openstudio-geb 0.0.1 → 0.0.2

data/lib/measures/Enable Demand Controlled Ventilation/tests/MediumOffice-90.1-2010-ASHRAE 169-2013-5A_dcv/measures/Enable Demand Controlled Ventilation/tests/EnableDemandControlledVentilation_Test.rb

@@ -1,123 +0,0 @@
-# frozen_string_literal: true
-
-# *******************************************************************************
-# OpenStudio(R), Copyright (c) 2008-2020, Alliance for Sustainable Energy, LLC.
-# All rights reserved.
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are met:
-#
-# (1) Redistributions of source code must retain the above copyright notice,
-# this list of conditions and the following disclaimer.
-#
-# (2) Redistributions in binary form must reproduce the above copyright notice,
-# this list of conditions and the following disclaimer in the documentation
-# and/or other materials provided with the distribution.
-#
-# (3) Neither the name of the copyright holder nor the names of any contributors
-# may be used to endorse or promote products derived from this software without
-# specific prior written permission from the respective party.
-#
-# (4) Other than as required in clauses (1) and (2), distributions in any form
-# of modifications or other derivative works may not use the "OpenStudio"
-# trademark, "OS", "os", or any other confusingly similar designation without
-# specific prior written permission from Alliance for Sustainable Energy, LLC.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) AND ANY CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
-# THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER(S), ANY CONTRIBUTORS, THE
-# UNITED STATES GOVERNMENT, OR THE UNITED STATES DEPARTMENT OF ENERGY, NOR ANY OF
-# THEIR EMPLOYEES, BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
-# OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-# *******************************************************************************
-
-require 'openstudio'
-require 'openstudio/measure/ShowRunnerOutput'
-require 'fileutils'
-
-require_relative '../measure.rb'
-require 'minitest/autorun'
-
-class EnableDemandControlledVentilation_Test < Minitest::Test
-  def test_EnableDemandControlledVentilation
-    # create an instance of the measure
-    measure = EnableDemandControlledVentilation.new
-
-    # create an instance of a runner
-    runner = OpenStudio::Measure::OSRunner.new(OpenStudio::WorkflowJSON.new)
-
-    # make an empty model
-    model = OpenStudio::Model::Model.new
-
-    # get arguments and test that they are what we are expecting
-    arguments = measure.arguments(model)
-    assert_equal(1, arguments.size)
-
-    # load the test model
-    translator = OpenStudio::OSVersion::VersionTranslator.new
-    path = OpenStudio::Path.new(File.dirname(__FILE__) + '/0320_ModelWithHVAC_01.osm')
-    model = translator.loadModel(path)
-    assert(!model.empty?)
-    model = model.get
-
-    # set argument values to good values and run the measure on model with spaces
-    arguments = measure.arguments(model)
-    argument_map = OpenStudio::Measure.convertOSArgumentVectorToMap(arguments)
-
-    count = -1
-
-    dcv_type = arguments[count += 1].clone
-    assert(dcv_type.setValue('EnableDCV'))
-    argument_map['dcv_type'] = dcv_type
-
-    measure.run(model, runner, argument_map)
-    result = runner.result
-    show_output(result)
-    assert(result.value.valueName == 'Success')
-    # assert(result.warnings.size == 2)
-    # assert(result.info.size == 1)
-  end
-
-  def test_DisableDemandControlledVentilation
-    # create an instance of the measure
-    measure = EnableDemandControlledVentilation.new
-
-    # create an instance of a runner
-    runner = OpenStudio::Measure::OSRunner.new(OpenStudio::WorkflowJSON.new)
-
-    # make an empty model
-    model = OpenStudio::Model::Model.new
-
-    # get arguments and test that they are what we are expecting
-    arguments = measure.arguments(model)
-    assert_equal(1, arguments.size)
-
-    # load the test model
-    translator = OpenStudio::OSVersion::VersionTranslator.new
-    path = OpenStudio::Path.new(File.dirname(__FILE__) + '/0320_ModelWithHVAC_01.osm')
-    model = translator.loadModel(path)
-    assert(!model.empty?)
-    model = model.get
-
-    # set argument values to good values and run the measure on model with spaces
-    arguments = measure.arguments(model)
-    argument_map = OpenStudio::Measure.convertOSArgumentVectorToMap(arguments)
-
-    count = -1
-
-    dcv_type = arguments[count += 1].clone
-    assert(dcv_type.setValue('DisableDCV'))
-    argument_map['dcv_type'] = dcv_type
-
-    measure.run(model, runner, argument_map)
-    result = runner.result
-    show_output(result)
-    assert(result.value.valueName == 'NA')
-    # assert(result.warnings.size == 2)
-    # assert(result.info.size == 1)
-  end
-end

data/lib/measures/Enable Demand Controlled Ventilation/tests/MediumOffice-90.1-2010-ASHRAE 169-2013-5A_dcv/measures/Set Electric Equipment loads by EPD/LICENSE.md

