libarchive-static 1.0.6 → 1.1.0

data/ext/libarchive-3.6.2/libarchive/archive_write_add_filter_bzip2.c

@@ -0,0 +1,401 @@
+/*-
+ * Copyright (c) 2003-2007 Tim Kientzle
+ * Copyright (c) 2012 Michihiro NAKAJIMA
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR(S) ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR(S) BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "archive_platform.h"
+
+__FBSDID("$FreeBSD: head/lib/libarchive/archive_write_set_compression_bzip2.c 201091 2009-12-28 02:22:41Z kientzle $");
+
+#ifdef HAVE_ERRNO_H
+#include <errno.h>
+#endif
+#include <stdio.h>
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+#ifdef HAVE_STRING_H
+#include <string.h>
+#endif
+#ifdef HAVE_BZLIB_H
+#include <bzlib.h>
+#endif
+
+#include "archive.h"
+#include "archive_private.h"
+#include "archive_write_private.h"
+
+#if ARCHIVE_VERSION_NUMBER < 4000000
+int
+archive_write_set_compression_bzip2(struct archive *a)
+{
+	__archive_write_filters_free(a);
+	return (archive_write_add_filter_bzip2(a));
+}
+#endif
+
+struct private_data {
+	int		 compression_level;
+#if defined(HAVE_BZLIB_H) && defined(BZ_CONFIG_ERROR)
+	bz_stream	 stream;
+	int64_t		 total_in;
+	char		*compressed;
+	size_t		 compressed_buffer_size;
+#else
+	struct archive_write_program_data *pdata;
+#endif
+};
+
+static int archive_compressor_bzip2_close(struct archive_write_filter *);
+static int archive_compressor_bzip2_free(struct archive_write_filter *);
+static int archive_compressor_bzip2_open(struct archive_write_filter *);
+static int archive_compressor_bzip2_options(struct archive_write_filter *,
+		    const char *, const char *);
+static int archive_compressor_bzip2_write(struct archive_write_filter *,
+		    const void *, size_t);
+
+/*
+ * Add a bzip2 compression filter to this write handle.
+ */
+int
+archive_write_add_filter_bzip2(struct archive *_a)
+{
+	struct archive_write *a = (struct archive_write *)_a;
+	struct archive_write_filter *f = __archive_write_allocate_filter(_a);
+	struct private_data *data;
+
+	archive_check_magic(&a->archive, ARCHIVE_WRITE_MAGIC,
+	    ARCHIVE_STATE_NEW, "archive_write_add_filter_bzip2");
+
+	data = calloc(1, sizeof(*data));
+	if (data == NULL) {
+		archive_set_error(&a->archive, ENOMEM, "Out of memory");
+		return (ARCHIVE_FATAL);
+	}
+	data->compression_level = 9; /* default */
+
+	f->data = data;
+	f->options = &archive_compressor_bzip2_options;
+	f->close = &archive_compressor_bzip2_close;
+	f->free = &archive_compressor_bzip2_free;
+	f->open = &archive_compressor_bzip2_open;
+	f->code = ARCHIVE_FILTER_BZIP2;
+	f->name = "bzip2";
+#if defined(HAVE_BZLIB_H) && defined(BZ_CONFIG_ERROR)
+	return (ARCHIVE_OK);
+#else
+	data->pdata = __archive_write_program_allocate("bzip2");
+	if (data->pdata == NULL) {
+		free(data);
+		archive_set_error(&a->archive, ENOMEM, "Out of memory");
+		return (ARCHIVE_FATAL);
+	}
+	data->compression_level = 0;
+	archive_set_error(&a->archive, ARCHIVE_ERRNO_MISC,
+	    "Using external bzip2 program");
+	return (ARCHIVE_WARN);
+#endif
+}
+
+/*
+ * Set write options.
