passenger 2.2.15 → 3.0.0.pre1

data/ext/google/sparsehash/sparseconfig.h

@@ -0,0 +1,55 @@
+#ifndef _GOOGLE_SPARSE_CONFIG_H_
+#define _GOOGLE_SPARSE_CONFIG_H_
+
+/* Namespace for Google classes */
+#define GOOGLE_NAMESPACE ::google
+
+/* HASH_FUN_H and HASH_NAMESPACE could be defined by platform_info.rb. */
+
+/* the location of the header defining hash functions */
+#ifndef HASH_FUN_H
+	#define HASH_FUN_H <ext/hash_fun.h>
+#endif
+
+/* the namespace of the hash<> function */
+#ifndef HASH_NAMESPACE
+	#define HASH_NAMESPACE __gnu_cxx
+#endif
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#define HAVE_INTTYPES_H 1
+
+/* Define to 1 if the system has the type `long long'. */
+#define HAVE_LONG_LONG 1
+
+/* Define to 1 if you have the `memcpy' function. */
+#define HAVE_MEMCPY 1
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#define HAVE_STDINT_H 1
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#define HAVE_SYS_TYPES_H 1
+
+/* Define to 1 if the system has the type `uint16_t'. */
+#define HAVE_UINT16_T 1
+
+/* Define to 1 if the system has the type `u_int16_t'. */
+#define HAVE_U_INT16_T 1
+
+/* Define to 1 if the system has the type `__uint16'. */
+/* #undef HAVE___UINT16 */
+
+/* The system-provided hash function including the namespace. */
+#define SPARSEHASH_HASH HASH_NAMESPACE::hash
+
+/* the namespace where STL code like vector<> is defined */
+#define STL_NAMESPACE std
+
+/* Stops putting the code inside the Google namespace */
+#define _END_GOOGLE_NAMESPACE_ }
+
+/* Puts following code inside the Google namespace */
+#define _START_GOOGLE_NAMESPACE_ namespace google {
+
+#endif /* _GOOGLE_SPARSE_CONFIG_H_ */

data/ext/google/sparsehash/sparsehashtable.h

@@ -0,0 +1,1015 @@
+// Copyright (c) 2005, Google Inc.
+// All rights reserved.
+//
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are
+// met:
+//
+//     * Redistributions of source code must retain the above copyright
+// notice, this list of conditions and the following disclaimer.
+//     * Redistributions in binary form must reproduce the above
+// copyright notice, this list of conditions and the following disclaimer
+// in the documentation and/or other materials provided with the
+// distribution.
+//     * Neither the name of Google Inc. nor the names of its
+// contributors may be used to endorse or promote products derived from
+// this software without specific prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+// ---
+// Author: Craig Silverstein
+//
+// A sparse hashtable is a particular implementation of
+// a hashtable: one that is meant to minimize memory use.
+// It does this by using a *sparse table* (cf sparsetable.h),
+// which uses between 1 and 2 bits to store empty buckets
+// (we may need another bit for hashtables that support deletion).
+//
+// When empty buckets are so cheap, an appealing hashtable
+// implementation is internal probing, in which the hashtable
+// is a single table, and collisions are resolved by trying
+// to insert again in another bucket.  The most cache-efficient
+// internal probing schemes are linear probing (which suffers,
+// alas, from clumping) and quadratic probing, which is what
+// we implement by default.
+//
+// Deleted buckets are a bit of a pain.  We have to somehow mark
+// deleted buckets (the probing must distinguish them from empty
+// buckets).  The most principled way is to have another bitmap,
+// but that's annoying and takes up space.  Instead we let the
+// user specify an "impossible" key.  We set deleted buckets
+// to have the impossible key.
+//
+// Note it is possible to change the value of the delete key
+// on the fly; you can even remove it, though after that point
+// the hashtable is insert_only until you set it again.
+//
+// You probably shouldn't use this code directly.  Use
+// <google/sparse_hash_table> or <google/sparse_hash_set> instead.
+//
+// You can modify the following, below:
+// HT_OCCUPANCY_FLT            -- how full before we double size
+// HT_EMPTY_FLT                -- how empty before we halve size
+// HT_MIN_BUCKETS              -- smallest bucket size
+// HT_DEFAULT_STARTING_BUCKETS -- default bucket size at construct-time
+//
+// You can also change enlarge_resize_percent (which defaults to
+// HT_OCCUPANCY_FLT), and shrink_resize_percent (which defaults to
+// HT_EMPTY_FLT) with set_resizing_parameters().
+//
+// How to decide what values to use?
+// shrink_resize_percent's default of .4 * OCCUPANCY_FLT, is probably good.
+// HT_MIN_BUCKETS is probably unnecessary since you can specify
+// (indirectly) the starting number of buckets at construct-time.
+// For enlarge_resize_percent, you can use this chart to try to trade-off
+// expected lookup time to the space taken up.  By default, this
+// code uses quadratic probing, though you can change it to linear
+// via _JUMP below if you really want to.
+//
+// From http://www.augustana.ca/~mohrj/courses/1999.fall/csc210/lecture_notes/hashing.html
+// NUMBER OF PROBES / LOOKUP       Successful            Unsuccessful
+// Quadratic collision resolution   1 - ln(1-L) - L/2    1/(1-L) - L - ln(1-L)
+// Linear collision resolution     [1+1/(1-L)]/2         [1+1/(1-L)2]/2
+//
+// -- enlarge_resize_percent --         0.10  0.50  0.60  0.75  0.80  0.90  0.99
+// QUADRATIC COLLISION RES.
+//    probes/successful lookup    1.05  1.44  1.62  2.01  2.21  2.85  5.11
+//    probes/unsuccessful lookup  1.11  2.19  2.82  4.64  5.81  11.4  103.6
+// LINEAR COLLISION RES.