@@ -1,27 +0,0 @@
-OpenStudio(R), Copyright (c) 2008-2020, Alliance for Sustainable Energy, LLC. All rights reserved.
-
-Redistribution and use in source and binary forms, with or without modification, are permitted 
-provided that the following conditions are met:
-
-(1) Redistributions of source code must retain the above copyright notice, this list of conditions 
-and the following disclaimer.
-
-(2) Redistributions in binary form must reproduce the above copyright notice, this list of conditions
-and the following disclaimer in the documentation and/or other materials provided with the distribution.
-
-(3) Neither the name of the copyright holder nor the names of any contributors may be used to endorse 
-or promote products derived from this software without specific prior written permission from the 
-respective party.
-
-(4) Other than as required in clauses (1) and (2), distributions in any form of modifications or other 
-derivative works may not use the "OpenStudio" trademark, "OS", "os", or any other confusingly similar 
-designation without specific prior written permission from Alliance for Sustainable Energy, LLC.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED 
-WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 
-PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER, THE UNITED STATES GOVERNMENT, 
-OR ANY CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 
-DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, 
-OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
-STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
-SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

data/lib/measures/Enable Demand Controlled Ventilation/tests/MediumOffice-90.1-2010-ASHRAE 169-2013-5A_dcv/measures/Set Electric Equipment loads by EPD/README.md

@@ -1,136 +0,0 @@
-
-
-###### (Automatically generated documentation)
-
-# Set Electric Equipment loads by EPD
-
-## Description
-Set the electric equipment power density (W/ft^2) in the to a specified value for all spaces that have electric equipment. This can be applied to the entire building or a specific space type. Cost can be added per floor area
-
-## Modeler Description
-Delete all of the existing electric equipment in the model. Add electric equipment with the user defined electric equipment power density to all spaces that initially had electric equipment, using the schedule from the original electric equipment. If multiple electric equipment existed the schedule will be pulled from the one with the highest electric equipment power density value. Demolition costs from electric equipment removed by this measure can be included in the analysis.
-
-## Measure Type
-ModelMeasure
-
-## Taxonomy
-
-
-## Arguments
-
-
-### Apply the Measure to a Specific Space Type or to the Entire Model
-
-**Name:** space_type,
-**Type:** Choice,
-**Units:** ,
-**Required:** true,
-**Model Dependent:** false
-
-
-**Choice Display Names** ["*Entire Building*"]
-
-
-
-### Lighting Power Density (W/ft^2)
-
-**Name:** epd,
-**Type:** Double,
-**Units:** ,
-**Required:** true,
-**Model Dependent:** false
-
-
-
-
-### Add electric equipment to all spaces included in floor area, including spaces that did not originally include electric equipment
-
-**Name:** add_instance_all_spaces,
-**Type:** Boolean,
-**Units:** ,
-**Required:** true,
-**Model Dependent:** false
-
-
-
-
-### Material and Installation Costs for Lights per Floor Area ($/ft^2).
-
-**Name:** material_cost,
-**Type:** Double,
-**Units:** ,
-**Required:** true,
-**Model Dependent:** false
-
-
-
-
-### Demolition Costs for Lights per Floor Area ($/ft^2).
-
-**Name:** demolition_cost,
-**Type:** Double,
-**Units:** ,
-**Required:** true,
-**Model Dependent:** false
-
-
-
-
-### Years Until Costs Start (whole years).
-
-**Name:** years_until_costs_start,
-**Type:** Integer,
-**Units:** ,
-**Required:** true,
-**Model Dependent:** false
-
-
-
-
-### Demolition Costs Occur During Initial Construction?
-
-**Name:** demo_cost_initial_const,
-**Type:** Boolean,
-**Units:** ,
-**Required:** true,
-**Model Dependent:** false
-
-
-
-
-### Expected Life (whole years).
-
-**Name:** expected_life,
-**Type:** Integer,
-**Units:** ,
-**Required:** true,
-**Model Dependent:** false
-
-
-
-
-### O & M Costs for Lights per Floor Area ($/ft^2).
-
-**Name:** om_cost,
-**Type:** Double,
-**Units:** ,
-**Required:** true,
-**Model Dependent:** false
-
-
-
-
-### O & M Frequency (whole years).
-
-**Name:** om_frequency,
-**Type:** Integer,
-**Units:** ,
-**Required:** true,
-**Model Dependent:** false
-
-
-
-
-
-
-

data/lib/measures/Enable Demand Controlled Ventilation/tests/MediumOffice-90.1-2010-ASHRAE 169-2013-5A_dcv/measures/Set Electric Equipment loads by EPD/README.md.erb

@@ -1,47 +0,0 @@
-<%#= README.md.erb is used to auto-generate README.md. %>
-<%#= To manually maintain README.md throw away README.md.erb and manually edit README.md %>
-###### (Automatically generated documentation)
-
-# <%= name %>
-
-## Description
-<%= description %>
-
-## Modeler Description
-<%= modelerDescription %>
-
-## Measure Type
-<%= measureType %>
-
-## Taxonomy
-<%= taxonomy %>
-
-## Arguments
-
-<% arguments.each do |argument| %>
-### <%= argument[:display_name] %>
-<%= argument[:description] %>
-**Name:** <%= argument[:name] %>,
-**Type:** <%= argument[:type] %>,
-**Units:** <%= argument[:units] %>,
-**Required:** <%= argument[:required] %>,
-**Model Dependent:** <%= argument[:model_dependent] %>
-
-<% if argument[:type] == "Choice" && !argument[:model_dependent]%>
-**Choice Display Names** <%= argument[:choice_display_names] %>
-<% end %>
-
-<% end %>
-
-<% if arguments.size == 0 %>
-<%= "This measure does not have any user arguments" %>
-<% end %>
-
-<% if outputs.size > 0 %>
-## Outputs
-<% output_names = [] %>
-<% outputs.each do |output| %>
-<% output_names << output[:display_name] %>
-<% end %>
-<%= output_names.join(", ") %>
-<% end %>