passenger 2.2.15 → 3.0.0.pre1

data/ext/google/dense_hash_set

@@ -0,0 +1,287 @@
+// Copyright (c) 2005, Google Inc.
+// All rights reserved.
+// 
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are
+// met:
+// 
+//     * Redistributions of source code must retain the above copyright
+// notice, this list of conditions and the following disclaimer.
+//     * Redistributions in binary form must reproduce the above
+// copyright notice, this list of conditions and the following disclaimer
+// in the documentation and/or other materials provided with the
+// distribution.
+//     * Neither the name of Google Inc. nor the names of its
+// contributors may be used to endorse or promote products derived from
+// this software without specific prior written permission.
+// 
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+// ---
+// Author: Craig Silverstein
+//
+// This is just a very thin wrapper over densehashtable.h, just
+// like sgi stl's stl_hash_set is a very thin wrapper over
+// stl_hashtable.  The major thing we define is operator[], because
+// we have a concept of a data_type which stl_hashtable doesn't
+// (it only has a key and a value).
+//
+// This is more different from dense_hash_map than you might think,
+// because all iterators for sets are const (you obviously can't
+// change the key, and for sets there is no value).
+//
+// NOTE: this is exactly like sparse_hash_set.h, with the word
+// "sparse" replaced by "dense", except for the addition of
+// set_empty_key().
+//
+//   YOU MUST CALL SET_EMPTY_KEY() IMMEDIATELY AFTER CONSTRUCTION.
+//
+// Otherwise your program will die in mysterious ways.
+//
+// In other respects, we adhere mostly to the STL semantics for
+// hash-set.  One important exception is that insert() invalidates
+// iterators entirely.  On the plus side, though, erase() doesn't
+// invalidate iterators at all, or even change the ordering of elements.
+//
+// Here are a few "power user" tips:
+//
+//    1) set_deleted_key():
+//         If you want to use erase() you must call set_deleted_key(),
+//         in addition to set_empty_key(), after construction.
+//         The deleted and empty keys must differ.
+//
+//    2) resize(0):
+//         When an item is deleted, its memory isn't freed right
+//         away.  This allows you to iterate over a hashtable,
+//         and call erase(), without invalidating the iterator.
+//         To force the memory to be freed, call resize(0).
+//         For tr1 compatibility, this can also be called as rehash(0).
+//
+//    3) min_load_factor(0.0)
+//         Setting the minimum load factor to 0.0 guarantees that
+//         the hash table will never shrink.
+//
+// Guide to what kind of hash_set to use:
+//   (1) dense_hash_set: fastest, uses the most memory
+//   (2) sparse_hash_set: slowest, uses the least memory
+//   (3) hash_set (STL): in the middle
+// Typically I use sparse_hash_set when I care about space and/or when
+// I need to save the hashtable on disk.  I use hash_set otherwise.  I
+// don't personally use dense_hash_set ever; some people use it for
+// small sets with lots of lookups.
+//
+// - dense_hash_set has, typically, a factor of 2 memory overhead (if your
+//   data takes up X bytes, the hash_set uses X more bytes in overhead).
+// - sparse_hash_set has about 2 bits overhead per entry.
+// - sparse_hash_map can be 3-7 times slower than the others for lookup and,
+//   especially, inserts.  See time_hash_map.cc for details.
+//
+// See /usr/(local/)?doc/sparsehash-*/dense_hash_set.html
+// for information about how to use this class.