+//    probes/successful lookup    1.06  1.5   1.75  2.5   3.0   5.5   50.5
+//    probes/unsuccessful lookup  1.12  2.5   3.6   8.5   13.0  50.0  5000.0
+//
+// The value type is required to be copy constructible and default
+// constructible, but it need not be (and commonly isn't) assignable.
+
+#ifndef _SPARSEHASHTABLE_H_
+#define _SPARSEHASHTABLE_H_
+
+#ifndef SPARSEHASH_STAT_UPDATE
+#define SPARSEHASH_STAT_UPDATE(x) ((void) 0)
+#endif
+
+// The probing method
+// Linear probing
+// #define JUMP_(key, num_probes)    ( 1 )
+// Quadratic-ish probing
+#define JUMP_(key, num_probes)    ( num_probes )
+
+
+#include <google/sparsehash/sparseconfig.h>
+#include <assert.h>
+#include <algorithm>              // For swap(), eg
+#include <iterator>               // for facts about iterator tags
+#include <utility>                // for pair<>
+#include <google/sparsetable>     // Since that's basically what we are
+
+_START_GOOGLE_NAMESPACE_
+
+using STL_NAMESPACE::pair;
+
+// Hashtable class, used to implement the hashed associative containers
+// hash_set and hash_map.
+//
+// Value: what is stored in the table (each bucket is a Value).
+// Key: something in a 1-to-1 correspondence to a Value, that can be used
+//      to search for a Value in the table (find() takes a Key).
+// HashFcn: Takes a Key and returns an integer, the more unique the better.
+// ExtractKey: given a Value, returns the unique Key associated with it.
+// SetKey: given a Value* and a Key, modifies the value such that
+//         ExtractKey(value) == key.  We guarantee this is only called
+//         with key == deleted_key.
+// EqualKey: Given two Keys, says whether they are the same (that is,
+//           if they are both associated with the same Value).
+// Alloc: STL allocator to use to allocate memory.  Currently ignored.
+
+template <class Value, class Key, class HashFcn,
+          class ExtractKey, class SetKey, class EqualKey, class Alloc>
+class sparse_hashtable;
+
+template <class V, class K, class HF, class ExK, class SetK, class EqK, class A>
+struct sparse_hashtable_iterator;
+
+template <class V, class K, class HF, class ExK, class SetK, class EqK, class A>
+struct sparse_hashtable_const_iterator;
+
+// As far as iterating, we're basically just a sparsetable
+// that skips over deleted elements.
+template <class V, class K, class HF, class ExK, class SetK, class EqK, class A>
+struct sparse_hashtable_iterator {
+ public:
+  typedef sparse_hashtable_iterator<V,K,HF,ExK,SetK,EqK,A>       iterator;
+  typedef sparse_hashtable_const_iterator<V,K,HF,ExK,SetK,EqK,A> const_iterator;
+  typedef typename sparsetable<V>::nonempty_iterator        st_iterator;
+
+  typedef STL_NAMESPACE::forward_iterator_tag iterator_category;
+  typedef V value_type;
+  typedef ptrdiff_t difference_type;
+  typedef size_t size_type;
+  typedef V& reference;                // Value
+  typedef V* pointer;
+
+  // "Real" constructor and default constructor
+  sparse_hashtable_iterator(const sparse_hashtable<V,K,HF,ExK,SetK,EqK,A> *h,
+                            st_iterator it, st_iterator it_end)
+    : ht(h), pos(it), end(it_end)   { advance_past_deleted(); }
+  sparse_hashtable_iterator() { }      // not ever used internally
+  // The default destructor is fine; we don't define one
+  // The default operator= is fine; we don't define one
+
+  // Happy dereferencer
+  reference operator*() const { return *pos; }
+  pointer operator->() const { return &(operator*()); }
+
+  // Arithmetic.  The only hard part is making sure that
+  // we're not on a marked-deleted array element
+  void advance_past_deleted() {
+    while ( pos != end && ht->test_deleted(*this) )
+      ++pos;
+  }
+  iterator& operator++()   {
+    assert(pos != end); ++pos; advance_past_deleted(); return *this;
+  }
+  iterator operator++(int) { iterator tmp(*this); ++*this; return tmp; }
+
+  // Comparison.
+  bool operator==(const iterator& it) const { return pos == it.pos; }
+  bool operator!=(const iterator& it) const { return pos != it.pos; }
+
+
+  // The actual data
+  const sparse_hashtable<V,K,HF,ExK,SetK,EqK,A> *ht;
+  st_iterator pos, end;
+};
+
+// Now do it all again, but with const-ness!
+template <class V, class K, class HF, class ExK, class SetK, class EqK, class A>
+struct sparse_hashtable_const_iterator {
+ public:
+  typedef sparse_hashtable_iterator<V,K,HF,ExK,SetK,EqK,A>       iterator;
+  typedef sparse_hashtable_const_iterator<V,K,HF,ExK,SetK,EqK,A> const_iterator;
+  typedef typename sparsetable<V>::const_nonempty_iterator  st_iterator;
+
+  typedef STL_NAMESPACE::forward_iterator_tag iterator_category;
+  typedef V value_type;
+  typedef ptrdiff_t difference_type;
+  typedef size_t size_type;
+  typedef const V& reference;                // Value
+  typedef const V* pointer;
+
+  // "Real" constructor and default constructor
+  sparse_hashtable_const_iterator(const sparse_hashtable<V,K,HF,ExK,SetK,EqK,A> *h,
+                                  st_iterator it, st_iterator it_end)
+    : ht(h), pos(it), end(it_end)   { advance_past_deleted(); }
+  // This lets us convert regular iterators to const iterators
+  sparse_hashtable_const_iterator() { }      // never used internally
+  sparse_hashtable_const_iterator(const iterator &it)
+    : ht(it.ht), pos(it.pos), end(it.end) { }
+  // The default destructor is fine; we don't define one
+  // The default operator= is fine; we don't define one
+
+  // Happy dereferencer
+  reference operator*() const { return *pos; }
+  pointer operator->() const { return &(operator*()); }
+
+  // Arithmetic.  The only hard part is making sure that
+  // we're not on a marked-deleted array element
+  void advance_past_deleted() {
+    while ( pos != end && ht->test_deleted(*this) )
+      ++pos;
+  }
+  const_iterator& operator++() {
+    assert(pos != end); ++pos; advance_past_deleted(); return *this;
+  }
+  const_iterator operator++(int) { const_iterator tmp(*this); ++*this; return tmp; }
+
+  // Comparison.
