openstudio-geb 0.0.1 → 0.0.2

data/lib/measures/Enable Demand Controlled Ventilation/tests/MediumOffice-90.1-2010-ASHRAE 169-2013-5A_dcv/measures/Enable Demand Controlled Ventilation/LICENSE.md

@@ -1,27 +0,0 @@
-OpenStudio(R), Copyright (c) 2008-2020, Alliance for Sustainable Energy, LLC. All rights reserved.
-
-Redistribution and use in source and binary forms, with or without modification, are permitted 
-provided that the following conditions are met:
-
-(1) Redistributions of source code must retain the above copyright notice, this list of conditions 
-and the following disclaimer.
-
-(2) Redistributions in binary form must reproduce the above copyright notice, this list of conditions
-and the following disclaimer in the documentation and/or other materials provided with the distribution.
-
-(3) Neither the name of the copyright holder nor the names of any contributors may be used to endorse 
-or promote products derived from this software without specific prior written permission from the 
-respective party.
-
-(4) Other than as required in clauses (1) and (2), distributions in any form of modifications or other 
-derivative works may not use the "OpenStudio" trademark, "OS", "os", or any other confusingly similar 
-designation without specific prior written permission from Alliance for Sustainable Energy, LLC.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED 
-WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 
-PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER, THE UNITED STATES GOVERNMENT, 
-OR ANY CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 
-DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, 
-OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
-STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
-SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

data/lib/measures/Enable Demand Controlled Ventilation/tests/MediumOffice-90.1-2010-ASHRAE 169-2013-5A_dcv/measures/Enable Demand Controlled Ventilation/README.md

@@ -1,32 +0,0 @@
-
-
-###### (Automatically generated documentation)
-
-# Enable Demand Controlled Ventilation
-
-## Description
-
-
-## Modeler Description
-
-
-## Measure Type
-ModelMeasure
-
-## Taxonomy
-
-
-## Arguments
-
-
-### DCV Type
-
-**Name:** dcv_type,
-**Type:** Choice,
-**Units:** ,
-**Required:** true,
-**Model Dependent:** false
-
-
-
-

data/lib/measures/Enable Demand Controlled Ventilation/tests/MediumOffice-90.1-2010-ASHRAE 169-2013-5A_dcv/measures/Enable Demand Controlled Ventilation/measure.rb

