for the outgoing window size
-     * @param mode The mode to use for negotiating this parameter
-     * @return A status code
-     */
-    lib::error_code set_server_max_window_bits(uint8_t bits, mode::value mode) {
-        if (bits < min_server_max_window_bits || bits > max_server_max_window_bits) {
-            return error::make_error_code(error::invalid_max_window_bits);
-        }
-
-        // See note in doc comment above about what is happening here
-        if (bits == 8) {
-            bits = 9;
-        }
-
-        m_server_max_window_bits = bits;
-        m_server_max_window_bits_mode = mode;
-
-        return lib::error_code();
-    }
-
-    /// Limit client LZ77 sliding window size
-    /**
-     * The bits setting is the base 2 logarithm of the window size that the
-     * client must use to compress outgoing messages. The permitted range is 9
-     * to 15 inclusive. 9 represents a 512 byte window and 15 a 32KiB window.
-     * The default setting is 15.
-     *
-     * Mode Options:
-     * - accept: Accept whatever the remote endpoint offers.
-     * - decline: Decline any offers to deviate from the defaults
-     * - largest: Accept largest window size acceptable to both endpoints
-     * - smallest: Accept smallest window size acceptiable to both endpoints
-     *
-     * This setting is dependent on client support. A client may limit its own
-     * outgoing window size unilaterally. A server may only limit the client's
-     * window size if the remote client supports that feature.
-     *
-     * NOTE: The permessage-deflate spec specifies that a value of 8 is allowed.
-     * Prior to version 0.8.0 a value of 8 was also allowed by this library.
-     * zlib, the deflate compression library that WebSocket++ uses has always
-     * silently adjusted a value of 8 to 9. In recent versions of zlib (1.2.9 
-     * and greater) a value of 8 is now explicitly rejected. WebSocket++ 0.8.0
-     * continues to perform the 8->9 conversion for backwards compatibility
-     * purposes but this should be considered deprecated functionality.
-     *
-     * @param bits The size to request for the outgoing window size
-     * @param mode The mode to use for negotiating this parameter
-     * @return A status code
-     */
-    lib::error_code set_client_max_window_bits(uint8_t bits, mode::value mode) {
-        if (bits < min_client_max_window_bits || bits > max_client_max_window_bits) {
-            return error::make_error_code(error::invalid_max_window_bits);
-        }
-
-        // See note in doc comment above about what is happening here
-        if (bits == 8) {
-            bits = 9;
-        }
-
-        m_client_max_window_bits = bits;
-        m_client_max_window_bits_mode = mode;
-
-        return lib::error_code();
-    }
-
-    /// Generate extension offer
-    /**
-     * Creates an offer string to include in the Sec-WebSocket-Extensions
-     * header of outgoing client requests.
-     *
-     * @return A WebSocket extension offer string for this extension
-     */
-    std::string generate_offer() const {
-        // TODO: this should be dynamically generated based on user settings
-        return "permessage-deflate; client_no_context_takeover; client_max_window_bits";
-    }
-
-    /// Validate extension response
-    /**
-     * Confirm that the server has negotiated settings compatible with our
-     * original offer and apply those settings to the extension state.
-     *
-     * @param response The server response attribute list to validate
-     * @return Validation error or 0 on success
-     */
-    lib::error_code validate_offer(http::attribute_list const &) {
-        return lib::error_code();
-    }
-
-    /// Negotiate extension
-    /**
-     * Confirm that the client's extension negotiation offer has settings
-     * compatible with local policy. If so, generate a reply and apply those
-     * settings to the extension state.
-     *
-     * @param offer Attribute from client's offer
-     * @return Status code and value to return to remote endpoint
-     */
-    err_str_pair negotiate(http::attribute_list const & offer) {
-        err_str_pair ret;
-
-        http::attribute_list::const_iterator it;
-        for (it = offer.begin(); it != offer.end(); ++it) {
-            if (it->first == "server_no_context_takeover") {
-                negotiate_server_no_context_takeover(it->second,ret.first);
-            } else if (it->first == "client_no_context_takeover") {
-                negotiate_client_no_context_takeover(it->second,ret.first);
-            } else if (it->first == "server_max_window_bits") {
-                negotiate_server_max_window_bits(it->second,ret.first);
-            } else if (it->first == "client_max_window_bits") {
-                negotiate_client_max_window_bits(it->second,ret.first);
-            } else {
-                ret.first = make_error_code(error::invalid_attributes);
-            }
-
-            if (ret.first) {
-                break;
-            }
-        }
-
-        if (ret.first == lib::error_code()) {
-            m_enabled = true;
-            ret.second = generate_response();
-        }
-
-        return ret;
-    }
-
-    /// Compress bytes
-    /**
-     * @todo: avail_in/out is 32 bit, need to fix for cases of >32 bit frames
-     * on 64 bit machines.
