openstudio-geb 0.0.1 → 0.0.2

data/lib/measures/Enable Demand Controlled Ventilation/tests/MediumOffice-90.1-2010-ASHRAE 169-2013-5A_dcv/run/results.json

@@ -1,6 +0,0 @@
-{
-  "Enable Demand Controlled Ventilation": {
-    "dcv_type": "EnableDCV",
-    "applicable": true
-  }
-}

data/lib/measures/Enable Demand Controlled Ventilation/tests/MediumOffice-90.1-2010-ASHRAE 169-2013-5A_dcv/run/sqlite.err

@@ -1 +0,0 @@
-SQLite3 message, sqlite.err open for processing!

data/lib/measures/Enable Demand Controlled Ventilation/tests/MediumOffice-90.1-2010-ASHRAE 169-2013-5A_dcv/run/started.job

@@ -1 +0,0 @@
-Started Workflow 2021-07-19 13:49:51 -0700

data/lib/measures/Enable Demand Controlled Ventilation/tests/MediumOffice-90.1-2010-ASHRAE 169-2013-5A_dcv/run/stdout-energyplus

@@ -1,271 +0,0 @@
-EnergyPlus Starting
-EnergyPlus, Version 9.4.0-998c4b761e, YMD=2021.07.19 13:49
-Initializing Response Factors
-Calculating CTFs for "INTERIORFURNISHINGS"
-Calculating CTFs for "PLENUM ACOUSTICAL TILE"
-Calculating CTFs for "TYPICAL IEAD ROOF R-20.83"
-Calculating CTFs for "TYPICAL INSULATED METAL DOOR R-1.43"
-Calculating CTFs for "TYPICAL INSULATED STEEL FRAMED EXTERIOR WALL R-15.63"
-Calculating CTFs for "TYPICAL INTERIOR CEILING"
-Calculating CTFs for "TYPICAL INTERIOR WALL"
-Calculating CTFs for "FOUNDATION F 126 PERIM 0 AREA 98354"
-Calculating CTFs for "FOUNDATION F 126 PERIM 3327 AREA 13125"
-Calculating CTFs for "FOUNDATION F 126 PERIM 3327 AREA 13126"
-Calculating CTFs for "FOUNDATION F 126 PERIM 4991 AREA 20734"
-Initializing Window Optical Properties
-Initializing Solar Calculations
-Allocate Solar Module Arrays
-Initializing Zone and Enclosure Report Variables
-Initializing Surface (Shading) Report Variables
-Determining Shadowing Combinations
-Computing Window Shade Absorption Factors
-Proceeding with Initializing Solar Calculations
-Initializing Surfaces
-Initializing Outdoor environment for Surfaces
-Setting up Surface Reporting Variables
-Initializing Temperature and Flux Histories
-Initializing Window Shading
-Computing Interior Absorption Factors
-Computing Interior Diffuse Solar Absorption Factors
-Initializing Solar Heat Gains
-Initializing Internal Heat Gains
-Initializing Interior Solar Distribution
-Initializing Interior Convection Coefficients
-Gathering Information for Predefined Reporting
-Completed Initializing Surface Heat Balance
-Calculate Outside Surface Heat Balance
-Calculate Inside Surface Heat Balance
-Calculate Air Heat Balance
-Initializing HVAC
-Warming up
-Calculating Detailed Daylighting Factors, Start Date=07/21
-Warming up
-Warming up
-Warming up
-Warming up
-Warming up
-Performing Zone Sizing Simulation
-...for Sizing Period: #1 BUFFALO.NIAGARA.INTL.AP_NY_USA ANN CLG .4% CONDNS DB=>MWB
-Warming up
-Calculating Detailed Daylighting Factors, Start Date=01/21
-Warming up
-Warming up
-Warming up
-Warming up
-Warming up
-Warming up
-Warming up
-Warming up
-Performing Zone Sizing Simulation
-...for Sizing Period: #2 BUFFALO.NIAGARA.INTL.AP_NY_USA ANN HTG 99.6% CONDNS DB
-Calculating System sizing
-...for Sizing Period: #1 BUFFALO.NIAGARA.INTL.AP_NY_USA ANN CLG .4% CONDNS DB=>MWB
-Calculating System sizing
-...for Sizing Period: #2 BUFFALO.NIAGARA.INTL.AP_NY_USA ANN HTG 99.6% CONDNS DB
-Adjusting Air System Sizing
-Adjusting Standard 62.1 Ventilation Sizing
-Initializing Simulation
-Reporting Surfaces
-Beginning HVAC Sizing Simulation
-Initializing New Environment Parameters, HVAC Sizing Simulation
-Warming up {1}
-Calculating Detailed Daylighting Factors, Start Date=07/21
-Warming up {2}
-Warming up {3}
-Warming up {4}
-Warming up {5}
-Warming up {6}
-Starting HVAC Sizing Simulation at 07/21 for BUFFALO.NIAGARA.INTL.AP_NY_USA ANN CLG .4% CONDNS DB=>MWB HVAC Sizing Pass 1
-Initializing New Environment Parameters, HVAC Sizing Simulation
-Warming up {1}
-Calculating Detailed Daylighting Factors, Start Date=01/21
-Warming up {2}
-Warming up {3}
-Warming up {4}
-Warming up {5}
-Warming up {6}
-Warming up {7}
-Warming up {8}
-Warming up {9}
-Warming up {10}
-Starting HVAC Sizing Simulation at 01/21 for BUFFALO.NIAGARA.INTL.AP_NY_USA ANN HTG 99.6% CONDNS DB HVAC Sizing Pass 1
-Beginning Primary Simulation
-Initializing New Environment Parameters
-Warming up {1}
