openstudio-standards 0.2.10 → 0.2.11.rc1

data/lib/openstudio-standards.rb

@@ -69,6 +69,7 @@ module OpenstudioStandards
   require_relative "#{stds}/ashrae_90_1/ashrae_90_1_2013/ashrae_90_1_2013"
   require_relative "#{stds}/ashrae_90_1/ashrae_90_1_2013/comstock_ashrae_90_1_2013/comstock_ashrae_90_1_2013"
   require_relative "#{stds}/ashrae_90_1/nrel_zne_ready_2017/nrel_zne_ready_2017"
+  require_relative "#{stds}/ashrae_90_1/ze_aedg_multifamily/ze_aedg_multifamily"
 
   require_relative "#{stds}/deer/deer"
   require_relative "#{stds}/deer/deer_pre_1975/deer_pre_1975"
@@ -136,6 +137,8 @@ module OpenstudioStandards
   require_relative "#{stds}/ashrae_90_1/ashrae_90_1_2010/ashrae_90_1_2010.CoolingTower"
   require_relative "#{stds}/ashrae_90_1/ashrae_90_1_2013/ashrae_90_1_2013.CoolingTower"
   require_relative "#{stds}/ashrae_90_1/nrel_zne_ready_2017/nrel_zne_ready_2017.CoolingTower"
+  require_relative "#{stds}/ashrae_90_1/ze_aedg_multifamily/ze_aedg_multifamily.CoolingTower"
+
   # Model Objects
   require_relative "#{stds}/Standards.AirLoopHVAC"
   require_relative "#{stds}/Standards.AirTerminalSingleDuctParallelPIUReheat"
@@ -243,6 +246,20 @@ module OpenstudioStandards
   require_relative "#{stds}/ashrae_90_1/nrel_zne_ready_2017/nrel_zne_ready_2017.Space"
   require_relative "#{stds}/ashrae_90_1/nrel_zne_ready_2017/nrel_zne_ready_2017.ThermalZone"
   require_relative "#{stds}/ashrae_90_1/nrel_zne_ready_2017/nrel_zne_ready_2017.ZoneHVACComponent"
+  # ZE AEDG Multifamily
+  require_relative "#{stds}/ashrae_90_1/ze_aedg_multifamily/ze_aedg_multifamily.AirLoopHVAC"
+  require_relative "#{stds}/ashrae_90_1/ze_aedg_multifamily/ze_aedg_multifamily.AirTerminalSingleDuctVAVReheat"
+  require_relative "#{stds}/ashrae_90_1/ze_aedg_multifamily/ze_aedg_multifamily.CoolingTower"
+  require_relative "#{stds}/ashrae_90_1/ze_aedg_multifamily/ze_aedg_multifamily.CoolingTowerSingleSpeed"
+  require_relative "#{stds}/ashrae_90_1/ze_aedg_multifamily/ze_aedg_multifamily.CoolingTowerTwoSpeed"
+  require_relative "#{stds}/ashrae_90_1/ze_aedg_multifamily/ze_aedg_multifamily.CoolingTowerVariableSpeed"
+  require_relative "#{stds}/ashrae_90_1/ze_aedg_multifamily/ze_aedg_multifamily.FanVariableVolume"
+  require_relative "#{stds}/ashrae_90_1/ze_aedg_multifamily/ze_aedg_multifamily.HeatExchangerSensLat"
+  require_relative "#{stds}/ashrae_90_1/ze_aedg_multifamily/ze_aedg_multifamily.Model"
+  require_relative "#{stds}/ashrae_90_1/ze_aedg_multifamily/ze_aedg_multifamily.PlantLoop"
+  require_relative "#{stds}/ashrae_90_1/ze_aedg_multifamily/ze_aedg_multifamily.Space"
+  require_relative "#{stds}/ashrae_90_1/ze_aedg_multifamily/ze_aedg_multifamily.ThermalZone"
+  require_relative "#{stds}/ashrae_90_1/ze_aedg_multifamily/ze_aedg_multifamily.ZoneHVACComponent"
   # DEER Common
   require_relative "#{stds}/deer/deer.Model"
   require_relative "#{stds}/deer/deer.AirLoopHVAC"
@@ -358,9 +375,19 @@ module OpenstudioStandards
   require_relative "#{proto}/ashrae_90_1/nrel_nze_ready_2017/nrel_zne_ready_2017.FanConstantVolume"
   require_relative "#{proto}/ashrae_90_1/nrel_nze_ready_2017/nrel_zne_ready_2017.FanOnOff"
   require_relative "#{proto}/ashrae_90_1/nrel_nze_ready_2017/nrel_zne_ready_2017.FanVariableVolume"
+  require_relative "#{proto}/ashrae_90_1/nrel_nze_ready_2017/nrel_zne_ready_2017.HeatExchangerAirToAirSensibleAndLatent"
   require_relative "#{proto}/ashrae_90_1/nrel_nze_ready_2017/nrel_zne_ready_2017.Model"
   require_relative "#{proto}/ashrae_90_1/nrel_nze_ready_2017/nrel_zne_ready_2017.Model.elevators"
   require_relative "#{proto}/ashrae_90_1/nrel_nze_ready_2017/nrel_zne_ready_2017.hvac_systems"
+  # ZE AEDG Multifamily
+  require_relative "#{proto}/ashrae_90_1/ze_aedg_multifamily/ze_aedg_multifamily.AirTerminalSingleDuctVAVReheat"
+  require_relative "#{proto}/ashrae_90_1/ze_aedg_multifamily/ze_aedg_multifamily.FanConstantVolume"
+  require_relative "#{proto}/ashrae_90_1/ze_aedg_multifamily/ze_aedg_multifamily.FanOnOff"
+  require_relative "#{proto}/ashrae_90_1/ze_aedg_multifamily/ze_aedg_multifamily.FanVariableVolume"
+  require_relative "#{proto}/ashrae_90_1/ze_aedg_multifamily/ze_aedg_multifamily.HeatExchangerAirToAirSensibleAndLatent"
+  require_relative "#{proto}/ashrae_90_1/ze_aedg_multifamily/ze_aedg_multifamily.Model"
+  require_relative "#{proto}/ashrae_90_1/ze_aedg_multifamily/ze_aedg_multifamily.Model.elevators"
+  require_relative "#{proto}/ashrae_90_1/ze_aedg_multifamily/ze_aedg_multifamily.hvac_systems"
   # DEER
   require_relative "#{proto}/deer/deer.Model"
   # CBES Common

