openstudio-standards 0.2.10 → 0.2.11.rc1

data/lib/openstudio-standards/standards/ashrae_90_1/nrel_zne_ready_2017/nrel_zne_ready_2017.AirTerminalSingleDuctVAVReheat.rb

@@ -6,7 +6,7 @@ class NRELZNEReady2017 < ASHRAE901
   # otherwise the minimum is 30%.
   #
   # @param has_ddc [Bool] whether or not there is DDC control of the VAV terminal in question
-  def air_terminal_single_duct_vav_reheat_minimum_damper_position(air_terminal_single_duct_vav_reheat, has_ddc = false)
+  def air_terminal_single_duct_vav_reheat_minimum_damper_position(air_terminal_single_duct_vav_reheat, has_ddc = true)
     min_damper_position = nil
     case air_terminal_single_duct_vav_reheat_reheat_type(air_terminal_single_duct_vav_reheat)
     when 'HotWater'

data/lib/openstudio-standards/standards/ashrae_90_1/nrel_zne_ready_2017/nrel_zne_ready_2017.HeatExchangerSensLat.rb

@@ -1,15 +1,34 @@
 class NRELZNEReady2017 < ASHRAE901
   # @!group HeatExchangerSensLat
 
-  # Defines the minimum sensible and latent effectiveness of
-  # the heat exchanger.  Assumed to apply to sensible and latent
-  # effectiveness at all flow rates.  For NREL ZNE Ready 2017, assume
-  # 72% effectiveness, as this is higher than the typical 90.1 minimum of 50%,
-  # and is easily achievable with an enthalpy wheel.
-  #
-  # @param heat_exchanger_air_to_air_sensible_and_latent [OpenStudio::Model::HeatExchangerAirToAirSensibleAndLatent] the heat exchanger
-  def heat_exchanger_air_to_air_sensible_and_latent_minimum_efficiency(heat_exchanger_air_to_air_sensible_and_latent)
-    min_effct = 0.72
-    return min_effct
+  # Sets the minimum effectiveness of the heat exchanger
+  def heat_exchanger_air_to_air_sensible_and_latent_apply_efficiency(heat_exchanger_air_to_air_sensible_and_latent)
+    # Assumed to be sensible and latent at all flow
+    heat_exchanger_type = heat_exchanger_air_to_air_sensible_and_latent.heatExchangerType
+
+    if heat_exchanger_type == 'Plate'
+      heat_exchanger_air_to_air_sensible_and_latent.setSensibleEffectivenessat100HeatingAirFlow(0.755)
+      heat_exchanger_air_to_air_sensible_and_latent.setLatentEffectivenessat100HeatingAirFlow(0.564)
+      heat_exchanger_air_to_air_sensible_and_latent.setSensibleEffectivenessat75HeatingAirFlow(0.791)
+      heat_exchanger_air_to_air_sensible_and_latent.setLatentEffectivenessat75HeatingAirFlow(0.625)
+      heat_exchanger_air_to_air_sensible_and_latent.setSensibleEffectivenessat100CoolingAirFlow(0.755)
+      heat_exchanger_air_to_air_sensible_and_latent.setLatentEffectivenessat100CoolingAirFlow(0.564)
+      heat_exchanger_air_to_air_sensible_and_latent.setSensibleEffectivenessat75CoolingAirFlow(0.791)
+      heat_exchanger_air_to_air_sensible_and_latent.setLatentEffectivenessat75CoolingAirFlow(0.625)
+      heat_exchanger_air_to_air_sensible_and_latent.setNominalElectricPower(0.0)
+    else # Rotary
+      heat_exchanger_air_to_air_sensible_and_latent.setSensibleEffectivenessat100HeatingAirFlow(0.75)
+      heat_exchanger_air_to_air_sensible_and_latent.setLatentEffectivenessat100HeatingAirFlow(0.74)
+      heat_exchanger_air_to_air_sensible_and_latent.setSensibleEffectivenessat75HeatingAirFlow(0.79)
+      heat_exchanger_air_to_air_sensible_and_latent.setLatentEffectivenessat75HeatingAirFlow(0.79)
+      heat_exchanger_air_to_air_sensible_and_latent.setSensibleEffectivenessat100CoolingAirFlow(0.75)
+      heat_exchanger_air_to_air_sensible_and_latent.setLatentEffectivenessat100CoolingAirFlow(0.74)
+      heat_exchanger_air_to_air_sensible_and_latent.setSensibleEffectivenessat75CoolingAirFlow(0.78)
+      heat_exchanger_air_to_air_sensible_and_latent.setLatentEffectivenessat75CoolingAirFlow(0.78)
+    end
+
+    OpenStudio.logFree(OpenStudio::Info, 'openstudio.ze_aedg_multifamily.HeatExchangerAirToAirSensibleAndLatent', "For #{heat_exchanger_air_to_air_sensible_and_latent.name}, set sensible and latent effectiveness to #{heat_exchanger_type} values.")
+
+    return true
   end
 end

data/lib/openstudio-standards/standards/ashrae_90_1/nrel_zne_ready_2017/nrel_zne_ready_2017.Model.rb