-Calculating Detailed Daylighting Factors, Start Date=01/01
-Warming up {2}
-Warming up {3}
-Warming up {4}
-Warming up {5}
-Warming up {6}
-Warming up {7}
-Warming up {8}
-Warming up {9}
-Warming up {10}
-Warming up {11}
-Warming up {12}
-Warming up {13}
-Warming up {14}
-Warming up {15}
-Warming up {16}
-Starting Simulation at 01/01/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=01/08/2006
-Updating Detailed Daylighting Factors, Start Date=01/08
-Continuing Simulation at 01/08/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=01/15/2006
-Updating Detailed Daylighting Factors, Start Date=01/15
-Continuing Simulation at 01/15/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=01/22/2006
-Updating Detailed Daylighting Factors, Start Date=01/22
-Continuing Simulation at 01/22/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=01/29/2006
-Updating Detailed Daylighting Factors, Start Date=01/29
-Continuing Simulation at 01/29/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=02/05/2006
-Updating Detailed Daylighting Factors, Start Date=02/05
-Continuing Simulation at 02/05/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=02/12/2006
-Updating Detailed Daylighting Factors, Start Date=02/12
-Continuing Simulation at 02/12/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=02/19/2006
-Updating Detailed Daylighting Factors, Start Date=02/19
-Continuing Simulation at 02/19/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=02/26/2006
-Updating Detailed Daylighting Factors, Start Date=02/26
-Continuing Simulation at 02/26/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=03/05/2006
-Updating Detailed Daylighting Factors, Start Date=03/05
-Continuing Simulation at 03/05/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=03/12/2006
-Updating Detailed Daylighting Factors, Start Date=03/12
-Continuing Simulation at 03/12/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=03/19/2006
-Updating Detailed Daylighting Factors, Start Date=03/19
-Continuing Simulation at 03/19/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=03/26/2006
-Updating Detailed Daylighting Factors, Start Date=03/26
-Continuing Simulation at 03/26/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=04/02/2006
-Updating Detailed Daylighting Factors, Start Date=04/02
-Continuing Simulation at 04/02/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=04/09/2006
-Updating Detailed Daylighting Factors, Start Date=04/09
-Continuing Simulation at 04/09/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=04/16/2006
-Updating Detailed Daylighting Factors, Start Date=04/16
-Continuing Simulation at 04/16/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=04/23/2006
-Updating Detailed Daylighting Factors, Start Date=04/23
-Continuing Simulation at 04/23/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=04/30/2006
-Updating Detailed Daylighting Factors, Start Date=04/30
-Continuing Simulation at 04/30/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=05/07/2006
-Updating Detailed Daylighting Factors, Start Date=05/07
-Continuing Simulation at 05/07/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=05/14/2006
-Updating Detailed Daylighting Factors, Start Date=05/14
-Continuing Simulation at 05/14/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=05/21/2006
-Updating Detailed Daylighting Factors, Start Date=05/21
-Continuing Simulation at 05/21/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=05/28/2006
-Updating Detailed Daylighting Factors, Start Date=05/28
-Continuing Simulation at 05/28/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=06/04/2006
-Updating Detailed Daylighting Factors, Start Date=06/04
-Continuing Simulation at 06/04/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=06/11/2006
-Updating Detailed Daylighting Factors, Start Date=06/11
-Continuing Simulation at 06/11/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=06/18/2006
-Updating Detailed Daylighting Factors, Start Date=06/18
-Continuing Simulation at 06/18/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=06/25/2006
-Updating Detailed Daylighting Factors, Start Date=06/25
-Continuing Simulation at 06/25/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=07/02/2006