data/lib/openstudio-standards/btap/btap.model.rb

@@ -589,10 +589,10 @@ class OpenStudio::Model::Model
   #@param factor [Float]
   def scale_oa_loads(factor)
     self.getDesignSpecificationOutdoorAirs.sort.each do |oa_def|
-      oa_def.setOutdoorAirFlowperPerson(oa_def.getOutdoorAirFlowperPerson * factor) unless oa_def.isOutdoorAirFlowperPersonDefaulted
-      oa_def.setOutdoorAirFlowperFloorArea(oa_def.getOutdoorAirFlowperFloorArea * factor) unless oa_def.isOutdoorAirFlowperFloorAreaDefaulted
-      oa_def.setOutdoorAirFlowRate(oa_def.getOutdoorAirFlowRate * factor) unless oa_def.isOutdoorAirFlowRateDefaulted
-      oa_def.setOutdoorAirFlowAirChangesperHour(oa_def.getOutdoorAirFlowAirChangesperHour * factor) unless oa_def.isOutdoorAirFlowAirChangesperHourDefaulted
+      oa_def.setOutdoorAirFlowperPerson(oa_def.outdoorAirFlowperPerson * factor) unless oa_def.isOutdoorAirFlowperPersonDefaulted
+      oa_def.setOutdoorAirFlowperFloorArea(oa_def.outdoorAirFlowperFloorArea * factor) unless oa_def.isOutdoorAirFlowperFloorAreaDefaulted
+      oa_def.setOutdoorAirFlowRate(oa_def.outdoorAirFlowRate * factor) unless oa_def.isOutdoorAirFlowRateDefaulted
+      oa_def.setOutdoorAirFlowAirChangesperHour(oa_def.outdoorAirFlowAirChangesperHour * factor) unless oa_def.isOutdoorAirFlowAirChangesperHourDefaulted
     end
   end
 

