openstudio-geb 0.0.1 → 0.0.2

data/lib/measures/Enable Demand Controlled Ventilation/tests/MediumOffice-90.1-2010-ASHRAE 169-2013-5A_dcv/run/eplusout.end

@@ -1 +0,0 @@
-EnergyPlus Completed Successfully-- 202 Warning; 0 Severe Errors; Elapsed Time=00hr 00min 54.30sec

data/lib/measures/Enable Demand Controlled Ventilation/tests/MediumOffice-90.1-2010-ASHRAE 169-2013-5A_dcv/run/eplusout.err

@@ -1,331 +0,0 @@
-Program Version,EnergyPlus, Version 9.4.0-998c4b761e, YMD=2021.07.19 13:49,
-   ************* Beginning Zone Sizing Calculations
-   ** Warning ** Weather file location will be used rather than entered (IDF) Location object.
-   **   ~~~   ** ..Location object=BUFFALO NIAGARA INTL AP_NY_USA
-   **   ~~~   ** ..Weather File Location=Chicago Ohare Intl Ap IL USA TMY3 WMO#=725300
-   **   ~~~   ** ..due to location differences, Latitude difference=[0.95] degrees, Longitude difference=[9.19] degrees.
-   **   ~~~   ** ..Time Zone difference=[1.0] hour(s), Elevation difference=[6.51] percent, [14.00] meters.
-   ** Warning ** ProcessScheduleInput: Schedule:Day:Interval="ECONOMIZER MAX OA FRACTION 70 PCT DEFAULT", Blank Schedule Type Limits Name input -- will not be validated.
-   ** Warning ** ProcessScheduleInput: Schedule:Day:Interval="OFFICEMEDIUM HVACOPERATIONSCHD DEFAULT", Blank Schedule Type Limits Name input -- will not be validated.
-   ** Warning ** ProcessScheduleInput: Schedule:Day:Interval="OFFICEMEDIUM HVACOPERATIONSCHD SMRDSN|WKDY DAY", Blank Schedule Type Limits Name input -- will not be validated.
-   ** Warning ** ProcessScheduleInput: Schedule:Day:Interval="OFFICEMEDIUM HVACOPERATIONSCHD SUMMER DESIGN DAY", Blank Schedule Type Limits Name input -- will not be validated.
-   ** Warning ** ProcessScheduleInput: Schedule:Day:Interval="OFFICEMEDIUM HVACOPERATIONSCHD WINTER DESIGN DAY", Blank Schedule Type Limits Name input -- will not be validated.
-   ** Warning ** ProcessScheduleInput: Schedule:Day:Interval="OFFICEMEDIUM HVACOPERATIONSCHD WNTRDSN|SAT DAY", Blank Schedule Type Limits Name input -- will not be validated.
-   ** Warning ** ProcessScheduleInput: Schedule:Year="OFFICEMEDIUM HVACOPERATIONSCHD", Blank Schedule Type Limits Name input -- will not be validated.
-   ** Warning ** ProcessScheduleInput: Schedule:Constant="ALWAYS OFF DISCRETE", Blank Schedule Type Limits Name input -- will not be validated.
-   ** Warning ** ProcessScheduleInput: Schedule:Constant="ALWAYS ON CONTINUOUS", Blank Schedule Type Limits Name input -- will not be validated.
-   ** Warning ** CheckUsedConstructions: There are 9 nominally unused constructions in input.
-   **   ~~~   ** For explicit details on each unused construction, use Output:Diagnostics,DisplayExtraWarnings;
-   ** Warning ** GetInternalHeatGains: People="OFFICE WHOLEBUILDING - MD OFFICE PEOPLE" has comfort related schedules but no thermal comfort model selected.
-   **   ~~~   ** If schedules are specified for air velocity, clothing insulation, and/or work efficiency but no thermal comfort
-   **   ~~~   ** thermal comfort model is selected, the schedules will be listed as unused schedules in the .err file.
-   **   ~~~   ** To avoid these errors, select a valid thermal comfort model or eliminate these schedules in the PEOPLE input.
-   ** Warning ** GetInternalHeatGains: People="OFFICE WHOLEBUILDING - MD OFFICE PEOPLE" has comfort related schedules but no thermal comfort model selected.
-   **   ~~~   ** If schedules are specified for air velocity, clothing insulation, and/or work efficiency but no thermal comfort
-   **   ~~~   ** thermal comfort model is selected, the schedules will be listed as unused schedules in the .err file.
-   **   ~~~   ** To avoid these errors, select a valid thermal comfort model or eliminate these schedules in the PEOPLE input.
-   ** Warning ** GetInternalHeatGains: People="OFFICE WHOLEBUILDING - MD OFFICE PEOPLE" has comfort related schedules but no thermal comfort model selected.
-   **   ~~~   ** If schedules are specified for air velocity, clothing insulation, and/or work efficiency but no thermal comfort
-   **   ~~~   ** thermal comfort model is selected, the schedules will be listed as unused schedules in the .err file.
-   **   ~~~   ** To avoid these errors, select a valid thermal comfort model or eliminate these schedules in the PEOPLE input.
-   ** Warning ** GetInternalHeatGains: People="OFFICE WHOLEBUILDING - MD OFFICE PEOPLE" has comfort related schedules but no thermal comfort model selected.