+
+#ifndef _DENSE_HASH_SET_H_
+#define _DENSE_HASH_SET_H_
+
+#include <google/sparsehash/sparseconfig.h>
+#include <stdio.h>                   // for FILE * in read()/write()
+#include <algorithm>                 // for the default template args
+#include <functional>                // for equal_to
+#include <memory>                    // for alloc<>
+#include <utility>                   // for pair<>
+#include HASH_FUN_H                  // defined in config.h
+#include <google/sparsehash/densehashtable.h>
+
+
+_START_GOOGLE_NAMESPACE_
+
+using STL_NAMESPACE::pair;
+
+template <class Value,
+          class HashFcn = SPARSEHASH_HASH<Value>,  // defined in sparseconfig.h
+          class EqualKey = STL_NAMESPACE::equal_to<Value>, 
+          class Alloc = STL_NAMESPACE::allocator<Value> >
+class dense_hash_set {
+ private:
+  // Apparently identity is not stl-standard, so we define our own
+  struct Identity {
+    Value& operator()(Value& v) const { return v; }
+    const Value& operator()(const Value& v) const { return v; }
+  };
+  struct SetKey {
+    void operator()(Value* value, const Value& new_key) const {
+      *value = new_key;
+    }
+  };
+
+  // The actual data
+  typedef dense_hashtable<Value, Value, HashFcn,
+                          Identity, SetKey, EqualKey, Alloc> ht;
+  ht rep;
+
+ public:
+  typedef typename ht::key_type key_type;
+  typedef typename ht::value_type value_type;
+  typedef typename ht::hasher hasher;
+  typedef typename ht::key_equal key_equal;
+  typedef Alloc allocator_type;
+
+  typedef typename ht::size_type size_type;
+  typedef typename ht::difference_type difference_type;
+  typedef typename ht::const_pointer pointer;
+  typedef typename ht::const_pointer const_pointer;
+  typedef typename ht::const_reference reference;
+  typedef typename ht::const_reference const_reference;
+
+  typedef typename ht::const_iterator iterator;
+  typedef typename ht::const_iterator const_iterator;
+  typedef typename ht::const_local_iterator local_iterator;
+  typedef typename ht::const_local_iterator const_local_iterator;
+
+
+  // Iterator functions -- recall all iterators are const
+  iterator begin() const                  { return rep.begin(); }
+  iterator end() const                    { return rep.end(); }
+
+  // These come from tr1's unordered_set. For us, a bucket has 0 or 1 elements.
+  local_iterator begin(size_type i) const { return rep.begin(i); }
+  local_iterator end(size_type i) const   { return rep.end(i); }
+
+
+  // Accessor functions
+  hasher hash_funct() const               { return rep.hash_funct(); }
+  key_equal key_eq() const                { return rep.key_eq(); }
+
+
+  // Constructors
+  explicit dense_hash_set(size_type expected_max_items_in_table = 0,
+                          const hasher& hf = hasher(),
+                          const key_equal& eql = key_equal())
+    : rep(expected_max_items_in_table, hf, eql) { }
+
+  template <class InputIterator>
+  dense_hash_set(InputIterator f, InputIterator l,
+                 size_type expected_max_items_in_table = 0,
+                 const hasher& hf = hasher(),
+                 const key_equal& eql = key_equal())
+      : rep(expected_max_items_in_table, hf, eql) {
+    rep.insert(f, l);
+  }
+  // We use the default copy constructor
+  // We use the default operator=()
+  // We use the default destructor
+
+  void clear()                        { rep.clear(); }
+  // This clears the hash set without resizing it down to the minimum
+  // bucket count, but rather keeps the number of buckets constant
+  void clear_no_resize()              { rep.clear_no_resize(); }
+  void swap(dense_hash_set& hs)       { rep.swap(hs.rep); }
+
+
+  // Functions concerning size
+  size_type size() const              { return rep.size(); }
+  size_type max_size() const          { return rep.max_size(); }
+  bool empty() const                  { return rep.empty(); }
+  size_type bucket_count() const      { return rep.bucket_count(); }
+  size_type max_bucket_count() const  { return rep.max_bucket_count(); }
+
+  // These are tr1 methods.  bucket() is the bucket the key is or would be in.