-Updating Detailed Daylighting Factors, Start Date=07/02
-Continuing Simulation at 07/02/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=07/09/2006
-Updating Detailed Daylighting Factors, Start Date=07/09
-Continuing Simulation at 07/09/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=07/16/2006
-Updating Detailed Daylighting Factors, Start Date=07/16
-Continuing Simulation at 07/16/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=07/23/2006
-Updating Detailed Daylighting Factors, Start Date=07/23
-Continuing Simulation at 07/23/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=07/30/2006
-Updating Detailed Daylighting Factors, Start Date=07/30
-Continuing Simulation at 07/30/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=08/06/2006
-Updating Detailed Daylighting Factors, Start Date=08/06
-Continuing Simulation at 08/06/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=08/13/2006
-Updating Detailed Daylighting Factors, Start Date=08/13
-Continuing Simulation at 08/13/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=08/20/2006
-Updating Detailed Daylighting Factors, Start Date=08/20
-Continuing Simulation at 08/20/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=08/27/2006
-Updating Detailed Daylighting Factors, Start Date=08/27
-Continuing Simulation at 08/27/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=09/03/2006
-Updating Detailed Daylighting Factors, Start Date=09/03
-Continuing Simulation at 09/03/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=09/10/2006
-Updating Detailed Daylighting Factors, Start Date=09/10
-Continuing Simulation at 09/10/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=09/17/2006
-Updating Detailed Daylighting Factors, Start Date=09/17
-Continuing Simulation at 09/17/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=09/24/2006
-Updating Detailed Daylighting Factors, Start Date=09/24
-Continuing Simulation at 09/24/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=10/01/2006
-Updating Detailed Daylighting Factors, Start Date=10/01
-Continuing Simulation at 10/01/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=10/08/2006
-Updating Detailed Daylighting Factors, Start Date=10/08
-Continuing Simulation at 10/08/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=10/15/2006
-Updating Detailed Daylighting Factors, Start Date=10/15
-Continuing Simulation at 10/15/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=10/22/2006
-Updating Detailed Daylighting Factors, Start Date=10/22
-Continuing Simulation at 10/22/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=10/29/2006
-Updating Detailed Daylighting Factors, Start Date=10/29
-Continuing Simulation at 10/29/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=11/05/2006
-Updating Detailed Daylighting Factors, Start Date=11/05
-Continuing Simulation at 11/05/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=11/12/2006
-Updating Detailed Daylighting Factors, Start Date=11/12
-Continuing Simulation at 11/12/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=11/19/2006
-Updating Detailed Daylighting Factors, Start Date=11/19
-Continuing Simulation at 11/19/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=11/26/2006
-Updating Detailed Daylighting Factors, Start Date=11/26
-Continuing Simulation at 11/26/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=12/03/2006
-Updating Detailed Daylighting Factors, Start Date=12/03
-Continuing Simulation at 12/03/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=12/10/2006
-Updating Detailed Daylighting Factors, Start Date=12/10
-Continuing Simulation at 12/10/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=12/17/2006
-Updating Detailed Daylighting Factors, Start Date=12/17
-Continuing Simulation at 12/17/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=12/24/2006
-Updating Detailed Daylighting Factors, Start Date=12/24
-Continuing Simulation at 12/24/2006 for RUN PERIOD 1
-Updating Shadowing Calculations, Start Date=12/31/2006
-Updating Detailed Daylighting Factors, Start Date=12/31
-Writing tabular output file results using HTML format.
-Computing Life Cycle Costs and Reporting
-Writing final SQL reports
-EnergyPlus Run Time=00hr 00min 54.30sec
-EnergyPlus Completed Successfully.