-   **   ~~~   ** If schedules are specified for air velocity, clothing insulation, and/or work efficiency but no thermal comfort
-   **   ~~~   ** thermal comfort model is selected, the schedules will be listed as unused schedules in the .err file.
-   **   ~~~   ** To avoid these errors, select a valid thermal comfort model or eliminate these schedules in the PEOPLE input.
-   ** Warning ** GetInternalHeatGains: People="OFFICE WHOLEBUILDING - MD OFFICE PEOPLE" has comfort related schedules but no thermal comfort model selected.
-   **   ~~~   ** If schedules are specified for air velocity, clothing insulation, and/or work efficiency but no thermal comfort
-   **   ~~~   ** thermal comfort model is selected, the schedules will be listed as unused schedules in the .err file.
-   **   ~~~   ** To avoid these errors, select a valid thermal comfort model or eliminate these schedules in the PEOPLE input.
-   ** Warning ** GetInternalHeatGains: People="OFFICE WHOLEBUILDING - MD OFFICE PEOPLE" has comfort related schedules but no thermal comfort model selected.
-   **   ~~~   ** If schedules are specified for air velocity, clothing insulation, and/or work efficiency but no thermal comfort
-   **   ~~~   ** thermal comfort model is selected, the schedules will be listed as unused schedules in the .err file.
-   **   ~~~   ** To avoid these errors, select a valid thermal comfort model or eliminate these schedules in the PEOPLE input.
-   ** Warning ** GetInternalHeatGains: People="OFFICE WHOLEBUILDING - MD OFFICE PEOPLE" has comfort related schedules but no thermal comfort model selected.
-   **   ~~~   ** If schedules are specified for air velocity, clothing insulation, and/or work efficiency but no thermal comfort
-   **   ~~~   ** thermal comfort model is selected, the schedules will be listed as unused schedules in the .err file.
-   **   ~~~   ** To avoid these errors, select a valid thermal comfort model or eliminate these schedules in the PEOPLE input.
-   ** Warning ** GetInternalHeatGains: People="OFFICE WHOLEBUILDING - MD OFFICE PEOPLE" has comfort related schedules but no thermal comfort model selected.
-   **   ~~~   ** If schedules are specified for air velocity, clothing insulation, and/or work efficiency but no thermal comfort
-   **   ~~~   ** thermal comfort model is selected, the schedules will be listed as unused schedules in the .err file.
-   **   ~~~   ** To avoid these errors, select a valid thermal comfort model or eliminate these schedules in the PEOPLE input.
-   ** Warning ** GetInternalHeatGains: People="OFFICE WHOLEBUILDING - MD OFFICE PEOPLE" has comfort related schedules but no thermal comfort model selected.
-   **   ~~~   ** If schedules are specified for air velocity, clothing insulation, and/or work efficiency but no thermal comfort
-   **   ~~~   ** thermal comfort model is selected, the schedules will be listed as unused schedules in the .err file.
-   **   ~~~   ** To avoid these errors, select a valid thermal comfort model or eliminate these schedules in the PEOPLE input.
-   ** Warning ** GetInternalHeatGains: People="OFFICE WHOLEBUILDING - MD OFFICE PEOPLE" has comfort related schedules but no thermal comfort model selected.
-   **   ~~~   ** If schedules are specified for air velocity, clothing insulation, and/or work efficiency but no thermal comfort
-   **   ~~~   ** thermal comfort model is selected, the schedules will be listed as unused schedules in the .err file.
-   **   ~~~   ** To avoid these errors, select a valid thermal comfort model or eliminate these schedules in the PEOPLE input.
-   ** Warning ** GetInternalHeatGains: People="OFFICE WHOLEBUILDING - MD OFFICE PEOPLE" has comfort related schedules but no thermal comfort model selected.
-   **   ~~~   ** If schedules are specified for air velocity, clothing insulation, and/or work efficiency but no thermal comfort
-   **   ~~~   ** thermal comfort model is selected, the schedules will be listed as unused schedules in the .err file.
-   **   ~~~   ** To avoid these errors, select a valid thermal comfort model or eliminate these schedules in the PEOPLE input.
-   ** Warning ** GetInternalHeatGains: People="OFFICE WHOLEBUILDING - MD OFFICE PEOPLE" has comfort related schedules but no thermal comfort model selected.
-   **   ~~~   ** If schedules are specified for air velocity, clothing insulation, and/or work efficiency but no thermal comfort
-   **   ~~~   ** thermal comfort model is selected, the schedules will be listed as unused schedules in the .err file.
-   **   ~~~   ** To avoid these errors, select a valid thermal comfort model or eliminate these schedules in the PEOPLE input.
-   ** Warning ** GetInternalHeatGains: People="OFFICE WHOLEBUILDING - MD OFFICE PEOPLE" has comfort related schedules but no thermal comfort model selected.
-   **   ~~~   ** If schedules are specified for air velocity, clothing insulation, and/or work efficiency but no thermal comfort
-   **   ~~~   ** thermal comfort model is selected, the schedules will be listed as unused schedules in the .err file.
-   **   ~~~   ** To avoid these errors, select a valid thermal comfort model or eliminate these schedules in the PEOPLE input.
-   ** Warning ** GetInternalHeatGains: People="OFFICE WHOLEBUILDING - MD OFFICE PEOPLE" has comfort related schedules but no thermal comfort model selected.