+  size_type bucket_size(size_type i) const    { return rep.bucket_size(i); }
+  size_type bucket(const key_type& key) const { return rep.bucket(key); }
+  float load_factor() const {
+    return size() * 1.0f / bucket_count();
+  }
+  float max_load_factor() const {
+    float shrink, grow;
+    rep.get_resizing_parameters(&shrink, &grow);
+    return grow;
+  }
+  void max_load_factor(float new_grow) {
+    float shrink, grow;
+    rep.get_resizing_parameters(&shrink, &grow);
+    rep.set_resizing_parameters(shrink, new_grow);
+  }
+  // These aren't tr1 methods but perhaps ought to be.
+  float min_load_factor() const {
+    float shrink, grow;
+    rep.get_resizing_parameters(&shrink, &grow);
+    return shrink;
+  }
+  void min_load_factor(float new_shrink) {
+    float shrink, grow;
+    rep.get_resizing_parameters(&shrink, &grow);
+    rep.set_resizing_parameters(new_shrink, grow);
+  }
+  // Deprecated; use min_load_factor() or max_load_factor() instead.
+  void set_resizing_parameters(float shrink, float grow) {
+    return rep.set_resizing_parameters(shrink, grow);
+  }
+
+  void resize(size_type hint)         { rep.resize(hint); }
+  void rehash(size_type hint)         { resize(hint); }     // the tr1 name
+
+  // Lookup routines
+  iterator find(const key_type& key) const           { return rep.find(key); }
+
+  size_type count(const key_type& key) const         { return rep.count(key); }
+
+  pair<iterator, iterator> equal_range(const key_type& key) const {
+    return rep.equal_range(key);
+  }
+
+  // Insertion routines
+  pair<iterator, bool> insert(const value_type& obj) {
+    pair<typename ht::iterator, bool> p = rep.insert(obj);
+    return pair<iterator, bool>(p.first, p.second);   // const to non-const
+  }
+  template <class InputIterator>
+  void insert(InputIterator f, InputIterator l)      { rep.insert(f, l); }
+  void insert(const_iterator f, const_iterator l)    { rep.insert(f, l); }
+  // required for std::insert_iterator; the passed-in iterator is ignored
+  iterator insert(iterator, const value_type& obj)   { return insert(obj).first; }
+
+
+  // Deletion and empty routines
+  // THESE ARE NON-STANDARD!  I make you specify an "impossible" key
+  // value to identify deleted and empty buckets.  You can change the
+  // deleted key as time goes on, or get rid of it entirely to be insert-only.
+  void set_empty_key(const key_type& key)     { rep.set_empty_key(key); }
+  void set_deleted_key(const key_type& key)   { rep.set_deleted_key(key); }
+  void clear_deleted_key()                    { rep.clear_deleted_key(); }
+
+  // These are standard
+  size_type erase(const key_type& key)               { return rep.erase(key); }
+  void erase(iterator it)                            { rep.erase(it); }
+  void erase(iterator f, iterator l)                 { rep.erase(f, l); }
+
+
+  // Comparison
+  bool operator==(const dense_hash_set& hs) const    { return rep == hs.rep; }
+  bool operator!=(const dense_hash_set& hs) const    { return rep != hs.rep; }
+
+
+  // I/O -- this is an add-on for writing metainformation to disk
+  bool write_metadata(FILE *fp)       { return rep.write_metadata(fp); }
+  bool read_metadata(FILE *fp)        { return rep.read_metadata(fp); }
+  bool write_nopointer_data(FILE *fp) { return rep.write_nopointer_data(fp); }
+  bool read_nopointer_data(FILE *fp)  { return rep.read_nopointer_data(fp); }
+};
+
+template <class Val, class HashFcn, class EqualKey, class Alloc>
+inline void swap(dense_hash_set<Val, HashFcn, EqualKey, Alloc>& hs1,
+                 dense_hash_set<Val, HashFcn, EqualKey, Alloc>& hs2) {
+  hs1.swap(hs2);
+}
+
+_END_GOOGLE_NAMESPACE_
+
+#endif /* _DENSE_HASH_SET_H_ */

data/ext/google/sparse_hash_map

@@ -0,0 +1,294 @@
+// Copyright (c) 2005, Google Inc.