+ */
+static int
+archive_compressor_bzip2_options(struct archive_write_filter *f,
+    const char *key, const char *value)
+{
+	struct private_data *data = (struct private_data *)f->data;
+
+	if (strcmp(key, "compression-level") == 0) {
+		if (value == NULL || !(value[0] >= '0' && value[0] <= '9') ||
+		    value[1] != '\0')
+			return (ARCHIVE_WARN);
+		data->compression_level = value[0] - '0';
+		/* Make '0' be a synonym for '1'. */
+		/* This way, bzip2 compressor supports the same 0..9
+		 * range of levels as gzip. */
+		if (data->compression_level < 1)
+			data->compression_level = 1;
+		return (ARCHIVE_OK);
+	}
+
+	/* Note: The "warn" return is just to inform the options
+	 * supervisor that we didn't handle it.  It will generate
+	 * a suitable error if no one used this option. */
+	return (ARCHIVE_WARN);
+}
+
+#if defined(HAVE_BZLIB_H) && defined(BZ_CONFIG_ERROR)
+/* Don't compile this if we don't have bzlib. */
+
+/*
+ * Yuck.  bzlib.h is not const-correct, so I need this one bit
+ * of ugly hackery to convert a const * pointer to a non-const pointer.
+ */
+#define	SET_NEXT_IN(st,src)					\
+	(st)->stream.next_in = (char *)(uintptr_t)(const void *)(src)
+static int drive_compressor(struct archive_write_filter *,
+		    struct private_data *, int finishing);
+
+/*
+ * Setup callback.
+ */
+static int
+archive_compressor_bzip2_open(struct archive_write_filter *f)
+{
+	struct private_data *data = (struct private_data *)f->data;
+	int ret;
+
+	if (data->compressed == NULL) {
+		size_t bs = 65536, bpb;
+		if (f->archive->magic == ARCHIVE_WRITE_MAGIC) {
+			/* Buffer size should be a multiple number of the of bytes
+			 * per block for performance. */
+			bpb = archive_write_get_bytes_per_block(f->archive);
+			if (bpb > bs)
+				bs = bpb;
+			else if (bpb != 0)
+				bs -= bs % bpb;
+		}
+		data->compressed_buffer_size = bs;
+		data->compressed
+		    = (char *)malloc(data->compressed_buffer_size);
+		if (data->compressed == NULL) {
+			archive_set_error(f->archive, ENOMEM,
+			    "Can't allocate data for compression buffer");
+			return (ARCHIVE_FATAL);
+		}
+	}
+
+	memset(&data->stream, 0, sizeof(data->stream));
+	data->stream.next_out = data->compressed;
+	data->stream.avail_out = data->compressed_buffer_size;
+	f->write = archive_compressor_bzip2_write;
+
+	/* Initialize compression library */
+	ret = BZ2_bzCompressInit(&(data->stream),
+	    data->compression_level, 0, 30);
+	if (ret == BZ_OK) {
+		f->data = data;
+		return (ARCHIVE_OK);
+	}
+
+	/* Library setup failed: clean up. */
+	archive_set_error(f->archive, ARCHIVE_ERRNO_MISC,
+	    "Internal error initializing compression library");
+
+	/* Override the error message if we know what really went wrong. */
+	switch (ret) {
+	case BZ_PARAM_ERROR:
+		archive_set_error(f->archive, ARCHIVE_ERRNO_MISC,
+		    "Internal error initializing compression library: "
+		    "invalid setup parameter");
+		break;
+	case BZ_MEM_ERROR:
+		archive_set_error(f->archive, ENOMEM,
+		    "Internal error initializing compression library: "
+		    "out of memory");
+		break;
+	case BZ_CONFIG_ERROR:
+		archive_set_error(f->archive, ARCHIVE_ERRNO_MISC,
+		    "Internal error initializing compression library: "
+		    "mis-compiled library");
+		break;
+	}
+
+	return (ARCHIVE_FATAL);
+
+}
+
+/*
+ * Write data to the compressed stream.
+ *
+ * Returns ARCHIVE_OK if all data written, error otherwise.
+ */
+static int
+archive_compressor_bzip2_write(struct archive_write_filter *f,
+    const void *buff, size_t length)
+{
+	struct private_data *data = (struct private_data *)f->data;
+
+	/* Update statistics */
+	data->total_in += length;
+
+	/* Compress input data to output buffer */
+	SET_NEXT_IN(data, buff);
+	data->stream.avail_in = length;
+	if (drive_compressor(f, data, 0))
+		return (ARCHIVE_FATAL);
+	return (ARCHIVE_OK);
+}
+
+
+/*
+ * Finish the compression.