-   **   ~~~   ** If schedules are specified for air velocity, clothing insulation, and/or work efficiency but no thermal comfort
-   **   ~~~   ** thermal comfort model is selected, the schedules will be listed as unused schedules in the .err file.
-   **   ~~~   ** To avoid these errors, select a valid thermal comfort model or eliminate these schedules in the PEOPLE input.
-   ** Warning ** GetInternalHeatGains: People="OFFICE WHOLEBUILDING - MD OFFICE PEOPLE" has comfort related schedules but no thermal comfort model selected.
-   **   ~~~   ** If schedules are specified for air velocity, clothing insulation, and/or work efficiency but no thermal comfort
-   **   ~~~   ** thermal comfort model is selected, the schedules will be listed as unused schedules in the .err file.
-   **   ~~~   ** To avoid these errors, select a valid thermal comfort model or eliminate these schedules in the PEOPLE input.
-   ** Warning ** Seems like you already tried to get a Handle on this Actuator 1times.
-   **   ~~~   ** Occurred for componentType='SCHEDULE:YEAR', controlType='SCHEDULE VALUE', uniqueKey='OFFICEMEDIUM CLGSETP_SCH_NO_SETBACK'.
-   **   ~~~   ** You should take note that there is a risk of overwritting.
-   ** Warning ** Seems like you already tried to get a Handle on this Actuator 1times.
-   **   ~~~   ** Occurred for componentType='SCHEDULE:YEAR', controlType='SCHEDULE VALUE', uniqueKey='OFFICEMEDIUM HTGSETP_SCH_PACU_VAV_BOT'.
-   **   ~~~   ** You should take note that there is a risk of overwritting.
-   ** Warning ** Seems like you already tried to get a Handle on this Actuator 2times.
-   **   ~~~   ** Occurred for componentType='SCHEDULE:YEAR', controlType='SCHEDULE VALUE', uniqueKey='OFFICEMEDIUM CLGSETP_SCH_NO_SETBACK'.
-   **   ~~~   ** You should take note that there is a risk of overwritting.
-   ** Warning ** Seems like you already tried to get a Handle on this Actuator 2times.
-   **   ~~~   ** Occurred for componentType='SCHEDULE:YEAR', controlType='SCHEDULE VALUE', uniqueKey='OFFICEMEDIUM HTGSETP_SCH_PACU_VAV_BOT'.
-   **   ~~~   ** You should take note that there is a risk of overwritting.
-   ** Warning ** GetDaylightingControls: Fraction of Zone controlled by the Daylighting reference points is < 1.0.
-   **   ~~~   ** ..discovered in "Daylighting:Controls" for Zone="PERIMETER_BOT_ZN_1 ZN", only 0.540 of the zone is controlled.
-   ** Warning ** GetDaylightingControls: Fraction of Zone controlled by the Daylighting reference points is < 1.0.
-   **   ~~~   ** ..discovered in "Daylighting:Controls" for Zone="PERIMETER_BOT_ZN_2 ZN", only 0.550 of the zone is controlled.
-   ** Warning ** GetDaylightingControls: Fraction of Zone controlled by the Daylighting reference points is < 1.0.
-   **   ~~~   ** ..discovered in "Daylighting:Controls" for Zone="PERIMETER_BOT_ZN_3 ZN", only 0.540 of the zone is controlled.
-   ** Warning ** GetDaylightingControls: Fraction of Zone controlled by the Daylighting reference points is < 1.0.
-   **   ~~~   ** ..discovered in "Daylighting:Controls" for Zone="PERIMETER_BOT_ZN_4 ZN", only 0.550 of the zone is controlled.
-   ** Warning ** GetDaylightingControls: Fraction of Zone controlled by the Daylighting reference points is < 1.0.
-   **   ~~~   ** ..discovered in "Daylighting:Controls" for Zone="PERIMETER_MID_ZN_1 ZN", only 0.540 of the zone is controlled.
-   ** Warning ** GetDaylightingControls: Fraction of Zone controlled by the Daylighting reference points is < 1.0.
-   **   ~~~   ** ..discovered in "Daylighting:Controls" for Zone="PERIMETER_MID_ZN_2 ZN", only 0.550 of the zone is controlled.
-   ** Warning ** GetDaylightingControls: Fraction of Zone controlled by the Daylighting reference points is < 1.0.
-   **   ~~~   ** ..discovered in "Daylighting:Controls" for Zone="PERIMETER_MID_ZN_3 ZN", only 0.540 of the zone is controlled.
-   ** Warning ** GetDaylightingControls: Fraction of Zone controlled by the Daylighting reference points is < 1.0.
-   **   ~~~   ** ..discovered in "Daylighting:Controls" for Zone="PERIMETER_MID_ZN_4 ZN", only 0.550 of the zone is controlled.
-   ** Warning ** GetDaylightingControls: Fraction of Zone controlled by the Daylighting reference points is < 1.0.
-   **   ~~~   ** ..discovered in "Daylighting:Controls" for Zone="PERIMETER_TOP_ZN_1 ZN", only 0.540 of the zone is controlled.
-   ** Warning ** GetDaylightingControls: Fraction of Zone controlled by the Daylighting reference points is < 1.0.
-   **   ~~~   ** ..discovered in "Daylighting:Controls" for Zone="PERIMETER_TOP_ZN_2 ZN", only 0.550 of the zone is controlled.
-   ** Warning ** GetDaylightingControls: Fraction of Zone controlled by the Daylighting reference points is < 1.0.