+// All rights reserved.
+// 
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are
+// met:
+// 
+//     * Redistributions of source code must retain the above copyright
+// notice, this list of conditions and the following disclaimer.
+//     * Redistributions in binary form must reproduce the above
+// copyright notice, this list of conditions and the following disclaimer
+// in the documentation and/or other materials provided with the
+// distribution.
+//     * Neither the name of Google Inc. nor the names of its
+// contributors may be used to endorse or promote products derived from
+// this software without specific prior written permission.
+// 
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+// ---
+// Author: Craig Silverstein
+//
+// This is just a very thin wrapper over sparsehashtable.h, just
+// like sgi stl's stl_hash_map is a very thin wrapper over
+// stl_hashtable.  The major thing we define is operator[], because
+// we have a concept of a data_type which stl_hashtable doesn't
+// (it only has a key and a value).
+//
+// We adhere mostly to the STL semantics for hash-map.  One important
+// exception is that insert() invalidates iterators entirely.  On the
+// plus side, though, delete() doesn't invalidate iterators at all, or
+// even change the ordering of elements.
+//
+// Here are a few "power user" tips:
+//
+//    1) set_deleted_key():
+//         Unlike STL's hash_map, if you want to use erase() you
+//         *must* call set_deleted_key() after construction.
+//
+//    2) resize(0):
+//         When an item is deleted, its memory isn't freed right
+//         away.  This is what allows you to iterate over a hashtable
+//         and call erase() without invalidating the iterator.
+//         To force the memory to be freed, call resize(0).
+//         For tr1 compatibility, this can also be called as rehash(0).
+//
+//    3) min_load_factor(0.0)
+//         Setting the minimum load factor to 0.0 guarantees that
+//         the hash table will never shrink.
+//
+// Guide to what kind of hash_map to use:
+//   (1) dense_hash_map: fastest, uses the most memory
+//   (2) sparse_hash_map: slowest, uses the least memory
+//   (3) hash_map / unordered_map (STL): in the middle
+// Typically I use sparse_hash_map when I care about space and/or when
+// I need to save the hashtable on disk.  I use hash_map otherwise.  I
+// don't personally use dense_hash_map ever; some people use it for
+// small maps with lots of lookups.
+//
+// - dense_hash_map has, typically, a factor of 2 memory overhead (if your
+//   data takes up X bytes, the hash_map uses X more bytes in overhead).
+// - sparse_hash_map has about 2 bits overhead per entry.
+// - sparse_hash_map can be 3-7 times slower than the others for lookup and,
+//   especially, inserts.  See time_hash_map.cc for details.
+//
+// See /usr/(local/)?doc/sparsehash-*/sparse_hash_map.html
+// for information about how to use this class.
+
+#ifndef _SPARSE_HASH_MAP_H_
+#define _SPARSE_HASH_MAP_H_
+
+#include <google/sparsehash/sparseconfig.h>
+#include <stdio.h>                   // for FILE * in read()/write()
+#include <algorithm>                 // for the default template args
+#include <functional>                // for equal_to
+#include <memory>                    // for alloc<>
+#include <utility>                   // for pair<>
+#include HASH_FUN_H                  // defined in config.h
+#include <google/sparsehash/sparsehashtable.h>
+
+
+_START_GOOGLE_NAMESPACE_
+
+using STL_NAMESPACE::pair;
+
+template <class Key, class T,
+          class HashFcn = SPARSEHASH_HASH<Key>,   // defined in sparseconfig.h
+          class EqualKey = STL_NAMESPACE::equal_to<Key>,
+          class Alloc = STL_NAMESPACE::allocator<T> >
+class sparse_hash_map {
+ private:
+  // Apparently select1st is not stl-standard, so we define our own
+  struct SelectKey {
+    const Key& operator()(const pair<const Key, T>& p) const {
+      return p.first;
+    }
+  };
+  struct SetKey {
+    void operator()(pair<const Key, T>* value, const Key& new_key) const {
+      *const_cast<Key*>(&value->first) = new_key;
+      // It would be nice to clear the rest of value here as well, in
+      // case it's taking up a lot of memory.  We do this by clearing
+      // the value.  This assumes T has a zero-arg constructor!