+  bool operator==(const const_iterator& it) const { return pos == it.pos; }
+  bool operator!=(const const_iterator& it) const { return pos != it.pos; }
+
+
+  // The actual data
+  const sparse_hashtable<V,K,HF,ExK,SetK,EqK,A> *ht;
+  st_iterator pos, end;
+};
+
+// And once again, but this time freeing up memory as we iterate
+template <class V, class K, class HF, class ExK, class SetK, class EqK, class A>
+struct sparse_hashtable_destructive_iterator {
+ public:
+  typedef sparse_hashtable_destructive_iterator<V,K,HF,ExK,SetK,EqK,A> iterator;
+  typedef typename sparsetable<V>::destructive_iterator     st_iterator;
+
+  typedef STL_NAMESPACE::forward_iterator_tag iterator_category;
+  typedef V value_type;
+  typedef ptrdiff_t difference_type;
+  typedef size_t size_type;
+  typedef V& reference;                // Value
+  typedef V* pointer;
+
+  // "Real" constructor and default constructor
+  sparse_hashtable_destructive_iterator(const
+                                        sparse_hashtable<V,K,HF,ExK,SetK,EqK,A> *h,
+                                        st_iterator it, st_iterator it_end)
+    : ht(h), pos(it), end(it_end)   { advance_past_deleted(); }
+  sparse_hashtable_destructive_iterator() { }          // never used internally
+  // The default destructor is fine; we don't define one
+  // The default operator= is fine; we don't define one
+
+  // Happy dereferencer
+  reference operator*() const { return *pos; }
+  pointer operator->() const { return &(operator*()); }
+
+  // Arithmetic.  The only hard part is making sure that
+  // we're not on a marked-deleted array element
+  void advance_past_deleted() {
+    while ( pos != end && ht->test_deleted(*this) )
+      ++pos;
+  }
+  iterator& operator++()   {
+    assert(pos != end); ++pos; advance_past_deleted(); return *this;
+  }
+  iterator operator++(int) { iterator tmp(*this); ++*this; return tmp; }
+
+  // Comparison.
+  bool operator==(const iterator& it) const { return pos == it.pos; }
+  bool operator!=(const iterator& it) const { return pos != it.pos; }
+
+
+  // The actual data
+  const sparse_hashtable<V,K,HF,ExK,SetK,EqK,A> *ht;
+  st_iterator pos, end;
+};
+
+
+template <class Value, class Key, class HashFcn,
+          class ExtractKey, class SetKey, class EqualKey, class Alloc>
+class sparse_hashtable {
+ public:
+  typedef Key key_type;
+  typedef Value value_type;
+  typedef HashFcn hasher;
+  typedef EqualKey key_equal;
+
+  typedef size_t            size_type;
+  typedef ptrdiff_t         difference_type;
+  typedef value_type*       pointer;
+  typedef const value_type* const_pointer;
+  typedef value_type&       reference;
+  typedef const value_type& const_reference;
+  typedef sparse_hashtable_iterator<Value, Key, HashFcn, ExtractKey,
+                                    SetKey, EqualKey, Alloc>
+  iterator;
+
+  typedef sparse_hashtable_const_iterator<Value, Key, HashFcn, ExtractKey,
+                                          SetKey, EqualKey, Alloc>
+  const_iterator;
+
+  typedef sparse_hashtable_destructive_iterator<Value, Key, HashFcn, ExtractKey,
+                                                SetKey, EqualKey, Alloc>
+  destructive_iterator;
+
+  // These come from tr1.  For us they're the same as regular iterators.
+  typedef iterator local_iterator;
+  typedef const_iterator const_local_iterator;
+
+  // How full we let the table get before we resize, by default.
+  // Knuth says .8 is good -- higher causes us to probe too much,
+  // though it saves memory.
+  static const float HT_OCCUPANCY_FLT; // = 0.8f;
+
+  // How empty we let the table get before we resize lower, by default.
+  // It should be less than OCCUPANCY_FLT / 2 or we thrash resizing
+  static const float HT_EMPTY_FLT; // = 0.4 * HT_OCCUPANCY_FLT;
+
+  // Minimum size we're willing to let hashtables be.
+  // Must be a power of two, and at least 4.
+  // Note, however, that for a given hashtable, the minimum size is
+  // determined by the first constructor arg, and may be >HT_MIN_BUCKETS.
+  static const size_t HT_MIN_BUCKETS = 4;
+
+  // By default, if you don't specify a hashtable size at
+  // construction-time, we use this size.  Must be a power of two, and
+  // at least HT_MIN_BUCKETS.
+  static const size_t HT_DEFAULT_STARTING_BUCKETS = 32;
+
+  // ITERATOR FUNCTIONS
+  iterator begin()             { return iterator(this, table.nonempty_begin(),
+                                                 table.nonempty_end()); }
+  iterator end()               { return iterator(this, table.nonempty_end(),
+                                                 table.nonempty_end()); }
+  const_iterator begin() const { return const_iterator(this,
+                                                       table.nonempty_begin(),
+                                                       table.nonempty_end()); }
+  const_iterator end() const   { return const_iterator(this,
+                                                       table.nonempty_end(),
+                                                       table.nonempty_end()); }
+
+  // These come from tr1 unordered_map.  They iterate over 'bucket' n.