-   **   ~~~   ** ..discovered in "Daylighting:Controls" for Zone="PERIMETER_TOP_ZN_3 ZN", only 0.540 of the zone is controlled.
-   ** Warning ** GetDaylightingControls: Fraction of Zone controlled by the Daylighting reference points is < 1.0.
-   **   ~~~   ** ..discovered in "Daylighting:Controls" for Zone="PERIMETER_TOP_ZN_4 ZN", only 0.550 of the zone is controlled.
-   ************* Beginning System Sizing Calculations
-   ** Warning ** Since Zone Minimum Air Flow Input Method = CONSTANT, input for Fixed Minimum Air Flow Rate will be ignored.
-   **   ~~~   ** Occurs in AirTerminal:SingleDuct:VAV:Reheat = CORE_BOTTOM ZN VAV TERMINAL
-   ** Warning ** Since Zone Minimum Air Flow Input Method = CONSTANT, input for Fixed Minimum Air Flow Rate will be ignored.
-   **   ~~~   ** Occurs in AirTerminal:SingleDuct:VAV:Reheat = CORE_MID ZN VAV TERMINAL
-   ** Warning ** Since Zone Minimum Air Flow Input Method = CONSTANT, input for Fixed Minimum Air Flow Rate will be ignored.
-   **   ~~~   ** Occurs in AirTerminal:SingleDuct:VAV:Reheat = CORE_TOP ZN VAV TERMINAL
-   ** Warning ** Since Zone Minimum Air Flow Input Method = CONSTANT, input for Fixed Minimum Air Flow Rate will be ignored.
-   **   ~~~   ** Occurs in AirTerminal:SingleDuct:VAV:Reheat = PERIMETER_BOT_ZN_1 ZN VAV TERMINAL
-   ** Warning ** Since Zone Minimum Air Flow Input Method = CONSTANT, input for Fixed Minimum Air Flow Rate will be ignored.
-   **   ~~~   ** Occurs in AirTerminal:SingleDuct:VAV:Reheat = PERIMETER_BOT_ZN_2 ZN VAV TERMINAL
-   ** Warning ** Since Zone Minimum Air Flow Input Method = CONSTANT, input for Fixed Minimum Air Flow Rate will be ignored.
-   **   ~~~   ** Occurs in AirTerminal:SingleDuct:VAV:Reheat = PERIMETER_BOT_ZN_3 ZN VAV TERMINAL
-   ** Warning ** Since Zone Minimum Air Flow Input Method = CONSTANT, input for Fixed Minimum Air Flow Rate will be ignored.
-   **   ~~~   ** Occurs in AirTerminal:SingleDuct:VAV:Reheat = PERIMETER_BOT_ZN_4 ZN VAV TERMINAL
-   ** Warning ** Since Zone Minimum Air Flow Input Method = CONSTANT, input for Fixed Minimum Air Flow Rate will be ignored.
-   **   ~~~   ** Occurs in AirTerminal:SingleDuct:VAV:Reheat = PERIMETER_MID_ZN_1 ZN VAV TERMINAL
-   ** Warning ** Since Zone Minimum Air Flow Input Method = CONSTANT, input for Fixed Minimum Air Flow Rate will be ignored.
-   **   ~~~   ** Occurs in AirTerminal:SingleDuct:VAV:Reheat = PERIMETER_MID_ZN_2 ZN VAV TERMINAL
-   ** Warning ** Since Zone Minimum Air Flow Input Method = CONSTANT, input for Fixed Minimum Air Flow Rate will be ignored.
-   **   ~~~   ** Occurs in AirTerminal:SingleDuct:VAV:Reheat = PERIMETER_MID_ZN_3 ZN VAV TERMINAL
-   ** Warning ** Since Zone Minimum Air Flow Input Method = CONSTANT, input for Fixed Minimum Air Flow Rate will be ignored.
-   **   ~~~   ** Occurs in AirTerminal:SingleDuct:VAV:Reheat = PERIMETER_MID_ZN_4 ZN VAV TERMINAL
-   ** Warning ** Since Zone Minimum Air Flow Input Method = CONSTANT, input for Fixed Minimum Air Flow Rate will be ignored.
-   **   ~~~   ** Occurs in AirTerminal:SingleDuct:VAV:Reheat = PERIMETER_TOP_ZN_1 ZN VAV TERMINAL
-   ** Warning ** Since Zone Minimum Air Flow Input Method = CONSTANT, input for Fixed Minimum Air Flow Rate will be ignored.
-   **   ~~~   ** Occurs in AirTerminal:SingleDuct:VAV:Reheat = PERIMETER_TOP_ZN_2 ZN VAV TERMINAL
-   ** Warning ** Since Zone Minimum Air Flow Input Method = CONSTANT, input for Fixed Minimum Air Flow Rate will be ignored.
-   **   ~~~   ** Occurs in AirTerminal:SingleDuct:VAV:Reheat = PERIMETER_TOP_ZN_3 ZN VAV TERMINAL
-   ** Warning ** Since Zone Minimum Air Flow Input Method = CONSTANT, input for Fixed Minimum Air Flow Rate will be ignored.
-   **   ~~~   ** Occurs in AirTerminal:SingleDuct:VAV:Reheat = PERIMETER_TOP_ZN_4 ZN VAV TERMINAL
-   ************* Beginning Plant Sizing Calculations
-   ** Warning ** GetOAControllerInputs: Controller:MechanicalVentilation="5 ZONE PVAV VENTILATION CONTROLLER
-   **   ~~~   ** Cannot locate a matching DesignSpecification:ZoneAirDistribution object for Zone="CORE_BOTTOM ZN".