data/lib/openstudio-standards/btap/btap_result.rb

@@ -326,7 +326,7 @@ module BTAP
         if !space.waterUseEquipment.empty?
           waterUseEquipment_info={}
           spaceinfo[:waterUseEquipment] << waterUseEquipment_info
-          waterUseEquipment_info[:peak_flow_rate]= space.waterUseEquipment[0].waterUseEquipmentDefinition.getPeakFlowRate.value
+          waterUseEquipment_info[:peak_flow_rate]= space.waterUseEquipment[0].waterUseEquipmentDefinition.peakFlowRate
           waterUseEquipment_info[:peak_flow_rate_per_area] = waterUseEquipment_info[:peak_flow_rate] / space.floorArea
           area_per_occ = space.spaceType.get.people[0].spaceFloorAreaPerPerson.get
           #                             Watt per person =             m3/s/m3                * 1000W/kW * (specific heat * dT) * m2/person
@@ -510,7 +510,7 @@ module BTAP
           air_loop_info[:cooling_coils][:dx_single_speed] << coil
           single_speed = supply_comp.to_CoilCoolingDXSingleSpeed.get
           coil[:name] = single_speed.name.get
-          coil[:cop] = single_speed.getRatedCOP.get
+          coil[:cop] = single_speed.ratedCOP.get
           coil[:nominal_total_capacity_w] = model.sqlFile().get().execAndReturnFirstDouble("SELECT Value FROM TabularDataWithStrings WHERE ReportName='EquipmentSummary' AND ReportForString='Entire Facility' AND TableName='Cooling Coils' AND ColumnName='Nominal Total Capacity' AND RowName='#{coil[:name].upcase}' ")
           coil[:nominal_total_capacity_w] = validate_optional(coil[:nominal_total_capacity_w], model, -1.0)
         end
@@ -519,8 +519,8 @@ module BTAP
           air_loop_info[:cooling_coils][:dx_two_speed] << coil
           two_speed = supply_comp.to_CoilCoolingDXTwoSpeed.get
           coil[:name] = two_speed.name.get
-          coil[:cop_low] = two_speed.getRatedLowSpeedCOP.get
-          coil[:cop_high] =  two_speed.getRatedHighSpeedCOP.get
+          coil[:cop_low] = two_speed.ratedLowSpeedCOP.get
+          coil[:cop_high] =  two_speed.ratedHighSpeedCOP.get
           coil[:nominal_total_capacity_w] = model.sqlFile().get().execAndReturnFirstDouble("SELECT Value FROM TabularDataWithStrings WHERE ReportName='EquipmentSummary' AND ReportForString='Entire Facility' AND TableName='Cooling Coils' AND ColumnName='Nominal Total Capacity' AND RowName='#{coil[:name].upcase}' ")
           coil[:nominal_total_capacity_w] = validate_optional(coil[:nominal_total_capacity_w] , model,-1.0)
         end
@@ -536,8 +536,8 @@ module BTAP
       plant_loop_info[:name] = plant_loop.name.get
       
       sizing = plant_loop.sizingPlant
-      plant_loop_info[:design_loop_exit_temperature] = sizing.getDesignLoopExitTemperature.value()
-      plant_loop_info[:loop_design_temperature_difference] = sizing.getLoopDesignTemperatureDifference.value()
+      plant_loop_info[:design_loop_exit_temperature] = sizing.designLoopExitTemperature
+      plant_loop_info[:loop_design_temperature_difference] = sizing.loopDesignTemperatureDifference
       
       #Create Container for plant equipment arrays.
       plant_loop_info[:pumps] = []
@@ -560,7 +560,7 @@ module BTAP
           pump_info[:water_flow_m3_per_s] = validate_optional(pump_info[:water_flow_m3_per_s], model, -1.0)
           pump_info[:electric_power_w] = model.sqlFile().get().execAndReturnFirstDouble("SELECT Value FROM TabularDataWithStrings WHERE ReportName='EquipmentSummary' AND ReportForString='Entire Facility' AND TableName='Pumps' AND ColumnName='Electric Power' AND RowName='#{pump_info[:name].upcase}' ")
           pump_info[:electric_power_w] = validate_optional(pump_info[:electric_power_w], model, -1.0)
-          pump_info[:motor_efficency] = pump.getMotorEfficiency.value() 
+          pump_info[:motor_efficency] = pump.motorEfficiency
         end
         
         #Collect Variable Speed
@@ -576,7 +576,7 @@ module BTAP
           pump_info[:water_flow_m3_per_s] = validate_optional(pump_info[:water_flow_m3_per_s], model, -1.0)
           pump_info[:electric_power_w] = model.sqlFile().get().execAndReturnFirstDouble("SELECT Value FROM TabularDataWithStrings WHERE ReportName='EquipmentSummary' AND ReportForString='Entire Facility' AND TableName='Pumps' AND ColumnName='Electric Power' AND RowName='#{pump_info[:name].upcase}' ")
           pump_info[:electric_power_w] = validate_optional(pump_info[:electric_power_w], model, -1.0)
-          pump_info[:motor_efficency] = pump.getMotorEfficiency.value() 
+          pump_info[:motor_efficency] = pump.motorEfficiency
         end
         
         # Collect HotWaterBoilers

data/lib/openstudio-standards/btap/economics.rb

@@ -448,12 +448,12 @@ module BTAP
             unless pump_const.plantLoop.empty?
               pump_variable = OpenStudio::Model::PumpVariableSpeed.new(model)
               #pass information from constant speed fan as much as possible.
-              pump_variable.setRatedFlowRate(pump_const.getRatedFlowRate.get)
-              pump_variable.setRatedPumpHead(pump_const.ratedPumpHead())
+              pump_variable.setRatedFlowRate(pump_const.ratedFlowRate.get)
+              pump_variable.setRatedPumpHead(pump_const.ratedPumpHead)
               pump_variable.setRatedPowerConsumption(pump_const.ratedPowerConsumption.to_f)
-              pump_variable.setMotorEfficiency(pump_const.motorEfficiency().to_f)
-              pump_variable.setPumpControlType( pump_const.pumpControlType )
-              pump_variable.setFractionofMotorInefficienciestoFluidStream(pump_const.fractionofMotorInefficienciestoFluidStream().to_f)
+              pump_variable.setMotorEfficiency(pump_const.motorEfficiency.to_f)
+              pump_variable.setPumpControlType(pump_const.pumpControlType)
+              pump_variable.setFractionofMotorInefficienciestoFluidStream(pump_const.fractionofMotorInefficienciestoFluidStream.to_f)
               pump_variable.autosizeRatedFlowRate if pump_const.isRatedFlowRateAutosized
               pump_variable.autosizeRatedPowerConsumption if pump_const.isRatedPowerConsumptionAutosized
 