+ */
+static int
+archive_compressor_bzip2_close(struct archive_write_filter *f)
+{
+	struct private_data *data = (struct private_data *)f->data;
+	int ret;
+
+	/* Finish compression cycle. */
+	ret = drive_compressor(f, data, 1);
+	if (ret == ARCHIVE_OK) {
+		/* Write the last block */
+		ret = __archive_write_filter(f->next_filter,
+		    data->compressed,
+		    data->compressed_buffer_size - data->stream.avail_out);
+	}
+
+	switch (BZ2_bzCompressEnd(&(data->stream))) {
+	case BZ_OK:
+		break;
+	default:
+		archive_set_error(f->archive, ARCHIVE_ERRNO_PROGRAMMER,
+		    "Failed to clean up compressor");
+		ret = ARCHIVE_FATAL;
+	}
+	return ret;
+}
+
+static int
+archive_compressor_bzip2_free(struct archive_write_filter *f)
+{
+	struct private_data *data = (struct private_data *)f->data;
+	free(data->compressed);
+	free(data);
+	f->data = NULL;
+	return (ARCHIVE_OK);
+}
+
+/*
+ * Utility function to push input data through compressor, writing
+ * full output blocks as necessary.
+ *
+ * Note that this handles both the regular write case (finishing ==
+ * false) and the end-of-archive case (finishing == true).
+ */
+static int
+drive_compressor(struct archive_write_filter *f,
+    struct private_data *data, int finishing)
+{
+	int ret;
+
+	for (;;) {
+		if (data->stream.avail_out == 0) {
+			ret = __archive_write_filter(f->next_filter,
+			    data->compressed,
+			    data->compressed_buffer_size);
+			if (ret != ARCHIVE_OK) {
+				/* TODO: Handle this write failure */
+				return (ARCHIVE_FATAL);
+			}
+			data->stream.next_out = data->compressed;
+			data->stream.avail_out = data->compressed_buffer_size;
+		}
+
+		/* If there's nothing to do, we're done. */
+		if (!finishing && data->stream.avail_in == 0)
+			return (ARCHIVE_OK);
+
+		ret = BZ2_bzCompress(&(data->stream),
+		    finishing ? BZ_FINISH : BZ_RUN);
+
+		switch (ret) {
+		case BZ_RUN_OK:
+			/* In non-finishing case, did compressor
+			 * consume everything? */
+			if (!finishing && data->stream.avail_in == 0)
+				return (ARCHIVE_OK);
+			break;
+		case BZ_FINISH_OK:  /* Finishing: There's more work to do */
+			break;
+		case BZ_STREAM_END: /* Finishing: all done */
+			/* Only occurs in finishing case */
+			return (ARCHIVE_OK);
+		default:
+			/* Any other return value indicates an error */
+			archive_set_error(f->archive,
+			    ARCHIVE_ERRNO_PROGRAMMER,
+			    "Bzip2 compression failed;"
+			    " BZ2_bzCompress() returned %d",
+			    ret);
+			return (ARCHIVE_FATAL);
+		}
+	}
+}
+
+#else /* HAVE_BZLIB_H && BZ_CONFIG_ERROR */
+
+static int
+archive_compressor_bzip2_open(struct archive_write_filter *f)
+{
+	struct private_data *data = (struct private_data *)f->data;
+	struct archive_string as;
+	int r;
+
+	archive_string_init(&as);
+	archive_strcpy(&as, "bzip2");
+
+	/* Specify compression level. */
+	if (data->compression_level > 0) {
+		archive_strcat(&as, " -");
+		archive_strappend_char(&as, '0' + data->compression_level);
+	}
+	f->write = archive_compressor_bzip2_write;
+
+	r = __archive_write_program_open(f, data->pdata, as.s);
+	archive_string_free(&as);
+	return (r);
+}
+
+static int
+archive_compressor_bzip2_write(struct archive_write_filter *f, const void *buff,
+    size_t length)
+{
+	struct private_data *data = (struct private_data *)f->data;
+
+	return __archive_write_program_write(f, data->pdata, buff, length);
+}
+
+static int
+archive_compressor_bzip2_close(struct archive_write_filter *f)
+{
+	struct private_data *data = (struct private_data *)f->data;
+
+	return __archive_write_program_close(f, data->pdata);
+}
+
+static int
+archive_compressor_bzip2_free(struct archive_write_filter *f)
+{
+	struct private_data *data = (struct private_data *)f->data;
+
+	__archive_write_program_free(data->pdata);
+	free(data);
+	return (ARCHIVE_OK);
+}
+
+#endif /* HAVE_BZLIB_H && BZ_CONFIG_ERROR */