-   **   ~~~   ** Using default zone air distribution effectiveness of 1.0 for heating and cooling.
-   ** Warning ** GetOAControllerInputs: Controller:MechanicalVentilation="5 ZONE PVAV VENTILATION CONTROLLER
-   **   ~~~   ** Cannot locate a matching DesignSpecification:ZoneAirDistribution object for Zone="PERIMETER_BOT_ZN_1 ZN".
-   **   ~~~   ** Using default zone air distribution effectiveness of 1.0 for heating and cooling.
-   ** Warning ** GetOAControllerInputs: Controller:MechanicalVentilation="5 ZONE PVAV VENTILATION CONTROLLER
-   **   ~~~   ** Cannot locate a matching DesignSpecification:ZoneAirDistribution object for Zone="PERIMETER_BOT_ZN_2 ZN".
-   **   ~~~   ** Using default zone air distribution effectiveness of 1.0 for heating and cooling.
-   ** Warning ** GetOAControllerInputs: Controller:MechanicalVentilation="5 ZONE PVAV VENTILATION CONTROLLER
-   **   ~~~   ** Cannot locate a matching DesignSpecification:ZoneAirDistribution object for Zone="PERIMETER_BOT_ZN_3 ZN".
-   **   ~~~   ** Using default zone air distribution effectiveness of 1.0 for heating and cooling.
-   ** Warning ** GetOAControllerInputs: Controller:MechanicalVentilation="5 ZONE PVAV VENTILATION CONTROLLER
-   **   ~~~   ** Cannot locate a matching DesignSpecification:ZoneAirDistribution object for Zone="PERIMETER_BOT_ZN_4 ZN".
-   **   ~~~   ** Using default zone air distribution effectiveness of 1.0 for heating and cooling.
-   ** Warning ** GetOAControllerInputs: Controller:MechanicalVentilation="5 ZONE PVAV 1 VENTILATION CONTROLLER
-   **   ~~~   ** Cannot locate a matching DesignSpecification:ZoneAirDistribution object for Zone="CORE_MID ZN".
-   **   ~~~   ** Using default zone air distribution effectiveness of 1.0 for heating and cooling.
-   ** Warning ** GetOAControllerInputs: Controller:MechanicalVentilation="5 ZONE PVAV 1 VENTILATION CONTROLLER
-   **   ~~~   ** Cannot locate a matching DesignSpecification:ZoneAirDistribution object for Zone="PERIMETER_MID_ZN_1 ZN".
-   **   ~~~   ** Using default zone air distribution effectiveness of 1.0 for heating and cooling.
-   ** Warning ** GetOAControllerInputs: Controller:MechanicalVentilation="5 ZONE PVAV 1 VENTILATION CONTROLLER
-   **   ~~~   ** Cannot locate a matching DesignSpecification:ZoneAirDistribution object for Zone="PERIMETER_MID_ZN_2 ZN".
-   **   ~~~   ** Using default zone air distribution effectiveness of 1.0 for heating and cooling.
-   ** Warning ** GetOAControllerInputs: Controller:MechanicalVentilation="5 ZONE PVAV 1 VENTILATION CONTROLLER
-   **   ~~~   ** Cannot locate a matching DesignSpecification:ZoneAirDistribution object for Zone="PERIMETER_MID_ZN_3 ZN".
-   **   ~~~   ** Using default zone air distribution effectiveness of 1.0 for heating and cooling.
-   ** Warning ** GetOAControllerInputs: Controller:MechanicalVentilation="5 ZONE PVAV 1 VENTILATION CONTROLLER
-   **   ~~~   ** Cannot locate a matching DesignSpecification:ZoneAirDistribution object for Zone="PERIMETER_MID_ZN_4 ZN".
-   **   ~~~   ** Using default zone air distribution effectiveness of 1.0 for heating and cooling.
-   ** Warning ** GetOAControllerInputs: Controller:MechanicalVentilation="5 ZONE PVAV 2 VENTILATION CONTROLLER
-   **   ~~~   ** Cannot locate a matching DesignSpecification:ZoneAirDistribution object for Zone="CORE_TOP ZN".
-   **   ~~~   ** Using default zone air distribution effectiveness of 1.0 for heating and cooling.
-   ** Warning ** GetOAControllerInputs: Controller:MechanicalVentilation="5 ZONE PVAV 2 VENTILATION CONTROLLER
-   **   ~~~   ** Cannot locate a matching DesignSpecification:ZoneAirDistribution object for Zone="PERIMETER_TOP_ZN_1 ZN".
-   **   ~~~   ** Using default zone air distribution effectiveness of 1.0 for heating and cooling.
-   ** Warning ** GetOAControllerInputs: Controller:MechanicalVentilation="5 ZONE PVAV 2 VENTILATION CONTROLLER
-   **   ~~~   ** Cannot locate a matching DesignSpecification:ZoneAirDistribution object for Zone="PERIMETER_TOP_ZN_2 ZN".
-   **   ~~~   ** Using default zone air distribution effectiveness of 1.0 for heating and cooling.