-     *
-     * @param [in] in String to compress
-     * @param [out] out String to append compressed bytes to
-     * @return Error or status code
-     */
-    lib::error_code compress(std::string const & in, std::string & out) {
-        if (!m_initialized) {
-            return make_error_code(error::uninitialized);
-        }
-
-        size_t output;
-
-        if (in.empty()) {
-            uint8_t buf[6] = {0x02, 0x00, 0x00, 0x00, 0xff, 0xff};
-            out.append((char *)(buf),6);
-            return lib::error_code();
-        }
-
-        m_dstate.avail_in = in.size();
-        m_dstate.next_in = (unsigned char *)(const_cast<char *>(in.data()));
-
-        do {
-            // Output to local buffer
-            m_dstate.avail_out = m_compress_buffer_size;
-            m_dstate.next_out = m_compress_buffer.get();
-
-            deflate(&m_dstate, m_flush);
-
-            output = m_compress_buffer_size - m_dstate.avail_out;
-
-            out.append((char *)(m_compress_buffer.get()),output);
-        } while (m_dstate.avail_out == 0);
-
-        return lib::error_code();
-    }
-
-    /// Decompress bytes
-    /**
-     * @param buf Byte buffer to decompress
-     * @param len Length of buf
-     * @param out String to append decompressed bytes to
-     * @return Error or status code
-     */
-    lib::error_code decompress(uint8_t const * buf, size_t len, std::string &
-        out)
-    {
-        if (!m_initialized) {
-            return make_error_code(error::uninitialized);
-        }
-
-        int ret;
-
-        m_istate.avail_in = len;
-        m_istate.next_in = const_cast<unsigned char *>(buf);
-
-        do {
-            m_istate.avail_out = m_compress_buffer_size;
-            m_istate.next_out = m_decompress_buffer.get();
-
-            ret = inflate(&m_istate, Z_SYNC_FLUSH);
-
-            if (ret == Z_NEED_DICT || ret == Z_DATA_ERROR || ret == Z_MEM_ERROR) {
-                return make_error_code(error::zlib_error);
-            }
-
-            out.append(
-                reinterpret_cast<char *>(m_decompress_buffer.get()),
-                m_compress_buffer_size - m_istate.avail_out
-            );
-        } while (m_istate.avail_out == 0);
-
-        return lib::error_code();
-    }
-private:
-    /// Generate negotiation response
-    /**
-     * @return Generate extension negotiation reponse string to send to client
-     */
-    std::string generate_response() {
-        std::string ret = "permessage-deflate";
-
-        if (m_server_no_context_takeover) {
-            ret += "; server_no_context_takeover";
-        }
-
-        if (m_client_no_context_takeover) {
-            ret += "; client_no_context_takeover";
-        }
-
-        if (m_server_max_window_bits < default_server_max_window_bits) {
-            std::stringstream s;
-            s << int(m_server_max_window_bits);
-            ret += "; server_max_window_bits="+s.str();
-        }
-
-        if (m_client_max_window_bits < default_client_max_window_bits) {
-            std::stringstream s;
-            s << int(m_client_max_window_bits);
-            ret += "; client_max_window_bits="+s.str();
-        }
-
-        return ret;
-    }
-
-    /// Negotiate server_no_context_takeover attribute
-    /**
-     * @param [in] value The value of the attribute from the offer
-     * @param [out] ec A reference to the error code to return errors via
-     */
-    void negotiate_server_no_context_takeover(std::string const & value,
-        lib::error_code & ec)
-    {
-        if (!value.empty()) {
-            ec = make_error_code(error::invalid_attribute_value);
-            return;
-        }
-
-        m_server_no_context_takeover = true;
-    }
-
-    /// Negotiate client_no_context_takeover attribute
-    /**
-     * @param [in] value The value of the attribute from the offer
-     * @param [out] ec A reference to the error code to return errors via
-     */
-    void negotiate_client_no_context_takeover(std::string const & value,
-        lib::error_code & ec)
-    {
-        if (!value.empty()) {
-            ec = make_error_code(error::invalid_attribute_value);
-            return;
-        }
-
-        m_client_no_context_takeover = true;
-    }
-
-    /// Negotiate server_max_window_bits attribute
-    /**
-     * When this method starts, m_server_max_window_bits will contain the server's
-     * preferred value and m_server_max_window_bits_mode will contain the mode the
-     * server wants to use to for negotiation. `value` contains the value the
-     * client requested that we use.