@@ -9,7 +9,7 @@ class NRELZNEReady2017 < ASHRAE901
 
     # Air Loop Controls
     if apply_controls.nil? || apply_controls == true
-      model.getAirLoopHVACs.sort.each { |obj| air_loop_hvac_apply_standard_controls(obj, climate_zone) }
+      model.getAirLoopHVACs.sort.each { |obj| air_loop_hvac_apply_standard_controls(obj, climate_zone) unless air_loop_hvac_unitary_system?(obj) }
     end
 
     # Plant Loop Controls
@@ -24,18 +24,18 @@ class NRELZNEReady2017 < ASHRAE901
     model.getFanConstantVolumes.sort.each { |obj| fan_apply_standard_minimum_motor_efficiency(obj, fan_brake_horsepower(obj)) }
     model.getFanOnOffs.sort.each { |obj| fan_apply_standard_minimum_motor_efficiency(obj, fan_brake_horsepower(obj)) }
     model.getFanZoneExhausts.sort.each { |obj| fan_apply_standard_minimum_motor_efficiency(obj, fan_brake_horsepower(obj)) }
-    model.getZoneHVACComponents.sort.each { |obj| zone_hvac_component_apply_standard_fan_power(obj) }
+    model.getZoneHVACComponents.sort.each { |obj| zone_hvac_component_apply_prm_baseline_fan_power(obj) }
 
     # Pumps
     model.getPumpConstantSpeeds.sort.each { |obj| pump_apply_standard_minimum_motor_efficiency(obj) }
     model.getPumpVariableSpeeds.sort.each { |obj| pump_apply_standard_minimum_motor_efficiency(obj) }
     model.getHeaderedPumpsConstantSpeeds.sort.each { |obj| pump_apply_standard_minimum_motor_efficiency(obj) }
     model.getHeaderedPumpsVariableSpeeds.sort.each { |obj| pump_apply_standard_minimum_motor_efficiency(obj) }
-    model.getPlantLoops.sort.each { |obj| plant_loop_apply_standard_pump_power(obj) }
+    model.getPlantLoops.sort.each { |obj| plant_loop_apply_prm_baseline_pumping_type(obj) unless plant_loop_swh_loop?(obj) }
 
     # Unitary HPs
     # set DX HP coils before DX clg coils because when DX HP coils need to first
-    # pull the capacities of their paried DX clg coils, and this does not work
+    # pull the capacities of their paired DX clg coils, and this does not work
     # correctly if the DX clg coil efficiencies have been set because they are renamed.
     model.getCoilHeatingDXSingleSpeeds.sort.each { |obj| sql_db_vars_map = coil_heating_dx_single_speed_apply_efficiency_and_curves(obj, sql_db_vars_map) }
 

data/lib/openstudio-standards/standards/ashrae_90_1/nrel_zne_ready_2017/nrel_zne_ready_2017.PlantLoop.rb

@@ -1,96 +1,68 @@
 class NRELZNEReady2017 < ASHRAE901
   # @!group PlantLoop
 
-  # But actually it's completely irrelevant... you could set at 0.9 and just calculate the pressurise rise to have your 19 W/GPM or whatever
-  def plant_loop_apply_standard_pump_power(plant_loop)
-    # Determine the pumping power per
-    # flow based on loop type.
-    pri_w_per_gpm = nil
-    sec_w_per_gpm = nil
+  # Applies the chilled water pumping controls to the loop
+  def plant_loop_apply_prm_baseline_chilled_water_pumping_type(plant_loop)
+    pri_control_type = 'VSD DP Reset'
+    sec_control_type = 'VSD DP Reset'
+    has_secondary_pump = false
 
-    sizing_plant = plant_loop.sizingPlant
-    loop_type = sizing_plant.loopType
-
-    case loop_type
-    when 'Heating'
-
-      has_district_heating = false
-      plant_loop.supplyComponents.each do |sc|
-        if sc.to_DistrictHeating.is_initialized
-          has_district_heating = true
-        end
+    # Modify all the secondary pumps
+    plant_loop.demandComponents.each do |sc|
+      if sc.to_PumpVariableSpeed.is_initialized
+        pump = sc.to_PumpVariableSpeed.get
+        pump_variable_speed_set_control_type(pump, sec_control_type)
+        has_secondary_pump = true
+      elsif sc.to_HeaderedPumpsVariableSpeed.is_initialized
+        pump = sc.to_HeaderedPumpsVariableSpeed.get
+        headered_pump_variable_speed_set_control_type(pump, control_type)
+        has_secondary_pump = true
       end
+    end
 
-      pri_w_per_gpm = if has_district_heating # District HW
-                        14.0
-                      else # HW
-                        19.0
-                      end
+    # Primary is constant flow if primary/secondary setup
+    pri_control_type = 'Constant Flow' if has_secondary_pump
 
-    when 'Cooling'
-      has_district_cooling = false
-      plant_loop.supplyComponents.each do |sc|
-        if sc.to_DistrictCooling.is_initialized
-          has_district_cooling = true
-        end
+    # Modify all the primary pumps
+    plant_loop.supplyComponents.each do |sc|
+      if sc.to_PumpVariableSpeed.is_initialized
+        pump = sc.to_PumpVariableSpeed.get
+        pump_variable_speed_set_control_type(pump, pri_control_type)
+      elsif sc.to_HeaderedPumpsVariableSpeed.is_initialized
+        pump = sc.to_HeaderedPumpsVariableSpeed.get
+        headered_pump_variable_speed_set_control_type(pump, control_type)
       end
+    end
 