data/lib/measures/Enable Demand Controlled Ventilation/tests/MediumOffice-90.1-2010-ASHRAE 169-2013-5A_dcv/run/stdout-expandobject

@@ -1,3 +0,0 @@
-ExpandObjects Started.
-No expanded file generated.
-ExpandObjects Finished. Time:     0.078

data/lib/measures/Enable Demand Controlled Ventilation/tests/MediumOffice-90.1-2010-ASHRAE 169-2013-5A_dcv/workflow.osw

@@ -1,19 +0,0 @@
-{
-   "created_at" : "20210315T222147Z",
-   "seed_file" : "../MediumOffice-90.1-2010-ASHRAE 169-2013-5A_dcv.osm",
-   "steps" : 
-   [
-      {
-         "arguments" : 
-         {
-            "dcv_type" : "EnableDCV"
-         },
-         "description" : "The facility currently does not have a demand controlled ventilation system or CO2 sensors in the air delivery system. Outside air is introduced and conditioned at a fixed rate based on the maximum design. Since the building occupancy fluctuates and is often less than the maximum design occupancy, it is being over-ventilated and consuming more energy than necessary. The building CO2 level is closely related to the occupancy. The typical outside CO2 level is relatively low concentration, around 400 to 500 ppm, and is used to dilute the higher indoor CO2 levels.\nDemand controlled ventilation could be implemented by deploying CO2 sensors located in each AHU return air duct and in densely occupied spaces, such as conference rooms. Implementation of this ECM will require:\n-Rebalance the open/closed outside air dampers to a lower minimum ventilation rate.\n-Program demand ventilation controls into each AHU, controlling modulating dampers in mixed air AHUs and VFDs in outside air units. Ventilation will be generally controlled from return air sensors, but will be increased as needed based on densely occupied space sensors.\n-Commission the project.",
-         "measure_dir_name" : "Enable Demand Controlled Ventilation",
-         "modeler_description" : "This measure enable demand controlled ventilation on all or a single air loops in the building. The measure will loop through the selected systems, go into the \"control\" tab for the air system and toggles the \"Demand Controlled Ventilation\" button to the \"on\" position.\n\n\n\n\n\n\n\n\n\nIf the HVAC system does not have an air side system, or if the \"Demand Controlled Ventilation\" button is already in the \"on\" position, then the runner sends an info message to the user that the model was not changed.\n\n\n\n\n\n\n\n\n\nThe cost arguments are user arguments that start with a default of $0.",
-         "name" : "Enable Demand Controlled Ventilation"
-      }
-   ],
-   "updated_at" : "20210719T204931Z",
-   "weather_file" : "USA_IL_Chicago-OHare.Intl.AP.725300_TMY3.epw"
-}

data/lib/measures/add_rooftop_pv/README.md.erb

@@ -1,42 +0,0 @@
-<%#= README.md.erb is used to auto-generate README.md. %>
-<%#= To manually maintain README.md throw away README.md.erb and manually edit README.md %>
-###### (Automatically generated documentation)
-
-# <%= name %>
-
-## Description
-<%= description %>
-
-## Modeler Description
-<%= modelerDescription %>
-
-## Measure Type
-<%= measureType %>
-
-## Taxonomy
-<%= taxonomy %>
-
-## Arguments
-
-<% arguments.each do |argument| %>
-### <%= argument[:display_name] %>
-<%= argument[:description] %>
-**Name:** <%= argument[:name] %>,
-**Type:** <%= argument[:type] %>,
-**Units:** <%= argument[:units] %>,
-**Required:** <%= argument[:required] %>,
-**Model Dependent:** <%= argument[:model_dependent] %>
-<% end %>
-
-<% if arguments.size == 0 %>
-<%= "This measure does not have any user arguments" %>
-<% end %>
-
-<% if outputs.size > 0 %>
-## Outputs
-<% output_names = [] %>
-<% outputs.each do |output| %>
-<% output_names << output[:display_name] %>
-<% end %>
-<%= output_names.join(", ") %>
-<% end %>