-   ** Warning ** GetOAControllerInputs: Controller:MechanicalVentilation="5 ZONE PVAV 2 VENTILATION CONTROLLER
-   **   ~~~   ** Cannot locate a matching DesignSpecification:ZoneAirDistribution object for Zone="PERIMETER_TOP_ZN_3 ZN".
-   **   ~~~   ** Using default zone air distribution effectiveness of 1.0 for heating and cooling.
-   ** Warning ** GetOAControllerInputs: Controller:MechanicalVentilation="5 ZONE PVAV 2 VENTILATION CONTROLLER
-   **   ~~~   ** Cannot locate a matching DesignSpecification:ZoneAirDistribution object for Zone="PERIMETER_TOP_ZN_4 ZN".
-   **   ~~~   ** Using default zone air distribution effectiveness of 1.0 for heating and cooling.
-   ** Warning ** Controller:MechanicalVentilation="5 ZONE PVAV VENTILATION CONTROLLER", Zone OA/person rate
-   **   ~~~   ** For Zone="CORE_BOTTOM ZN".
-   **   ~~~   ** Zone outside air per person rate not set in Design Specification Outdoor Air Object="OFFICE WHOLEBUILDING - MD OFFICE VENTILATION".
-   ** Warning ** Controller:MechanicalVentilation="5 ZONE PVAV VENTILATION CONTROLLER", Zone OA/person rate
-   **   ~~~   ** For Zone="PERIMETER_BOT_ZN_1 ZN".
-   **   ~~~   ** Zone outside air per person rate not set in Design Specification Outdoor Air Object="OFFICE WHOLEBUILDING - MD OFFICE VENTILATION".
-   ** Warning ** Controller:MechanicalVentilation="5 ZONE PVAV VENTILATION CONTROLLER", Zone OA/person rate
-   **   ~~~   ** For Zone="PERIMETER_BOT_ZN_2 ZN".
-   **   ~~~   ** Zone outside air per person rate not set in Design Specification Outdoor Air Object="OFFICE WHOLEBUILDING - MD OFFICE VENTILATION".
-   ** Warning ** Controller:MechanicalVentilation="5 ZONE PVAV VENTILATION CONTROLLER", Zone OA/person rate
-   **   ~~~   ** For Zone="PERIMETER_BOT_ZN_3 ZN".
-   **   ~~~   ** Zone outside air per person rate not set in Design Specification Outdoor Air Object="OFFICE WHOLEBUILDING - MD OFFICE VENTILATION".
-   ** Warning ** Controller:MechanicalVentilation="5 ZONE PVAV VENTILATION CONTROLLER", Zone OA/person rate
-   **   ~~~   ** For Zone="PERIMETER_BOT_ZN_4 ZN".
-   **   ~~~   ** Zone outside air per person rate not set in Design Specification Outdoor Air Object="OFFICE WHOLEBUILDING - MD OFFICE VENTILATION".
-   ** Warning ** Controller:MechanicalVentilation="5 ZONE PVAV 1 VENTILATION CONTROLLER", Zone OA/person rate
-   **   ~~~   ** For Zone="CORE_MID ZN".
-   **   ~~~   ** Zone outside air per person rate not set in Design Specification Outdoor Air Object="OFFICE WHOLEBUILDING - MD OFFICE VENTILATION".
-   ** Warning ** Controller:MechanicalVentilation="5 ZONE PVAV 1 VENTILATION CONTROLLER", Zone OA/person rate
-   **   ~~~   ** For Zone="PERIMETER_MID_ZN_1 ZN".
-   **   ~~~   ** Zone outside air per person rate not set in Design Specification Outdoor Air Object="OFFICE WHOLEBUILDING - MD OFFICE VENTILATION".
-   ** Warning ** Controller:MechanicalVentilation="5 ZONE PVAV 1 VENTILATION CONTROLLER", Zone OA/person rate
-   **   ~~~   ** For Zone="PERIMETER_MID_ZN_2 ZN".
-   **   ~~~   ** Zone outside air per person rate not set in Design Specification Outdoor Air Object="OFFICE WHOLEBUILDING - MD OFFICE VENTILATION".
-   ** Warning ** Controller:MechanicalVentilation="5 ZONE PVAV 1 VENTILATION CONTROLLER", Zone OA/person rate
-   **   ~~~   ** For Zone="PERIMETER_MID_ZN_3 ZN".
-   **   ~~~   ** Zone outside air per person rate not set in Design Specification Outdoor Air Object="OFFICE WHOLEBUILDING - MD OFFICE VENTILATION".
-   ** Warning ** Controller:MechanicalVentilation="5 ZONE PVAV 1 VENTILATION CONTROLLER", Zone OA/person rate
-   **   ~~~   ** For Zone="PERIMETER_MID_ZN_4 ZN".
-   **   ~~~   ** Zone outside air per person rate not set in Design Specification Outdoor Air Object="OFFICE WHOLEBUILDING - MD OFFICE VENTILATION".
-   ** Warning ** Controller:MechanicalVentilation="5 ZONE PVAV 2 VENTILATION CONTROLLER", Zone OA/person rate
-   **   ~~~   ** For Zone="CORE_TOP ZN".
-   **   ~~~   ** Zone outside air per person rate not set in Design Specification Outdoor Air Object="OFFICE WHOLEBUILDING - MD OFFICE VENTILATION".
-   ** Warning ** Controller:MechanicalVentilation="5 ZONE PVAV 2 VENTILATION CONTROLLER", Zone OA/person rate
-   **   ~~~   ** For Zone="PERIMETER_TOP_ZN_1 ZN".