@@ -474,12 +474,12 @@ module BTAP
               new_pump = OpenStudio::Model::PumpVariableSpeed.new(model)
               #pass information from constant speed fan as much as possible.
 
-              new_pump.setRatedFlowRate(pump.getRatedFlowRate.get)
-              new_pump.setRatedPumpHead(pump.ratedPumpHead())
+              new_pump.setRatedFlowRate(pump.ratedFlowRate.get)
+              new_pump.setRatedPumpHead(pump.ratedPumpHead)
               new_pump.setRatedPowerConsumption(pump.ratedPowerConsumption.to_f)
-              new_pump.setMotorEfficiency(pump.motorEfficiency().to_f)
-              new_pump.setFractionofMotorInefficienciestoFluidStream(pump.fractionofMotorInefficienciestoFluidStream().to_f)
-              new_pump.setPumpControlType( pump.pumpControlType )
+              new_pump.setMotorEfficiency(pump.motorEfficiency.to_f)
+              new_pump.setFractionofMotorInefficienciestoFluidStream(pump.fractionofMotorInefficienciestoFluidStream.to_f)
+              new_pump.setPumpControlType(pump.pumpControlType)
               new_pump.autosizeRatedFlowRate if pump.isRatedFlowRateAutosized
               new_pump.autosizeRatedPowerConsumption if pump.isRatedPowerConsumptionAutosized
               #get the hot water loop.
@@ -631,7 +631,7 @@ module BTAP
           end
           item.setHeaterFuelType(@shw_heater_fuel_type) unless @shw_heater_fuel_type.nil?
           item.setHeaterThermalEfficiency(@shw_thermal_eff) unless @shw_thermal_eff.nil?
-          log  << item.name.get.to_s << ",#{item.setpointTemperatureSchedule},#{item.heaterFuelType},#{item.getHeaterThermalEfficiency.get}\n"
+          log  << item.name.get.to_s << ",#{item.setpointTemperatureSchedule},#{item.heaterFuelType},#{item.heaterThermalEfficiency}\n"
         end
         return log
       end

data/lib/openstudio-standards/btap/envelope.rb

@@ -134,7 +134,7 @@ module BTAP
           conductance = material.to_Shade.get.thermalConductance unless material.to_Shade.empty?
           conductance = material.to_Screen.get.thermalConductance unless material.to_Screen.empty?
           conductance = material.to_MasslessOpaqueMaterial.get.thermalConductance unless material.to_MasslessOpaqueMaterial.empty?
-          conductance = 1.0/material.to_AirGap.get.getThermalResistance.get.value unless material.to_AirGap.empty?
+          conductance = 1.0/material.to_AirGap.get.thermalResistance unless material.to_AirGap.empty?
           conductance = material.to_Gas.get.getThermalConductivity(temperature_k) unless material.to_Gas.empty?
           conductance = material.to_GasMixture.get.getThermalConductance(temperature_k) unless material.to_GasMixture.empty?
           conductance = material.to_RoofVegetation.get.thermalConductance unless material.to_RoofVegetation.empty?
@@ -654,9 +654,9 @@ module BTAP
 
             construction.layers.each do |layer|
               #check to see if it is a simple glazing. If so use the SHGC method.
-              tsol = tsol * layer.to_SimpleGlazing.get.getSolarHeatGainCoefficient().value unless layer.to_SimpleGlazing.empty?
+              tsol = tsol * layer.to_SimpleGlazing.get.solarHeatGainCoefficient unless layer.to_SimpleGlazing.empty?
               #check to see if it is a standard glazing. If so use the solar transmittance method.
-              tsol = tsol * layer.to_StandardGlazing.get.solarTransmittance() unless layer.to_StandardGlazing.empty?
+              tsol = tsol * layer.to_StandardGlazing.get.solarTransmittance unless layer.to_StandardGlazing.empty?
             end
           end
           return tsol
@@ -674,9 +674,9 @@ module BTAP
           if construction.isFenestration
             construction.layers.each do |layer|
               #check to see if it is a simple glazing. If so use the SHGC method.
-              tvis = tvis * layer.to_SimpleGlazing.get.getVisibleTransmittance().get.value unless layer.to_SimpleGlazing.empty?
+              tvis = tvis * layer.to_SimpleGlazing.get.visibleTransmittance.get unless layer.to_SimpleGlazing.empty?
               #check to see if it is a standard glazing. If so use the solar transmittance method.
-              tvis = tvis * layer.to_StandardGlazing.get.visibleTransmittanceatNormalIncidence().get unless layer.to_StandardGlazing.empty?
+              tvis = tvis * layer.to_StandardGlazing.get.visibleTransmittanceatNormalIncidence.get unless layer.to_StandardGlazing.empty?
             end
           end
           return tvis