+      value->second = T();
+    }
+  };
+
+  // The actual data
+  typedef sparse_hashtable<pair<const Key, T>, Key, HashFcn,
+                           SelectKey, SetKey, EqualKey, Alloc> ht;
+  ht rep;
+
+ public:
+  typedef typename ht::key_type key_type;
+  typedef T data_type;
+  typedef T mapped_type;
+  typedef typename ht::value_type value_type;
+  typedef typename ht::hasher hasher;
+  typedef typename ht::key_equal key_equal;
+  typedef Alloc allocator_type;
+
+  typedef typename ht::size_type size_type;
+  typedef typename ht::difference_type difference_type;
+  typedef typename ht::pointer pointer;
+  typedef typename ht::const_pointer const_pointer;
+  typedef typename ht::reference reference;
+  typedef typename ht::const_reference const_reference;
+
+  typedef typename ht::iterator iterator;
+  typedef typename ht::const_iterator const_iterator;
+  typedef typename ht::local_iterator local_iterator;
+  typedef typename ht::const_local_iterator const_local_iterator;
+
+  // Iterator functions
+  iterator begin()                               { return rep.begin(); }
+  iterator end()                                 { return rep.end(); }
+  const_iterator begin() const                   { return rep.begin(); }
+  const_iterator end() const                     { return rep.end(); }
+
+  // These come from tr1's unordered_map. For us, a bucket has 0 or 1 elements.
+  local_iterator begin(size_type i)              { return rep.begin(i); }
+  local_iterator end(size_type i)                { return rep.end(i); }
+  const_local_iterator begin(size_type i) const  { return rep.begin(i); }
+  const_local_iterator end(size_type i) const    { return rep.end(i); }
+
+  // Accessor functions
+  // TODO(csilvers): implement Alloc get_allocator() const;
+  hasher hash_funct() const                      { return rep.hash_funct(); }
+  hasher hash_function() const                   { return hash_funct(); }
+  key_equal key_eq() const                       { return rep.key_eq(); }
+
+
+  // Constructors
+  explicit sparse_hash_map(size_type expected_max_items_in_table = 0,
+                           const hasher& hf = hasher(),
+                           const key_equal& eql = key_equal())
+    : rep(expected_max_items_in_table, hf, eql) { }
+
+  template <class InputIterator>
+  sparse_hash_map(InputIterator f, InputIterator l,
+                  size_type expected_max_items_in_table = 0,
+                  const hasher& hf = hasher(),
+                  const key_equal& eql = key_equal())
+    : rep(expected_max_items_in_table, hf, eql) {
+    rep.insert(f, l);
+  }
+  // We use the default copy constructor
+  // We use the default operator=()
+  // We use the default destructor
+
+  void clear()                        { rep.clear(); }
+  void swap(sparse_hash_map& hs)      { rep.swap(hs.rep); }
+
+
+  // Functions concerning size
+  size_type size() const              { return rep.size(); }
+  size_type max_size() const          { return rep.max_size(); }
+  bool empty() const                  { return rep.empty(); }
+  size_type bucket_count() const      { return rep.bucket_count(); }
+  size_type max_bucket_count() const  { return rep.max_bucket_count(); }
+
+  // These are tr1 methods.  bucket() is the bucket the key is or would be in.
+  size_type bucket_size(size_type i) const    { return rep.bucket_size(i); }
+  size_type bucket(const key_type& key) const { return rep.bucket(key); }
+  float load_factor() const {
+    return size() * 1.0f / bucket_count();
+  }
+  float max_load_factor() const {
+    float shrink, grow;
+    rep.get_resizing_parameters(&shrink, &grow);
+    return grow;
+  }
+  void max_load_factor(float new_grow) {
+    float shrink, grow;
+    rep.get_resizing_parameters(&shrink, &grow);
+    rep.set_resizing_parameters(shrink, new_grow);
+  }
+  // These aren't tr1 methods but perhaps ought to be.