@@ -1,156 +0,0 @@
-# frozen_string_literal: true
-
-# *******************************************************************************
-# OpenStudio(R), Copyright (c) 2008-2020, Alliance for Sustainable Energy, LLC.
-# All rights reserved.
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are met:
-#
-# (1) Redistributions of source code must retain the above copyright notice,
-# this list of conditions and the following disclaimer.
-#
-# (2) Redistributions in binary form must reproduce the above copyright notice,
-# this list of conditions and the following disclaimer in the documentation
-# and/or other materials provided with the distribution.
-#
-# (3) Neither the name of the copyright holder nor the names of any contributors
-# may be used to endorse or promote products derived from this software without
-# specific prior written permission from the respective party.
-#
-# (4) Other than as required in clauses (1) and (2), distributions in any form
-# of modifications or other derivative works may not use the "OpenStudio"
-# trademark, "OS", "os", or any other confusingly similar designation without
-# specific prior written permission from Alliance for Sustainable Energy, LLC.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) AND ANY CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
-# THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER(S), ANY CONTRIBUTORS, THE
-# UNITED STATES GOVERNMENT, OR THE UNITED STATES DEPARTMENT OF ENERGY, NOR ANY OF
-# THEIR EMPLOYEES, BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
-# OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-# *******************************************************************************
-
-# see the URL below for information on how to write OpenStudio measures
-# http://openstudio.nrel.gov/openstudio-measure-writing-guide
-
-# see the URL below for information on using life cycle cost objects in OpenStudio
-# http://openstudio.nrel.gov/openstudio-life-cycle-examples
-
-# see the URL below for access to C++ documentation on model objects (click on "model" in the main window to view model objects)
-# http://openstudio.nrel.gov/sites/openstudio.nrel.gov/files/nv_data/cpp_documentation_it/model/html/namespaces.html
-
-# start the measure
-class EnableDemandControlledVentilation < OpenStudio::Measure::ModelMeasure
-  # define the name that a user will see, this method may be deprecated as
-  # the display name in PAT comes from the name field in measure.xml
-  def name
-    return 'Enable Demand Controlled Ventilation'
-  end
-
-  # define the arguments that the user will input
-  def arguments(model)
-    args = OpenStudio::Measure::OSArgumentVector.new
-
-    # make choice argument economizer control type
-    choices = OpenStudio::StringVector.new
-    choices << 'EnableDCV'
-    choices << 'DisableDCV'
-    choices << 'NoChange'
-    dcv_type = OpenStudio::Measure::OSArgument.makeChoiceArgument('dcv_type', choices, true)
-    dcv_type.setDisplayName('DCV Type')
-    args << dcv_type
-
-    return args
-  end
-
-  # define what happens when the measure is cop
-  def run(model, runner, user_arguments)
-    super(model, runner, user_arguments)
-
-    # use the built-in error checking
-    if !runner.validateUserArguments(arguments(model), user_arguments)
-      return false
-    end
-
-    # assign the user inputs to variables
-    dcv_type = runner.getStringArgumentValue('dcv_type', user_arguments)
-
-    # Note if dcv_type == NoChange
-    # and register as N/A
-    if dcv_type == 'NoChange'
-      runner.registerAsNotApplicable('N/A - User requested No Change in economizer operation.')
-      return true
-    end
-
-    # short def to make numbers pretty (converts 4125001.25641 to 4,125,001.26 or 4,125,001). The definition be called through this measure
-    def neat_numbers(number, roundto = 2) # round to 0 or 2)
-      if roundto == 2
-        number = format '%.2f', number
-      else
-        number = number.round
-      end
-      # regex to add commas
-      number.to_s.reverse.gsub(/([0-9]{3}(?=([0-9])))/, '\\1,').reverse
-    end
-
-    # info for initial condition
-    air_loops_changed = []
-
-    # loop through air loops
-    model.getAirLoopHVACs.each do |air_loop|
-      # find AirLoopHVACOutdoorAirSystem on loop
-      air_loop.supplyComponents.each do |supply_component|
-        hVACComponent = supply_component.to_AirLoopHVACOutdoorAirSystem
-        if !hVACComponent.empty?
-          hVACComponent = hVACComponent.get
-
-          # get ControllerOutdoorAir
-          controller_oa = hVACComponent.getControllerOutdoorAir
-
-          # get ControllerMechanicalVentilation
-          controller_mv = controller_oa.controllerMechanicalVentilation
-
-          if dcv_type == 'EnableDCV'
-            # check if demand control is enabled, if not, then enable it
-            if controller_mv.demandControlledVentilation == true
-              runner.registerInfo("#{air_loop.name} already has DCV enabled.")
-            else
-              controller_mv.setDemandControlledVentilation(true)
-              runner.registerInfo("Enabling DCV for #{air_loop.name}.")
-              air_loops_changed << air_loop
-            end
-          elsif dcv_type == 'DisableDCV'
-            # check if demand control is disabled, if not, then disabled it
-            if controller_mv.demandControlledVentilation == false
-              runner.registerInfo("#{air_loop.name} already has DCV disabled.")
-            else
-              controller_mv.setDemandControlledVentilation(false)
-              runner.registerInfo("Disabling DCV for #{air_loop.name}.")
-              air_loops_changed << air_loop
-            end
-          end
-
-        end
-      end
-    end
-
-    # Report N/A if none of the air loops were changed
-    if air_loops_changed.empty?
-      runner.registerAsNotApplicable('No air loops had DCV enabled or disabled.')
-      return true
-    end
-
-    # Report final condition of model
-    runner.registerFinalCondition("#{air_loops_changed.size} air loops now have demand controlled ventilation enabled.")
-
-    return true
-  end
-end
-
-# this allows the measure to be use by the application
-EnableDemandControlledVentilation.new.registerWithApplication

data/lib/measures/Enable Demand Controlled Ventilation/tests/MediumOffice-90.1-2010-ASHRAE 169-2013-5A_dcv/measures/Enable Demand Controlled Ventilation/measure.xml