data/lib/openstudio-standards/btap/hvac.rb

@@ -1173,7 +1173,11 @@ module BTAP
               air_loop_sizing = air_loop.sizingSystem # TODO units
               air_loop_sizing.setTypeofLoadtoSizeOn("Sensible")
               air_loop_sizing.autosizeDesignOutdoorAirFlowRate
-              air_loop_sizing.setMinimumSystemAirFlowRatio(1.0)
+              if model.version < OpenStudio::VersionString.new('2.7.0')
+                air_loop_sizing.setMinimumSystemAirFlowRatio(1.0)
+              else
+                air_loop_sizing.setCentralHeatingMaximumSystemAirFlowRatio(1.0)
+              end
               air_loop_sizing.setPreheatDesignTemperature(7.0)
               air_loop_sizing.setPreheatDesignHumidityRatio(0.008)
               air_loop_sizing.setPrecoolDesignTemperature(12.8)
@@ -1301,7 +1305,11 @@ module BTAP
               air_loop_sizing = air_loop.sizingSystem
               air_loop_sizing.setTypeofLoadtoSizeOn("Sensible")
               air_loop_sizing.autosizeDesignOutdoorAirFlowRate
-              air_loop_sizing.setMinimumSystemAirFlowRatio(1.0)
+              if model.version < OpenStudio::VersionString.new('2.7.0')
+                air_loop_sizing.setMinimumSystemAirFlowRatio(1.0)
+              else
+                air_loop_sizing.setCentralHeatingMaximumSystemAirFlowRatio(1.0)
+              end
               air_loop_sizing.setPreheatDesignTemperature(7.0)
               air_loop_sizing.setPreheatDesignHumidityRatio(0.008)
               air_loop_sizing.setPrecoolDesignTemperature(12.8)
@@ -2186,7 +2194,11 @@ module BTAP
               sizingSystem = air_loop.sizingSystem
               sizingSystem.setTypeofLoadtoSizeOn("Sensible")
               sizingSystem.autosizeDesignOutdoorAirFlowRate()
-              sizingSystem.setMinimumSystemAirFlowRatio(1.0)
+              if model.version < OpenStudio::VersionString.new('2.7.0')
+                air_loop_sizing.setMinimumSystemAirFlowRatio(1.0)
+              else
+                air_loop_sizing.setCentralHeatingMaximumSystemAirFlowRatio(1.0)
+              end
               sizingSystem.setPreheatDesignTemperature(7.0)
               sizingSystem.setPreheatDesignHumidityRatio(0.008)
               sizingSystem.setPrecoolDesignTemperature(12.8)
@@ -2250,7 +2262,11 @@ module BTAP
               sizingSystem = air_loop.sizingSystem
               sizingSystem.setTypeofLoadtoSizeOn("Sensible")
               sizingSystem.autosizeDesignOutdoorAirFlowRate()
-              sizingSystem.setMinimumSystemAirFlowRatio(1.0)
+              if model.version < OpenStudio::VersionString.new('2.7.0')
+                air_loop_sizing.setMinimumSystemAirFlowRatio(1.0)
+              else
+                air_loop_sizing.setCentralHeatingMaximumSystemAirFlowRatio(1.0)
+              end
               sizingSystem.setPreheatDesignTemperature(7.0)
               sizingSystem.setPreheatDesignHumidityRatio(0.008)
               sizingSystem.setPrecoolDesignTemperature(12.8)
@@ -2386,7 +2402,11 @@ module BTAP
               air_loop_sizing = mau_air_loop.sizingSystem # TODO units
               air_loop_sizing.setTypeofLoadtoSizeOn("VentilationRequirement")
               air_loop_sizing.autosizeDesignOutdoorAirFlowRate
-              air_loop_sizing.setMinimumSystemAirFlowRatio(1.0)
+              if model.version < OpenStudio::VersionString.new('2.7.0')
+                air_loop_sizing.setMinimumSystemAirFlowRatio(1.0)
+              else
+                air_loop_sizing.setCentralHeatingMaximumSystemAirFlowRatio(1.0)
+              end
               air_loop_sizing.setPreheatDesignTemperature(7.0)
               air_loop_sizing.setPreheatDesignHumidityRatio(0.008)
               air_loop_sizing.setPrecoolDesignTemperature(13.0)
@@ -2586,7 +2606,11 @@ module BTAP
               air_loop_sizing = mau_air_loop.sizingSystem # TODO units
               air_loop_sizing.setTypeofLoadtoSizeOn("Sensible")
               air_loop_sizing.autosizeDesignOutdoorAirFlowRate
-              air_loop_sizing.setMinimumSystemAirFlowRatio(1.0)
+              if model.version < OpenStudio::VersionString.new('2.7.0')