+  // For sparsehashtable, we could consider each 'group' to be a bucket,
+  // I guess, but I don't really see the point.  We'll just consider
+  // bucket n to be the n-th element of the sparsetable, if it's occupied,
+  // or some empty element, otherwise.
+  local_iterator begin(size_type i) {
+    if (table.test(i))
+      return local_iterator(this, table.get_iter(i), table.nonempty_end());
+    else
+      return local_iterator(this, table.nonempty_end(), table.nonempty_end());
+  }
+  local_iterator end(size_type i) {
+    local_iterator it = begin(i);
+    if (table.test(i) && !test_deleted(i))
+      ++it;
+    return it;
+  }
+  const_local_iterator begin(size_type i) const {
+    if (table.test(i))
+      return const_local_iterator(this, table.get_iter(i),
+                                  table.nonempty_end());
+    else
+      return const_local_iterator(this, table.nonempty_end(),
+                                  table.nonempty_end());
+  }
+  const_local_iterator end(size_type i) const {
+    const_local_iterator it = begin(i);
+    if (table.test(i) && !test_deleted(i))
+      ++it;
+    return it;
+  }
+
+  // This is used when resizing
+  destructive_iterator destructive_begin() {
+    return destructive_iterator(this, table.destructive_begin(),
+                                table.destructive_end());
+  }
+  destructive_iterator destructive_end() {
+    return destructive_iterator(this, table.destructive_end(),
+                                table.destructive_end());
+  }
+
+
+  // ACCESSOR FUNCTIONS for the things we templatize on, basically
+  hasher hash_funct() const { return hash; }
+  key_equal key_eq() const  { return equals; }
+
+ private:
+  // We need to copy values when we set the special marker for deleted
+  // elements, but, annoyingly, we can't just use the copy assignment
+  // operator because value_type might not be assignable (it's often
+  // pair<const X, Y>).  We use explicit destructor invocation and
+  // placement new to get around this.  Arg.
+  void set_value(value_type* dst, const value_type src) {
+    dst->~value_type();   // delete the old value, if any
+    new(dst) value_type(src);
+  }
+
+  // This is used as a tag for the copy constructor, saying to destroy its
+  // arg We have two ways of destructively copying: with potentially growing
+  // the hashtable as we copy, and without.  To make sure the outside world
+  // can't do a destructive copy, we make the typename private.
+  enum MoveDontCopyT {MoveDontCopy, MoveDontGrow};
+
+
+  // DELETE HELPER FUNCTIONS
+  // This lets the user describe a key that will indicate deleted
+  // table entries.  This key should be an "impossible" entry --
+  // if you try to insert it for real, you won't be able to retrieve it!
+  // (NB: while you pass in an entire value, only the key part is looked
+  // at.  This is just because I don't know how to assign just a key.)
+ private:
+  void squash_deleted() {           // gets rid of any deleted entries we have
+    if ( num_deleted ) {            // get rid of deleted before writing
+      sparse_hashtable tmp(MoveDontGrow, *this);
+      swap(tmp);                    // now we are tmp
+    }
+    assert(num_deleted == 0);
+  }
+
+ public:
+  void set_deleted_key(const key_type &key) {
+    // It's only safe to change what "deleted" means if we purge deleted guys
+    squash_deleted();
+    use_deleted = true;
+    delkey = key;
+  }
+  void clear_deleted_key() {
+    squash_deleted();
+    use_deleted = false;
+  }
+
+  // These are public so the iterators can use them
+  // True if the item at position bucknum is "deleted" marker
+  bool test_deleted(size_type bucknum) const {
+    // The num_deleted test is crucial for read(): after read(), the ht values
+    // are garbage, and we don't want to think some of them are deleted.
+    return (use_deleted && num_deleted > 0 && table.test(bucknum) &&
+            equals(delkey, get_key(table.unsafe_get(bucknum))));
+  }
+  bool test_deleted(const iterator &it) const {
+    return (use_deleted && num_deleted > 0 &&
+            equals(delkey, get_key(*it)));
+  }
+  bool test_deleted(const const_iterator &it) const {
+    return (use_deleted && num_deleted > 0 &&
+            equals(delkey, get_key(*it)));
+  }
+  bool test_deleted(const destructive_iterator &it) const {
+    return (use_deleted && num_deleted > 0 &&
+            equals(delkey, get_key(*it)));
+  }
+  // Set it so test_deleted is true.  true if object didn't used to be deleted
+  // See below (at erase()) to explain why we allow const_iterators
+  bool set_deleted(const_iterator &it) {
+    assert(use_deleted);             // bad if set_deleted_key() wasn't called
+    bool retval = !test_deleted(it);
+    // &* converts from iterator to value-type
+    set_key(const_cast<value_type*>(&(*it)), delkey);
+    return retval;
+  }
+  // Set it so test_deleted is false.  true if object used to be deleted
+  bool clear_deleted(const_iterator &it) {
+    assert(use_deleted);             // bad if set_deleted_key() wasn't called
+    // happens automatically when we assign something else in its place
+    return test_deleted(it);
+  }
+
+
+  // FUNCTIONS CONCERNING SIZE
+  size_type size() const      { return table.num_nonempty() - num_deleted; }
+  // Buckets are always a power of 2
+  size_type max_size() const          { return (size_type(-1) >> 1U) + 1; }
+  bool empty() const                  { return size() == 0; }
+  size_type bucket_count() const      { return table.size(); }
+  size_type max_bucket_count() const  { return max_size(); }
+  // These are tr1 methods.  Their idea of 'bucket' doesn't map well to
+  // what we do.  We just say every bucket has 0 or 1 items in it.