-      has_secondary_pump = false
-      plant_loop.demandComponents.each do |sc|
-        if sc.to_PumpConstantSpeed.is_initialized || sc.to_PumpVariableSpeed.is_initialized
-          has_secondary_pump = true
-        end
-      end
+    # Report out the pumping type
+    unless pri_control_type.nil?
+      OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.AirLoopHVAC', "For #{plant_loop.name}, primary pump type is #{pri_control_type}.")
+    end
 
-      if has_district_cooling # District CHW
-        pri_w_per_gpm = 16.0
-      elsif has_secondary_pump # Primary/secondary CHW
-        pri_w_per_gpm = 9.0
-        sec_w_per_gpm = 13.0
-      else # Primary only CHW
-        pri_w_per_gpm = 22.0
-      end
+    if has_secondary_pump
+      OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.AirLoopHVAC', "For #{plant_loop.name}, secondary pump type is #{sec_control_type}.")
+    end
 
-    when 'Condenser'
-      pri_w_per_gpm = 19.0
+    return true
+  end
 
-    end
+  # Applies the hot water pumping controls to the loop
+  def plant_loop_apply_prm_baseline_hot_water_pumping_type(plant_loop)
+    control_type = 'VSD DP Reset'
 
     # Modify all the primary pumps
     plant_loop.supplyComponents.each do |sc|
-      if sc.to_PumpConstantSpeed.is_initialized
-        pump = sc.to_PumpConstantSpeed.get
-        pump_apply_prm_pressure_rise_and_motor_efficiency(pump, pri_w_per_gpm)
-      elsif sc.to_PumpVariableSpeed.is_initialized
+      if sc.to_PumpVariableSpeed.is_initialized
         pump = sc.to_PumpVariableSpeed.get
-        pump_apply_prm_pressure_rise_and_motor_efficiency(pump, pri_w_per_gpm)
-      elsif sc.to_HeaderedPumpsConstantSpeed.is_initialized
-        pump = sc.to_HeaderedPumpsConstantSpeed.get
-        pump_apply_prm_pressure_rise_and_motor_efficiency(pump, pri_w_per_gpm)
-      elsif sc.to_HeaderedPumpsVariableSpeed.is_initialized
-        pump = sc.to_HeaderedPumpsVariableSpeed.get
-        pump_apply_prm_pressure_rise_and_motor_efficiency(pump, pri_w_per_gpm)
+        pump_variable_speed_set_control_type(pump, control_type)
       end
     end
 
-    # Modify all the secondary pumps
-    plant_loop.demandComponents.each do |sc|
-      if sc.to_PumpConstantSpeed.is_initialized
-        pump = sc.to_PumpConstantSpeed.get
-        pump_apply_prm_pressure_rise_and_motor_efficiency(pump, sec_w_per_gpm)
-      elsif sc.to_PumpVariableSpeed.is_initialized
-        pump = sc.to_PumpVariableSpeed.get
-        pump_apply_prm_pressure_rise_and_motor_efficiency(pump, sec_w_per_gpm)
-      elsif sc.to_HeaderedPumpsConstantSpeed.is_initialized
-        pump = sc.to_HeaderedPumpsConstantSpeed.get
-        pump_apply_prm_pressure_rise_and_motor_efficiency(pump, pri_w_per_gpm)
-      elsif sc.to_HeaderedPumpsVariableSpeed.is_initialized
-        pump = sc.to_HeaderedPumpsVariableSpeed.get
-        pump_apply_prm_pressure_rise_and_motor_efficiency(pump, pri_w_per_gpm)
-      end
+    # Report out the pumping type
+    unless control_type.nil?
+      OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.PlantLoop', "For #{plant_loop.name}, pump type is #{control_type}.")
     end
 
     return true
   end
-
-end
+end

data/lib/openstudio-standards/standards/ashrae_90_1/nrel_zne_ready_2017/nrel_zne_ready_2017.ZoneHVACComponent.rb

@@ -1,76 +1,8 @@
 class NRELZNEReady2017 < ASHRAE901
   # @!group ZoneHVACComponent
 