+                air_loop_sizing.setMinimumSystemAirFlowRatio(1.0)
+              else
+                air_loop_sizing.setCentralHeatingMaximumSystemAirFlowRatio(1.0)
+              end
               air_loop_sizing.setPreheatDesignTemperature(7.0)
               air_loop_sizing.setPreheatDesignHumidityRatio(0.008)
               air_loop_sizing.setPrecoolDesignTemperature(12.8)
@@ -2853,7 +2877,11 @@ module BTAP
             air_loop_sizing = air_loop.sizingSystem # TODO units
             air_loop_sizing.setTypeofLoadtoSizeOn("Sensible")
             air_loop_sizing.autosizeDesignOutdoorAirFlowRate
-            air_loop_sizing.setMinimumSystemAirFlowRatio(1.0)
+            if model.version < OpenStudio::VersionString.new('2.7.0')
+              air_loop_sizing.setMinimumSystemAirFlowRatio(1.0)
+            else
+              air_loop_sizing.setCentralHeatingMaximumSystemAirFlowRatio(1.0)
+            end
             air_loop_sizing.setPreheatDesignTemperature(7.0)
             air_loop_sizing.setPreheatDesignHumidityRatio(0.008)
             air_loop_sizing.setPrecoolDesignTemperature(13.0)
@@ -2981,7 +3009,11 @@ module BTAP
               air_loop_sizing = air_loop.sizingSystem # TODO units
               air_loop_sizing.setTypeofLoadtoSizeOn("Sensible")
               air_loop_sizing.autosizeDesignOutdoorAirFlowRate
-              air_loop_sizing.setMinimumSystemAirFlowRatio(1.0)
+              if model.version < OpenStudio::VersionString.new('2.7.0')
+                air_loop_sizing.setMinimumSystemAirFlowRatio(1.0)
+              else
+                air_loop_sizing.setCentralHeatingMaximumSystemAirFlowRatio(1.0)
+              end
               air_loop_sizing.setPreheatDesignTemperature(7.0)
               air_loop_sizing.setPreheatDesignHumidityRatio(0.008)
               air_loop_sizing.setPrecoolDesignTemperature(13.0)
@@ -3136,7 +3168,11 @@ module BTAP
               air_loop_sizing = air_loop.sizingSystem # TODO units
               air_loop_sizing.setTypeofLoadtoSizeOn("Sensible")
               air_loop_sizing.autosizeDesignOutdoorAirFlowRate
-              air_loop_sizing.setMinimumSystemAirFlowRatio(1.0)
+              if model.version < OpenStudio::VersionString.new('2.7.0')
+                air_loop_sizing.setMinimumSystemAirFlowRatio(1.0)
+              else
+                air_loop_sizing.setCentralHeatingMaximumSystemAirFlowRatio(1.0)
+              end
               air_loop_sizing.setPreheatDesignTemperature(7.0)
               air_loop_sizing.setPreheatDesignHumidityRatio(0.008)
               air_loop_sizing.setPrecoolDesignTemperature(13.0)
@@ -3308,7 +3344,11 @@ module BTAP
               air_loop_sizing = air_loop.sizingSystem # TODO units
               air_loop_sizing.setTypeofLoadtoSizeOn("Sensible")
               air_loop_sizing.autosizeDesignOutdoorAirFlowRate
-              air_loop_sizing.setMinimumSystemAirFlowRatio(1.0)
+              if model.version < OpenStudio::VersionString.new('2.7.0')
+                air_loop_sizing.setMinimumSystemAirFlowRatio(1.0)
+              else
+                air_loop_sizing.setCentralHeatingMaximumSystemAirFlowRatio(1.0)
+              end
               air_loop_sizing.setPreheatDesignTemperature(7.0)
               air_loop_sizing.setPreheatDesignHumidityRatio(0.008)
               air_loop_sizing.setPrecoolDesignTemperature(13.0)
@@ -3462,7 +3502,11 @@ module BTAP
                 sizingSystem.setCentralCoolingDesignSupplyAirTemperature(13.0)
                 sizingSystem.setCentralHeatingDesignSupplyAirTemperature(13.1)
                 sizingSystem.autosizeDesignOutdoorAirFlowRate
-                sizingSystem.setMinimumSystemAirFlowRatio(0.3)
+                if model.version < OpenStudio::VersionString.new('2.7.0')
+                  air_loop_sizing.setMinimumSystemAirFlowRatio(0.3)
+                else
+                  air_loop_sizing.setCentralHeatingMaximumSystemAirFlowRatio(0.3)
+                end
                 sizingSystem.setPreheatDesignTemperature(7.0)
                 sizingSystem.setPreheatDesignHumidityRatio(0.008)
                 sizingSystem.setPrecoolDesignTemperature(13.0)