+  size_type bucket_size(size_type i) const {
+    return begin(i) == end(i) ? 0 : 1;
+  }
+
+
+ private:
+  // Because of the above, size_type(-1) is never legal; use it for errors
+  static const size_type ILLEGAL_BUCKET = size_type(-1);
+
+ private:
+  // This is the smallest size a hashtable can be without being too crowded
+  // If you like, you can give a min #buckets as well as a min #elts
+  size_type min_size(size_type num_elts, size_type min_buckets_wanted) {
+    size_type sz = HT_MIN_BUCKETS;
+    while ( sz < min_buckets_wanted || num_elts >= sz * enlarge_resize_percent )
+      sz *= 2;
+    return sz;
+  }
+
+  // Used after a string of deletes
+  void maybe_shrink() {
+    assert(table.num_nonempty() >= num_deleted);
+    assert((bucket_count() & (bucket_count()-1)) == 0); // is a power of two
+    assert(bucket_count() >= HT_MIN_BUCKETS);
+
+    // If you construct a hashtable with < HT_DEFAULT_STARTING_BUCKETS,
+    // we'll never shrink until you get relatively big, and we'll never
+    // shrink below HT_DEFAULT_STARTING_BUCKETS.  Otherwise, something
+    // like "dense_hash_set<int> x; x.insert(4); x.erase(4);" will
+    // shrink us down to HT_MIN_BUCKETS buckets, which is too small.
+    if (shrink_threshold > 0
+        && (table.num_nonempty()-num_deleted) < shrink_threshold &&
+        bucket_count() > HT_DEFAULT_STARTING_BUCKETS ) {
+      size_type sz = bucket_count() / 2;    // find how much we should shrink
+      while ( sz > HT_DEFAULT_STARTING_BUCKETS &&
+              (table.num_nonempty() - num_deleted) <= sz *
+              shrink_resize_percent )
+        sz /= 2;                            // stay a power of 2
+      sparse_hashtable tmp(MoveDontCopy, *this, sz);
+      swap(tmp);                            // now we are tmp
+    }
+    consider_shrink = false;                // because we just considered it
+  }
+
+  // We'll let you resize a hashtable -- though this makes us copy all!
+  // When you resize, you say, "make it big enough for this many more elements"
+  void resize_delta(size_type delta) {
+    if ( consider_shrink )                   // see if lots of deletes happened
+      maybe_shrink();
+    if ( bucket_count() >= HT_MIN_BUCKETS &&
+         (table.num_nonempty() + delta) <= enlarge_threshold )
+      return;                                // we're ok as we are
+
+    // Sometimes, we need to resize just to get rid of all the
+    // "deleted" buckets that are clogging up the hashtable.  So when
+    // deciding whether to resize, count the deleted buckets (which
+    // are currently taking up room).  But later, when we decide what
+    // size to resize to, *don't* count deleted buckets, since they
+    // get discarded during the resize.
+    const size_type needed_size = min_size(table.num_nonempty() + delta, 0);
+    if ( needed_size > bucket_count() ) {      // we don't have enough buckets
+      const size_type resize_to = min_size(table.num_nonempty() - num_deleted
+                                           + delta, 0);
+      sparse_hashtable tmp(MoveDontCopy, *this, resize_to);
+      swap(tmp);                             // now we are tmp
+    }
+  }
+
+  // Used to actually do the rehashing when we grow/shrink a hashtable
+  void copy_from(const sparse_hashtable &ht, size_type min_buckets_wanted) {
+    clear();            // clear table, set num_deleted to 0
+
+    // If we need to change the size of our table, do it now
+    const size_type resize_to = min_size(ht.size(), min_buckets_wanted);
+    if ( resize_to > bucket_count() ) {      // we don't have enough buckets
+      table.resize(resize_to);               // sets the number of buckets
+      reset_thresholds();
+    }
+
+    // We use a normal iterator to get non-deleted bcks from ht
+    // We could use insert() here, but since we know there are
+    // no duplicates and no deleted items, we can be more efficient
+    assert( (bucket_count() & (bucket_count()-1)) == 0);      // a power of two
+    for ( const_iterator it = ht.begin(); it != ht.end(); ++it ) {
+      size_type num_probes = 0;              // how many times we've probed
+      size_type bucknum;
+      const size_type bucket_count_minus_one = bucket_count() - 1;
+      for (bucknum = hash(get_key(*it)) & bucket_count_minus_one;
+           table.test(bucknum);                          // not empty
+           bucknum = (bucknum + JUMP_(key, num_probes)) & bucket_count_minus_one) {
+        ++num_probes;
+        assert(num_probes < bucket_count()); // or else the hashtable is full
+      }
+      table.set(bucknum, *it);               // copies the value to here
+    }
+  }
+
+  // Implementation is like copy_from, but it destroys the table of the
+  // "from" guy by freeing sparsetable memory as we iterate.  This is
+  // useful in resizing, since we're throwing away the "from" guy anyway.
+  void move_from(MoveDontCopyT mover, sparse_hashtable &ht,
+                 size_type min_buckets_wanted) {
+    clear();            // clear table, set num_deleted to 0
+
+    // If we need to change the size of our table, do it now
+    size_t resize_to;
+    if ( mover == MoveDontGrow )
+      resize_to = ht.bucket_count();         // keep same size as old ht
+    else                                     // MoveDontCopy
+      resize_to = min_size(ht.size(), min_buckets_wanted);
+    if ( resize_to > bucket_count() ) {      // we don't have enough buckets
+      table.resize(resize_to);               // sets the number of buckets
+      reset_thresholds();
+    }
+
+    // We use a normal iterator to get non-deleted bcks from ht
+    // We could use insert() here, but since we know there are
+    // no duplicates and no deleted items, we can be more efficient
+    assert( (bucket_count() & (bucket_count()-1)) == 0);      // a power of two
+    // THIS IS THE MAJOR LINE THAT DIFFERS FROM COPY_FROM():
+    for ( destructive_iterator it = ht.destructive_begin();
+          it != ht.destructive_end(); ++it ) {
+      size_type num_probes = 0;              // how many times we've probed
+      size_type bucknum;
+      for ( bucknum = hash(get_key(*it)) & (bucket_count()-1);  // h % buck_cnt
+            table.test(bucknum);                          // not empty
+            bucknum = (bucknum + JUMP_(key, num_probes)) & (bucket_count()-1) ) {
+        ++num_probes;
+        assert(num_probes < bucket_count()); // or else the hashtable is full
+      }
+      table.set(bucknum, *it);               // copies the value to here
+    }
+  }
+
+
+  // Required by the spec for hashed associative container
+ public:
+  // Though the docs say this should be num_buckets, I think it's much
+  // more useful as num_elements.  As a special feature, calling with
+  // req_elements==0 will cause us to shrink if we can, saving space.