-  # Sets the fan power of zone level HVAC equipment
-  # (PTACs, PTHPs, Fan Coils, and Unit Heaters)
-  # based on the W/cfm specified in the standard.
-  #
-  # @return [Bool] returns true if successful, false if not
-  def zone_hvac_component_apply_standard_fan_power(zone_hvac_component)
-    OpenStudio.logFree(OpenStudio::Debug, 'openstudio.model.ZoneHVACComponent', "Setting fan power for #{zone_hvac_component.name}.")
-
-    # Convert this to the actual class type
-    zone_hvac = if zone_hvac_component.to_ZoneHVACFourPipeFanCoil.is_initialized
-                  zone_hvac_component.to_ZoneHVACFourPipeFanCoil.get
-                elsif zone_hvac_component.to_ZoneHVACUnitHeater.is_initialized
-                  zone_hvac_component.to_ZoneHVACUnitHeater.get
-                elsif zone_hvac_component.to_ZoneHVACPackagedTerminalAirConditioner.is_initialized
-                  zone_hvac_component.to_ZoneHVACPackagedTerminalAirConditioner.get
-                elsif zone_hvac_component.to_ZoneHVACPackagedTerminalHeatPump.is_initialized
-                  zone_hvac_component.to_ZoneHVACPackagedTerminalHeatPump.get
-                elsif zone_hvac_component.to_ZoneHVACTerminalUnitVariableRefrigerantFlow.is_initialized
-                  zone_hvac_component.to_ZoneHVACTerminalUnitVariableRefrigerantFlow.get
-                elsif zone_hvac_component.to_ZoneHVACWaterToAirHeatPump.is_initialized
-                  zone_hvac_component.to_ZoneHVACWaterToAirHeatPump.get
-                end
-
-    # Do nothing for other types of zone HVAC equipment
-    if zone_hvac.nil?
-      return false
-    end
-
-    # Determine the W/cfm
-    fan_efficacy_w_per_cfm = 0.38
-
-    # Convert efficacy to metric
-    fan_efficacy_w_per_m3_per_s = fan_efficacy_w_per_cfm / OpenStudio.convert(1.0, 'ft^3/min', 'm^3/s').get
-
-    # Get the fan
-    fan = if zone_hvac.supplyAirFan.to_FanConstantVolume.is_initialized
-            zone_hvac.supplyAirFan.to_FanConstantVolume.get
-          elsif zone_hvac.supplyAirFan.to_FanVariableVolume.is_initialized
-            zone_hvac.supplyAirFan.to_FanVariableVolume.get
-          elsif zone_hvac.supplyAirFan.to_FanOnOff.is_initialized
-            zone_hvac.supplyAirFan.to_FanOnOff.get
-          end
-
-    # Get the maximum flow rate through the fan
-    max_air_flow_rate = nil
-    if fan.autosizedMaximumFlowRate.is_initialized
-      max_air_flow_rate = fan.autosizedMaximumFlowRate.get
-    elsif fan.maximumFlowRate.is_initialized
-      max_air_flow_rate = fan.maximumFlowRate.get
-    end
-    max_air_flow_rate_cfm = OpenStudio.convert(max_air_flow_rate, 'm^3/s', 'ft^3/min').get
-
-    # Set the impeller efficiency
-    fan_change_impeller_efficiency(fan, fan_baseline_impeller_efficiency(fan))
-
-    # Set the motor efficiency, preserving the impeller efficiency.
-    # For zone HVAC fans, a bhp lookup of 0.5bhp is always used because
-    # they are assumed to represent a series of small fans in reality.
-    fan_apply_standard_minimum_motor_efficiency(fan, fan_brake_horsepower(fan))
-
-    # Calculate a new pressure rise to hit the target W/cfm
-    fan_tot_eff = fan.fanEfficiency
-    fan_rise_new_pa = fan_efficacy_w_per_m3_per_s * fan_tot_eff
-    fan.setPressureRise(fan_rise_new_pa)
-
-    # Calculate the newly set efficacy
-    fan_power_new_w = fan_rise_new_pa * max_air_flow_rate / fan_tot_eff
-    fan_efficacy_new_w_per_cfm = fan_power_new_w / max_air_flow_rate_cfm
-    OpenStudio.logFree(OpenStudio::Info, 'openstudio.model.ZoneHVACComponent', "For #{zone_hvac_component.name}: fan efficacy set to #{fan_efficacy_new_w_per_cfm.round(2)} W/cfm.")
-
-    return true
+  def zone_hvac_component_prm_baseline_fan_efficacy
+    fan_efficacy_w_per_cfm = 0.65
+    return fan_efficacy_w_per_cfm
   end
-end
+end

data/lib/openstudio-standards/standards/ashrae_90_1/ze_aedg_multifamily/data/ze_aedg_multifamily.boilers.json

@@ -0,0 +1,20 @@
+{
+  "boilers": [
+    {
+      "template": "ZE AEDG Multifamily",
+      "fluid_type": "Hot Water",
+      "fuel_type": "Gas",
+      "condensing": null,
+      "condensing_control": null,
+      "minimum_capacity": 0.0,
+      "maximum_capacity": 9999999999.0,
+      "start_date": "1919-09-09T00:00:00+00:00",
+      "end_date": "2999-09-09T00:00:00+00:00",
+      "minimum_annual_fuel_utilization_efficiency": null,
+      "minimum_thermal_efficiency": null,
+      "minimum_combustion_efficiency": 0.94,
+      "efffplr": "Boiler with Minimum Turndown",
+      "notes": "Assumes a condensing boiler"
+    }
+  ]
+}

data/lib/openstudio-standards/standards/ashrae_90_1/ze_aedg_multifamily/data/ze_aedg_multifamily.chillers.json