-   **   ~~~   ** Zone outside air per person rate not set in Design Specification Outdoor Air Object="OFFICE WHOLEBUILDING - MD OFFICE VENTILATION".
-   ** Warning ** Controller:MechanicalVentilation="5 ZONE PVAV 2 VENTILATION CONTROLLER", Zone OA/person rate
-   **   ~~~   ** For Zone="PERIMETER_TOP_ZN_2 ZN".
-   **   ~~~   ** Zone outside air per person rate not set in Design Specification Outdoor Air Object="OFFICE WHOLEBUILDING - MD OFFICE VENTILATION".
-   ** Warning ** Controller:MechanicalVentilation="5 ZONE PVAV 2 VENTILATION CONTROLLER", Zone OA/person rate
-   **   ~~~   ** For Zone="PERIMETER_TOP_ZN_3 ZN".
-   **   ~~~   ** Zone outside air per person rate not set in Design Specification Outdoor Air Object="OFFICE WHOLEBUILDING - MD OFFICE VENTILATION".
-   ** Warning ** Controller:MechanicalVentilation="5 ZONE PVAV 2 VENTILATION CONTROLLER", Zone OA/person rate
-   **   ~~~   ** For Zone="PERIMETER_TOP_ZN_4 ZN".
-   **   ~~~   ** Zone outside air per person rate not set in Design Specification Outdoor Air Object="OFFICE WHOLEBUILDING - MD OFFICE VENTILATION".
-   ** Warning ** Output:Meter: invalid Key Name="DISTRICTCOOLING:FACILITY" - not found.
-   ** Warning ** Output:Meter: invalid Key Name="DISTRICTHEATING:FACILITY" - not found.
-   ** Warning ** Output:Meter:MeterFileOnly requested for "Electricity:Facility" (TimeStep), already on "Output:Meter". Will report to both eplusout.eso and eplusout.mtr
-   ************* Testing Individual Branch Integrity
-   ************* All Branches passed integrity testing
-   ************* Testing Individual Supply Air Path Integrity
-   ************* All Supply Air Paths passed integrity testing
-   ************* Testing Individual Return Air Path Integrity
-   ************* All Return Air Paths passed integrity testing
-   ************* No node connection errors were found.
-   ************* Beginning Simulation
-   ** Warning ** SimHVAC: Maximum iterations (20) exceeded for all HVAC loops, at RUN PERIOD 1, 01/01 03:20 - 03:22
-   **   ~~~   ** The solution for one or more of the Air Loop HVAC systems did not appear to converge
-   **   ~~~   ** ...use Output:Diagnostics,DisplayExtraWarnings; to show more details on each max iteration exceeded.
-   ** Warning ** SimHVAC: Maximum iterations (20) exceeded for all HVAC loops, at RUN PERIOD 1, 01/01 04:00 - 04:03
-   **   ~~~   ** The solution for one or more of the Air Loop HVAC systems did not appear to converge
-   ** Warning ** SimHVAC: Maximum iterations (20) exceeded for all HVAC loops, at RUN PERIOD 1, 01/01 04:40 - 04:42
-   **   ~~~   ** The solution for one or more of the Air Loop HVAC systems did not appear to converge
-   ** Warning ** SimHVAC: Maximum iterations (20) exceeded for all HVAC loops, at RUN PERIOD 1, 01/01 05:25 - 05:27
-   **   ~~~   ** The solution for one or more of the Air Loop HVAC systems did not appear to converge
-   ** Warning ** SimHVAC: Maximum iterations (20) exceeded for all HVAC loops, at RUN PERIOD 1, 01/01 06:08 - 06:10
-   **   ~~~   ** The solution for one or more of the Air Loop HVAC systems did not appear to converge
-   ** Warning ** SimHVAC: Maximum iterations (20) exceeded for all HVAC loops, at RUN PERIOD 1, 01/01 06:50 - 07:00
-   **   ~~~   ** The solution for one or more of the Air Loop HVAC systems did not appear to converge
-   ** Warning ** SimHVAC: Maximum iterations (20) exceeded for all HVAC loops, at RUN PERIOD 1, 01/01 07:00 - 07:10
-   **   ~~~   ** The solution for one or more of the Air Loop HVAC systems did not appear to converge
-   ** Warning ** SimHVAC: Maximum iterations (20) exceeded for all HVAC loops, at RUN PERIOD 1, 01/01 07:40 - 07:50
-   **   ~~~   ** The solution for one or more of the Air Loop HVAC systems did not appear to converge
-   ** Warning ** SimHVAC: Maximum iterations (20) exceeded for all HVAC loops, at RUN PERIOD 1, 01/01 08:08 - 08:10
-   **   ~~~   ** The solution for one or more of the Air Loop HVAC systems did not appear to converge
-   ** Warning ** SimHVAC: Maximum iterations (20) exceeded for all HVAC loops, at RUN PERIOD 1, 01/01 08:48 - 08:50
-   **   ~~~   ** The solution for one or more of the Air Loop HVAC systems did not appear to converge
-   ** Warning ** SimHVAC: Maximum iterations (20) exceeded for all HVAC loops, at RUN PERIOD 1, 01/01 08:53 - 08:57
-   **   ~~~   ** The solution for one or more of the Air Loop HVAC systems did not appear to converge
-   ** Warning ** SimHVAC: Maximum iterations (20) exceeded for all HVAC loops, at RUN PERIOD 1, 01/01 09:28 - 09:30
-   **   ~~~   ** The solution for one or more of the Air Loop HVAC systems did not appear to converge