data/lib/openstudio-standards/btap/measures.rb

@@ -906,12 +906,12 @@ module BTAP
             unless pump_const.plantLoop.empty?
               pump_variable = OpenStudio::Model::PumpVariableSpeed.new(model)
               #pass information from constant speed fan as much as possible.
-              pump_variable.setRatedFlowRate(pump_const.getRatedFlowRate.get)
-              pump_variable.setRatedPumpHead(pump_const.ratedPumpHead())
+              pump_variable.setRatedFlowRate(pump_const.ratedFlowRate)
+              pump_variable.setRatedPumpHead(pump_const.ratedPumpHead)
               pump_variable.setRatedPowerConsumption(pump_const.ratedPowerConsumption.to_f)
-              pump_variable.setMotorEfficiency(pump_const.motorEfficiency().to_f)
-              pump_variable.setPumpControlType( pump_const.pumpControlType )
-              pump_variable.setFractionofMotorInefficienciestoFluidStream(pump_const.fractionofMotorInefficienciestoFluidStream().to_f)
+              pump_variable.setMotorEfficiency(pump_const.motorEfficiency.to_f)
+              pump_variable.setPumpControlType(pump_const.pumpControlType)
+              pump_variable.setFractionofMotorInefficienciestoFluidStream(pump_const.fractionofMotorInefficienciestoFluidStream.to_f)
               pump_variable.autosizeRatedFlowRate if pump_const.isRatedFlowRateAutosized
               pump_variable.autosizeRatedPowerConsumption if pump_const.isRatedPowerConsumptionAutosized
 
@@ -932,7 +932,7 @@ module BTAP
               new_pump = OpenStudio::Model::PumpVariableSpeed.new(model)
               #pass information from constant speed fan as much as possible.
 
-              new_pump.setRatedFlowRate(pump.getRatedFlowRate.get)
+              new_pump.setRatedFlowRate(pump.ratedFlowRate.get)
               new_pump.setRatedPumpHead(pump.ratedPumpHead())
               new_pump.setRatedPowerConsumption(pump.ratedPowerConsumption.to_f)
               new_pump.setMotorEfficiency(pump.motorEfficiency().to_f)
@@ -1071,7 +1071,7 @@ module BTAP
           end
           item.setHeaterFuelType(@shw_heater_fuel_type) unless @shw_heater_fuel_type.nil?
           item.setHeaterThermalEfficiency(@shw_thermal_eff) unless @shw_thermal_eff.nil?
-          log  << item.name.get.to_s << ",#{item.setpointTemperatureSchedule},#{item.heaterFuelType},#{item.getHeaterThermalEfficiency.get}\n"
+          log  << item.name.get.to_s << ",#{item.setpointTemperatureSchedule},#{item.heaterFuelType},#{item.heaterThermalEfficiency}\n"
         end
         return log
       end

data/lib/openstudio-standards/btap/spaceloads.rb

@@ -151,10 +151,10 @@ module BTAP
         #@param factor [Float]
         def self.scale_oa_loads( model, factor )
           model.getDesignSpecificationOutdoorAirs.sort.each do |oa_def|
-            oa_def.setOutdoorAirFlowperPerson(oa_def.getOutdoorAirFlowperPerson * factor ) unless oa_def.isOutdoorAirFlowperPersonDefaulted
-            oa_def.setOutdoorAirFlowperFloorArea(oa_def.getOutdoorAirFlowperFloorArea * factor) unless oa_def.isOutdoorAirFlowperFloorAreaDefaulted
-            oa_def.setOutdoorAirFlowRate(oa_def.getOutdoorAirFlowRate * factor) unless oa_def.isOutdoorAirFlowRateDefaulted
-            oa_def.setOutdoorAirFlowAirChangesperHour(oa_def.getOutdoorAirFlowAirChangesperHour * factor ) unless oa_def.isOutdoorAirFlowAirChangesperHourDefaulted
+            oa_def.setOutdoorAirFlowperPerson(oa_def.outdoorAirFlowperPerson * factor ) unless oa_def.isOutdoorAirFlowperPersonDefaulted
+            oa_def.setOutdoorAirFlowperFloorArea(oa_def.outdoorAirFlowperFloorArea * factor) unless oa_def.isOutdoorAirFlowperFloorAreaDefaulted
+            oa_def.setOutdoorAirFlowRate(oa_def.outdoorAirFlowRate * factor) unless oa_def.isOutdoorAirFlowRateDefaulted
+            oa_def.setOutdoorAirFlowAirChangesperHour(oa_def.outdoorAirFlowAirChangesperHour * factor ) unless oa_def.isOutdoorAirFlowAirChangesperHourDefaulted
           end
         end
 