+  float min_load_factor() const {
+    float shrink, grow;
+    rep.get_resizing_parameters(&shrink, &grow);
+    return shrink;
+  }
+  void min_load_factor(float new_shrink) {
+    float shrink, grow;
+    rep.get_resizing_parameters(&shrink, &grow);
+    rep.set_resizing_parameters(new_shrink, grow);
+  }
+  // Deprecated; use min_load_factor() or max_load_factor() instead.
+  void set_resizing_parameters(float shrink, float grow) {
+    return rep.set_resizing_parameters(shrink, grow);
+  }
+
+  void resize(size_type hint)         { rep.resize(hint); }
+  void rehash(size_type hint)         { resize(hint); }      // the tr1 name
+
+  // Lookup routines
+  iterator find(const key_type& key)                 { return rep.find(key); }
+  const_iterator find(const key_type& key) const     { return rep.find(key); }
+
+  data_type& operator[](const key_type& key) {       // This is our value-add!
+    iterator it = find(key);
+    if (it != end()) {
+      return it->second;
+    } else {
+      return insert(value_type(key, data_type())).first->second;
+    }
+  }
+
+  size_type count(const key_type& key) const         { return rep.count(key); }
+
+  pair<iterator, iterator> equal_range(const key_type& key) {
+    return rep.equal_range(key);
+  }
+  pair<const_iterator, const_iterator> equal_range(const key_type& key) const {
+    return rep.equal_range(key);
+  }
+
+  // Insertion routines
+  pair<iterator, bool> insert(const value_type& obj) { return rep.insert(obj); }
+  template <class InputIterator>
+  void insert(InputIterator f, InputIterator l)      { rep.insert(f, l); }
+  void insert(const_iterator f, const_iterator l)    { rep.insert(f, l); }
+  // required for std::insert_iterator; the passed-in iterator is ignored
+  iterator insert(iterator, const value_type& obj)   { return insert(obj).first; }
+
+
+  // Deletion routines
+  // THESE ARE NON-STANDARD!  I make you specify an "impossible" key
+  // value to identify deleted buckets.  You can change the key as
+  // time goes on, or get rid of it entirely to be insert-only.
+  void set_deleted_key(const key_type& key)   {
+    rep.set_deleted_key(key);
+  }
+  void clear_deleted_key()                    { rep.clear_deleted_key(); }
+
+  // These are standard
+  size_type erase(const key_type& key)               { return rep.erase(key); }
+  void erase(iterator it)                            { rep.erase(it); }
+  void erase(iterator f, iterator l)                 { rep.erase(f, l); }
+
+
+  // Comparison
+  bool operator==(const sparse_hash_map& hs) const   { return rep == hs.rep; }
+  bool operator!=(const sparse_hash_map& hs) const   { return rep != hs.rep; }
+
+
+  // I/O -- this is an add-on for writing metainformation to disk
+  bool write_metadata(FILE *fp)       { return rep.write_metadata(fp); }
+  bool read_metadata(FILE *fp)        { return rep.read_metadata(fp); }
+  bool write_nopointer_data(FILE *fp) { return rep.write_nopointer_data(fp); }
+  bool read_nopointer_data(FILE *fp)  { return rep.read_nopointer_data(fp); }
+};
+
+// We need a global swap as well
+template <class Key, class T, class HashFcn, class EqualKey, class Alloc>
+inline void swap(sparse_hash_map<Key, T, HashFcn, EqualKey, Alloc>& hm1,
+                 sparse_hash_map<Key, T, HashFcn, EqualKey, Alloc>& hm2) {
+  hm1.swap(hm2);
+}
+
+_END_GOOGLE_NAMESPACE_
+
+#endif /* _SPARSE_HASH_MAP_H_ */