@@ -0,0 +1,400 @@
+{
+  "chillers": [
+    {
+      "template": "ZE AEDG Multifamily",
+      "cooling_type": "AirCooled",
+      "condenser_type": null,
+      "compressor_type": "Rotary Screw",
+      "absorption_type": null,
+      "variable_speed_drive": null,
+      "minimum_capacity": 0.0,
+      "maximum_capacity": 149.99,
+      "start_date": "1919-09-09T00:00:00+00:00",
+      "end_date": "2999-09-09T00:00:00+00:00",
+      "minimum_full_load_efficiency": 1.0695,
+      "minimum_integrated_part_load_value": 0.77922,
+      "capft": "AirCooled_Chiller_2010_PathA_CAPFT",
+      "eirft": "AirCooled_Chiller_2010_PathA_EIRFT",
+      "eirfplr": "AirCooled_Chiller_AllCapacities_2004_2010_EIRFPLR",
+      "notes": "from ASHRAE 189.1-2017"
+    },
+    {
+      "template": "ZE AEDG Multifamily",
+      "cooling_type": "AirCooled",
+      "condenser_type": null,
+      "compressor_type": "Rotary Screw",
+      "absorption_type": null,
+      "variable_speed_drive": null,
+      "minimum_capacity": 140.0,
+      "maximum_capacity": 9999.0,
+      "start_date": "1919-09-09T00:00:00+00:00",
+      "end_date": "2999-09-09T00:00:00+00:00",
+      "minimum_full_load_efficiency": 1.0,
+      "minimum_integrated_part_load_value": 0.76433,
+      "capft": "AirCooled_Chiller_2010_PathA_CAPFT",
+      "eirft": "AirCooled_Chiller_2010_PathA_EIRFT",
+      "eirfplr": "AirCooled_Chiller_AllCapacities_2004_2010_EIRFPLR",
+      "notes": "from ASHRAE 189.1-2017"
+    },
+    {
+      "template": "ZE AEDG Multifamily",
+      "cooling_type": "WaterCooled",
+      "condenser_type": null,
+      "compressor_type": "Centrifugal",
+      "absorption_type": null,
+      "variable_speed_drive": null,
+      "minimum_capacity": 0.0,
+      "maximum_capacity": 149.99,
+      "start_date": "1919-09-09T00:00:00+00:00",
+      "end_date": "2999-09-09T00:00:00+00:00",
+      "minimum_full_load_efficiency": 0.61,
+      "minimum_integrated_part_load_value": 0.55,
+      "capft": "WaterCooled_Centrifugal_Chiller_2010_PathA_CAPFT",
+      "eirft": "WaterCooled_Centrifugal_Chiller_2010_PathA_EIRFT",
+      "eirfplr": "ChlrWtrCentPathAAllEIRRatio_fQRatio",
+      "notes": "From 90.1-2016 Table 6.8.1-3"
+    },
+    {
+      "template": "ZE AEDG Multifamily",
+      "cooling_type": "WaterCooled",
+      "condenser_type": null,
+      "compressor_type": "Centrifugal",
+      "absorption_type": null,
+      "variable_speed_drive": null,
+      "minimum_capacity": 150.0,
+      "maximum_capacity": 299.99,
+      "start_date": "1919-09-09T00:00:00+00:00",
+      "end_date": "2999-09-09T00:00:00+00:00",
+      "minimum_full_load_efficiency": 0.61,
+      "minimum_integrated_part_load_value": 0.55,
+      "capft": "WaterCooled_Centrifugal_Chiller_2010_PathA_CAPFT",
+      "eirft": "WaterCooled_Centrifugal_Chiller_2010_PathA_EIRFT",
+      "eirfplr": "ChlrWtrCentPathAAllEIRRatio_fQRatio",
+      "notes": "From 90.1-2016 Table 6.8.1-3"
+    },
+    {
+      "template": "ZE AEDG Multifamily",
+      "cooling_type": "WaterCooled",
+      "condenser_type": null,
+      "compressor_type": "Centrifugal",
+      "absorption_type": null,
+      "variable_speed_drive": null,
+      "minimum_capacity": 300.0,
+      "maximum_capacity": 399.99,
+      "start_date": "1919-09-09T00:00:00+00:00",
+      "end_date": "2999-09-09T00:00:00+00:00",
+      "minimum_full_load_efficiency": 0.56,
+      "minimum_integrated_part_load_value": 0.52,
+      "capft": "WaterCooled_Centrifugal_Chiller_2010_PathA_CAPFT",
+      "eirft": "WaterCooled_Centrifugal_Chiller_2010_PathA_EIRFT",
+      "eirfplr": "ChlrWtrCentPathAAllEIRRatio_fQRatio",
+      "notes": "From 90.1-2016 Table 6.8.1-3"
+    },
+    {
+      "template": "ZE AEDG Multifamily",
+      "cooling_type": "WaterCooled",
+      "condenser_type": null,
+      "compressor_type": "Centrifugal",
+      "absorption_type": null,
+      "variable_speed_drive": null,
+      "minimum_capacity": 400.0,
+      "maximum_capacity": 599.99,
+      "start_date": "1919-09-09T00:00:00+00:00",