+  void resize(size_type req_elements) {       // resize to this or larger
+    if ( consider_shrink || req_elements == 0 )
+      maybe_shrink();
+    if ( req_elements > table.num_nonempty() )    // we only grow
+      resize_delta(req_elements - table.num_nonempty());
+  }
+
+  // Get and change the value of shrink_resize_percent and
+  // enlarge_resize_percent.  The description at the beginning of this
+  // file explains how to choose the values.  Setting the shrink
+  // parameter to 0.0 ensures that the table never shrinks.
+  void get_resizing_parameters(float* shrink, float* grow) const {
+    *shrink = shrink_resize_percent;
+    *grow = enlarge_resize_percent;
+  }
+  void set_resizing_parameters(float shrink, float grow) {
+    assert(shrink >= 0.0);
+    assert(grow <= 1.0);
+    if (shrink > grow/2.0f)
+      shrink = grow / 2.0f;     // otherwise we thrash hashtable size
+    shrink_resize_percent = shrink;
+    enlarge_resize_percent = grow;
+    reset_thresholds();
+  }
+
+  // CONSTRUCTORS -- as required by the specs, we take a size,
+  // but also let you specify a hashfunction, key comparator,
+  // and key extractor.  We also define a copy constructor and =.
+  // DESTRUCTOR -- the default is fine, surprisingly.
+  explicit sparse_hashtable(size_type expected_max_items_in_table = 0,
+                            const HashFcn& hf = HashFcn(),
+                            const EqualKey& eql = EqualKey(),
+                            const SetKey& set = SetKey(),
+                            const ExtractKey& ext = ExtractKey())
+    : hash(hf), equals(eql), get_key(ext), set_key(set), num_deleted(0),
+      use_deleted(false), delkey(), enlarge_resize_percent(HT_OCCUPANCY_FLT),
+      shrink_resize_percent(HT_EMPTY_FLT),
+      table(expected_max_items_in_table == 0
+            ? HT_DEFAULT_STARTING_BUCKETS
+            : min_size(expected_max_items_in_table, 0)) {
+    reset_thresholds();
+  }
+
+  // As a convenience for resize(), we allow an optional second argument
+  // which lets you make this new hashtable a different size than ht.
+  // We also provide a mechanism of saying you want to "move" the ht argument
+  // into us instead of copying.
+  sparse_hashtable(const sparse_hashtable& ht,
+                   size_type min_buckets_wanted = HT_DEFAULT_STARTING_BUCKETS)
+    : hash(ht.hash), equals(ht.equals),
+      get_key(ht.get_key), set_key(ht.set_key), num_deleted(0),
+      use_deleted(ht.use_deleted), delkey(ht.delkey),
+      enlarge_resize_percent(ht.enlarge_resize_percent),
+      shrink_resize_percent(ht.shrink_resize_percent),
+      table() {
+    reset_thresholds();
+    copy_from(ht, min_buckets_wanted);   // copy_from() ignores deleted entries
+  }
+  sparse_hashtable(MoveDontCopyT mover, sparse_hashtable& ht,
+                   size_type min_buckets_wanted = HT_DEFAULT_STARTING_BUCKETS)
+    : hash(ht.hash), equals(ht.equals), get_key(ht.get_key),
+      num_deleted(0), use_deleted(ht.use_deleted), delkey(ht.delkey),
+      enlarge_resize_percent(ht.enlarge_resize_percent),
+      shrink_resize_percent(ht.shrink_resize_percent),
+      table() {
+    reset_thresholds();
+    move_from(mover, ht, min_buckets_wanted);  // ignores deleted entries
+  }
+
+  sparse_hashtable& operator= (const sparse_hashtable& ht) {
+    if (&ht == this)  return *this;        // don't copy onto ourselves
+    clear();
+    hash = ht.hash;
+    equals = ht.equals;
+    get_key = ht.get_key;
+    set_key = ht.set_key;
+    use_deleted = ht.use_deleted;
+    delkey = ht.delkey;
+    copy_from(ht, HT_MIN_BUCKETS);         // sets num_deleted to 0 too
+    return *this;
+  }
+
+  // Many STL algorithms use swap instead of copy constructors
+  void swap(sparse_hashtable& ht) {
+    STL_NAMESPACE::swap(hash, ht.hash);
+    STL_NAMESPACE::swap(equals, ht.equals);
+    STL_NAMESPACE::swap(get_key, ht.get_key);
+    STL_NAMESPACE::swap(set_key, ht.set_key);
+    STL_NAMESPACE::swap(num_deleted, ht.num_deleted);
+    STL_NAMESPACE::swap(use_deleted, ht.use_deleted);
+    STL_NAMESPACE::swap(enlarge_resize_percent, ht.enlarge_resize_percent);
+    STL_NAMESPACE::swap(shrink_resize_percent, ht.shrink_resize_percent);
+    STL_NAMESPACE::swap(delkey, ht.delkey);
+    table.swap(ht.table);
+    reset_thresholds();
+    ht.reset_thresholds();
+  }
+
+  // It's always nice to be able to clear a table without deallocating it
+  void clear() {
+    table.clear();
+    reset_thresholds();
+    num_deleted = 0;
+  }
+
+
+  // LOOKUP ROUTINES
+ private:
+  // Returns a pair of positions: 1st where the object is, 2nd where
+  // it would go if you wanted to insert it.  1st is ILLEGAL_BUCKET
+  // if object is not found; 2nd is ILLEGAL_BUCKET if it is.