@@ -1,117 +0,0 @@
-<measure xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://bcl.nrel.gov/xsd/measures/version/1.0.xsd">
- <schema_version>3.0</schema_version>
- <name>enable_demand_controlled_ventilation</name>
- <uid>3ff4b412-8689-4b11-a588-935c621dc97d</uid>
- <version_id>c40cd373-fb86-47c8-91ab-c4506345ab99</version_id>
- <version_modified>20200316T215553Z</version_modified>
- <xml_checksum>ECE70A70</xml_checksum>
- <class_name>EnableDemandControlledVentilation</class_name>
- <display_name>Enable Demand Controlled Ventilation</display_name>
- <description>The facility currently does not have a demand controlled ventilation system or CO2 sensors in the air delivery system. Outside air is introduced and conditioned at a fixed rate based on the maximum design. Since the building occupancy fluctuates and is often less than the maximum design occupancy, it is being over-ventilated and consuming more energy than necessary. The building CO2 level is closely related to the occupancy. The typical outside CO2 level is relatively low concentration, around 400 to 500 ppm, and is used to dilute the higher indoor CO2 levels.
-Demand controlled ventilation could be implemented by deploying CO2 sensors located in each AHU return air duct and in densely occupied spaces, such as conference rooms. Implementation of this ECM will require:
--Rebalance the open/closed outside air dampers to a lower minimum ventilation rate.
--Program demand ventilation controls into each AHU, controlling modulating dampers in mixed air AHUs and VFDs in outside air units. Ventilation will be generally controlled from return air sensors, but will be increased as needed based on densely occupied space sensors.
--Commission the project.</description>
- <modeler_description>This measure enable demand controlled ventilation on all or a single air loops in the building. The measure will loop through the selected systems, go into the &quot;control&quot; tab for the air system and toggles the &quot;Demand Controlled Ventilation&quot; button to the &quot;on&quot; position.
-
-
-
-
-
-
-
-
-
-If the HVAC system does not have an air side system, or if the &quot;Demand Controlled Ventilation&quot; button is already in the &quot;on&quot; position, then the runner sends an info message to the user that the model was not changed.
-
-
-
-
-
-
-
-
-
-The cost arguments are user arguments that start with a default of $0.</modeler_description>
- <arguments>
-  <argument>
-   <name>dcv_type</name>
-   <display_name>DCV Type</display_name>
-   <type>Choice</type>
-   <required>true</required>
-   <model_dependent>false</model_dependent>
-   <choices>
-    <choice>
-     <value>EnableDCV</value>
-     <display_name>EnableDCV</display_name>
-    </choice>
-    <choice>
-     <value>DisableDCV</value>
-     <display_name>DisableDCV</display_name>
-    </choice>
-    <choice>
-     <value>NoChange</value>
-     <display_name>NoChange</display_name>
-    </choice>
-   </choices>
-  </argument>
- </arguments>
- <tags>
-  <tag>HVAC.Ventilation</tag>
- </tags>
- <attributes>
-  <attribute>
-   <name>Measure Type</name>
-   <value>ModelMeasure</value>
-   <datatype>string</datatype>
-  </attribute>
-  <attribute>
-   <name>Uses SketchUp API</name>
-   <value>false</value>
-   <datatype>boolean</datatype>
-  </attribute>
- </attributes>
- <files>
-  <file>
-   <filename>0320_ModelWithHVAC_01.osm</filename>
-   <filetype>osm</filetype>
-   <usage_type>test</usage_type>
-   <checksum>049F3417</checksum>
-  </file>
-  <file>
-   <filename>README.md.erb</filename>
-   <filetype>erb</filetype>
-   <usage_type>readmeerb</usage_type>
-   <checksum>703C9964</checksum>
-  </file>
-  <file>
-   <filename>README.md</filename>
-   <filetype>md</filetype>
-   <usage_type>readme</usage_type>
-   <checksum>F6CB5CF3</checksum>
-  </file>
-  <file>
-   <filename>LICENSE.md</filename>
-   <filetype>md</filetype>
-   <usage_type>license</usage_type>
-   <checksum>E0468DD6</checksum>
-  </file>
-  <file>
-   <version>
-    <software_program>OpenStudio</software_program>
-    <identifier>2.0.0</identifier>
-    <min_compatible>2.0.0</min_compatible>
-   </version>
-   <filename>measure.rb</filename>
-   <filetype>rb</filetype>
-   <usage_type>script</usage_type>
-   <checksum>D051868A</checksum>
-  </file>
-  <file>
-   <filename>EnableDemandControlledVentilation_Test.rb</filename>
-   <filetype>rb</filetype>
-   <usage_type>test</usage_type>
-   <checksum>12A588F9</checksum>
-  </file>
- </files>
-</measure>