+      "end_date": "2999-09-09T00:00:00+00:00",
+      "minimum_full_load_efficiency": 0.56,
+      "minimum_integrated_part_load_value": 0.5,
+      "capft": "WaterCooled_Centrifugal_Chiller_2010_PathA_CAPFT",
+      "eirft": "WaterCooled_Centrifugal_Chiller_2010_PathA_EIRFT",
+      "eirfplr": "ChlrWtrCentPathAAllEIRRatio_fQRatio",
+      "notes": "From 90.1-2016 Table 6.8.1-3"
+    },
+    {
+      "template": "ZE AEDG Multifamily",
+      "cooling_type": "WaterCooled",
+      "condenser_type": null,
+      "compressor_type": "Centrifugal",
+      "absorption_type": null,
+      "variable_speed_drive": null,
+      "minimum_capacity": 600.0,
+      "maximum_capacity": 9999.0,
+      "start_date": "1919-09-09T00:00:00+00:00",
+      "end_date": "2999-09-09T00:00:00+00:00",
+      "minimum_full_load_efficiency": 0.56,
+      "minimum_integrated_part_load_value": 0.5,
+      "capft": "WaterCooled_Centrifugal_Chiller_2010_PathA_CAPFT",
+      "eirft": "WaterCooled_Centrifugal_Chiller_2010_PathA_EIRFT",
+      "eirfplr": "ChlrWtrCentPathAAllEIRRatio_fQRatio",
+      "notes": "From 90.1-2016 Table 6.8.1-3"
+    },
+    {
+      "template": "ZE AEDG Multifamily",
+      "cooling_type": "WaterCooled",
+      "condenser_type": null,
+      "compressor_type": "Reciprocating",
+      "absorption_type": null,
+      "variable_speed_drive": null,
+      "minimum_capacity": 0.0,
+      "maximum_capacity": 149.99,
+      "start_date": "1919-09-09T00:00:00+00:00",
+      "end_date": "2999-09-09T00:00:00+00:00",
+      "minimum_full_load_efficiency": 0.75,
+      "minimum_integrated_part_load_value": 0.6,
+      "capft": "ChlrWtrPosDispPathAAllQRatio_fTchwsTcwsSI",
+      "eirft": "ChlrWtrPosDispPathAAllEIRRatio_fTchwsTcwsSI",
+      "eirfplr": "ChlrWtrPosDispPathAAllEIRRatio_fQRatio",
+      "notes": "From 90.1-2016 Table 6.8.1-3"
+    },
+    {
+      "template": "ZE AEDG Multifamily",
+      "cooling_type": "WaterCooled",
+      "condenser_type": null,
+      "compressor_type": "Reciprocating",
+      "absorption_type": null,
+      "variable_speed_drive": null,
+      "minimum_capacity": 150.0,
+      "maximum_capacity": 299.99,
+      "start_date": "1919-09-09T00:00:00+00:00",
+      "end_date": "2999-09-09T00:00:00+00:00",
+      "minimum_full_load_efficiency": 0.72,
+      "minimum_integrated_part_load_value": 0.56,
+      "capft": "ChlrWtrPosDispPathAAllQRatio_fTchwsTcwsSI",
+      "eirft": "ChlrWtrPosDispPathAAllEIRRatio_fTchwsTcwsSI",
+      "eirfplr": "ChlrWtrPosDispPathAAllEIRRatio_fQRatio",
+      "notes": "From 90.1-2016 Table 6.8.1-3"
+    },
+    {
+      "template": "ZE AEDG Multifamily",
+      "cooling_type": "WaterCooled",
+      "condenser_type": null,
+      "compressor_type": "Reciprocating",
+      "absorption_type": null,
+      "variable_speed_drive": null,
+      "minimum_capacity": 300.0,
+      "maximum_capacity": 399.99,
+      "start_date": "1919-09-09T00:00:00+00:00",
+      "end_date": "2999-09-09T00:00:00+00:00",
+      "minimum_full_load_efficiency": 0.66,
+      "minimum_integrated_part_load_value": 0.54,
+      "capft": "ChlrWtrPosDispPathAAllQRatio_fTchwsTcwsSI",
+      "eirft": "ChlrWtrPosDispPathAAllEIRRatio_fTchwsTcwsSI",
+      "eirfplr": "ChlrWtrPosDispPathAAllEIRRatio_fQRatio",
+      "notes": "From 90.1-2016 Table 6.8.1-3"
+    },
+    {
+      "template": "ZE AEDG Multifamily",
+      "cooling_type": "WaterCooled",
+      "condenser_type": null,
+      "compressor_type": "Reciprocating",
+      "absorption_type": null,
+      "variable_speed_drive": null,
+      "minimum_capacity": 400.0,
+      "maximum_capacity": 599.99,
+      "start_date": "1919-09-09T00:00:00+00:00",
+      "end_date": "2999-09-09T00:00:00+00:00",
+      "minimum_full_load_efficiency": 0.61,
+      "minimum_integrated_part_load_value": 0.52,
+      "capft": "ChlrWtrPosDispPathAAllQRatio_fTchwsTcwsSI",
+      "eirft": "ChlrWtrPosDispPathAAllEIRRatio_fTchwsTcwsSI",
+      "eirfplr": "ChlrWtrPosDispPathAAllEIRRatio_fQRatio",