+  // Note: because of deletions where-to-insert is not trivial: it's the
+  // first deleted bucket we see, as long as we don't find the key later
+  pair<size_type, size_type> find_position(const key_type &key) const {
+    size_type num_probes = 0;              // how many times we've probed
+    const size_type bucket_count_minus_one = bucket_count() - 1;
+    size_type bucknum = hash(key) & bucket_count_minus_one;
+    size_type insert_pos = ILLEGAL_BUCKET; // where we would insert
+    SPARSEHASH_STAT_UPDATE(total_lookups += 1);
+    while ( 1 ) {                          // probe until something happens
+      if ( !table.test(bucknum) ) {        // bucket is empty
+        SPARSEHASH_STAT_UPDATE(total_probes += num_probes);
+        if ( insert_pos == ILLEGAL_BUCKET )  // found no prior place to insert
+          return pair<size_type,size_type>(ILLEGAL_BUCKET, bucknum);
+        else
+          return pair<size_type,size_type>(ILLEGAL_BUCKET, insert_pos);
+
+      } else if ( test_deleted(bucknum) ) {// keep searching, but mark to insert
+        if ( insert_pos == ILLEGAL_BUCKET )
+          insert_pos = bucknum;
+
+      } else if ( equals(key, get_key(table.unsafe_get(bucknum))) ) {
+        SPARSEHASH_STAT_UPDATE(total_probes += num_probes);
+        return pair<size_type,size_type>(bucknum, ILLEGAL_BUCKET);
+      }
+      ++num_probes;                        // we're doing another probe
+      bucknum = (bucknum + JUMP_(key, num_probes)) & bucket_count_minus_one;
+      assert(num_probes < bucket_count()); // don't probe too many times!
+    }
+  }
+
+ public:
+  iterator find(const key_type& key) {
+    if ( size() == 0 ) return end();
+    pair<size_type, size_type> pos = find_position(key);
+    if ( pos.first == ILLEGAL_BUCKET )     // alas, not there
+      return end();
+    else
+      return iterator(this, table.get_iter(pos.first), table.nonempty_end());
+  }
+
+  const_iterator find(const key_type& key) const {
+    if ( size() == 0 ) return end();
+    pair<size_type, size_type> pos = find_position(key);
+    if ( pos.first == ILLEGAL_BUCKET )     // alas, not there
+      return end();
+    else
+      return const_iterator(this,
+                            table.get_iter(pos.first), table.nonempty_end());
+  }
+
+  // This is a tr1 method: the bucket a given key is in, or what bucket
+  // it would be put in, if it were to be inserted.  Shrug.
+  size_type bucket(const key_type& key) const {
+    pair<size_type, size_type> pos = find_position(key);
+    return pos.first == ILLEGAL_BUCKET ? pos.second : pos.first;
+  }
+
+  // Counts how many elements have key key.  For maps, it's either 0 or 1.
+  size_type count(const key_type &key) const {
+    pair<size_type, size_type> pos = find_position(key);
+    return pos.first == ILLEGAL_BUCKET ? 0 : 1;
+  }
+
+  // Likewise, equal_range doesn't really make sense for us.  Oh well.
+  pair<iterator,iterator> equal_range(const key_type& key) {
+    iterator pos = find(key);      // either an iterator or end
+    if (pos == end()) {
+      return pair<iterator,iterator>(pos, pos);
+    } else {
+      const iterator startpos = pos++;
+      return pair<iterator,iterator>(startpos, pos);
+    }
+  }
+  pair<const_iterator,const_iterator> equal_range(const key_type& key) const {
+    const_iterator pos = find(key);      // either an iterator or end
+    if (pos == end()) {
+      return pair<const_iterator,const_iterator>(pos, pos);
+    } else {
+      const const_iterator startpos = pos++;
+      return pair<const_iterator,const_iterator>(startpos, pos);
+    }
+  }
+
+
+  // INSERTION ROUTINES
+ private:
+  // If you know *this is big enough to hold obj, use this routine
+  pair<iterator, bool> insert_noresize(const value_type& obj) {
+    // First, double-check we're not inserting delkey
+    assert(!use_deleted || !equals(get_key(obj), delkey));
+    const pair<size_type,size_type> pos = find_position(get_key(obj));
+    if ( pos.first != ILLEGAL_BUCKET) {      // object was already there
+      return pair<iterator,bool>(iterator(this, table.get_iter(pos.first),
+                                          table.nonempty_end()),
+                                 false);          // false: we didn't insert
+    } else {                                 // pos.second says where to put it
+      if ( test_deleted(pos.second) ) {      // just replace if it's been del.
+        // The set() below will undelete this object.  We just worry about stats
+        assert(num_deleted > 0);
+        --num_deleted;                       // used to be, now it isn't
+      }
+      table.set(pos.second, obj);
+      return pair<iterator,bool>(iterator(this, table.get_iter(pos.second),
+                                          table.nonempty_end()),
+                                 true);           // true: we did insert
+    }
+  }
+
+ public:
+  // This is the normal insert routine, used by the outside world
+  pair<iterator, bool> insert(const value_type& obj) {
+    resize_delta(1);  // adding an object, grow if need be
+    return insert_noresize(obj);
+  }
+
+  // When inserting a lot at a time, we specialize on the type of iterator
+  template <class InputIterator>
+  void insert(InputIterator f, InputIterator l) {
+    // specializes on iterator type
+    insert(f, l, typename STL_NAMESPACE::iterator_traits<InputIterator>::iterator_category());
+  }
+
+  // Iterator supports operator-, resize before inserting
+  template <class ForwardIterator>
+  void insert(ForwardIterator f, ForwardIterator l,
+              STL_NAMESPACE::forward_iterator_tag) {
+    size_type n = STL_NAMESPACE::distance(f, l);   // TODO(csilvers): standard?