data/lib/openstudio-standards/hvac_sizing/Siz.AirLoopHVAC.rb

@@ -26,5 +26,109 @@ class OpenStudio::Model::AirLoopHVAC
     
   end
   
-  
+  # Retrieves an airloop sum of air terminal minimum heating flow rates: sum(Vpz_min)
+  def autosizeSumMinimumHeatingAirFlowRates
+    result = OpenStudio::OptionalDouble.new
+    name = self.name.get.upcase
+    sql = self.model.sqlFile
+    if sql.is_initialized
+      sql = sql.get    
+      query = "SELECT Value 
+              FROM tabulardatawithstrings
+              WHERE ReportName='ComponentSizingSummary' 
+              AND ReportForString='Entire Facility' 
+              AND TableName='AirLoopHVAC'
+              AND ColumnName='Sum of Air Terminal Minimum Heating Flow Rates'
+              AND RowName='#{name}'
+              AND Units='m3/s'"
+      val = sql.execAndReturnFirstDouble(query)
+      if val.is_initialized
+        result = OpenStudio::OptionalDouble.new(val.get)
+      end
+    else
+      OpenStudio::logFree(OpenStudio::Error, 'openstudio.model.Model', 'Model has no sql file containing results, cannot lookup data.')
+    end
+
+    return result.to_f
+
+  end
+
+  # Retrieve an airloop's design outdoor air intake (Vot)
+  # Ideally, this would only be used to retrieve Vot when 
+  # calculated by EnergyPlus' built-in design VRP calculations
+  def autosize621OutdoorAirIntakeFlow
+    flow_types = ['Heating', 'Cooling']
+    flow_rates = []
+    flow_types.each do |flow_type|
+      result = OpenStudio::OptionalDouble.new
+      name = self.name.get.upcase
+      sql = self.model.sqlFile
+      if sql.is_initialized
+        sql = sql.get    
+        query = "SELECT Value 
+                FROM tabulardatawithstrings
+                WHERE ReportName='Standard62.1Summary' 
+                AND ReportForString='Entire Facility' 
+                AND TableName='System Ventilation Requirements for #{flow_type}'
+                AND ColumnName='Outdoor Air Intake Flow Vot'
+                AND RowName='#{name}'
+                AND Units='m3/s'"
+        val = sql.execAndReturnFirstDouble(query)
+        if val.is_initialized
+          result = OpenStudio::OptionalDouble.new(val.get)
+        end
+        # Inconsistency in column name in EnergyPlus 9.0: 
+        # "Outdoor Air Intake Flow - Vot" vs "Outdoor Air Intake Flow Vot"
+        # The following could be deleted if the inconsistency was ever fixed
+        if result.to_f == 0.0
+          query = "SELECT Value 
+          FROM tabulardatawithstrings
+          WHERE ReportName='Standard62.1Summary' 
+          AND ReportForString='Entire Facility' 
+          AND TableName='System Ventilation Requirements for #{flow_type}'
+          AND ColumnName='Outdoor Air Intake Flow - Vot'
+          AND RowName='#{name}'
+          AND Units='m3/s'"
+          val = sql.execAndReturnFirstDouble(query)
+          if val.is_initialized
+            result = OpenStudio::OptionalDouble.new(val.get)
+          end
+        end
+      else
+        OpenStudio::logFree(OpenStudio::Error, 'openstudio.model.Model', 'Model has no sql file containing results, cannot lookup data.')
+      end
+      flow_rates << result.to_f
+    end
+
+    return flow_rates.max
+
+  end
+
+  # Retrieve an airloop's sum of air terminal maximum flow rates: sum(Vpz)
+  def autosizeSumAirTerminalMaxAirFlowRate
+    result = OpenStudio::OptionalDouble.new
+    name = self.name.get.upcase
+    sql = self.model.sqlFile
+    if sql.is_initialized
+      sql = sql.get    
+      query = "SELECT Value 
+              FROM tabulardatawithstrings
+              WHERE ReportName='ComponentSizingSummary' 
+              AND ReportForString='Entire Facility' 
+              AND TableName='AirLoopHVAC'
+              AND ColumnName='Sum of Air Terminal Maximum Flow Rates'
+              AND RowName='#{name}'
+              AND Units='m3/s'"
+      val = sql.execAndReturnFirstDouble(query)
+      if val.is_initialized
+        result = OpenStudio::OptionalDouble.new(val.get)
+      end
+    else
+      OpenStudio::logFree(OpenStudio::Error, 'openstudio.model.Model', 'Model has no sql file containing results, cannot lookup data.')
+    end
+
+    return result.to_f
+
+  end
+
 end