+      "notes": "From 90.1-2016 Table 6.8.1-3"
+    },
+    {
+      "template": "ZE AEDG Multifamily",
+      "cooling_type": "WaterCooled",
+      "condenser_type": null,
+      "compressor_type": "Reciprocating",
+      "absorption_type": null,
+      "variable_speed_drive": null,
+      "minimum_capacity": 600.0,
+      "maximum_capacity": 9999.0,
+      "start_date": "1919-09-09T00:00:00+00:00",
+      "end_date": "2999-09-09T00:00:00+00:00",
+      "minimum_full_load_efficiency": 0.56,
+      "minimum_integrated_part_load_value": 0.5,
+      "capft": "ChlrWtrPosDispPathAAllQRatio_fTchwsTcwsSI",
+      "eirft": "ChlrWtrPosDispPathAAllEIRRatio_fTchwsTcwsSI",
+      "eirfplr": "ChlrWtrPosDispPathAAllEIRRatio_fQRatio",
+      "notes": "From 90.1-2016 Table 6.8.1-3"
+    },
+    {
+      "template": "ZE AEDG Multifamily",
+      "cooling_type": "WaterCooled",
+      "condenser_type": null,
+      "compressor_type": "Rotary Screw",
+      "absorption_type": null,
+      "variable_speed_drive": null,
+      "minimum_capacity": 0.0,
+      "maximum_capacity": 149.99,
+      "start_date": "1919-09-09T00:00:00+00:00",
+      "end_date": "2999-09-09T00:00:00+00:00",
+      "minimum_full_load_efficiency": 0.75,
+      "minimum_integrated_part_load_value": 0.6,
+      "capft": "ChlrWtrPosDispPathAAllQRatio_fTchwsTcwsSI",
+      "eirft": "ChlrWtrPosDispPathAAllEIRRatio_fTchwsTcwsSI",
+      "eirfplr": "ChlrWtrPosDispPathAAllEIRRatio_fQRatio",
+      "notes": "From 90.1-2016 Table 6.8.1-3"
+    },
+    {
+      "template": "ZE AEDG Multifamily",
+      "cooling_type": "WaterCooled",
+      "condenser_type": null,
+      "compressor_type": "Rotary Screw",
+      "absorption_type": null,
+      "variable_speed_drive": null,
+      "minimum_capacity": 150.0,
+      "maximum_capacity": 299.99,
+      "start_date": "1919-09-09T00:00:00+00:00",
+      "end_date": "2999-09-09T00:00:00+00:00",
+      "minimum_full_load_efficiency": 0.72,
+      "minimum_integrated_part_load_value": 0.56,
+      "capft": "ChlrWtrPosDispPathAAllQRatio_fTchwsTcwsSI",
+      "eirft": "ChlrWtrPosDispPathAAllEIRRatio_fTchwsTcwsSI",
+      "eirfplr": "ChlrWtrPosDispPathAAllEIRRatio_fQRatio",
+      "notes": "From 90.1-2016 Table 6.8.1-3"
+    },
+    {
+      "template": "ZE AEDG Multifamily",
+      "cooling_type": "WaterCooled",
+      "condenser_type": null,
+      "compressor_type": "Rotary Screw",
+      "absorption_type": null,
+      "variable_speed_drive": null,
+      "minimum_capacity": 300.0,
+      "maximum_capacity": 399.99,
+      "start_date": "1919-09-09T00:00:00+00:00",
+      "end_date": "2999-09-09T00:00:00+00:00",
+      "minimum_full_load_efficiency": 0.66,
+      "minimum_integrated_part_load_value": 0.54,
+      "capft": "ChlrWtrPosDispPathAAllQRatio_fTchwsTcwsSI",
+      "eirft": "ChlrWtrPosDispPathAAllEIRRatio_fTchwsTcwsSI",
+      "eirfplr": "ChlrWtrPosDispPathAAllEIRRatio_fQRatio",
+      "notes": "From 90.1-2016 Table 6.8.1-3"
+    },
+    {
+      "template": "ZE AEDG Multifamily",
+      "cooling_type": "WaterCooled",
+      "condenser_type": null,
+      "compressor_type": "Rotary Screw",
+      "absorption_type": null,
+      "variable_speed_drive": null,
+      "minimum_capacity": 400.0,
+      "maximum_capacity": 599.99,
+      "start_date": "1919-09-09T00:00:00+00:00",
+      "end_date": "2999-09-09T00:00:00+00:00",
+      "minimum_full_load_efficiency": 0.61,
+      "minimum_integrated_part_load_value": 0.52,
+      "capft": "ChlrWtrPosDispPathAAllQRatio_fTchwsTcwsSI",
+      "eirft": "ChlrWtrPosDispPathAAllEIRRatio_fTchwsTcwsSI",
+      "eirfplr": "ChlrWtrPosDispPathAAllEIRRatio_fQRatio",
+      "notes": "From 90.1-2016 Table 6.8.1-3"
+    },
+    {
+      "template": "ZE AEDG Multifamily",
+      "cooling_type": "WaterCooled",
+      "condenser_type": null,
+      "compressor_type": "Rotary Screw",
+      "absorption_type": null,
+      "variable_speed_drive": null,
+      "minimum_capacity": 600.0,
+      "maximum_capacity": 9999.0,
+      "start_date": "1919-09-09T00:00:00+00:00",