+    resize_delta(n);
+    for ( ; n > 0; --n, ++f)
+      insert_noresize(*f);
+  }
+
+  // Arbitrary iterator, can't tell how much to resize
+  template <class InputIterator>
+  void insert(InputIterator f, InputIterator l,
+              STL_NAMESPACE::input_iterator_tag) {
+    for ( ; f != l; ++f)
+      insert(*f);
+  }
+
+
+  // DELETION ROUTINES
+  size_type erase(const key_type& key) {
+    // First, double-check we're not erasing delkey
+    assert(!use_deleted || !equals(key, delkey));
+    const_iterator pos = find(key);   // shrug: shouldn't need to be const
+    if ( pos != end() ) {
+      assert(!test_deleted(pos));  // or find() shouldn't have returned it
+      set_deleted(pos);
+      ++num_deleted;
+      consider_shrink = true;      // will think about shrink after next insert
+      return 1;                    // because we deleted one thing
+    } else {
+      return 0;                    // because we deleted nothing
+    }
+  }
+
+  // This is really evil: really it should be iterator, not const_iterator.
+  // But...the only reason keys are const is to allow lookup.
+  // Since that's a moot issue for deleted keys, we allow const_iterators
+  void erase(const_iterator pos) {
+    if ( pos == end() ) return;    // sanity check
+    if ( set_deleted(pos) ) {      // true if object has been newly deleted
+      ++num_deleted;
+      consider_shrink = true;      // will think about shrink after next insert
+    }
+  }
+
+  void erase(const_iterator f, const_iterator l) {
+    for ( ; f != l; ++f) {
+      if ( set_deleted(f)  )       // should always be true
+        ++num_deleted;
+    }
+    consider_shrink = true;        // will think about shrink after next insert
+  }
+
+
+  // COMPARISON
+  bool operator==(const sparse_hashtable& ht) const {
+    // We really want to check that the hash functions are the same
+    // but alas there's no way to do this.  We just hope.
+    return ( num_deleted == ht.num_deleted && table == ht.table );
+  }
+  bool operator!=(const sparse_hashtable& ht) const {
+    return !(*this == ht);
+  }
+
+
+  // I/O
+  // We support reading and writing hashtables to disk.  NOTE that
+  // this only stores the hashtable metadata, not the stuff you've
+  // actually put in the hashtable!  Alas, since I don't know how to
+  // write a hasher or key_equal, you have to make sure everything
+  // but the table is the same.  We compact before writing.
+  bool write_metadata(FILE *fp) {
+    squash_deleted();           // so we don't have to worry about delkey
+    return table.write_metadata(fp);
+  }
+
+  bool read_metadata(FILE *fp) {
+    num_deleted = 0;            // since we got rid before writing
+    bool result = table.read_metadata(fp);
+    reset_thresholds();
+    return result;
+  }
+
+  // Only meaningful if value_type is a POD.
+  bool write_nopointer_data(FILE *fp) {
+    return table.write_nopointer_data(fp);
+  }
+
+  // Only meaningful if value_type is a POD.
+  bool read_nopointer_data(FILE *fp) {
+    return table.read_nopointer_data(fp);
+  }
+
+ private:
+  // The actual data
+  hasher hash;                      // required by hashed_associative_container
+  key_equal equals;
+  ExtractKey get_key;
+  SetKey set_key;
+  size_type num_deleted;        // how many occupied buckets are marked deleted
+  bool use_deleted;                          // false until delkey has been set
+  // TODO(csilvers): make a pointer, and get rid of use_deleted (benchmark!)
+  key_type delkey;                           // which key marks deleted entries
+  float enlarge_resize_percent;                       // how full before resize
+  float shrink_resize_percent;                       // how empty before resize
+  size_type shrink_threshold;           // table.size() * shrink_resize_percent
+  size_type enlarge_threshold;         // table.size() * enlarge_resize_percent
+  sparsetable<value_type> table;      // holds num_buckets and num_elements too
+  bool consider_shrink;   // true if we should try to shrink before next insert
+
+  void reset_thresholds() {
+    enlarge_threshold = static_cast<size_type>(table.size()
+                                               * enlarge_resize_percent);
+    shrink_threshold = static_cast<size_type>(table.size()
+                                              * shrink_resize_percent);
+    consider_shrink = false;   // whatever caused us to reset already considered
+  }
+};
+
+// We need a global swap as well
+template <class V, class K, class HF, class ExK, class SetK, class EqK, class A>
+inline void swap(sparse_hashtable<V,K,HF,ExK,SetK,EqK,A> &x,
+                 sparse_hashtable<V,K,HF,ExK,SetK,EqK,A> &y) {
+  x.swap(y);
+}
+
+#undef JUMP_
+
+template <class V, class K, class HF, class ExK, class SetK, class EqK, class A>
+const typename sparse_hashtable<V,K,HF,ExK,SetK,EqK,A>::size_type
+  sparse_hashtable<V,K,HF,ExK,SetK,EqK,A>::ILLEGAL_BUCKET;
+
+// How full we let the table get before we resize.  Knuth says .8 is
+// good -- higher causes us to probe too much, though saves memory
+template <class V, class K, class HF, class ExK, class SetK, class EqK, class A>
+const float sparse_hashtable<V,K,HF,ExK,SetK,EqK,A>::HT_OCCUPANCY_FLT = 0.8f;
+
+// How empty we let the table get before we resize lower.
+// It should be less than OCCUPANCY_FLT / 2 or we thrash resizing
+template <class V, class K, class HF, class ExK, class SetK, class EqK, class A>
+const float sparse_hashtable<V,K,HF,ExK,SetK,EqK,A>::HT_EMPTY_FLT = 0.4f *
+sparse_hashtable<V,K,HF,ExK,SetK,EqK,A>::HT_OCCUPANCY_FLT;
+
+_END_GOOGLE_NAMESPACE_
+
+#endif /* _SPARSEHASHTABLE_H_ */