-   ** Warning ** SimHVAC: Maximum iterations (20) exceeded for all HVAC loops, at RUN PERIOD 1, 01/01 10:05 - 10:08
-   **   ~~~   ** The solution for one or more of the Air Loop HVAC systems did not appear to converge
-   ** Warning ** SimHVAC: Maximum iterations (20) exceeded for all HVAC loops, at RUN PERIOD 1, 01/07 00:20 - 00:25
-   **   ~~~   ** The solution for one or more of the Air Loop HVAC systems did not appear to converge
-   ** Warning ** WetBulb not converged after 101 iterations(PsyTwbFnTdbWPb)
-   **   ~~~   **  Routine=Unknown, Environment=RUN PERIOD 1, at Simulation time=02/06 08:04 - 08:05
-   **   ~~~   **  Input Temperature = 7.56
-   **   ~~~   **  Input Humidity Ratio= 7.591564E-004
-   **   ~~~   **  Input Pressure = 100416.62
-   **   ~~~   **  Resultant Temperature= 0.19
-   ** Warning ** Temperature out of range [-100. to 200.] (PsyPsatFnTemp)
-   **   ~~~   **  Routine=PsyTwbFnTdbWPb, Environment=RUN PERIOD 1, at Simulation time=03/06 12:40 - 12:50
-   **   ~~~   **  Input Temperature=-100.63
-   ** Warning ** The resource referenced by LifeCycleCost:UsePriceEscalation= "U.S. AVG  COMMERCIAL-ELECTRICITY" has no energy cost. 
-   **   ~~~   ** ... It is likely that the wrong resource is used. The resource should match the meter used in Utility:Tariff.
-   ** Warning ** The resource referenced by LifeCycleCost:UsePriceEscalation= "U.S. AVG  COMMERCIAL-DISTILLATE OIL" has no energy cost. 
-   **   ~~~   ** ... It is likely that the wrong resource is used. The resource should match the meter used in Utility:Tariff.
-   ** Warning ** The resource referenced by LifeCycleCost:UsePriceEscalation= "U.S. AVG  COMMERCIAL-RESIDUAL OIL" has no energy cost. 
-   **   ~~~   ** ... It is likely that the wrong resource is used. The resource should match the meter used in Utility:Tariff.
-   ** Warning ** The resource referenced by LifeCycleCost:UsePriceEscalation= "U.S. AVG  COMMERCIAL-NATURAL GAS" has no energy cost. 
-   **   ~~~   ** ... It is likely that the wrong resource is used. The resource should match the meter used in Utility:Tariff.
-   ** Warning ** The resource referenced by LifeCycleCost:UsePriceEscalation= "U.S. AVG  COMMERCIAL-COAL" has no energy cost. 
-   **   ~~~   ** ... It is likely that the wrong resource is used. The resource should match the meter used in Utility:Tariff.
-   ************* Simulation Error Summary *************
-   ************* There are 5 unused schedules in input.
-   ************* There are 5 unused week schedules in input.
-   ************* There are 12 unused day schedules in input.
-   ************* Use Output:Diagnostics,DisplayUnusedSchedules; to see them.
-   *************
-   ************* ===== Recurring Error Summary =====
-   ************* The following recurring error messages occurred.
-   *************
-   *************  ** Warning ** SimHVAC: Exceeding Maximum iterations for all HVAC loops, during RUN PERIOD 1 continues
-   *************  **   ~~~   **   This error occurred 87 total times;
-   *************  **   ~~~   **   during Warmup 0 times;
-   *************  **   ~~~   **   during Sizing 0 times.
-   *************
-   *************  ** Warning ** WetBulb not converged after max iterations(PsyTwbFnTdbWPb)
-   *************  **   ~~~   **   This error occurred 2 total times;
-   *************  **   ~~~   **   during Warmup 0 times;
-   *************  **   ~~~   **   during Sizing 0 times.
-   *************
-   *************  ** Warning ** Temperature out of range [-100. to 200.] (PsyPsatFnTemp)
-   *************  **   ~~~   **   This error occurred 4 total times;
-   *************  **   ~~~   **   during Warmup 0 times;
-   *************  **   ~~~   **   during Sizing 0 times.
-   *************  **   ~~~   **   Max=-100.631439 C  Min=-354.831406 C
-   *************
-   *************
-   ************* ===== Final Error Summary =====
-   ************* The following error categories occurred.  Consider correcting or noting.
-   ************* Nominally Unused Constructions
-   ************* ..The nominally unused constructions warning is provided to alert you to potential conditions that can cause
-   ************* ..extra time during simulation. Each construction is calculated by the algorithm indicated in the HeatBalanceAlgorithm
-   ************* ..object. You may remove the constructions indicated (when you use the DisplayExtraWarnings option).
-   *************
-   ************* EnergyPlus Warmup Error Summary. During Warmup: 0 Warning; 0 Severe Errors.
-   ************* EnergyPlus Sizing Error Summary. During Sizing: 57 Warning; 0 Severe Errors.
-   ************* EnergyPlus Completed Successfully-- 202 Warning; 0 Severe Errors; Elapsed Time=00hr 00min 54.30sec