+      "end_date": "2999-09-09T00:00:00+00:00",
+      "minimum_full_load_efficiency": 0.56,
+      "minimum_integrated_part_load_value": 0.5,
+      "capft": "ChlrWtrPosDispPathAAllQRatio_fTchwsTcwsSI",
+      "eirft": "ChlrWtrPosDispPathAAllEIRRatio_fTchwsTcwsSI",
+      "eirfplr": "ChlrWtrPosDispPathAAllEIRRatio_fQRatio",
+      "notes": "From 90.1-2016 Table 6.8.1-3"
+    },
+    {
+      "template": "ZE AEDG Multifamily",
+      "cooling_type": "WaterCooled",
+      "condenser_type": null,
+      "compressor_type": "Scroll",
+      "absorption_type": null,
+      "variable_speed_drive": null,
+      "minimum_capacity": 0.0,
+      "maximum_capacity": 149.99,
+      "start_date": "1919-09-09T00:00:00+00:00",
+      "end_date": "2999-09-09T00:00:00+00:00",
+      "minimum_full_load_efficiency": 0.75,
+      "minimum_integrated_part_load_value": 0.6,
+      "capft": "ChlrWtrPosDispPathAAllQRatio_fTchwsTcwsSI",
+      "eirft": "ChlrWtrPosDispPathAAllEIRRatio_fTchwsTcwsSI",
+      "eirfplr": "ChlrWtrPosDispPathAAllEIRRatio_fQRatio",
+      "notes": "From 90.1-2016 Table 6.8.1-3"
+    },
+    {
+      "template": "ZE AEDG Multifamily",
+      "cooling_type": "WaterCooled",
+      "condenser_type": null,
+      "compressor_type": "Scroll",
+      "absorption_type": null,
+      "variable_speed_drive": null,
+      "minimum_capacity": 150.0,
+      "maximum_capacity": 299.99,
+      "start_date": "1919-09-09T00:00:00+00:00",
+      "end_date": "2999-09-09T00:00:00+00:00",
+      "minimum_full_load_efficiency": 0.72,
+      "minimum_integrated_part_load_value": 0.56,
+      "capft": "ChlrWtrPosDispPathAAllQRatio_fTchwsTcwsSI",
+      "eirft": "ChlrWtrPosDispPathAAllEIRRatio_fTchwsTcwsSI",
+      "eirfplr": "ChlrWtrPosDispPathAAllEIRRatio_fQRatio",
+      "notes": "From 90.1-2016 Table 6.8.1-3"
+    },
+    {
+      "template": "ZE AEDG Multifamily",
+      "cooling_type": "WaterCooled",
+      "condenser_type": null,
+      "compressor_type": "Scroll",
+      "absorption_type": null,
+      "variable_speed_drive": null,
+      "minimum_capacity": 300.0,
+      "maximum_capacity": 399.99,
+      "start_date": "1919-09-09T00:00:00+00:00",
+      "end_date": "2999-09-09T00:00:00+00:00",
+      "minimum_full_load_efficiency": 0.66,
+      "minimum_integrated_part_load_value": 0.54,
+      "capft": "ChlrWtrPosDispPathAAllQRatio_fTchwsTcwsSI",
+      "eirft": "ChlrWtrPosDispPathAAllEIRRatio_fTchwsTcwsSI",
+      "eirfplr": "ChlrWtrPosDispPathAAllEIRRatio_fQRatio",
+      "notes": "From 90.1-2016 Table 6.8.1-3"
+    },
+    {
+      "template": "ZE AEDG Multifamily",
+      "cooling_type": "WaterCooled",
+      "condenser_type": null,
+      "compressor_type": "Scroll",
+      "absorption_type": null,
+      "variable_speed_drive": null,
+      "minimum_capacity": 400.0,
+      "maximum_capacity": 599.99,
+      "start_date": "1919-09-09T00:00:00+00:00",
+      "end_date": "2999-09-09T00:00:00+00:00",
+      "minimum_full_load_efficiency": 0.61,
+      "minimum_integrated_part_load_value": 0.52,
+      "capft": "ChlrWtrPosDispPathAAllQRatio_fTchwsTcwsSI",
+      "eirft": "ChlrWtrPosDispPathAAllEIRRatio_fTchwsTcwsSI",
+      "eirfplr": "ChlrWtrPosDispPathAAllEIRRatio_fQRatio",
+      "notes": "From 90.1-2016 Table 6.8.1-3"
+    },
+    {
+      "template": "ZE AEDG Multifamily",
+      "cooling_type": "WaterCooled",
+      "condenser_type": null,
+      "compressor_type": "Scroll",
+      "absorption_type": null,
+      "variable_speed_drive": null,
+      "minimum_capacity": 600.0,
+      "maximum_capacity": 9999.0,
+      "start_date": "1919-09-09T00:00:00+00:00",
+      "end_date": "2999-09-09T00:00:00+00:00",
+      "minimum_full_load_efficiency": 0.56,
+      "minimum_integrated_part_load_value": 0.5,
+      "capft": "ChlrWtrPosDispPathAAllQRatio_fTchwsTcwsSI",
+      "eirft": "ChlrWtrPosDispPathAAllEIRRatio_fTchwsTcwsSI",
+      "eirfplr": "ChlrWtrPosDispPathAAllEIRRatio_fQRatio",
+      "notes": "From 90.1-2016 Table 6.8.1-3"
+    }
+  ]
+}