-     *
-     * options:
-     * - decline (ignore value, offer our default instead)
-     * - accept (use the value requested by the client)
-     * - largest (use largest value acceptable to both)
-     * - smallest (use smallest possible value)
-     *
-     * NOTE: As a value of 8 is no longer explicitly supported by zlib but might
-     * be requested for negotiation by an older client/server, if the result of
-     * the negotiation would be to send a value of 8, a value of 9 is offered
-     * instead. This ensures that WebSocket++ will only ever negotiate connections
-     * with compression settings explicitly supported by zlib.
-     *
-     * @param [in] value The value of the attribute from the offer
-     * @param [out] ec A reference to the error code to return errors via
-     */
-    void negotiate_server_max_window_bits(std::string const & value,
-        lib::error_code & ec)
-    {
-        uint8_t bits = uint8_t(atoi(value.c_str()));
-
-        if (bits < min_server_max_window_bits || bits > max_server_max_window_bits) {
-            ec = make_error_code(error::invalid_attribute_value);
-            m_server_max_window_bits = default_server_max_window_bits;
-            return;
-        }
-
-        switch (m_server_max_window_bits_mode) {
-            case mode::decline:
-                m_server_max_window_bits = default_server_max_window_bits;
-                break;
-            case mode::accept:
-                m_server_max_window_bits = bits;
-                break;
-            case mode::largest:
-                m_server_max_window_bits = std::min(bits,m_server_max_window_bits);
-                break;
-            case mode::smallest:
-                m_server_max_window_bits = min_server_max_window_bits;
-                break;
-            default:
-                ec = make_error_code(error::invalid_mode);
-                m_server_max_window_bits = default_server_max_window_bits;
-        }
-
-        // See note in doc comment
-        if (m_server_max_window_bits == 8) {
-            m_server_max_window_bits = 9;
-        }
-    }
-
-    /// Negotiate client_max_window_bits attribute
-    /**
-     * When this method starts, m_client_max_window_bits and m_c2s_max_window_mode
-     * will contain the server's preferred values for window size and
-     * negotiation mode.
-     *
-     * options:
-     * - decline (ignore value, offer our default instead)
-     * - accept (use the value requested by the client)
-     * - largest (use largest value acceptable to both)
-     * - smallest (use smallest possible value)
-     *
-     * NOTE: As a value of 8 is no longer explicitly supported by zlib but might
-     * be requested for negotiation by an older client/server, if the result of
-     * the negotiation would be to send a value of 8, a value of 9 is offered
-     * instead. This ensures that WebSocket++ will only ever negotiate connections
-     * with compression settings explicitly supported by zlib.
-     *
-     * @param [in] value The value of the attribute from the offer
-     * @param [out] ec A reference to the error code to return errors via
-     */
-    void negotiate_client_max_window_bits(std::string const & value,
-            lib::error_code & ec)
-    {
-        uint8_t bits = uint8_t(atoi(value.c_str()));
-
-        if (value.empty()) {
-            bits = default_client_max_window_bits;
-        } else if (bits < min_client_max_window_bits ||
-                   bits > max_client_max_window_bits)
-        {
-            ec = make_error_code(error::invalid_attribute_value);
-            m_client_max_window_bits = default_client_max_window_bits;
-            return;
-        }
-
-        switch (m_client_max_window_bits_mode) {
-            case mode::decline:
-                m_client_max_window_bits = default_client_max_window_bits;
-                break;
-            case mode::accept:
-                m_client_max_window_bits = bits;
-                break;
-            case mode::largest:
-                m_client_max_window_bits = std::min(bits,m_client_max_window_bits);
-                break;
-            case mode::smallest:
-                m_client_max_window_bits = min_client_max_window_bits;
-                break;
-            default:
-                ec = make_error_code(error::invalid_mode);
-                m_client_max_window_bits = default_client_max_window_bits;
-        }
-
-        // See note in doc comment
-        if (m_client_max_window_bits == 8) {
-            m_client_max_window_bits = 9;
-        }
-    }
-
-    bool m_enabled;
-    bool m_server_no_context_takeover;
-    bool m_client_no_context_takeover;
-    uint8_t m_server_max_window_bits;
-    uint8_t m_client_max_window_bits;
-    mode::value m_server_max_window_bits_mode;
-    mode::value m_client_max_window_bits_mode;
-
-    bool m_initialized;
-    int m_flush;
-    size_t m_compress_buffer_size;
-    lib::unique_ptr_uchar_array m_compress_buffer;
-    lib::unique_ptr_uchar_array m_decompress_buffer;
-    z_stream m_dstate;
-    z_stream m_istate;
-};
-
-} // namespace permessage_deflate
-} // namespace extensions
-} // namespace websocketpp
-
-#endif // WEBSOCKETPP_PROCESSOR_EXTENSION_PERMESSAGEDEFLATE_HPP